1 files changed, 126 insertions, 61 deletions

diff --git a/drivers/net/fddi/defxx.c b/drivers/net/fddi/defxx.c
index caed6eee289..7f975a2c899 100644
--- a/drivers/net/fddi/defxx.c
+++ b/drivers/net/fddi/defxx.c
@@ -414,7 +414,7 @@ static void dfx_port_read_long(DFX_board_t *bp, int offset, u32 *data)
  * ================
  *
  * Overview:
- *   Retrieves the address range used to access control and status
+ *   Retrieves the address ranges used to access control and status
  *   registers.
  *
  * Returns:
@@ -422,8 +422,8 @@ static void dfx_port_read_long(DFX_board_t *bp, int offset, u32 *data)
  *
  * Arguments:
  *   bdev	- pointer to device information
- *   bar_start	- pointer to store the start address
- *   bar_len	- pointer to store the length of the area
+ *   bar_start	- pointer to store the start addresses
+ *   bar_len	- pointer to store the lengths of the areas
  *
  * Assumptions:
  *   I am sure there are some.
@@ -442,38 +442,47 @@ static void dfx_get_bars(struct device *bdev,
 	if (dfx_bus_pci) {
 		int num = dfx_use_mmio ? 0 : 1;
 
-		*bar_start = pci_resource_start(to_pci_dev(bdev), num);
-		*bar_len = pci_resource_len(to_pci_dev(bdev), num);
+		bar_start[0] = pci_resource_start(to_pci_dev(bdev), num);
+		bar_len[0] = pci_resource_len(to_pci_dev(bdev), num);
+		bar_start[2] = bar_start[1] = 0;
+		bar_len[2] = bar_len[1] = 0;
 	}
 	if (dfx_bus_eisa) {
 		unsigned long base_addr = to_eisa_device(bdev)->base_addr;
-		resource_size_t bar;
+		resource_size_t bar_lo;
+		resource_size_t bar_hi;
 
 		if (dfx_use_mmio) {
-			bar = inb(base_addr + PI_ESIC_K_MEM_ADD_CMP_2);
-			bar <<= 8;
-			bar |= inb(base_addr + PI_ESIC_K_MEM_ADD_CMP_1);
-			bar <<= 8;
-			bar |= inb(base_addr + PI_ESIC_K_MEM_ADD_CMP_0);
-			bar <<= 16;
-			*bar_start = bar;
-			bar = inb(base_addr + PI_ESIC_K_MEM_ADD_MASK_2);
-			bar <<= 8;
-			bar |= inb(base_addr + PI_ESIC_K_MEM_ADD_MASK_1);
-			bar <<= 8;
-			bar |= inb(base_addr + PI_ESIC_K_MEM_ADD_MASK_0);
-			bar <<= 16;
-			*bar_len = (bar | PI_MEM_ADD_MASK_M) + 1;
+			bar_lo = inb(base_addr + PI_ESIC_K_MEM_ADD_LO_CMP_2);
+			bar_lo <<= 8;
+			bar_lo |= inb(base_addr + PI_ESIC_K_MEM_ADD_LO_CMP_1);
+			bar_lo <<= 8;
+			bar_lo |= inb(base_addr + PI_ESIC_K_MEM_ADD_LO_CMP_0);
+			bar_lo <<= 8;
+			bar_start[0] = bar_lo;
+			bar_hi = inb(base_addr + PI_ESIC_K_MEM_ADD_HI_CMP_2);
+			bar_hi <<= 8;
+			bar_hi |= inb(base_addr + PI_ESIC_K_MEM_ADD_HI_CMP_1);
+			bar_hi <<= 8;
+			bar_hi |= inb(base_addr + PI_ESIC_K_MEM_ADD_HI_CMP_0);
+			bar_hi <<= 8;
+			bar_len[0] = ((bar_hi - bar_lo) | PI_MEM_ADD_MASK_M) +
+				     1;
 		} else {
-			*bar_start = base_addr;
-			*bar_len = PI_ESIC_K_CSR_IO_LEN +
-				   PI_ESIC_K_BURST_HOLDOFF_LEN;
+			bar_start[0] = base_addr;
+			bar_len[0] = PI_ESIC_K_CSR_IO_LEN;
 		}
+		bar_start[1] = base_addr + PI_DEFEA_K_BURST_HOLDOFF;
+		bar_len[1] = PI_ESIC_K_BURST_HOLDOFF_LEN;
+		bar_start[2] = base_addr + PI_ESIC_K_ESIC_CSR;
+		bar_len[2] = PI_ESIC_K_ESIC_CSR_LEN;
 	}
 	if (dfx_bus_tc) {
-		*bar_start = to_tc_dev(bdev)->resource.start +
-			     PI_TC_K_CSR_OFFSET;
-		*bar_len = PI_TC_K_CSR_LEN;
+		bar_start[0] = to_tc_dev(bdev)->resource.start +
+			       PI_TC_K_CSR_OFFSET;
+		bar_len[0] = PI_TC_K_CSR_LEN;
+		bar_start[2] = bar_start[1] = 0;
+		bar_len[2] = bar_len[1] = 0;
 	}
 }
 
@@ -518,13 +527,14 @@ static int dfx_register(struct device *bdev)
 {
 	static int version_disp;
 	int dfx_bus_pci = dev_is_pci(bdev);
+	int dfx_bus_eisa = DFX_BUS_EISA(bdev);
 	int dfx_bus_tc = DFX_BUS_TC(bdev);
 	int dfx_use_mmio = DFX_MMIO || dfx_bus_tc;
 	const char *print_name = dev_name(bdev);
 	struct net_device *dev;
 	DFX_board_t	  *bp;			/* board pointer */
-	resource_size_t bar_start = 0;		/* pointer to port */
-	resource_size_t bar_len = 0;		/* resource length */
+	resource_size_t bar_start[3];		/* pointers to ports */
+	resource_size_t bar_len[3];		/* resource length */
 	int alloc_size;				/* total buffer size used */
 	struct resource *region;
 	int err = 0;
@@ -542,10 +552,13 @@ static int dfx_register(struct device *bdev)
 	}
 
 	/* Enable PCI device. */
-	if (dfx_bus_pci && pci_enable_device(to_pci_dev(bdev))) {
-		printk(KERN_ERR "%s: Cannot enable PCI device, aborting\n",
-		       print_name);
-		goto err_out;
+	if (dfx_bus_pci) {
+		err = pci_enable_device(to_pci_dev(bdev));
+		if (err) {
+			pr_err("%s: Cannot enable PCI device, aborting\n",
+			       print_name);
+			goto err_out;
+		}
 	}
 
 	SET_NETDEV_DEV(dev, bdev);
@@ -554,31 +567,62 @@ static int dfx_register(struct device *bdev)
 	bp->bus_dev = bdev;
 	dev_set_drvdata(bdev, dev);
 
-	dfx_get_bars(bdev, &bar_start, &bar_len);
+	dfx_get_bars(bdev, bar_start, bar_len);
+	if (dfx_bus_eisa && dfx_use_mmio && bar_start[0] == 0) {
+		pr_err("%s: Cannot use MMIO, no address set, aborting\n",
+		       print_name);
+		pr_err("%s: Run ECU and set adapter's MMIO location\n",
+		       print_name);
+		pr_err("%s: Or recompile driver with \"CONFIG_DEFXX_MMIO=n\""
+		       "\n", print_name);
+		err = -ENXIO;
+		goto err_out;
+	}
 
 	if (dfx_use_mmio)
-		region = request_mem_region(bar_start, bar_len, print_name);
+		region = request_mem_region(bar_start[0], bar_len[0],
+					    print_name);
 	else
-		region = request_region(bar_start, bar_len, print_name);
+		region = request_region(bar_start[0], bar_len[0], print_name);
 	if (!region) {
-		printk(KERN_ERR "%s: Cannot reserve I/O resource "
-		       "0x%lx @ 0x%lx, aborting\n",
-		       print_name, (long)bar_len, (long)bar_start);
+		pr_err("%s: Cannot reserve %s resource 0x%lx @ 0x%lx, "
+		       "aborting\n", dfx_use_mmio ? "MMIO" : "I/O", print_name,
+		       (long)bar_len[0], (long)bar_start[0]);
 		err = -EBUSY;
 		goto err_out_disable;
 	}
+	if (bar_start[1] != 0) {
+		region = request_region(bar_start[1], bar_len[1], print_name);
+		if (!region) {
+			pr_err("%s: Cannot reserve I/O resource "
+			       "0x%lx @ 0x%lx, aborting\n", print_name,
+			       (long)bar_len[1], (long)bar_start[1]);
+			err = -EBUSY;
+			goto err_out_csr_region;
+		}
+	}
+	if (bar_start[2] != 0) {
+		region = request_region(bar_start[2], bar_len[2], print_name);
+		if (!region) {
+			pr_err("%s: Cannot reserve I/O resource "
+			       "0x%lx @ 0x%lx, aborting\n", print_name,
+			       (long)bar_len[2], (long)bar_start[2]);
+			err = -EBUSY;
+			goto err_out_bh_region;
+		}
+	}
 
 	/* Set up I/O base address. */
 	if (dfx_use_mmio) {
-		bp->base.mem = ioremap_nocache(bar_start, bar_len);
+		bp->base.mem = ioremap_nocache(bar_start[0], bar_len[0]);
 		if (!bp->base.mem) {
 			printk(KERN_ERR "%s: Cannot map MMIO\n", print_name);
 			err = -ENOMEM;
-			goto err_out_region;
+			goto err_out_esic_region;
 		}
 	} else {
-		bp->base.port = bar_start;
-		dev->base_addr = bar_start;
+		bp->base.port = bar_start[0];
+		dev->base_addr = bar_start[0];
 	}
 
 	/* Initialize new device structure */
@@ -587,7 +631,7 @@ static int dfx_register(struct device *bdev)
 	if (dfx_bus_pci)
 		pci_set_master(to_pci_dev(bdev));
 
-	if (dfx_driver_init(dev, print_name, bar_start) != DFX_K_SUCCESS) {
+	if (dfx_driver_init(dev, print_name, bar_start[0]) != DFX_K_SUCCESS) {
 		err = -ENODEV;
 		goto err_out_unmap;
 	}
@@ -615,11 +659,19 @@ err_out_unmap:
 	if (dfx_use_mmio)
 		iounmap(bp->base.mem);
 
-err_out_region:
+err_out_esic_region:
+	if (bar_start[2] != 0)
+		release_region(bar_start[2], bar_len[2]);
+
+err_out_bh_region:
+	if (bar_start[1] != 0)
+		release_region(bar_start[1], bar_len[1]);
+
+err_out_csr_region:
 	if (dfx_use_mmio)
-		release_mem_region(bar_start, bar_len);
+		release_mem_region(bar_start[0], bar_len[0]);
 	else
-		release_region(bar_start, bar_len);
+		release_region(bar_start[0], bar_len[0]);
 
 err_out_disable:
 	if (dfx_bus_pci)
@@ -711,13 +763,14 @@ static void dfx_bus_init(struct net_device *dev)
 		}
 
 		/*
-		 * Enable memory decoding (MEMCS0) and/or port decoding
+		 * Enable memory decoding (MEMCS1) and/or port decoding
 		 * (IOCS1/IOCS0) as appropriate in Function Control
-		 * Register.  IOCS0 is used for PDQ registers, taking 16
-		 * 32-bit words, while IOCS1 is used for the Burst Holdoff
-		 * register, taking a single 32-bit word only.  We use the
-		 * slot-specific I/O range as per the ESIC spec, that is
-		 * set bits 15:12 in the mask registers to mask them out.
+		 * Register.  MEMCS1 or IOCS0 is used for PDQ registers,
+		 * taking 16 32-bit words, while IOCS1 is used for the
+		 * Burst Holdoff register, taking a single 32-bit word
+		 * only.  We use the slot-specific I/O range as per the
+		 * ESIC spec, that is set bits 15:12 in the mask registers
+		 * to mask them out.
 		 */
 
 		/* Set the decode range of the board.  */
@@ -742,9 +795,11 @@ static void dfx_bus_init(struct net_device *dev)
 		outb(val, base_addr + PI_ESIC_K_IO_ADD_MASK_1_0);
 
 		/* Enable the decoders.  */
-		val = PI_FUNCTION_CNTRL_M_IOCS1 | PI_FUNCTION_CNTRL_M_IOCS0;
+		val = PI_FUNCTION_CNTRL_M_IOCS1;
 		if (dfx_use_mmio)
-			val |= PI_FUNCTION_CNTRL_M_MEMCS0;
+			val |= PI_FUNCTION_CNTRL_M_MEMCS1;
+		else
+			val |= PI_FUNCTION_CNTRL_M_IOCS0;
 		outb(val, base_addr + PI_ESIC_K_FUNCTION_CNTRL);
 
 		/*
@@ -838,6 +893,12 @@ static void dfx_bus_uninit(struct net_device *dev)
 		val = inb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0);
 		val &= ~PI_CONFIG_STAT_0_M_INT_ENB;
 		outb(val, base_addr + PI_ESIC_K_IO_CONFIG_STAT_0);
+
+		/* Disable the board.  */
+		outb(0, base_addr + PI_ESIC_K_SLOT_CNTRL);
+
+		/* Disable memory and port decoders.  */
+		outb(0, base_addr + PI_ESIC_K_FUNCTION_CNTRL);
 	}
 	if (dfx_bus_pci) {
 		/* Disable interrupts at PCI bus interface chip (PFI) */
@@ -1061,8 +1122,8 @@ static int dfx_driver_init(struct net_device *dev, const char *print_name,
 		board_name = "DEFEA";
 	if (dfx_bus_pci)
 		board_name = "DEFPA";
-	pr_info("%s: %s at %saddr = 0x%llx, IRQ = %d, Hardware addr = %pMF\n",
-		print_name, board_name, dfx_use_mmio ? "" : "I/O ",
+	pr_info("%s: %s at %s addr = 0x%llx, IRQ = %d, Hardware addr = %pMF\n",
+		print_name, board_name, dfx_use_mmio ? "MMIO" : "I/O",
 		(long long)bar_start, dev->irq, dev->dev_addr);
 
 	/*
@@ -3636,8 +3697,8 @@ static void dfx_unregister(struct device *bdev)
 	int dfx_bus_pci = dev_is_pci(bdev);
 	int dfx_bus_tc = DFX_BUS_TC(bdev);
 	int dfx_use_mmio = DFX_MMIO || dfx_bus_tc;
-	resource_size_t bar_start = 0;		/* pointer to port */
-	resource_size_t bar_len = 0;		/* resource length */
+	resource_size_t bar_start[3];		/* pointers to ports */
+	resource_size_t bar_len[3];		/* resource lengths */
 	int		alloc_size;		/* total buffer size used */
 
 	unregister_netdev(dev);
@@ -3655,12 +3716,16 @@ static void dfx_unregister(struct device *bdev)
 
 	dfx_bus_uninit(dev);
 
-	dfx_get_bars(bdev, &bar_start, &bar_len);
+	dfx_get_bars(bdev, bar_start, bar_len);
+	if (bar_start[2] != 0)
+		release_region(bar_start[2], bar_len[2]);
+	if (bar_start[1] != 0)
+		release_region(bar_start[1], bar_len[1]);
 	if (dfx_use_mmio) {
 		iounmap(bp->base.mem);
-		release_mem_region(bar_start, bar_len);
+		release_mem_region(bar_start[0], bar_len[0]);
 	} else
-		release_region(bar_start, bar_len);
+		release_region(bar_start[0], bar_len[0]);
 
 	if (dfx_bus_pci)
 		pci_disable_device(to_pci_dev(bdev));