diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath10k/wmi.h')
| -rw-r--r-- | drivers/net/wireless/ath/ath10k/wmi.h | 3052 |
1 files changed, 3052 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h new file mode 100644 index 00000000000..9555f5a0e04 --- /dev/null +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -0,0 +1,3052 @@ +/* + * Copyright (c) 2005-2011 Atheros Communications Inc. + * Copyright (c) 2011-2013 Qualcomm Atheros, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _WMI_H_ +#define _WMI_H_ + +#include <linux/types.h> +#include <net/mac80211.h> + +/* + * This file specifies the WMI interface for the Unified Software + * Architecture. + * + * It includes definitions of all the commands and events. Commands are + * messages from the host to the target. Events and Replies are messages + * from the target to the host. + * + * Ownership of correctness in regards to WMI commands belongs to the host + * driver and the target is not required to validate parameters for value, + * proper range, or any other checking. + * + * Guidelines for extending this interface are below. + * + * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff + * + * 2. Use ONLY u32 type for defining member variables within WMI + * command/event structures. Do not use u8, u16, bool or + * enum types within these structures. + * + * 3. DO NOT define bit fields within structures. Implement bit fields + * using masks if necessary. Do not use the programming language's bit + * field definition. + * + * 4. Define macros for encode/decode of u8, u16 fields within + * the u32 variables. Use these macros for set/get of these fields. + * Try to use this to optimize the structure without bloating it with + * u32 variables for every lower sized field. + * + * 5. Do not use PACK/UNPACK attributes for the structures as each member + * variable is already 4-byte aligned by virtue of being a u32 + * type. + * + * 6. Comment each parameter part of the WMI command/event structure by + * using the 2 stars at the begining of C comment instead of one star to + * enable HTML document generation using Doxygen. + * + */ + +/* Control Path */ +struct wmi_cmd_hdr { + __le32 cmd_id; +} __packed; + +#define WMI_CMD_HDR_CMD_ID_MASK 0x00FFFFFF +#define WMI_CMD_HDR_CMD_ID_LSB 0 +#define WMI_CMD_HDR_PLT_PRIV_MASK 0xFF000000 +#define WMI_CMD_HDR_PLT_PRIV_LSB 24 + +#define HTC_PROTOCOL_VERSION 0x0002 +#define WMI_PROTOCOL_VERSION 0x0002 + +enum wmi_service_id { + WMI_SERVICE_BEACON_OFFLOAD = 0, /* beacon offload */ + WMI_SERVICE_SCAN_OFFLOAD, /* scan offload */ + WMI_SERVICE_ROAM_OFFLOAD, /* roam offload */ + WMI_SERVICE_BCN_MISS_OFFLOAD, /* beacon miss offload */ + WMI_SERVICE_STA_PWRSAVE, /* fake sleep + basic power save */ + WMI_SERVICE_STA_ADVANCED_PWRSAVE, /* uapsd, pspoll, force sleep */ + WMI_SERVICE_AP_UAPSD, /* uapsd on AP */ + WMI_SERVICE_AP_DFS, /* DFS on AP */ + WMI_SERVICE_11AC, /* supports 11ac */ + WMI_SERVICE_BLOCKACK, /* Supports triggering ADDBA/DELBA from host*/ + WMI_SERVICE_PHYERR, /* PHY error */ + WMI_SERVICE_BCN_FILTER, /* Beacon filter support */ + WMI_SERVICE_RTT, /* RTT (round trip time) support */ + WMI_SERVICE_RATECTRL, /* Rate-control */ + WMI_SERVICE_WOW, /* WOW Support */ + WMI_SERVICE_RATECTRL_CACHE, /* Rate-control caching */ + WMI_SERVICE_IRAM_TIDS, /* TIDs in IRAM */ + WMI_SERVICE_ARPNS_OFFLOAD, /* ARP NS Offload support */ + WMI_SERVICE_NLO, /* Network list offload service */ + WMI_SERVICE_GTK_OFFLOAD, /* GTK offload */ + WMI_SERVICE_SCAN_SCH, /* Scan Scheduler Service */ + WMI_SERVICE_CSA_OFFLOAD, /* CSA offload service */ + WMI_SERVICE_CHATTER, /* Chatter service */ + WMI_SERVICE_COEX_FREQAVOID, /* FW report freq range to avoid */ + WMI_SERVICE_PACKET_POWER_SAVE, /* packet power save service */ + WMI_SERVICE_FORCE_FW_HANG, /* To test fw recovery mechanism */ + WMI_SERVICE_GPIO, /* GPIO service */ + WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, /* Modulated DTIM support */ + WMI_STA_UAPSD_BASIC_AUTO_TRIG, /* UAPSD AC Trigger Generation */ + WMI_STA_UAPSD_VAR_AUTO_TRIG, /* -do- */ + WMI_SERVICE_STA_KEEP_ALIVE, /* STA keep alive mechanism support */ + WMI_SERVICE_TX_ENCAP, /* Packet type for TX encapsulation */ + + WMI_SERVICE_LAST, + WMI_MAX_SERVICE = 64 /* max service */ +}; + +static inline char *wmi_service_name(int service_id) +{ + switch (service_id) { + case WMI_SERVICE_BEACON_OFFLOAD: + return "BEACON_OFFLOAD"; + case WMI_SERVICE_SCAN_OFFLOAD: + return "SCAN_OFFLOAD"; + case WMI_SERVICE_ROAM_OFFLOAD: + return "ROAM_OFFLOAD"; + case WMI_SERVICE_BCN_MISS_OFFLOAD: + return "BCN_MISS_OFFLOAD"; + case WMI_SERVICE_STA_PWRSAVE: + return "STA_PWRSAVE"; + case WMI_SERVICE_STA_ADVANCED_PWRSAVE: + return "STA_ADVANCED_PWRSAVE"; + case WMI_SERVICE_AP_UAPSD: + return "AP_UAPSD"; + case WMI_SERVICE_AP_DFS: + return "AP_DFS"; + case WMI_SERVICE_11AC: + return "11AC"; + case WMI_SERVICE_BLOCKACK: + return "BLOCKACK"; + case WMI_SERVICE_PHYERR: + return "PHYERR"; + case WMI_SERVICE_BCN_FILTER: + return "BCN_FILTER"; + case WMI_SERVICE_RTT: + return "RTT"; + case WMI_SERVICE_RATECTRL: + return "RATECTRL"; + case WMI_SERVICE_WOW: + return "WOW"; + case WMI_SERVICE_RATECTRL_CACHE: + return "RATECTRL CACHE"; + case WMI_SERVICE_IRAM_TIDS: + return "IRAM TIDS"; + case WMI_SERVICE_ARPNS_OFFLOAD: + return "ARPNS_OFFLOAD"; + case WMI_SERVICE_NLO: + return "NLO"; + case WMI_SERVICE_GTK_OFFLOAD: + return "GTK_OFFLOAD"; + case WMI_SERVICE_SCAN_SCH: + return "SCAN_SCH"; + case WMI_SERVICE_CSA_OFFLOAD: + return "CSA_OFFLOAD"; + case WMI_SERVICE_CHATTER: + return "CHATTER"; + case WMI_SERVICE_COEX_FREQAVOID: + return "COEX_FREQAVOID"; + case WMI_SERVICE_PACKET_POWER_SAVE: + return "PACKET_POWER_SAVE"; + case WMI_SERVICE_FORCE_FW_HANG: + return "FORCE FW HANG"; + case WMI_SERVICE_GPIO: + return "GPIO"; + case WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM: + return "MODULATED DTIM"; + case WMI_STA_UAPSD_BASIC_AUTO_TRIG: + return "BASIC UAPSD"; + case WMI_STA_UAPSD_VAR_AUTO_TRIG: + return "VAR UAPSD"; + case WMI_SERVICE_STA_KEEP_ALIVE: + return "STA KEEP ALIVE"; + case WMI_SERVICE_TX_ENCAP: + return "TX ENCAP"; + default: + return "UNKNOWN SERVICE\n"; + } +} + + +#define WMI_SERVICE_BM_SIZE \ + ((WMI_MAX_SERVICE + sizeof(u32) - 1)/sizeof(u32)) + +/* 2 word representation of MAC addr */ +struct wmi_mac_addr { + union { + u8 addr[6]; + struct { + u32 word0; + u32 word1; + } __packed; + } __packed; +} __packed; + +/* macro to convert MAC address from WMI word format to char array */ +#define WMI_MAC_ADDR_TO_CHAR_ARRAY(pwmi_mac_addr, c_macaddr) do { \ + (c_macaddr)[0] = ((pwmi_mac_addr)->word0) & 0xff; \ + (c_macaddr)[1] = (((pwmi_mac_addr)->word0) >> 8) & 0xff; \ + (c_macaddr)[2] = (((pwmi_mac_addr)->word0) >> 16) & 0xff; \ + (c_macaddr)[3] = (((pwmi_mac_addr)->word0) >> 24) & 0xff; \ + (c_macaddr)[4] = ((pwmi_mac_addr)->word1) & 0xff; \ + (c_macaddr)[5] = (((pwmi_mac_addr)->word1) >> 8) & 0xff; \ + } while (0) + +/* + * wmi command groups. + */ +enum wmi_cmd_group { + /* 0 to 2 are reserved */ + WMI_GRP_START = 0x3, + WMI_GRP_SCAN = WMI_GRP_START, + WMI_GRP_PDEV, + WMI_GRP_VDEV, + WMI_GRP_PEER, + WMI_GRP_MGMT, + WMI_GRP_BA_NEG, + WMI_GRP_STA_PS, + WMI_GRP_DFS, + WMI_GRP_ROAM, + WMI_GRP_OFL_SCAN, + WMI_GRP_P2P, + WMI_GRP_AP_PS, + WMI_GRP_RATE_CTRL, + WMI_GRP_PROFILE, + WMI_GRP_SUSPEND, + WMI_GRP_BCN_FILTER, + WMI_GRP_WOW, + WMI_GRP_RTT, + WMI_GRP_SPECTRAL, + WMI_GRP_STATS, + WMI_GRP_ARP_NS_OFL, + WMI_GRP_NLO_OFL, + WMI_GRP_GTK_OFL, + WMI_GRP_CSA_OFL, + WMI_GRP_CHATTER, + WMI_GRP_TID_ADDBA, + WMI_GRP_MISC, + WMI_GRP_GPIO, +}; + +#define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1) +#define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1) + +/* Command IDs and commande events. */ +enum wmi_cmd_id { + WMI_INIT_CMDID = 0x1, + + /* Scan specific commands */ + WMI_START_SCAN_CMDID = WMI_CMD_GRP(WMI_GRP_SCAN), + WMI_STOP_SCAN_CMDID, + WMI_SCAN_CHAN_LIST_CMDID, + WMI_SCAN_SCH_PRIO_TBL_CMDID, + + /* PDEV (physical device) specific commands */ + WMI_PDEV_SET_REGDOMAIN_CMDID = WMI_CMD_GRP(WMI_GRP_PDEV), + WMI_PDEV_SET_CHANNEL_CMDID, + WMI_PDEV_SET_PARAM_CMDID, + WMI_PDEV_PKTLOG_ENABLE_CMDID, + WMI_PDEV_PKTLOG_DISABLE_CMDID, + WMI_PDEV_SET_WMM_PARAMS_CMDID, + WMI_PDEV_SET_HT_CAP_IE_CMDID, + WMI_PDEV_SET_VHT_CAP_IE_CMDID, + WMI_PDEV_SET_DSCP_TID_MAP_CMDID, + WMI_PDEV_SET_QUIET_MODE_CMDID, + WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID, + WMI_PDEV_GET_TPC_CONFIG_CMDID, + WMI_PDEV_SET_BASE_MACADDR_CMDID, + + /* VDEV (virtual device) specific commands */ + WMI_VDEV_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_VDEV), + WMI_VDEV_DELETE_CMDID, + WMI_VDEV_START_REQUEST_CMDID, + WMI_VDEV_RESTART_REQUEST_CMDID, + WMI_VDEV_UP_CMDID, + WMI_VDEV_STOP_CMDID, + WMI_VDEV_DOWN_CMDID, + WMI_VDEV_SET_PARAM_CMDID, + WMI_VDEV_INSTALL_KEY_CMDID, + + /* peer specific commands */ + WMI_PEER_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_PEER), + WMI_PEER_DELETE_CMDID, + WMI_PEER_FLUSH_TIDS_CMDID, + WMI_PEER_SET_PARAM_CMDID, + WMI_PEER_ASSOC_CMDID, + WMI_PEER_ADD_WDS_ENTRY_CMDID, + WMI_PEER_REMOVE_WDS_ENTRY_CMDID, + WMI_PEER_MCAST_GROUP_CMDID, + + /* beacon/management specific commands */ + WMI_BCN_TX_CMDID = WMI_CMD_GRP(WMI_GRP_MGMT), + WMI_PDEV_SEND_BCN_CMDID, + WMI_BCN_TMPL_CMDID, + WMI_BCN_FILTER_RX_CMDID, + WMI_PRB_REQ_FILTER_RX_CMDID, + WMI_MGMT_TX_CMDID, + WMI_PRB_TMPL_CMDID, + + /* commands to directly control BA negotiation directly from host. */ + WMI_ADDBA_CLEAR_RESP_CMDID = WMI_CMD_GRP(WMI_GRP_BA_NEG), + WMI_ADDBA_SEND_CMDID, + WMI_ADDBA_STATUS_CMDID, + WMI_DELBA_SEND_CMDID, + WMI_ADDBA_SET_RESP_CMDID, + WMI_SEND_SINGLEAMSDU_CMDID, + + /* Station power save specific config */ + WMI_STA_POWERSAVE_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_STA_PS), + WMI_STA_POWERSAVE_PARAM_CMDID, + WMI_STA_MIMO_PS_MODE_CMDID, + + /** DFS-specific commands */ + WMI_PDEV_DFS_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_DFS), + WMI_PDEV_DFS_DISABLE_CMDID, + + /* Roaming specific commands */ + WMI_ROAM_SCAN_MODE = WMI_CMD_GRP(WMI_GRP_ROAM), + WMI_ROAM_SCAN_RSSI_THRESHOLD, + WMI_ROAM_SCAN_PERIOD, + WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, + WMI_ROAM_AP_PROFILE, + + /* offload scan specific commands */ + WMI_OFL_SCAN_ADD_AP_PROFILE = WMI_CMD_GRP(WMI_GRP_OFL_SCAN), + WMI_OFL_SCAN_REMOVE_AP_PROFILE, + WMI_OFL_SCAN_PERIOD, + + /* P2P specific commands */ + WMI_P2P_DEV_SET_DEVICE_INFO = WMI_CMD_GRP(WMI_GRP_P2P), + WMI_P2P_DEV_SET_DISCOVERABILITY, + WMI_P2P_GO_SET_BEACON_IE, + WMI_P2P_GO_SET_PROBE_RESP_IE, + WMI_P2P_SET_VENDOR_IE_DATA_CMDID, + + /* AP power save specific config */ + WMI_AP_PS_PEER_PARAM_CMDID = WMI_CMD_GRP(WMI_GRP_AP_PS), + WMI_AP_PS_PEER_UAPSD_COEX_CMDID, + + /* Rate-control specific commands */ + WMI_PEER_RATE_RETRY_SCHED_CMDID = + WMI_CMD_GRP(WMI_GRP_RATE_CTRL), + + /* WLAN Profiling commands. */ + WMI_WLAN_PROFILE_TRIGGER_CMDID = WMI_CMD_GRP(WMI_GRP_PROFILE), + WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID, + WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, + WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, + WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, + + /* Suspend resume command Ids */ + WMI_PDEV_SUSPEND_CMDID = WMI_CMD_GRP(WMI_GRP_SUSPEND), + WMI_PDEV_RESUME_CMDID, + + /* Beacon filter commands */ + WMI_ADD_BCN_FILTER_CMDID = WMI_CMD_GRP(WMI_GRP_BCN_FILTER), + WMI_RMV_BCN_FILTER_CMDID, + + /* WOW Specific WMI commands*/ + WMI_WOW_ADD_WAKE_PATTERN_CMDID = WMI_CMD_GRP(WMI_GRP_WOW), + WMI_WOW_DEL_WAKE_PATTERN_CMDID, + WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, + WMI_WOW_ENABLE_CMDID, + WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, + + /* RTT measurement related cmd */ + WMI_RTT_MEASREQ_CMDID = WMI_CMD_GRP(WMI_GRP_RTT), + WMI_RTT_TSF_CMDID, + + /* spectral scan commands */ + WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID = WMI_CMD_GRP(WMI_GRP_SPECTRAL), + WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, + + /* F/W stats */ + WMI_REQUEST_STATS_CMDID = WMI_CMD_GRP(WMI_GRP_STATS), + + /* ARP OFFLOAD REQUEST*/ + WMI_SET_ARP_NS_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_ARP_NS_OFL), + + /* NS offload confid*/ + WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_NLO_OFL), + + /* GTK offload Specific WMI commands*/ + WMI_GTK_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_GTK_OFL), + + /* CSA offload Specific WMI commands*/ + WMI_CSA_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_CSA_OFL), + WMI_CSA_OFFLOAD_CHANSWITCH_CMDID, + + /* Chatter commands*/ + WMI_CHATTER_SET_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_CHATTER), + + /* addba specific commands */ + WMI_PEER_TID_ADDBA_CMDID = WMI_CMD_GRP(WMI_GRP_TID_ADDBA), + WMI_PEER_TID_DELBA_CMDID, + + /* set station mimo powersave method */ + WMI_STA_DTIM_PS_METHOD_CMDID, + /* Configure the Station UAPSD AC Auto Trigger Parameters */ + WMI_STA_UAPSD_AUTO_TRIG_CMDID, + + /* STA Keep alive parameter configuration, + Requires WMI_SERVICE_STA_KEEP_ALIVE */ + WMI_STA_KEEPALIVE_CMD, + + /* misc command group */ + WMI_ECHO_CMDID = WMI_CMD_GRP(WMI_GRP_MISC), + WMI_PDEV_UTF_CMDID, + WMI_DBGLOG_CFG_CMDID, + WMI_PDEV_QVIT_CMDID, + WMI_PDEV_FTM_INTG_CMDID, + WMI_VDEV_SET_KEEPALIVE_CMDID, + WMI_VDEV_GET_KEEPALIVE_CMDID, + + /* GPIO Configuration */ + WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_GPIO), + WMI_GPIO_OUTPUT_CMDID, +}; + +enum wmi_event_id { + WMI_SERVICE_READY_EVENTID = 0x1, + WMI_READY_EVENTID, + + /* Scan specific events */ + WMI_SCAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SCAN), + + /* PDEV specific events */ + WMI_PDEV_TPC_CONFIG_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PDEV), + WMI_CHAN_INFO_EVENTID, + WMI_PHYERR_EVENTID, + + /* VDEV specific events */ + WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV), + WMI_VDEV_STOPPED_EVENTID, + WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID, + + /* peer specific events */ + WMI_PEER_STA_KICKOUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PEER), + + /* beacon/mgmt specific events */ + WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT), + WMI_HOST_SWBA_EVENTID, + WMI_TBTTOFFSET_UPDATE_EVENTID, + + /* ADDBA Related WMI Events*/ + WMI_TX_DELBA_COMPLETE_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_BA_NEG), + WMI_TX_ADDBA_COMPLETE_EVENTID, + + /* Roam event to trigger roaming on host */ + WMI_ROAM_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_ROAM), + WMI_PROFILE_MATCH, + + /* WoW */ + WMI_WOW_WAKEUP_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_WOW), + + /* RTT */ + WMI_RTT_MEASUREMENT_REPORT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_RTT), + WMI_TSF_MEASUREMENT_REPORT_EVENTID, + WMI_RTT_ERROR_REPORT_EVENTID, + + /* GTK offload */ + WMI_GTK_OFFLOAD_STATUS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GTK_OFL), + WMI_GTK_REKEY_FAIL_EVENTID, + + /* CSA IE received event */ + WMI_CSA_HANDLING_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_CSA_OFL), + + /* Misc events */ + WMI_ECHO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MISC), + WMI_PDEV_UTF_EVENTID, + WMI_DEBUG_MESG_EVENTID, + WMI_UPDATE_STATS_EVENTID, + WMI_DEBUG_PRINT_EVENTID, + WMI_DCS_INTERFERENCE_EVENTID, + WMI_PDEV_QVIT_EVENTID, + WMI_WLAN_PROFILE_DATA_EVENTID, + WMI_PDEV_FTM_INTG_EVENTID, + WMI_WLAN_FREQ_AVOID_EVENTID, + WMI_VDEV_GET_KEEPALIVE_EVENTID, + + /* GPIO Event */ + WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO), +}; + +enum wmi_phy_mode { + MODE_11A = 0, /* 11a Mode */ + MODE_11G = 1, /* 11b/g Mode */ + MODE_11B = 2, /* 11b Mode */ + MODE_11GONLY = 3, /* 11g only Mode */ + MODE_11NA_HT20 = 4, /* 11a HT20 mode */ + MODE_11NG_HT20 = 5, /* 11g HT20 mode */ + MODE_11NA_HT40 = 6, /* 11a HT40 mode */ + MODE_11NG_HT40 = 7, /* 11g HT40 mode */ + MODE_11AC_VHT20 = 8, + MODE_11AC_VHT40 = 9, + MODE_11AC_VHT80 = 10, + /* MODE_11AC_VHT160 = 11, */ + MODE_11AC_VHT20_2G = 11, + MODE_11AC_VHT40_2G = 12, + MODE_11AC_VHT80_2G = 13, + MODE_UNKNOWN = 14, + MODE_MAX = 14 +}; + +#define WMI_CHAN_LIST_TAG 0x1 +#define WMI_SSID_LIST_TAG 0x2 +#define WMI_BSSID_LIST_TAG 0x3 +#define WMI_IE_TAG 0x4 + +struct wmi_channel { + __le32 mhz; + __le32 band_center_freq1; + __le32 band_center_freq2; /* valid for 11ac, 80plus80 */ + union { + __le32 flags; /* WMI_CHAN_FLAG_ */ + struct { + u8 mode; /* only 6 LSBs */ + } __packed; + } __packed; + union { + __le32 reginfo0; + struct { + u8 min_power; + u8 max_power; + u8 reg_power; + u8 reg_classid; + } __packed; + } __packed; + union { + __le32 reginfo1; + struct { + u8 antenna_max; + } __packed; + } __packed; +} __packed; + +struct wmi_channel_arg { + u32 freq; + u32 band_center_freq1; + bool passive; + bool allow_ibss; + bool allow_ht; + bool allow_vht; + bool ht40plus; + /* note: power unit is 1/4th of dBm */ + u32 min_power; + u32 max_power; + u32 max_reg_power; + u32 max_antenna_gain; + u32 reg_class_id; + enum wmi_phy_mode mode; +}; + +enum wmi_channel_change_cause { + WMI_CHANNEL_CHANGE_CAUSE_NONE = 0, + WMI_CHANNEL_CHANGE_CAUSE_CSA, +}; + +#define WMI_CHAN_FLAG_HT40_PLUS (1 << 6) +#define WMI_CHAN_FLAG_PASSIVE (1 << 7) +#define WMI_CHAN_FLAG_ADHOC_ALLOWED (1 << 8) +#define WMI_CHAN_FLAG_AP_DISABLED (1 << 9) +#define WMI_CHAN_FLAG_DFS (1 << 10) +#define WMI_CHAN_FLAG_ALLOW_HT (1 << 11) +#define WMI_CHAN_FLAG_ALLOW_VHT (1 << 12) + +/* Indicate reason for channel switch */ +#define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13) + +#define WMI_MAX_SPATIAL_STREAM 3 + +/* HT Capabilities*/ +#define WMI_HT_CAP_ENABLED 0x0001 /* HT Enabled/ disabled */ +#define WMI_HT_CAP_HT20_SGI 0x0002 /* Short Guard Interval with HT20 */ +#define WMI_HT_CAP_DYNAMIC_SMPS 0x0004 /* Dynamic MIMO powersave */ +#define WMI_HT_CAP_TX_STBC 0x0008 /* B3 TX STBC */ +#define WMI_HT_CAP_TX_STBC_MASK_SHIFT 3 +#define WMI_HT_CAP_RX_STBC 0x0030 /* B4-B5 RX STBC */ +#define WMI_HT_CAP_RX_STBC_MASK_SHIFT 4 +#define WMI_HT_CAP_LDPC 0x0040 /* LDPC supported */ +#define WMI_HT_CAP_L_SIG_TXOP_PROT 0x0080 /* L-SIG TXOP Protection */ +#define WMI_HT_CAP_MPDU_DENSITY 0x0700 /* MPDU Density */ +#define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8 +#define WMI_HT_CAP_HT40_SGI 0x0800 + +#define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED | \ + WMI_HT_CAP_HT20_SGI | \ + WMI_HT_CAP_HT40_SGI | \ + WMI_HT_CAP_TX_STBC | \ + WMI_HT_CAP_RX_STBC | \ + WMI_HT_CAP_LDPC) + + +/* + * WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information + * field. The fields not defined here are not supported, or reserved. + * Do not change these masks and if you have to add new one follow the + * bitmask as specified by 802.11ac draft. + */ + +#define WMI_VHT_CAP_MAX_MPDU_LEN_MASK 0x00000003 +#define WMI_VHT_CAP_RX_LDPC 0x00000010 +#define WMI_VHT_CAP_SGI_80MHZ 0x00000020 +#define WMI_VHT_CAP_TX_STBC 0x00000080 +#define WMI_VHT_CAP_RX_STBC_MASK 0x00000300 +#define WMI_VHT_CAP_RX_STBC_MASK_SHIFT 8 +#define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP 0x03800000 +#define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT 23 +#define WMI_VHT_CAP_RX_FIXED_ANT 0x10000000 +#define WMI_VHT_CAP_TX_FIXED_ANT 0x20000000 + +/* The following also refer for max HT AMSDU */ +#define WMI_VHT_CAP_MAX_MPDU_LEN_3839 0x00000000 +#define WMI_VHT_CAP_MAX_MPDU_LEN_7935 0x00000001 +#define WMI_VHT_CAP_MAX_MPDU_LEN_11454 0x00000002 + +#define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454 | \ + WMI_VHT_CAP_RX_LDPC | \ + WMI_VHT_CAP_SGI_80MHZ | \ + WMI_VHT_CAP_TX_STBC | \ + WMI_VHT_CAP_RX_STBC_MASK | \ + WMI_VHT_CAP_MAX_AMPDU_LEN_EXP | \ + WMI_VHT_CAP_RX_FIXED_ANT | \ + WMI_VHT_CAP_TX_FIXED_ANT) + +/* + * Interested readers refer to Rx/Tx MCS Map definition as defined in + * 802.11ac + */ +#define WMI_VHT_MAX_MCS_4_SS_MASK(r, ss) ((3 & (r)) << (((ss) - 1) << 1)) +#define WMI_VHT_MAX_SUPP_RATE_MASK 0x1fff0000 +#define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT 16 + +enum { + REGDMN_MODE_11A = 0x00001, /* 11a channels */ + REGDMN_MODE_TURBO = 0x00002, /* 11a turbo-only channels */ + REGDMN_MODE_11B = 0x00004, /* 11b channels */ + REGDMN_MODE_PUREG = 0x00008, /* 11g channels (OFDM only) */ + REGDMN_MODE_11G = 0x00008, /* XXX historical */ + REGDMN_MODE_108G = 0x00020, /* 11a+Turbo channels */ + REGDMN_MODE_108A = 0x00040, /* 11g+Turbo channels */ + REGDMN_MODE_XR = 0x00100, /* XR channels */ + REGDMN_MODE_11A_HALF_RATE = 0x00200, /* 11A half rate channels */ + REGDMN_MODE_11A_QUARTER_RATE = 0x00400, /* 11A quarter rate channels */ + REGDMN_MODE_11NG_HT20 = 0x00800, /* 11N-G HT20 channels */ + REGDMN_MODE_11NA_HT20 = 0x01000, /* 11N-A HT20 channels */ + REGDMN_MODE_11NG_HT40PLUS = 0x02000, /* 11N-G HT40 + channels */ + REGDMN_MODE_11NG_HT40MINUS = 0x04000, /* 11N-G HT40 - channels */ + REGDMN_MODE_11NA_HT40PLUS = 0x08000, /* 11N-A HT40 + channels */ + REGDMN_MODE_11NA_HT40MINUS = 0x10000, /* 11N-A HT40 - channels */ + REGDMN_MODE_11AC_VHT20 = 0x20000, /* 5Ghz, VHT20 */ + REGDMN_MODE_11AC_VHT40PLUS = 0x40000, /* 5Ghz, VHT40 + channels */ + REGDMN_MODE_11AC_VHT40MINUS = 0x80000, /* 5Ghz VHT40 - channels */ + REGDMN_MODE_11AC_VHT80 = 0x100000, /* 5Ghz, VHT80 channels */ + REGDMN_MODE_ALL = 0xffffffff +}; + +#define REGDMN_CAP1_CHAN_HALF_RATE 0x00000001 +#define REGDMN_CAP1_CHAN_QUARTER_RATE 0x00000002 +#define REGDMN_CAP1_CHAN_HAL49GHZ 0x00000004 + +/* regulatory capabilities */ +#define REGDMN_EEPROM_EEREGCAP_EN_FCC_MIDBAND 0x0040 +#define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_EVEN 0x0080 +#define REGDMN_EEPROM_EEREGCAP_EN_KK_U2 0x0100 +#define REGDMN_EEPROM_EEREGCAP_EN_KK_MIDBAND 0x0200 +#define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_ODD 0x0400 +#define REGDMN_EEPROM_EEREGCAP_EN_KK_NEW_11A 0x0800 + +struct hal_reg_capabilities { + /* regdomain value specified in EEPROM */ + __le32 eeprom_rd; + /*regdomain */ + __le32 eeprom_rd_ext; + /* CAP1 capabilities bit map. */ + __le32 regcap1; + /* REGDMN EEPROM CAP. */ + __le32 regcap2; + /* REGDMN MODE */ + __le32 wireless_modes; + __le32 low_2ghz_chan; + __le32 high_2ghz_chan; + __le32 low_5ghz_chan; + __le32 high_5ghz_chan; +} __packed; + +enum wlan_mode_capability { + WHAL_WLAN_11A_CAPABILITY = 0x1, + WHAL_WLAN_11G_CAPABILITY = 0x2, + WHAL_WLAN_11AG_CAPABILITY = 0x3, +}; + +/* structure used by FW for requesting host memory */ +struct wlan_host_mem_req { + /* ID of the request */ + __le32 req_id; + /* size of the of each unit */ + __le32 unit_size; + /* flags to indicate that + * the number units is dependent + * on number of resources(num vdevs num peers .. etc) + */ + __le32 num_unit_info; + /* + * actual number of units to allocate . if flags in the num_unit_info + * indicate that number of units is tied to number of a particular + * resource to allocate then num_units filed is set to 0 and host + * will derive the number units from number of the resources it is + * requesting. + */ + __le32 num_units; +} __packed; + +#define WMI_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id) \ + ((((wmi_svc_bmap)[(svc_id)/(sizeof(u32))]) & \ + (1 << ((svc_id)%(sizeof(u32))))) != 0) + +/* + * The following struct holds optional payload for + * wmi_service_ready_event,e.g., 11ac pass some of the + * device capability to the host. + */ +struct wmi_service_ready_event { + __le32 sw_version; + __le32 sw_version_1; + __le32 abi_version; + /* WMI_PHY_CAPABILITY */ + __le32 phy_capability; + /* Maximum number of frag table entries that SW will populate less 1 */ + __le32 max_frag_entry; + __le32 wmi_service_bitmap[WMI_SERVICE_BM_SIZE]; + __le32 num_rf_chains; + /* + * The following field is only valid for service type + * WMI_SERVICE_11AC + */ + __le32 ht_cap_info; /* WMI HT Capability */ + __le32 vht_cap_info; /* VHT capability info field of 802.11ac */ + __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */ + __le32 hw_min_tx_power; + __le32 hw_max_tx_power; + struct hal_reg_capabilities hal_reg_capabilities; + __le32 sys_cap_info; + __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */ + /* + * Max beacon and Probe Response IE offload size + * (includes optional P2P IEs) + */ + __le32 max_bcn_ie_size; + /* + * request to host to allocate a chuck of memory and pss it down to FW + * via WM_INIT. FW uses this as FW extesnsion memory for saving its + * data structures. Only valid for low latency interfaces like PCIE + * where FW can access this memory directly (or) by DMA. + */ + __le32 num_mem_reqs; + struct wlan_host_mem_req mem_reqs[1]; +} __packed; + +/* + * status consists of upper 16 bits fo int status and lower 16 bits of + * module ID that retuned status + */ +#define WLAN_INIT_STATUS_SUCCESS 0x0 +#define WLAN_GET_INIT_STATUS_REASON(status) ((status) & 0xffff) +#define WLAN_GET_INIT_STATUS_MODULE_ID(status) (((status) >> 16) & 0xffff) + +#define WMI_SERVICE_READY_TIMEOUT_HZ (5*HZ) +#define WMI_UNIFIED_READY_TIMEOUT_HZ (5*HZ) + +struct wmi_ready_event { + __le32 sw_version; + __le32 abi_version; + struct wmi_mac_addr mac_addr; + __le32 status; +} __packed; + +struct wmi_resource_config { + /* number of virtual devices (VAPs) to support */ + __le32 num_vdevs; + + /* number of peer nodes to support */ + __le32 num_peers; + + /* + * In offload mode target supports features like WOW, chatter and + * other protocol offloads. In order to support them some + * functionalities like reorder buffering, PN checking need to be + * done in target. This determines maximum number of peers suported + * by target in offload mode + */ + __le32 num_offload_peers; + + /* For target-based RX reordering */ + __le32 num_offload_reorder_bufs; + + /* number of keys per peer */ + __le32 num_peer_keys; + + /* total number of TX/RX data TIDs */ + __le32 num_tids; + + /* + * max skid for resolving hash collisions + * + * The address search table is sparse, so that if two MAC addresses + * result in the same hash value, the second of these conflicting + * entries can slide to the next index in the address search table, + * and use it, if it is unoccupied. This ast_skid_limit parameter + * specifies the upper bound on how many subsequent indices to search + * over to find an unoccupied space. + */ + __le32 ast_skid_limit; + + /* + * the nominal chain mask for transmit + * + * The chain mask may be modified dynamically, e.g. to operate AP + * tx with a reduced number of chains if no clients are associated. + * This configuration parameter specifies the nominal chain-mask that + * should be used when not operating with a reduced set of tx chains. + */ + __le32 tx_chain_mask; + + /* + * the nominal chain mask for receive + * + * The chain mask may be modified dynamically, e.g. for a client + * to use a reduced number of chains for receive if the traffic to + * the client is low enough that it doesn't require downlink MIMO + * or antenna diversity. + * This configuration parameter specifies the nominal chain-mask that + * should be used when not operating with a reduced set of rx chains. + */ + __le32 rx_chain_mask; + + /* + * what rx reorder timeout (ms) to use for the AC + * + * Each WMM access class (voice, video, best-effort, background) will + * have its own timeout value to dictate how long to wait for missing + * rx MPDUs to arrive before flushing subsequent MPDUs that have + * already been received. + * This parameter specifies the timeout in milliseconds for each + * class. + */ + __le32 rx_timeout_pri_vi; + __le32 rx_timeout_pri_vo; + __le32 rx_timeout_pri_be; + __le32 rx_timeout_pri_bk; + + /* + * what mode the rx should decap packets to + * + * MAC can decap to RAW (no decap), native wifi or Ethernet types + * THis setting also determines the default TX behavior, however TX + * behavior can be modified on a per VAP basis during VAP init + */ + __le32 rx_decap_mode; + + /* what is the maximum scan requests than can be queued */ + __le32 scan_max_pending_reqs; + + /* maximum VDEV that could use BMISS offload */ + __le32 bmiss_offload_max_vdev; + + /* maximum VDEV that could use offload roaming */ + __le32 roam_offload_max_vdev; + + /* maximum AP profiles that would push to offload roaming */ + __le32 roam_offload_max_ap_profiles; + + /* + * how many groups to use for mcast->ucast conversion + * + * The target's WAL maintains a table to hold information regarding + * which peers belong to a given multicast group, so that if + * multicast->unicast conversion is enabled, the target can convert + * multicast tx frames to a series of unicast tx frames, to each + * peer within the multicast group. + This num_mcast_groups configuration parameter tells the target how + * many multicast groups to provide storage for within its multicast + * group membership table. + */ + __le32 num_mcast_groups; + + /* + * size to alloc for the mcast membership table + * + * This num_mcast_table_elems configuration parameter tells the + * target how many peer elements it needs to provide storage for in + * its multicast group membership table. + * These multicast group membership table elements are shared by the + * multicast groups stored within the table. + */ + __le32 num_mcast_table_elems; + + /* + * whether/how to do multicast->unicast conversion + * + * This configuration parameter specifies whether the target should + * perform multicast --> unicast conversion on transmit, and if so, + * what to do if it finds no entries in its multicast group + * membership table for the multicast IP address in the tx frame. + * Configuration value: + * 0 -> Do not perform multicast to unicast conversion. + * 1 -> Convert multicast frames to unicast, if the IP multicast + * address from the tx frame is found in the multicast group + * membership table. If the IP multicast address is not found, + * drop the frame. + * 2 -> Convert multicast frames to unicast, if the IP multicast + * address from the tx frame is found in the multicast group + * membership table. If the IP multicast address is not found, + * transmit the frame as multicast. + */ + __le32 mcast2ucast_mode; + + /* + * how much memory to allocate for a tx PPDU dbg log + * + * This parameter controls how much memory the target will allocate + * to store a log of tx PPDU meta-information (how large the PPDU + * was, when it was sent, whether it was successful, etc.) + */ + __le32 tx_dbg_log_size; + + /* how many AST entries to be allocated for WDS */ + __le32 num_wds_entries; + + /* + * MAC DMA burst size, e.g., For target PCI limit can be + * 0 -default, 1 256B + */ + __le32 dma_burst_size; + + /* + * Fixed delimiters to be inserted after every MPDU to + * account for interface latency to avoid underrun. + */ + __le32 mac_aggr_delim; + + /* + * determine whether target is responsible for detecting duplicate + * non-aggregate MPDU and timing out stale fragments. + * + * A-MPDU reordering is always performed on the target. + * + * 0: target responsible for frag timeout and dup checking + * 1: host responsible for frag timeout and dup checking + */ + __le32 rx_skip_defrag_timeout_dup_detection_check; + + /* + * Configuration for VoW : + * No of Video Nodes to be supported + * and Max no of descriptors for each Video link (node). + */ + __le32 vow_config; + + /* maximum VDEV that could use GTK offload */ + __le32 gtk_offload_max_vdev; + + /* Number of msdu descriptors target should use */ + __le32 num_msdu_desc; + + /* + * Max. number of Tx fragments per MSDU + * This parameter controls the max number of Tx fragments per MSDU. + * This is sent by the target as part of the WMI_SERVICE_READY event + * and is overriden by the OS shim as required. + */ + __le32 max_frag_entries; +} __packed; + +/* strucutre describing host memory chunk. */ +struct host_memory_chunk { + /* id of the request that is passed up in service ready */ + __le32 req_id; + /* the physical address the memory chunk */ + __le32 ptr; + /* size of the chunk */ + __le32 size; +} __packed; + +struct wmi_init_cmd { + struct wmi_resource_config resource_config; + __le32 num_host_mem_chunks; + + /* + * variable number of host memory chunks. + * This should be the last element in the structure + */ + struct host_memory_chunk host_mem_chunks[1]; +} __packed; + +/* TLV for channel list */ +struct wmi_chan_list { + __le32 tag; /* WMI_CHAN_LIST_TAG */ + __le32 num_chan; + __le32 channel_list[0]; +} __packed; + +struct wmi_bssid_list { + __le32 tag; /* WMI_BSSID_LIST_TAG */ + __le32 num_bssid; + struct wmi_mac_addr bssid_list[0]; +} __packed; + +struct wmi_ie_data { + __le32 tag; /* WMI_IE_TAG */ + __le32 ie_len; + u8 ie_data[0]; +} __packed; + +struct wmi_ssid { + __le32 ssid_len; + u8 ssid[32]; +} __packed; + +struct wmi_ssid_list { + __le32 tag; /* WMI_SSID_LIST_TAG */ + __le32 num_ssids; + struct wmi_ssid ssids[0]; +} __packed; + +/* prefix used by scan requestor ids on the host */ +#define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000 + +/* prefix used by scan request ids generated on the host */ +/* host cycles through the lower 12 bits to generate ids */ +#define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000 + +#define WLAN_SCAN_PARAMS_MAX_SSID 16 +#define WLAN_SCAN_PARAMS_MAX_BSSID 4 +#define WLAN_SCAN_PARAMS_MAX_IE_LEN 256 + +/* Scan priority numbers must be sequential, starting with 0 */ +enum wmi_scan_priority { + WMI_SCAN_PRIORITY_VERY_LOW = 0, + WMI_SCAN_PRIORITY_LOW, + WMI_SCAN_PRIORITY_MEDIUM, + WMI_SCAN_PRIORITY_HIGH, + WMI_SCAN_PRIORITY_VERY_HIGH, + WMI_SCAN_PRIORITY_COUNT /* number of priorities supported */ +}; + +struct wmi_start_scan_cmd { + /* Scan ID */ + __le32 scan_id; + /* Scan requestor ID */ + __le32 scan_req_id; + /* VDEV id(interface) that is requesting scan */ + __le32 vdev_id; + /* Scan Priority, input to scan scheduler */ + __le32 scan_priority; + /* Scan events subscription */ + __le32 notify_scan_events; + /* dwell time in msec on active channels */ + __le32 dwell_time_active; + /* dwell time in msec on passive channels */ + __le32 dwell_time_passive; + /* + * min time in msec on the BSS channel,only valid if atleast one + * VDEV is active + */ + __le32 min_rest_time; + /* + * max rest time in msec on the BSS channel,only valid if at least + * one VDEV is active + */ + /* + * the scanner will rest on the bss channel at least min_rest_time + * after min_rest_time the scanner will start checking for tx/rx + * activity on all VDEVs. if there is no activity the scanner will + * switch to off channel. if there is activity the scanner will let + * the radio on the bss channel until max_rest_time expires.at + * max_rest_time scanner will switch to off channel irrespective of + * activity. activity is determined by the idle_time parameter. + */ + __le32 max_rest_time; + /* + * time before sending next set of probe requests. + * The scanner keeps repeating probe requests transmission with + * period specified by repeat_probe_time. + * The number of probe requests specified depends on the ssid_list + * and bssid_list + */ + __le32 repeat_probe_time; + /* time in msec between 2 consequetive probe requests with in a set. */ + __le32 probe_spacing_time; + /* + * data inactivity time in msec on bss channel that will be used by + * scanner for measuring the inactivity. + */ + __le32 idle_time; + /* maximum time in msec allowed for scan */ + __le32 max_scan_time; + /* + * delay in msec before sending first probe request after switching + * to a channel + */ + __le32 probe_delay; + /* Scan control flags */ + __le32 scan_ctrl_flags; + + /* Burst duration time in msecs */ + __le32 burst_duration; + /* + * TLV (tag length value ) paramerters follow the scan_cmd structure. + * TLV can contain channel list, bssid list, ssid list and + * ie. the TLV tags are defined above; + */ +} __packed; + +struct wmi_ssid_arg { + int len; + const u8 *ssid; +}; + +struct wmi_bssid_arg { + const u8 *bssid; +}; + +struct wmi_start_scan_arg { + u32 scan_id; + u32 scan_req_id; + u32 vdev_id; + u32 scan_priority; + u32 notify_scan_events; + u32 dwell_time_active; + u32 dwell_time_passive; + u32 min_rest_time; + u32 max_rest_time; + u32 repeat_probe_time; + u32 probe_spacing_time; + u32 idle_time; + u32 max_scan_time; + u32 probe_delay; + u32 scan_ctrl_flags; + + u32 ie_len; + u32 n_channels; + u32 n_ssids; + u32 n_bssids; + + u8 ie[WLAN_SCAN_PARAMS_MAX_IE_LEN]; + u32 channels[64]; + struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID]; + struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID]; +}; + +/* scan control flags */ + +/* passively scan all channels including active channels */ +#define WMI_SCAN_FLAG_PASSIVE 0x1 +/* add wild card ssid probe request even though ssid_list is specified. */ +#define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x2 +/* add cck rates to rates/xrate ie for the generated probe request */ +#define WMI_SCAN_ADD_CCK_RATES 0x4 +/* add ofdm rates to rates/xrate ie for the generated probe request */ +#define WMI_SCAN_ADD_OFDM_RATES 0x8 +/* To enable indication of Chan load and Noise floor to host */ +#define WMI_SCAN_CHAN_STAT_EVENT 0x10 +/* Filter Probe request frames */ +#define WMI_SCAN_FILTER_PROBE_REQ 0x20 +/* When set, DFS channels will not be scanned */ +#define WMI_SCAN_BYPASS_DFS_CHN 0x40 +/* Different FW scan engine may choose to bail out on errors. + * Allow the driver to have influence over that. */ +#define WMI_SCAN_CONTINUE_ON_ERROR 0x80 + +/* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */ +#define WMI_SCAN_CLASS_MASK 0xFF000000 + + +enum wmi_stop_scan_type { + WMI_SCAN_STOP_ONE = 0x00000000, /* stop by scan_id */ + WMI_SCAN_STOP_VDEV_ALL = 0x01000000, /* stop by vdev_id */ + WMI_SCAN_STOP_ALL = 0x04000000, /* stop all scans */ +}; + +struct wmi_stop_scan_cmd { + __le32 scan_req_id; + __le32 scan_id; + __le32 req_type; + __le32 vdev_id; +} __packed; + +struct wmi_stop_scan_arg { + u32 req_id; + enum wmi_stop_scan_type req_type; + union { + u32 scan_id; + u32 vdev_id; + } u; +}; + +struct wmi_scan_chan_list_cmd { + __le32 num_scan_chans; + struct wmi_channel chan_info[0]; +} __packed; + +struct wmi_scan_chan_list_arg { + u32 n_channels; + struct wmi_channel_arg *channels; +}; + +enum wmi_bss_filter { + WMI_BSS_FILTER_NONE = 0, /* no beacons forwarded */ + WMI_BSS_FILTER_ALL, /* all beacons forwarded */ + WMI_BSS_FILTER_PROFILE, /* only beacons matching profile */ + WMI_BSS_FILTER_ALL_BUT_PROFILE, /* all but beacons matching profile */ + WMI_BSS_FILTER_CURRENT_BSS, /* only beacons matching current BSS */ + WMI_BSS_FILTER_ALL_BUT_BSS, /* all but beacons matching BSS */ + WMI_BSS_FILTER_PROBED_SSID, /* beacons matching probed ssid */ + WMI_BSS_FILTER_LAST_BSS, /* marker only */ +}; + +enum wmi_scan_event_type { + WMI_SCAN_EVENT_STARTED = 0x1, + WMI_SCAN_EVENT_COMPLETED = 0x2, + WMI_SCAN_EVENT_BSS_CHANNEL = 0x4, + WMI_SCAN_EVENT_FOREIGN_CHANNEL = 0x8, + WMI_SCAN_EVENT_DEQUEUED = 0x10, + WMI_SCAN_EVENT_PREEMPTED = 0x20, /* possibly by high-prio scan */ + WMI_SCAN_EVENT_START_FAILED = 0x40, + WMI_SCAN_EVENT_RESTARTED = 0x80, + WMI_SCAN_EVENT_MAX = 0x8000 +}; + +enum wmi_scan_completion_reason { + WMI_SCAN_REASON_COMPLETED, + WMI_SCAN_REASON_CANCELLED, + WMI_SCAN_REASON_PREEMPTED, + WMI_SCAN_REASON_TIMEDOUT, + WMI_SCAN_REASON_MAX, +}; + +struct wmi_scan_event { + __le32 event_type; /* %WMI_SCAN_EVENT_ */ + __le32 reason; /* %WMI_SCAN_REASON_ */ + __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */ + __le32 scan_req_id; + __le32 scan_id; + __le32 vdev_id; +} __packed; + +/* + * This defines how much headroom is kept in the + * receive frame between the descriptor and the + * payload, in order for the WMI PHY error and + * management handler to insert header contents. + * + * This is in bytes. + */ +#define WMI_MGMT_RX_HDR_HEADROOM 52 + +/* + * This event will be used for sending scan results + * as well as rx mgmt frames to the host. The rx buffer + * will be sent as part of this WMI event. It would be a + * good idea to pass all the fields in the RX status + * descriptor up to the host. + */ +struct wmi_mgmt_rx_hdr { + __le32 channel; + __le32 snr; + __le32 rate; + __le32 phy_mode; + __le32 buf_len; + __le32 status; /* %WMI_RX_STATUS_ */ +} __packed; + +struct wmi_mgmt_rx_event { + struct wmi_mgmt_rx_hdr hdr; + u8 buf[0]; +} __packed; + +#define WMI_RX_STATUS_OK 0x00 +#define WMI_RX_STATUS_ERR_CRC 0x01 +#define WMI_RX_STATUS_ERR_DECRYPT 0x08 +#define WMI_RX_STATUS_ERR_MIC 0x10 +#define WMI_RX_STATUS_ERR_KEY_CACHE_MISS 0x20 + +struct wmi_single_phyerr_rx_hdr { + /* TSF timestamp */ + __le32 tsf_timestamp; + + /* + * Current freq1, freq2 + * + * [7:0]: freq1[lo] + * [15:8] : freq1[hi] + * [23:16]: freq2[lo] + * [31:24]: freq2[hi] + */ + __le16 freq1; + __le16 freq2; + + /* + * Combined RSSI over all chains and channel width for this PHY error + * + * [7:0]: RSSI combined + * [15:8]: Channel width (MHz) + * [23:16]: PHY error code + * [24:16]: reserved (future use) + */ + u8 rssi_combined; + u8 chan_width_mhz; + u8 phy_err_code; + u8 rsvd0; + + /* + * RSSI on chain 0 through 3 + * + * This is formatted the same as the PPDU_START RX descriptor + * field: + * + * [7:0]: pri20 + * [15:8]: sec20 + * [23:16]: sec40 + * [31:24]: sec80 + */ + + __le32 rssi_chain0; + __le32 rssi_chain1; + __le32 rssi_chain2; + __le32 rssi_chain3; + + /* + * Last calibrated NF value for chain 0 through 3 + * + * nf_list_1: + * + * + [15:0] - chain 0 + * + [31:16] - chain 1 + * + * nf_list_2: + * + * + [15:0] - chain 2 + * + [31:16] - chain 3 + */ + __le32 nf_list_1; + __le32 nf_list_2; + + + /* Length of the frame */ + __le32 buf_len; +} __packed; + +struct wmi_single_phyerr_rx_event { + /* Phy error event header */ + struct wmi_single_phyerr_rx_hdr hdr; + /* frame buffer */ + u8 bufp[0]; +} __packed; + +struct wmi_comb_phyerr_rx_hdr { + /* Phy error phy error count */ + __le32 num_phyerr_events; + __le32 tsf_l32; + __le32 tsf_u32; +} __packed; + +struct wmi_comb_phyerr_rx_event { + /* Phy error phy error count */ + struct wmi_comb_phyerr_rx_hdr hdr; + /* + * frame buffer - contains multiple payloads in the order: + * header - payload, header - payload... + * (The header is of type: wmi_single_phyerr_rx_hdr) + */ + u8 bufp[0]; +} __packed; + +struct wmi_mgmt_tx_hdr { + __le32 vdev_id; + struct wmi_mac_addr peer_macaddr; + __le32 tx_rate; + __le32 tx_power; + __le32 buf_len; +} __packed; + +struct wmi_mgmt_tx_cmd { + struct wmi_mgmt_tx_hdr hdr; + u8 buf[0]; +} __packed; + +struct wmi_echo_event { + __le32 value; +} __packed; + +struct wmi_echo_cmd { + __le32 value; +} __packed; + + +struct wmi_pdev_set_regdomain_cmd { + __le32 reg_domain; + __le32 reg_domain_2G; + __le32 reg_domain_5G; + __le32 conformance_test_limit_2G; + __le32 conformance_test_limit_5G; +} __packed; + +/* Command to set/unset chip in quiet mode */ +struct wmi_pdev_set_quiet_cmd { + /* period in TUs */ + __le32 period; + + /* duration in TUs */ + __le32 duration; + + /* offset in TUs */ + __le32 next_start; + + /* enable/disable */ + __le32 enabled; +} __packed; + + +/* + * 802.11g protection mode. + */ +enum ath10k_protmode { + ATH10K_PROT_NONE = 0, /* no protection */ + ATH10K_PROT_CTSONLY = 1, /* CTS to self */ + ATH10K_PROT_RTSCTS = 2, /* RTS-CTS */ +}; + +enum wmi_beacon_gen_mode { + WMI_BEACON_STAGGERED_MODE = 0, + WMI_BEACON_BURST_MODE = 1 +}; + +enum wmi_csa_event_ies_present_flag { + WMI_CSA_IE_PRESENT = 0x00000001, + WMI_XCSA_IE_PRESENT = 0x00000002, + WMI_WBW_IE_PRESENT = 0x00000004, + WMI_CSWARP_IE_PRESENT = 0x00000008, +}; + +/* wmi CSA receive event from beacon frame */ +struct wmi_csa_event { + __le32 i_fc_dur; + /* Bit 0-15: FC */ + /* Bit 16-31: DUR */ + struct wmi_mac_addr i_addr1; + struct wmi_mac_addr i_addr2; + __le32 csa_ie[2]; + __le32 xcsa_ie[2]; + __le32 wb_ie[2]; + __le32 cswarp_ie; + __le32 ies_present_flag; /* wmi_csa_event_ies_present_flag */ +} __packed; + +/* the definition of different PDEV parameters */ +#define PDEV_DEFAULT_STATS_UPDATE_PERIOD 500 +#define VDEV_DEFAULT_STATS_UPDATE_PERIOD 500 +#define PEER_DEFAULT_STATS_UPDATE_PERIOD 500 + +enum wmi_pdev_param { + /* TX chian mask */ + WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1, + /* RX chian mask */ + WMI_PDEV_PARAM_RX_CHAIN_MASK, + /* TX power limit for 2G Radio */ + WMI_PDEV_PARAM_TXPOWER_LIMIT2G, + /* TX power limit for 5G Radio */ + WMI_PDEV_PARAM_TXPOWER_LIMIT5G, + /* TX power scale */ + WMI_PDEV_PARAM_TXPOWER_SCALE, + /* Beacon generation mode . 0: host, 1: target */ + WMI_PDEV_PARAM_BEACON_GEN_MODE, + /* Beacon generation mode . 0: staggered 1: bursted */ + WMI_PDEV_PARAM_BEACON_TX_MODE, + /* + * Resource manager off chan mode . + * 0: turn off off chan mode. 1: turn on offchan mode + */ + WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE, + /* + * Protection mode: + * 0: no protection 1:use CTS-to-self 2: use RTS/CTS + */ + WMI_PDEV_PARAM_PROTECTION_MODE, + /* Dynamic bandwidth 0: disable 1: enable */ + WMI_PDEV_PARAM_DYNAMIC_BW, + /* Non aggregrate/ 11g sw retry threshold.0-disable */ + WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH, + /* aggregrate sw retry threshold. 0-disable*/ + WMI_PDEV_PARAM_AGG_SW_RETRY_TH, + /* Station kickout threshold (non of consecutive failures).0-disable */ + WMI_PDEV_PARAM_STA_KICKOUT_TH, + /* Aggerate size scaling configuration per AC */ + WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING, + /* LTR enable */ + WMI_PDEV_PARAM_LTR_ENABLE, + /* LTR latency for BE, in us */ + WMI_PDEV_PARAM_LTR_AC_LATENCY_BE, + /* LTR latency for BK, in us */ + WMI_PDEV_PARAM_LTR_AC_LATENCY_BK, + /* LTR latency for VI, in us */ + WMI_PDEV_PARAM_LTR_AC_LATENCY_VI, + /* LTR latency for VO, in us */ + WMI_PDEV_PARAM_LTR_AC_LATENCY_VO, + /* LTR AC latency timeout, in ms */ + WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, + /* LTR platform latency override, in us */ + WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE, + /* LTR-RX override, in us */ + WMI_PDEV_PARAM_LTR_RX_OVERRIDE, + /* Tx activity timeout for LTR, in us */ + WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, + /* L1SS state machine enable */ + WMI_PDEV_PARAM_L1SS_ENABLE, + /* Deep sleep state machine enable */ + WMI_PDEV_PARAM_DSLEEP_ENABLE, + /* RX buffering flush enable */ + WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH, + /* RX buffering matermark */ + WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK, + /* RX buffering timeout enable */ + WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN, + /* RX buffering timeout value */ + WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE, + /* pdev level stats update period in ms */ + WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, + /* vdev level stats update period in ms */ + WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, + /* peer level stats update period in ms */ + WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, + /* beacon filter status update period */ + WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, + /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */ + WMI_PDEV_PARAM_PMF_QOS, + /* Access category on which ARP frames are sent */ + WMI_PDEV_PARAM_ARP_AC_OVERRIDE, + /* DCS configuration */ + WMI_PDEV_PARAM_DCS, + /* Enable/Disable ANI on target */ + WMI_PDEV_PARAM_ANI_ENABLE, + /* configure the ANI polling period */ + WMI_PDEV_PARAM_ANI_POLL_PERIOD, + /* configure the ANI listening period */ + WMI_PDEV_PARAM_ANI_LISTEN_PERIOD, + /* configure OFDM immunity level */ + WMI_PDEV_PARAM_ANI_OFDM_LEVEL, + /* configure CCK immunity level */ + WMI_PDEV_PARAM_ANI_CCK_LEVEL, + /* Enable/Disable CDD for 1x1 STAs in rate control module */ + WMI_PDEV_PARAM_DYNTXCHAIN, + /* Enable/Disable proxy STA */ + WMI_PDEV_PARAM_PROXY_STA, + /* Enable/Disable low power state when all VDEVs are inactive/idle. */ + WMI_PDEV_PARAM_IDLE_PS_CONFIG, + /* Enable/Disable power gating sleep */ + WMI_PDEV_PARAM_POWER_GATING_SLEEP, +}; + +struct wmi_pdev_set_param_cmd { + __le32 param_id; + __le32 param_value; +} __packed; + +struct wmi_pdev_get_tpc_config_cmd { + /* parameter */ + __le32 param; +} __packed; + +#define WMI_TPC_RATE_MAX 160 +#define WMI_TPC_TX_N_CHAIN 4 + +enum wmi_tpc_config_event_flag { + WMI_TPC_CONFIG_EVENT_FLAG_TABLE_CDD = 0x1, + WMI_TPC_CONFIG_EVENT_FLAG_TABLE_STBC = 0x2, + WMI_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF = 0x4, +}; + +struct wmi_pdev_tpc_config_event { + __le32 reg_domain; + __le32 chan_freq; + __le32 phy_mode; + __le32 twice_antenna_reduction; + __le32 twice_max_rd_power; + s32 twice_antenna_gain; + __le32 power_limit; + __le32 rate_max; + __le32 num_tx_chain; + __le32 ctl; + __le32 flags; + s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN]; + s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; + s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; + s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; + u8 rates_array[WMI_TPC_RATE_MAX]; +} __packed; + +/* Transmit power scale factor. */ +enum wmi_tp_scale { + WMI_TP_SCALE_MAX = 0, /* no scaling (default) */ + WMI_TP_SCALE_50 = 1, /* 50% of max (-3 dBm) */ + WMI_TP_SCALE_25 = 2, /* 25% of max (-6 dBm) */ + WMI_TP_SCALE_12 = 3, /* 12% of max (-9 dBm) */ + WMI_TP_SCALE_MIN = 4, /* min, but still on */ + WMI_TP_SCALE_SIZE = 5, /* max num of enum */ +}; + +struct wmi_set_channel_cmd { + /* channel (only frequency and mode info are used) */ + struct wmi_channel chan; +} __packed; + +struct wmi_pdev_chanlist_update_event { + /* number of channels */ + __le32 num_chan; + /* array of channels */ + struct wmi_channel channel_list[1]; +} __packed; + +#define WMI_MAX_DEBUG_MESG (sizeof(u32) * 32) + +struct wmi_debug_mesg_event { + /* message buffer, NULL terminated */ + char bufp[WMI_MAX_DEBUG_MESG]; +} __packed; + +enum { + /* P2P device */ + VDEV_SUBTYPE_P2PDEV = 0, + /* P2P client */ + VDEV_SUBTYPE_P2PCLI, + /* P2P GO */ + VDEV_SUBTYPE_P2PGO, + /* BT3.0 HS */ + VDEV_SUBTYPE_BT, +}; + +struct wmi_pdev_set_channel_cmd { + /* idnore power , only use flags , mode and freq */ + struct wmi_channel chan; +} __packed; + +/* Customize the DSCP (bit) to TID (0-7) mapping for QOS */ +#define WMI_DSCP_MAP_MAX (64) +struct wmi_pdev_set_dscp_tid_map_cmd { + /* map indicating DSCP to TID conversion */ + __le32 dscp_to_tid_map[WMI_DSCP_MAP_MAX]; +} __packed; + +enum mcast_bcast_rate_id { + WMI_SET_MCAST_RATE, + WMI_SET_BCAST_RATE +}; + +struct mcast_bcast_rate { + enum mcast_bcast_rate_id rate_id; + __le32 rate; +} __packed; + +struct wmi_wmm_params { + __le32 cwmin; + __le32 cwmax; + __le32 aifs; + __le32 txop; + __le32 acm; + __le32 no_ack; +} __packed; + +struct wmi_pdev_set_wmm_params { + struct wmi_wmm_params ac_be; + struct wmi_wmm_params ac_bk; + struct wmi_wmm_params ac_vi; + struct wmi_wmm_params ac_vo; +} __packed; + +struct wmi_wmm_params_arg { + u32 cwmin; + u32 cwmax; + u32 aifs; + u32 txop; + u32 acm; + u32 no_ack; +}; + +struct wmi_pdev_set_wmm_params_arg { + struct wmi_wmm_params_arg ac_be; + struct wmi_wmm_params_arg ac_bk; + struct wmi_wmm_params_arg ac_vi; + struct wmi_wmm_params_arg ac_vo; +}; + +struct wal_dbg_tx_stats { + /* Num HTT cookies queued to dispatch list */ + __le32 comp_queued; + + /* Num HTT cookies dispatched */ + __le32 comp_delivered; + + /* Num MSDU queued to WAL */ + __le32 msdu_enqued; + + /* Num MPDU queue to WAL */ + __le32 mpdu_enqued; + + /* Num MSDUs dropped by WMM limit */ + __le32 wmm_drop; + + /* Num Local frames queued */ + __le32 local_enqued; + + /* Num Local frames done */ + __le32 local_freed; + + /* Num queued to HW */ + __le32 hw_queued; + + /* Num PPDU reaped from HW */ + __le32 hw_reaped; + + /* Num underruns */ + __le32 underrun; + + /* Num PPDUs cleaned up in TX abort */ + __le32 tx_abort; + + /* Num MPDUs requed by SW */ + __le32 mpdus_requed; + + /* excessive retries */ + __le32 tx_ko; + + /* data hw rate code */ + __le32 data_rc; + + /* Scheduler self triggers */ + __le32 self_triggers; + + /* frames dropped due to excessive sw retries */ + __le32 sw_retry_failure; + + /* illegal rate phy errors */ + __le32 illgl_rate_phy_err; + + /* wal pdev continous xretry */ + __le32 pdev_cont_xretry; + + /* wal pdev continous xretry */ + __le32 pdev_tx_timeout; + + /* wal pdev resets */ + __le32 pdev_resets; + + __le32 phy_underrun; + + /* MPDU is more than txop limit */ + __le32 txop_ovf; +} __packed; + +struct wal_dbg_rx_stats { + /* Cnts any change in ring routing mid-ppdu */ + __le32 mid_ppdu_route_change; + + /* Total number of statuses processed */ + __le32 status_rcvd; + + /* Extra frags on rings 0-3 */ + __le32 r0_frags; + __le32 r1_frags; + __le32 r2_frags; + __le32 r3_frags; + + /* MSDUs / MPDUs delivered to HTT */ + __le32 htt_msdus; + __le32 htt_mpdus; + + /* MSDUs / MPDUs delivered to local stack */ + __le32 loc_msdus; + __le32 loc_mpdus; + + /* AMSDUs that have more MSDUs than the status ring size */ + __le32 oversize_amsdu; + + /* Number of PHY errors */ + __le32 phy_errs; + + /* Number of PHY errors drops */ + __le32 phy_err_drop; + + /* Number of mpdu errors - FCS, MIC, ENC etc. */ + __le32 mpdu_errs; +} __packed; + +struct wal_dbg_peer_stats { + /* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */ + __le32 dummy; +} __packed; + +struct wal_dbg_stats { + struct wal_dbg_tx_stats tx; + struct wal_dbg_rx_stats rx; + struct wal_dbg_peer_stats peer; +} __packed; + +enum wmi_stats_id { + WMI_REQUEST_PEER_STAT = 0x01, + WMI_REQUEST_AP_STAT = 0x02 +}; + +struct wmi_request_stats_cmd { + __le32 stats_id; + + /* + * Space to add parameters like + * peer mac addr + */ +} __packed; + +/* Suspend option */ +enum { + /* suspend */ + WMI_PDEV_SUSPEND, + + /* suspend and disable all interrupts */ + WMI_PDEV_SUSPEND_AND_DISABLE_INTR, +}; + +struct wmi_pdev_suspend_cmd { + /* suspend option sent to target */ + __le32 suspend_opt; +} __packed; + +struct wmi_stats_event { + __le32 stats_id; /* %WMI_REQUEST_ */ + /* + * number of pdev stats event structures + * (wmi_pdev_stats) 0 or 1 + */ + __le32 num_pdev_stats; + /* + * number of vdev stats event structures + * (wmi_vdev_stats) 0 or max vdevs + */ + __le32 num_vdev_stats; + /* + * number of peer stats event structures + * (wmi_peer_stats) 0 or max peers + */ + __le32 num_peer_stats; + __le32 num_bcnflt_stats; + /* + * followed by + * num_pdev_stats * size of(struct wmi_pdev_stats) + * num_vdev_stats * size of(struct wmi_vdev_stats) + * num_peer_stats * size of(struct wmi_peer_stats) + * + * By having a zero sized array, the pointer to data area + * becomes available without increasing the struct size + */ + u8 data[0]; +} __packed; + +/* + * PDEV statistics + * TODO: add all PDEV stats here + */ +struct wmi_pdev_stats { + __le32 chan_nf; /* Channel noise floor */ + __le32 tx_frame_count; /* TX frame count */ + __le32 rx_frame_count; /* RX frame count */ + __le32 rx_clear_count; /* rx clear count */ + __le32 cycle_count; /* cycle count */ + __le32 phy_err_count; /* Phy error count */ + __le32 chan_tx_pwr; /* channel tx power */ + struct wal_dbg_stats wal; /* WAL dbg stats */ +} __packed; + +/* + * VDEV statistics + * TODO: add all VDEV stats here + */ +struct wmi_vdev_stats { + __le32 vdev_id; +} __packed; + +/* + * peer statistics. + * TODO: add more stats + */ +struct wmi_peer_stats { + struct wmi_mac_addr peer_macaddr; + __le32 peer_rssi; + __le32 peer_tx_rate; +} __packed; + +struct wmi_vdev_create_cmd { + __le32 vdev_id; + __le32 vdev_type; + __le32 vdev_subtype; + struct wmi_mac_addr vdev_macaddr; +} __packed; + +enum wmi_vdev_type { + WMI_VDEV_TYPE_AP = 1, + WMI_VDEV_TYPE_STA = 2, + WMI_VDEV_TYPE_IBSS = 3, + WMI_VDEV_TYPE_MONITOR = 4, +}; + +enum wmi_vdev_subtype { + WMI_VDEV_SUBTYPE_NONE = 0, + WMI_VDEV_SUBTYPE_P2P_DEVICE = 1, + WMI_VDEV_SUBTYPE_P2P_CLIENT = 2, + WMI_VDEV_SUBTYPE_P2P_GO = 3, +}; + +/* values for vdev_subtype */ + +/* values for vdev_start_request flags */ +/* + * Indicates that AP VDEV uses hidden ssid. only valid for + * AP/GO */ +#define WMI_VDEV_START_HIDDEN_SSID (1<<0) +/* + * Indicates if robust management frame/management frame + * protection is enabled. For GO/AP vdevs, it indicates that + * it may support station/client associations with RMF enabled. + * For STA/client vdevs, it indicates that sta will + * associate with AP with RMF enabled. */ +#define WMI_VDEV_START_PMF_ENABLED (1<<1) + +struct wmi_p2p_noa_descriptor { + __le32 type_count; /* 255: continuous schedule, 0: reserved */ + __le32 duration; /* Absent period duration in micro seconds */ + __le32 interval; /* Absent period interval in micro seconds */ + __le32 start_time; /* 32 bit tsf time when in starts */ +} __packed; + +struct wmi_vdev_start_request_cmd { + /* WMI channel */ + struct wmi_channel chan; + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; + /* requestor id identifying the caller module */ + __le32 requestor_id; + /* beacon interval from received beacon */ + __le32 beacon_interval; + /* DTIM Period from the received beacon */ + __le32 dtim_period; + /* Flags */ + __le32 flags; + /* ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */ + struct wmi_ssid ssid; + /* beacon/probe reponse xmit rate. Applicable for SoftAP. */ + __le32 bcn_tx_rate; + /* beacon/probe reponse xmit power. Applicable for SoftAP. */ + __le32 bcn_tx_power; + /* number of p2p NOA descriptor(s) from scan entry */ + __le32 num_noa_descriptors; + /* + * Disable H/W ack. This used by WMI_VDEV_RESTART_REQUEST_CMDID. + * During CAC, Our HW shouldn't ack ditected frames + */ + __le32 disable_hw_ack; + /* actual p2p NOA descriptor from scan entry */ + struct wmi_p2p_noa_descriptor noa_descriptors[2]; +} __packed; + +struct wmi_vdev_restart_request_cmd { + struct wmi_vdev_start_request_cmd vdev_start_request_cmd; +} __packed; + +struct wmi_vdev_start_request_arg { + u32 vdev_id; + struct wmi_channel_arg channel; + u32 bcn_intval; + u32 dtim_period; + u8 *ssid; + u32 ssid_len; + u32 bcn_tx_rate; + u32 bcn_tx_power; + bool disable_hw_ack; + bool hidden_ssid; + bool pmf_enabled; +}; + +struct wmi_vdev_delete_cmd { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; +} __packed; + +struct wmi_vdev_up_cmd { + __le32 vdev_id; + __le32 vdev_assoc_id; + struct wmi_mac_addr vdev_bssid; +} __packed; + +struct wmi_vdev_stop_cmd { + __le32 vdev_id; +} __packed; + +struct wmi_vdev_down_cmd { + __le32 vdev_id; +} __packed; + +struct wmi_vdev_standby_response_cmd { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; +} __packed; + +struct wmi_vdev_resume_response_cmd { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; +} __packed; + +struct wmi_vdev_set_param_cmd { + __le32 vdev_id; + __le32 param_id; + __le32 param_value; +} __packed; + +#define WMI_MAX_KEY_INDEX 3 +#define WMI_MAX_KEY_LEN 32 + +#define WMI_KEY_PAIRWISE 0x00 +#define WMI_KEY_GROUP 0x01 +#define WMI_KEY_TX_USAGE 0x02 /* default tx key - static wep */ + +struct wmi_key_seq_counter { + __le32 key_seq_counter_l; + __le32 key_seq_counter_h; +} __packed; + +#define WMI_CIPHER_NONE 0x0 /* clear key */ +#define WMI_CIPHER_WEP 0x1 +#define WMI_CIPHER_TKIP 0x2 +#define WMI_CIPHER_AES_OCB 0x3 +#define WMI_CIPHER_AES_CCM 0x4 +#define WMI_CIPHER_WAPI 0x5 +#define WMI_CIPHER_CKIP 0x6 +#define WMI_CIPHER_AES_CMAC 0x7 + +struct wmi_vdev_install_key_cmd { + __le32 vdev_id; + struct wmi_mac_addr peer_macaddr; + __le32 key_idx; + __le32 key_flags; + __le32 key_cipher; /* %WMI_CIPHER_ */ + struct wmi_key_seq_counter key_rsc_counter; + struct wmi_key_seq_counter key_global_rsc_counter; + struct wmi_key_seq_counter key_tsc_counter; + u8 wpi_key_rsc_counter[16]; + u8 wpi_key_tsc_counter[16]; + __le32 key_len; + __le32 key_txmic_len; + __le32 key_rxmic_len; + + /* contains key followed by tx mic followed by rx mic */ + u8 key_data[0]; +} __packed; + +struct wmi_vdev_install_key_arg { + u32 vdev_id; + const u8 *macaddr; + u32 key_idx; + u32 key_flags; + u32 key_cipher; + u32 key_len; + u32 key_txmic_len; + u32 key_rxmic_len; + const void *key_data; +}; + +/* Preamble types to be used with VDEV fixed rate configuration */ +enum wmi_rate_preamble { + WMI_RATE_PREAMBLE_OFDM, + WMI_RATE_PREAMBLE_CCK, + WMI_RATE_PREAMBLE_HT, + WMI_RATE_PREAMBLE_VHT, +}; + +/* Value to disable fixed rate setting */ +#define WMI_FIXED_RATE_NONE (0xff) + +/* the definition of different VDEV parameters */ +enum wmi_vdev_param { + /* RTS Threshold */ + WMI_VDEV_PARAM_RTS_THRESHOLD = 0x1, + /* Fragmentation threshold */ + WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD, + /* beacon interval in TUs */ + WMI_VDEV_PARAM_BEACON_INTERVAL, + /* Listen interval in TUs */ + WMI_VDEV_PARAM_LISTEN_INTERVAL, + /* muticast rate in Mbps */ + WMI_VDEV_PARAM_MULTICAST_RATE, + /* management frame rate in Mbps */ + WMI_VDEV_PARAM_MGMT_TX_RATE, + /* slot time (long vs short) */ + WMI_VDEV_PARAM_SLOT_TIME, + /* preamble (long vs short) */ + WMI_VDEV_PARAM_PREAMBLE, + /* SWBA time (time before tbtt in msec) */ + WMI_VDEV_PARAM_SWBA_TIME, + /* time period for updating VDEV stats */ + WMI_VDEV_STATS_UPDATE_PERIOD, + /* age out time in msec for frames queued for station in power save */ + WMI_VDEV_PWRSAVE_AGEOUT_TIME, + /* + * Host SWBA interval (time in msec before tbtt for SWBA event + * generation). + */ + WMI_VDEV_HOST_SWBA_INTERVAL, + /* DTIM period (specified in units of num beacon intervals) */ + WMI_VDEV_PARAM_DTIM_PERIOD, + /* + * scheduler air time limit for this VDEV. used by off chan + * scheduler. + */ + WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, + /* enable/dsiable WDS for this VDEV */ + WMI_VDEV_PARAM_WDS, + /* ATIM Window */ + WMI_VDEV_PARAM_ATIM_WINDOW, + /* BMISS max */ + WMI_VDEV_PARAM_BMISS_COUNT_MAX, + /* BMISS first time */ + WMI_VDEV_PARAM_BMISS_FIRST_BCNT, + /* BMISS final time */ + WMI_VDEV_PARAM_BMISS_FINAL_BCNT, + /* WMM enables/disabled */ + WMI_VDEV_PARAM_FEATURE_WMM, + /* Channel width */ + WMI_VDEV_PARAM_CHWIDTH, + /* Channel Offset */ + WMI_VDEV_PARAM_CHEXTOFFSET, + /* Disable HT Protection */ + WMI_VDEV_PARAM_DISABLE_HTPROTECTION, + /* Quick STA Kickout */ + WMI_VDEV_PARAM_STA_QUICKKICKOUT, + /* Rate to be used with Management frames */ + WMI_VDEV_PARAM_MGMT_RATE, + /* Protection Mode */ + WMI_VDEV_PARAM_PROTECTION_MODE, + /* Fixed rate setting */ + WMI_VDEV_PARAM_FIXED_RATE, + /* Short GI Enable/Disable */ + WMI_VDEV_PARAM_SGI, + /* Enable LDPC */ + WMI_VDEV_PARAM_LDPC, + /* Enable Tx STBC */ + WMI_VDEV_PARAM_TX_STBC, + /* Enable Rx STBC */ + WMI_VDEV_PARAM_RX_STBC, + /* Intra BSS forwarding */ + WMI_VDEV_PARAM_INTRA_BSS_FWD, + /* Setting Default xmit key for Vdev */ + WMI_VDEV_PARAM_DEF_KEYID, + /* NSS width */ + WMI_VDEV_PARAM_NSS, + /* Set the custom rate for the broadcast data frames */ + WMI_VDEV_PARAM_BCAST_DATA_RATE, + /* Set the custom rate (rate-code) for multicast data frames */ + WMI_VDEV_PARAM_MCAST_DATA_RATE, + /* Tx multicast packet indicate Enable/Disable */ + WMI_VDEV_PARAM_MCAST_INDICATE, + /* Tx DHCP packet indicate Enable/Disable */ + WMI_VDEV_PARAM_DHCP_INDICATE, + /* Enable host inspection of Tx unicast packet to unknown destination */ + WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE, + + /* The minimum amount of time AP begins to consider STA inactive */ + WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, + + /* + * An associated STA is considered inactive when there is no recent + * TX/RX activity and no downlink frames are buffered for it. Once a + * STA exceeds the maximum idle inactive time, the AP will send an + * 802.11 data-null as a keep alive to verify the STA is still + * associated. If the STA does ACK the data-null, or if the data-null + * is buffered and the STA does not retrieve it, the STA will be + * considered unresponsive + * (see WMI_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS). + */ + WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, + + /* + * An associated STA is considered unresponsive if there is no recent + * TX/RX activity and downlink frames are buffered for it. Once a STA + * exceeds the maximum unresponsive time, the AP will send a + * WMI_STA_KICKOUT event to the host so the STA can be deleted. */ + WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, + + /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */ + WMI_VDEV_PARAM_AP_ENABLE_NAWDS, + /* Enable/Disable RTS-CTS */ + WMI_VDEV_PARAM_ENABLE_RTSCTS, + /* Enable TXBFee/er */ + WMI_VDEV_PARAM_TXBF, + + /* Set packet power save */ + WMI_VDEV_PARAM_PACKET_POWERSAVE, + + /* + * Drops un-encrypted packets if eceived in an encrypted connection + * otherwise forwards to host. + */ + WMI_VDEV_PARAM_DROP_UNENCRY, + + /* + * Set the encapsulation type for frames. + */ + WMI_VDEV_PARAM_TX_ENCAP_TYPE, +}; + +/* slot time long */ +#define WMI_VDEV_SLOT_TIME_LONG 0x1 +/* slot time short */ +#define WMI_VDEV_SLOT_TIME_SHORT 0x2 +/* preablbe long */ +#define WMI_VDEV_PREAMBLE_LONG 0x1 +/* preablbe short */ +#define WMI_VDEV_PREAMBLE_SHORT 0x2 + +enum wmi_start_event_param { + WMI_VDEV_RESP_START_EVENT = 0, + WMI_VDEV_RESP_RESTART_EVENT, +}; + +struct wmi_vdev_start_response_event { + __le32 vdev_id; + __le32 req_id; + __le32 resp_type; /* %WMI_VDEV_RESP_ */ + __le32 status; +} __packed; + +struct wmi_vdev_standby_req_event { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; +} __packed; + +struct wmi_vdev_resume_req_event { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; +} __packed; + +struct wmi_vdev_stopped_event { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; +} __packed; + +/* + * common structure used for simple events + * (stopped, resume_req, standby response) + */ +struct wmi_vdev_simple_event { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; +} __packed; + +/* VDEV start response status codes */ +/* VDEV succesfully started */ +#define WMI_INIFIED_VDEV_START_RESPONSE_STATUS_SUCCESS 0x0 + +/* requested VDEV not found */ +#define WMI_INIFIED_VDEV_START_RESPONSE_INVALID_VDEVID 0x1 + +/* unsupported VDEV combination */ +#define WMI_INIFIED_VDEV_START_RESPONSE_NOT_SUPPORTED 0x2 + +/* Beacon processing related command and event structures */ +struct wmi_bcn_tx_hdr { + __le32 vdev_id; + __le32 tx_rate; + __le32 tx_power; + __le32 bcn_len; +} __packed; + +struct wmi_bcn_tx_cmd { + struct wmi_bcn_tx_hdr hdr; + u8 *bcn[0]; +} __packed; + +struct wmi_bcn_tx_arg { + u32 vdev_id; + u32 tx_rate; + u32 tx_power; + u32 bcn_len; + const void *bcn; +}; + +/* Beacon filter */ +#define WMI_BCN_FILTER_ALL 0 /* Filter all beacons */ +#define WMI_BCN_FILTER_NONE 1 /* Pass all beacons */ +#define WMI_BCN_FILTER_RSSI 2 /* Pass Beacons RSSI >= RSSI threshold */ +#define WMI_BCN_FILTER_BSSID 3 /* Pass Beacons with matching BSSID */ +#define WMI_BCN_FILTER_SSID 4 /* Pass Beacons with matching SSID */ + +struct wmi_bcn_filter_rx_cmd { + /* Filter ID */ + __le32 bcn_filter_id; + /* Filter type - wmi_bcn_filter */ + __le32 bcn_filter; + /* Buffer len */ + __le32 bcn_filter_len; + /* Filter info (threshold, BSSID, RSSI) */ + u8 *bcn_filter_buf; +} __packed; + +/* Capabilities and IEs to be passed to firmware */ +struct wmi_bcn_prb_info { + /* Capabilities */ + __le32 caps; + /* ERP info */ + __le32 erp; + /* Advanced capabilities */ + /* HT capabilities */ + /* HT Info */ + /* ibss_dfs */ + /* wpa Info */ + /* rsn Info */ + /* rrm info */ + /* ath_ext */ + /* app IE */ +} __packed; + +struct wmi_bcn_tmpl_cmd { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; + /* TIM IE offset from the beginning of the template. */ + __le32 tim_ie_offset; + /* beacon probe capabilities and IEs */ + struct wmi_bcn_prb_info bcn_prb_info; + /* beacon buffer length */ + __le32 buf_len; + /* variable length data */ + u8 data[1]; +} __packed; + +struct wmi_prb_tmpl_cmd { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; + /* beacon probe capabilities and IEs */ + struct wmi_bcn_prb_info bcn_prb_info; + /* beacon buffer length */ + __le32 buf_len; + /* Variable length data */ + u8 data[1]; +} __packed; + +enum wmi_sta_ps_mode { + /* enable power save for the given STA VDEV */ + WMI_STA_PS_MODE_DISABLED = 0, + /* disable power save for a given STA VDEV */ + WMI_STA_PS_MODE_ENABLED = 1, +}; + +struct wmi_sta_powersave_mode_cmd { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; + + /* + * Power save mode + * (see enum wmi_sta_ps_mode) + */ + __le32 sta_ps_mode; +} __packed; + +enum wmi_csa_offload_en { + WMI_CSA_OFFLOAD_DISABLE = 0, + WMI_CSA_OFFLOAD_ENABLE = 1, +}; + +struct wmi_csa_offload_enable_cmd { + __le32 vdev_id; + __le32 csa_offload_enable; +} __packed; + +struct wmi_csa_offload_chanswitch_cmd { + __le32 vdev_id; + struct wmi_channel chan; +} __packed; + +/* + * This parameter controls the policy for retrieving frames from AP while the + * STA is in sleep state. + * + * Only takes affect if the sta_ps_mode is enabled + */ +enum wmi_sta_ps_param_rx_wake_policy { + /* + * Wake up when ever there is an RX activity on the VDEV. In this mode + * the Power save SM(state machine) will come out of sleep by either + * sending null frame (or) a data frame (with PS==0) in response to TIM + * bit set in the received beacon frame from AP. + */ + WMI_STA_PS_RX_WAKE_POLICY_WAKE = 0, + + /* + * Here the power save state machine will not wakeup in response to TIM + * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD + * configuration setup by WMISET_PS_SET_UAPSD WMI command. When all + * access categories are delivery-enabled, the station will send a + * UAPSD trigger frame, otherwise it will send a PS-Poll. + */ + WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1, +}; + +/* + * Number of tx frames/beacon that cause the power save SM to wake up. + * + * Value 1 causes the SM to wake up for every TX. Value 0 has a special + * meaning, It will cause the SM to never wake up. This is useful if you want + * to keep the system to sleep all the time for some kind of test mode . host + * can change this parameter any time. It will affect at the next tx frame. + */ +enum wmi_sta_ps_param_tx_wake_threshold { + WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0, + WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1, + + /* + * Values greater than one indicate that many TX attempts per beacon + * interval before the STA will wake up + */ +}; + +/* + * The maximum number of PS-Poll frames the FW will send in response to + * traffic advertised in TIM before waking up (by sending a null frame with PS + * = 0). Value 0 has a special meaning: there is no maximum count and the FW + * will send as many PS-Poll as are necessary to retrieve buffered BU. This + * parameter is used when the RX wake policy is + * WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD and ignored when the RX wake + * policy is WMI_STA_PS_RX_WAKE_POLICY_WAKE. + */ +enum wmi_sta_ps_param_pspoll_count { + WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0, + /* + * Values greater than 0 indicate the maximum numer of PS-Poll frames + * FW will send before waking up. + */ +}; + +/* + * This will include the delivery and trigger enabled state for every AC. + * This is the negotiated state with AP. The host MLME needs to set this based + * on AP capability and the state Set in the association request by the + * station MLME.Lower 8 bits of the value specify the UAPSD configuration. + */ +#define WMI_UAPSD_AC_TYPE_DELI 0 +#define WMI_UAPSD_AC_TYPE_TRIG 1 + +#define WMI_UAPSD_AC_BIT_MASK(ac, type) \ + ((type == WMI_UAPSD_AC_TYPE_DELI) ? (1<<(ac<<1)) : (1<<((ac<<1)+1))) + +enum wmi_sta_ps_param_uapsd { + WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), + WMI_STA_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), + WMI_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), + WMI_STA_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), + WMI_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), + WMI_STA_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), + WMI_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), + WMI_STA_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), +}; + +enum wmi_sta_powersave_param { + /* + * Controls how frames are retrievd from AP while STA is sleeping + * + * (see enum wmi_sta_ps_param_rx_wake_policy) + */ + WMI_STA_PS_PARAM_RX_WAKE_POLICY = 0, + + /* + * The STA will go active after this many TX + * + * (see enum wmi_sta_ps_param_tx_wake_threshold) + */ + WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1, + + /* + * Number of PS-Poll to send before STA wakes up + * + * (see enum wmi_sta_ps_param_pspoll_count) + * + */ + WMI_STA_PS_PARAM_PSPOLL_COUNT = 2, + + /* + * TX/RX inactivity time in msec before going to sleep. + * + * The power save SM will monitor tx/rx activity on the VDEV, if no + * activity for the specified msec of the parameter the Power save + * SM will go to sleep. + */ + WMI_STA_PS_PARAM_INACTIVITY_TIME = 3, + + /* + * Set uapsd configuration. + * + * (see enum wmi_sta_ps_param_uapsd) + */ + WMI_STA_PS_PARAM_UAPSD = 4, +}; + +struct wmi_sta_powersave_param_cmd { + __le32 vdev_id; + __le32 param_id; /* %WMI_STA_PS_PARAM_ */ + __le32 param_value; +} __packed; + +/* No MIMO power save */ +#define WMI_STA_MIMO_PS_MODE_DISABLE +/* mimo powersave mode static*/ +#define WMI_STA_MIMO_PS_MODE_STATIC +/* mimo powersave mode dynamic */ +#define WMI_STA_MIMO_PS_MODE_DYNAMIC + +struct wmi_sta_mimo_ps_mode_cmd { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; + /* mimo powersave mode as defined above */ + __le32 mimo_pwrsave_mode; +} __packed; + +/* U-APSD configuration of peer station from (re)assoc request and TSPECs */ +enum wmi_ap_ps_param_uapsd { + WMI_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), + WMI_AP_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), + WMI_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), + WMI_AP_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), + WMI_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), + WMI_AP_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), + WMI_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), + WMI_AP_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), +}; + +/* U-APSD maximum service period of peer station */ +enum wmi_ap_ps_peer_param_max_sp { + WMI_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0, + WMI_AP_PS_PEER_PARAM_MAX_SP_2 = 1, + WMI_AP_PS_PEER_PARAM_MAX_SP_4 = 2, + WMI_AP_PS_PEER_PARAM_MAX_SP_6 = 3, + MAX_WMI_AP_PS_PEER_PARAM_MAX_SP, +}; + +/* + * AP power save parameter + * Set a power save specific parameter for a peer station + */ +enum wmi_ap_ps_peer_param { + /* Set uapsd configuration for a given peer. + * + * Include the delivery and trigger enabled state for every AC. + * The host MLME needs to set this based on AP capability and stations + * request Set in the association request received from the station. + * + * Lower 8 bits of the value specify the UAPSD configuration. + * + * (see enum wmi_ap_ps_param_uapsd) + * The default value is 0. + */ + WMI_AP_PS_PEER_PARAM_UAPSD = 0, + + /* + * Set the service period for a UAPSD capable station + * + * The service period from wme ie in the (re)assoc request frame. + * + * (see enum wmi_ap_ps_peer_param_max_sp) + */ + WMI_AP_PS_PEER_PARAM_MAX_SP = 1, + + /* Time in seconds for aging out buffered frames for STA in PS */ + WMI_AP_PS_PEER_PARAM_AGEOUT_TIME = 2, +}; + +struct wmi_ap_ps_peer_cmd { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; + + /* peer MAC address */ + struct wmi_mac_addr peer_macaddr; + + /* AP powersave param (see enum wmi_ap_ps_peer_param) */ + __le32 param_id; + + /* AP powersave param value */ + __le32 param_value; +} __packed; + +/* 128 clients = 4 words */ +#define WMI_TIM_BITMAP_ARRAY_SIZE 4 + +struct wmi_tim_info { + __le32 tim_len; + __le32 tim_mcast; + __le32 tim_bitmap[WMI_TIM_BITMAP_ARRAY_SIZE]; + __le32 tim_changed; + __le32 tim_num_ps_pending; +} __packed; + +/* Maximum number of NOA Descriptors supported */ +#define WMI_P2P_MAX_NOA_DESCRIPTORS 4 +#define WMI_P2P_OPPPS_ENABLE_BIT BIT(0) +#define WMI_P2P_OPPPS_CTWINDOW_OFFSET 1 +#define WMI_P2P_NOA_CHANGED_BIT BIT(0) + +struct wmi_p2p_noa_info { + /* Bit 0 - Flag to indicate an update in NOA schedule + Bits 7-1 - Reserved */ + u8 changed; + /* NOA index */ + u8 index; + /* Bit 0 - Opp PS state of the AP + Bits 1-7 - Ctwindow in TUs */ + u8 ctwindow_oppps; + /* Number of NOA descriptors */ + u8 num_descriptors; + + struct wmi_p2p_noa_descriptor descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS]; +} __packed; + +struct wmi_bcn_info { + struct wmi_tim_info tim_info; + struct wmi_p2p_noa_info p2p_noa_info; +} __packed; + +struct wmi_host_swba_event { + __le32 vdev_map; + struct wmi_bcn_info bcn_info[1]; +} __packed; + +#define WMI_MAX_AP_VDEV 16 + +struct wmi_tbtt_offset_event { + __le32 vdev_map; + __le32 tbttoffset_list[WMI_MAX_AP_VDEV]; +} __packed; + + +struct wmi_peer_create_cmd { + __le32 vdev_id; + struct wmi_mac_addr peer_macaddr; +} __packed; + +struct wmi_peer_delete_cmd { + __le32 vdev_id; + struct wmi_mac_addr peer_macaddr; +} __packed; + +struct wmi_peer_flush_tids_cmd { + __le32 vdev_id; + struct wmi_mac_addr peer_macaddr; + __le32 peer_tid_bitmap; +} __packed; + +struct wmi_fixed_rate { + /* + * rate mode . 0: disable fixed rate (auto rate) + * 1: legacy (non 11n) rate specified as ieee rate 2*Mbps + * 2: ht20 11n rate specified as mcs index + * 3: ht40 11n rate specified as mcs index + */ + __le32 rate_mode; + /* + * 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB) + * and series 3 is stored at byte 3 (MSB) + */ + __le32 rate_series; + /* + * 4 retry counts for 4 rate series. retry count for rate 0 is stored + * in byte 0 (LSB) and retry count for rate 3 is stored at byte 3 + * (MSB) + */ + __le32 rate_retries; +} __packed; + +struct wmi_peer_fixed_rate_cmd { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; + /* peer MAC address */ + struct wmi_mac_addr peer_macaddr; + /* fixed rate */ + struct wmi_fixed_rate peer_fixed_rate; +} __packed; + +#define WMI_MGMT_TID 17 + +struct wmi_addba_clear_resp_cmd { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; + /* peer MAC address */ + struct wmi_mac_addr peer_macaddr; +} __packed; + +struct wmi_addba_send_cmd { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; + /* peer MAC address */ + struct wmi_mac_addr peer_macaddr; + /* Tid number */ + __le32 tid; + /* Buffer/Window size*/ + __le32 buffersize; +} __packed; + +struct wmi_delba_send_cmd { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; + /* peer MAC address */ + struct wmi_mac_addr peer_macaddr; + /* Tid number */ + __le32 tid; + /* Is Initiator */ + __le32 initiator; + /* Reason code */ + __le32 reasoncode; +} __packed; + +struct wmi_addba_setresponse_cmd { + /* unique id identifying the vdev, generated by the caller */ + __le32 vdev_id; + /* peer mac address */ + struct wmi_mac_addr peer_macaddr; + /* Tid number */ + __le32 tid; + /* status code */ + __le32 statuscode; +} __packed; + +struct wmi_send_singleamsdu_cmd { + /* unique id identifying the vdev, generated by the caller */ + __le32 vdev_id; + /* peer mac address */ + struct wmi_mac_addr peer_macaddr; + /* Tid number */ + __le32 tid; +} __packed; + +enum wmi_peer_smps_state { + WMI_PEER_SMPS_PS_NONE = 0x0, + WMI_PEER_SMPS_STATIC = 0x1, + WMI_PEER_SMPS_DYNAMIC = 0x2 +}; + +enum wmi_peer_param { + WMI_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */ + WMI_PEER_AMPDU = 0x2, + WMI_PEER_AUTHORIZE = 0x3, + WMI_PEER_CHAN_WIDTH = 0x4, + WMI_PEER_NSS = 0x5, + WMI_PEER_USE_4ADDR = 0x6 +}; + +struct wmi_peer_set_param_cmd { + __le32 vdev_id; + struct wmi_mac_addr peer_macaddr; + __le32 param_id; + __le32 param_value; +} __packed; + +#define MAX_SUPPORTED_RATES 128 + +struct wmi_rate_set { + /* total number of rates */ + __le32 num_rates; + /* + * rates (each 8bit value) packed into a 32 bit word. + * the rates are filled from least significant byte to most + * significant byte. + */ + __le32 rates[(MAX_SUPPORTED_RATES/4)+1]; +} __packed; + +struct wmi_rate_set_arg { + unsigned int num_rates; + u8 rates[MAX_SUPPORTED_RATES]; +}; + +/* + * NOTE: It would bea good idea to represent the Tx MCS + * info in one word and Rx in another word. This is split + * into multiple words for convenience + */ +struct wmi_vht_rate_set { + __le32 rx_max_rate; /* Max Rx data rate */ + __le32 rx_mcs_set; /* Negotiated RX VHT rates */ + __le32 tx_max_rate; /* Max Tx data rate */ + __le32 tx_mcs_set; /* Negotiated TX VHT rates */ +} __packed; + +struct wmi_vht_rate_set_arg { + u32 rx_max_rate; + u32 rx_mcs_set; + u32 tx_max_rate; + u32 tx_mcs_set; +}; + +struct wmi_peer_set_rates_cmd { + /* peer MAC address */ + struct wmi_mac_addr peer_macaddr; + /* legacy rate set */ + struct wmi_rate_set peer_legacy_rates; + /* ht rate set */ + struct wmi_rate_set peer_ht_rates; +} __packed; + +struct wmi_peer_set_q_empty_callback_cmd { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; + /* peer MAC address */ + struct wmi_mac_addr peer_macaddr; + __le32 callback_enable; +} __packed; + +#define WMI_PEER_AUTH 0x00000001 +#define WMI_PEER_QOS 0x00000002 +#define WMI_PEER_NEED_PTK_4_WAY 0x00000004 +#define WMI_PEER_NEED_GTK_2_WAY 0x00000010 +#define WMI_PEER_APSD 0x00000800 +#define WMI_PEER_HT 0x00001000 +#define WMI_PEER_40MHZ 0x00002000 +#define WMI_PEER_STBC 0x00008000 +#define WMI_PEER_LDPC 0x00010000 +#define WMI_PEER_DYN_MIMOPS 0x00020000 +#define WMI_PEER_STATIC_MIMOPS 0x00040000 +#define WMI_PEER_SPATIAL_MUX 0x00200000 +#define WMI_PEER_VHT 0x02000000 +#define WMI_PEER_80MHZ 0x04000000 +#define WMI_PEER_PMF 0x08000000 + +/* + * Peer rate capabilities. + * + * This is of interest to the ratecontrol + * module which resides in the firmware. The bit definitions are + * consistent with that defined in if_athrate.c. + */ +#define WMI_RC_DS_FLAG 0x01 +#define WMI_RC_CW40_FLAG 0x02 +#define WMI_RC_SGI_FLAG 0x04 +#define WMI_RC_HT_FLAG 0x08 +#define WMI_RC_RTSCTS_FLAG 0x10 +#define WMI_RC_TX_STBC_FLAG 0x20 +#define WMI_RC_RX_STBC_FLAG 0xC0 +#define WMI_RC_RX_STBC_FLAG_S 6 +#define WMI_RC_WEP_TKIP_FLAG 0x100 +#define WMI_RC_TS_FLAG 0x200 +#define WMI_RC_UAPSD_FLAG 0x400 + +/* Maximum listen interval supported by hw in units of beacon interval */ +#define ATH10K_MAX_HW_LISTEN_INTERVAL 5 + +struct wmi_peer_assoc_complete_cmd { + struct wmi_mac_addr peer_macaddr; + __le32 vdev_id; + __le32 peer_new_assoc; /* 1=assoc, 0=reassoc */ + __le32 peer_associd; /* 16 LSBs */ + __le32 peer_flags; + __le32 peer_caps; /* 16 LSBs */ + __le32 peer_listen_intval; + __le32 peer_ht_caps; + __le32 peer_max_mpdu; + __le32 peer_mpdu_density; /* 0..16 */ + __le32 peer_rate_caps; + struct wmi_rate_set peer_legacy_rates; + struct wmi_rate_set peer_ht_rates; + __le32 peer_nss; /* num of spatial streams */ + __le32 peer_vht_caps; + __le32 peer_phymode; + struct wmi_vht_rate_set peer_vht_rates; + /* HT Operation Element of the peer. Five bytes packed in 2 + * INT32 array and filled from lsb to msb. */ + __le32 peer_ht_info[2]; +} __packed; + +struct wmi_peer_assoc_complete_arg { + u8 addr[ETH_ALEN]; + u32 vdev_id; + bool peer_reassoc; + u16 peer_aid; + u32 peer_flags; /* see %WMI_PEER_ */ + u16 peer_caps; + u32 peer_listen_intval; + u32 peer_ht_caps; + u32 peer_max_mpdu; + u32 peer_mpdu_density; /* 0..16 */ + u32 peer_rate_caps; /* see %WMI_RC_ */ + struct wmi_rate_set_arg peer_legacy_rates; + struct wmi_rate_set_arg peer_ht_rates; + u32 peer_num_spatial_streams; + u32 peer_vht_caps; + enum wmi_phy_mode peer_phymode; + struct wmi_vht_rate_set_arg peer_vht_rates; +}; + +struct wmi_peer_add_wds_entry_cmd { + /* peer MAC address */ + struct wmi_mac_addr peer_macaddr; + /* wds MAC addr */ + struct wmi_mac_addr wds_macaddr; +} __packed; + +struct wmi_peer_remove_wds_entry_cmd { + /* wds MAC addr */ + struct wmi_mac_addr wds_macaddr; +} __packed; + +struct wmi_peer_q_empty_callback_event { + /* peer MAC address */ + struct wmi_mac_addr peer_macaddr; +} __packed; + +/* + * Channel info WMI event + */ +struct wmi_chan_info_event { + __le32 err_code; + __le32 freq; + __le32 cmd_flags; + __le32 noise_floor; + __le32 rx_clear_count; + __le32 cycle_count; +} __packed; + +/* Beacon filter wmi command info */ +#define BCN_FLT_MAX_SUPPORTED_IES 256 +#define BCN_FLT_MAX_ELEMS_IE_LIST (BCN_FLT_MAX_SUPPORTED_IES / 32) + +struct bss_bcn_stats { + __le32 vdev_id; + __le32 bss_bcnsdropped; + __le32 bss_bcnsdelivered; +} __packed; + +struct bcn_filter_stats { + __le32 bcns_dropped; + __le32 bcns_delivered; + __le32 activefilters; + struct bss_bcn_stats bss_stats; +} __packed; + +struct wmi_add_bcn_filter_cmd { + u32 vdev_id; + u32 ie_map[BCN_FLT_MAX_ELEMS_IE_LIST]; +} __packed; + +enum wmi_sta_keepalive_method { + WMI_STA_KEEPALIVE_METHOD_NULL_FRAME = 1, + WMI_STA_KEEPALIVE_METHOD_UNSOLICITATED_ARP_RESPONSE = 2, +}; + +/* note: ip4 addresses are in network byte order, i.e. big endian */ +struct wmi_sta_keepalive_arp_resp { + __be32 src_ip4_addr; + __be32 dest_ip4_addr; + struct wmi_mac_addr dest_mac_addr; +} __packed; + +struct wmi_sta_keepalive_cmd { + __le32 vdev_id; + __le32 enabled; + __le32 method; /* WMI_STA_KEEPALIVE_METHOD_ */ + __le32 interval; /* in seconds */ + struct wmi_sta_keepalive_arp_resp arp_resp; +} __packed; + +#define ATH10K_RTS_MAX 2347 +#define ATH10K_FRAGMT_THRESHOLD_MIN 540 +#define ATH10K_FRAGMT_THRESHOLD_MAX 2346 + +#define WMI_MAX_EVENT 0x1000 +/* Maximum number of pending TXed WMI packets */ +#define WMI_MAX_PENDING_TX_COUNT 128 +#define WMI_SKB_HEADROOM sizeof(struct wmi_cmd_hdr) + +/* By default disable power save for IBSS */ +#define ATH10K_DEFAULT_ATIM 0 + +struct ath10k; +struct ath10k_vif; + +int ath10k_wmi_attach(struct ath10k *ar); +void ath10k_wmi_detach(struct ath10k *ar); +int ath10k_wmi_wait_for_service_ready(struct ath10k *ar); +int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar); +void ath10k_wmi_flush_tx(struct ath10k *ar); + +int ath10k_wmi_connect_htc_service(struct ath10k *ar); +int ath10k_wmi_pdev_set_channel(struct ath10k *ar, + const struct wmi_channel_arg *); +int ath10k_wmi_pdev_suspend_target(struct ath10k *ar); +int ath10k_wmi_pdev_resume_target(struct ath10k *ar); +int ath10k_wmi_pdev_set_regdomain(struct ath10k *ar, u16 rd, u16 rd2g, + u16 rd5g, u16 ctl2g, u16 ctl5g); +int ath10k_wmi_pdev_set_param(struct ath10k *ar, enum wmi_pdev_param id, + u32 value); +int ath10k_wmi_cmd_init(struct ath10k *ar); +int ath10k_wmi_start_scan(struct ath10k *ar, const struct wmi_start_scan_arg *); +void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *); +int ath10k_wmi_stop_scan(struct ath10k *ar, + const struct wmi_stop_scan_arg *arg); +int ath10k_wmi_vdev_create(struct ath10k *ar, u32 vdev_id, + enum wmi_vdev_type type, + enum wmi_vdev_subtype subtype, + const u8 macaddr[ETH_ALEN]); +int ath10k_wmi_vdev_delete(struct ath10k *ar, u32 vdev_id); +int ath10k_wmi_vdev_start(struct ath10k *ar, + const struct wmi_vdev_start_request_arg *); +int ath10k_wmi_vdev_restart(struct ath10k *ar, + const struct wmi_vdev_start_request_arg *); +int ath10k_wmi_vdev_stop(struct ath10k *ar, u32 vdev_id); +int ath10k_wmi_vdev_up(struct ath10k *ar, u32 vdev_id, u32 aid, + const u8 *bssid); +int ath10k_wmi_vdev_down(struct ath10k *ar, u32 vdev_id); +int ath10k_wmi_vdev_set_param(struct ath10k *ar, u32 vdev_id, + enum wmi_vdev_param param_id, u32 param_value); +int ath10k_wmi_vdev_install_key(struct ath10k *ar, + const struct wmi_vdev_install_key_arg *arg); +int ath10k_wmi_peer_create(struct ath10k *ar, u32 vdev_id, + const u8 peer_addr[ETH_ALEN]); +int ath10k_wmi_peer_delete(struct ath10k *ar, u32 vdev_id, + const u8 peer_addr[ETH_ALEN]); +int ath10k_wmi_peer_flush(struct ath10k *ar, u32 vdev_id, + const u8 peer_addr[ETH_ALEN], u32 tid_bitmap); +int ath10k_wmi_peer_set_param(struct ath10k *ar, u32 vdev_id, + const u8 *peer_addr, + enum wmi_peer_param param_id, u32 param_value); +int ath10k_wmi_peer_assoc(struct ath10k *ar, + const struct wmi_peer_assoc_complete_arg *arg); +int ath10k_wmi_set_psmode(struct ath10k *ar, u32 vdev_id, + enum wmi_sta_ps_mode psmode); +int ath10k_wmi_set_sta_ps_param(struct ath10k *ar, u32 vdev_id, + enum wmi_sta_powersave_param param_id, + u32 value); +int ath10k_wmi_set_ap_ps_param(struct ath10k *ar, u32 vdev_id, const u8 *mac, + enum wmi_ap_ps_peer_param param_id, u32 value); +int ath10k_wmi_scan_chan_list(struct ath10k *ar, + const struct wmi_scan_chan_list_arg *arg); +int ath10k_wmi_beacon_send(struct ath10k *ar, const struct wmi_bcn_tx_arg *arg); +int ath10k_wmi_pdev_set_wmm_params(struct ath10k *ar, + const struct wmi_pdev_set_wmm_params_arg *arg); +int ath10k_wmi_request_stats(struct ath10k *ar, enum wmi_stats_id stats_id); + +#endif /* _WMI_H_ */ |