diff options
Diffstat (limited to 'drivers/mmc')
| -rw-r--r-- | drivers/mmc/core/sd.c | 63 | ||||
| -rw-r--r-- | drivers/mmc/host/sdhci.c | 10 |
2 files changed, 73 insertions, 0 deletions
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index 6970b82171f..8e2d8012e4c 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -512,6 +512,64 @@ static int sd_set_bus_speed_mode(struct mmc_card *card, u8 *status) return 0; } +static int sd_set_current_limit(struct mmc_card *card, u8 *status) +{ + int current_limit = 0; + int err; + + /* + * Current limit switch is only defined for SDR50, SDR104, and DDR50 + * bus speed modes. For other bus speed modes, we set the default + * current limit of 200mA. + */ + if ((card->sd_bus_speed == UHS_SDR50_BUS_SPEED) || + (card->sd_bus_speed == UHS_SDR104_BUS_SPEED) || + (card->sd_bus_speed == UHS_DDR50_BUS_SPEED)) { + if (card->host->caps & MMC_CAP_MAX_CURRENT_800) { + if (card->sw_caps.sd3_curr_limit & SD_MAX_CURRENT_800) + current_limit = SD_SET_CURRENT_LIMIT_800; + else if (card->sw_caps.sd3_curr_limit & + SD_MAX_CURRENT_600) + current_limit = SD_SET_CURRENT_LIMIT_600; + else if (card->sw_caps.sd3_curr_limit & + SD_MAX_CURRENT_400) + current_limit = SD_SET_CURRENT_LIMIT_400; + else if (card->sw_caps.sd3_curr_limit & + SD_MAX_CURRENT_200) + current_limit = SD_SET_CURRENT_LIMIT_200; + } else if (card->host->caps & MMC_CAP_MAX_CURRENT_600) { + if (card->sw_caps.sd3_curr_limit & SD_MAX_CURRENT_600) + current_limit = SD_SET_CURRENT_LIMIT_600; + else if (card->sw_caps.sd3_curr_limit & + SD_MAX_CURRENT_400) + current_limit = SD_SET_CURRENT_LIMIT_400; + else if (card->sw_caps.sd3_curr_limit & + SD_MAX_CURRENT_200) + current_limit = SD_SET_CURRENT_LIMIT_200; + } else if (card->host->caps & MMC_CAP_MAX_CURRENT_400) { + if (card->sw_caps.sd3_curr_limit & SD_MAX_CURRENT_400) + current_limit = SD_SET_CURRENT_LIMIT_400; + else if (card->sw_caps.sd3_curr_limit & + SD_MAX_CURRENT_200) + current_limit = SD_SET_CURRENT_LIMIT_200; + } else if (card->host->caps & MMC_CAP_MAX_CURRENT_200) { + if (card->sw_caps.sd3_curr_limit & SD_MAX_CURRENT_200) + current_limit = SD_SET_CURRENT_LIMIT_200; + } + } else + current_limit = SD_SET_CURRENT_LIMIT_200; + + err = mmc_sd_switch(card, 1, 3, current_limit, status); + if (err) + return err; + + if (((status[15] >> 4) & 0x0F) != current_limit) + printk(KERN_WARNING "%s: Problem setting current limit!\n", + mmc_hostname(card->host)); + + return 0; +} + /* * UHS-I specific initialization procedure */ @@ -550,6 +608,11 @@ static int mmc_sd_init_uhs_card(struct mmc_card *card) /* Set bus speed mode of the card */ err = sd_set_bus_speed_mode(card, status); + if (err) + goto out; + + /* Set current limit for the card */ + err = sd_set_current_limit(card, status); out: kfree(status); diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 8994493dd94..2a15aad2eba 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -2216,6 +2216,16 @@ int sdhci_add_host(struct sdhci_host *host) if (max_current_180 > 150) mmc->caps |= MMC_CAP_SET_XPC_180; + + /* Maximum current capabilities of the host at 1.8V */ + if (max_current_180 >= 800) + mmc->caps |= MMC_CAP_MAX_CURRENT_800; + else if (max_current_180 >= 600) + mmc->caps |= MMC_CAP_MAX_CURRENT_600; + else if (max_current_180 >= 400) + mmc->caps |= MMC_CAP_MAX_CURRENT_400; + else + mmc->caps |= MMC_CAP_MAX_CURRENT_200; } mmc->ocr_avail = ocr_avail; |