summaryrefslogtreecommitdiffstats
path: root/drivers/net/e1000e/netdev.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/e1000e/netdev.c')
-rw-r--r--drivers/net/e1000e/netdev.c257
1 files changed, 116 insertions, 141 deletions
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 9c0f56b3c51..05b0b2f9c54 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -195,7 +195,7 @@ map_skb:
buffer_info->dma = pci_map_single(pdev, skb->data,
adapter->rx_buffer_len,
PCI_DMA_FROMDEVICE);
- if (pci_dma_mapping_error(buffer_info->dma)) {
+ if (pci_dma_mapping_error(pdev, buffer_info->dma)) {
dev_err(&pdev->dev, "RX DMA map failed\n");
adapter->rx_dma_failed++;
break;
@@ -265,7 +265,7 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
ps_page->page,
0, PAGE_SIZE,
PCI_DMA_FROMDEVICE);
- if (pci_dma_mapping_error(ps_page->dma)) {
+ if (pci_dma_mapping_error(pdev, ps_page->dma)) {
dev_err(&adapter->pdev->dev,
"RX DMA page map failed\n");
adapter->rx_dma_failed++;
@@ -300,7 +300,7 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
buffer_info->dma = pci_map_single(pdev, skb->data,
adapter->rx_ps_bsize0,
PCI_DMA_FROMDEVICE);
- if (pci_dma_mapping_error(buffer_info->dma)) {
+ if (pci_dma_mapping_error(pdev, buffer_info->dma)) {
dev_err(&pdev->dev, "RX DMA map failed\n");
adapter->rx_dma_failed++;
/* cleanup skb */
@@ -484,8 +484,8 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
* packet, also make sure the frame isn't just CRC only */
if (!(status & E1000_RXD_STAT_EOP) || (length <= 4)) {
/* All receives must fit into a single buffer */
- ndev_dbg(netdev, "%s: Receive packet consumed "
- "multiple buffers\n", netdev->name);
+ e_dbg("%s: Receive packet consumed multiple buffers\n",
+ netdev->name);
/* recycle */
buffer_info->skb = skb;
goto next_desc;
@@ -576,28 +576,26 @@ static void e1000_print_tx_hang(struct e1000_adapter *adapter)
unsigned int i = tx_ring->next_to_clean;
unsigned int eop = tx_ring->buffer_info[i].next_to_watch;
struct e1000_tx_desc *eop_desc = E1000_TX_DESC(*tx_ring, eop);
- struct net_device *netdev = adapter->netdev;
/* detected Tx unit hang */
- ndev_err(netdev,
- "Detected Tx Unit Hang:\n"
- " TDH <%x>\n"
- " TDT <%x>\n"
- " next_to_use <%x>\n"
- " next_to_clean <%x>\n"
- "buffer_info[next_to_clean]:\n"
- " time_stamp <%lx>\n"
- " next_to_watch <%x>\n"
- " jiffies <%lx>\n"
- " next_to_watch.status <%x>\n",
- readl(adapter->hw.hw_addr + tx_ring->head),
- readl(adapter->hw.hw_addr + tx_ring->tail),
- tx_ring->next_to_use,
- tx_ring->next_to_clean,
- tx_ring->buffer_info[eop].time_stamp,
- eop,
- jiffies,
- eop_desc->upper.fields.status);
+ e_err("Detected Tx Unit Hang:\n"
+ " TDH <%x>\n"
+ " TDT <%x>\n"
+ " next_to_use <%x>\n"
+ " next_to_clean <%x>\n"
+ "buffer_info[next_to_clean]:\n"
+ " time_stamp <%lx>\n"
+ " next_to_watch <%x>\n"
+ " jiffies <%lx>\n"
+ " next_to_watch.status <%x>\n",
+ readl(adapter->hw.hw_addr + tx_ring->head),
+ readl(adapter->hw.hw_addr + tx_ring->tail),
+ tx_ring->next_to_use,
+ tx_ring->next_to_clean,
+ tx_ring->buffer_info[eop].time_stamp,
+ eop,
+ jiffies,
+ eop_desc->upper.fields.status);
}
/**
@@ -747,8 +745,8 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
buffer_info->dma = 0;
if (!(staterr & E1000_RXD_STAT_EOP)) {
- ndev_dbg(netdev, "%s: Packet Split buffers didn't pick "
- "up the full packet\n", netdev->name);
+ e_dbg("%s: Packet Split buffers didn't pick up the "
+ "full packet\n", netdev->name);
dev_kfree_skb_irq(skb);
goto next_desc;
}
@@ -761,8 +759,8 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
length = le16_to_cpu(rx_desc->wb.middle.length0);
if (!length) {
- ndev_dbg(netdev, "%s: Last part of the packet spanning"
- " multiple descriptors\n", netdev->name);
+ e_dbg("%s: Last part of the packet spanning multiple "
+ "descriptors\n", netdev->name);
dev_kfree_skb_irq(skb);
goto next_desc;
}
@@ -1011,7 +1009,7 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
/* eth type trans needs skb->data to point to something */
if (!pskb_may_pull(skb, ETH_HLEN)) {
- ndev_err(netdev, "pskb_may_pull failed.\n");
+ e_err("pskb_may_pull failed.\n");
dev_kfree_skb(skb);
goto next_desc;
}
@@ -1251,10 +1249,8 @@ static int e1000_request_irq(struct e1000_adapter *adapter)
err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name,
netdev);
if (err) {
- ndev_err(netdev,
- "Unable to allocate %s interrupt (return: %d)\n",
- adapter->flags & FLAG_MSI_ENABLED ? "MSI":"INTx",
- err);
+ e_err("Unable to allocate %s interrupt (return: %d)\n",
+ adapter->flags & FLAG_MSI_ENABLED ? "MSI":"INTx", err);
if (adapter->flags & FLAG_MSI_ENABLED)
pci_disable_msi(adapter->pdev);
}
@@ -1395,8 +1391,7 @@ int e1000e_setup_tx_resources(struct e1000_adapter *adapter)
return 0;
err:
vfree(tx_ring->buffer_info);
- ndev_err(adapter->netdev,
- "Unable to allocate memory for the transmit descriptor ring\n");
+ e_err("Unable to allocate memory for the transmit descriptor ring\n");
return err;
}
@@ -1450,8 +1445,7 @@ err_pages:
}
err:
vfree(rx_ring->buffer_info);
- ndev_err(adapter->netdev,
- "Unable to allocate memory for the transmit descriptor ring\n");
+ e_err("Unable to allocate memory for the transmit descriptor ring\n");
return err;
}
@@ -2450,13 +2444,13 @@ void e1000e_reset(struct e1000_adapter *adapter)
* For parts with AMT enabled, let the firmware know
* that the network interface is in control
*/
- if ((adapter->flags & FLAG_HAS_AMT) && e1000e_check_mng_mode(hw))
+ if (adapter->flags & FLAG_HAS_AMT)
e1000_get_hw_control(adapter);
ew32(WUC, 0);
if (mac->ops.init_hw(hw))
- ndev_err(adapter->netdev, "Hardware Error\n");
+ e_err("Hardware Error\n");
e1000_update_mng_vlan(adapter);
@@ -2591,7 +2585,7 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
return 0;
err:
- ndev_err(netdev, "Unable to allocate memory for queues\n");
+ e_err("Unable to allocate memory for queues\n");
kfree(adapter->rx_ring);
kfree(adapter->tx_ring);
return -ENOMEM;
@@ -2640,8 +2634,7 @@ static int e1000_open(struct net_device *netdev)
* If AMT is enabled, let the firmware know that the network
* interface is now open
*/
- if ((adapter->flags & FLAG_HAS_AMT) &&
- e1000e_check_mng_mode(&adapter->hw))
+ if (adapter->flags & FLAG_HAS_AMT)
e1000_get_hw_control(adapter);
/*
@@ -2719,8 +2712,7 @@ static int e1000_close(struct net_device *netdev)
* If AMT is enabled, let the firmware know that the network
* interface is now closed
*/
- if ((adapter->flags & FLAG_HAS_AMT) &&
- e1000e_check_mng_mode(&adapter->hw))
+ if (adapter->flags & FLAG_HAS_AMT)
e1000_release_hw_control(adapter);
return 0;
@@ -2917,8 +2909,7 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter)
ret_val |= e1e_rphy(hw, PHY_1000T_STATUS, &phy->stat1000);
ret_val |= e1e_rphy(hw, PHY_EXT_STATUS, &phy->estatus);
if (ret_val)
- ndev_warn(adapter->netdev,
- "Error reading PHY register\n");
+ e_warn("Error reading PHY register\n");
} else {
/*
* Do not read PHY registers if link is not up
@@ -2943,18 +2934,16 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter)
static void e1000_print_link_info(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
- struct net_device *netdev = adapter->netdev;
u32 ctrl = er32(CTRL);
- ndev_info(netdev,
- "Link is Up %d Mbps %s, Flow Control: %s\n",
- adapter->link_speed,
- (adapter->link_duplex == FULL_DUPLEX) ?
- "Full Duplex" : "Half Duplex",
- ((ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE)) ?
- "RX/TX" :
- ((ctrl & E1000_CTRL_RFCE) ? "RX" :
- ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" )));
+ e_info("Link is Up %d Mbps %s, Flow Control: %s\n",
+ adapter->link_speed,
+ (adapter->link_duplex == FULL_DUPLEX) ?
+ "Full Duplex" : "Half Duplex",
+ ((ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE)) ?
+ "RX/TX" :
+ ((ctrl & E1000_CTRL_RFCE) ? "RX" :
+ ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" )));
}
static bool e1000_has_link(struct e1000_adapter *adapter)
@@ -2994,8 +2983,7 @@ static bool e1000_has_link(struct e1000_adapter *adapter)
if ((ret_val == E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) &&
(er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
/* See e1000_kmrn_lock_loss_workaround_ich8lan() */
- ndev_info(adapter->netdev,
- "Gigabit has been disabled, downgrading speed\n");
+ e_info("Gigabit has been disabled, downgrading speed\n");
}
return link_active;
@@ -3096,8 +3084,7 @@ static void e1000_watchdog_task(struct work_struct *work)
switch (adapter->link_speed) {
case SPEED_10:
case SPEED_100:
- ndev_info(netdev,
- "10/100 speed: disabling TSO\n");
+ e_info("10/100 speed: disabling TSO\n");
netdev->features &= ~NETIF_F_TSO;
netdev->features &= ~NETIF_F_TSO6;
break;
@@ -3130,7 +3117,7 @@ static void e1000_watchdog_task(struct work_struct *work)
if (netif_carrier_ok(netdev)) {
adapter->link_speed = 0;
adapter->link_duplex = 0;
- ndev_info(netdev, "Link is Down\n");
+ e_info("Link is Down\n");
netif_carrier_off(netdev);
netif_tx_stop_all_queues(netdev);
if (!test_bit(__E1000_DOWN, &adapter->state))
@@ -3344,7 +3331,7 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
skb->data + offset,
size,
PCI_DMA_TODEVICE);
- if (pci_dma_mapping_error(buffer_info->dma)) {
+ if (pci_dma_mapping_error(adapter->pdev, buffer_info->dma)) {
dev_err(&adapter->pdev->dev, "TX DMA map failed\n");
adapter->tx_dma_failed++;
return -1;
@@ -3382,7 +3369,8 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
offset,
size,
PCI_DMA_TODEVICE);
- if (pci_dma_mapping_error(buffer_info->dma)) {
+ if (pci_dma_mapping_error(adapter->pdev,
+ buffer_info->dma)) {
dev_err(&adapter->pdev->dev,
"TX DMA page map failed\n");
adapter->tx_dma_failed++;
@@ -3603,8 +3591,7 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
pull_size = min((unsigned int)4, skb->data_len);
if (!__pskb_pull_tail(skb, pull_size)) {
- ndev_err(netdev,
- "__pskb_pull_tail failed.\n");
+ e_err("__pskb_pull_tail failed.\n");
dev_kfree_skb_any(skb);
return NETDEV_TX_OK;
}
@@ -3736,25 +3723,25 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) ||
(max_frame > MAX_JUMBO_FRAME_SIZE)) {
- ndev_err(netdev, "Invalid MTU setting\n");
+ e_err("Invalid MTU setting\n");
return -EINVAL;
}
/* Jumbo frame size limits */
if (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) {
if (!(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
- ndev_err(netdev, "Jumbo Frames not supported.\n");
+ e_err("Jumbo Frames not supported.\n");
return -EINVAL;
}
if (adapter->hw.phy.type == e1000_phy_ife) {
- ndev_err(netdev, "Jumbo Frames not supported.\n");
+ e_err("Jumbo Frames not supported.\n");
return -EINVAL;
}
}
#define MAX_STD_JUMBO_FRAME_SIZE 9234
if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
- ndev_err(netdev, "MTU > 9216 not supported.\n");
+ e_err("MTU > 9216 not supported.\n");
return -EINVAL;
}
@@ -3791,8 +3778,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN
+ ETH_FCS_LEN;
- ndev_info(netdev, "changing MTU from %d to %d\n",
- netdev->mtu, new_mtu);
+ e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu);
netdev->mtu = new_mtu;
if (netif_running(netdev))
@@ -4005,10 +3991,7 @@ static int e1000_resume(struct pci_dev *pdev)
pci_restore_state(pdev);
e1000e_disable_l1aspm(pdev);
- if (adapter->need_ioport)
- err = pci_enable_device(pdev);
- else
- err = pci_enable_device_mem(pdev);
+ err = pci_enable_device_mem(pdev);
if (err) {
dev_err(&pdev->dev,
"Cannot enable PCI device from suspend\n");
@@ -4042,7 +4025,7 @@ static int e1000_resume(struct pci_dev *pdev)
* is up. For all other cases, let the f/w know that the h/w is now
* under the control of the driver.
*/
- if (!(adapter->flags & FLAG_HAS_AMT) || !e1000e_check_mng_mode(&adapter->hw))
+ if (!(adapter->flags & FLAG_HAS_AMT))
e1000_get_hw_control(adapter);
return 0;
@@ -4110,10 +4093,7 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
int err;
e1000e_disable_l1aspm(pdev);
- if (adapter->need_ioport)
- err = pci_enable_device(pdev);
- else
- err = pci_enable_device_mem(pdev);
+ err = pci_enable_device_mem(pdev);
if (err) {
dev_err(&pdev->dev,
"Cannot re-enable PCI device after reset.\n");
@@ -4161,8 +4141,7 @@ static void e1000_io_resume(struct pci_dev *pdev)
* is up. For all other cases, let the f/w know that the h/w is now
* under the control of the driver.
*/
- if (!(adapter->flags & FLAG_HAS_AMT) ||
- !e1000e_check_mng_mode(&adapter->hw))
+ if (!(adapter->flags & FLAG_HAS_AMT))
e1000_get_hw_control(adapter);
}
@@ -4174,36 +4153,40 @@ static void e1000_print_device_info(struct e1000_adapter *adapter)
u32 pba_num;
/* print bus type/speed/width info */
- ndev_info(netdev, "(PCI Express:2.5GB/s:%s) "
- "%02x:%02x:%02x:%02x:%02x:%02x\n",
- /* bus width */
- ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
- "Width x1"),
- /* MAC address */
- netdev->dev_addr[0], netdev->dev_addr[1],
- netdev->dev_addr[2], netdev->dev_addr[3],
- netdev->dev_addr[4], netdev->dev_addr[5]);
- ndev_info(netdev, "Intel(R) PRO/%s Network Connection\n",
- (hw->phy.type == e1000_phy_ife)
- ? "10/100" : "1000");
+ e_info("(PCI Express:2.5GB/s:%s) %02x:%02x:%02x:%02x:%02x:%02x\n",
+ /* bus width */
+ ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
+ "Width x1"),
+ /* MAC address */
+ netdev->dev_addr[0], netdev->dev_addr[1],
+ netdev->dev_addr[2], netdev->dev_addr[3],
+ netdev->dev_addr[4], netdev->dev_addr[5]);
+ e_info("Intel(R) PRO/%s Network Connection\n",
+ (hw->phy.type == e1000_phy_ife) ? "10/100" : "1000");
e1000e_read_pba_num(hw, &pba_num);
- ndev_info(netdev, "MAC: %d, PHY: %d, PBA No: %06x-%03x\n",
- hw->mac.type, hw->phy.type,
- (pba_num >> 8), (pba_num & 0xff));
+ e_info("MAC: %d, PHY: %d, PBA No: %06x-%03x\n",
+ hw->mac.type, hw->phy.type, (pba_num >> 8), (pba_num & 0xff));
}
-/**
- * e1000e_is_need_ioport - determine if an adapter needs ioport resources or not
- * @pdev: PCI device information struct
- *
- * Returns true if an adapters needs ioport resources
- **/
-static int e1000e_is_need_ioport(struct pci_dev *pdev)
+static void e1000_eeprom_checks(struct e1000_adapter *adapter)
{
- switch (pdev->device) {
- /* Currently there are no adapters that need ioport resources */
- default:
- return false;
+ struct e1000_hw *hw = &adapter->hw;
+ int ret_val;
+ u16 buf = 0;
+
+ if (hw->mac.type != e1000_82573)
+ return;
+
+ ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &buf);
+ if (!(le16_to_cpu(buf) & (1 << 0))) {
+ /* Deep Smart Power Down (DSPD) */
+ e_warn("Warning: detected DSPD enabled in EEPROM\n");
+ }
+
+ ret_val = e1000_read_nvm(hw, NVM_INIT_3GIO_3, 1, &buf);
+ if (le16_to_cpu(buf) & (3 << 2)) {
+ /* ASPM enable */
+ e_warn("Warning: detected ASPM enabled in EEPROM\n");
}
}
@@ -4232,19 +4215,10 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
int i, err, pci_using_dac;
u16 eeprom_data = 0;
u16 eeprom_apme_mask = E1000_EEPROM_APME;
- int bars, need_ioport;
e1000e_disable_l1aspm(pdev);
- /* do not allocate ioport bars when not needed */
- need_ioport = e1000e_is_need_ioport(pdev);
- if (need_ioport) {
- bars = pci_select_bars(pdev, IORESOURCE_MEM | IORESOURCE_IO);
- err = pci_enable_device(pdev);
- } else {
- bars = pci_select_bars(pdev, IORESOURCE_MEM);
- err = pci_enable_device_mem(pdev);
- }
+ err = pci_enable_device_mem(pdev);
if (err)
return err;
@@ -4267,7 +4241,9 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
}
}
- err = pci_request_selected_regions(pdev, bars, e1000e_driver_name);
+ err = pci_request_selected_regions(pdev,
+ pci_select_bars(pdev, IORESOURCE_MEM),
+ e1000e_driver_name);
if (err)
goto err_pci_reg;
@@ -4292,8 +4268,6 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
adapter->hw.adapter = adapter;
adapter->hw.mac.type = ei->mac;
adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1;
- adapter->bars = bars;
- adapter->need_ioport = need_ioport;
mmio_start = pci_resource_start(pdev, 0);
mmio_len = pci_resource_len(pdev, 0);
@@ -4365,8 +4339,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
}
if (e1000_check_reset_block(&adapter->hw))
- ndev_info(netdev,
- "PHY reset is blocked due to SOL/IDER session.\n");
+ e_info("PHY reset is blocked due to SOL/IDER session.\n");
netdev->features = NETIF_F_SG |
NETIF_F_HW_CSUM |
@@ -4410,25 +4383,26 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
if (e1000_validate_nvm_checksum(&adapter->hw) >= 0)
break;
if (i == 2) {
- ndev_err(netdev, "The NVM Checksum Is Not Valid\n");
+ e_err("The NVM Checksum Is Not Valid\n");
err = -EIO;
goto err_eeprom;
}
}
+ e1000_eeprom_checks(adapter);
+
/* copy the MAC address out of the NVM */
if (e1000e_read_mac_addr(&adapter->hw))
- ndev_err(netdev, "NVM Read Error while reading MAC address\n");
+ e_err("NVM Read Error while reading MAC address\n");
memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len);
memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len);
if (!is_valid_ether_addr(netdev->perm_addr)) {
- ndev_err(netdev, "Invalid MAC Address: "
- "%02x:%02x:%02x:%02x:%02x:%02x\n",
- netdev->perm_addr[0], netdev->perm_addr[1],
- netdev->perm_addr[2], netdev->perm_addr[3],
- netdev->perm_addr[4], netdev->perm_addr[5]);
+ e_err("Invalid MAC Address: %02x:%02x:%02x:%02x:%02x:%02x\n",
+ netdev->perm_addr[0], netdev->perm_addr[1],
+ netdev->perm_addr[2], netdev->perm_addr[3],
+ netdev->perm_addr[4], netdev->perm_addr[5]);
err = -EIO;
goto err_eeprom;
}
@@ -4498,8 +4472,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
* is up. For all other cases, let the f/w know that the h/w is now
* under the control of the driver.
*/
- if (!(adapter->flags & FLAG_HAS_AMT) ||
- !e1000e_check_mng_mode(&adapter->hw))
+ if (!(adapter->flags & FLAG_HAS_AMT))
e1000_get_hw_control(adapter);
/* tell the stack to leave us alone until e1000_open() is called */
@@ -4516,24 +4489,25 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
return 0;
err_register:
-err_hw_init:
- e1000_release_hw_control(adapter);
+ if (!(adapter->flags & FLAG_HAS_AMT))
+ e1000_release_hw_control(adapter);
err_eeprom:
if (!e1000_check_reset_block(&adapter->hw))
e1000_phy_hw_reset(&adapter->hw);
+err_hw_init:
- if (adapter->hw.flash_address)
- iounmap(adapter->hw.flash_address);
-
-err_flashmap:
kfree(adapter->tx_ring);
kfree(adapter->rx_ring);
err_sw_init:
+ if (adapter->hw.flash_address)
+ iounmap(adapter->hw.flash_address);
+err_flashmap:
iounmap(adapter->hw.hw_addr);
err_ioremap:
free_netdev(netdev);
err_alloc_etherdev:
- pci_release_selected_regions(pdev, bars);
+ pci_release_selected_regions(pdev,
+ pci_select_bars(pdev, IORESOURCE_MEM));
err_pci_reg:
err_dma:
pci_disable_device(pdev);
@@ -4581,7 +4555,8 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
iounmap(adapter->hw.hw_addr);
if (adapter->hw.flash_address)
iounmap(adapter->hw.flash_address);
- pci_release_selected_regions(pdev, adapter->bars);
+ pci_release_selected_regions(pdev,
+ pci_select_bars(pdev, IORESOURCE_MEM));
free_netdev(netdev);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-05 12:24:26 +0000