summaryrefslogtreecommitdiffstats
path: root/drivers/media/video/ovcamchip
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/video/ovcamchip')
-rw-r--r--drivers/media/video/ovcamchip/Makefile4
-rw-r--r--drivers/media/video/ovcamchip/ov6x20.c415
-rw-r--r--drivers/media/video/ovcamchip/ov6x30.c374
-rw-r--r--drivers/media/video/ovcamchip/ov76be.c303
-rw-r--r--drivers/media/video/ovcamchip/ov7x10.c335
-rw-r--r--drivers/media/video/ovcamchip/ov7x20.c455
-rw-r--r--drivers/media/video/ovcamchip/ovcamchip_core.c444
-rw-r--r--drivers/media/video/ovcamchip/ovcamchip_priv.h87
8 files changed, 2417 insertions, 0 deletions
diff --git a/drivers/media/video/ovcamchip/Makefile b/drivers/media/video/ovcamchip/Makefile
new file mode 100644
index 00000000000..bca41ad93de
--- /dev/null
+++ b/drivers/media/video/ovcamchip/Makefile
@@ -0,0 +1,4 @@
+ovcamchip-objs := ovcamchip_core.o ov6x20.o ov6x30.o ov7x10.o ov7x20.o \
+ ov76be.o
+
+obj-$(CONFIG_VIDEO_OVCAMCHIP) += ovcamchip.o
diff --git a/drivers/media/video/ovcamchip/ov6x20.c b/drivers/media/video/ovcamchip/ov6x20.c
new file mode 100644
index 00000000000..3433619ad93
--- /dev/null
+++ b/drivers/media/video/ovcamchip/ov6x20.c
@@ -0,0 +1,415 @@
+/* OmniVision OV6620/OV6120 Camera Chip Support Code
+ *
+ * Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org>
+ * http://alpha.dyndns.org/ov511/
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
+ */
+
+#define DEBUG
+
+#include <linux/slab.h>
+#include "ovcamchip_priv.h"
+
+/* Registers */
+#define REG_GAIN 0x00 /* gain [5:0] */
+#define REG_BLUE 0x01 /* blue gain */
+#define REG_RED 0x02 /* red gain */
+#define REG_SAT 0x03 /* saturation */
+#define REG_CNT 0x05 /* Y contrast */
+#define REG_BRT 0x06 /* Y brightness */
+#define REG_WB_BLUE 0x0C /* WB blue ratio [5:0] */
+#define REG_WB_RED 0x0D /* WB red ratio [5:0] */
+#define REG_EXP 0x10 /* exposure */
+
+/* Window parameters */
+#define HWSBASE 0x38
+#define HWEBASE 0x3A
+#define VWSBASE 0x05
+#define VWEBASE 0x06
+
+struct ov6x20 {
+ int auto_brt;
+ int auto_exp;
+ int backlight;
+ int bandfilt;
+ int mirror;
+};
+
+/* Initial values for use with OV511/OV511+ cameras */
+static struct ovcamchip_regvals regvals_init_6x20_511[] = {
+ { 0x12, 0x80 }, /* reset */
+ { 0x11, 0x01 },
+ { 0x03, 0x60 },
+ { 0x05, 0x7f }, /* For when autoadjust is off */
+ { 0x07, 0xa8 },
+ { 0x0c, 0x24 },
+ { 0x0d, 0x24 },
+ { 0x0f, 0x15 }, /* COMS */
+ { 0x10, 0x75 }, /* AEC Exposure time */
+ { 0x12, 0x24 }, /* Enable AGC and AWB */
+ { 0x14, 0x04 },
+ { 0x16, 0x03 },
+ { 0x26, 0xb2 }, /* BLC enable */
+ /* 0x28: 0x05 Selects RGB format if RGB on */
+ { 0x28, 0x05 },
+ { 0x2a, 0x04 }, /* Disable framerate adjust */
+ { 0x2d, 0x99 },
+ { 0x33, 0xa0 }, /* Color Processing Parameter */
+ { 0x34, 0xd2 }, /* Max A/D range */
+ { 0x38, 0x8b },
+ { 0x39, 0x40 },
+
+ { 0x3c, 0x39 }, /* Enable AEC mode changing */
+ { 0x3c, 0x3c }, /* Change AEC mode */
+ { 0x3c, 0x24 }, /* Disable AEC mode changing */
+
+ { 0x3d, 0x80 },
+ /* These next two registers (0x4a, 0x4b) are undocumented. They
+ * control the color balance */
+ { 0x4a, 0x80 },
+ { 0x4b, 0x80 },
+ { 0x4d, 0xd2 }, /* This reduces noise a bit */
+ { 0x4e, 0xc1 },
+ { 0x4f, 0x04 },
+ { 0xff, 0xff }, /* END MARKER */
+};
+
+/* Initial values for use with OV518 cameras */
+static struct ovcamchip_regvals regvals_init_6x20_518[] = {
+ { 0x12, 0x80 }, /* Do a reset */
+ { 0x03, 0xc0 }, /* Saturation */
+ { 0x05, 0x8a }, /* Contrast */
+ { 0x0c, 0x24 }, /* AWB blue */
+ { 0x0d, 0x24 }, /* AWB red */
+ { 0x0e, 0x8d }, /* Additional 2x gain */
+ { 0x0f, 0x25 }, /* Black expanding level = 1.3V */
+ { 0x11, 0x01 }, /* Clock div. */
+ { 0x12, 0x24 }, /* Enable AGC and AWB */
+ { 0x13, 0x01 }, /* (default) */
+ { 0x14, 0x80 }, /* Set reserved bit 7 */
+ { 0x15, 0x01 }, /* (default) */
+ { 0x16, 0x03 }, /* (default) */
+ { 0x17, 0x38 }, /* (default) */
+ { 0x18, 0xea }, /* (default) */
+ { 0x19, 0x04 },
+ { 0x1a, 0x93 },
+ { 0x1b, 0x00 }, /* (default) */
+ { 0x1e, 0xc4 }, /* (default) */
+ { 0x1f, 0x04 }, /* (default) */
+ { 0x20, 0x20 }, /* Enable 1st stage aperture correction */
+ { 0x21, 0x10 }, /* Y offset */
+ { 0x22, 0x88 }, /* U offset */
+ { 0x23, 0xc0 }, /* Set XTAL power level */
+ { 0x24, 0x53 }, /* AEC bright ratio */
+ { 0x25, 0x7a }, /* AEC black ratio */
+ { 0x26, 0xb2 }, /* BLC enable */
+ { 0x27, 0xa2 }, /* Full output range */
+ { 0x28, 0x01 }, /* (default) */
+ { 0x29, 0x00 }, /* (default) */
+ { 0x2a, 0x84 }, /* (default) */
+ { 0x2b, 0xa8 }, /* Set custom frame rate */
+ { 0x2c, 0xa0 }, /* (reserved) */
+ { 0x2d, 0x95 }, /* Enable banding filter */
+ { 0x2e, 0x88 }, /* V offset */
+ { 0x33, 0x22 }, /* Luminance gamma on */
+ { 0x34, 0xc7 }, /* A/D bias */
+ { 0x36, 0x12 }, /* (reserved) */
+ { 0x37, 0x63 }, /* (reserved) */
+ { 0x38, 0x8b }, /* Quick AEC/AEB */
+ { 0x39, 0x00 }, /* (default) */
+ { 0x3a, 0x0f }, /* (default) */
+ { 0x3b, 0x3c }, /* (default) */
+ { 0x3c, 0x5c }, /* AEC controls */
+ { 0x3d, 0x80 }, /* Drop 1 (bad) frame when AEC change */
+ { 0x3e, 0x80 }, /* (default) */
+ { 0x3f, 0x02 }, /* (default) */
+ { 0x40, 0x10 }, /* (reserved) */
+ { 0x41, 0x10 }, /* (reserved) */
+ { 0x42, 0x00 }, /* (reserved) */
+ { 0x43, 0x7f }, /* (reserved) */
+ { 0x44, 0x80 }, /* (reserved) */
+ { 0x45, 0x1c }, /* (reserved) */
+ { 0x46, 0x1c }, /* (reserved) */
+ { 0x47, 0x80 }, /* (reserved) */
+ { 0x48, 0x5f }, /* (reserved) */
+ { 0x49, 0x00 }, /* (reserved) */
+ { 0x4a, 0x00 }, /* Color balance (undocumented) */
+ { 0x4b, 0x80 }, /* Color balance (undocumented) */
+ { 0x4c, 0x58 }, /* (reserved) */
+ { 0x4d, 0xd2 }, /* U *= .938, V *= .838 */
+ { 0x4e, 0xa0 }, /* (default) */
+ { 0x4f, 0x04 }, /* UV 3-point average */
+ { 0x50, 0xff }, /* (reserved) */
+ { 0x51, 0x58 }, /* (reserved) */
+ { 0x52, 0xc0 }, /* (reserved) */
+ { 0x53, 0x42 }, /* (reserved) */
+ { 0x27, 0xa6 }, /* Enable manual offset adj. (reg 21 & 22) */
+ { 0x12, 0x20 },
+ { 0x12, 0x24 },
+
+ { 0xff, 0xff }, /* END MARKER */
+};
+
+/* This initializes the OV6x20 camera chip and relevant variables. */
+static int ov6x20_init(struct i2c_client *c)
+{
+ struct ovcamchip *ov = i2c_get_clientdata(c);
+ struct ov6x20 *s;
+ int rc;
+
+ DDEBUG(4, &c->dev, "entered");
+
+ switch (c->adapter->id) {
+ case I2C_ALGO_SMBUS | I2C_HW_SMBUS_OV511:
+ rc = ov_write_regvals(c, regvals_init_6x20_511);
+ break;
+ case I2C_ALGO_SMBUS | I2C_HW_SMBUS_OV518:
+ rc = ov_write_regvals(c, regvals_init_6x20_518);
+ break;
+ default:
+ dev_err(&c->dev, "ov6x20: Unsupported adapter\n");
+ rc = -ENODEV;
+ }
+
+ if (rc < 0)
+ return rc;
+
+ ov->spriv = s = kmalloc(sizeof *s, GFP_KERNEL);
+ if (!s)
+ return -ENOMEM;
+ memset(s, 0, sizeof *s);
+
+ s->auto_brt = 1;
+ s->auto_exp = 1;
+
+ return rc;
+}
+
+static int ov6x20_free(struct i2c_client *c)
+{
+ struct ovcamchip *ov = i2c_get_clientdata(c);
+
+ kfree(ov->spriv);
+ return 0;
+}
+
+static int ov6x20_set_control(struct i2c_client *c,
+ struct ovcamchip_control *ctl)
+{
+ struct ovcamchip *ov = i2c_get_clientdata(c);
+ struct ov6x20 *s = ov->spriv;
+ int rc;
+ int v = ctl->value;
+
+ switch (ctl->id) {
+ case OVCAMCHIP_CID_CONT:
+ rc = ov_write(c, REG_CNT, v >> 8);
+ break;
+ case OVCAMCHIP_CID_BRIGHT:
+ rc = ov_write(c, REG_BRT, v >> 8);
+ break;
+ case OVCAMCHIP_CID_SAT:
+ rc = ov_write(c, REG_SAT, v >> 8);
+ break;
+ case OVCAMCHIP_CID_HUE:
+ rc = ov_write(c, REG_RED, 0xFF - (v >> 8));
+ if (rc < 0)
+ goto out;
+
+ rc = ov_write(c, REG_BLUE, v >> 8);
+ break;
+ case OVCAMCHIP_CID_EXP:
+ rc = ov_write(c, REG_EXP, v);
+ break;
+ case OVCAMCHIP_CID_FREQ:
+ {
+ int sixty = (v == 60);
+
+ rc = ov_write(c, 0x2b, sixty?0xa8:0x28);
+ if (rc < 0)
+ goto out;
+
+ rc = ov_write(c, 0x2a, sixty?0x84:0xa4);
+ break;
+ }
+ case OVCAMCHIP_CID_BANDFILT:
+ rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04);
+ s->bandfilt = v;
+ break;
+ case OVCAMCHIP_CID_AUTOBRIGHT:
+ rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10);
+ s->auto_brt = v;
+ break;
+ case OVCAMCHIP_CID_AUTOEXP:
+ rc = ov_write_mask(c, 0x13, v?0x01:0x00, 0x01);
+ s->auto_exp = v;
+ break;
+ case OVCAMCHIP_CID_BACKLIGHT:
+ {
+ rc = ov_write_mask(c, 0x4e, v?0xe0:0xc0, 0xe0);
+ if (rc < 0)
+ goto out;
+
+ rc = ov_write_mask(c, 0x29, v?0x08:0x00, 0x08);
+ if (rc < 0)
+ goto out;
+
+ rc = ov_write_mask(c, 0x0e, v?0x80:0x00, 0x80);
+ s->backlight = v;
+ break;
+ }
+ case OVCAMCHIP_CID_MIRROR:
+ rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40);
+ s->mirror = v;
+ break;
+ default:
+ DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
+ return -EPERM;
+ }
+
+out:
+ DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc);
+ return rc;
+}
+
+static int ov6x20_get_control(struct i2c_client *c,
+ struct ovcamchip_control *ctl)
+{
+ struct ovcamchip *ov = i2c_get_clientdata(c);
+ struct ov6x20 *s = ov->spriv;
+ int rc = 0;
+ unsigned char val = 0;
+
+ switch (ctl->id) {
+ case OVCAMCHIP_CID_CONT:
+ rc = ov_read(c, REG_CNT, &val);
+ ctl->value = val << 8;
+ break;
+ case OVCAMCHIP_CID_BRIGHT:
+ rc = ov_read(c, REG_BRT, &val);
+ ctl->value = val << 8;
+ break;
+ case OVCAMCHIP_CID_SAT:
+ rc = ov_read(c, REG_SAT, &val);
+ ctl->value = val << 8;
+ break;
+ case OVCAMCHIP_CID_HUE:
+ rc = ov_read(c, REG_BLUE, &val);
+ ctl->value = val << 8;
+ break;
+ case OVCAMCHIP_CID_EXP:
+ rc = ov_read(c, REG_EXP, &val);
+ ctl->value = val;
+ break;
+ case OVCAMCHIP_CID_BANDFILT:
+ ctl->value = s->bandfilt;
+ break;
+ case OVCAMCHIP_CID_AUTOBRIGHT:
+ ctl->value = s->auto_brt;
+ break;
+ case OVCAMCHIP_CID_AUTOEXP:
+ ctl->value = s->auto_exp;
+ break;
+ case OVCAMCHIP_CID_BACKLIGHT:
+ ctl->value = s->backlight;
+ break;
+ case OVCAMCHIP_CID_MIRROR:
+ ctl->value = s->mirror;
+ break;
+ default:
+ DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
+ return -EPERM;
+ }
+
+ DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc);
+ return rc;
+}
+
+static int ov6x20_mode_init(struct i2c_client *c, struct ovcamchip_window *win)
+{
+ /******** QCIF-specific regs ********/
+
+ ov_write(c, 0x14, win->quarter?0x24:0x04);
+
+ /******** Palette-specific regs ********/
+
+ /* OV518 needs 8 bit multiplexed in color mode, and 16 bit in B&W */
+ if (c->adapter->id == (I2C_ALGO_SMBUS | I2C_HW_SMBUS_OV518)) {
+ if (win->format == VIDEO_PALETTE_GREY)
+ ov_write_mask(c, 0x13, 0x00, 0x20);
+ else
+ ov_write_mask(c, 0x13, 0x20, 0x20);
+ } else {
+ if (win->format == VIDEO_PALETTE_GREY)
+ ov_write_mask(c, 0x13, 0x20, 0x20);
+ else
+ ov_write_mask(c, 0x13, 0x00, 0x20);
+ }
+
+ /******** Clock programming ********/
+
+ /* The OV6620 needs special handling. This prevents the
+ * severe banding that normally occurs */
+
+ /* Clock down */
+ ov_write(c, 0x2a, 0x04);
+
+ ov_write(c, 0x11, win->clockdiv);
+
+ ov_write(c, 0x2a, 0x84);
+ /* This next setting is critical. It seems to improve
+ * the gain or the contrast. The "reserved" bits seem
+ * to have some effect in this case. */
+ ov_write(c, 0x2d, 0x85); /* FIXME: This messes up banding filter */
+
+ return 0;
+}
+
+static int ov6x20_set_window(struct i2c_client *c, struct ovcamchip_window *win)
+{
+ int ret, hwscale, vwscale;
+
+ ret = ov6x20_mode_init(c, win);
+ if (ret < 0)
+ return ret;
+
+ if (win->quarter) {
+ hwscale = 0;
+ vwscale = 0;
+ } else {
+ hwscale = 1;
+ vwscale = 1; /* The datasheet says 0; it's wrong */
+ }
+
+ ov_write(c, 0x17, HWSBASE + (win->x >> hwscale));
+ ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale));
+ ov_write(c, 0x19, VWSBASE + (win->y >> vwscale));
+ ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale));
+
+ return 0;
+}
+
+static int ov6x20_command(struct i2c_client *c, unsigned int cmd, void *arg)
+{
+ switch (cmd) {
+ case OVCAMCHIP_CMD_S_CTRL:
+ return ov6x20_set_control(c, arg);
+ case OVCAMCHIP_CMD_G_CTRL:
+ return ov6x20_get_control(c, arg);
+ case OVCAMCHIP_CMD_S_MODE:
+ return ov6x20_set_window(c, arg);
+ default:
+ DDEBUG(2, &c->dev, "command not supported: %d", cmd);
+ return -ENOIOCTLCMD;
+ }
+}
+
+struct ovcamchip_ops ov6x20_ops = {
+ .init = ov6x20_init,
+ .free = ov6x20_free,
+ .command = ov6x20_command,
+};
diff --git a/drivers/media/video/ovcamchip/ov6x30.c b/drivers/media/video/ovcamchip/ov6x30.c
new file mode 100644
index 00000000000..44a842379b4
--- /dev/null
+++ b/drivers/media/video/ovcamchip/ov6x30.c
@@ -0,0 +1,374 @@
+/* OmniVision OV6630/OV6130 Camera Chip Support Code
+ *
+ * Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org>
+ * http://alpha.dyndns.org/ov511/
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
+ */
+
+#define DEBUG
+
+#include <linux/slab.h>
+#include "ovcamchip_priv.h"
+
+/* Registers */
+#define REG_GAIN 0x00 /* gain [5:0] */
+#define REG_BLUE 0x01 /* blue gain */
+#define REG_RED 0x02 /* red gain */
+#define REG_SAT 0x03 /* saturation [7:3] */
+#define REG_CNT 0x05 /* Y contrast [3:0] */
+#define REG_BRT 0x06 /* Y brightness */
+#define REG_SHARP 0x07 /* sharpness */
+#define REG_WB_BLUE 0x0C /* WB blue ratio [5:0] */
+#define REG_WB_RED 0x0D /* WB red ratio [5:0] */
+#define REG_EXP 0x10 /* exposure */
+
+/* Window parameters */
+#define HWSBASE 0x38
+#define HWEBASE 0x3A
+#define VWSBASE 0x05
+#define VWEBASE 0x06
+
+struct ov6x30 {
+ int auto_brt;
+ int auto_exp;
+ int backlight;
+ int bandfilt;
+ int mirror;
+};
+
+static struct ovcamchip_regvals regvals_init_6x30[] = {
+ { 0x12, 0x80 }, /* reset */
+ { 0x00, 0x1f }, /* Gain */
+ { 0x01, 0x99 }, /* Blue gain */
+ { 0x02, 0x7c }, /* Red gain */
+ { 0x03, 0xc0 }, /* Saturation */
+ { 0x05, 0x0a }, /* Contrast */
+ { 0x06, 0x95 }, /* Brightness */
+ { 0x07, 0x2d }, /* Sharpness */
+ { 0x0c, 0x20 },
+ { 0x0d, 0x20 },
+ { 0x0e, 0x20 },
+ { 0x0f, 0x05 },
+ { 0x10, 0x9a }, /* "exposure check" */
+ { 0x11, 0x00 }, /* Pixel clock = fastest */
+ { 0x12, 0x24 }, /* Enable AGC and AWB */
+ { 0x13, 0x21 },
+ { 0x14, 0x80 },
+ { 0x15, 0x01 },
+ { 0x16, 0x03 },
+ { 0x17, 0x38 },
+ { 0x18, 0xea },
+ { 0x19, 0x04 },
+ { 0x1a, 0x93 },
+ { 0x1b, 0x00 },
+ { 0x1e, 0xc4 },
+ { 0x1f, 0x04 },
+ { 0x20, 0x20 },
+ { 0x21, 0x10 },
+ { 0x22, 0x88 },
+ { 0x23, 0xc0 }, /* Crystal circuit power level */
+ { 0x25, 0x9a }, /* Increase AEC black pixel ratio */
+ { 0x26, 0xb2 }, /* BLC enable */
+ { 0x27, 0xa2 },
+ { 0x28, 0x00 },
+ { 0x29, 0x00 },
+ { 0x2a, 0x84 }, /* (keep) */
+ { 0x2b, 0xa8 }, /* (keep) */
+ { 0x2c, 0xa0 },
+ { 0x2d, 0x95 }, /* Enable auto-brightness */
+ { 0x2e, 0x88 },
+ { 0x33, 0x26 },
+ { 0x34, 0x03 },
+ { 0x36, 0x8f },
+ { 0x37, 0x80 },
+ { 0x38, 0x83 },
+ { 0x39, 0x80 },
+ { 0x3a, 0x0f },
+ { 0x3b, 0x3c },
+ { 0x3c, 0x1a },
+ { 0x3d, 0x80 },
+ { 0x3e, 0x80 },
+ { 0x3f, 0x0e },
+ { 0x40, 0x00 }, /* White bal */
+ { 0x41, 0x00 }, /* White bal */
+ { 0x42, 0x80 },
+ { 0x43, 0x3f }, /* White bal */
+ { 0x44, 0x80 },
+ { 0x45, 0x20 },
+ { 0x46, 0x20 },
+ { 0x47, 0x80 },
+ { 0x48, 0x7f },
+ { 0x49, 0x00 },
+ { 0x4a, 0x00 },
+ { 0x4b, 0x80 },
+ { 0x4c, 0xd0 },
+ { 0x4d, 0x10 }, /* U = 0.563u, V = 0.714v */
+ { 0x4e, 0x40 },
+ { 0x4f, 0x07 }, /* UV average mode, color killer: strongest */
+ { 0x50, 0xff },
+ { 0x54, 0x23 }, /* Max AGC gain: 18dB */
+ { 0x55, 0xff },
+ { 0x56, 0x12 },
+ { 0x57, 0x81 }, /* (default) */
+ { 0x58, 0x75 },
+ { 0x59, 0x01 }, /* AGC dark current compensation: +1 */
+ { 0x5a, 0x2c },
+ { 0x5b, 0x0f }, /* AWB chrominance levels */
+ { 0x5c, 0x10 },
+ { 0x3d, 0x80 },
+ { 0x27, 0xa6 },
+ /* Toggle AWB off and on */
+ { 0x12, 0x20 },
+ { 0x12, 0x24 },
+
+ { 0xff, 0xff }, /* END MARKER */
+};
+
+/* This initializes the OV6x30 camera chip and relevant variables. */
+static int ov6x30_init(struct i2c_client *c)
+{
+ struct ovcamchip *ov = i2c_get_clientdata(c);
+ struct ov6x30 *s;
+ int rc;
+
+ DDEBUG(4, &c->dev, "entered");
+
+ rc = ov_write_regvals(c, regvals_init_6x30);
+ if (rc < 0)
+ return rc;
+
+ ov->spriv = s = kmalloc(sizeof *s, GFP_KERNEL);
+ if (!s)
+ return -ENOMEM;
+ memset(s, 0, sizeof *s);
+
+ s->auto_brt = 1;
+ s->auto_exp = 1;
+
+ return rc;
+}
+
+static int ov6x30_free(struct i2c_client *c)
+{
+ struct ovcamchip *ov = i2c_get_clientdata(c);
+
+ kfree(ov->spriv);
+ return 0;
+}
+
+static int ov6x30_set_control(struct i2c_client *c,
+ struct ovcamchip_control *ctl)
+{
+ struct ovcamchip *ov = i2c_get_clientdata(c);
+ struct ov6x30 *s = ov->spriv;
+ int rc;
+ int v = ctl->value;
+
+ switch (ctl->id) {
+ case OVCAMCHIP_CID_CONT:
+ rc = ov_write_mask(c, REG_CNT, v >> 12, 0x0f);
+ break;
+ case OVCAMCHIP_CID_BRIGHT:
+ rc = ov_write(c, REG_BRT, v >> 8);
+ break;
+ case OVCAMCHIP_CID_SAT:
+ rc = ov_write(c, REG_SAT, v >> 8);
+ break;
+ case OVCAMCHIP_CID_HUE:
+ rc = ov_write(c, REG_RED, 0xFF - (v >> 8));
+ if (rc < 0)
+ goto out;
+
+ rc = ov_write(c, REG_BLUE, v >> 8);
+ break;
+ case OVCAMCHIP_CID_EXP:
+ rc = ov_write(c, REG_EXP, v);
+ break;
+ case OVCAMCHIP_CID_FREQ:
+ {
+ int sixty = (v == 60);
+
+ rc = ov_write(c, 0x2b, sixty?0xa8:0x28);
+ if (rc < 0)
+ goto out;
+
+ rc = ov_write(c, 0x2a, sixty?0x84:0xa4);
+ break;
+ }
+ case OVCAMCHIP_CID_BANDFILT:
+ rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04);
+ s->bandfilt = v;
+ break;
+ case OVCAMCHIP_CID_AUTOBRIGHT:
+ rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10);
+ s->auto_brt = v;
+ break;
+ case OVCAMCHIP_CID_AUTOEXP:
+ rc = ov_write_mask(c, 0x28, v?0x00:0x10, 0x10);
+ s->auto_exp = v;
+ break;
+ case OVCAMCHIP_CID_BACKLIGHT:
+ {
+ rc = ov_write_mask(c, 0x4e, v?0x80:0x60, 0xe0);
+ if (rc < 0)
+ goto out;
+
+ rc = ov_write_mask(c, 0x29, v?0x08:0x00, 0x08);
+ if (rc < 0)
+ goto out;
+
+ rc = ov_write_mask(c, 0x28, v?0x02:0x00, 0x02);
+ s->backlight = v;
+ break;
+ }
+ case OVCAMCHIP_CID_MIRROR:
+ rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40);
+ s->mirror = v;
+ break;
+ default:
+ DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
+ return -EPERM;
+ }
+
+out:
+ DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc);
+ return rc;
+}
+
+static int ov6x30_get_control(struct i2c_client *c,
+ struct ovcamchip_control *ctl)
+{
+ struct ovcamchip *ov = i2c_get_clientdata(c);
+ struct ov6x30 *s = ov->spriv;
+ int rc = 0;
+ unsigned char val = 0;
+
+ switch (ctl->id) {
+ case OVCAMCHIP_CID_CONT:
+ rc = ov_read(c, REG_CNT, &val);
+ ctl->value = (val & 0x0f) << 12;
+ break;
+ case OVCAMCHIP_CID_BRIGHT:
+ rc = ov_read(c, REG_BRT, &val);
+ ctl->value = val << 8;
+ break;
+ case OVCAMCHIP_CID_SAT:
+ rc = ov_read(c, REG_SAT, &val);
+ ctl->value = val << 8;
+ break;
+ case OVCAMCHIP_CID_HUE:
+ rc = ov_read(c, REG_BLUE, &val);
+ ctl->value = val << 8;
+ break;
+ case OVCAMCHIP_CID_EXP:
+ rc = ov_read(c, REG_EXP, &val);
+ ctl->value = val;
+ break;
+ case OVCAMCHIP_CID_BANDFILT:
+ ctl->value = s->bandfilt;
+ break;
+ case OVCAMCHIP_CID_AUTOBRIGHT:
+ ctl->value = s->auto_brt;
+ break;
+ case OVCAMCHIP_CID_AUTOEXP:
+ ctl->value = s->auto_exp;
+ break;
+ case OVCAMCHIP_CID_BACKLIGHT:
+ ctl->value = s->backlight;
+ break;
+ case OVCAMCHIP_CID_MIRROR:
+ ctl->value = s->mirror;
+ break;
+ default:
+ DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
+ return -EPERM;
+ }
+
+ DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc);
+ return rc;
+}
+
+static int ov6x30_mode_init(struct i2c_client *c, struct ovcamchip_window *win)
+{
+ /******** QCIF-specific regs ********/
+
+ ov_write_mask(c, 0x14, win->quarter?0x20:0x00, 0x20);
+
+ /******** Palette-specific regs ********/
+
+ if (win->format == VIDEO_PALETTE_GREY) {
+ if (c->adapter->id == (I2C_ALGO_SMBUS | I2C_HW_SMBUS_OV518)) {
+ /* Do nothing - we're already in 8-bit mode */
+ } else {
+ ov_write_mask(c, 0x13, 0x20, 0x20);
+ }
+ } else {
+ /* The OV518 needs special treatment. Although both the OV518
+ * and the OV6630 support a 16-bit video bus, only the 8 bit Y
+ * bus is actually used. The UV bus is tied to ground.
+ * Therefore, the OV6630 needs to be in 8-bit multiplexed
+ * output mode */
+
+ if (c->adapter->id == (I2C_ALGO_SMBUS | I2C_HW_SMBUS_OV518)) {
+ /* Do nothing - we want to stay in 8-bit mode */
+ /* Warning: Messing with reg 0x13 breaks OV518 color */
+ } else {
+ ov_write_mask(c, 0x13, 0x00, 0x20);
+ }
+ }
+
+ /******** Clock programming ********/
+
+ ov_write(c, 0x11, win->clockdiv);
+
+ return 0;
+}
+
+static int ov6x30_set_window(struct i2c_client *c, struct ovcamchip_window *win)
+{
+ int ret, hwscale, vwscale;
+
+ ret = ov6x30_mode_init(c, win);
+ if (ret < 0)
+ return ret;
+
+ if (win->quarter) {
+ hwscale = 0;
+ vwscale = 0;
+ } else {
+ hwscale = 1;
+ vwscale = 1; /* The datasheet says 0; it's wrong */
+ }
+
+ ov_write(c, 0x17, HWSBASE + (win->x >> hwscale));
+ ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale));
+ ov_write(c, 0x19, VWSBASE + (win->y >> vwscale));
+ ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale));
+
+ return 0;
+}
+
+static int ov6x30_command(struct i2c_client *c, unsigned int cmd, void *arg)
+{
+ switch (cmd) {
+ case OVCAMCHIP_CMD_S_CTRL:
+ return ov6x30_set_control(c, arg);
+ case OVCAMCHIP_CMD_G_CTRL:
+ return ov6x30_get_control(c, arg);
+ case OVCAMCHIP_CMD_S_MODE:
+ return ov6x30_set_window(c, arg);
+ default:
+ DDEBUG(2, &c->dev, "command not supported: %d", cmd);
+ return -ENOIOCTLCMD;
+ }
+}
+
+struct ovcamchip_ops ov6x30_ops = {
+ .init = ov6x30_init,
+ .free = ov6x30_free,
+ .command = ov6x30_command,
+};
diff --git a/drivers/media/video/ovcamchip/ov76be.c b/drivers/media/video/ovcamchip/ov76be.c
new file mode 100644
index 00000000000..29bbdc05e3b
--- /dev/null
+++ b/drivers/media/video/ovcamchip/ov76be.c
@@ -0,0 +1,303 @@
+/* OmniVision OV76BE Camera Chip Support Code
+ *
+ * Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org>
+ * http://alpha.dyndns.org/ov511/
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
+ */
+
+#define DEBUG
+
+#include <linux/slab.h>
+#include "ovcamchip_priv.h"
+
+/* OV7610 registers: Since the OV76BE is undocumented, we'll settle for these
+ * for now. */
+#define REG_GAIN 0x00 /* gain [5:0] */
+#define REG_BLUE 0x01 /* blue channel balance */
+#define REG_RED 0x02 /* red channel balance */
+#define REG_SAT 0x03 /* saturation */
+#define REG_CNT 0x05 /* Y contrast */
+#define REG_BRT 0x06 /* Y brightness */
+#define REG_BLUE_BIAS 0x0C /* blue channel bias [5:0] */
+#define REG_RED_BIAS 0x0D /* red channel bias [5:0] */
+#define REG_GAMMA_COEFF 0x0E /* gamma settings */
+#define REG_WB_RANGE 0x0F /* AEC/ALC/S-AWB settings */
+#define REG_EXP 0x10 /* manual exposure setting */
+#define REG_CLOCK 0x11 /* polarity/clock prescaler */
+#define REG_FIELD_DIVIDE 0x16 /* field interval/mode settings */
+#define REG_HWIN_START 0x17 /* horizontal window start */
+#define REG_HWIN_END 0x18 /* horizontal window end */
+#define REG_VWIN_START 0x19 /* vertical window start */
+#define REG_VWIN_END 0x1A /* vertical window end */
+#define REG_PIXEL_SHIFT 0x1B /* pixel shift */
+#define REG_YOFFSET 0x21 /* Y channel offset */
+#define REG_UOFFSET 0x22 /* U channel offset */
+#define REG_ECW 0x24 /* exposure white level for AEC */
+#define REG_ECB 0x25 /* exposure black level for AEC */
+#define REG_FRAMERATE_H 0x2A /* frame rate MSB + misc */
+#define REG_FRAMERATE_L 0x2B /* frame rate LSB */
+#define REG_ALC 0x2C /* Auto Level Control settings */
+#define REG_VOFFSET 0x2E /* V channel offset adjustment */
+#define REG_ARRAY_BIAS 0x2F /* array bias -- don't change */
+#define REG_YGAMMA 0x33 /* misc gamma settings [7:6] */
+#define REG_BIAS_ADJUST 0x34 /* misc bias settings */
+
+/* Window parameters */
+#define HWSBASE 0x38
+#define HWEBASE 0x3a
+#define VWSBASE 0x05
+#define VWEBASE 0x05
+
+struct ov76be {
+ int auto_brt;
+ int auto_exp;
+ int bandfilt;
+ int mirror;
+};
+
+/* NOTE: These are the same as the 7x10 settings, but should eventually be
+ * optimized for the OV76BE */
+static struct ovcamchip_regvals regvals_init_76be[] = {
+ { 0x10, 0xff },
+ { 0x16, 0x03 },
+ { 0x28, 0x24 },
+ { 0x2b, 0xac },
+ { 0x12, 0x00 },
+ { 0x38, 0x81 },
+ { 0x28, 0x24 }, /* 0c */
+ { 0x0f, 0x85 }, /* lg's setting */
+ { 0x15, 0x01 },
+ { 0x20, 0x1c },
+ { 0x23, 0x2a },
+ { 0x24, 0x10 },
+ { 0x25, 0x8a },
+ { 0x26, 0xa2 },
+ { 0x27, 0xc2 },
+ { 0x2a, 0x04 },
+ { 0x2c, 0xfe },
+ { 0x2d, 0x93 },
+ { 0x30, 0x71 },
+ { 0x31, 0x60 },
+ { 0x32, 0x26 },
+ { 0x33, 0x20 },
+ { 0x34, 0x48 },
+ { 0x12, 0x24 },
+ { 0x11, 0x01 },
+ { 0x0c, 0x24 },
+ { 0x0d, 0x24 },
+ { 0xff, 0xff }, /* END MARKER */
+};
+
+/* This initializes the OV76be camera chip and relevant variables. */
+static int ov76be_init(struct i2c_client *c)
+{
+ struct ovcamchip *ov = i2c_get_clientdata(c);
+ struct ov76be *s;
+ int rc;
+
+ DDEBUG(4, &c->dev, "entered");
+
+ rc = ov_write_regvals(c, regvals_init_76be);
+ if (rc < 0)
+ return rc;
+
+ ov->spriv = s = kmalloc(sizeof *s, GFP_KERNEL);
+ if (!s)
+ return -ENOMEM;
+ memset(s, 0, sizeof *s);
+
+ s->auto_brt = 1;
+ s->auto_exp = 1;
+
+ return rc;
+}
+
+static int ov76be_free(struct i2c_client *c)
+{
+ struct ovcamchip *ov = i2c_get_clientdata(c);
+
+ kfree(ov->spriv);
+ return 0;
+}
+
+static int ov76be_set_control(struct i2c_client *c,
+ struct ovcamchip_control *ctl)
+{
+ struct ovcamchip *ov = i2c_get_clientdata(c);
+ struct ov76be *s = ov->spriv;
+ int rc;
+ int v = ctl->value;
+
+ switch (ctl->id) {
+ case OVCAMCHIP_CID_BRIGHT:
+ rc = ov_write(c, REG_BRT, v >> 8);
+ break;
+ case OVCAMCHIP_CID_SAT:
+ rc = ov_write(c, REG_SAT, v >> 8);
+ break;
+ case OVCAMCHIP_CID_EXP:
+ rc = ov_write(c, REG_EXP, v);
+ break;
+ case OVCAMCHIP_CID_FREQ:
+ {
+ int sixty = (v == 60);
+
+ rc = ov_write_mask(c, 0x2a, sixty?0x00:0x80, 0x80);
+ if (rc < 0)
+ goto out;
+
+ rc = ov_write(c, 0x2b, sixty?0x00:0xac);
+ if (rc < 0)
+ goto out;
+
+ rc = ov_write_mask(c, 0x76, 0x01, 0x01);
+ break;
+ }
+ case OVCAMCHIP_CID_BANDFILT:
+ rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04);
+ s->bandfilt = v;
+ break;
+ case OVCAMCHIP_CID_AUTOBRIGHT:
+ rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10);
+ s->auto_brt = v;
+ break;
+ case OVCAMCHIP_CID_AUTOEXP:
+ rc = ov_write_mask(c, 0x13, v?0x01:0x00, 0x01);
+ s->auto_exp = v;
+ break;
+ case OVCAMCHIP_CID_MIRROR:
+ rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40);
+ s->mirror = v;
+ break;
+ default:
+ DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
+ return -EPERM;
+ }
+
+out:
+ DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc);
+ return rc;
+}
+
+static int ov76be_get_control(struct i2c_client *c,
+ struct ovcamchip_control *ctl)
+{
+ struct ovcamchip *ov = i2c_get_clientdata(c);
+ struct ov76be *s = ov->spriv;
+ int rc = 0;
+ unsigned char val = 0;
+
+ switch (ctl->id) {
+ case OVCAMCHIP_CID_BRIGHT:
+ rc = ov_read(c, REG_BRT, &val);
+ ctl->value = val << 8;
+ break;
+ case OVCAMCHIP_CID_SAT:
+ rc = ov_read(c, REG_SAT, &val);
+ ctl->value = val << 8;
+ break;
+ case OVCAMCHIP_CID_EXP:
+ rc = ov_read(c, REG_EXP, &val);
+ ctl->value = val;
+ break;
+ case OVCAMCHIP_CID_BANDFILT:
+ ctl->value = s->bandfilt;
+ break;
+ case OVCAMCHIP_CID_AUTOBRIGHT:
+ ctl->value = s->auto_brt;
+ break;
+ case OVCAMCHIP_CID_AUTOEXP:
+ ctl->value = s->auto_exp;
+ break;
+ case OVCAMCHIP_CID_MIRROR:
+ ctl->value = s->mirror;
+ break;
+ default:
+ DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
+ return -EPERM;
+ }
+
+ DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc);
+ return rc;
+}
+
+static int ov76be_mode_init(struct i2c_client *c, struct ovcamchip_window *win)
+{
+ int qvga = win->quarter;
+
+ /******** QVGA-specific regs ********/
+
+ ov_write(c, 0x14, qvga?0xa4:0x84);
+
+ /******** Palette-specific regs ********/
+
+ if (win->format == VIDEO_PALETTE_GREY) {
+ ov_write_mask(c, 0x0e, 0x40, 0x40);
+ ov_write_mask(c, 0x13, 0x20, 0x20);
+ } else {
+ ov_write_mask(c, 0x0e, 0x00, 0x40);
+ ov_write_mask(c, 0x13, 0x00, 0x20);
+ }
+
+ /******** Clock programming ********/
+
+ ov_write(c, 0x11, win->clockdiv);
+
+ /******** Resolution-specific ********/
+
+ if (win->width == 640 && win->height == 480)
+ ov_write(c, 0x35, 0x9e);
+ else
+ ov_write(c, 0x35, 0x1e);
+
+ return 0;
+}
+
+static int ov76be_set_window(struct i2c_client *c, struct ovcamchip_window *win)
+{
+ int ret, hwscale, vwscale;
+
+ ret = ov76be_mode_init(c, win);
+ if (ret < 0)
+ return ret;
+
+ if (win->quarter) {
+ hwscale = 1;
+ vwscale = 0;
+ } else {
+ hwscale = 2;
+ vwscale = 1;
+ }
+
+ ov_write(c, 0x17, HWSBASE + (win->x >> hwscale));
+ ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale));
+ ov_write(c, 0x19, VWSBASE + (win->y >> vwscale));
+ ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale));
+
+ return 0;
+}
+
+static int ov76be_command(struct i2c_client *c, unsigned int cmd, void *arg)
+{
+ switch (cmd) {
+ case OVCAMCHIP_CMD_S_CTRL:
+ return ov76be_set_control(c, arg);
+ case OVCAMCHIP_CMD_G_CTRL:
+ return ov76be_get_control(c, arg);
+ case OVCAMCHIP_CMD_S_MODE:
+ return ov76be_set_window(c, arg);
+ default:
+ DDEBUG(2, &c->dev, "command not supported: %d", cmd);
+ return -ENOIOCTLCMD;
+ }
+}
+
+struct ovcamchip_ops ov76be_ops = {
+ .init = ov76be_init,
+ .free = ov76be_free,
+ .command = ov76be_command,
+};
diff --git a/drivers/media/video/ovcamchip/ov7x10.c b/drivers/media/video/ovcamchip/ov7x10.c
new file mode 100644
index 00000000000..6c383d4b14f
--- /dev/null
+++ b/drivers/media/video/ovcamchip/ov7x10.c
@@ -0,0 +1,335 @@
+/* OmniVision OV7610/OV7110 Camera Chip Support Code
+ *
+ * Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org>
+ * http://alpha.dyndns.org/ov511/
+ *
+ * Color fixes by by Orion Sky Lawlor <olawlor@acm.org> (2/26/2000)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
+ */
+
+#define DEBUG
+
+#include <linux/slab.h>
+#include "ovcamchip_priv.h"
+
+/* Registers */
+#define REG_GAIN 0x00 /* gain [5:0] */
+#define REG_BLUE 0x01 /* blue channel balance */
+#define REG_RED 0x02 /* red channel balance */
+#define REG_SAT 0x03 /* saturation */
+#define REG_CNT 0x05 /* Y contrast */
+#define REG_BRT 0x06 /* Y brightness */
+#define REG_BLUE_BIAS 0x0C /* blue channel bias [5:0] */
+#define REG_RED_BIAS 0x0D /* red channel bias [5:0] */
+#define REG_GAMMA_COEFF 0x0E /* gamma settings */
+#define REG_WB_RANGE 0x0F /* AEC/ALC/S-AWB settings */
+#define REG_EXP 0x10 /* manual exposure setting */
+#define REG_CLOCK 0x11 /* polarity/clock prescaler */
+#define REG_FIELD_DIVIDE 0x16 /* field interval/mode settings */
+#define REG_HWIN_START 0x17 /* horizontal window start */
+#define REG_HWIN_END 0x18 /* horizontal window end */
+#define REG_VWIN_START 0x19 /* vertical window start */
+#define REG_VWIN_END 0x1A /* vertical window end */
+#define REG_PIXEL_SHIFT 0x1B /* pixel shift */
+#define REG_YOFFSET 0x21 /* Y channel offset */
+#define REG_UOFFSET 0x22 /* U channel offset */
+#define REG_ECW 0x24 /* exposure white level for AEC */
+#define REG_ECB 0x25 /* exposure black level for AEC */
+#define REG_FRAMERATE_H 0x2A /* frame rate MSB + misc */
+#define REG_FRAMERATE_L 0x2B /* frame rate LSB */
+#define REG_ALC 0x2C /* Auto Level Control settings */
+#define REG_VOFFSET 0x2E /* V channel offset adjustment */
+#define REG_ARRAY_BIAS 0x2F /* array bias -- don't change */
+#define REG_YGAMMA 0x33 /* misc gamma settings [7:6] */
+#define REG_BIAS_ADJUST 0x34 /* misc bias settings */
+
+/* Window parameters */
+#define HWSBASE 0x38
+#define HWEBASE 0x3a
+#define VWSBASE 0x05
+#define VWEBASE 0x05
+
+struct ov7x10 {
+ int auto_brt;
+ int auto_exp;
+ int bandfilt;
+ int mirror;
+};
+
+/* Lawrence Glaister <lg@jfm.bc.ca> reports:
+ *
+ * Register 0x0f in the 7610 has the following effects:
+ *
+ * 0x85 (AEC method 1): Best overall, good contrast range
+ * 0x45 (AEC method 2): Very overexposed
+ * 0xa5 (spec sheet default): Ok, but the black level is
+ * shifted resulting in loss of contrast
+ * 0x05 (old driver setting): very overexposed, too much
+ * contrast
+ */
+static struct ovcamchip_regvals regvals_init_7x10[] = {
+ { 0x10, 0xff },
+ { 0x16, 0x03 },
+ { 0x28, 0x24 },
+ { 0x2b, 0xac },
+ { 0x12, 0x00 },
+ { 0x38, 0x81 },
+ { 0x28, 0x24 }, /* 0c */
+ { 0x0f, 0x85 }, /* lg's setting */
+ { 0x15, 0x01 },
+ { 0x20, 0x1c },
+ { 0x23, 0x2a },
+ { 0x24, 0x10 },
+ { 0x25, 0x8a },
+ { 0x26, 0xa2 },
+ { 0x27, 0xc2 },
+ { 0x2a, 0x04 },
+ { 0x2c, 0xfe },
+ { 0x2d, 0x93 },
+ { 0x30, 0x71 },
+ { 0x31, 0x60 },
+ { 0x32, 0x26 },
+ { 0x33, 0x20 },
+ { 0x34, 0x48 },
+ { 0x12, 0x24 },
+ { 0x11, 0x01 },
+ { 0x0c, 0x24 },
+ { 0x0d, 0x24 },
+ { 0xff, 0xff }, /* END MARKER */
+};
+
+/* This initializes the OV7x10 camera chip and relevant variables. */
+static int ov7x10_init(struct i2c_client *c)
+{
+ struct ovcamchip *ov = i2c_get_clientdata(c);
+ struct ov7x10 *s;
+ int rc;
+
+ DDEBUG(4, &c->dev, "entered");
+
+ rc = ov_write_regvals(c, regvals_init_7x10);
+ if (rc < 0)
+ return rc;
+
+ ov->spriv = s = kmalloc(sizeof *s, GFP_KERNEL);
+ if (!s)
+ return -ENOMEM;
+ memset(s, 0, sizeof *s);
+
+ s->auto_brt = 1;
+ s->auto_exp = 1;
+
+ return rc;
+}
+
+static int ov7x10_free(struct i2c_client *c)
+{
+ struct ovcamchip *ov = i2c_get_clientdata(c);
+
+ kfree(ov->spriv);
+ return 0;
+}
+
+static int ov7x10_set_control(struct i2c_client *c,
+ struct ovcamchip_control *ctl)
+{
+ struct ovcamchip *ov = i2c_get_clientdata(c);
+ struct ov7x10 *s = ov->spriv;
+ int rc;
+ int v = ctl->value;
+
+ switch (ctl->id) {
+ case OVCAMCHIP_CID_CONT:
+ rc = ov_write(c, REG_CNT, v >> 8);
+ break;
+ case OVCAMCHIP_CID_BRIGHT:
+ rc = ov_write(c, REG_BRT, v >> 8);
+ break;
+ case OVCAMCHIP_CID_SAT:
+ rc = ov_write(c, REG_SAT, v >> 8);
+ break;
+ case OVCAMCHIP_CID_HUE:
+ rc = ov_write(c, REG_RED, 0xFF - (v >> 8));
+ if (rc < 0)
+ goto out;
+
+ rc = ov_write(c, REG_BLUE, v >> 8);
+ break;
+ case OVCAMCHIP_CID_EXP:
+ rc = ov_write(c, REG_EXP, v);
+ break;
+ case OVCAMCHIP_CID_FREQ:
+ {
+ int sixty = (v == 60);
+
+ rc = ov_write_mask(c, 0x2a, sixty?0x00:0x80, 0x80);
+ if (rc < 0)
+ goto out;
+
+ rc = ov_write(c, 0x2b, sixty?0x00:0xac);
+ if (rc < 0)
+ goto out;
+
+ rc = ov_write_mask(c, 0x13, 0x10, 0x10);
+ if (rc < 0)
+ goto out;
+
+ rc = ov_write_mask(c, 0x13, 0x00, 0x10);
+ break;
+ }
+ case OVCAMCHIP_CID_BANDFILT:
+ rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04);
+ s->bandfilt = v;
+ break;
+ case OVCAMCHIP_CID_AUTOBRIGHT:
+ rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10);
+ s->auto_brt = v;
+ break;
+ case OVCAMCHIP_CID_AUTOEXP:
+ rc = ov_write_mask(c, 0x29, v?0x00:0x80, 0x80);
+ s->auto_exp = v;
+ break;
+ case OVCAMCHIP_CID_MIRROR:
+ rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40);
+ s->mirror = v;
+ break;
+ default:
+ DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
+ return -EPERM;
+ }
+
+out:
+ DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc);
+ return rc;
+}
+
+static int ov7x10_get_control(struct i2c_client *c,
+ struct ovcamchip_control *ctl)
+{
+ struct ovcamchip *ov = i2c_get_clientdata(c);
+ struct ov7x10 *s = ov->spriv;
+ int rc = 0;
+ unsigned char val = 0;
+
+ switch (ctl->id) {
+ case OVCAMCHIP_CID_CONT:
+ rc = ov_read(c, REG_CNT, &val);
+ ctl->value = val << 8;
+ break;
+ case OVCAMCHIP_CID_BRIGHT:
+ rc = ov_read(c, REG_BRT, &val);
+ ctl->value = val << 8;
+ break;
+ case OVCAMCHIP_CID_SAT:
+ rc = ov_read(c, REG_SAT, &val);
+ ctl->value = val << 8;
+ break;
+ case OVCAMCHIP_CID_HUE:
+ rc = ov_read(c, REG_BLUE, &val);
+ ctl->value = val << 8;
+ break;
+ case OVCAMCHIP_CID_EXP:
+ rc = ov_read(c, REG_EXP, &val);
+ ctl->value = val;
+ break;
+ case OVCAMCHIP_CID_BANDFILT:
+ ctl->value = s->bandfilt;
+ break;
+ case OVCAMCHIP_CID_AUTOBRIGHT:
+ ctl->value = s->auto_brt;
+ break;
+ case OVCAMCHIP_CID_AUTOEXP:
+ ctl->value = s->auto_exp;
+ break;
+ case OVCAMCHIP_CID_MIRROR:
+ ctl->value = s->mirror;
+ break;
+ default:
+ DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
+ return -EPERM;
+ }
+
+ DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc);
+ return rc;
+}
+
+static int ov7x10_mode_init(struct i2c_client *c, struct ovcamchip_window *win)
+{
+ int qvga = win->quarter;
+
+ /******** QVGA-specific regs ********/
+
+ ov_write(c, 0x14, qvga?0x24:0x04);
+
+ /******** Palette-specific regs ********/
+
+ if (win->format == VIDEO_PALETTE_GREY) {
+ ov_write_mask(c, 0x0e, 0x40, 0x40);
+ ov_write_mask(c, 0x13, 0x20, 0x20);
+ } else {
+ ov_write_mask(c, 0x0e, 0x00, 0x40);
+ ov_write_mask(c, 0x13, 0x00, 0x20);
+ }
+
+ /******** Clock programming ********/
+
+ ov_write(c, 0x11, win->clockdiv);
+
+ /******** Resolution-specific ********/
+
+ if (win->width == 640 && win->height == 480)
+ ov_write(c, 0x35, 0x9e);
+ else
+ ov_write(c, 0x35, 0x1e);
+
+ return 0;
+}
+
+static int ov7x10_set_window(struct i2c_client *c, struct ovcamchip_window *win)
+{
+ int ret, hwscale, vwscale;
+
+ ret = ov7x10_mode_init(c, win);
+ if (ret < 0)
+ return ret;
+
+ if (win->quarter) {
+ hwscale = 1;
+ vwscale = 0;
+ } else {
+ hwscale = 2;
+ vwscale = 1;
+ }
+
+ ov_write(c, 0x17, HWSBASE + (win->x >> hwscale));
+ ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale));
+ ov_write(c, 0x19, VWSBASE + (win->y >> vwscale));
+ ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale));
+
+ return 0;
+}
+
+static int ov7x10_command(struct i2c_client *c, unsigned int cmd, void *arg)
+{
+ switch (cmd) {
+ case OVCAMCHIP_CMD_S_CTRL:
+ return ov7x10_set_control(c, arg);
+ case OVCAMCHIP_CMD_G_CTRL:
+ return ov7x10_get_control(c, arg);
+ case OVCAMCHIP_CMD_S_MODE:
+ return ov7x10_set_window(c, arg);
+ default:
+ DDEBUG(2, &c->dev, "command not supported: %d", cmd);
+ return -ENOIOCTLCMD;
+ }
+}
+
+struct ovcamchip_ops ov7x10_ops = {
+ .init = ov7x10_init,
+ .free = ov7x10_free,
+ .command = ov7x10_command,
+};
diff --git a/drivers/media/video/ovcamchip/ov7x20.c b/drivers/media/video/ovcamchip/ov7x20.c
new file mode 100644
index 00000000000..3c8c48f338b
--- /dev/null
+++ b/drivers/media/video/ovcamchip/ov7x20.c
@@ -0,0 +1,455 @@
+/* OmniVision OV7620/OV7120 Camera Chip Support Code
+ *
+ * Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org>
+ * http://alpha.dyndns.org/ov511/
+ *
+ * OV7620 fixes by Charl P. Botha <cpbotha@ieee.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
+ */
+
+#define DEBUG
+
+#include <linux/slab.h>
+#include "ovcamchip_priv.h"
+
+/* Registers */
+#define REG_GAIN 0x00 /* gain [5:0] */
+#define REG_BLUE 0x01 /* blue gain */
+#define REG_RED 0x02 /* red gain */
+#define REG_SAT 0x03 /* saturation */
+#define REG_BRT 0x06 /* Y brightness */
+#define REG_SHARP 0x07 /* analog sharpness */
+#define REG_BLUE_BIAS 0x0C /* WB blue ratio [5:0] */
+#define REG_RED_BIAS 0x0D /* WB red ratio [5:0] */
+#define REG_EXP 0x10 /* exposure */
+
+/* Default control settings. Values are in terms of V4L2 controls. */
+#define OV7120_DFL_BRIGHT 0x60
+#define OV7620_DFL_BRIGHT 0x60
+#define OV7120_DFL_SAT 0xb0
+#define OV7620_DFL_SAT 0xc0
+#define DFL_AUTO_EXP 1
+#define DFL_AUTO_GAIN 1
+#define OV7120_DFL_GAIN 0x00
+#define OV7620_DFL_GAIN 0x00
+/* NOTE: Since autoexposure is the default, these aren't programmed into the
+ * OV7x20 chip. They are just here because V4L2 expects a default */
+#define OV7120_DFL_EXP 0x7f
+#define OV7620_DFL_EXP 0x7f
+
+/* Window parameters */
+#define HWSBASE 0x2F /* From 7620.SET (spec is wrong) */
+#define HWEBASE 0x2F
+#define VWSBASE 0x05
+#define VWEBASE 0x05
+
+struct ov7x20 {
+ int auto_brt;
+ int auto_exp;
+ int auto_gain;
+ int backlight;
+ int bandfilt;
+ int mirror;
+};
+
+/* Contrast look-up table */
+static unsigned char ctab[] = {
+ 0x01, 0x05, 0x09, 0x11, 0x15, 0x35, 0x37, 0x57,
+ 0x5b, 0xa5, 0xa7, 0xc7, 0xc9, 0xcf, 0xef, 0xff
+};
+
+/* Settings for (Black & White) OV7120 camera chip */
+static struct ovcamchip_regvals regvals_init_7120[] = {
+ { 0x12, 0x80 }, /* reset */
+ { 0x13, 0x00 }, /* Autoadjust off */
+ { 0x12, 0x20 }, /* Disable AWB */
+ { 0x13, DFL_AUTO_GAIN?0x01:0x00 }, /* Autoadjust on (if desired) */
+ { 0x00, OV7120_DFL_GAIN },
+ { 0x01, 0x80 },
+ { 0x02, 0x80 },
+ { 0x03, OV7120_DFL_SAT },
+ { 0x06, OV7120_DFL_BRIGHT },
+ { 0x07, 0x00 },
+ { 0x0c, 0x20 },
+ { 0x0d, 0x20 },
+ { 0x11, 0x01 },
+ { 0x14, 0x84 },
+ { 0x15, 0x01 },
+ { 0x16, 0x03 },
+ { 0x17, 0x2f },
+ { 0x18, 0xcf },
+ { 0x19, 0x06 },
+ { 0x1a, 0xf5 },
+ { 0x1b, 0x00 },
+ { 0x20, 0x08 },
+ { 0x21, 0x80 },
+ { 0x22, 0x80 },
+ { 0x23, 0x00 },
+ { 0x26, 0xa0 },
+ { 0x27, 0xfa },
+ { 0x28, 0x20 }, /* DON'T set bit 6. It is for the OV7620 only */
+ { 0x29, DFL_AUTO_EXP?0x00:0x80 },
+ { 0x2a, 0x10 },
+ { 0x2b, 0x00 },
+ { 0x2c, 0x88 },
+ { 0x2d, 0x95 },
+ { 0x2e, 0x80 },
+ { 0x2f, 0x44 },
+ { 0x60, 0x20 },
+ { 0x61, 0x02 },
+ { 0x62, 0x5f },
+ { 0x63, 0xd5 },
+ { 0x64, 0x57 },
+ { 0x65, 0x83 }, /* OV says "don't change this value" */
+ { 0x66, 0x55 },
+ { 0x67, 0x92 },
+ { 0x68, 0xcf },
+ { 0x69, 0x76 },
+ { 0x6a, 0x22 },
+ { 0x6b, 0xe2 },
+ { 0x6c, 0x40 },
+ { 0x6d, 0x48 },
+ { 0x6e, 0x80 },
+ { 0x6f, 0x0d },
+ { 0x70, 0x89 },
+ { 0x71, 0x00 },
+ { 0x72, 0x14 },
+ { 0x73, 0x54 },
+ { 0x74, 0xa0 },
+ { 0x75, 0x8e },
+ { 0x76, 0x00 },
+ { 0x77, 0xff },
+ { 0x78, 0x80 },
+ { 0x79, 0x80 },
+ { 0x7a, 0x80 },
+ { 0x7b, 0xe6 },
+ { 0x7c, 0x00 },
+ { 0x24, 0x3a },
+ { 0x25, 0x60 },
+ { 0xff, 0xff }, /* END MARKER */
+};
+
+/* Settings for (color) OV7620 camera chip */
+static struct ovcamchip_regvals regvals_init_7620[] = {
+ { 0x12, 0x80 }, /* reset */
+ { 0x00, OV7620_DFL_GAIN },
+ { 0x01, 0x80 },
+ { 0x02, 0x80 },
+ { 0x03, OV7620_DFL_SAT },
+ { 0x06, OV7620_DFL_BRIGHT },
+ { 0x07, 0x00 },
+ { 0x0c, 0x24 },
+ { 0x0c, 0x24 },
+ { 0x0d, 0x24 },
+ { 0x11, 0x01 },
+ { 0x12, 0x24 },
+ { 0x13, DFL_AUTO_GAIN?0x01:0x00 },
+ { 0x14, 0x84 },
+ { 0x15, 0x01 },
+ { 0x16, 0x03 },
+ { 0x17, 0x2f },
+ { 0x18, 0xcf },
+ { 0x19, 0x06 },
+ { 0x1a, 0xf5 },
+ { 0x1b, 0x00 },
+ { 0x20, 0x18 },
+ { 0x21, 0x80 },
+ { 0x22, 0x80 },
+ { 0x23, 0x00 },
+ { 0x26, 0xa2 },
+ { 0x27, 0xea },
+ { 0x28, 0x20 },
+ { 0x29, DFL_AUTO_EXP?0x00:0x80 },
+ { 0x2a, 0x10 },
+ { 0x2b, 0x00 },
+ { 0x2c, 0x88 },
+ { 0x2d, 0x91 },
+ { 0x2e, 0x80 },
+ { 0x2f, 0x44 },
+ { 0x60, 0x27 },
+ { 0x61, 0x02 },
+ { 0x62, 0x5f },
+ { 0x63, 0xd5 },
+ { 0x64, 0x57 },
+ { 0x65, 0x83 },
+ { 0x66, 0x55 },
+ { 0x67, 0x92 },
+ { 0x68, 0xcf },
+ { 0x69, 0x76 },
+ { 0x6a, 0x22 },
+ { 0x6b, 0x00 },
+ { 0x6c, 0x02 },
+ { 0x6d, 0x44 },
+ { 0x6e, 0x80 },
+ { 0x6f, 0x1d },
+ { 0x70, 0x8b },
+ { 0x71, 0x00 },
+ { 0x72, 0x14 },
+ { 0x73, 0x54 },
+ { 0x74, 0x00 },
+ { 0x75, 0x8e },
+ { 0x76, 0x00 },
+ { 0x77, 0xff },
+ { 0x78, 0x80 },
+ { 0x79, 0x80 },
+ { 0x7a, 0x80 },
+ { 0x7b, 0xe2 },
+ { 0x7c, 0x00 },
+ { 0xff, 0xff }, /* END MARKER */
+};
+
+/* Returns index into the specified look-up table, with 'n' elements, for which
+ * the value is greater than or equal to "val". If a match isn't found, (n-1)
+ * is returned. The entries in the table must be in ascending order. */
+static inline int ov7x20_lut_find(unsigned char lut[], int n, unsigned char val)
+{
+ int i = 0;
+
+ while (lut[i] < val && i < n)
+ i++;
+
+ return i;
+}
+
+/* This initializes the OV7x20 camera chip and relevant variables. */
+static int ov7x20_init(struct i2c_client *c)
+{
+ struct ovcamchip *ov = i2c_get_clientdata(c);
+ struct ov7x20 *s;
+ int rc;
+
+ DDEBUG(4, &c->dev, "entered");
+
+ if (ov->mono)
+ rc = ov_write_regvals(c, regvals_init_7120);
+ else
+ rc = ov_write_regvals(c, regvals_init_7620);
+
+ if (rc < 0)
+ return rc;
+
+ ov->spriv = s = kmalloc(sizeof *s, GFP_KERNEL);
+ if (!s)
+ return -ENOMEM;
+ memset(s, 0, sizeof *s);
+
+ s->auto_brt = 1;
+ s->auto_exp = DFL_AUTO_EXP;
+ s->auto_gain = DFL_AUTO_GAIN;
+
+ return 0;
+}
+
+static int ov7x20_free(struct i2c_client *c)
+{
+ struct ovcamchip *ov = i2c_get_clientdata(c);
+
+ kfree(ov->spriv);
+ return 0;
+}
+
+static int ov7x20_set_v4l1_control(struct i2c_client *c,
+ struct ovcamchip_control *ctl)
+{
+ struct ovcamchip *ov = i2c_get_clientdata(c);
+ struct ov7x20 *s = ov->spriv;
+ int rc;
+ int v = ctl->value;
+
+ switch (ctl->id) {
+ case OVCAMCHIP_CID_CONT:
+ {
+ /* Use Y gamma control instead. Bit 0 enables it. */
+ rc = ov_write(c, 0x64, ctab[v >> 12]);
+ break;
+ }
+ case OVCAMCHIP_CID_BRIGHT:
+ /* 7620 doesn't like manual changes when in auto mode */
+ if (!s->auto_brt)
+ rc = ov_write(c, REG_BRT, v >> 8);
+ else
+ rc = 0;
+ break;
+ case OVCAMCHIP_CID_SAT:
+ rc = ov_write(c, REG_SAT, v >> 8);
+ break;
+ case OVCAMCHIP_CID_EXP:
+ if (!s->auto_exp)
+ rc = ov_write(c, REG_EXP, v);
+ else
+ rc = -EBUSY;
+ break;
+ case OVCAMCHIP_CID_FREQ:
+ {
+ int sixty = (v == 60);
+
+ rc = ov_write_mask(c, 0x2a, sixty?0x00:0x80, 0x80);
+ if (rc < 0)
+ goto out;
+
+ rc = ov_write(c, 0x2b, sixty?0x00:0xac);
+ if (rc < 0)
+ goto out;
+
+ rc = ov_write_mask(c, 0x76, 0x01, 0x01);
+ break;
+ }
+ case OVCAMCHIP_CID_BANDFILT:
+ rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04);
+ s->bandfilt = v;
+ break;
+ case OVCAMCHIP_CID_AUTOBRIGHT:
+ rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10);
+ s->auto_brt = v;
+ break;
+ case OVCAMCHIP_CID_AUTOEXP:
+ rc = ov_write_mask(c, 0x13, v?0x01:0x00, 0x01);
+ s->auto_exp = v;
+ break;
+ case OVCAMCHIP_CID_BACKLIGHT:
+ {
+ rc = ov_write_mask(c, 0x68, v?0xe0:0xc0, 0xe0);
+ if (rc < 0)
+ goto out;
+
+ rc = ov_write_mask(c, 0x29, v?0x08:0x00, 0x08);
+ if (rc < 0)
+ goto out;
+
+ rc = ov_write_mask(c, 0x28, v?0x02:0x00, 0x02);
+ s->backlight = v;
+ break;
+ }
+ case OVCAMCHIP_CID_MIRROR:
+ rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40);
+ s->mirror = v;
+ break;
+ default:
+ DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
+ return -EPERM;
+ }
+
+out:
+ DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc);
+ return rc;
+}
+
+static int ov7x20_get_v4l1_control(struct i2c_client *c,
+ struct ovcamchip_control *ctl)
+{
+ struct ovcamchip *ov = i2c_get_clientdata(c);
+ struct ov7x20 *s = ov->spriv;
+ int rc = 0;
+ unsigned char val = 0;
+
+ switch (ctl->id) {
+ case OVCAMCHIP_CID_CONT:
+ rc = ov_read(c, 0x64, &val);
+ ctl->value = ov7x20_lut_find(ctab, 16, val) << 12;
+ break;
+ case OVCAMCHIP_CID_BRIGHT:
+ rc = ov_read(c, REG_BRT, &val);
+ ctl->value = val << 8;
+ break;
+ case OVCAMCHIP_CID_SAT:
+ rc = ov_read(c, REG_SAT, &val);
+ ctl->value = val << 8;
+ break;
+ case OVCAMCHIP_CID_EXP:
+ rc = ov_read(c, REG_EXP, &val);
+ ctl->value = val;
+ break;
+ case OVCAMCHIP_CID_BANDFILT:
+ ctl->value = s->bandfilt;
+ break;
+ case OVCAMCHIP_CID_AUTOBRIGHT:
+ ctl->value = s->auto_brt;
+ break;
+ case OVCAMCHIP_CID_AUTOEXP:
+ ctl->value = s->auto_exp;
+ break;
+ case OVCAMCHIP_CID_BACKLIGHT:
+ ctl->value = s->backlight;
+ break;
+ case OVCAMCHIP_CID_MIRROR:
+ ctl->value = s->mirror;
+ break;
+ default:
+ DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
+ return -EPERM;
+ }
+
+ DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc);
+ return rc;
+}
+
+static int ov7x20_mode_init(struct i2c_client *c, struct ovcamchip_window *win)
+{
+ struct ovcamchip *ov = i2c_get_clientdata(c);
+ int qvga = win->quarter;
+
+ /******** QVGA-specific regs ********/
+ ov_write_mask(c, 0x14, qvga?0x20:0x00, 0x20);
+ ov_write_mask(c, 0x28, qvga?0x00:0x20, 0x20);
+ ov_write(c, 0x24, qvga?0x20:0x3a);
+ ov_write(c, 0x25, qvga?0x30:0x60);
+ ov_write_mask(c, 0x2d, qvga?0x40:0x00, 0x40);
+ if (!ov->mono)
+ ov_write_mask(c, 0x67, qvga?0xf0:0x90, 0xf0);
+ ov_write_mask(c, 0x74, qvga?0x20:0x00, 0x20);
+
+ /******** Clock programming ********/
+
+ ov_write(c, 0x11, win->clockdiv);
+
+ return 0;
+}
+
+static int ov7x20_set_window(struct i2c_client *c, struct ovcamchip_window *win)
+{
+ int ret, hwscale, vwscale;
+
+ ret = ov7x20_mode_init(c, win);
+ if (ret < 0)
+ return ret;
+
+ if (win->quarter) {
+ hwscale = 1;
+ vwscale = 0;
+ } else {
+ hwscale = 2;
+ vwscale = 1;
+ }
+
+ ov_write(c, 0x17, HWSBASE + (win->x >> hwscale));
+ ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale));
+ ov_write(c, 0x19, VWSBASE + (win->y >> vwscale));
+ ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale));
+
+ return 0;
+}
+
+static int ov7x20_command(struct i2c_client *c, unsigned int cmd, void *arg)
+{
+ switch (cmd) {
+ case OVCAMCHIP_CMD_S_CTRL:
+ return ov7x20_set_v4l1_control(c, arg);
+ case OVCAMCHIP_CMD_G_CTRL:
+ return ov7x20_get_v4l1_control(c, arg);
+ case OVCAMCHIP_CMD_S_MODE:
+ return ov7x20_set_window(c, arg);
+ default:
+ DDEBUG(2, &c->dev, "command not supported: %d", cmd);
+ return -ENOIOCTLCMD;
+ }
+}
+
+struct ovcamchip_ops ov7x20_ops = {
+ .init = ov7x20_init,
+ .free = ov7x20_free,
+ .command = ov7x20_command,
+};
diff --git a/drivers/media/video/ovcamchip/ovcamchip_core.c b/drivers/media/video/ovcamchip/ovcamchip_core.c
new file mode 100644
index 00000000000..54dd5612d3b
--- /dev/null
+++ b/drivers/media/video/ovcamchip/ovcamchip_core.c
@@ -0,0 +1,444 @@
+/* Shared Code for OmniVision Camera Chip Drivers
+ *
+ * Copyright (c) 2004 Mark McClelland <mark@alpha.dyndns.org>
+ * http://alpha.dyndns.org/ov511/
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
+ */
+
+#define DEBUG
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include "ovcamchip_priv.h"
+
+#define DRIVER_VERSION "v2.27 for Linux 2.6"
+#define DRIVER_AUTHOR "Mark McClelland <mark@alpha.dyndns.org>"
+#define DRIVER_DESC "OV camera chip I2C driver"
+
+#define PINFO(fmt, args...) printk(KERN_INFO "ovcamchip: " fmt "\n" , ## args);
+#define PERROR(fmt, args...) printk(KERN_ERR "ovcamchip: " fmt "\n" , ## args);
+
+#ifdef DEBUG
+int ovcamchip_debug = 0;
+static int debug;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug,
+ "Debug level: 0=none, 1=inits, 2=warning, 3=config, 4=functions, 5=all");
+#endif
+
+/* By default, let bridge driver tell us if chip is monochrome. mono=0
+ * will ignore that and always treat chips as color. mono=1 will force
+ * monochrome mode for all chips. */
+static int mono = -1;
+module_param(mono, int, 0);
+MODULE_PARM_DESC(mono,
+ "1=chips are monochrome (OVx1xx), 0=force color, -1=autodetect (default)");
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+/* Registers common to all chips, that are needed for detection */
+#define GENERIC_REG_ID_HIGH 0x1C /* manufacturer ID MSB */
+#define GENERIC_REG_ID_LOW 0x1D /* manufacturer ID LSB */
+#define GENERIC_REG_COM_I 0x29 /* misc ID bits */
+
+extern struct ovcamchip_ops ov6x20_ops;
+extern struct ovcamchip_ops ov6x30_ops;
+extern struct ovcamchip_ops ov7x10_ops;
+extern struct ovcamchip_ops ov7x20_ops;
+extern struct ovcamchip_ops ov76be_ops;
+
+static char *chip_names[NUM_CC_TYPES] = {
+ [CC_UNKNOWN] = "Unknown chip",
+ [CC_OV76BE] = "OV76BE",
+ [CC_OV7610] = "OV7610",
+ [CC_OV7620] = "OV7620",
+ [CC_OV7620AE] = "OV7620AE",
+ [CC_OV6620] = "OV6620",
+ [CC_OV6630] = "OV6630",
+ [CC_OV6630AE] = "OV6630AE",
+ [CC_OV6630AF] = "OV6630AF",
+};
+
+/* Forward declarations */
+static struct i2c_driver driver;
+static struct i2c_client client_template;
+
+/* ----------------------------------------------------------------------- */
+
+int ov_write_regvals(struct i2c_client *c, struct ovcamchip_regvals *rvals)
+{
+ int rc;
+
+ while (rvals->reg != 0xff) {
+ rc = ov_write(c, rvals->reg, rvals->val);
+ if (rc < 0)
+ return rc;
+ rvals++;
+ }
+
+ return 0;
+}
+
+/* Writes bits at positions specified by mask to an I2C reg. Bits that are in
+ * the same position as 1's in "mask" are cleared and set to "value". Bits
+ * that are in the same position as 0's in "mask" are preserved, regardless
+ * of their respective state in "value".
+ */
+int ov_write_mask(struct i2c_client *c,
+ unsigned char reg,
+ unsigned char value,
+ unsigned char mask)
+{
+ int rc;
+ unsigned char oldval, newval;
+
+ if (mask == 0xff) {
+ newval = value;
+ } else {
+ rc = ov_read(c, reg, &oldval);
+ if (rc < 0)
+ return rc;
+
+ oldval &= (~mask); /* Clear the masked bits */
+ value &= mask; /* Enforce mask on value */
+ newval = oldval | value; /* Set the desired bits */
+ }
+
+ return ov_write(c, reg, newval);
+}
+
+/* ----------------------------------------------------------------------- */
+
+/* Reset the chip and ensure that I2C is synchronized. Returns <0 if failure.
+ */
+static int init_camchip(struct i2c_client *c)
+{
+ int i, success;
+ unsigned char high, low;
+
+ /* Reset the chip */
+ ov_write(c, 0x12, 0x80);
+
+ /* Wait for it to initialize */
+ msleep(150);
+
+ for (i = 0, success = 0; i < I2C_DETECT_RETRIES && !success; i++) {
+ if (ov_read(c, GENERIC_REG_ID_HIGH, &high) >= 0) {
+ if (ov_read(c, GENERIC_REG_ID_LOW, &low) >= 0) {
+ if (high == 0x7F && low == 0xA2) {
+ success = 1;
+ continue;
+ }
+ }
+ }
+
+ /* Reset the chip */
+ ov_write(c, 0x12, 0x80);
+
+ /* Wait for it to initialize */
+ msleep(150);
+
+ /* Dummy read to sync I2C */
+ ov_read(c, 0x00, &low);
+ }
+
+ if (!success)
+ return -EIO;
+
+ PDEBUG(1, "I2C synced in %d attempt(s)", i);
+
+ return 0;
+}
+
+/* This detects the OV7610, OV7620, or OV76BE chip. */
+static int ov7xx0_detect(struct i2c_client *c)
+{
+ struct ovcamchip *ov = i2c_get_clientdata(c);
+ int rc;
+ unsigned char val;
+
+ PDEBUG(4, "");
+
+ /* Detect chip (sub)type */
+ rc = ov_read(c, GENERIC_REG_COM_I, &val);
+ if (rc < 0) {
+ PERROR("Error detecting ov7xx0 type");
+ return rc;
+ }
+
+ if ((val & 3) == 3) {
+ PINFO("Camera chip is an OV7610");
+ ov->subtype = CC_OV7610;
+ } else if ((val & 3) == 1) {
+ rc = ov_read(c, 0x15, &val);
+ if (rc < 0) {
+ PERROR("Error detecting ov7xx0 type");
+ return rc;
+ }
+
+ if (val & 1) {
+ PINFO("Camera chip is an OV7620AE");
+ /* OV7620 is a close enough match for now. There are
+ * some definite differences though, so this should be
+ * fixed */
+ ov->subtype = CC_OV7620;
+ } else {
+ PINFO("Camera chip is an OV76BE");
+ ov->subtype = CC_OV76BE;
+ }
+ } else if ((val & 3) == 0) {
+ PINFO("Camera chip is an OV7620");
+ ov->subtype = CC_OV7620;
+ } else {
+ PERROR("Unknown camera chip version: %d", val & 3);
+ return -ENOSYS;
+ }
+
+ if (ov->subtype == CC_OV76BE)
+ ov->sops = &ov76be_ops;
+ else if (ov->subtype == CC_OV7620)
+ ov->sops = &ov7x20_ops;
+ else
+ ov->sops = &ov7x10_ops;
+
+ return 0;
+}
+
+/* This detects the OV6620, OV6630, OV6630AE, or OV6630AF chip. */
+static int ov6xx0_detect(struct i2c_client *c)
+{
+ struct ovcamchip *ov = i2c_get_clientdata(c);
+ int rc;
+ unsigned char val;
+
+ PDEBUG(4, "");
+
+ /* Detect chip (sub)type */
+ rc = ov_read(c, GENERIC_REG_COM_I, &val);
+ if (rc < 0) {
+ PERROR("Error detecting ov6xx0 type");
+ return -1;
+ }
+
+ if ((val & 3) == 0) {
+ ov->subtype = CC_OV6630;
+ PINFO("Camera chip is an OV6630");
+ } else if ((val & 3) == 1) {
+ ov->subtype = CC_OV6620;
+ PINFO("Camera chip is an OV6620");
+ } else if ((val & 3) == 2) {
+ ov->subtype = CC_OV6630;
+ PINFO("Camera chip is an OV6630AE");
+ } else if ((val & 3) == 3) {
+ ov->subtype = CC_OV6630;
+ PINFO("Camera chip is an OV6630AF");
+ }
+
+ if (ov->subtype == CC_OV6620)
+ ov->sops = &ov6x20_ops;
+ else
+ ov->sops = &ov6x30_ops;
+
+ return 0;
+}
+
+static int ovcamchip_detect(struct i2c_client *c)
+{
+ /* Ideally we would just try a single register write and see if it NAKs.
+ * That isn't possible since the OV518 can't report I2C transaction
+ * failures. So, we have to try to initialize the chip (i.e. reset it
+ * and check the ID registers) to detect its presence. */
+
+ /* Test for 7xx0 */
+ PDEBUG(3, "Testing for 0V7xx0");
+ c->addr = OV7xx0_SID;
+ if (init_camchip(c) < 0) {
+ /* Test for 6xx0 */
+ PDEBUG(3, "Testing for 0V6xx0");
+ c->addr = OV6xx0_SID;
+ if (init_camchip(c) < 0) {
+ return -ENODEV;
+ } else {
+ if (ov6xx0_detect(c) < 0) {
+ PERROR("Failed to init OV6xx0");
+ return -EIO;
+ }
+ }
+ } else {
+ if (ov7xx0_detect(c) < 0) {
+ PERROR("Failed to init OV7xx0");
+ return -EIO;
+ }
+ }
+
+ return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static int ovcamchip_attach(struct i2c_adapter *adap)
+{
+ int rc = 0;
+ struct ovcamchip *ov;
+ struct i2c_client *c;
+
+ /* I2C is not a PnP bus, so we can never be certain that we're talking
+ * to the right chip. To prevent damage to EEPROMS and such, only
+ * attach to adapters that are known to contain OV camera chips. */
+
+ switch (adap->id) {
+ case (I2C_ALGO_SMBUS | I2C_HW_SMBUS_OV511):
+ case (I2C_ALGO_SMBUS | I2C_HW_SMBUS_OV518):
+ case (I2C_ALGO_SMBUS | I2C_HW_SMBUS_OVFX2):
+ case (I2C_ALGO_SMBUS | I2C_HW_SMBUS_W9968CF):
+ PDEBUG(1, "Adapter ID 0x%06x accepted", adap->id);
+ break;
+ default:
+ PDEBUG(1, "Adapter ID 0x%06x rejected", adap->id);
+ return -ENODEV;
+ }
+
+ c = kmalloc(sizeof *c, GFP_KERNEL);
+ if (!c) {
+ rc = -ENOMEM;
+ goto no_client;
+ }
+ memcpy(c, &client_template, sizeof *c);
+ c->adapter = adap;
+ strcpy(i2c_clientname(c), "OV????");
+
+ ov = kmalloc(sizeof *ov, GFP_KERNEL);
+ if (!ov) {
+ rc = -ENOMEM;
+ goto no_ov;
+ }
+ memset(ov, 0, sizeof *ov);
+ i2c_set_clientdata(c, ov);
+
+ rc = ovcamchip_detect(c);
+ if (rc < 0)
+ goto error;
+
+ strcpy(i2c_clientname(c), chip_names[ov->subtype]);
+
+ PDEBUG(1, "Camera chip detection complete");
+
+ i2c_attach_client(c);
+
+ return rc;
+error:
+ kfree(ov);
+no_ov:
+ kfree(c);
+no_client:
+ PDEBUG(1, "returning %d", rc);
+ return rc;
+}
+
+static int ovcamchip_detach(struct i2c_client *c)
+{
+ struct ovcamchip *ov = i2c_get_clientdata(c);
+ int rc;
+
+ rc = ov->sops->free(c);
+ if (rc < 0)
+ return rc;
+
+ i2c_detach_client(c);
+
+ kfree(ov);
+ kfree(c);
+ return 0;
+}
+
+static int ovcamchip_command(struct i2c_client *c, unsigned int cmd, void *arg)
+{
+ struct ovcamchip *ov = i2c_get_clientdata(c);
+
+ if (!ov->initialized &&
+ cmd != OVCAMCHIP_CMD_Q_SUBTYPE &&
+ cmd != OVCAMCHIP_CMD_INITIALIZE) {
+ dev_err(&c->dev, "ERROR: Camera chip not initialized yet!\n");
+ return -EPERM;
+ }
+
+ switch (cmd) {
+ case OVCAMCHIP_CMD_Q_SUBTYPE:
+ {
+ *(int *)arg = ov->subtype;
+ return 0;
+ }
+ case OVCAMCHIP_CMD_INITIALIZE:
+ {
+ int rc;
+
+ if (mono == -1)
+ ov->mono = *(int *)arg;
+ else
+ ov->mono = mono;
+
+ if (ov->mono) {
+ if (ov->subtype != CC_OV7620)
+ dev_warn(&c->dev, "Warning: Monochrome not "
+ "implemented for this chip\n");
+ else
+ dev_info(&c->dev, "Initializing chip as "
+ "monochrome\n");
+ }
+
+ rc = ov->sops->init(c);
+ if (rc < 0)
+ return rc;
+
+ ov->initialized = 1;
+ return 0;
+ }
+ default:
+ return ov->sops->command(c, cmd, arg);
+ }
+}
+
+/* ----------------------------------------------------------------------- */
+
+static struct i2c_driver driver = {
+ .owner = THIS_MODULE,
+ .name = "ovcamchip",
+ .id = I2C_DRIVERID_OVCAMCHIP,
+ .class = I2C_CLASS_CAM_DIGITAL,
+ .flags = I2C_DF_NOTIFY,
+ .attach_adapter = ovcamchip_attach,
+ .detach_client = ovcamchip_detach,
+ .command = ovcamchip_command,
+};
+
+static struct i2c_client client_template = {
+ I2C_DEVNAME("(unset)"),
+ .driver = &driver,
+};
+
+static int __init ovcamchip_init(void)
+{
+#ifdef DEBUG
+ ovcamchip_debug = debug;
+#endif
+
+ PINFO(DRIVER_VERSION " : " DRIVER_DESC);
+ return i2c_add_driver(&driver);
+}
+
+static void __exit ovcamchip_exit(void)
+{
+ i2c_del_driver(&driver);
+}
+
+module_init(ovcamchip_init);
+module_exit(ovcamchip_exit);
diff --git a/drivers/media/video/ovcamchip/ovcamchip_priv.h b/drivers/media/video/ovcamchip/ovcamchip_priv.h
new file mode 100644
index 00000000000..575e612a554
--- /dev/null
+++ b/drivers/media/video/ovcamchip/ovcamchip_priv.h
@@ -0,0 +1,87 @@
+/* OmniVision* camera chip driver private definitions for core code and
+ * chip-specific code
+ *
+ * Copyright (c) 1999-2004 Mark McClelland
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
+ *
+ * * OmniVision is a trademark of OmniVision Technologies, Inc. This driver
+ * is not sponsored or developed by them.
+ */
+
+#ifndef __LINUX_OVCAMCHIP_PRIV_H
+#define __LINUX_OVCAMCHIP_PRIV_H
+
+#include <media/ovcamchip.h>
+
+#ifdef DEBUG
+extern int ovcamchip_debug;
+#endif
+
+#define PDEBUG(level, fmt, args...) \
+ if (ovcamchip_debug >= (level)) pr_debug("[%s:%d] " fmt "\n", \
+ __FUNCTION__, __LINE__ , ## args)
+
+#define DDEBUG(level, dev, fmt, args...) \
+ if (ovcamchip_debug >= (level)) dev_dbg(dev, "[%s:%d] " fmt "\n", \
+ __FUNCTION__, __LINE__ , ## args)
+
+/* Number of times to retry chip detection. Increase this if you are getting
+ * "Failed to init camera chip" */
+#define I2C_DETECT_RETRIES 10
+
+struct ovcamchip_regvals {
+ unsigned char reg;
+ unsigned char val;
+};
+
+struct ovcamchip_ops {
+ int (*init)(struct i2c_client *);
+ int (*free)(struct i2c_client *);
+ int (*command)(struct i2c_client *, unsigned int, void *);
+};
+
+struct ovcamchip {
+ struct ovcamchip_ops *sops;
+ void *spriv; /* Private data for OV7x10.c etc... */
+ int subtype; /* = SEN_OV7610 etc... */
+ int mono; /* Monochrome chip? (invalid until init) */
+ int initialized; /* OVCAMCHIP_CMD_INITIALIZE was successful */
+};
+
+/* --------------------------------- */
+/* I2C I/O */
+/* --------------------------------- */
+
+static inline int ov_read(struct i2c_client *c, unsigned char reg,
+ unsigned char *value)
+{
+ int rc;
+
+ rc = i2c_smbus_read_byte_data(c, reg);
+ *value = (unsigned char) rc;
+ return rc;
+}
+
+static inline int ov_write(struct i2c_client *c, unsigned char reg,
+ unsigned char value )
+{
+ return i2c_smbus_write_byte_data(c, reg, value);
+}
+
+/* --------------------------------- */
+/* FUNCTION PROTOTYPES */
+/* --------------------------------- */
+
+/* Functions in ovcamchip_core.c */
+
+extern int ov_write_regvals(struct i2c_client *c,
+ struct ovcamchip_regvals *rvals);
+
+extern int ov_write_mask(struct i2c_client *c, unsigned char reg,
+ unsigned char value, unsigned char mask);
+
+#endif