diff options
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e/netdev.c')
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/netdev.c | 76 |
1 files changed, 57 insertions, 19 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 201cc93f362..247335d2c7e 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -5164,7 +5164,8 @@ link_up: #define E1000_TX_FLAGS_VLAN_MASK 0xffff0000 #define E1000_TX_FLAGS_VLAN_SHIFT 16 -static int e1000_tso(struct e1000_ring *tx_ring, struct sk_buff *skb) +static int e1000_tso(struct e1000_ring *tx_ring, struct sk_buff *skb, + __be16 protocol) { struct e1000_context_desc *context_desc; struct e1000_buffer *buffer_info; @@ -5183,7 +5184,7 @@ static int e1000_tso(struct e1000_ring *tx_ring, struct sk_buff *skb) hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); mss = skb_shinfo(skb)->gso_size; - if (skb->protocol == htons(ETH_P_IP)) { + if (protocol == htons(ETH_P_IP)) { struct iphdr *iph = ip_hdr(skb); iph->tot_len = 0; iph->check = 0; @@ -5231,7 +5232,8 @@ static int e1000_tso(struct e1000_ring *tx_ring, struct sk_buff *skb) return 1; } -static bool e1000_tx_csum(struct e1000_ring *tx_ring, struct sk_buff *skb) +static bool e1000_tx_csum(struct e1000_ring *tx_ring, struct sk_buff *skb, + __be16 protocol) { struct e1000_adapter *adapter = tx_ring->adapter; struct e1000_context_desc *context_desc; @@ -5239,16 +5241,10 @@ static bool e1000_tx_csum(struct e1000_ring *tx_ring, struct sk_buff *skb) unsigned int i; u8 css; u32 cmd_len = E1000_TXD_CMD_DEXT; - __be16 protocol; if (skb->ip_summed != CHECKSUM_PARTIAL) return false; - if (skb->protocol == cpu_to_be16(ETH_P_8021Q)) - protocol = vlan_eth_hdr(skb)->h_vlan_encapsulated_proto; - else - protocol = skb->protocol; - switch (protocol) { case cpu_to_be16(ETH_P_IP): if (ip_hdr(skb)->protocol == IPPROTO_TCP) @@ -5546,6 +5542,7 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, int count = 0; int tso; unsigned int f; + __be16 protocol = vlan_get_protocol(skb); if (test_bit(__E1000_DOWN, &adapter->state)) { dev_kfree_skb_any(skb); @@ -5620,7 +5617,7 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, first = tx_ring->next_to_use; - tso = e1000_tso(tx_ring, skb); + tso = e1000_tso(tx_ring, skb, protocol); if (tso < 0) { dev_kfree_skb_any(skb); return NETDEV_TX_OK; @@ -5628,14 +5625,14 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, if (tso) tx_flags |= E1000_TX_FLAGS_TSO; - else if (e1000_tx_csum(tx_ring, skb)) + else if (e1000_tx_csum(tx_ring, skb, protocol)) tx_flags |= E1000_TX_FLAGS_CSUM; /* Old method was to assume IPv4 packet by default if TSO was enabled. * 82571 hardware supports TSO capabilities for IPv6 as well... * no longer assume, we must. */ - if (skb->protocol == htons(ETH_P_IP)) + if (protocol == htons(ETH_P_IP)) tx_flags |= E1000_TX_FLAGS_IPV4; if (unlikely(skb->no_fcs)) @@ -6033,6 +6030,28 @@ release: return retval; } +static void e1000e_flush_lpic(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 ret_val; + + pm_runtime_get_sync(netdev->dev.parent); + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + goto fl_out; + + pr_info("EEE TX LPI TIMER: %08X\n", + er32(LPIC) >> E1000_LPIC_LPIET_SHIFT); + + hw->phy.ops.release(hw); + +fl_out: + pm_runtime_put_sync(netdev->dev.parent); +} + static int e1000e_pm_freeze(struct device *dev) { struct net_device *netdev = pci_get_drvdata(to_pci_dev(dev)); @@ -6333,6 +6352,8 @@ static int e1000e_pm_suspend(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); + e1000e_flush_lpic(pdev); + e1000e_pm_freeze(dev); return __e1000_shutdown(pdev, false); @@ -6357,9 +6378,14 @@ static int e1000e_pm_runtime_idle(struct device *dev) struct pci_dev *pdev = to_pci_dev(dev); struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); + u16 eee_lp; + + eee_lp = adapter->hw.dev_spec.ich8lan.eee_lp_ability; - if (!e1000e_has_link(adapter)) + if (!e1000e_has_link(adapter)) { + adapter->hw.dev_spec.ich8lan.eee_lp_ability = eee_lp; pm_schedule_suspend(dev, 5 * MSEC_PER_SEC); + } return -EBUSY; } @@ -6411,6 +6437,8 @@ static int e1000e_pm_runtime_suspend(struct device *dev) static void e1000_shutdown(struct pci_dev *pdev) { + e1000e_flush_lpic(pdev); + e1000e_pm_freeze(&pdev->dev); __e1000_shutdown(pdev, false); @@ -6708,6 +6736,7 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) int bars, i, err, pci_using_dac; u16 eeprom_data = 0; u16 eeprom_apme_mask = E1000_EEPROM_APME; + s32 rval = 0; if (ei->flags2 & FLAG2_DISABLE_ASPM_L0S) aspm_disable_flag = PCIE_LINK_STATE_L0S; @@ -6940,15 +6969,19 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } else if (adapter->flags & FLAG_APME_IN_CTRL3) { if (adapter->flags & FLAG_APME_CHECK_PORT_B && (adapter->hw.bus.func == 1)) - e1000_read_nvm(&adapter->hw, NVM_INIT_CONTROL3_PORT_B, - 1, &eeprom_data); + rval = e1000_read_nvm(&adapter->hw, + NVM_INIT_CONTROL3_PORT_B, + 1, &eeprom_data); else - e1000_read_nvm(&adapter->hw, NVM_INIT_CONTROL3_PORT_A, - 1, &eeprom_data); + rval = e1000_read_nvm(&adapter->hw, + NVM_INIT_CONTROL3_PORT_A, + 1, &eeprom_data); } /* fetch WoL from EEPROM */ - if (eeprom_data & eeprom_apme_mask) + if (rval) + e_dbg("NVM read error getting WoL initial values: %d\n", rval); + else if (eeprom_data & eeprom_apme_mask) adapter->eeprom_wol |= E1000_WUFC_MAG; /* now that we have the eeprom settings, apply the special cases @@ -6967,7 +7000,12 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) device_wakeup_enable(&pdev->dev); /* save off EEPROM version number */ - e1000_read_nvm(&adapter->hw, 5, 1, &adapter->eeprom_vers); + rval = e1000_read_nvm(&adapter->hw, 5, 1, &adapter->eeprom_vers); + + if (rval) { + e_dbg("NVM read error getting EEPROM version: %d\n", rval); + adapter->eeprom_vers = 0; + } /* reset the hardware with the new settings */ e1000e_reset(adapter); |