diff options
Diffstat (limited to 'drivers/net/ethernet/intel/e1000')
| -rw-r--r-- | drivers/net/ethernet/intel/e1000/e1000_ethtool.c | 3 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000/e1000_hw.c | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000/e1000_main.c | 21 |
3 files changed, 12 insertions, 14 deletions
diff --git a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c index d50f78afb56..cca5bca44e7 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c +++ b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c @@ -1316,7 +1316,6 @@ static int e1000_set_phy_loopback(struct e1000_adapter *adapter) case e1000_82547: case e1000_82547_rev_2: return e1000_integrated_phy_loopback(adapter); - break; default: /* Default PHY loopback work is to read the MII * control register and assert bit 14 (loopback mode). @@ -1325,7 +1324,6 @@ static int e1000_set_phy_loopback(struct e1000_adapter *adapter) phy_reg |= MII_CR_LOOPBACK; e1000_write_phy_reg(hw, PHY_CTRL, phy_reg); return 0; - break; } return 8; @@ -1344,7 +1342,6 @@ static int e1000_setup_loopback_test(struct e1000_adapter *adapter) case e1000_82545_rev_3: case e1000_82546_rev_3: return e1000_set_phy_loopback(adapter); - break; default: rctl = er32(RCTL); rctl |= E1000_RCTL_LBM_TCVR; diff --git a/drivers/net/ethernet/intel/e1000/e1000_hw.c b/drivers/net/ethernet/intel/e1000/e1000_hw.c index e9b07ccc0eb..1acf5034db1 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_hw.c +++ b/drivers/net/ethernet/intel/e1000/e1000_hw.c @@ -902,7 +902,6 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw) default: e_dbg("Flow control param set incorrectly\n"); return -E1000_ERR_CONFIG; - break; } /* Since auto-negotiation is enabled, take the link out of reset (the @@ -5041,7 +5040,6 @@ static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length, break; default: return -E1000_ERR_PHY; - break; } } else if (hw->phy_type == e1000_phy_igp) { /* For IGP PHY */ u16 cur_agc_value; diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c index 660971f304b..ad3d5d12173 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_main.c +++ b/drivers/net/ethernet/intel/e1000/e1000_main.c @@ -46,7 +46,7 @@ static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation * Macro expands to... * {PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)} */ -static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = { +static const struct pci_device_id e1000_pci_tbl[] = { INTEL_E1000_ETHERNET_DEVICE(0x1000), INTEL_E1000_ETHERNET_DEVICE(0x1001), INTEL_E1000_ETHERNET_DEVICE(0x1004), @@ -2674,7 +2674,8 @@ set_itr_now: #define E1000_TX_FLAGS_VLAN_SHIFT 16 static int e1000_tso(struct e1000_adapter *adapter, - struct e1000_tx_ring *tx_ring, struct sk_buff *skb) + struct e1000_tx_ring *tx_ring, struct sk_buff *skb, + __be16 protocol) { struct e1000_context_desc *context_desc; struct e1000_buffer *buffer_info; @@ -2692,7 +2693,7 @@ static int e1000_tso(struct e1000_adapter *adapter, hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); mss = skb_shinfo(skb)->gso_size; - if (skb->protocol == htons(ETH_P_IP)) { + if (protocol == htons(ETH_P_IP)) { struct iphdr *iph = ip_hdr(skb); iph->tot_len = 0; iph->check = 0; @@ -2702,7 +2703,7 @@ static int e1000_tso(struct e1000_adapter *adapter, 0); cmd_length = E1000_TXD_CMD_IP; ipcse = skb_transport_offset(skb) - 1; - } else if (skb->protocol == htons(ETH_P_IPV6)) { + } else if (skb_is_gso_v6(skb)) { ipv6_hdr(skb)->payload_len = 0; tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, @@ -2745,7 +2746,8 @@ static int e1000_tso(struct e1000_adapter *adapter, } static bool e1000_tx_csum(struct e1000_adapter *adapter, - struct e1000_tx_ring *tx_ring, struct sk_buff *skb) + struct e1000_tx_ring *tx_ring, struct sk_buff *skb, + __be16 protocol) { struct e1000_context_desc *context_desc; struct e1000_buffer *buffer_info; @@ -2756,7 +2758,7 @@ static bool e1000_tx_csum(struct e1000_adapter *adapter, if (skb->ip_summed != CHECKSUM_PARTIAL) return false; - switch (skb->protocol) { + switch (protocol) { case cpu_to_be16(ETH_P_IP): if (ip_hdr(skb)->protocol == IPPROTO_TCP) cmd_len |= E1000_TXD_CMD_TCP; @@ -3097,6 +3099,7 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, int count = 0; int tso; unsigned int f; + __be16 protocol = vlan_get_protocol(skb); /* This goes back to the question of how to logically map a Tx queue * to a flow. Right now, performance is impacted slightly negatively @@ -3210,7 +3213,7 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, first = tx_ring->next_to_use; - tso = e1000_tso(adapter, tx_ring, skb); + tso = e1000_tso(adapter, tx_ring, skb, protocol); if (tso < 0) { dev_kfree_skb_any(skb); return NETDEV_TX_OK; @@ -3220,10 +3223,10 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, if (likely(hw->mac_type != e1000_82544)) tx_ring->last_tx_tso = true; tx_flags |= E1000_TX_FLAGS_TSO; - } else if (likely(e1000_tx_csum(adapter, tx_ring, skb))) + } else if (likely(e1000_tx_csum(adapter, tx_ring, skb, protocol))) tx_flags |= E1000_TX_FLAGS_CSUM; - if (likely(skb->protocol == htons(ETH_P_IP))) + if (protocol == htons(ETH_P_IP)) tx_flags |= E1000_TX_FLAGS_IPV4; if (unlikely(skb->no_fcs)) |