summaryrefslogtreecommitdiffstats
path: root/drivers/net/ixgbe/ixgbe_82599.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ixgbe/ixgbe_82599.c')
-rw-r--r--drivers/net/ixgbe/ixgbe_82599.c480
1 files changed, 71 insertions, 409 deletions
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index b405a00817c..e9706eb8e4f 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -39,6 +39,8 @@
#define IXGBE_82599_MC_TBL_SIZE 128
#define IXGBE_82599_VFT_TBL_SIZE 128
+void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
+void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
ixgbe_link_speed speed,
@@ -69,8 +71,14 @@ static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw)
if (hw->phy.multispeed_fiber) {
/* Set up dual speed SFP+ support */
mac->ops.setup_link = &ixgbe_setup_mac_link_multispeed_fiber;
+ mac->ops.disable_tx_laser =
+ &ixgbe_disable_tx_laser_multispeed_fiber;
+ mac->ops.enable_tx_laser =
+ &ixgbe_enable_tx_laser_multispeed_fiber;
mac->ops.flap_tx_laser = &ixgbe_flap_tx_laser_multispeed_fiber;
} else {
+ mac->ops.disable_tx_laser = NULL;
+ mac->ops.enable_tx_laser = NULL;
mac->ops.flap_tx_laser = NULL;
if ((mac->ops.get_media_type(hw) ==
ixgbe_media_type_backplane) &&
@@ -125,27 +133,6 @@ setup_sfp_out:
return ret_val;
}
-/**
- * ixgbe_get_pcie_msix_count_82599 - Gets MSI-X vector count
- * @hw: pointer to hardware structure
- *
- * Read PCIe configuration space, and get the MSI-X vector count from
- * the capabilities table.
- **/
-static u32 ixgbe_get_pcie_msix_count_82599(struct ixgbe_hw *hw)
-{
- struct ixgbe_adapter *adapter = hw->back;
- u16 msix_count;
- pci_read_config_word(adapter->pdev, IXGBE_PCIE_MSIX_82599_CAPS,
- &msix_count);
- msix_count &= IXGBE_PCIE_MSIX_TBL_SZ_MASK;
-
- /* MSI-X count is zero-based in HW, so increment to give proper value */
- msix_count++;
-
- return msix_count;
-}
-
static s32 ixgbe_get_invariants_82599(struct ixgbe_hw *hw)
{
struct ixgbe_mac_info *mac = &hw->mac;
@@ -157,7 +144,7 @@ static s32 ixgbe_get_invariants_82599(struct ixgbe_hw *hw)
mac->num_rar_entries = IXGBE_82599_RAR_ENTRIES;
mac->max_rx_queues = IXGBE_82599_MAX_RX_QUEUES;
mac->max_tx_queues = IXGBE_82599_MAX_TX_QUEUES;
- mac->max_msix_vectors = ixgbe_get_pcie_msix_count_82599(hw);
+ mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw);
return 0;
}
@@ -415,6 +402,44 @@ s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw,
return status;
}
+ /**
+ * ixgbe_disable_tx_laser_multispeed_fiber - Disable Tx laser
+ * @hw: pointer to hardware structure
+ *
+ * The base drivers may require better control over SFP+ module
+ * PHY states. This includes selectively shutting down the Tx
+ * laser on the PHY, effectively halting physical link.
+ **/
+void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
+{
+ u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
+
+ /* Disable tx laser; allow 100us to go dark per spec */
+ esdp_reg |= IXGBE_ESDP_SDP3;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+ IXGBE_WRITE_FLUSH(hw);
+ udelay(100);
+}
+
+/**
+ * ixgbe_enable_tx_laser_multispeed_fiber - Enable Tx laser
+ * @hw: pointer to hardware structure
+ *
+ * The base drivers may require better control over SFP+ module
+ * PHY states. This includes selectively turning on the Tx
+ * laser on the PHY, effectively starting physical link.
+ **/
+void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
+{
+ u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
+
+ /* Enable tx laser; allow 100ms to light up */
+ esdp_reg &= ~IXGBE_ESDP_SDP3;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+ IXGBE_WRITE_FLUSH(hw);
+ msleep(100);
+}
+
/**
* ixgbe_flap_tx_laser_multispeed_fiber - Flap Tx laser
* @hw: pointer to hardware structure
@@ -429,23 +454,11 @@ s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw,
**/
void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
{
- u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
-
hw_dbg(hw, "ixgbe_flap_tx_laser_multispeed_fiber\n");
if (hw->mac.autotry_restart) {
- /* Disable tx laser; allow 100us to go dark per spec */
- esdp_reg |= IXGBE_ESDP_SDP3;
- IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
- IXGBE_WRITE_FLUSH(hw);
- udelay(100);
-
- /* Enable tx laser; allow 100ms to light up */
- esdp_reg &= ~IXGBE_ESDP_SDP3;
- IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
- IXGBE_WRITE_FLUSH(hw);
- msleep(100);
-
+ ixgbe_disable_tx_laser_multispeed_fiber(hw);
+ ixgbe_enable_tx_laser_multispeed_fiber(hw);
hw->mac.autotry_restart = false;
}
}
@@ -608,6 +621,7 @@ static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
s32 i, j;
bool link_up = false;
u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ struct ixgbe_adapter *adapter = hw->back;
hw_dbg(hw, "ixgbe_setup_mac_link_smartspeed.\n");
@@ -692,64 +706,14 @@ static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
autoneg_wait_to_complete);
out:
+ if (link_up && (link_speed == IXGBE_LINK_SPEED_1GB_FULL))
+ netif_info(adapter, hw, adapter->netdev, "Smartspeed has"
+ " downgraded the link speed from the maximum"
+ " advertised\n");
return status;
}
/**
- * ixgbe_check_mac_link_82599 - Determine link and speed status
- * @hw: pointer to hardware structure
- * @speed: pointer to link speed
- * @link_up: true when link is up
- * @link_up_wait_to_complete: bool used to wait for link up or not
- *
- * Reads the links register to determine if link is up and the current speed
- **/
-static s32 ixgbe_check_mac_link_82599(struct ixgbe_hw *hw,
- ixgbe_link_speed *speed,
- bool *link_up,
- bool link_up_wait_to_complete)
-{
- u32 links_reg;
- u32 i;
-
- links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
- if (link_up_wait_to_complete) {
- for (i = 0; i < IXGBE_LINK_UP_TIME; i++) {
- if (links_reg & IXGBE_LINKS_UP) {
- *link_up = true;
- break;
- } else {
- *link_up = false;
- }
- msleep(100);
- links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
- }
- } else {
- if (links_reg & IXGBE_LINKS_UP)
- *link_up = true;
- else
- *link_up = false;
- }
-
- if ((links_reg & IXGBE_LINKS_SPEED_82599) ==
- IXGBE_LINKS_SPEED_10G_82599)
- *speed = IXGBE_LINK_SPEED_10GB_FULL;
- else if ((links_reg & IXGBE_LINKS_SPEED_82599) ==
- IXGBE_LINKS_SPEED_1G_82599)
- *speed = IXGBE_LINK_SPEED_1GB_FULL;
- else
- *speed = IXGBE_LINK_SPEED_100_FULL;
-
- /* if link is down, zero out the current_mode */
- if (*link_up == false) {
- hw->fc.current_mode = ixgbe_fc_none;
- hw->fc.fc_was_autonegged = false;
- }
-
- return 0;
-}
-
-/**
* ixgbe_setup_mac_link_82599 - Set MAC link speed
* @hw: pointer to hardware structure
* @speed: new link speed
@@ -1011,243 +975,6 @@ reset_hw_out:
}
/**
- * ixgbe_clear_vmdq_82599 - Disassociate a VMDq pool index from a rx address
- * @hw: pointer to hardware struct
- * @rar: receive address register index to disassociate
- * @vmdq: VMDq pool index to remove from the rar
- **/
-static s32 ixgbe_clear_vmdq_82599(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
-{
- u32 mpsar_lo, mpsar_hi;
- u32 rar_entries = hw->mac.num_rar_entries;
-
- if (rar < rar_entries) {
- mpsar_lo = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar));
- mpsar_hi = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar));
-
- if (!mpsar_lo && !mpsar_hi)
- goto done;
-
- if (vmdq == IXGBE_CLEAR_VMDQ_ALL) {
- if (mpsar_lo) {
- IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), 0);
- mpsar_lo = 0;
- }
- if (mpsar_hi) {
- IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), 0);
- mpsar_hi = 0;
- }
- } else if (vmdq < 32) {
- mpsar_lo &= ~(1 << vmdq);
- IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar_lo);
- } else {
- mpsar_hi &= ~(1 << (vmdq - 32));
- IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar_hi);
- }
-
- /* was that the last pool using this rar? */
- if (mpsar_lo == 0 && mpsar_hi == 0 && rar != 0)
- hw->mac.ops.clear_rar(hw, rar);
- } else {
- hw_dbg(hw, "RAR index %d is out of range.\n", rar);
- }
-
-done:
- return 0;
-}
-
-/**
- * ixgbe_set_vmdq_82599 - Associate a VMDq pool index with a rx address
- * @hw: pointer to hardware struct
- * @rar: receive address register index to associate with a VMDq index
- * @vmdq: VMDq pool index
- **/
-static s32 ixgbe_set_vmdq_82599(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
-{
- u32 mpsar;
- u32 rar_entries = hw->mac.num_rar_entries;
-
- if (rar < rar_entries) {
- if (vmdq < 32) {
- mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar));
- mpsar |= 1 << vmdq;
- IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar);
- } else {
- mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar));
- mpsar |= 1 << (vmdq - 32);
- IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar);
- }
- } else {
- hw_dbg(hw, "RAR index %d is out of range.\n", rar);
- }
- return 0;
-}
-
-/**
- * ixgbe_set_vfta_82599 - Set VLAN filter table
- * @hw: pointer to hardware structure
- * @vlan: VLAN id to write to VLAN filter
- * @vind: VMDq output index that maps queue to VLAN id in VFVFB
- * @vlan_on: boolean flag to turn on/off VLAN in VFVF
- *
- * Turn on/off specified VLAN in the VLAN filter table.
- **/
-static s32 ixgbe_set_vfta_82599(struct ixgbe_hw *hw, u32 vlan, u32 vind,
- bool vlan_on)
-{
- u32 regindex;
- u32 vlvf_index;
- u32 bitindex;
- u32 bits;
- u32 first_empty_slot;
- u32 vt_ctl;
-
- if (vlan > 4095)
- return IXGBE_ERR_PARAM;
-
- /*
- * this is a 2 part operation - first the VFTA, then the
- * VLVF and VLVFB if vind is set
- */
-
- /* Part 1
- * The VFTA is a bitstring made up of 128 32-bit registers
- * that enable the particular VLAN id, much like the MTA:
- * bits[11-5]: which register
- * bits[4-0]: which bit in the register
- */
- regindex = (vlan >> 5) & 0x7F;
- bitindex = vlan & 0x1F;
- bits = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex));
- if (vlan_on)
- bits |= (1 << bitindex);
- else
- bits &= ~(1 << bitindex);
- IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), bits);
-
-
- /* Part 2
- * If VT mode is set
- * Either vlan_on
- * make sure the vlan is in VLVF
- * set the vind bit in the matching VLVFB
- * Or !vlan_on
- * clear the pool bit and possibly the vind
- */
- vt_ctl = IXGBE_READ_REG(hw, IXGBE_VT_CTL);
- if (!(vt_ctl & IXGBE_VT_CTL_VT_ENABLE))
- goto out;
-
- /* find the vlanid or the first empty slot */
- first_empty_slot = 0;
-
- for (vlvf_index = 1; vlvf_index < IXGBE_VLVF_ENTRIES; vlvf_index++) {
- bits = IXGBE_READ_REG(hw, IXGBE_VLVF(vlvf_index));
- if (!bits && !first_empty_slot)
- first_empty_slot = vlvf_index;
- else if ((bits & 0x0FFF) == vlan)
- break;
- }
-
- if (vlvf_index >= IXGBE_VLVF_ENTRIES) {
- if (first_empty_slot)
- vlvf_index = first_empty_slot;
- else {
- hw_dbg(hw, "No space in VLVF.\n");
- goto out;
- }
- }
-
- if (vlan_on) {
- /* set the pool bit */
- if (vind < 32) {
- bits = IXGBE_READ_REG(hw,
- IXGBE_VLVFB(vlvf_index * 2));
- bits |= (1 << vind);
- IXGBE_WRITE_REG(hw,
- IXGBE_VLVFB(vlvf_index * 2), bits);
- } else {
- bits = IXGBE_READ_REG(hw,
- IXGBE_VLVFB((vlvf_index * 2) + 1));
- bits |= (1 << (vind - 32));
- IXGBE_WRITE_REG(hw,
- IXGBE_VLVFB((vlvf_index * 2) + 1), bits);
- }
- } else {
- /* clear the pool bit */
- if (vind < 32) {
- bits = IXGBE_READ_REG(hw,
- IXGBE_VLVFB(vlvf_index * 2));
- bits &= ~(1 << vind);
- IXGBE_WRITE_REG(hw,
- IXGBE_VLVFB(vlvf_index * 2), bits);
- bits |= IXGBE_READ_REG(hw,
- IXGBE_VLVFB((vlvf_index * 2) + 1));
- } else {
- bits = IXGBE_READ_REG(hw,
- IXGBE_VLVFB((vlvf_index * 2) + 1));
- bits &= ~(1 << (vind - 32));
- IXGBE_WRITE_REG(hw,
- IXGBE_VLVFB((vlvf_index * 2) + 1), bits);
- bits |= IXGBE_READ_REG(hw,
- IXGBE_VLVFB(vlvf_index * 2));
- }
- }
-
- if (bits) {
- IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index),
- (IXGBE_VLVF_VIEN | vlan));
- /* if bits is non-zero then some pools/VFs are still
- * using this VLAN ID. Force the VFTA entry to on */
- bits = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex));
- bits |= (1 << bitindex);
- IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), bits);
- }
- else
- IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index), 0);
-
-out:
- return 0;
-}
-
-/**
- * ixgbe_clear_vfta_82599 - Clear VLAN filter table
- * @hw: pointer to hardware structure
- *
- * Clears the VLAN filer table, and the VMDq index associated with the filter
- **/
-static s32 ixgbe_clear_vfta_82599(struct ixgbe_hw *hw)
-{
- u32 offset;
-
- for (offset = 0; offset < hw->mac.vft_size; offset++)
- IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0);
-
- for (offset = 0; offset < IXGBE_VLVF_ENTRIES; offset++) {
- IXGBE_WRITE_REG(hw, IXGBE_VLVF(offset), 0);
- IXGBE_WRITE_REG(hw, IXGBE_VLVFB(offset * 2), 0);
- IXGBE_WRITE_REG(hw, IXGBE_VLVFB((offset * 2) + 1), 0);
- }
-
- return 0;
-}
-
-/**
- * ixgbe_init_uta_tables_82599 - Initialize the Unicast Table Array
- * @hw: pointer to hardware structure
- **/
-static s32 ixgbe_init_uta_tables_82599(struct ixgbe_hw *hw)
-{
- int i;
- hw_dbg(hw, " Clearing UTA\n");
-
- for (i = 0; i < 128; i++)
- IXGBE_WRITE_REG(hw, IXGBE_UTA(i), 0);
-
- return 0;
-}
-
-/**
* ixgbe_reinit_fdir_tables_82599 - Reinitialize Flow Director tables.
* @hw: pointer to hardware structure
**/
@@ -1269,7 +996,7 @@ s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw)
}
if (i >= IXGBE_FDIRCMD_CMD_POLL) {
hw_dbg(hw ,"Flow Director previous command isn't complete, "
- "aborting table re-initialization. \n");
+ "aborting table re-initialization.\n");
return IXGBE_ERR_FDIR_REINIT_FAILED;
}
@@ -2428,10 +2155,14 @@ sfp_check:
goto out;
switch (hw->phy.type) {
- case ixgbe_phy_tw_tyco:
- case ixgbe_phy_tw_unknown:
+ case ixgbe_phy_sfp_passive_tyco:
+ case ixgbe_phy_sfp_passive_unknown:
physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
break;
+ case ixgbe_phy_sfp_ftl_active:
+ case ixgbe_phy_sfp_active_unknown:
+ physical_layer = IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA;
+ break;
case ixgbe_phy_sfp_avago:
case ixgbe_phy_sfp_ftl:
case ixgbe_phy_sfp_intel:
@@ -2511,75 +2242,6 @@ static s32 ixgbe_get_device_caps_82599(struct ixgbe_hw *hw, u16 *device_caps)
}
/**
- * ixgbe_get_san_mac_addr_offset_82599 - SAN MAC address offset for 82599
- * @hw: pointer to hardware structure
- * @san_mac_offset: SAN MAC address offset
- *
- * This function will read the EEPROM location for the SAN MAC address
- * pointer, and returns the value at that location. This is used in both
- * get and set mac_addr routines.
- **/
-static s32 ixgbe_get_san_mac_addr_offset_82599(struct ixgbe_hw *hw,
- u16 *san_mac_offset)
-{
- /*
- * First read the EEPROM pointer to see if the MAC addresses are
- * available.
- */
- hw->eeprom.ops.read(hw, IXGBE_SAN_MAC_ADDR_PTR, san_mac_offset);
-
- return 0;
-}
-
-/**
- * ixgbe_get_san_mac_addr_82599 - SAN MAC address retrieval for 82599
- * @hw: pointer to hardware structure
- * @san_mac_addr: SAN MAC address
- *
- * Reads the SAN MAC address from the EEPROM, if it's available. This is
- * per-port, so set_lan_id() must be called before reading the addresses.
- * set_lan_id() is called by identify_sfp(), but this cannot be relied
- * upon for non-SFP connections, so we must call it here.
- **/
-static s32 ixgbe_get_san_mac_addr_82599(struct ixgbe_hw *hw, u8 *san_mac_addr)
-{
- u16 san_mac_data, san_mac_offset;
- u8 i;
-
- /*
- * First read the EEPROM pointer to see if the MAC addresses are
- * available. If they're not, no point in calling set_lan_id() here.
- */
- ixgbe_get_san_mac_addr_offset_82599(hw, &san_mac_offset);
-
- if ((san_mac_offset == 0) || (san_mac_offset == 0xFFFF)) {
- /*
- * No addresses available in this EEPROM. It's not an
- * error though, so just wipe the local address and return.
- */
- for (i = 0; i < 6; i++)
- san_mac_addr[i] = 0xFF;
-
- goto san_mac_addr_out;
- }
-
- /* make sure we know which port we need to program */
- hw->mac.ops.set_lan_id(hw);
- /* apply the port offset to the address offset */
- (hw->bus.func) ? (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT1_OFFSET) :
- (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT0_OFFSET);
- for (i = 0; i < 3; i++) {
- hw->eeprom.ops.read(hw, san_mac_offset, &san_mac_data);
- san_mac_addr[i * 2] = (u8)(san_mac_data);
- san_mac_addr[i * 2 + 1] = (u8)(san_mac_data >> 8);
- san_mac_offset++;
- }
-
-san_mac_addr_out:
- return 0;
-}
-
-/**
* ixgbe_verify_fw_version_82599 - verify fw version for 82599
* @hw: pointer to hardware structure
*
@@ -2681,7 +2343,7 @@ static struct ixgbe_mac_operations mac_ops_82599 = {
.get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82599,
.enable_rx_dma = &ixgbe_enable_rx_dma_82599,
.get_mac_addr = &ixgbe_get_mac_addr_generic,
- .get_san_mac_addr = &ixgbe_get_san_mac_addr_82599,
+ .get_san_mac_addr = &ixgbe_get_san_mac_addr_generic,
.get_device_caps = &ixgbe_get_device_caps_82599,
.get_wwn_prefix = &ixgbe_get_wwn_prefix_82599,
.stop_adapter = &ixgbe_stop_adapter_generic,
@@ -2690,7 +2352,7 @@ static struct ixgbe_mac_operations mac_ops_82599 = {
.read_analog_reg8 = &ixgbe_read_analog_reg8_82599,
.write_analog_reg8 = &ixgbe_write_analog_reg8_82599,
.setup_link = &ixgbe_setup_mac_link_82599,
- .check_link = &ixgbe_check_mac_link_82599,
+ .check_link = &ixgbe_check_mac_link_generic,
.get_link_capabilities = &ixgbe_get_link_capabilities_82599,
.led_on = &ixgbe_led_on_generic,
.led_off = &ixgbe_led_off_generic,
@@ -2698,23 +2360,23 @@ static struct ixgbe_mac_operations mac_ops_82599 = {
.blink_led_stop = &ixgbe_blink_led_stop_generic,
.set_rar = &ixgbe_set_rar_generic,
.clear_rar = &ixgbe_clear_rar_generic,
- .set_vmdq = &ixgbe_set_vmdq_82599,
- .clear_vmdq = &ixgbe_clear_vmdq_82599,
+ .set_vmdq = &ixgbe_set_vmdq_generic,
+ .clear_vmdq = &ixgbe_clear_vmdq_generic,
.init_rx_addrs = &ixgbe_init_rx_addrs_generic,
.update_uc_addr_list = &ixgbe_update_uc_addr_list_generic,
.update_mc_addr_list = &ixgbe_update_mc_addr_list_generic,
.enable_mc = &ixgbe_enable_mc_generic,
.disable_mc = &ixgbe_disable_mc_generic,
- .clear_vfta = &ixgbe_clear_vfta_82599,
- .set_vfta = &ixgbe_set_vfta_82599,
- .fc_enable = &ixgbe_fc_enable_generic,
- .init_uta_tables = &ixgbe_init_uta_tables_82599,
+ .clear_vfta = &ixgbe_clear_vfta_generic,
+ .set_vfta = &ixgbe_set_vfta_generic,
+ .fc_enable = &ixgbe_fc_enable_generic,
+ .init_uta_tables = &ixgbe_init_uta_tables_generic,
.setup_sfp = &ixgbe_setup_sfp_modules_82599,
};
static struct ixgbe_eeprom_operations eeprom_ops_82599 = {
.init_params = &ixgbe_init_eeprom_params_generic,
- .read = &ixgbe_read_eeprom_generic,
+ .read = &ixgbe_read_eerd_generic,
.write = &ixgbe_write_eeprom_generic,
.validate_checksum = &ixgbe_validate_eeprom_checksum_generic,
.update_checksum = &ixgbe_update_eeprom_checksum_generic,
@@ -2723,7 +2385,7 @@ static struct ixgbe_eeprom_operations eeprom_ops_82599 = {
static struct ixgbe_phy_operations phy_ops_82599 = {
.identify = &ixgbe_identify_phy_82599,
.identify_sfp = &ixgbe_identify_sfp_module_generic,
- .init = &ixgbe_init_phy_ops_82599,
+ .init = &ixgbe_init_phy_ops_82599,
.reset = &ixgbe_reset_phy_generic,
.read_reg = &ixgbe_read_phy_reg_generic,
.write_reg = &ixgbe_write_phy_reg_generic,
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-11 04:21:00 +0000