diff options
Diffstat (limited to 'drivers/net/wireless/ath9k/beacon.c')
| -rw-r--r-- | drivers/net/wireless/ath9k/beacon.c | 394 |
1 files changed, 150 insertions, 244 deletions
diff --git a/drivers/net/wireless/ath9k/beacon.c b/drivers/net/wireless/ath9k/beacon.c index caf569401a3..9e15c30bbc0 100644 --- a/drivers/net/wireless/ath9k/beacon.c +++ b/drivers/net/wireless/ath9k/beacon.c @@ -16,7 +16,6 @@ /* Implementation of beacon processing. */ -#include <asm/unaligned.h> #include "core.h" /* @@ -26,14 +25,13 @@ * the operating mode of the station (AP or AdHoc). Parameters are AIFS * settings and channel width min/max */ - static int ath_beaconq_config(struct ath_softc *sc) { struct ath_hal *ah = sc->sc_ah; struct ath9k_tx_queue_info qi; ath9k_hw_get_txq_props(ah, sc->sc_bhalq, &qi); - if (sc->sc_opmode == ATH9K_M_HOSTAP) { + if (sc->sc_ah->ah_opmode == ATH9K_M_HOSTAP) { /* Always burst out beacon and CAB traffic. */ qi.tqi_aifs = 1; qi.tqi_cwmin = 0; @@ -63,19 +61,18 @@ static int ath_beaconq_config(struct ath_softc *sc) * up all required antenna switch parameters, rate codes, and channel flags. * Beacons are always sent out at the lowest rate, and are not retried. */ - static void ath_beacon_setup(struct ath_softc *sc, - struct ath_vap *avp, struct ath_buf *bf) + struct ath_vap *avp, struct ath_buf *bf) { struct sk_buff *skb = (struct sk_buff *)bf->bf_mpdu; struct ath_hal *ah = sc->sc_ah; struct ath_desc *ds; - int flags, antenna; + struct ath9k_11n_rate_series series[4]; const struct ath9k_rate_table *rt; + int flags, antenna; u8 rix, rate; int ctsrate = 0; int ctsduration = 0; - struct ath9k_11n_rate_series series[4]; DPRINTF(sc, ATH_DBG_BEACON, "%s: m %p len %u\n", __func__, skb, skb->len); @@ -85,7 +82,7 @@ static void ath_beacon_setup(struct ath_softc *sc, flags = ATH9K_TXDESC_NOACK; - if (sc->sc_opmode == ATH9K_M_IBSS && + if (sc->sc_ah->ah_opmode == ATH9K_M_IBSS && (ah->ah_caps.hw_caps & ATH9K_HW_CAP_VEOL)) { ds->ds_link = bf->bf_daddr; /* self-linked */ flags |= ATH9K_TXDESC_VEOL; @@ -111,27 +108,28 @@ static void ath_beacon_setup(struct ath_softc *sc, rix = 0; rt = sc->sc_currates; rate = rt->info[rix].rateCode; - if (sc->sc_flags & ATH_PREAMBLE_SHORT) + if (sc->sc_flags & SC_OP_PREAMBLE_SHORT) rate |= rt->info[rix].shortPreamble; - ath9k_hw_set11n_txdesc(ah, ds - , skb->len + FCS_LEN /* frame length */ - , ATH9K_PKT_TYPE_BEACON /* Atheros packet type */ - , avp->av_btxctl.txpower /* txpower XXX */ - , ATH9K_TXKEYIX_INVALID /* no encryption */ - , ATH9K_KEY_TYPE_CLEAR /* no encryption */ - , flags /* no ack, veol for beacons */ + ath9k_hw_set11n_txdesc(ah, ds, + skb->len + FCS_LEN, /* frame length */ + ATH9K_PKT_TYPE_BEACON, /* Atheros packet type */ + avp->av_btxctl.txpower, /* txpower XXX */ + ATH9K_TXKEYIX_INVALID, /* no encryption */ + ATH9K_KEY_TYPE_CLEAR, /* no encryption */ + flags /* no ack, + veol for beacons */ ); /* NB: beacon's BufLen must be a multiple of 4 bytes */ - ath9k_hw_filltxdesc(ah, ds - , roundup(skb->len, 4) /* buffer length */ - , true /* first segment */ - , true /* last segment */ - , ds /* first descriptor */ + ath9k_hw_filltxdesc(ah, ds, + roundup(skb->len, 4), /* buffer length */ + true, /* first segment */ + true, /* last segment */ + ds /* first descriptor */ ); - memzero(series, sizeof(struct ath9k_11n_rate_series) * 4); + memset(series, 0, sizeof(struct ath9k_11n_rate_series) * 4); series[0].Tries = 1; series[0].Rate = rate; series[0].ChSel = sc->sc_tx_chainmask; @@ -140,55 +138,6 @@ static void ath_beacon_setup(struct ath_softc *sc, ctsrate, ctsduration, series, 4, 0); } -/* Move everything from the vap's mcast queue to the hardware cab queue. - * Caller must hold mcasq lock and cabq lock - * XXX MORE_DATA bit? - */ -static void empty_mcastq_into_cabq(struct ath_hal *ah, - struct ath_txq *mcastq, struct ath_txq *cabq) -{ - struct ath_buf *bfmcast; - - BUG_ON(list_empty(&mcastq->axq_q)); - - bfmcast = list_first_entry(&mcastq->axq_q, struct ath_buf, list); - - /* link the descriptors */ - if (!cabq->axq_link) - ath9k_hw_puttxbuf(ah, cabq->axq_qnum, bfmcast->bf_daddr); - else - *cabq->axq_link = bfmcast->bf_daddr; - - /* append the private vap mcast list to the cabq */ - - cabq->axq_depth += mcastq->axq_depth; - cabq->axq_totalqueued += mcastq->axq_totalqueued; - cabq->axq_linkbuf = mcastq->axq_linkbuf; - cabq->axq_link = mcastq->axq_link; - list_splice_tail_init(&mcastq->axq_q, &cabq->axq_q); - mcastq->axq_depth = 0; - mcastq->axq_totalqueued = 0; - mcastq->axq_linkbuf = NULL; - mcastq->axq_link = NULL; -} - -/* This is only run at DTIM. We move everything from the vap's mcast queue - * to the hardware cab queue. Caller must hold the mcastq lock. */ -static void trigger_mcastq(struct ath_hal *ah, - struct ath_txq *mcastq, struct ath_txq *cabq) -{ - spin_lock_bh(&cabq->axq_lock); - - if (!list_empty(&mcastq->axq_q)) - empty_mcastq_into_cabq(ah, mcastq, cabq); - - /* cabq is gated by beacon so it is safe to start here */ - if (!list_empty(&cabq->axq_q)) - ath9k_hw_txstart(ah, cabq->axq_qnum); - - spin_unlock_bh(&cabq->axq_lock); -} - /* * Generate beacon frame and queue cab data for a vap. * @@ -199,57 +148,56 @@ static void trigger_mcastq(struct ath_hal *ah, */ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id) { - struct ath_hal *ah = sc->sc_ah; struct ath_buf *bf; struct ath_vap *avp; struct sk_buff *skb; - int cabq_depth; - int mcastq_depth; - int is_beacon_dtim = 0; - unsigned int curlen; struct ath_txq *cabq; - struct ath_txq *mcastq; + struct ieee80211_tx_info *info; + int cabq_depth; + avp = sc->sc_vaps[if_id]; + ASSERT(avp); - mcastq = &avp->av_mcastq; cabq = sc->sc_cabq; - ASSERT(avp); - if (avp->av_bcbuf == NULL) { DPRINTF(sc, ATH_DBG_BEACON, "%s: avp=%p av_bcbuf=%p\n", __func__, avp, avp->av_bcbuf); return NULL; } + bf = avp->av_bcbuf; - skb = (struct sk_buff *) bf->bf_mpdu; + skb = (struct sk_buff *)bf->bf_mpdu; + if (skb) { + pci_unmap_single(sc->pdev, bf->bf_dmacontext, + skb_end_pointer(skb) - skb->head, + PCI_DMA_TODEVICE); + } - /* - * Update dynamic beacon contents. If this returns - * non-zero then we need to remap the memory because - * the beacon frame changed size (probably because - * of the TIM bitmap). - */ - curlen = skb->len; - - /* XXX: spin_lock_bh should not be used here, but sparse bitches - * otherwise. We should fix sparse :) */ - spin_lock_bh(&mcastq->axq_lock); - mcastq_depth = avp->av_mcastq.axq_depth; - - if (ath_update_beacon(sc, if_id, &avp->av_boff, skb, mcastq_depth) == - 1) { - ath_skb_unmap_single(sc, skb, PCI_DMA_TODEVICE, - get_dma_mem_context(bf, bf_dmacontext)); - bf->bf_buf_addr = ath_skb_map_single(sc, skb, PCI_DMA_TODEVICE, - get_dma_mem_context(bf, bf_dmacontext)); - } else { - pci_dma_sync_single_for_cpu(sc->pdev, - bf->bf_buf_addr, - skb_tailroom(skb), - PCI_DMA_TODEVICE); + skb = ieee80211_beacon_get(sc->hw, avp->av_if_data); + bf->bf_mpdu = skb; + if (skb == NULL) + return NULL; + + info = IEEE80211_SKB_CB(skb); + if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { + /* + * TODO: make sure the seq# gets assigned properly (vs. other + * TX frames) + */ + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + sc->seq_no += 0x10; + hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); + hdr->seq_ctrl |= cpu_to_le16(sc->seq_no); } + bf->bf_buf_addr = bf->bf_dmacontext = + pci_map_single(sc->pdev, skb->data, + skb_end_pointer(skb) - skb->head, + PCI_DMA_TODEVICE); + + skb = ieee80211_get_buffered_bc(sc->hw, avp->av_if_data); + /* * if the CABQ traffic from previous DTIM is pending and the current * beacon is also a DTIM. @@ -262,9 +210,7 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id) cabq_depth = cabq->axq_depth; spin_unlock_bh(&cabq->axq_lock); - is_beacon_dtim = avp->av_boff.bo_tim[4] & 1; - - if (mcastq_depth && is_beacon_dtim && cabq_depth) { + if (skb && cabq_depth) { /* * Unlock the cabq lock as ath_tx_draintxq acquires * the lock again which is a common function and that @@ -284,10 +230,11 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id) * Enable the CAB queue before the beacon queue to * insure cab frames are triggered by this beacon. */ - if (is_beacon_dtim) - trigger_mcastq(ah, mcastq, cabq); + while (skb) { + ath_tx_cabq(sc, skb); + skb = ieee80211_get_buffered_bc(sc->hw, avp->av_if_data); + } - spin_unlock_bh(&mcastq->axq_lock); return bf; } @@ -295,7 +242,6 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id) * Startup beacon transmission for adhoc mode when they are sent entirely * by the hardware using the self-linked descriptor + veol trick. */ - static void ath_beacon_start_adhoc(struct ath_softc *sc, int if_id) { struct ath_hal *ah = sc->sc_ah; @@ -332,12 +278,11 @@ static void ath_beacon_start_adhoc(struct ath_softc *sc, int if_id) * min/max, and enable aifs). The info structure does not need to be * persistant. */ - int ath_beaconq_setup(struct ath_hal *ah) { struct ath9k_tx_queue_info qi; - memzero(&qi, sizeof(qi)); + memset(&qi, 0, sizeof(qi)); qi.tqi_aifs = 1; qi.tqi_cwmin = 0; qi.tqi_cwmax = 0; @@ -353,29 +298,27 @@ int ath_beaconq_setup(struct ath_hal *ah) * the ATH interface. This routine also calculates the beacon "slot" for * staggared beacons in the mBSSID case. */ - int ath_beacon_alloc(struct ath_softc *sc, int if_id) { struct ath_vap *avp; - struct ieee80211_hdr *wh; + struct ieee80211_hdr *hdr; struct ath_buf *bf; struct sk_buff *skb; + __le64 tstamp; avp = sc->sc_vaps[if_id]; ASSERT(avp); /* Allocate a beacon descriptor if we haven't done so. */ if (!avp->av_bcbuf) { - /* - * Allocate beacon state for hostap/ibss. We know - * a buffer is available. - */ + /* Allocate beacon state for hostap/ibss. We know + * a buffer is available. */ avp->av_bcbuf = list_first_entry(&sc->sc_bbuf, - struct ath_buf, list); + struct ath_buf, list); list_del(&avp->av_bcbuf->list); - if (sc->sc_opmode == ATH9K_M_HOSTAP || + if (sc->sc_ah->ah_opmode == ATH9K_M_HOSTAP || !(sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_VEOL)) { int slot; /* @@ -408,17 +351,16 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id) bf = avp->av_bcbuf; if (bf->bf_mpdu != NULL) { skb = (struct sk_buff *)bf->bf_mpdu; - ath_skb_unmap_single(sc, skb, PCI_DMA_TODEVICE, - get_dma_mem_context(bf, bf_dmacontext)); + pci_unmap_single(sc->pdev, bf->bf_dmacontext, + skb_end_pointer(skb) - skb->head, + PCI_DMA_TODEVICE); dev_kfree_skb_any(skb); bf->bf_mpdu = NULL; } /* - * NB: the beacon data buffer must be 32-bit aligned; - * we assume the wbuf routines will return us something - * with this alignment (perhaps should assert). - * FIXME: Fill avp->av_boff.bo_tim,avp->av_btxctl.txpower and + * NB: the beacon data buffer must be 32-bit aligned. + * FIXME: Fill avp->av_btxctl.txpower and * avp->av_btxctl.shortPreamble */ skb = ieee80211_beacon_get(sc->hw, avp->av_if_data); @@ -428,6 +370,9 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id) return -ENOMEM; } + tstamp = ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp; + sc->bc_tstamp = le64_to_cpu(tstamp); + /* * Calculate a TSF adjustment factor required for * staggered beacons. Note that we assume the format @@ -439,9 +384,8 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id) __le64 val; int intval; - /* FIXME: Use default value for now: Sujith */ - - intval = ATH_DEFAULT_BINTVAL; + intval = sc->hw->conf.beacon_int ? + sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL; /* * The beacon interval is in TU's; the TSF in usecs. @@ -462,12 +406,14 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id) __func__, "stagger", avp->av_bslot, intval, (unsigned long long)tsfadjust); - wh = (struct ieee80211_hdr *)skb->data; - memcpy(&wh[1], &val, sizeof(val)); + hdr = (struct ieee80211_hdr *)skb->data; + memcpy(&hdr[1], &val, sizeof(val)); } - bf->bf_buf_addr = ath_skb_map_single(sc, skb, PCI_DMA_TODEVICE, - get_dma_mem_context(bf, bf_dmacontext)); + bf->bf_buf_addr = bf->bf_dmacontext = + pci_map_single(sc->pdev, skb->data, + skb_end_pointer(skb) - skb->head, + PCI_DMA_TODEVICE); bf->bf_mpdu = skb; return 0; @@ -477,9 +423,8 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id) * Reclaim beacon resources and return buffer to the pool. * * Checks the VAP to put the beacon frame buffer back to the ATH object - * queue, and de-allocates any wbuf frames that were sent as CAB traffic. + * queue, and de-allocates any skbs that were sent as CAB traffic. */ - void ath_beacon_return(struct ath_softc *sc, struct ath_vap *avp) { if (avp->av_bcbuf != NULL) { @@ -493,8 +438,9 @@ void ath_beacon_return(struct ath_softc *sc, struct ath_vap *avp) bf = avp->av_bcbuf; if (bf->bf_mpdu != NULL) { struct sk_buff *skb = (struct sk_buff *)bf->bf_mpdu; - ath_skb_unmap_single(sc, skb, PCI_DMA_TODEVICE, - get_dma_mem_context(bf, bf_dmacontext)); + pci_unmap_single(sc->pdev, bf->bf_dmacontext, + skb_end_pointer(skb) - skb->head, + PCI_DMA_TODEVICE); dev_kfree_skb_any(skb); bf->bf_mpdu = NULL; } @@ -505,44 +451,14 @@ void ath_beacon_return(struct ath_softc *sc, struct ath_vap *avp) } /* - * Reclaim beacon resources and return buffer to the pool. - * - * This function will free any wbuf frames that are still attached to the - * beacon buffers in the ATH object. Note that this does not de-allocate - * any wbuf objects that are in the transmit queue and have not yet returned - * to the ATH object. -*/ - -void ath_beacon_free(struct ath_softc *sc) -{ - struct ath_buf *bf; - - list_for_each_entry(bf, &sc->sc_bbuf, list) { - if (bf->bf_mpdu != NULL) { - struct sk_buff *skb = (struct sk_buff *) bf->bf_mpdu; - ath_skb_unmap_single(sc, skb, PCI_DMA_TODEVICE, - get_dma_mem_context(bf, bf_dmacontext)); - dev_kfree_skb_any(skb); - bf->bf_mpdu = NULL; - } - } -} - -/* * Tasklet for Sending Beacons * * Transmit one or more beacon frames at SWBA. Dynamic updates to the frame * contents are done as needed and the slot time is also adjusted based on * current state. - * - * This tasklet is not scheduled, it's called in ISR context. */ - void ath9k_beacon_tasklet(unsigned long data) { -#define TSF_TO_TU(_h,_l) \ - ((((u32)(_h)) << 22) | (((u32)(_l)) >> 10)) - struct ath_softc *sc = (struct ath_softc *)data; struct ath_hal *ah = sc->sc_ah; struct ath_buf *bf = NULL; @@ -555,7 +471,7 @@ void ath9k_beacon_tasklet(unsigned long data) u32 tsftu; u16 intval; - if (sc->sc_noreset) { + if (sc->sc_flags & SC_OP_NO_RESET) { show_cycles = ath9k_hw_GetMibCycleCountsPct(ah, &rx_clear, &rx_frame, @@ -568,6 +484,8 @@ void ath9k_beacon_tasklet(unsigned long data) * and wait for the next. Missed beacons indicate * a problem and should not occur. If we miss too * many consecutive beacons reset the device. + * + * FIXME: Clean up this mess !! */ if (ath9k_hw_numtxpending(ah, sc->sc_bhalq) != 0) { sc->sc_bmisscount++; @@ -577,25 +495,22 @@ void ath9k_beacon_tasklet(unsigned long data) * (in that layer). */ if (sc->sc_bmisscount < BSTUCK_THRESH) { - if (sc->sc_noreset) { + if (sc->sc_flags & SC_OP_NO_RESET) { DPRINTF(sc, ATH_DBG_BEACON, "%s: missed %u consecutive beacons\n", __func__, sc->sc_bmisscount); if (show_cycles) { /* - * Display cycle counter stats - * from HW to aide in debug of - * stickiness. + * Display cycle counter stats from HW + * to aide in debug of stickiness. */ - DPRINTF(sc, - ATH_DBG_BEACON, + DPRINTF(sc, ATH_DBG_BEACON, "%s: busy times: rx_clear=%d, " "rx_frame=%d, tx_frame=%d\n", __func__, rx_clear, rx_frame, tx_frame); } else { - DPRINTF(sc, - ATH_DBG_BEACON, + DPRINTF(sc, ATH_DBG_BEACON, "%s: unable to obtain " "busy times\n", __func__); } @@ -605,10 +520,9 @@ void ath9k_beacon_tasklet(unsigned long data) __func__, sc->sc_bmisscount); } } else if (sc->sc_bmisscount >= BSTUCK_THRESH) { - if (sc->sc_noreset) { + if (sc->sc_flags & SC_OP_NO_RESET) { if (sc->sc_bmisscount == BSTUCK_THRESH) { - DPRINTF(sc, - ATH_DBG_BEACON, + DPRINTF(sc, ATH_DBG_BEACON, "%s: beacon is officially " "stuck\n", __func__); ath9k_hw_dmaRegDump(ah); @@ -620,13 +534,12 @@ void ath9k_beacon_tasklet(unsigned long data) ath_bstuck_process(sc); } } - return; } + if (sc->sc_bmisscount != 0) { - if (sc->sc_noreset) { - DPRINTF(sc, - ATH_DBG_BEACON, + if (sc->sc_flags & SC_OP_NO_RESET) { + DPRINTF(sc, ATH_DBG_BEACON, "%s: resume beacon xmit after %u misses\n", __func__, sc->sc_bmisscount); } else { @@ -643,17 +556,19 @@ void ath9k_beacon_tasklet(unsigned long data) * on the tsf to safeguard against missing an swba. */ - /* FIXME: Use default value for now - Sujith */ - intval = ATH_DEFAULT_BINTVAL; + intval = sc->hw->conf.beacon_int ? + sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL; tsf = ath9k_hw_gettsf64(ah); tsftu = TSF_TO_TU(tsf>>32, tsf); slot = ((tsftu % intval) * ATH_BCBUF) / intval; if_id = sc->sc_bslot[(slot + 1) % ATH_BCBUF]; + DPRINTF(sc, ATH_DBG_BEACON, - "%s: slot %d [tsf %llu tsftu %u intval %u] if_id %d\n", - __func__, slot, (unsigned long long) tsf, tsftu, - intval, if_id); + "%s: slot %d [tsf %llu tsftu %u intval %u] if_id %d\n", + __func__, slot, (unsigned long long)tsf, tsftu, + intval, if_id); + bfaddr = 0; if (if_id != ATH_IF_ID_ANY) { bf = ath_beacon_generate(sc, if_id); @@ -704,22 +619,20 @@ void ath9k_beacon_tasklet(unsigned long data) sc->ast_be_xmit += bc; /* XXX per-vap? */ } -#undef TSF_TO_TU } /* * Tasklet for Beacon Stuck processing * * Processing for Beacon Stuck. - * Basically calls the ath_internal_reset function to reset the chip. + * Basically resets the chip. */ - void ath_bstuck_process(struct ath_softc *sc) { DPRINTF(sc, ATH_DBG_BEACON, "%s: stuck beacon; resetting (bmiss count %u)\n", __func__, sc->sc_bmisscount); - ath_internal_reset(sc); + ath_reset(sc, false); } /* @@ -737,40 +650,32 @@ void ath_bstuck_process(struct ath_softc *sc) * interrupt when we stop seeing beacons from the AP * we've associated with. */ - void ath_beacon_config(struct ath_softc *sc, int if_id) { -#define TSF_TO_TU(_h,_l) \ - ((((u32)(_h)) << 22) | (((u32)(_l)) >> 10)) struct ath_hal *ah = sc->sc_ah; - u32 nexttbtt, intval; struct ath_beacon_config conf; enum ath9k_opmode av_opmode; + u32 nexttbtt, intval; if (if_id != ATH_IF_ID_ANY) av_opmode = sc->sc_vaps[if_id]->av_opmode; else - av_opmode = sc->sc_opmode; + av_opmode = sc->sc_ah->ah_opmode; - memzero(&conf, sizeof(struct ath_beacon_config)); + memset(&conf, 0, sizeof(struct ath_beacon_config)); - /* FIXME: Use default values for now - Sujith */ - /* Query beacon configuration first */ - /* - * Protocol stack doesn't support dynamic beacon configuration, - * use default configurations. - */ - conf.beacon_interval = ATH_DEFAULT_BINTVAL; + conf.beacon_interval = sc->hw->conf.beacon_int ? + sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL; conf.listen_interval = 1; conf.dtim_period = conf.beacon_interval; conf.dtim_count = 1; conf.bmiss_timeout = ATH_DEFAULT_BMISS_LIMIT * conf.beacon_interval; /* extract tstamp from last beacon and convert to TU */ - nexttbtt = TSF_TO_TU(get_unaligned_le32(conf.u.last_tstamp + 4), - get_unaligned_le32(conf.u.last_tstamp)); + nexttbtt = TSF_TO_TU(sc->bc_tstamp >> 32, sc->bc_tstamp); + /* XXX conditionalize multi-bss support? */ - if (sc->sc_opmode == ATH9K_M_HOSTAP) { + if (sc->sc_ah->ah_opmode == ATH9K_M_HOSTAP) { /* * For multi-bss ap support beacons are either staggered * evenly over N slots or burst together. For the former @@ -784,14 +689,16 @@ void ath_beacon_config(struct ath_softc *sc, int if_id) intval = conf.beacon_interval & ATH9K_BEACON_PERIOD; } - if (nexttbtt == 0) /* e.g. for ap mode */ + if (nexttbtt == 0) /* e.g. for ap mode */ nexttbtt = intval; - else if (intval) /* NB: can be 0 for monitor mode */ + else if (intval) /* NB: can be 0 for monitor mode */ nexttbtt = roundup(nexttbtt, intval); + DPRINTF(sc, ATH_DBG_BEACON, "%s: nexttbtt %u intval %u (%u)\n", __func__, nexttbtt, intval, conf.beacon_interval); + /* Check for ATH9K_M_HOSTAP and sc_nostabeacons for WDS client */ - if (sc->sc_opmode == ATH9K_M_STA) { + if (sc->sc_ah->ah_opmode == ATH9K_M_STA) { struct ath9k_beacon_state bs; u64 tsf; u32 tsftu; @@ -803,19 +710,19 @@ void ath_beacon_config(struct ath_softc *sc, int if_id) * last beacon we received (which may be none). */ dtimperiod = conf.dtim_period; - if (dtimperiod <= 0) /* NB: 0 if not known */ + if (dtimperiod <= 0) /* NB: 0 if not known */ dtimperiod = 1; dtimcount = conf.dtim_count; - if (dtimcount >= dtimperiod) /* NB: sanity check */ - dtimcount = 0; /* XXX? */ - cfpperiod = 1; /* NB: no PCF support yet */ + if (dtimcount >= dtimperiod) /* NB: sanity check */ + dtimcount = 0; + cfpperiod = 1; /* NB: no PCF support yet */ cfpcount = 0; sleepduration = conf.listen_interval * intval; if (sleepduration <= 0) sleepduration = intval; -#define FUDGE 2 +#define FUDGE 2 /* * Pull nexttbtt forward to reflect the current * TSF and calculate dtim+cfp state for the result. @@ -831,7 +738,7 @@ void ath_beacon_config(struct ath_softc *sc, int if_id) } } while (nexttbtt < tsftu); #undef FUDGE - memzero(&bs, sizeof(bs)); + memset(&bs, 0, sizeof(bs)); bs.bs_intval = intval; bs.bs_nexttbtt = nexttbtt; bs.bs_dtimperiod = dtimperiod*intval; @@ -839,6 +746,7 @@ void ath_beacon_config(struct ath_softc *sc, int if_id) bs.bs_cfpperiod = cfpperiod*bs.bs_dtimperiod; bs.bs_cfpnext = bs.bs_nextdtim + cfpcount*bs.bs_dtimperiod; bs.bs_cfpmaxduration = 0; + /* * Calculate the number of consecutive beacons to miss * before taking a BMISS interrupt. The configuration @@ -847,9 +755,8 @@ void ath_beacon_config(struct ath_softc *sc, int if_id) * result to at most 15 beacons. */ if (sleepduration > intval) { - bs.bs_bmissthreshold = - conf.listen_interval * - ATH_DEFAULT_BMISS_LIMIT / 2; + bs.bs_bmissthreshold = conf.listen_interval * + ATH_DEFAULT_BMISS_LIMIT / 2; } else { bs.bs_bmissthreshold = DIV_ROUND_UP(conf.bmiss_timeout, intval); @@ -869,8 +776,8 @@ void ath_beacon_config(struct ath_softc *sc, int if_id) * XXX fixed at 100ms */ - bs.bs_sleepduration = - roundup(IEEE80211_MS_TO_TU(100), sleepduration); + bs.bs_sleepduration = roundup(IEEE80211_MS_TO_TU(100), + sleepduration); if (bs.bs_sleepduration > bs.bs_dtimperiod) bs.bs_sleepduration = bs.bs_dtimperiod; @@ -886,19 +793,19 @@ void ath_beacon_config(struct ath_softc *sc, int if_id) "cfp:period %u " "maxdur %u " "next %u " - "timoffset %u\n" - , __func__ - , (unsigned long long)tsf, tsftu - , bs.bs_intval - , bs.bs_nexttbtt - , bs.bs_dtimperiod - , bs.bs_nextdtim - , bs.bs_bmissthreshold - , bs.bs_sleepduration - , bs.bs_cfpperiod - , bs.bs_cfpmaxduration - , bs.bs_cfpnext - , bs.bs_timoffset + "timoffset %u\n", + __func__, + (unsigned long long)tsf, tsftu, + bs.bs_intval, + bs.bs_nexttbtt, + bs.bs_dtimperiod, + bs.bs_nextdtim, + bs.bs_bmissthreshold, + bs.bs_sleepduration, + bs.bs_cfpperiod, + bs.bs_cfpmaxduration, + bs.bs_cfpnext, + bs.bs_timoffset ); ath9k_hw_set_interrupts(ah, 0); @@ -911,12 +818,12 @@ void ath_beacon_config(struct ath_softc *sc, int if_id) ath9k_hw_set_interrupts(ah, 0); if (nexttbtt == intval) intval |= ATH9K_BEACON_RESET_TSF; - if (sc->sc_opmode == ATH9K_M_IBSS) { + if (sc->sc_ah->ah_opmode == ATH9K_M_IBSS) { /* * Pull nexttbtt forward to reflect the current - * TSF . + * TSF */ -#define FUDGE 2 +#define FUDGE 2 if (!(intval & ATH9K_BEACON_RESET_TSF)) { tsf = ath9k_hw_gettsf64(ah); tsftu = TSF_TO_TU((u32)(tsf>>32), @@ -943,7 +850,7 @@ void ath_beacon_config(struct ath_softc *sc, int if_id) if (!(ah->ah_caps.hw_caps & ATH9K_HW_CAP_VEOL)) sc->sc_imask |= ATH9K_INT_SWBA; ath_beaconq_config(sc); - } else if (sc->sc_opmode == ATH9K_M_HOSTAP) { + } else if (sc->sc_ah->ah_opmode == ATH9K_M_HOSTAP) { /* * In AP mode we enable the beacon timers and * SWBA interrupts to prepare beacon frames. @@ -959,11 +866,10 @@ void ath_beacon_config(struct ath_softc *sc, int if_id) * When using a self-linked beacon descriptor in * ibss mode load it once here. */ - if (sc->sc_opmode == ATH9K_M_IBSS && + if (sc->sc_ah->ah_opmode == ATH9K_M_IBSS && (ah->ah_caps.hw_caps & ATH9K_HW_CAP_VEOL)) ath_beacon_start_adhoc(sc, 0); } -#undef TSF_TO_TU } /* Function to collect beacon rssi data and resync beacon if necessary */ @@ -975,5 +881,5 @@ void ath_beacon_sync(struct ath_softc *sc, int if_id) * beacon frame we just received. */ ath_beacon_config(sc, if_id); - sc->sc_beacons = 1; + sc->sc_flags |= SC_OP_BEACONS; } |