diff options
Diffstat (limited to 'drivers/net/qlcnic/qlcnic.h')
| -rw-r--r-- | drivers/net/qlcnic/qlcnic.h | 40 |
1 files changed, 25 insertions, 15 deletions
diff --git a/drivers/net/qlcnic/qlcnic.h b/drivers/net/qlcnic/qlcnic.h index 0da94b208db..896d40df9a1 100644 --- a/drivers/net/qlcnic/qlcnic.h +++ b/drivers/net/qlcnic/qlcnic.h @@ -51,8 +51,9 @@ #define _QLCNIC_LINUX_MAJOR 5 #define _QLCNIC_LINUX_MINOR 0 -#define _QLCNIC_LINUX_SUBVERSION 0 -#define QLCNIC_LINUX_VERSIONID "5.0.0" +#define _QLCNIC_LINUX_SUBVERSION 2 +#define QLCNIC_LINUX_VERSIONID "5.0.2" +#define QLCNIC_DRV_IDC_VER 0x01 #define QLCNIC_VERSION_CODE(a, b, c) (((a) << 24) + ((b) << 16) + (c)) #define _major(v) (((v) >> 24) & 0xff) @@ -98,8 +99,6 @@ #define QLCNIC_CT_DEFAULT_RX_BUF_LEN 2048 #define QLCNIC_LRO_BUFFER_EXTRA 2048 -#define QLCNIC_RX_LRO_BUFFER_LENGTH (8060) - /* Opcodes to be used with the commands */ #define TX_ETHER_PKT 0x01 #define TX_TCP_PKT 0x02 @@ -133,7 +132,6 @@ #define RCV_RING_NORMAL 0 #define RCV_RING_JUMBO 1 -#define RCV_RING_LRO 2 #define MIN_CMD_DESCRIPTORS 64 #define MIN_RCV_DESCRIPTORS 64 @@ -144,7 +142,6 @@ #define MAX_RCV_DESCRIPTORS_10G 8192 #define MAX_JUMBO_RCV_DESCRIPTORS_1G 512 #define MAX_JUMBO_RCV_DESCRIPTORS_10G 1024 -#define MAX_LRO_RCV_DESCRIPTORS 8 #define DEFAULT_RCV_DESCRIPTORS_1G 2048 #define DEFAULT_RCV_DESCRIPTORS_10G 4096 @@ -152,8 +149,6 @@ #define get_next_index(index, length) \ (((index) + 1) & ((length) - 1)) -#define MPORT_MULTI_FUNCTION_MODE 0x2222 - /* * Following data structures describe the descriptors that will be used. * Added fileds of tcpHdrSize and ipHdrSize, The driver needs to do it only when @@ -399,13 +394,9 @@ struct qlcnic_hardware_context { unsigned long pci_len0; - u32 ocm_win; - u32 crb_win; - rwlock_t crb_lock; struct mutex mem_lock; - u8 cut_through; u8 revision_id; u8 pci_func; u8 linkup; @@ -428,6 +419,10 @@ struct qlcnic_adapter_stats { u64 xmit_on; u64 xmit_off; u64 skb_alloc_failure; + u64 null_skb; + u64 null_rxbuf; + u64 rx_dma_map_error; + u64 tx_dma_map_error; }; /* @@ -916,14 +911,12 @@ struct qlcnic_adapter { u16 num_txd; u16 num_rxd; u16 num_jumbo_rxd; - u16 num_lro_rxd; u8 max_rds_rings; u8 max_sds_rings; u8 driver_mismatch; u8 msix_supported; u8 rx_csum; - u8 pci_using_dac; u8 portnum; u8 physical_port; @@ -958,11 +951,15 @@ struct qlcnic_adapter { u8 dev_state; u8 diag_test; u8 diag_cnt; + u8 reset_ack_timeo; + u8 dev_init_timeo; u8 rsrd1; - u16 rsrd2; + u16 msg_enable; u8 mac_addr[ETH_ALEN]; + u64 dev_rst_time; + struct qlcnic_adapter_stats stats; struct qlcnic_recv_context recv_ctx; @@ -994,6 +991,11 @@ u32 qlcnic_hw_read_wx_2M(struct qlcnic_adapter *adapter, ulong off); int qlcnic_hw_write_wx_2M(struct qlcnic_adapter *, ulong off, u32 data); int qlcnic_pci_mem_write_2M(struct qlcnic_adapter *, u64 off, u64 data); int qlcnic_pci_mem_read_2M(struct qlcnic_adapter *, u64 off, u64 *data); +void qlcnic_pci_camqm_read_2M(struct qlcnic_adapter *, u64, u64 *); +void qlcnic_pci_camqm_write_2M(struct qlcnic_adapter *, u64, u64); + +#define ADDR_IN_RANGE(addr, low, high) \ + (((addr) < (high)) && ((addr) >= (low))) #define QLCRD32(adapter, off) \ (qlcnic_hw_read_wx_2M(adapter, off)) @@ -1035,6 +1037,7 @@ int qlcnic_need_fw_reset(struct qlcnic_adapter *adapter); void qlcnic_request_firmware(struct qlcnic_adapter *adapter); void qlcnic_release_firmware(struct qlcnic_adapter *adapter); int qlcnic_pinit_from_rom(struct qlcnic_adapter *adapter); +int qlcnic_setup_idc_param(struct qlcnic_adapter *adapter); int qlcnic_rom_fast_read(struct qlcnic_adapter *adapter, int addr, int *valp); int qlcnic_rom_fast_read_words(struct qlcnic_adapter *adapter, int addr, @@ -1128,4 +1131,11 @@ static inline u32 qlcnic_tx_avail(struct qlcnic_host_tx_ring *tx_ring) extern const struct ethtool_ops qlcnic_ethtool_ops; +#define QLCDB(adapter, lvl, _fmt, _args...) do { \ + if (NETIF_MSG_##lvl & adapter->msg_enable) \ + printk(KERN_INFO "%s: %s: " _fmt, \ + dev_name(&adapter->pdev->dev), \ + __func__, ##_args); \ + } while (0) + #endif /* __QLCNIC_H_ */ |