diff options
Diffstat (limited to 'drivers/net/ethernet/sfc/efx.c')
| -rw-r--r-- | drivers/net/ethernet/sfc/efx.c | 267 |
1 files changed, 224 insertions, 43 deletions
diff --git a/drivers/net/ethernet/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c index 0bc00991d31..01b99206139 100644 --- a/drivers/net/ethernet/sfc/efx.c +++ b/drivers/net/ethernet/sfc/efx.c @@ -22,6 +22,7 @@ #include <linux/topology.h> #include <linux/gfp.h> #include <linux/cpu_rmap.h> +#include <linux/aer.h> #include "net_driver.h" #include "efx.h" #include "nic.h" @@ -71,21 +72,21 @@ const char *const efx_loopback_mode_names[] = { const unsigned int efx_reset_type_max = RESET_TYPE_MAX; const char *const efx_reset_type_names[] = { - [RESET_TYPE_INVISIBLE] = "INVISIBLE", - [RESET_TYPE_ALL] = "ALL", - [RESET_TYPE_WORLD] = "WORLD", - [RESET_TYPE_DISABLE] = "DISABLE", - [RESET_TYPE_TX_WATCHDOG] = "TX_WATCHDOG", - [RESET_TYPE_INT_ERROR] = "INT_ERROR", - [RESET_TYPE_RX_RECOVERY] = "RX_RECOVERY", - [RESET_TYPE_RX_DESC_FETCH] = "RX_DESC_FETCH", - [RESET_TYPE_TX_DESC_FETCH] = "TX_DESC_FETCH", - [RESET_TYPE_TX_SKIP] = "TX_SKIP", - [RESET_TYPE_MC_FAILURE] = "MC_FAILURE", + [RESET_TYPE_INVISIBLE] = "INVISIBLE", + [RESET_TYPE_ALL] = "ALL", + [RESET_TYPE_RECOVER_OR_ALL] = "RECOVER_OR_ALL", + [RESET_TYPE_WORLD] = "WORLD", + [RESET_TYPE_RECOVER_OR_DISABLE] = "RECOVER_OR_DISABLE", + [RESET_TYPE_DISABLE] = "DISABLE", + [RESET_TYPE_TX_WATCHDOG] = "TX_WATCHDOG", + [RESET_TYPE_INT_ERROR] = "INT_ERROR", + [RESET_TYPE_RX_RECOVERY] = "RX_RECOVERY", + [RESET_TYPE_RX_DESC_FETCH] = "RX_DESC_FETCH", + [RESET_TYPE_TX_DESC_FETCH] = "TX_DESC_FETCH", + [RESET_TYPE_TX_SKIP] = "TX_SKIP", + [RESET_TYPE_MC_FAILURE] = "MC_FAILURE", }; -#define EFX_MAX_MTU (9 * 1024) - /* Reset workqueue. If any NIC has a hardware failure then a reset will be * queued onto this work queue. This is not a per-nic work queue, because * efx_reset_work() acquires the rtnl lock, so resets are naturally serialised. @@ -117,9 +118,12 @@ MODULE_PARM_DESC(separate_tx_channels, static int napi_weight = 64; /* This is the time (in jiffies) between invocations of the hardware - * monitor. On Falcon-based NICs, this will: + * monitor. + * On Falcon-based NICs, this will: * - Check the on-board hardware monitor; * - Poll the link state and reconfigure the hardware as necessary. + * On Siena-based NICs for power systems with EEH support, this will give EEH a + * chance to start. */ static unsigned int efx_monitor_interval = 1 * HZ; @@ -203,13 +207,14 @@ static void efx_stop_all(struct efx_nic *efx); #define EFX_ASSERT_RESET_SERIALISED(efx) \ do { \ if ((efx->state == STATE_READY) || \ + (efx->state == STATE_RECOVERY) || \ (efx->state == STATE_DISABLED)) \ ASSERT_RTNL(); \ } while (0) static int efx_check_disabled(struct efx_nic *efx) { - if (efx->state == STATE_DISABLED) { + if (efx->state == STATE_DISABLED || efx->state == STATE_RECOVERY) { netif_err(efx, drv, efx->net_dev, "device is disabled due to earlier errors\n"); return -EIO; @@ -242,15 +247,9 @@ static int efx_process_channel(struct efx_channel *channel, int budget) struct efx_rx_queue *rx_queue = efx_channel_get_rx_queue(channel); - /* Deliver last RX packet. */ - if (channel->rx_pkt) { - __efx_rx_packet(channel, channel->rx_pkt); - channel->rx_pkt = NULL; - } - if (rx_queue->enabled) { - efx_rx_strategy(channel); + efx_rx_flush_packet(channel); + if (rx_queue->enabled) efx_fast_push_rx_descriptors(rx_queue); - } } return spent; @@ -625,20 +624,51 @@ fail: */ static void efx_start_datapath(struct efx_nic *efx) { + bool old_rx_scatter = efx->rx_scatter; struct efx_tx_queue *tx_queue; struct efx_rx_queue *rx_queue; struct efx_channel *channel; + size_t rx_buf_len; /* Calculate the rx buffer allocation parameters required to * support the current MTU, including padding for header * alignment and overruns. */ - efx->rx_buffer_len = (max(EFX_PAGE_IP_ALIGN, NET_IP_ALIGN) + - EFX_MAX_FRAME_LEN(efx->net_dev->mtu) + - efx->type->rx_buffer_hash_size + - efx->type->rx_buffer_padding); - efx->rx_buffer_order = get_order(efx->rx_buffer_len + - sizeof(struct efx_rx_page_state)); + efx->rx_dma_len = (efx->type->rx_buffer_hash_size + + EFX_MAX_FRAME_LEN(efx->net_dev->mtu) + + efx->type->rx_buffer_padding); + rx_buf_len = (sizeof(struct efx_rx_page_state) + + EFX_PAGE_IP_ALIGN + efx->rx_dma_len); + if (rx_buf_len <= PAGE_SIZE) { + efx->rx_scatter = false; + efx->rx_buffer_order = 0; + } else if (efx->type->can_rx_scatter) { + BUILD_BUG_ON(sizeof(struct efx_rx_page_state) + + EFX_PAGE_IP_ALIGN + EFX_RX_USR_BUF_SIZE > + PAGE_SIZE / 2); + efx->rx_scatter = true; + efx->rx_dma_len = EFX_RX_USR_BUF_SIZE; + efx->rx_buffer_order = 0; + } else { + efx->rx_scatter = false; + efx->rx_buffer_order = get_order(rx_buf_len); + } + + efx_rx_config_page_split(efx); + if (efx->rx_buffer_order) + netif_dbg(efx, drv, efx->net_dev, + "RX buf len=%u; page order=%u batch=%u\n", + efx->rx_dma_len, efx->rx_buffer_order, + efx->rx_pages_per_batch); + else + netif_dbg(efx, drv, efx->net_dev, + "RX buf len=%u step=%u bpp=%u; page batch=%u\n", + efx->rx_dma_len, efx->rx_page_buf_step, + efx->rx_bufs_per_page, efx->rx_pages_per_batch); + + /* RX filters also have scatter-enabled flags */ + if (efx->rx_scatter != old_rx_scatter) + efx_filter_update_rx_scatter(efx); /* We must keep at least one descriptor in a TX ring empty. * We could avoid this when the queue size does not exactly @@ -655,16 +685,12 @@ static void efx_start_datapath(struct efx_nic *efx) efx_for_each_channel_tx_queue(tx_queue, channel) efx_init_tx_queue(tx_queue); - /* The rx buffer allocation strategy is MTU dependent */ - efx_rx_strategy(channel); - efx_for_each_channel_rx_queue(rx_queue, channel) { efx_init_rx_queue(rx_queue); efx_nic_generate_fill_event(rx_queue); } - WARN_ON(channel->rx_pkt != NULL); - efx_rx_strategy(channel); + WARN_ON(channel->rx_pkt_n_frags); } if (netif_device_present(efx->net_dev)) @@ -683,7 +709,7 @@ static void efx_stop_datapath(struct efx_nic *efx) BUG_ON(efx->port_enabled); /* Only perform flush if dma is enabled */ - if (dev->is_busmaster) { + if (dev->is_busmaster && efx->state != STATE_RECOVERY) { rc = efx_nic_flush_queues(efx); if (rc && EFX_WORKAROUND_7803(efx)) { @@ -1596,13 +1622,15 @@ static void efx_start_all(struct efx_nic *efx) efx_start_port(efx); efx_start_datapath(efx); - /* Start the hardware monitor if there is one. Otherwise (we're link - * event driven), we have to poll the PHY because after an event queue - * flush, we could have a missed a link state change */ - if (efx->type->monitor != NULL) { + /* Start the hardware monitor if there is one */ + if (efx->type->monitor != NULL) queue_delayed_work(efx->workqueue, &efx->monitor_work, efx_monitor_interval); - } else { + + /* If link state detection is normally event-driven, we have + * to poll now because we could have missed a change + */ + if (efx_nic_rev(efx) >= EFX_REV_SIENA_A0) { mutex_lock(&efx->mac_lock); if (efx->phy_op->poll(efx)) efx_link_status_changed(efx); @@ -2309,7 +2337,9 @@ int efx_reset(struct efx_nic *efx, enum reset_type method) out: /* Leave device stopped if necessary */ - disabled = rc || method == RESET_TYPE_DISABLE; + disabled = rc || + method == RESET_TYPE_DISABLE || + method == RESET_TYPE_RECOVER_OR_DISABLE; rc2 = efx_reset_up(efx, method, !disabled); if (rc2) { disabled = true; @@ -2328,13 +2358,48 @@ out: return rc; } +/* Try recovery mechanisms. + * For now only EEH is supported. + * Returns 0 if the recovery mechanisms are unsuccessful. + * Returns a non-zero value otherwise. + */ +static int efx_try_recovery(struct efx_nic *efx) +{ +#ifdef CONFIG_EEH + /* A PCI error can occur and not be seen by EEH because nothing + * happens on the PCI bus. In this case the driver may fail and + * schedule a 'recover or reset', leading to this recovery handler. + * Manually call the eeh failure check function. + */ + struct eeh_dev *eehdev = + of_node_to_eeh_dev(pci_device_to_OF_node(efx->pci_dev)); + + if (eeh_dev_check_failure(eehdev)) { + /* The EEH mechanisms will handle the error and reset the + * device if necessary. + */ + return 1; + } +#endif + return 0; +} + /* The worker thread exists so that code that cannot sleep can * schedule a reset for later. */ static void efx_reset_work(struct work_struct *data) { struct efx_nic *efx = container_of(data, struct efx_nic, reset_work); - unsigned long pending = ACCESS_ONCE(efx->reset_pending); + unsigned long pending; + enum reset_type method; + + pending = ACCESS_ONCE(efx->reset_pending); + method = fls(pending) - 1; + + if ((method == RESET_TYPE_RECOVER_OR_DISABLE || + method == RESET_TYPE_RECOVER_OR_ALL) && + efx_try_recovery(efx)) + return; if (!pending) return; @@ -2346,7 +2411,7 @@ static void efx_reset_work(struct work_struct *data) * it cannot change again. */ if (efx->state == STATE_READY) - (void)efx_reset(efx, fls(pending) - 1); + (void)efx_reset(efx, method); rtnl_unlock(); } @@ -2355,11 +2420,20 @@ void efx_schedule_reset(struct efx_nic *efx, enum reset_type type) { enum reset_type method; + if (efx->state == STATE_RECOVERY) { + netif_dbg(efx, drv, efx->net_dev, + "recovering: skip scheduling %s reset\n", + RESET_TYPE(type)); + return; + } + switch (type) { case RESET_TYPE_INVISIBLE: case RESET_TYPE_ALL: + case RESET_TYPE_RECOVER_OR_ALL: case RESET_TYPE_WORLD: case RESET_TYPE_DISABLE: + case RESET_TYPE_RECOVER_OR_DISABLE: method = type; netif_dbg(efx, drv, efx->net_dev, "scheduling %s reset\n", RESET_TYPE(method)); @@ -2569,6 +2643,8 @@ static void efx_pci_remove(struct pci_dev *pci_dev) efx_fini_struct(efx); pci_set_drvdata(pci_dev, NULL); free_netdev(efx->net_dev); + + pci_disable_pcie_error_reporting(pci_dev); }; /* NIC VPD information @@ -2741,6 +2817,11 @@ static int efx_pci_probe(struct pci_dev *pci_dev, netif_warn(efx, probe, efx->net_dev, "failed to create MTDs (%d)\n", rc); + rc = pci_enable_pcie_error_reporting(pci_dev); + if (rc && rc != -EINVAL) + netif_warn(efx, probe, efx->net_dev, + "pci_enable_pcie_error_reporting failed (%d)\n", rc); + return 0; fail4: @@ -2865,12 +2946,112 @@ static const struct dev_pm_ops efx_pm_ops = { .restore = efx_pm_resume, }; +/* A PCI error affecting this device was detected. + * At this point MMIO and DMA may be disabled. + * Stop the software path and request a slot reset. + */ +static pci_ers_result_t efx_io_error_detected(struct pci_dev *pdev, + enum pci_channel_state state) +{ + pci_ers_result_t status = PCI_ERS_RESULT_RECOVERED; + struct efx_nic *efx = pci_get_drvdata(pdev); + + if (state == pci_channel_io_perm_failure) + return PCI_ERS_RESULT_DISCONNECT; + + rtnl_lock(); + + if (efx->state != STATE_DISABLED) { + efx->state = STATE_RECOVERY; + efx->reset_pending = 0; + + efx_device_detach_sync(efx); + + efx_stop_all(efx); + efx_stop_interrupts(efx, false); + + status = PCI_ERS_RESULT_NEED_RESET; + } else { + /* If the interface is disabled we don't want to do anything + * with it. + */ + status = PCI_ERS_RESULT_RECOVERED; + } + + rtnl_unlock(); + + pci_disable_device(pdev); + + return status; +} + +/* Fake a successfull reset, which will be performed later in efx_io_resume. */ +static pci_ers_result_t efx_io_slot_reset(struct pci_dev *pdev) +{ + struct efx_nic *efx = pci_get_drvdata(pdev); + pci_ers_result_t status = PCI_ERS_RESULT_RECOVERED; + int rc; + + if (pci_enable_device(pdev)) { + netif_err(efx, hw, efx->net_dev, + "Cannot re-enable PCI device after reset.\n"); + status = PCI_ERS_RESULT_DISCONNECT; + } + + rc = pci_cleanup_aer_uncorrect_error_status(pdev); + if (rc) { + netif_err(efx, hw, efx->net_dev, + "pci_cleanup_aer_uncorrect_error_status failed (%d)\n", rc); + /* Non-fatal error. Continue. */ + } + + return status; +} + +/* Perform the actual reset and resume I/O operations. */ +static void efx_io_resume(struct pci_dev *pdev) +{ + struct efx_nic *efx = pci_get_drvdata(pdev); + int rc; + + rtnl_lock(); + + if (efx->state == STATE_DISABLED) + goto out; + + rc = efx_reset(efx, RESET_TYPE_ALL); + if (rc) { + netif_err(efx, hw, efx->net_dev, + "efx_reset failed after PCI error (%d)\n", rc); + } else { + efx->state = STATE_READY; + netif_dbg(efx, hw, efx->net_dev, + "Done resetting and resuming IO after PCI error.\n"); + } + +out: + rtnl_unlock(); +} + +/* For simplicity and reliability, we always require a slot reset and try to + * reset the hardware when a pci error affecting the device is detected. + * We leave both the link_reset and mmio_enabled callback unimplemented: + * with our request for slot reset the mmio_enabled callback will never be + * called, and the link_reset callback is not used by AER or EEH mechanisms. + */ +static struct pci_error_handlers efx_err_handlers = { + .error_detected = efx_io_error_detected, + .slot_reset = efx_io_slot_reset, + .resume = efx_io_resume, +}; + static struct pci_driver efx_pci_driver = { .name = KBUILD_MODNAME, .id_table = efx_pci_table, .probe = efx_pci_probe, .remove = efx_pci_remove, .driver.pm = &efx_pm_ops, + .err_handler = &efx_err_handlers, }; /************************************************************************** |