diff options
Diffstat (limited to 'drivers/media/pci/cx25821/cx25821-video-upstream.c')
| -rw-r--r-- | drivers/media/pci/cx25821/cx25821-video-upstream.c | 856 |
1 files changed, 856 insertions, 0 deletions
diff --git a/drivers/media/pci/cx25821/cx25821-video-upstream.c b/drivers/media/pci/cx25821/cx25821-video-upstream.c new file mode 100644 index 00000000000..52c13e0b649 --- /dev/null +++ b/drivers/media/pci/cx25821/cx25821-video-upstream.c @@ -0,0 +1,856 @@ +/* + * Driver for the Conexant CX25821 PCIe bridge + * + * Copyright (C) 2009 Conexant Systems Inc. + * Authors <hiep.huynh@conexant.com>, <shu.lin@conexant.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include "cx25821-video.h" +#include "cx25821-video-upstream.h" + +#include <linux/fs.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/syscalls.h> +#include <linux/file.h> +#include <linux/fcntl.h> +#include <linux/slab.h> +#include <linux/uaccess.h> + +MODULE_DESCRIPTION("v4l2 driver module for cx25821 based TV cards"); +MODULE_AUTHOR("Hiep Huynh <hiep.huynh@conexant.com>"); +MODULE_LICENSE("GPL"); + +static int _intr_msk = FLD_VID_SRC_RISC1 | FLD_VID_SRC_UF | FLD_VID_SRC_SYNC | + FLD_VID_SRC_OPC_ERR; + +int cx25821_sram_channel_setup_upstream(struct cx25821_dev *dev, + struct sram_channel *ch, + unsigned int bpl, u32 risc) +{ + unsigned int i, lines; + u32 cdt; + + if (ch->cmds_start == 0) { + cx_write(ch->ptr1_reg, 0); + cx_write(ch->ptr2_reg, 0); + cx_write(ch->cnt2_reg, 0); + cx_write(ch->cnt1_reg, 0); + return 0; + } + + bpl = (bpl + 7) & ~7; /* alignment */ + cdt = ch->cdt; + lines = ch->fifo_size / bpl; + + if (lines > 4) + lines = 4; + + BUG_ON(lines < 2); + + /* write CDT */ + for (i = 0; i < lines; i++) { + cx_write(cdt + 16 * i, ch->fifo_start + bpl * i); + cx_write(cdt + 16 * i + 4, 0); + cx_write(cdt + 16 * i + 8, 0); + cx_write(cdt + 16 * i + 12, 0); + } + + /* write CMDS */ + cx_write(ch->cmds_start + 0, risc); + + cx_write(ch->cmds_start + 4, 0); + cx_write(ch->cmds_start + 8, cdt); + cx_write(ch->cmds_start + 12, (lines * 16) >> 3); + cx_write(ch->cmds_start + 16, ch->ctrl_start); + + cx_write(ch->cmds_start + 20, VID_IQ_SIZE_DW); + + for (i = 24; i < 80; i += 4) + cx_write(ch->cmds_start + i, 0); + + /* fill registers */ + cx_write(ch->ptr1_reg, ch->fifo_start); + cx_write(ch->ptr2_reg, cdt); + cx_write(ch->cnt2_reg, (lines * 16) >> 3); + cx_write(ch->cnt1_reg, (bpl >> 3) - 1); + + return 0; +} + +static __le32 *cx25821_update_riscprogram(struct cx25821_dev *dev, + __le32 *rp, unsigned int offset, + unsigned int bpl, u32 sync_line, + unsigned int lines, int fifo_enable, + int field_type) +{ + unsigned int line, i; + int dist_betwn_starts = bpl * 2; + + *(rp++) = cpu_to_le32(RISC_RESYNC | sync_line); + + if (USE_RISC_NOOP_VIDEO) { + for (i = 0; i < NUM_NO_OPS; i++) + *(rp++) = cpu_to_le32(RISC_NOOP); + } + + /* scan lines */ + for (line = 0; line < lines; line++) { + *(rp++) = cpu_to_le32(RISC_READ | RISC_SOL | RISC_EOL | bpl); + *(rp++) = cpu_to_le32(dev->_data_buf_phys_addr + offset); + *(rp++) = cpu_to_le32(0); /* bits 63-32 */ + + if ((lines <= NTSC_FIELD_HEIGHT) + || (line < (NTSC_FIELD_HEIGHT - 1)) || !(dev->_isNTSC)) { + offset += dist_betwn_starts; + } + } + + return rp; +} + +static __le32 *cx25821_risc_field_upstream(struct cx25821_dev *dev, __le32 * rp, + dma_addr_t databuf_phys_addr, + unsigned int offset, u32 sync_line, + unsigned int bpl, unsigned int lines, + int fifo_enable, int field_type) +{ + unsigned int line, i; + struct sram_channel *sram_ch = + dev->channels[dev->_channel_upstream_select].sram_channels; + int dist_betwn_starts = bpl * 2; + + /* sync instruction */ + if (sync_line != NO_SYNC_LINE) + *(rp++) = cpu_to_le32(RISC_RESYNC | sync_line); + + if (USE_RISC_NOOP_VIDEO) { + for (i = 0; i < NUM_NO_OPS; i++) + *(rp++) = cpu_to_le32(RISC_NOOP); + } + + /* scan lines */ + for (line = 0; line < lines; line++) { + *(rp++) = cpu_to_le32(RISC_READ | RISC_SOL | RISC_EOL | bpl); + *(rp++) = cpu_to_le32(databuf_phys_addr + offset); + *(rp++) = cpu_to_le32(0); /* bits 63-32 */ + + if ((lines <= NTSC_FIELD_HEIGHT) + || (line < (NTSC_FIELD_HEIGHT - 1)) || !(dev->_isNTSC)) + /* to skip the other field line */ + offset += dist_betwn_starts; + + /* check if we need to enable the FIFO after the first 4 lines + * For the upstream video channel, the risc engine will enable + * the FIFO. */ + if (fifo_enable && line == 3) { + *(rp++) = RISC_WRITECR; + *(rp++) = sram_ch->dma_ctl; + *(rp++) = FLD_VID_FIFO_EN; + *(rp++) = 0x00000001; + } + } + + return rp; +} + +int cx25821_risc_buffer_upstream(struct cx25821_dev *dev, + struct pci_dev *pci, + unsigned int top_offset, + unsigned int bpl, unsigned int lines) +{ + __le32 *rp; + int fifo_enable = 0; + /* get line count for single field */ + int singlefield_lines = lines >> 1; + int odd_num_lines = singlefield_lines; + int frame = 0; + int frame_size = 0; + int databuf_offset = 0; + int risc_program_size = 0; + int risc_flag = RISC_CNT_RESET; + unsigned int bottom_offset = bpl; + dma_addr_t risc_phys_jump_addr; + + if (dev->_isNTSC) { + odd_num_lines = singlefield_lines + 1; + risc_program_size = FRAME1_VID_PROG_SIZE; + frame_size = (bpl == Y411_LINE_SZ) ? + FRAME_SIZE_NTSC_Y411 : FRAME_SIZE_NTSC_Y422; + } else { + risc_program_size = PAL_VID_PROG_SIZE; + frame_size = (bpl == Y411_LINE_SZ) ? + FRAME_SIZE_PAL_Y411 : FRAME_SIZE_PAL_Y422; + } + + /* Virtual address of Risc buffer program */ + rp = dev->_dma_virt_addr; + + for (frame = 0; frame < NUM_FRAMES; frame++) { + databuf_offset = frame_size * frame; + + if (UNSET != top_offset) { + fifo_enable = (frame == 0) ? FIFO_ENABLE : FIFO_DISABLE; + rp = cx25821_risc_field_upstream(dev, rp, + dev->_data_buf_phys_addr + + databuf_offset, top_offset, 0, bpl, + odd_num_lines, fifo_enable, ODD_FIELD); + } + + fifo_enable = FIFO_DISABLE; + + /* Even Field */ + rp = cx25821_risc_field_upstream(dev, rp, + dev->_data_buf_phys_addr + + databuf_offset, bottom_offset, + 0x200, bpl, singlefield_lines, + fifo_enable, EVEN_FIELD); + + if (frame == 0) { + risc_flag = RISC_CNT_RESET; + risc_phys_jump_addr = dev->_dma_phys_start_addr + + risc_program_size; + } else { + risc_phys_jump_addr = dev->_dma_phys_start_addr; + risc_flag = RISC_CNT_INC; + } + + /* Loop to 2ndFrameRISC or to Start of Risc + * program & generate IRQ + */ + *(rp++) = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | risc_flag); + *(rp++) = cpu_to_le32(risc_phys_jump_addr); + *(rp++) = cpu_to_le32(0); + } + + return 0; +} + +void cx25821_stop_upstream_video_ch1(struct cx25821_dev *dev) +{ + struct sram_channel *sram_ch = + dev->channels[VID_UPSTREAM_SRAM_CHANNEL_I].sram_channels; + u32 tmp = 0; + + if (!dev->_is_running) { + pr_info("No video file is currently running so return!\n"); + return; + } + /* Disable RISC interrupts */ + tmp = cx_read(sram_ch->int_msk); + cx_write(sram_ch->int_msk, tmp & ~_intr_msk); + + /* Turn OFF risc and fifo enable */ + tmp = cx_read(sram_ch->dma_ctl); + cx_write(sram_ch->dma_ctl, tmp & ~(FLD_VID_FIFO_EN | FLD_VID_RISC_EN)); + + /* Clear data buffer memory */ + if (dev->_data_buf_virt_addr) + memset(dev->_data_buf_virt_addr, 0, dev->_data_buf_size); + + dev->_is_running = 0; + dev->_is_first_frame = 0; + dev->_frame_count = 0; + dev->_file_status = END_OF_FILE; + + kfree(dev->_irq_queues); + dev->_irq_queues = NULL; + + kfree(dev->_filename); + + tmp = cx_read(VID_CH_MODE_SEL); + cx_write(VID_CH_MODE_SEL, tmp & 0xFFFFFE00); +} + +void cx25821_free_mem_upstream_ch1(struct cx25821_dev *dev) +{ + if (dev->_is_running) + cx25821_stop_upstream_video_ch1(dev); + + if (dev->_dma_virt_addr) { + pci_free_consistent(dev->pci, dev->_risc_size, + dev->_dma_virt_addr, dev->_dma_phys_addr); + dev->_dma_virt_addr = NULL; + } + + if (dev->_data_buf_virt_addr) { + pci_free_consistent(dev->pci, dev->_data_buf_size, + dev->_data_buf_virt_addr, + dev->_data_buf_phys_addr); + dev->_data_buf_virt_addr = NULL; + } +} + +int cx25821_get_frame(struct cx25821_dev *dev, struct sram_channel *sram_ch) +{ + struct file *myfile; + int frame_index_temp = dev->_frame_index; + int i = 0; + int line_size = (dev->_pixel_format == PIXEL_FRMT_411) ? + Y411_LINE_SZ : Y422_LINE_SZ; + int frame_size = 0; + int frame_offset = 0; + ssize_t vfs_read_retval = 0; + char mybuf[line_size]; + loff_t file_offset; + loff_t pos; + mm_segment_t old_fs; + + if (dev->_file_status == END_OF_FILE) + return 0; + + if (dev->_isNTSC) + frame_size = (line_size == Y411_LINE_SZ) ? + FRAME_SIZE_NTSC_Y411 : FRAME_SIZE_NTSC_Y422; + else + frame_size = (line_size == Y411_LINE_SZ) ? + FRAME_SIZE_PAL_Y411 : FRAME_SIZE_PAL_Y422; + + frame_offset = (frame_index_temp > 0) ? frame_size : 0; + file_offset = dev->_frame_count * frame_size; + + myfile = filp_open(dev->_filename, O_RDONLY | O_LARGEFILE, 0); + + if (IS_ERR(myfile)) { + const int open_errno = -PTR_ERR(myfile); + pr_err("%s(): ERROR opening file(%s) with errno = %d!\n", + __func__, dev->_filename, open_errno); + return PTR_ERR(myfile); + } else { + if (!(myfile->f_op)) { + pr_err("%s(): File has no file operations registered!\n", + __func__); + filp_close(myfile, NULL); + return -EIO; + } + + if (!myfile->f_op->read) { + pr_err("%s(): File has no READ operations registered!\n", + __func__); + filp_close(myfile, NULL); + return -EIO; + } + + pos = myfile->f_pos; + old_fs = get_fs(); + set_fs(KERNEL_DS); + + for (i = 0; i < dev->_lines_count; i++) { + pos = file_offset; + + vfs_read_retval = vfs_read(myfile, mybuf, line_size, + &pos); + + if (vfs_read_retval > 0 && vfs_read_retval == line_size + && dev->_data_buf_virt_addr != NULL) { + memcpy((void *)(dev->_data_buf_virt_addr + + frame_offset / 4), mybuf, + vfs_read_retval); + } + + file_offset += vfs_read_retval; + frame_offset += vfs_read_retval; + + if (vfs_read_retval < line_size) { + pr_info("Done: exit %s() since no more bytes to read from Video file\n", + __func__); + break; + } + } + + if (i > 0) + dev->_frame_count++; + + dev->_file_status = (vfs_read_retval == line_size) ? + IN_PROGRESS : END_OF_FILE; + + set_fs(old_fs); + filp_close(myfile, NULL); + } + + return 0; +} + +static void cx25821_vidups_handler(struct work_struct *work) +{ + struct cx25821_dev *dev = container_of(work, struct cx25821_dev, + _irq_work_entry); + + if (!dev) { + pr_err("ERROR %s(): since container_of(work_struct) FAILED!\n", + __func__); + return; + } + + cx25821_get_frame(dev, dev->channels[dev->_channel_upstream_select]. + sram_channels); +} + +int cx25821_openfile(struct cx25821_dev *dev, struct sram_channel *sram_ch) +{ + struct file *myfile; + int i = 0, j = 0; + int line_size = (dev->_pixel_format == PIXEL_FRMT_411) ? + Y411_LINE_SZ : Y422_LINE_SZ; + ssize_t vfs_read_retval = 0; + char mybuf[line_size]; + loff_t pos; + loff_t offset = (unsigned long)0; + mm_segment_t old_fs; + + myfile = filp_open(dev->_filename, O_RDONLY | O_LARGEFILE, 0); + + if (IS_ERR(myfile)) { + const int open_errno = -PTR_ERR(myfile); + pr_err("%s(): ERROR opening file(%s) with errno = %d!\n", + __func__, dev->_filename, open_errno); + return PTR_ERR(myfile); + } else { + if (!(myfile->f_op)) { + pr_err("%s(): File has no file operations registered!\n", + __func__); + filp_close(myfile, NULL); + return -EIO; + } + + if (!myfile->f_op->read) { + pr_err("%s(): File has no READ operations registered! Returning\n", + __func__); + filp_close(myfile, NULL); + return -EIO; + } + + pos = myfile->f_pos; + old_fs = get_fs(); + set_fs(KERNEL_DS); + + for (j = 0; j < NUM_FRAMES; j++) { + for (i = 0; i < dev->_lines_count; i++) { + pos = offset; + + vfs_read_retval = vfs_read(myfile, mybuf, + line_size, &pos); + + if (vfs_read_retval > 0 + && vfs_read_retval == line_size + && dev->_data_buf_virt_addr != NULL) { + memcpy((void *)(dev-> + _data_buf_virt_addr + + offset / 4), mybuf, + vfs_read_retval); + } + + offset += vfs_read_retval; + + if (vfs_read_retval < line_size) { + pr_info("Done: exit %s() since no more bytes to read from Video file\n", + __func__); + break; + } + } + + if (i > 0) + dev->_frame_count++; + + if (vfs_read_retval < line_size) + break; + } + + dev->_file_status = (vfs_read_retval == line_size) ? + IN_PROGRESS : END_OF_FILE; + + set_fs(old_fs); + myfile->f_pos = 0; + filp_close(myfile, NULL); + } + + return 0; +} + +int cx25821_upstream_buffer_prepare(struct cx25821_dev *dev, + struct sram_channel *sram_ch, int bpl) +{ + int ret = 0; + dma_addr_t dma_addr; + dma_addr_t data_dma_addr; + + if (dev->_dma_virt_addr != NULL) + pci_free_consistent(dev->pci, dev->upstream_riscbuf_size, + dev->_dma_virt_addr, dev->_dma_phys_addr); + + dev->_dma_virt_addr = pci_alloc_consistent(dev->pci, + dev->upstream_riscbuf_size, &dma_addr); + dev->_dma_virt_start_addr = dev->_dma_virt_addr; + dev->_dma_phys_start_addr = dma_addr; + dev->_dma_phys_addr = dma_addr; + dev->_risc_size = dev->upstream_riscbuf_size; + + if (!dev->_dma_virt_addr) { + pr_err("FAILED to allocate memory for Risc buffer! Returning\n"); + return -ENOMEM; + } + + /* Clear memory at address */ + memset(dev->_dma_virt_addr, 0, dev->_risc_size); + + if (dev->_data_buf_virt_addr != NULL) + pci_free_consistent(dev->pci, dev->upstream_databuf_size, + dev->_data_buf_virt_addr, + dev->_data_buf_phys_addr); + /* For Video Data buffer allocation */ + dev->_data_buf_virt_addr = pci_alloc_consistent(dev->pci, + dev->upstream_databuf_size, &data_dma_addr); + dev->_data_buf_phys_addr = data_dma_addr; + dev->_data_buf_size = dev->upstream_databuf_size; + + if (!dev->_data_buf_virt_addr) { + pr_err("FAILED to allocate memory for data buffer! Returning\n"); + return -ENOMEM; + } + + /* Clear memory at address */ + memset(dev->_data_buf_virt_addr, 0, dev->_data_buf_size); + + ret = cx25821_openfile(dev, sram_ch); + if (ret < 0) + return ret; + + /* Create RISC programs */ + ret = cx25821_risc_buffer_upstream(dev, dev->pci, 0, bpl, + dev->_lines_count); + if (ret < 0) { + pr_info("Failed creating Video Upstream Risc programs!\n"); + goto error; + } + + return 0; + +error: + return ret; +} + +int cx25821_video_upstream_irq(struct cx25821_dev *dev, int chan_num, + u32 status) +{ + u32 int_msk_tmp; + struct sram_channel *channel = dev->channels[chan_num].sram_channels; + int singlefield_lines = NTSC_FIELD_HEIGHT; + int line_size_in_bytes = Y422_LINE_SZ; + int odd_risc_prog_size = 0; + dma_addr_t risc_phys_jump_addr; + __le32 *rp; + + if (status & FLD_VID_SRC_RISC1) { + /* We should only process one program per call */ + u32 prog_cnt = cx_read(channel->gpcnt); + + /* Since we've identified our IRQ, clear our bits from the + * interrupt mask and interrupt status registers */ + int_msk_tmp = cx_read(channel->int_msk); + cx_write(channel->int_msk, int_msk_tmp & ~_intr_msk); + cx_write(channel->int_stat, _intr_msk); + + spin_lock(&dev->slock); + + dev->_frame_index = prog_cnt; + + queue_work(dev->_irq_queues, &dev->_irq_work_entry); + + if (dev->_is_first_frame) { + dev->_is_first_frame = 0; + + if (dev->_isNTSC) { + singlefield_lines += 1; + odd_risc_prog_size = ODD_FLD_NTSC_PROG_SIZE; + } else { + singlefield_lines = PAL_FIELD_HEIGHT; + odd_risc_prog_size = ODD_FLD_PAL_PROG_SIZE; + } + + if (dev->_dma_virt_start_addr != NULL) { + line_size_in_bytes = + (dev->_pixel_format == + PIXEL_FRMT_411) ? Y411_LINE_SZ : + Y422_LINE_SZ; + risc_phys_jump_addr = + dev->_dma_phys_start_addr + + odd_risc_prog_size; + + rp = cx25821_update_riscprogram(dev, + dev->_dma_virt_start_addr, TOP_OFFSET, + line_size_in_bytes, 0x0, + singlefield_lines, FIFO_DISABLE, + ODD_FIELD); + + /* Jump to Even Risc program of 1st Frame */ + *(rp++) = cpu_to_le32(RISC_JUMP); + *(rp++) = cpu_to_le32(risc_phys_jump_addr); + *(rp++) = cpu_to_le32(0); + } + } + + spin_unlock(&dev->slock); + } else { + if (status & FLD_VID_SRC_UF) + pr_err("%s(): Video Received Underflow Error Interrupt!\n", + __func__); + + if (status & FLD_VID_SRC_SYNC) + pr_err("%s(): Video Received Sync Error Interrupt!\n", + __func__); + + if (status & FLD_VID_SRC_OPC_ERR) + pr_err("%s(): Video Received OpCode Error Interrupt!\n", + __func__); + } + + if (dev->_file_status == END_OF_FILE) { + pr_err("EOF Channel 1 Framecount = %d\n", dev->_frame_count); + return -1; + } + /* ElSE, set the interrupt mask register, re-enable irq. */ + int_msk_tmp = cx_read(channel->int_msk); + cx_write(channel->int_msk, int_msk_tmp |= _intr_msk); + + return 0; +} + +static irqreturn_t cx25821_upstream_irq(int irq, void *dev_id) +{ + struct cx25821_dev *dev = dev_id; + u32 vid_status; + int handled = 0; + int channel_num = 0; + struct sram_channel *sram_ch; + + if (!dev) + return -1; + + channel_num = VID_UPSTREAM_SRAM_CHANNEL_I; + + sram_ch = dev->channels[channel_num].sram_channels; + + vid_status = cx_read(sram_ch->int_stat); + + /* Only deal with our interrupt */ + if (vid_status) + handled = cx25821_video_upstream_irq(dev, channel_num, + vid_status); + + if (handled < 0) + cx25821_stop_upstream_video_ch1(dev); + else + handled += handled; + + return IRQ_RETVAL(handled); +} + +void cx25821_set_pixelengine(struct cx25821_dev *dev, struct sram_channel *ch, + int pix_format) +{ + int width = WIDTH_D1; + int height = dev->_lines_count; + int num_lines, odd_num_lines; + u32 value; + int vip_mode = OUTPUT_FRMT_656; + + value = ((pix_format & 0x3) << 12) | (vip_mode & 0x7); + value &= 0xFFFFFFEF; + value |= dev->_isNTSC ? 0 : 0x10; + cx_write(ch->vid_fmt_ctl, value); + + /* set number of active pixels in each line. + * Default is 720 pixels in both NTSC and PAL format */ + cx_write(ch->vid_active_ctl1, width); + + num_lines = (height / 2) & 0x3FF; + odd_num_lines = num_lines; + + if (dev->_isNTSC) + odd_num_lines += 1; + + value = (num_lines << 16) | odd_num_lines; + + /* set number of active lines in field 0 (top) and field 1 (bottom) */ + cx_write(ch->vid_active_ctl2, value); + + cx_write(ch->vid_cdt_size, VID_CDT_SIZE >> 3); +} + +int cx25821_start_video_dma_upstream(struct cx25821_dev *dev, + struct sram_channel *sram_ch) +{ + u32 tmp = 0; + int err = 0; + + /* 656/VIP SRC Upstream Channel I & J and 7 - Host Bus Interface for + * channel A-C + */ + tmp = cx_read(VID_CH_MODE_SEL); + cx_write(VID_CH_MODE_SEL, tmp | 0x1B0001FF); + + /* Set the physical start address of the RISC program in the initial + * program counter(IPC) member of the cmds. + */ + cx_write(sram_ch->cmds_start + 0, dev->_dma_phys_addr); + /* Risc IPC High 64 bits 63-32 */ + cx_write(sram_ch->cmds_start + 4, 0); + + /* reset counter */ + cx_write(sram_ch->gpcnt_ctl, 3); + + /* Clear our bits from the interrupt status register. */ + cx_write(sram_ch->int_stat, _intr_msk); + + /* Set the interrupt mask register, enable irq. */ + cx_set(PCI_INT_MSK, cx_read(PCI_INT_MSK) | (1 << sram_ch->irq_bit)); + tmp = cx_read(sram_ch->int_msk); + cx_write(sram_ch->int_msk, tmp |= _intr_msk); + + err = request_irq(dev->pci->irq, cx25821_upstream_irq, + IRQF_SHARED, dev->name, dev); + if (err < 0) { + pr_err("%s: can't get upstream IRQ %d\n", + dev->name, dev->pci->irq); + goto fail_irq; + } + + /* Start the DMA engine */ + tmp = cx_read(sram_ch->dma_ctl); + cx_set(sram_ch->dma_ctl, tmp | FLD_VID_RISC_EN); + + dev->_is_running = 1; + dev->_is_first_frame = 1; + + return 0; + +fail_irq: + cx25821_dev_unregister(dev); + return err; +} + +int cx25821_vidupstream_init_ch1(struct cx25821_dev *dev, int channel_select, + int pixel_format) +{ + struct sram_channel *sram_ch; + u32 tmp; + int retval = 0; + int err = 0; + int data_frame_size = 0; + int risc_buffer_size = 0; + int str_length = 0; + + if (dev->_is_running) { + pr_info("Video Channel is still running so return!\n"); + return 0; + } + + dev->_channel_upstream_select = channel_select; + sram_ch = dev->channels[channel_select].sram_channels; + + INIT_WORK(&dev->_irq_work_entry, cx25821_vidups_handler); + dev->_irq_queues = create_singlethread_workqueue("cx25821_workqueue"); + + if (!dev->_irq_queues) { + pr_err("create_singlethread_workqueue() for Video FAILED!\n"); + return -ENOMEM; + } + /* 656/VIP SRC Upstream Channel I & J and 7 - Host Bus Interface for + * channel A-C + */ + tmp = cx_read(VID_CH_MODE_SEL); + cx_write(VID_CH_MODE_SEL, tmp | 0x1B0001FF); + + dev->_is_running = 0; + dev->_frame_count = 0; + dev->_file_status = RESET_STATUS; + dev->_lines_count = dev->_isNTSC ? 480 : 576; + dev->_pixel_format = pixel_format; + dev->_line_size = (dev->_pixel_format == PIXEL_FRMT_422) ? + (WIDTH_D1 * 2) : (WIDTH_D1 * 3) / 2; + data_frame_size = dev->_isNTSC ? NTSC_DATA_BUF_SZ : PAL_DATA_BUF_SZ; + risc_buffer_size = dev->_isNTSC ? + NTSC_RISC_BUF_SIZE : PAL_RISC_BUF_SIZE; + + if (dev->input_filename) { + str_length = strlen(dev->input_filename); + dev->_filename = kmemdup(dev->input_filename, str_length + 1, + GFP_KERNEL); + + if (!dev->_filename) + goto error; + } else { + str_length = strlen(dev->_defaultname); + dev->_filename = kmemdup(dev->_defaultname, str_length + 1, + GFP_KERNEL); + + if (!dev->_filename) + goto error; + } + + /* Default if filename is empty string */ + if (strcmp(dev->input_filename, "") == 0) { + if (dev->_isNTSC) { + dev->_filename = + (dev->_pixel_format == PIXEL_FRMT_411) ? + "/root/vid411.yuv" : "/root/vidtest.yuv"; + } else { + dev->_filename = + (dev->_pixel_format == PIXEL_FRMT_411) ? + "/root/pal411.yuv" : "/root/pal422.yuv"; + } + } + + dev->_is_running = 0; + dev->_frame_count = 0; + dev->_file_status = RESET_STATUS; + dev->_lines_count = dev->_isNTSC ? 480 : 576; + dev->_pixel_format = pixel_format; + dev->_line_size = (dev->_pixel_format == PIXEL_FRMT_422) ? + (WIDTH_D1 * 2) : (WIDTH_D1 * 3) / 2; + + retval = cx25821_sram_channel_setup_upstream(dev, sram_ch, + dev->_line_size, 0); + + /* setup fifo + format */ + cx25821_set_pixelengine(dev, sram_ch, dev->_pixel_format); + + dev->upstream_riscbuf_size = risc_buffer_size * 2; + dev->upstream_databuf_size = data_frame_size * 2; + + /* Allocating buffers and prepare RISC program */ + retval = cx25821_upstream_buffer_prepare(dev, sram_ch, dev->_line_size); + if (retval < 0) { + pr_err("%s: Failed to set up Video upstream buffers!\n", + dev->name); + goto error; + } + + cx25821_start_video_dma_upstream(dev, sram_ch); + + return 0; + +error: + cx25821_dev_unregister(dev); + + return err; +} |