diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath5k/pcu.c')
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/pcu.c | 1175 |
1 files changed, 1175 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c new file mode 100644 index 00000000000..2942f13c9c4 --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/pcu.c @@ -0,0 +1,1175 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2007-2008 Matthew W. S. Bell <mentor@madwifi.org> + * Copyright (c) 2007-2008 Luis Rodriguez <mcgrof@winlab.rutgers.edu> + * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org> + * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/*********************************\ +* Protocol Control Unit Functions * +\*********************************/ + +#include "ath5k.h" +#include "reg.h" +#include "debug.h" +#include "base.h" + +/*******************\ +* Generic functions * +\*******************/ + +/** + * ath5k_hw_set_opmode - Set PCU operating mode + * + * @ah: The &struct ath5k_hw + * + * Initialize PCU for the various operating modes (AP/STA etc) + * + * NOTE: ah->ah_op_mode must be set before calling this. + */ +int ath5k_hw_set_opmode(struct ath5k_hw *ah) +{ + u32 pcu_reg, beacon_reg, low_id, high_id; + + + /* Preserve rest settings */ + pcu_reg = ath5k_hw_reg_read(ah, AR5K_STA_ID1) & 0xffff0000; + pcu_reg &= ~(AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_AP + | AR5K_STA_ID1_KEYSRCH_MODE + | (ah->ah_version == AR5K_AR5210 ? + (AR5K_STA_ID1_PWR_SV | AR5K_STA_ID1_NO_PSPOLL) : 0)); + + beacon_reg = 0; + + ATH5K_TRACE(ah->ah_sc); + + switch (ah->ah_op_mode) { + case NL80211_IFTYPE_ADHOC: + pcu_reg |= AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_KEYSRCH_MODE; + beacon_reg |= AR5K_BCR_ADHOC; + if (ah->ah_version == AR5K_AR5210) + pcu_reg |= AR5K_STA_ID1_NO_PSPOLL; + else + AR5K_REG_ENABLE_BITS(ah, AR5K_CFG, AR5K_CFG_IBSS); + break; + + case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_MESH_POINT: + pcu_reg |= AR5K_STA_ID1_AP | AR5K_STA_ID1_KEYSRCH_MODE; + beacon_reg |= AR5K_BCR_AP; + if (ah->ah_version == AR5K_AR5210) + pcu_reg |= AR5K_STA_ID1_NO_PSPOLL; + else + AR5K_REG_DISABLE_BITS(ah, AR5K_CFG, AR5K_CFG_IBSS); + break; + + case NL80211_IFTYPE_STATION: + pcu_reg |= AR5K_STA_ID1_KEYSRCH_MODE + | (ah->ah_version == AR5K_AR5210 ? + AR5K_STA_ID1_PWR_SV : 0); + case NL80211_IFTYPE_MONITOR: + pcu_reg |= AR5K_STA_ID1_KEYSRCH_MODE + | (ah->ah_version == AR5K_AR5210 ? + AR5K_STA_ID1_NO_PSPOLL : 0); + break; + + default: + return -EINVAL; + } + + /* + * Set PCU registers + */ + low_id = AR5K_LOW_ID(ah->ah_sta_id); + high_id = AR5K_HIGH_ID(ah->ah_sta_id); + ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0); + ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1); + + /* + * Set Beacon Control Register on 5210 + */ + if (ah->ah_version == AR5K_AR5210) + ath5k_hw_reg_write(ah, beacon_reg, AR5K_BCR); + + return 0; +} + +/** + * ath5k_hw_update - Update mib counters (mac layer statistics) + * + * @ah: The &struct ath5k_hw + * @stats: The &struct ieee80211_low_level_stats we use to track + * statistics on the driver + * + * Reads MIB counters from PCU and updates sw statistics. Must be + * called after a MIB interrupt. + */ +void ath5k_hw_update_mib_counters(struct ath5k_hw *ah, + struct ieee80211_low_level_stats *stats) +{ + ATH5K_TRACE(ah->ah_sc); + + /* Read-And-Clear */ + stats->dot11ACKFailureCount += ath5k_hw_reg_read(ah, AR5K_ACK_FAIL); + stats->dot11RTSFailureCount += ath5k_hw_reg_read(ah, AR5K_RTS_FAIL); + stats->dot11RTSSuccessCount += ath5k_hw_reg_read(ah, AR5K_RTS_OK); + stats->dot11FCSErrorCount += ath5k_hw_reg_read(ah, AR5K_FCS_FAIL); + + /* XXX: Should we use this to track beacon count ? + * -we read it anyway to clear the register */ + ath5k_hw_reg_read(ah, AR5K_BEACON_CNT); + + /* Reset profile count registers on 5212*/ + if (ah->ah_version == AR5K_AR5212) { + ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_TX); + ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RX); + ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RXCLR); + ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_CYCLE); + } + + /* TODO: Handle ANI stats */ +} + +/** + * ath5k_hw_set_ack_bitrate - set bitrate for ACKs + * + * @ah: The &struct ath5k_hw + * @high: Flag to determine if we want to use high transmition rate + * for ACKs or not + * + * If high flag is set, we tell hw to use a set of control rates based on + * the current transmition rate (check out control_rates array inside reset.c). + * If not hw just uses the lowest rate available for the current modulation + * scheme being used (1Mbit for CCK and 6Mbits for OFDM). + */ +void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high) +{ + if (ah->ah_version != AR5K_AR5212) + return; + else { + u32 val = AR5K_STA_ID1_BASE_RATE_11B | AR5K_STA_ID1_ACKCTS_6MB; + if (high) + AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, val); + else + AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, val); + } +} + + +/******************\ +* ACK/CTS Timeouts * +\******************/ + +/** + * ath5k_hw_het_ack_timeout - Get ACK timeout from PCU in usec + * + * @ah: The &struct ath5k_hw + */ +unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + + return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah, + AR5K_TIME_OUT), AR5K_TIME_OUT_ACK), ah->ah_turbo); +} + +/** + * ath5k_hw_set_ack_timeout - Set ACK timeout on PCU + * + * @ah: The &struct ath5k_hw + * @timeout: Timeout in usec + */ +int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout) +{ + ATH5K_TRACE(ah->ah_sc); + if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_ACK), + ah->ah_turbo) <= timeout) + return -EINVAL; + + AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_ACK, + ath5k_hw_htoclock(timeout, ah->ah_turbo)); + + return 0; +} + +/** + * ath5k_hw_get_cts_timeout - Get CTS timeout from PCU in usec + * + * @ah: The &struct ath5k_hw + */ +unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah, + AR5K_TIME_OUT), AR5K_TIME_OUT_CTS), ah->ah_turbo); +} + +/** + * ath5k_hw_set_cts_timeout - Set CTS timeout on PCU + * + * @ah: The &struct ath5k_hw + * @timeout: Timeout in usec + */ +int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout) +{ + ATH5K_TRACE(ah->ah_sc); + if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_CTS), + ah->ah_turbo) <= timeout) + return -EINVAL; + + AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_CTS, + ath5k_hw_htoclock(timeout, ah->ah_turbo)); + + return 0; +} + + +/****************\ +* BSSID handling * +\****************/ + +/** + * ath5k_hw_get_lladdr - Get station id + * + * @ah: The &struct ath5k_hw + * @mac: The card's mac address + * + * Initialize ah->ah_sta_id using the mac address provided + * (just a memcpy). + * + * TODO: Remove it once we merge ath5k_softc and ath5k_hw + */ +void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac) +{ + ATH5K_TRACE(ah->ah_sc); + memcpy(mac, ah->ah_sta_id, ETH_ALEN); +} + +/** + * ath5k_hw_set_lladdr - Set station id + * + * @ah: The &struct ath5k_hw + * @mac: The card's mac address + * + * Set station id on hw using the provided mac address + */ +int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac) +{ + u32 low_id, high_id; + u32 pcu_reg; + + ATH5K_TRACE(ah->ah_sc); + /* Set new station ID */ + memcpy(ah->ah_sta_id, mac, ETH_ALEN); + + pcu_reg = ath5k_hw_reg_read(ah, AR5K_STA_ID1) & 0xffff0000; + + low_id = AR5K_LOW_ID(mac); + high_id = AR5K_HIGH_ID(mac); + + ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0); + ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1); + + return 0; +} + +/** + * ath5k_hw_set_associd - Set BSSID for association + * + * @ah: The &struct ath5k_hw + * @bssid: BSSID + * @assoc_id: Assoc id + * + * Sets the BSSID which trigers the "SME Join" operation + */ +void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id) +{ + u32 low_id, high_id; + u16 tim_offset = 0; + + /* + * Set simple BSSID mask on 5212 + */ + if (ah->ah_version == AR5K_AR5212) { + ath5k_hw_reg_write(ah, AR5K_LOW_ID(ah->ah_bssid_mask), + AR5K_BSS_IDM0); + ath5k_hw_reg_write(ah, AR5K_HIGH_ID(ah->ah_bssid_mask), + AR5K_BSS_IDM1); + } + + /* + * Set BSSID which triggers the "SME Join" operation + */ + low_id = AR5K_LOW_ID(bssid); + high_id = AR5K_HIGH_ID(bssid); + ath5k_hw_reg_write(ah, low_id, AR5K_BSS_ID0); + ath5k_hw_reg_write(ah, high_id | ((assoc_id & 0x3fff) << + AR5K_BSS_ID1_AID_S), AR5K_BSS_ID1); + + if (assoc_id == 0) { + ath5k_hw_disable_pspoll(ah); + return; + } + + AR5K_REG_WRITE_BITS(ah, AR5K_BEACON, AR5K_BEACON_TIM, + tim_offset ? tim_offset + 4 : 0); + + ath5k_hw_enable_pspoll(ah, NULL, 0); +} + +/** + * ath5k_hw_set_bssid_mask - filter out bssids we listen + * + * @ah: the &struct ath5k_hw + * @mask: the bssid_mask, a u8 array of size ETH_ALEN + * + * BSSID masking is a method used by AR5212 and newer hardware to inform PCU + * which bits of the interface's MAC address should be looked at when trying + * to decide which packets to ACK. In station mode and AP mode with a single + * BSS every bit matters since we lock to only one BSS. In AP mode with + * multiple BSSes (virtual interfaces) not every bit matters because hw must + * accept frames for all BSSes and so we tweak some bits of our mac address + * in order to have multiple BSSes. + * + * NOTE: This is a simple filter and does *not* filter out all + * relevant frames. Some frames that are not for us might get ACKed from us + * by PCU because they just match the mask. + * + * When handling multiple BSSes you can get the BSSID mask by computing the + * set of ~ ( MAC XOR BSSID ) for all bssids we handle. + * + * When you do this you are essentially computing the common bits of all your + * BSSes. Later it is assumed the harware will "and" (&) the BSSID mask with + * the MAC address to obtain the relevant bits and compare the result with + * (frame's BSSID & mask) to see if they match. + */ +/* + * Simple example: on your card you have have two BSSes you have created with + * BSSID-01 and BSSID-02. Lets assume BSSID-01 will not use the MAC address. + * There is another BSSID-03 but you are not part of it. For simplicity's sake, + * assuming only 4 bits for a mac address and for BSSIDs you can then have: + * + * \ + * MAC: 0001 | + * BSSID-01: 0100 | --> Belongs to us + * BSSID-02: 1001 | + * / + * ------------------- + * BSSID-03: 0110 | --> External + * ------------------- + * + * Our bssid_mask would then be: + * + * On loop iteration for BSSID-01: + * ~(0001 ^ 0100) -> ~(0101) + * -> 1010 + * bssid_mask = 1010 + * + * On loop iteration for BSSID-02: + * bssid_mask &= ~(0001 ^ 1001) + * bssid_mask = (1010) & ~(0001 ^ 1001) + * bssid_mask = (1010) & ~(1001) + * bssid_mask = (1010) & (0110) + * bssid_mask = 0010 + * + * A bssid_mask of 0010 means "only pay attention to the second least + * significant bit". This is because its the only bit common + * amongst the MAC and all BSSIDs we support. To findout what the real + * common bit is we can simply "&" the bssid_mask now with any BSSID we have + * or our MAC address (we assume the hardware uses the MAC address). + * + * Now, suppose there's an incoming frame for BSSID-03: + * + * IFRAME-01: 0110 + * + * An easy eye-inspeciton of this already should tell you that this frame + * will not pass our check. This is beacuse the bssid_mask tells the + * hardware to only look at the second least significant bit and the + * common bit amongst the MAC and BSSIDs is 0, this frame has the 2nd LSB + * as 1, which does not match 0. + * + * So with IFRAME-01 we *assume* the hardware will do: + * + * allow = (IFRAME-01 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0; + * --> allow = (0110 & 0010) == (0010 & 0001) ? 1 : 0; + * --> allow = (0010) == 0000 ? 1 : 0; + * --> allow = 0 + * + * Lets now test a frame that should work: + * + * IFRAME-02: 0001 (we should allow) + * + * allow = (0001 & 1010) == 1010 + * + * allow = (IFRAME-02 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0; + * --> allow = (0001 & 0010) == (0010 & 0001) ? 1 :0; + * --> allow = (0010) == (0010) + * --> allow = 1 + * + * Other examples: + * + * IFRAME-03: 0100 --> allowed + * IFRAME-04: 1001 --> allowed + * IFRAME-05: 1101 --> allowed but its not for us!!! + * + */ +int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask) +{ + u32 low_id, high_id; + ATH5K_TRACE(ah->ah_sc); + + /* Cache bssid mask so that we can restore it + * on reset */ + memcpy(ah->ah_bssid_mask, mask, ETH_ALEN); + if (ah->ah_version == AR5K_AR5212) { + low_id = AR5K_LOW_ID(mask); + high_id = AR5K_HIGH_ID(mask); + + ath5k_hw_reg_write(ah, low_id, AR5K_BSS_IDM0); + ath5k_hw_reg_write(ah, high_id, AR5K_BSS_IDM1); + + return 0; + } + + return -EIO; +} + + +/************\ +* RX Control * +\************/ + +/** + * ath5k_hw_start_rx_pcu - Start RX engine + * + * @ah: The &struct ath5k_hw + * + * Starts RX engine on PCU so that hw can process RXed frames + * (ACK etc). + * + * NOTE: RX DMA should be already enabled using ath5k_hw_start_rx_dma + * TODO: Init ANI here + */ +void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX); +} + +/** + * at5k_hw_stop_rx_pcu - Stop RX engine + * + * @ah: The &struct ath5k_hw + * + * Stops RX engine on PCU + * + * TODO: Detach ANI here + */ +void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX); +} + +/* + * Set multicast filter + */ +void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1) +{ + ATH5K_TRACE(ah->ah_sc); + /* Set the multicat filter */ + ath5k_hw_reg_write(ah, filter0, AR5K_MCAST_FILTER0); + ath5k_hw_reg_write(ah, filter1, AR5K_MCAST_FILTER1); +} + +/* + * Set multicast filter by index + */ +int ath5k_hw_set_mcast_filter_idx(struct ath5k_hw *ah, u32 index) +{ + + ATH5K_TRACE(ah->ah_sc); + if (index >= 64) + return -EINVAL; + else if (index >= 32) + AR5K_REG_ENABLE_BITS(ah, AR5K_MCAST_FILTER1, + (1 << (index - 32))); + else + AR5K_REG_ENABLE_BITS(ah, AR5K_MCAST_FILTER0, (1 << index)); + + return 0; +} + +/* + * Clear Multicast filter by index + */ +int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index) +{ + + ATH5K_TRACE(ah->ah_sc); + if (index >= 64) + return -EINVAL; + else if (index >= 32) + AR5K_REG_DISABLE_BITS(ah, AR5K_MCAST_FILTER1, + (1 << (index - 32))); + else + AR5K_REG_DISABLE_BITS(ah, AR5K_MCAST_FILTER0, (1 << index)); + + return 0; +} + +/** + * ath5k_hw_get_rx_filter - Get current rx filter + * + * @ah: The &struct ath5k_hw + * + * Returns the RX filter by reading rx filter and + * phy error filter registers. RX filter is used + * to set the allowed frame types that PCU will accept + * and pass to the driver. For a list of frame types + * check out reg.h. + */ +u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah) +{ + u32 data, filter = 0; + + ATH5K_TRACE(ah->ah_sc); + filter = ath5k_hw_reg_read(ah, AR5K_RX_FILTER); + + /*Radar detection for 5212*/ + if (ah->ah_version == AR5K_AR5212) { + data = ath5k_hw_reg_read(ah, AR5K_PHY_ERR_FIL); + + if (data & AR5K_PHY_ERR_FIL_RADAR) + filter |= AR5K_RX_FILTER_RADARERR; + if (data & (AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK)) + filter |= AR5K_RX_FILTER_PHYERR; + } + + return filter; +} + +/** + * ath5k_hw_set_rx_filter - Set rx filter + * + * @ah: The &struct ath5k_hw + * @filter: RX filter mask (see reg.h) + * + * Sets RX filter register and also handles PHY error filter + * register on 5212 and newer chips so that we have proper PHY + * error reporting. + */ +void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter) +{ + u32 data = 0; + + ATH5K_TRACE(ah->ah_sc); + + /* Set PHY error filter register on 5212*/ + if (ah->ah_version == AR5K_AR5212) { + if (filter & AR5K_RX_FILTER_RADARERR) + data |= AR5K_PHY_ERR_FIL_RADAR; + if (filter & AR5K_RX_FILTER_PHYERR) + data |= AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK; + } + + /* + * The AR5210 uses promiscous mode to detect radar activity + */ + if (ah->ah_version == AR5K_AR5210 && + (filter & AR5K_RX_FILTER_RADARERR)) { + filter &= ~AR5K_RX_FILTER_RADARERR; + filter |= AR5K_RX_FILTER_PROM; + } + + /*Zero length DMA (phy error reporting) */ + if (data) + AR5K_REG_ENABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA); + else + AR5K_REG_DISABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA); + + /*Write RX Filter register*/ + ath5k_hw_reg_write(ah, filter & 0xff, AR5K_RX_FILTER); + + /*Write PHY error filter register on 5212*/ + if (ah->ah_version == AR5K_AR5212) + ath5k_hw_reg_write(ah, data, AR5K_PHY_ERR_FIL); + +} + + +/****************\ +* Beacon control * +\****************/ + +/** + * ath5k_hw_get_tsf32 - Get a 32bit TSF + * + * @ah: The &struct ath5k_hw + * + * Returns lower 32 bits of current TSF + */ +u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + return ath5k_hw_reg_read(ah, AR5K_TSF_L32); +} + +/** + * ath5k_hw_get_tsf64 - Get the full 64bit TSF + * + * @ah: The &struct ath5k_hw + * + * Returns the current TSF + */ +u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah) +{ + u64 tsf = ath5k_hw_reg_read(ah, AR5K_TSF_U32); + ATH5K_TRACE(ah->ah_sc); + + return ath5k_hw_reg_read(ah, AR5K_TSF_L32) | (tsf << 32); +} + +/** + * ath5k_hw_set_tsf64 - Set a new 64bit TSF + * + * @ah: The &struct ath5k_hw + * @tsf64: The new 64bit TSF + * + * Sets the new TSF + */ +void ath5k_hw_set_tsf64(struct ath5k_hw *ah, u64 tsf64) +{ + ATH5K_TRACE(ah->ah_sc); + + ath5k_hw_reg_write(ah, tsf64 & 0xffffffff, AR5K_TSF_L32); + ath5k_hw_reg_write(ah, (tsf64 >> 32) & 0xffffffff, AR5K_TSF_U32); +} + +/** + * ath5k_hw_reset_tsf - Force a TSF reset + * + * @ah: The &struct ath5k_hw + * + * Forces a TSF reset on PCU + */ +void ath5k_hw_reset_tsf(struct ath5k_hw *ah) +{ + u32 val; + + ATH5K_TRACE(ah->ah_sc); + + val = ath5k_hw_reg_read(ah, AR5K_BEACON) | AR5K_BEACON_RESET_TSF; + + /* + * Each write to the RESET_TSF bit toggles a hardware internal + * signal to reset TSF, but if left high it will cause a TSF reset + * on the next chip reset as well. Thus we always write the value + * twice to clear the signal. + */ + ath5k_hw_reg_write(ah, val, AR5K_BEACON); + ath5k_hw_reg_write(ah, val, AR5K_BEACON); +} + +/* + * Initialize beacon timers + */ +void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval) +{ + u32 timer1, timer2, timer3; + + ATH5K_TRACE(ah->ah_sc); + /* + * Set the additional timers by mode + */ + switch (ah->ah_op_mode) { + case NL80211_IFTYPE_MONITOR: + case NL80211_IFTYPE_STATION: + /* In STA mode timer1 is used as next wakeup + * timer and timer2 as next CFP duration start + * timer. Both in 1/8TUs. */ + /* TODO: PCF handling */ + if (ah->ah_version == AR5K_AR5210) { + timer1 = 0xffffffff; + timer2 = 0xffffffff; + } else { + timer1 = 0x0000ffff; + timer2 = 0x0007ffff; + } + /* Mark associated AP as PCF incapable for now */ + AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, AR5K_STA_ID1_PCF); + break; + case NL80211_IFTYPE_ADHOC: + AR5K_REG_ENABLE_BITS(ah, AR5K_TXCFG, AR5K_TXCFG_ADHOC_BCN_ATIM); + default: + /* On non-STA modes timer1 is used as next DMA + * beacon alert (DBA) timer and timer2 as next + * software beacon alert. Both in 1/8TUs. */ + timer1 = (next_beacon - AR5K_TUNE_DMA_BEACON_RESP) << 3; + timer2 = (next_beacon - AR5K_TUNE_SW_BEACON_RESP) << 3; + break; + } + + /* Timer3 marks the end of our ATIM window + * a zero length window is not allowed because + * we 'll get no beacons */ + timer3 = next_beacon + (ah->ah_atim_window ? ah->ah_atim_window : 1); + + /* + * Set the beacon register and enable all timers. + */ + /* When in AP or Mesh Point mode zero timer0 to start TSF */ + if (ah->ah_op_mode == NL80211_IFTYPE_AP || + ah->ah_op_mode == NL80211_IFTYPE_MESH_POINT) + ath5k_hw_reg_write(ah, 0, AR5K_TIMER0); + + ath5k_hw_reg_write(ah, next_beacon, AR5K_TIMER0); + ath5k_hw_reg_write(ah, timer1, AR5K_TIMER1); + ath5k_hw_reg_write(ah, timer2, AR5K_TIMER2); + ath5k_hw_reg_write(ah, timer3, AR5K_TIMER3); + + /* Force a TSF reset if requested and enable beacons */ + if (interval & AR5K_BEACON_RESET_TSF) + ath5k_hw_reset_tsf(ah); + + ath5k_hw_reg_write(ah, interval & (AR5K_BEACON_PERIOD | + AR5K_BEACON_ENABLE), + AR5K_BEACON); + + /* Flush any pending BMISS interrupts on ISR by + * performing a clear-on-write operation on PISR + * register for the BMISS bit (writing a bit on + * ISR togles a reset for that bit and leaves + * the rest bits intact) */ + if (ah->ah_version == AR5K_AR5210) + ath5k_hw_reg_write(ah, AR5K_ISR_BMISS, AR5K_ISR); + else + ath5k_hw_reg_write(ah, AR5K_ISR_BMISS, AR5K_PISR); + + /* TODO: Set enchanced sleep registers on AR5212 + * based on vif->bss_conf params, until then + * disable power save reporting.*/ + AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, AR5K_STA_ID1_PWR_SV); + +} + +#if 0 +/* + * Set beacon timers + */ +int ath5k_hw_set_beacon_timers(struct ath5k_hw *ah, + const struct ath5k_beacon_state *state) +{ + u32 cfp_period, next_cfp, dtim, interval, next_beacon; + + /* + * TODO: should be changed through *state + * review struct ath5k_beacon_state struct + * + * XXX: These are used for cfp period bellow, are they + * ok ? Is it O.K. for tsf here to be 0 or should we use + * get_tsf ? + */ + u32 dtim_count = 0; /* XXX */ + u32 cfp_count = 0; /* XXX */ + u32 tsf = 0; /* XXX */ + + ATH5K_TRACE(ah->ah_sc); + /* Return on an invalid beacon state */ + if (state->bs_interval < 1) + return -EINVAL; + + interval = state->bs_interval; + dtim = state->bs_dtim_period; + + /* + * PCF support? + */ + if (state->bs_cfp_period > 0) { + /* + * Enable PCF mode and set the CFP + * (Contention Free Period) and timer registers + */ + cfp_period = state->bs_cfp_period * state->bs_dtim_period * + state->bs_interval; + next_cfp = (cfp_count * state->bs_dtim_period + dtim_count) * + state->bs_interval; + + AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, + AR5K_STA_ID1_DEFAULT_ANTENNA | + AR5K_STA_ID1_PCF); + ath5k_hw_reg_write(ah, cfp_period, AR5K_CFP_PERIOD); + ath5k_hw_reg_write(ah, state->bs_cfp_max_duration, + AR5K_CFP_DUR); + ath5k_hw_reg_write(ah, (tsf + (next_cfp == 0 ? cfp_period : + next_cfp)) << 3, AR5K_TIMER2); + } else { + /* Disable PCF mode */ + AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, + AR5K_STA_ID1_DEFAULT_ANTENNA | + AR5K_STA_ID1_PCF); + } + + /* + * Enable the beacon timer register + */ + ath5k_hw_reg_write(ah, state->bs_next_beacon, AR5K_TIMER0); + + /* + * Start the beacon timers + */ + ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, AR5K_BEACON) & + ~(AR5K_BEACON_PERIOD | AR5K_BEACON_TIM)) | + AR5K_REG_SM(state->bs_tim_offset ? state->bs_tim_offset + 4 : 0, + AR5K_BEACON_TIM) | AR5K_REG_SM(state->bs_interval, + AR5K_BEACON_PERIOD), AR5K_BEACON); + + /* + * Write new beacon miss threshold, if it appears to be valid + * XXX: Figure out right values for min <= bs_bmiss_threshold <= max + * and return if its not in range. We can test this by reading value and + * setting value to a largest value and seeing which values register. + */ + + AR5K_REG_WRITE_BITS(ah, AR5K_RSSI_THR, AR5K_RSSI_THR_BMISS, + state->bs_bmiss_threshold); + + /* + * Set sleep control register + * XXX: Didn't find this in 5210 code but since this register + * exists also in ar5k's 5210 headers i leave it as common code. + */ + AR5K_REG_WRITE_BITS(ah, AR5K_SLEEP_CTL, AR5K_SLEEP_CTL_SLDUR, + (state->bs_sleep_duration - 3) << 3); + + /* + * Set enhanced sleep registers on 5212 + */ + if (ah->ah_version == AR5K_AR5212) { + if (state->bs_sleep_duration > state->bs_interval && + roundup(state->bs_sleep_duration, interval) == + state->bs_sleep_duration) + interval = state->bs_sleep_duration; + + if (state->bs_sleep_duration > dtim && (dtim == 0 || + roundup(state->bs_sleep_duration, dtim) == + state->bs_sleep_duration)) + dtim = state->bs_sleep_duration; + + if (interval > dtim) + return -EINVAL; + + next_beacon = interval == dtim ? state->bs_next_dtim : + state->bs_next_beacon; + + ath5k_hw_reg_write(ah, + AR5K_REG_SM((state->bs_next_dtim - 3) << 3, + AR5K_SLEEP0_NEXT_DTIM) | + AR5K_REG_SM(10, AR5K_SLEEP0_CABTO) | + AR5K_SLEEP0_ENH_SLEEP_EN | + AR5K_SLEEP0_ASSUME_DTIM, AR5K_SLEEP0); + + ath5k_hw_reg_write(ah, AR5K_REG_SM((next_beacon - 3) << 3, + AR5K_SLEEP1_NEXT_TIM) | + AR5K_REG_SM(10, AR5K_SLEEP1_BEACON_TO), AR5K_SLEEP1); + + ath5k_hw_reg_write(ah, + AR5K_REG_SM(interval, AR5K_SLEEP2_TIM_PER) | + AR5K_REG_SM(dtim, AR5K_SLEEP2_DTIM_PER), AR5K_SLEEP2); + } + + return 0; +} + +/* + * Reset beacon timers + */ +void ath5k_hw_reset_beacon(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + /* + * Disable beacon timer + */ + ath5k_hw_reg_write(ah, 0, AR5K_TIMER0); + + /* + * Disable some beacon register values + */ + AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, + AR5K_STA_ID1_DEFAULT_ANTENNA | AR5K_STA_ID1_PCF); + ath5k_hw_reg_write(ah, AR5K_BEACON_PERIOD, AR5K_BEACON); +} + +/* + * Wait for beacon queue to finish + */ +int ath5k_hw_beaconq_finish(struct ath5k_hw *ah, unsigned long phys_addr) +{ + unsigned int i; + int ret; + + ATH5K_TRACE(ah->ah_sc); + + /* 5210 doesn't have QCU*/ + if (ah->ah_version == AR5K_AR5210) { + /* + * Wait for beaconn queue to finish by checking + * Control Register and Beacon Status Register. + */ + for (i = AR5K_TUNE_BEACON_INTERVAL / 2; i > 0; i--) { + if (!(ath5k_hw_reg_read(ah, AR5K_BSR) & AR5K_BSR_TXQ1F) + || + !(ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_BSR_TXQ1F)) + break; + udelay(10); + } + + /* Timeout... */ + if (i <= 0) { + /* + * Re-schedule the beacon queue + */ + ath5k_hw_reg_write(ah, phys_addr, AR5K_NOQCU_TXDP1); + ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE, + AR5K_BCR); + + return -EIO; + } + ret = 0; + } else { + /*5211/5212*/ + ret = ath5k_hw_register_timeout(ah, + AR5K_QUEUE_STATUS(AR5K_TX_QUEUE_ID_BEACON), + AR5K_QCU_STS_FRMPENDCNT, 0, false); + + if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, AR5K_TX_QUEUE_ID_BEACON)) + return -EIO; + } + + return ret; +} +#endif + + +/*********************\ +* Key table functions * +\*********************/ + +/* + * Reset a key entry on the table + */ +int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry) +{ + unsigned int i, type; + u16 micentry = entry + AR5K_KEYTABLE_MIC_OFFSET; + + ATH5K_TRACE(ah->ah_sc); + AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE); + + type = ath5k_hw_reg_read(ah, AR5K_KEYTABLE_TYPE(entry)); + + for (i = 0; i < AR5K_KEYCACHE_SIZE; i++) + ath5k_hw_reg_write(ah, 0, AR5K_KEYTABLE_OFF(entry, i)); + + /* Reset associated MIC entry if TKIP + * is enabled located at offset (entry + 64) */ + if (type == AR5K_KEYTABLE_TYPE_TKIP) { + AR5K_ASSERT_ENTRY(micentry, AR5K_KEYTABLE_SIZE); + for (i = 0; i < AR5K_KEYCACHE_SIZE / 2 ; i++) + ath5k_hw_reg_write(ah, 0, + AR5K_KEYTABLE_OFF(micentry, i)); + } + + /* + * Set NULL encryption on AR5212+ + * + * Note: AR5K_KEYTABLE_TYPE -> AR5K_KEYTABLE_OFF(entry, 5) + * AR5K_KEYTABLE_TYPE_NULL -> 0x00000007 + * + * Note2: Windows driver (ndiswrapper) sets this to + * 0x00000714 instead of 0x00000007 + */ + if (ah->ah_version >= AR5K_AR5211) { + ath5k_hw_reg_write(ah, AR5K_KEYTABLE_TYPE_NULL, + AR5K_KEYTABLE_TYPE(entry)); + + if (type == AR5K_KEYTABLE_TYPE_TKIP) { + ath5k_hw_reg_write(ah, AR5K_KEYTABLE_TYPE_NULL, + AR5K_KEYTABLE_TYPE(micentry)); + } + } + + return 0; +} + +/* + * Check if a table entry is valid + */ +int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry) +{ + ATH5K_TRACE(ah->ah_sc); + AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE); + + /* Check the validation flag at the end of the entry */ + return ath5k_hw_reg_read(ah, AR5K_KEYTABLE_MAC1(entry)) & + AR5K_KEYTABLE_VALID; +} + +static +int ath5k_keycache_type(const struct ieee80211_key_conf *key) +{ + switch (key->alg) { + case ALG_TKIP: + return AR5K_KEYTABLE_TYPE_TKIP; + case ALG_CCMP: + return AR5K_KEYTABLE_TYPE_CCM; + case ALG_WEP: + if (key->keylen == WLAN_KEY_LEN_WEP40) + return AR5K_KEYTABLE_TYPE_40; + else if (key->keylen == WLAN_KEY_LEN_WEP104) + return AR5K_KEYTABLE_TYPE_104; + return -EINVAL; + default: + return -EINVAL; + } + return -EINVAL; +} + +/* + * Set a key entry on the table + */ +int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry, + const struct ieee80211_key_conf *key, const u8 *mac) +{ + unsigned int i; + int keylen; + __le32 key_v[5] = {}; + __le32 key0 = 0, key1 = 0; + __le32 *rxmic, *txmic; + int keytype; + u16 micentry = entry + AR5K_KEYTABLE_MIC_OFFSET; + bool is_tkip; + const u8 *key_ptr; + + ATH5K_TRACE(ah->ah_sc); + + is_tkip = (key->alg == ALG_TKIP); + + /* + * key->keylen comes in from mac80211 in bytes. + * TKIP is 128 bit + 128 bit mic + */ + keylen = (is_tkip) ? (128 / 8) : key->keylen; + + if (entry > AR5K_KEYTABLE_SIZE || + (is_tkip && micentry > AR5K_KEYTABLE_SIZE)) + return -EOPNOTSUPP; + + if (unlikely(keylen > 16)) + return -EOPNOTSUPP; + + keytype = ath5k_keycache_type(key); + if (keytype < 0) + return keytype; + + /* + * each key block is 6 bytes wide, written as pairs of + * alternating 32 and 16 bit le values. + */ + key_ptr = key->key; + for (i = 0; keylen >= 6; keylen -= 6) { + memcpy(&key_v[i], key_ptr, 6); + i += 2; + key_ptr += 6; + } + if (keylen) + memcpy(&key_v[i], key_ptr, keylen); + + /* intentionally corrupt key until mic is installed */ + if (is_tkip) { + key0 = key_v[0] = ~key_v[0]; + key1 = key_v[1] = ~key_v[1]; + } + + for (i = 0; i < ARRAY_SIZE(key_v); i++) + ath5k_hw_reg_write(ah, le32_to_cpu(key_v[i]), + AR5K_KEYTABLE_OFF(entry, i)); + + ath5k_hw_reg_write(ah, keytype, AR5K_KEYTABLE_TYPE(entry)); + + if (is_tkip) { + /* Install rx/tx MIC */ + rxmic = (__le32 *) &key->key[16]; + txmic = (__le32 *) &key->key[24]; + + if (ah->ah_combined_mic) { + key_v[0] = rxmic[0]; + key_v[1] = cpu_to_le32(le32_to_cpu(txmic[0]) >> 16); + key_v[2] = rxmic[1]; + key_v[3] = cpu_to_le32(le32_to_cpu(txmic[0]) & 0xffff); + key_v[4] = txmic[1]; + } else { + key_v[0] = rxmic[0]; + key_v[1] = 0; + key_v[2] = rxmic[1]; + key_v[3] = 0; + key_v[4] = 0; + } + for (i = 0; i < ARRAY_SIZE(key_v); i++) + ath5k_hw_reg_write(ah, le32_to_cpu(key_v[i]), + AR5K_KEYTABLE_OFF(micentry, i)); + + ath5k_hw_reg_write(ah, AR5K_KEYTABLE_TYPE_NULL, + AR5K_KEYTABLE_TYPE(micentry)); + ath5k_hw_reg_write(ah, 0, AR5K_KEYTABLE_MAC0(micentry)); + ath5k_hw_reg_write(ah, 0, AR5K_KEYTABLE_MAC1(micentry)); + + /* restore first 2 words of key */ + ath5k_hw_reg_write(ah, le32_to_cpu(~key0), + AR5K_KEYTABLE_OFF(entry, 0)); + ath5k_hw_reg_write(ah, le32_to_cpu(~key1), + AR5K_KEYTABLE_OFF(entry, 1)); + } + + return ath5k_hw_set_key_lladdr(ah, entry, mac); +} + +int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac) +{ + u32 low_id, high_id; + + ATH5K_TRACE(ah->ah_sc); + /* Invalid entry (key table overflow) */ + AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE); + + /* MAC may be NULL if it's a broadcast key. In this case no need to + * to compute AR5K_LOW_ID and AR5K_HIGH_ID as we already know it. */ + if (!mac) { + low_id = 0xffffffff; + high_id = 0xffff | AR5K_KEYTABLE_VALID; + } else { + low_id = AR5K_LOW_ID(mac); + high_id = AR5K_HIGH_ID(mac) | AR5K_KEYTABLE_VALID; + } + + ath5k_hw_reg_write(ah, low_id, AR5K_KEYTABLE_MAC0(entry)); + ath5k_hw_reg_write(ah, high_id, AR5K_KEYTABLE_MAC1(entry)); + + return 0; +} + |