summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/altera/altera_sgdmahw.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/altera/altera_sgdmahw.h')
-rw-r--r--drivers/net/ethernet/altera/altera_sgdmahw.h124
1 files changed, 124 insertions, 0 deletions
diff --git a/drivers/net/ethernet/altera/altera_sgdmahw.h b/drivers/net/ethernet/altera/altera_sgdmahw.h
new file mode 100644
index 00000000000..ba3334f3538
--- /dev/null
+++ b/drivers/net/ethernet/altera/altera_sgdmahw.h
@@ -0,0 +1,124 @@
+/* Altera TSE SGDMA and MSGDMA Linux driver
+ * Copyright (C) 2014 Altera Corporation. All rights reserved
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ALTERA_SGDMAHW_H__
+#define __ALTERA_SGDMAHW_H__
+
+/* SGDMA descriptor structure */
+struct sgdma_descrip {
+ unsigned int raddr; /* address of data to be read */
+ unsigned int pad1;
+ unsigned int waddr;
+ unsigned int pad2;
+ unsigned int next;
+ unsigned int pad3;
+ unsigned short bytes;
+ unsigned char rburst;
+ unsigned char wburst;
+ unsigned short bytes_xferred; /* 16 bits, bytes xferred */
+
+ /* bit 0: error
+ * bit 1: length error
+ * bit 2: crc error
+ * bit 3: truncated error
+ * bit 4: phy error
+ * bit 5: collision error
+ * bit 6: reserved
+ * bit 7: status eop for recv case
+ */
+ unsigned char status;
+
+ /* bit 0: eop
+ * bit 1: read_fixed
+ * bit 2: write fixed
+ * bits 3,4,5,6: Channel (always 0)
+ * bit 7: hardware owned
+ */
+ unsigned char control;
+} __packed;
+
+
+#define SGDMA_STATUS_ERR BIT(0)
+#define SGDMA_STATUS_LENGTH_ERR BIT(1)
+#define SGDMA_STATUS_CRC_ERR BIT(2)
+#define SGDMA_STATUS_TRUNC_ERR BIT(3)
+#define SGDMA_STATUS_PHY_ERR BIT(4)
+#define SGDMA_STATUS_COLL_ERR BIT(5)
+#define SGDMA_STATUS_EOP BIT(7)
+
+#define SGDMA_CONTROL_EOP BIT(0)
+#define SGDMA_CONTROL_RD_FIXED BIT(1)
+#define SGDMA_CONTROL_WR_FIXED BIT(2)
+
+/* Channel is always 0, so just zero initialize it */
+
+#define SGDMA_CONTROL_HW_OWNED BIT(7)
+
+/* SGDMA register space */
+struct sgdma_csr {
+ /* bit 0: error
+ * bit 1: eop
+ * bit 2: descriptor completed
+ * bit 3: chain completed
+ * bit 4: busy
+ * remainder reserved
+ */
+ u32 status;
+ u32 pad1[3];
+
+ /* bit 0: interrupt on error
+ * bit 1: interrupt on eop
+ * bit 2: interrupt after every descriptor
+ * bit 3: interrupt after last descrip in a chain
+ * bit 4: global interrupt enable
+ * bit 5: starts descriptor processing
+ * bit 6: stop core on dma error
+ * bit 7: interrupt on max descriptors
+ * bits 8-15: max descriptors to generate interrupt
+ * bit 16: Software reset
+ * bit 17: clears owned by hardware if 0, does not clear otherwise
+ * bit 18: enables descriptor polling mode
+ * bit 19-26: clocks before polling again
+ * bit 27-30: reserved
+ * bit 31: clear interrupt
+ */
+ u32 control;
+ u32 pad2[3];
+ u32 next_descrip;
+ u32 pad3[3];
+};
+
+
+#define SGDMA_STSREG_ERR BIT(0) /* Error */
+#define SGDMA_STSREG_EOP BIT(1) /* EOP */
+#define SGDMA_STSREG_DESCRIP BIT(2) /* Descriptor completed */
+#define SGDMA_STSREG_CHAIN BIT(3) /* Chain completed */
+#define SGDMA_STSREG_BUSY BIT(4) /* Controller busy */
+
+#define SGDMA_CTRLREG_IOE BIT(0) /* Interrupt on error */
+#define SGDMA_CTRLREG_IOEOP BIT(1) /* Interrupt on EOP */
+#define SGDMA_CTRLREG_IDESCRIP BIT(2) /* Interrupt after every descriptor */
+#define SGDMA_CTRLREG_ILASTD BIT(3) /* Interrupt after last descriptor */
+#define SGDMA_CTRLREG_INTEN BIT(4) /* Global Interrupt enable */
+#define SGDMA_CTRLREG_START BIT(5) /* starts descriptor processing */
+#define SGDMA_CTRLREG_STOPERR BIT(6) /* stop on dma error */
+#define SGDMA_CTRLREG_INTMAX BIT(7) /* Interrupt on max descriptors */
+#define SGDMA_CTRLREG_RESET BIT(16)/* Software reset */
+#define SGDMA_CTRLREG_COBHW BIT(17)/* Clears owned by hardware */
+#define SGDMA_CTRLREG_POLL BIT(18)/* enables descriptor polling mode */
+#define SGDMA_CTRLREG_CLRINT BIT(31)/* Clears interrupt */
+
+#endif /* __ALTERA_SGDMAHW_H__ */