summaryrefslogtreecommitdiffstats
path: root/drivers/net/e1000e/ethtool.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/e1000e/ethtool.c')
-rw-r--r--drivers/net/e1000e/ethtool.c48
1 files changed, 20 insertions, 28 deletions
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index a14561f40db..cf9679f2b7c 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -189,8 +189,7 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
/* Fiber NICs only allow 1000 gbps Full duplex */
if ((adapter->hw.phy.media_type == e1000_media_type_fiber) &&
spddplx != (SPEED_1000 + DUPLEX_FULL)) {
- ndev_err(adapter->netdev, "Unsupported Speed/Duplex "
- "configuration\n");
+ e_err("Unsupported Speed/Duplex configuration\n");
return -EINVAL;
}
@@ -213,8 +212,7 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
break;
case SPEED_1000 + DUPLEX_HALF: /* not supported */
default:
- ndev_err(adapter->netdev, "Unsupported Speed/Duplex "
- "configuration\n");
+ e_err("Unsupported Speed/Duplex configuration\n");
return -EINVAL;
}
return 0;
@@ -231,8 +229,8 @@ static int e1000_set_settings(struct net_device *netdev,
* cannot be changed
*/
if (e1000_check_reset_block(hw)) {
- ndev_err(netdev, "Cannot change link "
- "characteristics when SoL/IDER is active.\n");
+ e_err("Cannot change link characteristics when SoL/IDER is "
+ "active.\n");
return -EINVAL;
}
@@ -380,8 +378,7 @@ static int e1000_set_tso(struct net_device *netdev, u32 data)
netdev->features &= ~NETIF_F_TSO6;
}
- ndev_info(netdev, "TSO is %s\n",
- data ? "Enabled" : "Disabled");
+ e_info("TSO is %s\n", data ? "Enabled" : "Disabled");
adapter->flags |= FLAG_TSO_FORCE;
return 0;
}
@@ -722,10 +719,9 @@ static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data,
(test[pat] & write));
val = E1000_READ_REG_ARRAY(&adapter->hw, reg, offset);
if (val != (test[pat] & write & mask)) {
- ndev_err(adapter->netdev, "pattern test reg %04X "
- "failed: got 0x%08X expected 0x%08X\n",
- reg + offset,
- val, (test[pat] & write & mask));
+ e_err("pattern test reg %04X failed: got 0x%08X "
+ "expected 0x%08X\n", reg + offset, val,
+ (test[pat] & write & mask));
*data = reg;
return 1;
}
@@ -740,9 +736,8 @@ static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data,
__ew32(&adapter->hw, reg, write & mask);
val = __er32(&adapter->hw, reg);
if ((write & mask) != (val & mask)) {
- ndev_err(adapter->netdev, "set/check reg %04X test failed: "
- "got 0x%08X expected 0x%08X\n", reg, (val & mask),
- (write & mask));
+ e_err("set/check reg %04X test failed: got 0x%08X "
+ "expected 0x%08X\n", reg, (val & mask), (write & mask));
*data = reg;
return 1;
}
@@ -766,7 +761,6 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
{
struct e1000_hw *hw = &adapter->hw;
struct e1000_mac_info *mac = &adapter->hw.mac;
- struct net_device *netdev = adapter->netdev;
u32 value;
u32 before;
u32 after;
@@ -799,8 +793,8 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
ew32(STATUS, toggle);
after = er32(STATUS) & toggle;
if (value != after) {
- ndev_err(netdev, "failed STATUS register test got: "
- "0x%08X expected: 0x%08X\n", after, value);
+ e_err("failed STATUS register test got: 0x%08X expected: "
+ "0x%08X\n", after, value);
*data = 1;
return 1;
}
@@ -903,8 +897,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
*data = 1;
return -1;
}
- ndev_info(netdev, "testing %s interrupt\n",
- (shared_int ? "shared" : "unshared"));
+ e_info("testing %s interrupt\n", (shared_int ? "shared" : "unshared"));
/* Disable all the interrupts */
ew32(IMC, 0xFFFFFFFF);
@@ -1090,7 +1083,7 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
tx_ring->buffer_info[i].dma =
pci_map_single(pdev, skb->data, skb->len,
PCI_DMA_TODEVICE);
- if (pci_dma_mapping_error(tx_ring->buffer_info[i].dma)) {
+ if (pci_dma_mapping_error(pdev, tx_ring->buffer_info[i].dma)) {
ret_val = 4;
goto err_nomem;
}
@@ -1153,7 +1146,7 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
rx_ring->buffer_info[i].dma =
pci_map_single(pdev, skb->data, 2048,
PCI_DMA_FROMDEVICE);
- if (pci_dma_mapping_error(rx_ring->buffer_info[i].dma)) {
+ if (pci_dma_mapping_error(pdev, rx_ring->buffer_info[i].dma)) {
ret_val = 8;
goto err_nomem;
}
@@ -1526,8 +1519,7 @@ static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data)
* sessions are active
*/
if (e1000_check_reset_block(&adapter->hw)) {
- ndev_err(adapter->netdev, "Cannot do PHY loopback test "
- "when SoL/IDER is active.\n");
+ e_err("Cannot do PHY loopback test when SoL/IDER is active.\n");
*data = 0;
goto out;
}
@@ -1612,7 +1604,7 @@ static void e1000_diag_test(struct net_device *netdev,
forced_speed_duplex = adapter->hw.mac.forced_speed_duplex;
autoneg = adapter->hw.mac.autoneg;
- ndev_info(netdev, "offline testing starting\n");
+ e_info("offline testing starting\n");
/*
* Link test performed before hardware reset so autoneg doesn't
@@ -1658,7 +1650,7 @@ static void e1000_diag_test(struct net_device *netdev,
if (if_running)
dev_open(netdev);
} else {
- ndev_info(netdev, "online testing starting\n");
+ e_info("online testing starting\n");
/* Online tests */
if (e1000_link_test(adapter, &data[4]))
eth_test->flags |= ETH_TEST_FL_FAILED;
@@ -1694,8 +1686,8 @@ static void e1000_get_wol(struct net_device *netdev,
wol->supported &= ~WAKE_UCAST;
if (adapter->wol & E1000_WUFC_EX)
- ndev_err(netdev, "Interface does not support "
- "directed (unicast) frame wake-up packets\n");
+ e_err("Interface does not support directed (unicast) "
+ "frame wake-up packets\n");
}
if (adapter->wol & E1000_WUFC_EX)
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-05 12:32:44 +0000