diff options
Diffstat (limited to 'drivers/media/video/m5mols/m5mols_capture.c')
| -rw-r--r-- | drivers/media/video/m5mols/m5mols_capture.c | 191 |
1 files changed, 191 insertions, 0 deletions
diff --git a/drivers/media/video/m5mols/m5mols_capture.c b/drivers/media/video/m5mols/m5mols_capture.c new file mode 100644 index 00000000000..d71a3903b60 --- /dev/null +++ b/drivers/media/video/m5mols/m5mols_capture.c @@ -0,0 +1,191 @@ +/* + * The Capture code for Fujitsu M-5MOLS ISP + * + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * Author: HeungJun Kim, riverful.kim@samsung.com + * + * Copyright (C) 2009 Samsung Electronics Co., Ltd. + * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/version.h> +#include <linux/gpio.h> +#include <linux/regulator/consumer.h> +#include <linux/videodev2.h> +#include <linux/version.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-subdev.h> +#include <media/m5mols.h> + +#include "m5mols.h" +#include "m5mols_reg.h" + +static int m5mols_capture_error_handler(struct m5mols_info *info, + int timeout) +{ + int ret; + + /* Disable all interrupts and clear relevant interrupt staus bits */ + ret = m5mols_write(&info->sd, SYSTEM_INT_ENABLE, + info->interrupt & ~(REG_INT_CAPTURE)); + if (ret) + return ret; + + if (timeout == 0) + return -ETIMEDOUT; + + return 0; +} +/** + * m5mols_read_rational - I2C read of a rational number + * + * Read numerator and denominator from registers @addr_num and @addr_den + * respectively and return the division result in @val. + */ +static int m5mols_read_rational(struct v4l2_subdev *sd, u32 addr_num, + u32 addr_den, u32 *val) +{ + u32 num, den; + + int ret = m5mols_read(sd, addr_num, &num); + if (!ret) + ret = m5mols_read(sd, addr_den, &den); + if (ret) + return ret; + *val = den == 0 ? 0 : num / den; + return ret; +} + +/** + * m5mols_capture_info - Gather captured image information + * + * For now it gathers only EXIF information and file size. + */ +static int m5mols_capture_info(struct m5mols_info *info) +{ + struct m5mols_exif *exif = &info->cap.exif; + struct v4l2_subdev *sd = &info->sd; + int ret; + + ret = m5mols_read_rational(sd, EXIF_INFO_EXPTIME_NU, + EXIF_INFO_EXPTIME_DE, &exif->exposure_time); + if (ret) + return ret; + ret = m5mols_read_rational(sd, EXIF_INFO_TV_NU, EXIF_INFO_TV_DE, + &exif->shutter_speed); + if (ret) + return ret; + ret = m5mols_read_rational(sd, EXIF_INFO_AV_NU, EXIF_INFO_AV_DE, + &exif->aperture); + if (ret) + return ret; + ret = m5mols_read_rational(sd, EXIF_INFO_BV_NU, EXIF_INFO_BV_DE, + &exif->brightness); + if (ret) + return ret; + ret = m5mols_read_rational(sd, EXIF_INFO_EBV_NU, EXIF_INFO_EBV_DE, + &exif->exposure_bias); + if (ret) + return ret; + + ret = m5mols_read(sd, EXIF_INFO_ISO, (u32 *)&exif->iso_speed); + if (!ret) + ret = m5mols_read(sd, EXIF_INFO_FLASH, (u32 *)&exif->flash); + if (!ret) + ret = m5mols_read(sd, EXIF_INFO_SDR, (u32 *)&exif->sdr); + if (!ret) + ret = m5mols_read(sd, EXIF_INFO_QVAL, (u32 *)&exif->qval); + if (ret) + return ret; + + if (!ret) + ret = m5mols_read(sd, CAPC_IMAGE_SIZE, &info->cap.main); + if (!ret) + ret = m5mols_read(sd, CAPC_THUMB_SIZE, &info->cap.thumb); + if (!ret) + info->cap.total = info->cap.main + info->cap.thumb; + + return ret; +} + +int m5mols_start_capture(struct m5mols_info *info) +{ + struct v4l2_subdev *sd = &info->sd; + u32 resolution = info->resolution; + int timeout; + int ret; + + /* + * Preparing capture. Setting control & interrupt before entering + * capture mode + * + * 1) change to MONITOR mode for operating control & interrupt + * 2) set controls (considering v4l2_control value & lock 3A) + * 3) set interrupt + * 4) change to CAPTURE mode + */ + ret = m5mols_mode(info, REG_MONITOR); + if (!ret) + ret = m5mols_sync_controls(info); + if (!ret) + ret = m5mols_lock_3a(info, true); + if (!ret) + ret = m5mols_enable_interrupt(sd, REG_INT_CAPTURE); + if (!ret) + ret = m5mols_mode(info, REG_CAPTURE); + if (!ret) { + /* Wait for capture interrupt, after changing capture mode */ + timeout = wait_event_interruptible_timeout(info->irq_waitq, + test_bit(ST_CAPT_IRQ, &info->flags), + msecs_to_jiffies(2000)); + if (test_and_clear_bit(ST_CAPT_IRQ, &info->flags)) + ret = m5mols_capture_error_handler(info, timeout); + } + if (!ret) + ret = m5mols_lock_3a(info, false); + if (ret) + return ret; + /* + * Starting capture. Setting capture frame count and resolution and + * the format(available format: JPEG, Bayer RAW, YUV). + * + * 1) select single or multi(enable to 25), format, size + * 2) set interrupt + * 3) start capture(for main image, now) + * 4) get information + * 5) notify file size to v4l2 device(e.g, to s5p-fimc v4l2 device) + */ + ret = m5mols_write(sd, CAPC_SEL_FRAME, 1); + if (!ret) + ret = m5mols_write(sd, CAPP_YUVOUT_MAIN, REG_JPEG); + if (!ret) + ret = m5mols_write(sd, CAPP_MAIN_IMAGE_SIZE, resolution); + if (!ret) + ret = m5mols_enable_interrupt(sd, REG_INT_CAPTURE); + if (!ret) + ret = m5mols_write(sd, CAPC_START, REG_CAP_START_MAIN); + if (!ret) { + /* Wait for the capture completion interrupt */ + timeout = wait_event_interruptible_timeout(info->irq_waitq, + test_bit(ST_CAPT_IRQ, &info->flags), + msecs_to_jiffies(2000)); + if (test_and_clear_bit(ST_CAPT_IRQ, &info->flags)) { + ret = m5mols_capture_info(info); + if (!ret) + v4l2_subdev_notify(sd, 0, &info->cap.total); + } + } + + return m5mols_capture_error_handler(info, timeout); +} |