summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/e1000e/ich8lan.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e/ich8lan.c')
-rw-r--r--drivers/net/ethernet/intel/e1000e/ich8lan.c21
1 files changed, 17 insertions, 4 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 8894ab8ed6b..48b74a54915 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -572,7 +572,6 @@ static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw)
break;
default:
return -E1000_ERR_PHY;
- break;
}
return 0;
@@ -2445,7 +2444,7 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable)
return ret_val;
e1e_rphy(hw, PHY_REG(776, 20), &data);
data &= ~(0x3FF << 2);
- data |= (0x1A << 2);
+ data |= (E1000_TX_PTR_GAP << 2);
ret_val = e1e_wphy(hw, PHY_REG(776, 20), data);
if (ret_val)
return ret_val;
@@ -4606,14 +4605,23 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw)
/* Disable LPLU if both link partners support 100BaseT
* EEE and 100Full is advertised on both ends of the
- * link.
+ * link, and enable Auto Enable LPI since there will
+ * be no driver to enable LPI while in Sx.
*/
if ((eee_advert & I82579_EEE_100_SUPPORTED) &&
(dev_spec->eee_lp_ability &
I82579_EEE_100_SUPPORTED) &&
- (hw->phy.autoneg_advertised & ADVERTISE_100_FULL))
+ (hw->phy.autoneg_advertised & ADVERTISE_100_FULL)) {
phy_ctrl &= ~(E1000_PHY_CTRL_D0A_LPLU |
E1000_PHY_CTRL_NOND0A_LPLU);
+
+ /* Set Auto Enable LPI after link up */
+ e1e_rphy_locked(hw,
+ I217_LPI_GPIO_CTRL, &phy_reg);
+ phy_reg |= I217_LPI_GPIO_CTRL_AUTO_EN_LPI;
+ e1e_wphy_locked(hw,
+ I217_LPI_GPIO_CTRL, phy_reg);
+ }
}
/* For i217 Intel Rapid Start Technology support,
@@ -4710,6 +4718,11 @@ void e1000_resume_workarounds_pchlan(struct e1000_hw *hw)
return;
}
+ /* Clear Auto Enable LPI after link up */
+ e1e_rphy_locked(hw, I217_LPI_GPIO_CTRL, &phy_reg);
+ phy_reg &= ~I217_LPI_GPIO_CTRL_AUTO_EN_LPI;
+ e1e_wphy_locked(hw, I217_LPI_GPIO_CTRL, phy_reg);
+
if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) {
/* Restore clear on SMB if no manageability engine
* is present