diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath10k/core.c')
| -rw-r--r-- | drivers/net/wireless/ath/ath10k/core.c | 72 |
1 files changed, 72 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index 2d0671ebcf2..310e12bc078 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -57,6 +57,49 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .board_ext_size = QCA988X_BOARD_EXT_DATA_SZ, }, }, + { + .id = QCA6174_HW_2_1_VERSION, + .name = "qca6174 hw2.1", + .patch_load_addr = QCA6174_HW_2_1_PATCH_LOAD_ADDR, + .uart_pin = 6, + .fw = { + .dir = QCA6174_HW_2_1_FW_DIR, + .fw = QCA6174_HW_2_1_FW_FILE, + .otp = QCA6174_HW_2_1_OTP_FILE, + .board = QCA6174_HW_2_1_BOARD_DATA_FILE, + .board_size = QCA6174_BOARD_DATA_SZ, + .board_ext_size = QCA6174_BOARD_EXT_DATA_SZ, + }, + }, + { + .id = QCA6174_HW_3_0_VERSION, + .name = "qca6174 hw3.0", + .patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR, + .uart_pin = 6, + .fw = { + .dir = QCA6174_HW_3_0_FW_DIR, + .fw = QCA6174_HW_3_0_FW_FILE, + .otp = QCA6174_HW_3_0_OTP_FILE, + .board = QCA6174_HW_3_0_BOARD_DATA_FILE, + .board_size = QCA6174_BOARD_DATA_SZ, + .board_ext_size = QCA6174_BOARD_EXT_DATA_SZ, + }, + }, + { + .id = QCA6174_HW_3_2_VERSION, + .name = "qca6174 hw3.2", + .patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR, + .uart_pin = 6, + .fw = { + /* uses same binaries as hw3.0 */ + .dir = QCA6174_HW_3_0_FW_DIR, + .fw = QCA6174_HW_3_0_FW_FILE, + .otp = QCA6174_HW_3_0_OTP_FILE, + .board = QCA6174_HW_3_0_BOARD_DATA_FILE, + .board_size = QCA6174_BOARD_DATA_SZ, + .board_ext_size = QCA6174_BOARD_EXT_DATA_SZ, + }, + }, }; static void ath10k_send_suspend_complete(struct ath10k *ar) @@ -927,6 +970,7 @@ static int ath10k_core_init_firmware_features(struct ath10k *ar) case ATH10K_FW_WMI_OP_VERSION_TLV: ar->max_num_peers = TARGET_TLV_NUM_PEERS; ar->max_num_stations = TARGET_TLV_NUM_STATIONS; + ar->max_num_vdevs = TARGET_TLV_NUM_VDEVS; ar->htt.max_num_pending_tx = TARGET_TLV_NUM_MSDU_DESC; break; case ATH10K_FW_WMI_OP_VERSION_UNSET: @@ -1060,6 +1104,18 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode) goto err_hif_stop; } + /* If firmware indicates Full Rx Reorder support it must be used in a + * slightly different manner. Let HTT code know. + */ + ar->htt.rx_ring.in_ord_rx = !!(test_bit(WMI_SERVICE_RX_FULL_REORDER, + ar->wmi.svc_map)); + + status = ath10k_htt_rx_ring_refill(ar); + if (status) { + ath10k_err(ar, "failed to refill htt rx ring: %d\n", status); + goto err_hif_stop; + } + /* we don't care about HTT in UTF mode */ if (mode == ATH10K_FIRMWARE_MODE_NORMAL) { status = ath10k_htt_setup(&ar->htt); @@ -1295,6 +1351,7 @@ EXPORT_SYMBOL(ath10k_core_unregister); struct ath10k *ath10k_core_create(size_t priv_size, struct device *dev, enum ath10k_bus bus, + enum ath10k_hw_rev hw_rev, const struct ath10k_hif_ops *hif_ops) { struct ath10k *ar; @@ -1307,9 +1364,24 @@ struct ath10k *ath10k_core_create(size_t priv_size, struct device *dev, ar->ath_common.priv = ar; ar->ath_common.hw = ar->hw; ar->dev = dev; + ar->hw_rev = hw_rev; ar->hif.ops = hif_ops; ar->hif.bus = bus; + switch (hw_rev) { + case ATH10K_HW_QCA988X: + ar->regs = &qca988x_regs; + break; + case ATH10K_HW_QCA6174: + ar->regs = &qca6174_regs; + break; + default: + ath10k_err(ar, "unsupported core hardware revision %d\n", + hw_rev); + ret = -ENOTSUPP; + goto err_free_mac; + } + init_completion(&ar->scan.started); init_completion(&ar->scan.completed); init_completion(&ar->scan.on_channel); |