diff options
Diffstat (limited to 'drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c')
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c | 92 |
1 files changed, 35 insertions, 57 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c index 85d2e2c4ce4..42537336110 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c @@ -91,29 +91,6 @@ out: IXGBE_WRITE_REG(hw, IXGBE_GCR, gcr); } -/** - * ixgbe_get_pcie_msix_count_82598 - Gets MSI-X vector count - * @hw: pointer to hardware structure - * - * Read PCIe configuration space, and get the MSI-X vector count from - * the capabilities table. - **/ -static u16 ixgbe_get_pcie_msix_count_82598(struct ixgbe_hw *hw) -{ - struct ixgbe_adapter *adapter = hw->back; - u16 msix_count; - pci_read_config_word(adapter->pdev, IXGBE_PCIE_MSIX_82598_CAPS, - &msix_count); - msix_count &= IXGBE_PCIE_MSIX_TBL_SZ_MASK; - - /* MSI-X count is zero-based in HW, so increment to give proper value */ - msix_count++; - - return msix_count; -} - -/** - */ static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw) { struct ixgbe_mac_info *mac = &hw->mac; @@ -126,7 +103,7 @@ static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw) mac->num_rar_entries = IXGBE_82598_RAR_ENTRIES; mac->max_rx_queues = IXGBE_82598_MAX_RX_QUEUES; mac->max_tx_queues = IXGBE_82598_MAX_TX_QUEUES; - mac->max_msix_vectors = ixgbe_get_pcie_msix_count_82598(hw); + mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw); return 0; } @@ -347,24 +324,33 @@ out: /** * ixgbe_fc_enable_82598 - Enable flow control * @hw: pointer to hardware structure - * @packetbuf_num: packet buffer number (0-7) * * Enable flow control according to the current settings. **/ -static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw, s32 packetbuf_num) +static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw) { s32 ret_val = 0; u32 fctrl_reg; u32 rmcs_reg; u32 reg; + u32 fcrtl, fcrth; u32 link_speed = 0; + int i; bool link_up; -#ifdef CONFIG_DCB - if (hw->fc.requested_mode == ixgbe_fc_pfc) + /* + * Validate the water mark configuration for packet buffer 0. Zero + * water marks indicate that the packet buffer was not configured + * and the watermarks for packet buffer 0 should always be configured. + */ + if (!hw->fc.low_water || + !hw->fc.high_water[0] || + !hw->fc.pause_time) { + hw_dbg(hw, "Invalid water mark configuration\n"); + ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS; goto out; + } -#endif /* CONFIG_DCB */ /* * On 82598 having Rx FC on causes resets while doing 1G * so if it's on turn it off once we know link_speed. For @@ -386,9 +372,7 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw, s32 packetbuf_num) } /* Negotiate the fc mode to use */ - ret_val = ixgbe_fc_autoneg(hw); - if (ret_val == IXGBE_ERR_FLOW_CONTROL) - goto out; + ixgbe_fc_autoneg(hw); /* Disable any previous flow control settings */ fctrl_reg = IXGBE_READ_REG(hw, IXGBE_FCTRL); @@ -405,9 +389,6 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw, s32 packetbuf_num) * 2: Tx flow control is enabled (we can send pause frames but * we do not support receiving pause frames). * 3: Both Rx and Tx flow control (symmetric) are enabled. -#ifdef CONFIG_DCB - * 4: Priority Flow Control is enabled. -#endif * other: Invalid. */ switch (hw->fc.current_mode) { @@ -440,11 +421,6 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw, s32 packetbuf_num) fctrl_reg |= IXGBE_FCTRL_RFCE; rmcs_reg |= IXGBE_RMCS_TFCE_802_3X; break; -#ifdef CONFIG_DCB - case ixgbe_fc_pfc: - goto out; - break; -#endif /* CONFIG_DCB */ default: hw_dbg(hw, "Flow control param set incorrectly\n"); ret_val = IXGBE_ERR_CONFIG; @@ -457,29 +433,29 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw, s32 packetbuf_num) IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl_reg); IXGBE_WRITE_REG(hw, IXGBE_RMCS, rmcs_reg); - /* Set up and enable Rx high/low water mark thresholds, enable XON. */ - if (hw->fc.current_mode & ixgbe_fc_tx_pause) { - reg = hw->fc.low_water << 6; - if (hw->fc.send_xon) - reg |= IXGBE_FCRTL_XONE; - - IXGBE_WRITE_REG(hw, IXGBE_FCRTL(packetbuf_num), reg); + fcrtl = (hw->fc.low_water << 10) | IXGBE_FCRTL_XONE; - reg = hw->fc.high_water[packetbuf_num] << 6; - reg |= IXGBE_FCRTH_FCEN; + /* Set up and enable Rx high/low water mark thresholds, enable XON. */ + for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { + if ((hw->fc.current_mode & ixgbe_fc_tx_pause) && + hw->fc.high_water[i]) { + fcrth = (hw->fc.high_water[i] << 10) | IXGBE_FCRTH_FCEN; + IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), fcrtl); + IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), fcrth); + } else { + IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), 0); + IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), 0); + } - IXGBE_WRITE_REG(hw, IXGBE_FCRTH(packetbuf_num), reg); } /* Configure pause time (2 TCs per register) */ - reg = IXGBE_READ_REG(hw, IXGBE_FCTTV(packetbuf_num / 2)); - if ((packetbuf_num & 1) == 0) - reg = (reg & 0xFFFF0000) | hw->fc.pause_time; - else - reg = (reg & 0x0000FFFF) | (hw->fc.pause_time << 16); - IXGBE_WRITE_REG(hw, IXGBE_FCTTV(packetbuf_num / 2), reg); + reg = hw->fc.pause_time * 0x00010001; + for (i = 0; i < (MAX_TRAFFIC_CLASS / 2); i++) + IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg); - IXGBE_WRITE_REG(hw, IXGBE_FCRTV, (hw->fc.pause_time >> 1)); + /* Configure flow control refresh threshold value */ + IXGBE_WRITE_REG(hw, IXGBE_FCRTV, hw->fc.pause_time / 2); out: return ret_val; @@ -1300,6 +1276,8 @@ static struct ixgbe_mac_operations mac_ops_82598 = { .set_fw_drv_ver = NULL, .acquire_swfw_sync = &ixgbe_acquire_swfw_sync, .release_swfw_sync = &ixgbe_release_swfw_sync, + .get_thermal_sensor_data = NULL, + .init_thermal_sensor_thresh = NULL, }; static struct ixgbe_eeprom_operations eeprom_ops_82598 = { |