diff options
Diffstat (limited to 'drivers/mtd/nand/gpmi-nand')
| -rw-r--r-- | drivers/mtd/nand/gpmi-nand/gpmi-lib.c | 322 | ||||
| -rw-r--r-- | drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 152 | ||||
| -rw-r--r-- | drivers/mtd/nand/gpmi-nand/gpmi-nand.h | 26 | ||||
| -rw-r--r-- | drivers/mtd/nand/gpmi-nand/gpmi-regs.h | 12 |
4 files changed, 427 insertions, 85 deletions
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c index a1f43329ad4..3502accd4bc 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c @@ -26,7 +26,7 @@ #include "gpmi-regs.h" #include "bch-regs.h" -struct timing_threshod timing_default_threshold = { +static struct timing_threshod timing_default_threshold = { .max_data_setup_cycles = (BM_GPMI_TIMING0_DATA_SETUP >> BP_GPMI_TIMING0_DATA_SETUP), .internal_data_setup_in_ns = 0, @@ -124,12 +124,42 @@ error: return -ETIMEDOUT; } +static int __gpmi_enable_clk(struct gpmi_nand_data *this, bool v) +{ + struct clk *clk; + int ret; + int i; + + for (i = 0; i < GPMI_CLK_MAX; i++) { + clk = this->resources.clock[i]; + if (!clk) + break; + + if (v) { + ret = clk_prepare_enable(clk); + if (ret) + goto err_clk; + } else { + clk_disable_unprepare(clk); + } + } + return 0; + +err_clk: + for (; i > 0; i--) + clk_disable_unprepare(this->resources.clock[i - 1]); + return ret; +} + +#define gpmi_enable_clk(x) __gpmi_enable_clk(x, true) +#define gpmi_disable_clk(x) __gpmi_enable_clk(x, false) + int gpmi_init(struct gpmi_nand_data *this) { struct resources *r = &this->resources; int ret; - ret = clk_prepare_enable(r->clock); + ret = gpmi_enable_clk(this); if (ret) goto err_out; ret = gpmi_reset_block(r->gpmi_regs, false); @@ -149,7 +179,7 @@ int gpmi_init(struct gpmi_nand_data *this) /* Select BCH ECC. */ writel(BM_GPMI_CTRL1_BCH_MODE, r->gpmi_regs + HW_GPMI_CTRL1_SET); - clk_disable_unprepare(r->clock); + gpmi_disable_clk(this); return 0; err_out: return ret; @@ -205,7 +235,7 @@ int bch_set_geometry(struct gpmi_nand_data *this) ecc_strength = bch_geo->ecc_strength >> 1; page_size = bch_geo->page_size; - ret = clk_prepare_enable(r->clock); + ret = gpmi_enable_clk(this); if (ret) goto err_out; @@ -240,7 +270,7 @@ int bch_set_geometry(struct gpmi_nand_data *this) writel(BM_BCH_CTRL_COMPLETE_IRQ_EN, r->bch_regs + HW_BCH_CTRL_SET); - clk_disable_unprepare(r->clock); + gpmi_disable_clk(this); return 0; err_out: return ret; @@ -263,6 +293,7 @@ static int gpmi_nfc_compute_hardware_timing(struct gpmi_nand_data *this, struct gpmi_nfc_hardware_timing *hw) { struct timing_threshod *nfc = &timing_default_threshold; + struct resources *r = &this->resources; struct nand_chip *nand = &this->nand; struct nand_timing target = this->timing; bool improved_timing_is_available; @@ -302,8 +333,9 @@ static int gpmi_nfc_compute_hardware_timing(struct gpmi_nand_data *this, (target.tRHOH_in_ns >= 0) ; /* Inspect the clock. */ + nfc->clock_frequency_in_hz = clk_get_rate(r->clock[0]); clock_frequency_in_hz = nfc->clock_frequency_in_hz; - clock_period_in_ns = 1000000000 / clock_frequency_in_hz; + clock_period_in_ns = NSEC_PER_SEC / clock_frequency_in_hz; /* * The NFC quantizes setup and hold parameters in terms of clock cycles. @@ -698,17 +730,230 @@ return_results: hw->address_setup_in_cycles = address_setup_in_cycles; hw->use_half_periods = dll_use_half_periods; hw->sample_delay_factor = sample_delay_factor; + hw->device_busy_timeout = GPMI_DEFAULT_BUSY_TIMEOUT; + hw->wrn_dly_sel = BV_GPMI_CTRL1_WRN_DLY_SEL_4_TO_8NS; /* Return success. */ return 0; } +/* + * <1> Firstly, we should know what's the GPMI-clock means. + * The GPMI-clock is the internal clock in the gpmi nand controller. + * If you set 100MHz to gpmi nand controller, the GPMI-clock's period + * is 10ns. Mark the GPMI-clock's period as GPMI-clock-period. + * + * <2> Secondly, we should know what's the frequency on the nand chip pins. + * The frequency on the nand chip pins is derived from the GPMI-clock. + * We can get it from the following equation: + * + * F = G / (DS + DH) + * + * F : the frequency on the nand chip pins. + * G : the GPMI clock, such as 100MHz. + * DS : GPMI_HW_GPMI_TIMING0:DATA_SETUP + * DH : GPMI_HW_GPMI_TIMING0:DATA_HOLD + * + * <3> Thirdly, when the frequency on the nand chip pins is above 33MHz, + * the nand EDO(extended Data Out) timing could be applied. + * The GPMI implements a feedback read strobe to sample the read data. + * The feedback read strobe can be delayed to support the nand EDO timing + * where the read strobe may deasserts before the read data is valid, and + * read data is valid for some time after read strobe. + * + * The following figure illustrates some aspects of a NAND Flash read: + * + * |<---tREA---->| + * | | + * | | | + * |<--tRP-->| | + * | | | + * __ ___|__________________________________ + * RDN \________/ | + * | + * /---------\ + * Read Data --------------< >--------- + * \---------/ + * | | + * |<-D->| + * FeedbackRDN ________ ____________ + * \___________/ + * + * D stands for delay, set in the HW_GPMI_CTRL1:RDN_DELAY. + * + * + * <4> Now, we begin to describe how to compute the right RDN_DELAY. + * + * 4.1) From the aspect of the nand chip pins: + * Delay = (tREA + C - tRP) {1} + * + * tREA : the maximum read access time. From the ONFI nand standards, + * we know that tREA is 16ns in mode 5, tREA is 20ns is mode 4. + * Please check it in : www.onfi.org + * C : a constant for adjust the delay. default is 4. + * tRP : the read pulse width. + * Specified by the HW_GPMI_TIMING0:DATA_SETUP: + * tRP = (GPMI-clock-period) * DATA_SETUP + * + * 4.2) From the aspect of the GPMI nand controller: + * Delay = RDN_DELAY * 0.125 * RP {2} + * + * RP : the DLL reference period. + * if (GPMI-clock-period > DLL_THRETHOLD) + * RP = GPMI-clock-period / 2; + * else + * RP = GPMI-clock-period; + * + * Set the HW_GPMI_CTRL1:HALF_PERIOD if GPMI-clock-period + * is greater DLL_THRETHOLD. In other SOCs, the DLL_THRETHOLD + * is 16ns, but in mx6q, we use 12ns. + * + * 4.3) since {1} equals {2}, we get: + * + * (tREA + 4 - tRP) * 8 + * RDN_DELAY = --------------------- {3} + * RP + * + * 4.4) We only support the fastest asynchronous mode of ONFI nand. + * For some ONFI nand, the mode 4 is the fastest mode; + * while for some ONFI nand, the mode 5 is the fastest mode. + * So we only support the mode 4 and mode 5. It is no need to + * support other modes. + */ +static void gpmi_compute_edo_timing(struct gpmi_nand_data *this, + struct gpmi_nfc_hardware_timing *hw) +{ + struct resources *r = &this->resources; + unsigned long rate = clk_get_rate(r->clock[0]); + int mode = this->timing_mode; + int dll_threshold = 16; /* in ns */ + unsigned long delay; + unsigned long clk_period; + int t_rea; + int c = 4; + int t_rp; + int rp; + + /* + * [1] for GPMI_HW_GPMI_TIMING0: + * The async mode requires 40MHz for mode 4, 50MHz for mode 5. + * The GPMI can support 100MHz at most. So if we want to + * get the 40MHz or 50MHz, we have to set DS=1, DH=1. + * Set the ADDRESS_SETUP to 0 in mode 4. + */ + hw->data_setup_in_cycles = 1; + hw->data_hold_in_cycles = 1; + hw->address_setup_in_cycles = ((mode == 5) ? 1 : 0); + + /* [2] for GPMI_HW_GPMI_TIMING1 */ + hw->device_busy_timeout = 0x9000; + + /* [3] for GPMI_HW_GPMI_CTRL1 */ + hw->wrn_dly_sel = BV_GPMI_CTRL1_WRN_DLY_SEL_NO_DELAY; + + if (GPMI_IS_MX6Q(this)) + dll_threshold = 12; + + /* + * Enlarge 10 times for the numerator and denominator in {3}. + * This make us to get more accurate result. + */ + clk_period = NSEC_PER_SEC / (rate / 10); + dll_threshold *= 10; + t_rea = ((mode == 5) ? 16 : 20) * 10; + c *= 10; + + t_rp = clk_period * 1; /* DATA_SETUP is 1 */ + + if (clk_period > dll_threshold) { + hw->use_half_periods = 1; + rp = clk_period / 2; + } else { + hw->use_half_periods = 0; + rp = clk_period; + } + + /* + * Multiply the numerator with 10, we could do a round off: + * 7.8 round up to 8; 7.4 round down to 7. + */ + delay = (((t_rea + c - t_rp) * 8) * 10) / rp; + delay = (delay + 5) / 10; + + hw->sample_delay_factor = delay; +} + +static int enable_edo_mode(struct gpmi_nand_data *this, int mode) +{ + struct resources *r = &this->resources; + struct nand_chip *nand = &this->nand; + struct mtd_info *mtd = &this->mtd; + uint8_t feature[ONFI_SUBFEATURE_PARAM_LEN] = {}; + unsigned long rate; + int ret; + + nand->select_chip(mtd, 0); + + /* [1] send SET FEATURE commond to NAND */ + feature[0] = mode; + ret = nand->onfi_set_features(mtd, nand, + ONFI_FEATURE_ADDR_TIMING_MODE, feature); + if (ret) + goto err_out; + + /* [2] send GET FEATURE command to double-check the timing mode */ + memset(feature, 0, ONFI_SUBFEATURE_PARAM_LEN); + ret = nand->onfi_get_features(mtd, nand, + ONFI_FEATURE_ADDR_TIMING_MODE, feature); + if (ret || feature[0] != mode) + goto err_out; + + nand->select_chip(mtd, -1); + + /* [3] set the main IO clock, 100MHz for mode 5, 80MHz for mode 4. */ + rate = (mode == 5) ? 100000000 : 80000000; + clk_set_rate(r->clock[0], rate); + + /* Let the gpmi_begin() re-compute the timing again. */ + this->flags &= ~GPMI_TIMING_INIT_OK; + + this->flags |= GPMI_ASYNC_EDO_ENABLED; + this->timing_mode = mode; + dev_info(this->dev, "enable the asynchronous EDO mode %d\n", mode); + return 0; + +err_out: + nand->select_chip(mtd, -1); + dev_err(this->dev, "mode:%d ,failed in set feature.\n", mode); + return -EINVAL; +} + +int gpmi_extra_init(struct gpmi_nand_data *this) +{ + struct nand_chip *chip = &this->nand; + + /* Enable the asynchronous EDO feature. */ + if (GPMI_IS_MX6Q(this) && chip->onfi_version) { + int mode = onfi_get_async_timing_mode(chip); + + /* We only support the timing mode 4 and mode 5. */ + if (mode & ONFI_TIMING_MODE_5) + mode = 5; + else if (mode & ONFI_TIMING_MODE_4) + mode = 4; + else + return 0; + + return enable_edo_mode(this, mode); + } + return 0; +} + /* Begin the I/O */ void gpmi_begin(struct gpmi_nand_data *this) { struct resources *r = &this->resources; - struct timing_threshod *nfc = &timing_default_threshold; - unsigned char *gpmi_regs = r->gpmi_regs; + void __iomem *gpmi_regs = r->gpmi_regs; unsigned int clock_period_in_ns; uint32_t reg; unsigned int dll_wait_time_in_us; @@ -716,60 +961,66 @@ void gpmi_begin(struct gpmi_nand_data *this) int ret; /* Enable the clock. */ - ret = clk_prepare_enable(r->clock); + ret = gpmi_enable_clk(this); if (ret) { pr_err("We failed in enable the clk\n"); goto err_out; } - /* set ready/busy timeout */ - writel(0x500 << BP_GPMI_TIMING1_BUSY_TIMEOUT, - gpmi_regs + HW_GPMI_TIMING1); - - /* Get the timing information we need. */ - nfc->clock_frequency_in_hz = clk_get_rate(r->clock); - clock_period_in_ns = 1000000000 / nfc->clock_frequency_in_hz; + /* Only initialize the timing once */ + if (this->flags & GPMI_TIMING_INIT_OK) + return; + this->flags |= GPMI_TIMING_INIT_OK; - gpmi_nfc_compute_hardware_timing(this, &hw); + if (this->flags & GPMI_ASYNC_EDO_ENABLED) + gpmi_compute_edo_timing(this, &hw); + else + gpmi_nfc_compute_hardware_timing(this, &hw); - /* Set up all the simple timing parameters. */ + /* [1] Set HW_GPMI_TIMING0 */ reg = BF_GPMI_TIMING0_ADDRESS_SETUP(hw.address_setup_in_cycles) | BF_GPMI_TIMING0_DATA_HOLD(hw.data_hold_in_cycles) | BF_GPMI_TIMING0_DATA_SETUP(hw.data_setup_in_cycles) ; writel(reg, gpmi_regs + HW_GPMI_TIMING0); - /* - * DLL_ENABLE must be set to 0 when setting RDN_DELAY or HALF_PERIOD. - */ + /* [2] Set HW_GPMI_TIMING1 */ + writel(BF_GPMI_TIMING1_BUSY_TIMEOUT(hw.device_busy_timeout), + gpmi_regs + HW_GPMI_TIMING1); + + /* [3] The following code is to set the HW_GPMI_CTRL1. */ + + /* Set the WRN_DLY_SEL */ + writel(BM_GPMI_CTRL1_WRN_DLY_SEL, gpmi_regs + HW_GPMI_CTRL1_CLR); + writel(BF_GPMI_CTRL1_WRN_DLY_SEL(hw.wrn_dly_sel), + gpmi_regs + HW_GPMI_CTRL1_SET); + + /* DLL_ENABLE must be set to 0 when setting RDN_DELAY or HALF_PERIOD. */ writel(BM_GPMI_CTRL1_DLL_ENABLE, gpmi_regs + HW_GPMI_CTRL1_CLR); /* Clear out the DLL control fields. */ - writel(BM_GPMI_CTRL1_RDN_DELAY, gpmi_regs + HW_GPMI_CTRL1_CLR); - writel(BM_GPMI_CTRL1_HALF_PERIOD, gpmi_regs + HW_GPMI_CTRL1_CLR); + reg = BM_GPMI_CTRL1_RDN_DELAY | BM_GPMI_CTRL1_HALF_PERIOD; + writel(reg, gpmi_regs + HW_GPMI_CTRL1_CLR); /* If no sample delay is called for, return immediately. */ if (!hw.sample_delay_factor) return; - /* Configure the HALF_PERIOD flag. */ - if (hw.use_half_periods) - writel(BM_GPMI_CTRL1_HALF_PERIOD, - gpmi_regs + HW_GPMI_CTRL1_SET); + /* Set RDN_DELAY or HALF_PERIOD. */ + reg = ((hw.use_half_periods) ? BM_GPMI_CTRL1_HALF_PERIOD : 0) + | BF_GPMI_CTRL1_RDN_DELAY(hw.sample_delay_factor); - /* Set the delay factor. */ - writel(BF_GPMI_CTRL1_RDN_DELAY(hw.sample_delay_factor), - gpmi_regs + HW_GPMI_CTRL1_SET); + writel(reg, gpmi_regs + HW_GPMI_CTRL1_SET); - /* Enable the DLL. */ + /* At last, we enable the DLL. */ writel(BM_GPMI_CTRL1_DLL_ENABLE, gpmi_regs + HW_GPMI_CTRL1_SET); /* * After we enable the GPMI DLL, we have to wait 64 clock cycles before - * we can use the GPMI. - * - * Calculate the amount of time we need to wait, in microseconds. + * we can use the GPMI. Calculate the amount of time we need to wait, + * in microseconds. */ + clock_period_in_ns = NSEC_PER_SEC / clk_get_rate(r->clock[0]); dll_wait_time_in_us = (clock_period_in_ns * 64) / 1000; if (!dll_wait_time_in_us) @@ -784,8 +1035,7 @@ err_out: void gpmi_end(struct gpmi_nand_data *this) { - struct resources *r = &this->resources; - clk_disable_unprepare(r->clock); + gpmi_disable_clk(this); } /* Clears a BCH interrupt. */ diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index a6cad5caba7..d79696b2f19 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -18,6 +18,9 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/clk.h> #include <linux/slab.h> #include <linux/interrupt.h> @@ -27,6 +30,7 @@ #include <linux/pinctrl/consumer.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/of_mtd.h> #include "gpmi-nand.h" /* add our owner bbt descriptor */ @@ -113,7 +117,7 @@ int common_nfc_set_geometry(struct gpmi_nand_data *this) /* We use the same ECC strength for all chunks. */ geo->ecc_strength = get_ecc_strength(this); if (!geo->ecc_strength) { - pr_err("We get a wrong ECC strength.\n"); + pr_err("wrong ECC strength.\n"); return -EINVAL; } @@ -316,7 +320,7 @@ acquire_register_block(struct gpmi_nand_data *this, const char *res_name) struct platform_device *pdev = this->pdev; struct resources *res = &this->resources; struct resource *r; - void *p; + void __iomem *p; r = platform_get_resource_byname(pdev, IORESOURCE_MEM, res_name); if (!r) { @@ -423,8 +427,8 @@ static int __devinit acquire_dma_channels(struct gpmi_nand_data *this) struct platform_device *pdev = this->pdev; struct resource *r_dma; struct device_node *dn; - int dma_channel; - unsigned int ret; + u32 dma_channel; + int ret; struct dma_chan *dma_chan; dma_cap_mask_t mask; @@ -464,9 +468,73 @@ acquire_err: return -EINVAL; } +static void gpmi_put_clks(struct gpmi_nand_data *this) +{ + struct resources *r = &this->resources; + struct clk *clk; + int i; + + for (i = 0; i < GPMI_CLK_MAX; i++) { + clk = r->clock[i]; + if (clk) { + clk_put(clk); + r->clock[i] = NULL; + } + } +} + +static char *extra_clks_for_mx6q[GPMI_CLK_MAX] = { + "gpmi_apb", "gpmi_bch", "gpmi_bch_apb", "per1_bch", +}; + +static int __devinit gpmi_get_clks(struct gpmi_nand_data *this) +{ + struct resources *r = &this->resources; + char **extra_clks = NULL; + struct clk *clk; + int i; + + /* The main clock is stored in the first. */ + r->clock[0] = clk_get(this->dev, "gpmi_io"); + if (IS_ERR(r->clock[0])) + goto err_clock; + + /* Get extra clocks */ + if (GPMI_IS_MX6Q(this)) + extra_clks = extra_clks_for_mx6q; + if (!extra_clks) + return 0; + + for (i = 1; i < GPMI_CLK_MAX; i++) { + if (extra_clks[i - 1] == NULL) + break; + + clk = clk_get(this->dev, extra_clks[i - 1]); + if (IS_ERR(clk)) + goto err_clock; + + r->clock[i] = clk; + } + + if (GPMI_IS_MX6Q(this)) + /* + * Set the default value for the gpmi clock in mx6q: + * + * If you want to use the ONFI nand which is in the + * Synchronous Mode, you should change the clock as you need. + */ + clk_set_rate(r->clock[0], 22000000); + + return 0; + +err_clock: + dev_dbg(this->dev, "failed in finding the clocks.\n"); + gpmi_put_clks(this); + return -ENOMEM; +} + static int __devinit acquire_resources(struct gpmi_nand_data *this) { - struct resources *res = &this->resources; struct pinctrl *pinctrl; int ret; @@ -492,12 +560,9 @@ static int __devinit acquire_resources(struct gpmi_nand_data *this) goto exit_pin; } - res->clock = clk_get(&this->pdev->dev, NULL); - if (IS_ERR(res->clock)) { - pr_err("can not get the clock\n"); - ret = -ENOENT; + ret = gpmi_get_clks(this); + if (ret) goto exit_clock; - } return 0; exit_clock: @@ -512,9 +577,7 @@ exit_regs: static void release_resources(struct gpmi_nand_data *this) { - struct resources *r = &this->resources; - - clk_put(r->clock); + gpmi_put_clks(this); release_register_block(this); release_bch_irq(this); release_dma_channels(this); @@ -667,12 +730,12 @@ static int gpmi_alloc_dma_buffer(struct gpmi_nand_data *this) struct device *dev = this->dev; /* [1] Allocate a command buffer. PAGE_SIZE is enough. */ - this->cmd_buffer = kzalloc(PAGE_SIZE, GFP_DMA); + this->cmd_buffer = kzalloc(PAGE_SIZE, GFP_DMA | GFP_KERNEL); if (this->cmd_buffer == NULL) goto error_alloc; /* [2] Allocate a read/write data buffer. PAGE_SIZE is enough. */ - this->data_buffer_dma = kzalloc(PAGE_SIZE, GFP_DMA); + this->data_buffer_dma = kzalloc(PAGE_SIZE, GFP_DMA | GFP_KERNEL); if (this->data_buffer_dma == NULL) goto error_alloc; @@ -930,7 +993,7 @@ exit_nfc: return ret; } -static void gpmi_ecc_write_page(struct mtd_info *mtd, struct nand_chip *chip, +static int gpmi_ecc_write_page(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf, int oob_required) { struct gpmi_nand_data *this = chip->priv; @@ -972,7 +1035,7 @@ static void gpmi_ecc_write_page(struct mtd_info *mtd, struct nand_chip *chip, &payload_virt, &payload_phys); if (ret) { pr_err("Inadequate payload DMA buffer\n"); - return; + return 0; } ret = send_page_prepare(this, @@ -1002,6 +1065,8 @@ exit_auxiliary: nfc_geo->payload_size, payload_virt, payload_phys); } + + return 0; } /* @@ -1064,6 +1129,9 @@ exit_auxiliary: * ECC-based or raw view of the page is implicit in which function it calls * (there is a similar pair of ECC-based/raw functions for writing). * + * FIXME: The following paragraph is incorrect, now that there exist + * ecc.read_oob_raw and ecc.write_oob_raw functions. + * * Since MTD assumes the OOB is not covered by ECC, there is no pair of * ECC-based/raw functions for reading or or writing the OOB. The fact that the * caller wants an ECC-based or raw view of the page is not propagated down to @@ -1190,7 +1258,6 @@ static int mx23_check_transcription_stamp(struct gpmi_nand_data *this) unsigned int search_area_size_in_strides; unsigned int stride; unsigned int page; - loff_t byte; uint8_t *buffer = chip->buffers->databuf; int saved_chip_number; int found_an_ncb_fingerprint = false; @@ -1207,9 +1274,8 @@ static int mx23_check_transcription_stamp(struct gpmi_nand_data *this) dev_dbg(dev, "Scanning for an NCB fingerprint...\n"); for (stride = 0; stride < search_area_size_in_strides; stride++) { - /* Compute the page and byte addresses. */ + /* Compute the page addresses. */ page = stride * rom_geo->stride_size_in_pages; - byte = page * mtd->writesize; dev_dbg(dev, "Looking for a fingerprint in page 0x%x\n", page); @@ -1251,7 +1317,6 @@ static int mx23_write_transcription_stamp(struct gpmi_nand_data *this) unsigned int block; unsigned int stride; unsigned int page; - loff_t byte; uint8_t *buffer = chip->buffers->databuf; int saved_chip_number; int status; @@ -1300,9 +1365,8 @@ static int mx23_write_transcription_stamp(struct gpmi_nand_data *this) /* Loop through the first search area, writing NCB fingerprints. */ dev_dbg(dev, "Writing NCB fingerprints...\n"); for (stride = 0; stride < search_area_size_in_strides; stride++) { - /* Compute the page and byte addresses. */ + /* Compute the page addresses. */ page = stride * rom_geo->stride_size_in_pages; - byte = page * mtd->writesize; /* Write the first page of the current stride. */ dev_dbg(dev, "Writing an NCB fingerprint in page 0x%x\n", page); @@ -1436,6 +1500,7 @@ static int gpmi_pre_bbt_scan(struct gpmi_nand_data *this) /* Adjust the ECC strength according to the chip. */ this->nand.ecc.strength = this->bch_geometry.ecc_strength; this->mtd.ecc_strength = this->bch_geometry.ecc_strength; + this->mtd.bitflip_threshold = this->bch_geometry.ecc_strength; /* NAND boot init, depends on the gpmi_set_geometry(). */ return nand_boot_init(this); @@ -1452,11 +1517,19 @@ static int gpmi_scan_bbt(struct mtd_info *mtd) if (ret) return ret; + /* + * Can we enable the extra features? such as EDO or Sync mode. + * + * We do not check the return value now. That's means if we fail in + * enable the extra features, we still can run in the normal way. + */ + gpmi_extra_init(this); + /* use the default BBT implementation */ return nand_default_bbt(mtd); } -void gpmi_nfc_exit(struct gpmi_nand_data *this) +static void gpmi_nfc_exit(struct gpmi_nand_data *this) { nand_release(&this->mtd); gpmi_free_dma_buffer(this); @@ -1497,6 +1570,8 @@ static int __devinit gpmi_nfc_init(struct gpmi_nand_data *this) chip->ecc.size = 1; chip->ecc.strength = 8; chip->ecc.layout = &gpmi_hw_ecclayout; + if (of_get_nand_on_flash_bbt(this->dev->of_node)) + chip->bbt_options |= NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB; /* Allocate a temporary DMA buffer for reading ID in the nand_scan() */ this->bch_geometry.payload_size = 1024; @@ -1579,6 +1654,8 @@ static int __devinit gpmi_nand_probe(struct platform_device *pdev) if (ret) goto exit_nfc_init; + dev_info(this->dev, "driver registered.\n"); + return 0; exit_nfc_init: @@ -1586,10 +1663,12 @@ exit_nfc_init: exit_acquire_resources: platform_set_drvdata(pdev, NULL); kfree(this); + dev_err(this->dev, "driver registration failed: %d\n", ret); + return ret; } -static int __exit gpmi_nand_remove(struct platform_device *pdev) +static int __devexit gpmi_nand_remove(struct platform_device *pdev) { struct gpmi_nand_data *this = platform_get_drvdata(pdev); @@ -1606,29 +1685,10 @@ static struct platform_driver gpmi_nand_driver = { .of_match_table = gpmi_nand_id_table, }, .probe = gpmi_nand_probe, - .remove = __exit_p(gpmi_nand_remove), + .remove = __devexit_p(gpmi_nand_remove), .id_table = gpmi_ids, }; - -static int __init gpmi_nand_init(void) -{ - int err; - - err = platform_driver_register(&gpmi_nand_driver); - if (err == 0) - printk(KERN_INFO "GPMI NAND driver registered. (IMX)\n"); - else - pr_err("i.MX GPMI NAND driver registration failed\n"); - return err; -} - -static void __exit gpmi_nand_exit(void) -{ - platform_driver_unregister(&gpmi_nand_driver); -} - -module_init(gpmi_nand_init); -module_exit(gpmi_nand_exit); +module_platform_driver(gpmi_nand_driver); MODULE_AUTHOR("Freescale Semiconductor, Inc."); MODULE_DESCRIPTION("i.MX GPMI NAND Flash Controller Driver"); diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h index ce5daa16092..7ac25c1e58f 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h @@ -22,14 +22,15 @@ #include <linux/dma-mapping.h> #include <linux/fsl/mxs-dma.h> +#define GPMI_CLK_MAX 5 /* MX6Q needs five clocks */ struct resources { - void *gpmi_regs; - void *bch_regs; + void __iomem *gpmi_regs; + void __iomem *bch_regs; unsigned int bch_low_interrupt; unsigned int bch_high_interrupt; unsigned int dma_low_channel; unsigned int dma_high_channel; - struct clk *clock; + struct clk *clock[GPMI_CLK_MAX]; }; /** @@ -121,6 +122,11 @@ struct nand_timing { }; struct gpmi_nand_data { + /* flags */ +#define GPMI_ASYNC_EDO_ENABLED (1 << 0) +#define GPMI_TIMING_INIT_OK (1 << 1) + int flags; + /* System Interface */ struct device *dev; struct platform_device *pdev; @@ -131,6 +137,7 @@ struct gpmi_nand_data { /* Flash Hardware */ struct nand_timing timing; + int timing_mode; /* BCH */ struct bch_geometry bch_geometry; @@ -188,16 +195,28 @@ struct gpmi_nand_data { * @data_setup_in_cycles: The data setup time, in cycles. * @data_hold_in_cycles: The data hold time, in cycles. * @address_setup_in_cycles: The address setup time, in cycles. + * @device_busy_timeout: The timeout waiting for NAND Ready/Busy, + * this value is the number of cycles multiplied + * by 4096. * @use_half_periods: Indicates the clock is running slowly, so the * NFC DLL should use half-periods. * @sample_delay_factor: The sample delay factor. + * @wrn_dly_sel: The delay on the GPMI write strobe. */ struct gpmi_nfc_hardware_timing { + /* for HW_GPMI_TIMING0 */ uint8_t data_setup_in_cycles; uint8_t data_hold_in_cycles; uint8_t address_setup_in_cycles; + + /* for HW_GPMI_TIMING1 */ + uint16_t device_busy_timeout; +#define GPMI_DEFAULT_BUSY_TIMEOUT 0x500 /* default busy timeout value.*/ + + /* for HW_GPMI_CTRL1 */ bool use_half_periods; uint8_t sample_delay_factor; + uint8_t wrn_dly_sel; }; /** @@ -246,6 +265,7 @@ extern int start_dma_with_bch_irq(struct gpmi_nand_data *, /* GPMI-NAND helper function library */ extern int gpmi_init(struct gpmi_nand_data *); +extern int gpmi_extra_init(struct gpmi_nand_data *); extern void gpmi_clear_bch(struct gpmi_nand_data *); extern void gpmi_dump_info(struct gpmi_nand_data *); extern int bch_set_geometry(struct gpmi_nand_data *); diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-regs.h b/drivers/mtd/nand/gpmi-nand/gpmi-regs.h index 83431240e2f..53397cc290f 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-regs.h +++ b/drivers/mtd/nand/gpmi-nand/gpmi-regs.h @@ -108,6 +108,15 @@ #define HW_GPMI_CTRL1_CLR 0x00000068 #define HW_GPMI_CTRL1_TOG 0x0000006c +#define BP_GPMI_CTRL1_WRN_DLY_SEL 22 +#define BM_GPMI_CTRL1_WRN_DLY_SEL (0x3 << BP_GPMI_CTRL1_WRN_DLY_SEL) +#define BF_GPMI_CTRL1_WRN_DLY_SEL(v) \ + (((v) << BP_GPMI_CTRL1_WRN_DLY_SEL) & BM_GPMI_CTRL1_WRN_DLY_SEL) +#define BV_GPMI_CTRL1_WRN_DLY_SEL_4_TO_8NS 0x0 +#define BV_GPMI_CTRL1_WRN_DLY_SEL_6_TO_10NS 0x1 +#define BV_GPMI_CTRL1_WRN_DLY_SEL_7_TO_12NS 0x2 +#define BV_GPMI_CTRL1_WRN_DLY_SEL_NO_DELAY 0x3 + #define BM_GPMI_CTRL1_BCH_MODE (1 << 18) #define BP_GPMI_CTRL1_DLL_ENABLE 17 @@ -154,6 +163,9 @@ #define HW_GPMI_TIMING1 0x00000080 #define BP_GPMI_TIMING1_BUSY_TIMEOUT 16 +#define BM_GPMI_TIMING1_BUSY_TIMEOUT (0xffff << BP_GPMI_TIMING1_BUSY_TIMEOUT) +#define BF_GPMI_TIMING1_BUSY_TIMEOUT(v) \ + (((v) << BP_GPMI_TIMING1_BUSY_TIMEOUT) & BM_GPMI_TIMING1_BUSY_TIMEOUT) #define HW_GPMI_TIMING2 0x00000090 #define HW_GPMI_DATA 0x000000a0 |