diff options
Diffstat (limited to 'drivers/net/wireless/brcm80211')
18 files changed, 2061 insertions, 1806 deletions
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/Makefile b/drivers/net/wireless/brcm80211/brcmfmac/Makefile index 57cddee0325..1d2ceac3a22 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/Makefile +++ b/drivers/net/wireless/brcm80211/brcmfmac/Makefile @@ -24,6 +24,7 @@ ccflags-y += -D__CHECK_ENDIAN__ obj-$(CONFIG_BRCMFMAC) += brcmfmac.o brcmfmac-objs += \ wl_cfg80211.o \ + chip.o \ fwil.o \ fweh.o \ fwsignal.o \ @@ -36,8 +37,7 @@ brcmfmac-objs += \ btcoex.o brcmfmac-$(CONFIG_BRCMFMAC_SDIO) += \ dhd_sdio.o \ - bcmsdh.o \ - sdio_chip.o + bcmsdh.o brcmfmac-$(CONFIG_BRCMFMAC_USB) += \ usb.o brcmfmac-$(CONFIG_BRCMDBG) += \ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c index fa35b23bbaa..a16e644e7c0 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c @@ -43,7 +43,6 @@ #include "dhd_bus.h" #include "dhd_dbg.h" #include "sdio_host.h" -#include "sdio_chip.h" #define SDIOH_API_ACCESS_RETRY_LIMIT 2 @@ -54,6 +53,12 @@ /* Maximum milliseconds to wait for F2 to come up */ #define SDIO_WAIT_F2RDY 3000 +#define BRCMF_DEFAULT_TXGLOM_SIZE 32 /* max tx frames in glom chain */ +#define BRCMF_DEFAULT_RXGLOM_SIZE 32 /* max rx frames in glom chain */ + +static int brcmf_sdiod_txglomsz = BRCMF_DEFAULT_TXGLOM_SIZE; +module_param_named(txglomsz, brcmf_sdiod_txglomsz, int, 0); +MODULE_PARM_DESC(txglomsz, "maximum tx packet chain size [SDIO]"); static irqreturn_t brcmf_sdiod_oob_irqhandler(int irq, void *dev_id) { @@ -264,26 +269,17 @@ static int brcmf_sdiod_request_data(struct brcmf_sdio_dev *sdiodev, u8 fn, break; } - if (ret) { - /* - * SleepCSR register access can fail when - * waking up the device so reduce this noise - * in the logs. - */ - if (addr != SBSDIO_FUNC1_SLEEPCSR) - brcmf_err("failed to %s data F%d@0x%05x, err: %d\n", - write ? "write" : "read", fn, addr, ret); - else - brcmf_dbg(SDIO, "failed to %s data F%d@0x%05x, err: %d\n", - write ? "write" : "read", fn, addr, ret); - } + if (ret) + brcmf_dbg(SDIO, "failed to %s data F%d@0x%05x, err: %d\n", + write ? "write" : "read", fn, addr, ret); + return ret; } static int brcmf_sdiod_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr, u8 regsz, void *data, bool write) { - u8 func_num; + u8 func; s32 retry = 0; int ret; @@ -297,9 +293,9 @@ static int brcmf_sdiod_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr, * The rest: function 1 silicon backplane core registers */ if ((addr & ~REG_F0_REG_MASK) == 0) - func_num = SDIO_FUNC_0; + func = SDIO_FUNC_0; else - func_num = SDIO_FUNC_1; + func = SDIO_FUNC_1; do { if (!write) @@ -307,16 +303,26 @@ static int brcmf_sdiod_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr, /* for retry wait for 1 ms till bus get settled down */ if (retry) usleep_range(1000, 2000); - ret = brcmf_sdiod_request_data(sdiodev, func_num, addr, regsz, + ret = brcmf_sdiod_request_data(sdiodev, func, addr, regsz, data, write); } while (ret != 0 && ret != -ENOMEDIUM && retry++ < SDIOH_API_ACCESS_RETRY_LIMIT); if (ret == -ENOMEDIUM) brcmf_bus_change_state(sdiodev->bus_if, BRCMF_BUS_NOMEDIUM); - else if (ret != 0) - brcmf_err("failed with %d\n", ret); - + else if (ret != 0) { + /* + * SleepCSR register access can fail when + * waking up the device so reduce this noise + * in the logs. + */ + if (addr != SBSDIO_FUNC1_SLEEPCSR) + brcmf_err("failed to %s data F%d@0x%05x, err: %d\n", + write ? "write" : "read", func, addr, ret); + else + brcmf_dbg(SDIO, "failed to %s data F%d@0x%05x, err: %d\n", + write ? "write" : "read", func, addr, ret); + } return ret; } @@ -488,7 +494,6 @@ static int brcmf_sdiod_sglist_rw(struct brcmf_sdio_dev *sdiodev, uint fn, struct mmc_request mmc_req; struct mmc_command mmc_cmd; struct mmc_data mmc_dat; - struct sg_table st; struct scatterlist *sgl; int ret = 0; @@ -533,16 +538,11 @@ static int brcmf_sdiod_sglist_rw(struct brcmf_sdio_dev *sdiodev, uint fn, pkt_offset = 0; pkt_next = target_list->next; - if (sg_alloc_table(&st, max_seg_cnt, GFP_KERNEL)) { - ret = -ENOMEM; - goto exit; - } - memset(&mmc_req, 0, sizeof(struct mmc_request)); memset(&mmc_cmd, 0, sizeof(struct mmc_command)); memset(&mmc_dat, 0, sizeof(struct mmc_data)); - mmc_dat.sg = st.sgl; + mmc_dat.sg = sdiodev->sgtable.sgl; mmc_dat.blksz = func_blk_sz; mmc_dat.flags = write ? MMC_DATA_WRITE : MMC_DATA_READ; mmc_cmd.opcode = SD_IO_RW_EXTENDED; @@ -558,7 +558,7 @@ static int brcmf_sdiod_sglist_rw(struct brcmf_sdio_dev *sdiodev, uint fn, while (seg_sz) { req_sz = 0; sg_cnt = 0; - sgl = st.sgl; + sgl = sdiodev->sgtable.sgl; /* prep sg table */ while (pkt_next != (struct sk_buff *)target_list) { pkt_data = pkt_next->data + pkt_offset; @@ -640,7 +640,7 @@ static int brcmf_sdiod_sglist_rw(struct brcmf_sdio_dev *sdiodev, uint fn, } exit: - sg_free_table(&st); + sg_init_table(sdiodev->sgtable.sgl, sdiodev->sgtable.orig_nents); while ((pkt_next = __skb_dequeue(&local_list)) != NULL) brcmu_pkt_buf_free_skb(pkt_next); @@ -827,7 +827,7 @@ brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address, } if (!write) memcpy(data, pkt->data, dsize); - skb_trim(pkt, dsize); + skb_trim(pkt, 0); /* Adjust for next transfer (if any) */ size -= dsize; @@ -864,6 +864,29 @@ int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, uint fn) return 0; } +static void brcmf_sdiod_sgtable_alloc(struct brcmf_sdio_dev *sdiodev) +{ + uint nents; + int err; + + if (!sdiodev->sg_support) + return; + + nents = max_t(uint, BRCMF_DEFAULT_RXGLOM_SIZE, brcmf_sdiod_txglomsz); + nents += (nents >> 4) + 1; + + WARN_ON(nents > sdiodev->max_segment_count); + + brcmf_dbg(TRACE, "nents=%d\n", nents); + err = sg_alloc_table(&sdiodev->sgtable, nents, GFP_KERNEL); + if (err < 0) { + brcmf_err("allocation failed: disable scatter-gather"); + sdiodev->sg_support = false; + } + + sdiodev->txglomsz = brcmf_sdiod_txglomsz; +} + static int brcmf_sdiod_remove(struct brcmf_sdio_dev *sdiodev) { if (sdiodev->bus) { @@ -881,6 +904,7 @@ static int brcmf_sdiod_remove(struct brcmf_sdio_dev *sdiodev) sdio_disable_func(sdiodev->func[1]); sdio_release_host(sdiodev->func[1]); + sg_free_table(&sdiodev->sgtable); sdiodev->sbwad = 0; return 0; @@ -936,6 +960,11 @@ static int brcmf_sdiod_probe(struct brcmf_sdio_dev *sdiodev) SG_MAX_SINGLE_ALLOC); sdiodev->max_segment_size = host->max_seg_size; + /* allocate scatter-gather table. sg support + * will be disabled upon allocation failure. + */ + brcmf_sdiod_sgtable_alloc(sdiodev); + /* try to attach to the target device */ sdiodev->bus = brcmf_sdio_probe(sdiodev); if (!sdiodev->bus) { @@ -960,6 +989,7 @@ static const struct sdio_device_id brcmf_sdmmc_ids[] = { {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_43362)}, {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4335_4339)}, + {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4354)}, { /* end: all zeroes */ }, }; MODULE_DEVICE_TABLE(sdio, brcmf_sdmmc_ids); @@ -1073,9 +1103,7 @@ static int brcmf_ops_sdio_suspend(struct device *dev) struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; int ret = 0; - brcmf_dbg(SDIO, "\n"); - - atomic_set(&sdiodev->suspend, true); + brcmf_dbg(SDIO, "Enter\n"); sdio_flags = sdio_get_host_pm_caps(sdiodev->func[1]); if (!(sdio_flags & MMC_PM_KEEP_POWER)) { @@ -1083,9 +1111,12 @@ static int brcmf_ops_sdio_suspend(struct device *dev) return -EINVAL; } + atomic_set(&sdiodev->suspend, true); + ret = sdio_set_host_pm_flags(sdiodev->func[1], MMC_PM_KEEP_POWER); if (ret) { brcmf_err("Failed to set pm_flags\n"); + atomic_set(&sdiodev->suspend, false); return ret; } @@ -1099,6 +1130,7 @@ static int brcmf_ops_sdio_resume(struct device *dev) struct brcmf_bus *bus_if = dev_get_drvdata(dev); struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; + brcmf_dbg(SDIO, "Enter\n"); brcmf_sdio_wd_timer(sdiodev->bus, BRCMF_WD_POLL_MS); atomic_set(&sdiodev->suspend, false); return 0; @@ -1115,14 +1147,15 @@ static struct sdio_driver brcmf_sdmmc_driver = { .remove = brcmf_ops_sdio_remove, .name = BRCMFMAC_SDIO_PDATA_NAME, .id_table = brcmf_sdmmc_ids, -#ifdef CONFIG_PM_SLEEP .drv = { + .owner = THIS_MODULE, +#ifdef CONFIG_PM_SLEEP .pm = &brcmf_sdio_pm_ops, - }, #endif /* CONFIG_PM_SLEEP */ + }, }; -static int brcmf_sdio_pd_probe(struct platform_device *pdev) +static int __init brcmf_sdio_pd_probe(struct platform_device *pdev) { brcmf_dbg(SDIO, "Enter\n"); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/chip.c b/drivers/net/wireless/brcm80211/brcmfmac/chip.c new file mode 100644 index 00000000000..df130ef53d1 --- /dev/null +++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c @@ -0,0 +1,1034 @@ +/* + * Copyright (c) 2014 Broadcom Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/list.h> +#include <linux/ssb/ssb_regs.h> +#include <linux/bcma/bcma.h> +#include <linux/bcma/bcma_regs.h> + +#include <defs.h> +#include <soc.h> +#include <brcm_hw_ids.h> +#include <brcmu_utils.h> +#include <chipcommon.h> +#include "dhd_dbg.h" +#include "chip.h" + +/* SOC Interconnect types (aka chip types) */ +#define SOCI_SB 0 +#define SOCI_AI 1 + +/* PL-368 DMP definitions */ +#define DMP_DESC_TYPE_MSK 0x0000000F +#define DMP_DESC_EMPTY 0x00000000 +#define DMP_DESC_VALID 0x00000001 +#define DMP_DESC_COMPONENT 0x00000001 +#define DMP_DESC_MASTER_PORT 0x00000003 +#define DMP_DESC_ADDRESS 0x00000005 +#define DMP_DESC_ADDRSIZE_GT32 0x00000008 +#define DMP_DESC_EOT 0x0000000F + +#define DMP_COMP_DESIGNER 0xFFF00000 +#define DMP_COMP_DESIGNER_S 20 +#define DMP_COMP_PARTNUM 0x000FFF00 +#define DMP_COMP_PARTNUM_S 8 +#define DMP_COMP_CLASS 0x000000F0 +#define DMP_COMP_CLASS_S 4 +#define DMP_COMP_REVISION 0xFF000000 +#define DMP_COMP_REVISION_S 24 +#define DMP_COMP_NUM_SWRAP 0x00F80000 +#define DMP_COMP_NUM_SWRAP_S 19 +#define DMP_COMP_NUM_MWRAP 0x0007C000 +#define DMP_COMP_NUM_MWRAP_S 14 +#define DMP_COMP_NUM_SPORT 0x00003E00 +#define DMP_COMP_NUM_SPORT_S 9 +#define DMP_COMP_NUM_MPORT 0x000001F0 +#define DMP_COMP_NUM_MPORT_S 4 + +#define DMP_MASTER_PORT_UID 0x0000FF00 +#define DMP_MASTER_PORT_UID_S 8 +#define DMP_MASTER_PORT_NUM 0x000000F0 +#define DMP_MASTER_PORT_NUM_S 4 + +#define DMP_SLAVE_ADDR_BASE 0xFFFFF000 +#define DMP_SLAVE_ADDR_BASE_S 12 +#define DMP_SLAVE_PORT_NUM 0x00000F00 +#define DMP_SLAVE_PORT_NUM_S 8 +#define DMP_SLAVE_TYPE 0x000000C0 +#define DMP_SLAVE_TYPE_S 6 +#define DMP_SLAVE_TYPE_SLAVE 0 +#define DMP_SLAVE_TYPE_BRIDGE 1 +#define DMP_SLAVE_TYPE_SWRAP 2 +#define DMP_SLAVE_TYPE_MWRAP 3 +#define DMP_SLAVE_SIZE_TYPE 0x00000030 +#define DMP_SLAVE_SIZE_TYPE_S 4 +#define DMP_SLAVE_SIZE_4K 0 +#define DMP_SLAVE_SIZE_8K 1 +#define DMP_SLAVE_SIZE_16K 2 +#define DMP_SLAVE_SIZE_DESC 3 + +/* EROM CompIdentB */ +#define CIB_REV_MASK 0xff000000 +#define CIB_REV_SHIFT 24 + +/* ARM CR4 core specific control flag bits */ +#define ARMCR4_BCMA_IOCTL_CPUHALT 0x0020 + +/* D11 core specific control flag bits */ +#define D11_BCMA_IOCTL_PHYCLOCKEN 0x0004 +#define D11_BCMA_IOCTL_PHYRESET 0x0008 + +/* chip core base & ramsize */ +/* bcm4329 */ +/* SDIO device core, ID 0x829 */ +#define BCM4329_CORE_BUS_BASE 0x18011000 +/* internal memory core, ID 0x80e */ +#define BCM4329_CORE_SOCRAM_BASE 0x18003000 +/* ARM Cortex M3 core, ID 0x82a */ +#define BCM4329_CORE_ARM_BASE 0x18002000 +#define BCM4329_RAMSIZE 0x48000 + +/* bcm43143 */ +/* SDIO device core */ +#define BCM43143_CORE_BUS_BASE 0x18002000 +/* internal memory core */ +#define BCM43143_CORE_SOCRAM_BASE 0x18004000 +/* ARM Cortex M3 core, ID 0x82a */ +#define BCM43143_CORE_ARM_BASE 0x18003000 +#define BCM43143_RAMSIZE 0x70000 + +#define CORE_SB(base, field) \ + (base + SBCONFIGOFF + offsetof(struct sbconfig, field)) +#define SBCOREREV(sbidh) \ + ((((sbidh) & SSB_IDHIGH_RCHI) >> SSB_IDHIGH_RCHI_SHIFT) | \ + ((sbidh) & SSB_IDHIGH_RCLO)) + +struct sbconfig { + u32 PAD[2]; + u32 sbipsflag; /* initiator port ocp slave flag */ + u32 PAD[3]; + u32 sbtpsflag; /* target port ocp slave flag */ + u32 PAD[11]; + u32 sbtmerrloga; /* (sonics >= 2.3) */ + u32 PAD; + u32 sbtmerrlog; /* (sonics >= 2.3) */ + u32 PAD[3]; + u32 sbadmatch3; /* address match3 */ + u32 PAD; + u32 sbadmatch2; /* address match2 */ + u32 PAD; + u32 sbadmatch1; /* address match1 */ + u32 PAD[7]; + u32 sbimstate; /* initiator agent state */ + u32 sbintvec; /* interrupt mask */ + u32 sbtmstatelow; /* target state */ + u32 sbtmstatehigh; /* target state */ + u32 sbbwa0; /* bandwidth allocation table0 */ + u32 PAD; + u32 sbimconfiglow; /* initiator configuration */ + u32 sbimconfighigh; /* initiator configuration */ + u32 sbadmatch0; /* address match0 */ + u32 PAD; + u32 sbtmconfiglow; /* target configuration */ + u32 sbtmconfighigh; /* target configuration */ + u32 sbbconfig; /* broadcast configuration */ + u32 PAD; + u32 sbbstate; /* broadcast state */ + u32 PAD[3]; + u32 sbactcnfg; /* activate configuration */ + u32 PAD[3]; + u32 sbflagst; /* current sbflags */ + u32 PAD[3]; + u32 sbidlow; /* identification */ + u32 sbidhigh; /* identification */ +}; + +struct brcmf_core_priv { + struct brcmf_core pub; + u32 wrapbase; + struct list_head list; + struct brcmf_chip_priv *chip; +}; + +/* ARM CR4 core specific control flag bits */ +#define ARMCR4_BCMA_IOCTL_CPUHALT 0x0020 + +/* D11 core specific control flag bits */ +#define D11_BCMA_IOCTL_PHYCLOCKEN 0x0004 +#define D11_BCMA_IOCTL_PHYRESET 0x0008 + +struct brcmf_chip_priv { + struct brcmf_chip pub; + const struct brcmf_buscore_ops *ops; + void *ctx; + /* assured first core is chipcommon, second core is buscore */ + struct list_head cores; + u16 num_cores; + + bool (*iscoreup)(struct brcmf_core_priv *core); + void (*coredisable)(struct brcmf_core_priv *core, u32 prereset, + u32 reset); + void (*resetcore)(struct brcmf_core_priv *core, u32 prereset, u32 reset, + u32 postreset); +}; + +static void brcmf_chip_sb_corerev(struct brcmf_chip_priv *ci, + struct brcmf_core *core) +{ + u32 regdata; + + regdata = ci->ops->read32(ci->ctx, CORE_SB(core->base, sbidhigh)); + core->rev = SBCOREREV(regdata); +} + +static bool brcmf_chip_sb_iscoreup(struct brcmf_core_priv *core) +{ + struct brcmf_chip_priv *ci; + u32 regdata; + u32 address; + + ci = core->chip; + address = CORE_SB(core->pub.base, sbtmstatelow); + regdata = ci->ops->read32(ci->ctx, address); + regdata &= (SSB_TMSLOW_RESET | SSB_TMSLOW_REJECT | + SSB_IMSTATE_REJECT | SSB_TMSLOW_CLOCK); + return SSB_TMSLOW_CLOCK == regdata; +} + +static bool brcmf_chip_ai_iscoreup(struct brcmf_core_priv *core) +{ + struct brcmf_chip_priv *ci; + u32 regdata; + bool ret; + + ci = core->chip; + regdata = ci->ops->read32(ci->ctx, core->wrapbase + BCMA_IOCTL); + ret = (regdata & (BCMA_IOCTL_FGC | BCMA_IOCTL_CLK)) == BCMA_IOCTL_CLK; + + regdata = ci->ops->read32(ci->ctx, core->wrapbase + BCMA_RESET_CTL); + ret = ret && ((regdata & BCMA_RESET_CTL_RESET) == 0); + + return ret; +} + +static void brcmf_chip_sb_coredisable(struct brcmf_core_priv *core, + u32 prereset, u32 reset) +{ + struct brcmf_chip_priv *ci; + u32 val, base; + + ci = core->chip; + base = core->pub.base; + val = ci->ops->read32(ci->ctx, CORE_SB(base, sbtmstatelow)); + if (val & SSB_TMSLOW_RESET) + return; + + val = ci->ops->read32(ci->ctx, CORE_SB(base, sbtmstatelow)); + if ((val & SSB_TMSLOW_CLOCK) != 0) { + /* + * set target reject and spin until busy is clear + * (preserve core-specific bits) + */ + val = ci->ops->read32(ci->ctx, CORE_SB(base, sbtmstatelow)); + ci->ops->write32(ci->ctx, CORE_SB(base, sbtmstatelow), + val | SSB_TMSLOW_REJECT); + + val = ci->ops->read32(ci->ctx, CORE_SB(base, sbtmstatelow)); + udelay(1); + SPINWAIT((ci->ops->read32(ci->ctx, CORE_SB(base, sbtmstatehigh)) + & SSB_TMSHIGH_BUSY), 100000); + + val = ci->ops->read32(ci->ctx, CORE_SB(base, sbtmstatehigh)); + if (val & SSB_TMSHIGH_BUSY) + brcmf_err("core state still busy\n"); + + val = ci->ops->read32(ci->ctx, CORE_SB(base, sbidlow)); + if (val & SSB_IDLOW_INITIATOR) { + val = ci->ops->read32(ci->ctx, + CORE_SB(base, sbimstate)); + val |= SSB_IMSTATE_REJECT; + ci->ops->write32(ci->ctx, + CORE_SB(base, sbimstate), val); + val = ci->ops->read32(ci->ctx, + CORE_SB(base, sbimstate)); + udelay(1); + SPINWAIT((ci->ops->read32(ci->ctx, + CORE_SB(base, sbimstate)) & + SSB_IMSTATE_BUSY), 100000); + } + + /* set reset and reject while enabling the clocks */ + val = SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK | + SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET; + ci->ops->write32(ci->ctx, CORE_SB(base, sbtmstatelow), val); + val = ci->ops->read32(ci->ctx, CORE_SB(base, sbtmstatelow)); + udelay(10); + + /* clear the initiator reject bit */ + val = ci->ops->read32(ci->ctx, CORE_SB(base, sbidlow)); + if (val & SSB_IDLOW_INITIATOR) { + val = ci->ops->read32(ci->ctx, + CORE_SB(base, sbimstate)); + val &= ~SSB_IMSTATE_REJECT; + ci->ops->write32(ci->ctx, + CORE_SB(base, sbimstate), val); + } + } + + /* leave reset and reject asserted */ + ci->ops->write32(ci->ctx, CORE_SB(base, sbtmstatelow), + (SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET)); + udelay(1); +} + +static void brcmf_chip_ai_coredisable(struct brcmf_core_priv *core, + u32 prereset, u32 reset) +{ + struct brcmf_chip_priv *ci; + u32 regdata; + + ci = core->chip; + + /* if core is already in reset, just return */ + regdata = ci->ops->read32(ci->ctx, core->wrapbase + BCMA_RESET_CTL); + if ((regdata & BCMA_RESET_CTL_RESET) != 0) + return; + + /* configure reset */ + ci->ops->write32(ci->ctx, core->wrapbase + BCMA_IOCTL, + prereset | BCMA_IOCTL_FGC | BCMA_IOCTL_CLK); + ci->ops->read32(ci->ctx, core->wrapbase + BCMA_IOCTL); + + /* put in reset */ + ci->ops->write32(ci->ctx, core->wrapbase + BCMA_RESET_CTL, + BCMA_RESET_CTL_RESET); + usleep_range(10, 20); + + /* wait till reset is 1 */ + SPINWAIT(ci->ops->read32(ci->ctx, core->wrapbase + BCMA_RESET_CTL) != + BCMA_RESET_CTL_RESET, 300); + + /* in-reset configure */ + ci->ops->write32(ci->ctx, core->wrapbase + BCMA_IOCTL, + reset | BCMA_IOCTL_FGC | BCMA_IOCTL_CLK); + ci->ops->read32(ci->ctx, core->wrapbase + BCMA_IOCTL); +} + +static void brcmf_chip_sb_resetcore(struct brcmf_core_priv *core, u32 prereset, + u32 reset, u32 postreset) +{ + struct brcmf_chip_priv *ci; + u32 regdata; + u32 base; + + ci = core->chip; + base = core->pub.base; + /* + * Must do the disable sequence first to work for + * arbitrary current core state. + */ + brcmf_chip_sb_coredisable(core, 0, 0); + + /* + * Now do the initialization sequence. + * set reset while enabling the clock and + * forcing them on throughout the core + */ + ci->ops->write32(ci->ctx, CORE_SB(base, sbtmstatelow), + SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK | + SSB_TMSLOW_RESET); + regdata = ci->ops->read32(ci->ctx, CORE_SB(base, sbtmstatelow)); + udelay(1); + + /* clear any serror */ + regdata = ci->ops->read32(ci->ctx, CORE_SB(base, sbtmstatehigh)); + if (regdata & SSB_TMSHIGH_SERR) + ci->ops->write32(ci->ctx, CORE_SB(base, sbtmstatehigh), 0); + + regdata = ci->ops->read32(ci->ctx, CORE_SB(base, sbimstate)); + if (regdata & (SSB_IMSTATE_IBE | SSB_IMSTATE_TO)) { + regdata &= ~(SSB_IMSTATE_IBE | SSB_IMSTATE_TO); + ci->ops->write32(ci->ctx, CORE_SB(base, sbimstate), regdata); + } + + /* clear reset and allow it to propagate throughout the core */ + ci->ops->write32(ci->ctx, CORE_SB(base, sbtmstatelow), + SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK); + regdata = ci->ops->read32(ci->ctx, CORE_SB(base, sbtmstatelow)); + udelay(1); + + /* leave clock enabled */ + ci->ops->write32(ci->ctx, CORE_SB(base, sbtmstatelow), + SSB_TMSLOW_CLOCK); + regdata = ci->ops->read32(ci->ctx, CORE_SB(base, sbtmstatelow)); + udelay(1); +} + +static void brcmf_chip_ai_resetcore(struct brcmf_core_priv *core, u32 prereset, + u32 reset, u32 postreset) +{ + struct brcmf_chip_priv *ci; + int count; + + ci = core->chip; + + /* must disable first to work for arbitrary current core state */ + brcmf_chip_ai_coredisable(core, prereset, reset); + + count = 0; + while (ci->ops->read32(ci->ctx, core->wrapbase + BCMA_RESET_CTL) & + BCMA_RESET_CTL_RESET) { + ci->ops->write32(ci->ctx, core->wrapbase + BCMA_RESET_CTL, 0); + count++; + if (count > 50) + break; + usleep_range(40, 60); + } + + ci->ops->write32(ci->ctx, core->wrapbase + BCMA_IOCTL, + postreset | BCMA_IOCTL_CLK); + ci->ops->read32(ci->ctx, core->wrapbase + BCMA_IOCTL); +} + +static char *brcmf_chip_name(uint chipid, char *buf, uint len) +{ + const char *fmt; + + fmt = ((chipid > 0xa000) || (chipid < 0x4000)) ? "%d" : "%x"; + snprintf(buf, len, fmt, chipid); + return buf; +} + +static struct brcmf_core *brcmf_chip_add_core(struct brcmf_chip_priv *ci, + u16 coreid, u32 base, + u32 wrapbase) +{ + struct brcmf_core_priv *core; + + core = kzalloc(sizeof(*core), GFP_KERNEL); + if (!core) + return ERR_PTR(-ENOMEM); + + core->pub.id = coreid; + core->pub.base = base; + core->chip = ci; + core->wrapbase = wrapbase; + + list_add_tail(&core->list, &ci->cores); + return &core->pub; +} + +#ifdef DEBUG +/* safety check for chipinfo */ +static int brcmf_chip_cores_check(struct brcmf_chip_priv *ci) +{ + struct brcmf_core_priv *core; + bool need_socram = false; + bool has_socram = false; + int idx = 1; + + list_for_each_entry(core, &ci->cores, list) { + brcmf_dbg(INFO, " [%-2d] core 0x%x:%-2d base 0x%08x wrap 0x%08x\n", + idx++, core->pub.id, core->pub.rev, core->pub.base, + core->wrapbase); + + switch (core->pub.id) { + case BCMA_CORE_ARM_CM3: + need_socram = true; + break; + case BCMA_CORE_INTERNAL_MEM: + has_socram = true; + break; + case BCMA_CORE_ARM_CR4: + if (ci->pub.rambase == 0) { + brcmf_err("RAM base not provided with ARM CR4 core\n"); + return -ENOMEM; + } + break; + default: + break; + } + } + + /* check RAM core presence for ARM CM3 core */ + if (need_socram && !has_socram) { + brcmf_err("RAM core not provided with ARM CM3 core\n"); + return -ENODEV; + } + return 0; +} +#else /* DEBUG */ +static inline int brcmf_chip_cores_check(struct brcmf_chip_priv *ci) +{ + return 0; +} +#endif + +static void brcmf_chip_get_raminfo(struct brcmf_chip_priv *ci) +{ + switch (ci->pub.chip) { + case BCM4329_CHIP_ID: + ci->pub.ramsize = BCM4329_RAMSIZE; + break; + case BCM43143_CHIP_ID: + ci->pub.ramsize = BCM43143_RAMSIZE; + break; + case BCM43241_CHIP_ID: + ci->pub.ramsize = 0x90000; + break; + case BCM4330_CHIP_ID: + ci->pub.ramsize = 0x48000; + break; + case BCM4334_CHIP_ID: + ci->pub.ramsize = 0x80000; + break; + case BCM4335_CHIP_ID: + ci->pub.ramsize = 0xc0000; + ci->pub.rambase = 0x180000; + break; + case BCM43362_CHIP_ID: + ci->pub.ramsize = 0x3c000; + break; + case BCM4339_CHIP_ID: + case BCM4354_CHIP_ID: + ci->pub.ramsize = 0xc0000; + ci->pub.rambase = 0x180000; + break; + default: + brcmf_err("unknown chip: %s\n", ci->pub.name); + break; + } +} + +static u32 brcmf_chip_dmp_get_desc(struct brcmf_chip_priv *ci, u32 *eromaddr, + u8 *type) +{ + u32 val; + + /* read next descriptor */ + val = ci->ops->read32(ci->ctx, *eromaddr); + *eromaddr += 4; + + if (!type) + return val; + + /* determine descriptor type */ + *type = (val & DMP_DESC_TYPE_MSK); + if ((*type & ~DMP_DESC_ADDRSIZE_GT32) == DMP_DESC_ADDRESS) + *type = DMP_DESC_ADDRESS; + + return val; +} + +static int brcmf_chip_dmp_get_regaddr(struct brcmf_chip_priv *ci, u32 *eromaddr, + u32 *regbase, u32 *wrapbase) +{ + u8 desc; + u32 val; + u8 mpnum = 0; + u8 stype, sztype, wraptype; + + *regbase = 0; + *wrapbase = 0; + + val = brcmf_chip_dmp_get_desc(ci, eromaddr, &desc); + if (desc == DMP_DESC_MASTER_PORT) { + mpnum = (val & DMP_MASTER_PORT_NUM) >> DMP_MASTER_PORT_NUM_S; + wraptype = DMP_SLAVE_TYPE_MWRAP; + } else if (desc == DMP_DESC_ADDRESS) { + /* revert erom address */ + *eromaddr -= 4; + wraptype = DMP_SLAVE_TYPE_SWRAP; + } else { + *eromaddr -= 4; + return -EILSEQ; + } + + do { + /* locate address descriptor */ + do { + val = brcmf_chip_dmp_get_desc(ci, eromaddr, &desc); + /* unexpected table end */ + if (desc == DMP_DESC_EOT) { + *eromaddr -= 4; + return -EFAULT; + } + } while (desc != DMP_DESC_ADDRESS); + + /* skip upper 32-bit address descriptor */ + if (val & DMP_DESC_ADDRSIZE_GT32) + brcmf_chip_dmp_get_desc(ci, eromaddr, NULL); + + sztype = (val & DMP_SLAVE_SIZE_TYPE) >> DMP_SLAVE_SIZE_TYPE_S; + + /* next size descriptor can be skipped */ + if (sztype == DMP_SLAVE_SIZE_DESC) { + val = brcmf_chip_dmp_get_desc(ci, eromaddr, NULL); + /* skip upper size descriptor if present */ + if (val & DMP_DESC_ADDRSIZE_GT32) + brcmf_chip_dmp_get_desc(ci, eromaddr, NULL); + } + + /* only look for 4K register regions */ + if (sztype != DMP_SLAVE_SIZE_4K) + continue; + + stype = (val & DMP_SLAVE_TYPE) >> DMP_SLAVE_TYPE_S; + + /* only regular slave and wrapper */ + if (*regbase == 0 && stype == DMP_SLAVE_TYPE_SLAVE) + *regbase = val & DMP_SLAVE_ADDR_BASE; + if (*wrapbase == 0 && stype == wraptype) + *wrapbase = val & DMP_SLAVE_ADDR_BASE; + } while (*regbase == 0 || *wrapbase == 0); + + return 0; +} + +static +int brcmf_chip_dmp_erom_scan(struct brcmf_chip_priv *ci) +{ + struct brcmf_core *core; + u32 eromaddr; + u8 desc_type = 0; + u32 val; + u16 id; + u8 nmp, nsp, nmw, nsw, rev; + u32 base, wrap; + int err; + + eromaddr = ci->ops->read32(ci->ctx, CORE_CC_REG(SI_ENUM_BASE, eromptr)); + + while (desc_type != DMP_DESC_EOT) { + val = brcmf_chip_dmp_get_desc(ci, &eromaddr, &desc_type); + if (!(val & DMP_DESC_VALID)) + continue; + + if (desc_type == DMP_DESC_EMPTY) + continue; + + /* need a component descriptor */ + if (desc_type != DMP_DESC_COMPONENT) + continue; + + id = (val & DMP_COMP_PARTNUM) >> DMP_COMP_PARTNUM_S; + + /* next descriptor must be component as well */ + val = brcmf_chip_dmp_get_desc(ci, &eromaddr, &desc_type); + if (WARN_ON((val & DMP_DESC_TYPE_MSK) != DMP_DESC_COMPONENT)) + return -EFAULT; + + /* only look at cores with master port(s) */ + nmp = (val & DMP_COMP_NUM_MPORT) >> DMP_COMP_NUM_MPORT_S; + nsp = (val & DMP_COMP_NUM_SPORT) >> DMP_COMP_NUM_SPORT_S; + nmw = (val & DMP_COMP_NUM_MWRAP) >> DMP_COMP_NUM_MWRAP_S; + nsw = (val & DMP_COMP_NUM_SWRAP) >> DMP_COMP_NUM_SWRAP_S; + rev = (val & DMP_COMP_REVISION) >> DMP_COMP_REVISION_S; + + /* need core with ports */ + if (nmw + nsw == 0) + continue; + + /* try to obtain register address info */ + err = brcmf_chip_dmp_get_regaddr(ci, &eromaddr, &base, &wrap); + if (err) + continue; + + /* finally a core to be added */ + core = brcmf_chip_add_core(ci, id, base, wrap); + if (IS_ERR(core)) + return PTR_ERR(core); + + core->rev = rev; + } + + return 0; +} + +static int brcmf_chip_recognition(struct brcmf_chip_priv *ci) +{ + struct brcmf_core *core; + u32 regdata; + u32 socitype; + + /* Get CC core rev + * Chipid is assume to be at offset 0 from SI_ENUM_BASE + * For different chiptypes or old sdio hosts w/o chipcommon, + * other ways of recognition should be added here. + */ + regdata = ci->ops->read32(ci->ctx, CORE_CC_REG(SI_ENUM_BASE, chipid)); + ci->pub.chip = regdata & CID_ID_MASK; + ci->pub.chiprev = (regdata & CID_REV_MASK) >> CID_REV_SHIFT; + socitype = (regdata & CID_TYPE_MASK) >> CID_TYPE_SHIFT; + + brcmf_chip_name(ci->pub.chip, ci->pub.name, sizeof(ci->pub.name)); + brcmf_dbg(INFO, "found %s chip: BCM%s, rev=%d\n", + socitype == SOCI_SB ? "SB" : "AXI", ci->pub.name, + ci->pub.chiprev); + + if (socitype == SOCI_SB) { + if (ci->pub.chip != BCM4329_CHIP_ID) { + brcmf_err("SB chip is not supported\n"); + return -ENODEV; + } + ci->iscoreup = brcmf_chip_sb_iscoreup; + ci->coredisable = brcmf_chip_sb_coredisable; + ci->resetcore = brcmf_chip_sb_resetcore; + + core = brcmf_chip_add_core(ci, BCMA_CORE_CHIPCOMMON, + SI_ENUM_BASE, 0); + brcmf_chip_sb_corerev(ci, core); + core = brcmf_chip_add_core(ci, BCMA_CORE_SDIO_DEV, + BCM4329_CORE_BUS_BASE, 0); + brcmf_chip_sb_corerev(ci, core); + core = brcmf_chip_add_core(ci, BCMA_CORE_INTERNAL_MEM, + BCM4329_CORE_SOCRAM_BASE, 0); + brcmf_chip_sb_corerev(ci, core); + core = brcmf_chip_add_core(ci, BCMA_CORE_ARM_CM3, + BCM4329_CORE_ARM_BASE, 0); + brcmf_chip_sb_corerev(ci, core); + + core = brcmf_chip_add_core(ci, BCMA_CORE_80211, 0x18001000, 0); + brcmf_chip_sb_corerev(ci, core); + } else if (socitype == SOCI_AI) { + ci->iscoreup = brcmf_chip_ai_iscoreup; + ci->coredisable = brcmf_chip_ai_coredisable; + ci->resetcore = brcmf_chip_ai_resetcore; + + brcmf_chip_dmp_erom_scan(ci); + } else { + brcmf_err("chip backplane type %u is not supported\n", + socitype); + return -ENODEV; + } + + brcmf_chip_get_raminfo(ci); + + return brcmf_chip_cores_check(ci); +} + +static void brcmf_chip_disable_arm(struct brcmf_chip_priv *chip, u16 id) +{ + struct brcmf_core *core; + struct brcmf_core_priv *cr4; + u32 val; + + + core = brcmf_chip_get_core(&chip->pub, id); + if (!core) + return; + + switch (id) { + case BCMA_CORE_ARM_CM3: + brcmf_chip_coredisable(core, 0, 0); + break; + case BCMA_CORE_ARM_CR4: + cr4 = container_of(core, struct brcmf_core_priv, pub); + + /* clear all IOCTL bits except HALT bit */ + val = chip->ops->read32(chip->ctx, cr4->wrapbase + BCMA_IOCTL); + val &= ARMCR4_BCMA_IOCTL_CPUHALT; + brcmf_chip_resetcore(core, val, ARMCR4_BCMA_IOCTL_CPUHALT, + ARMCR4_BCMA_IOCTL_CPUHALT); + break; + default: + brcmf_err("unknown id: %u\n", id); + break; + } +} + +static int brcmf_chip_setup(struct brcmf_chip_priv *chip) +{ + struct brcmf_chip *pub; + struct brcmf_core_priv *cc; + u32 base; + u32 val; + int ret = 0; + + pub = &chip->pub; + cc = list_first_entry(&chip->cores, struct brcmf_core_priv, list); + base = cc->pub.base; + + /* get chipcommon capabilites */ + pub->cc_caps = chip->ops->read32(chip->ctx, + CORE_CC_REG(base, capabilities)); + + /* get pmu caps & rev */ + if (pub->cc_caps & CC_CAP_PMU) { + val = chip->ops->read32(chip->ctx, + CORE_CC_REG(base, pmucapabilities)); + pub->pmurev = val & PCAP_REV_MASK; + pub->pmucaps = val; + } + + brcmf_dbg(INFO, "ccrev=%d, pmurev=%d, pmucaps=0x%x\n", + cc->pub.rev, pub->pmurev, pub->pmucaps); + + /* execute bus core specific setup */ + if (chip->ops->setup) + ret = chip->ops->setup(chip->ctx, pub); + + /* + * Make sure any on-chip ARM is off (in case strapping is wrong), + * or downloaded code was already running. + */ + brcmf_chip_disable_arm(chip, BCMA_CORE_ARM_CM3); + brcmf_chip_disable_arm(chip, BCMA_CORE_ARM_CR4); + return ret; +} + +struct brcmf_chip *brcmf_chip_attach(void *ctx, + const struct brcmf_buscore_ops *ops) +{ + struct brcmf_chip_priv *chip; + int err = 0; + + if (WARN_ON(!ops->read32)) + err = -EINVAL; + if (WARN_ON(!ops->write32)) + err = -EINVAL; + if (WARN_ON(!ops->prepare)) + err = -EINVAL; + if (WARN_ON(!ops->exit_dl)) + err = -EINVAL; + if (err < 0) + return ERR_PTR(-EINVAL); + + chip = kzalloc(sizeof(*chip), GFP_KERNEL); + if (!chip) + return ERR_PTR(-ENOMEM); + + INIT_LIST_HEAD(&chip->cores); + chip->num_cores = 0; + chip->ops = ops; + chip->ctx = ctx; + + err = ops->prepare(ctx); + if (err < 0) + goto fail; + + err = brcmf_chip_recognition(chip); + if (err < 0) + goto fail; + + err = brcmf_chip_setup(chip); + if (err < 0) + goto fail; + + return &chip->pub; + +fail: + brcmf_chip_detach(&chip->pub); + return ERR_PTR(err); +} + +void brcmf_chip_detach(struct brcmf_chip *pub) +{ + struct brcmf_chip_priv *chip; + struct brcmf_core_priv *core; + struct brcmf_core_priv *tmp; + + chip = container_of(pub, struct brcmf_chip_priv, pub); + list_for_each_entry_safe(core, tmp, &chip->cores, list) { + list_del(&core->list); + kfree(core); + } + kfree(chip); +} + +struct brcmf_core *brcmf_chip_get_core(struct brcmf_chip *pub, u16 coreid) +{ + struct brcmf_chip_priv *chip; + struct brcmf_core_priv *core; + + chip = container_of(pub, struct brcmf_chip_priv, pub); + list_for_each_entry(core, &chip->cores, list) + if (core->pub.id == coreid) + return &core->pub; + + return NULL; +} + +struct brcmf_core *brcmf_chip_get_chipcommon(struct brcmf_chip *pub) +{ + struct brcmf_chip_priv *chip; + struct brcmf_core_priv *cc; + + chip = container_of(pub, struct brcmf_chip_priv, pub); + cc = list_first_entry(&chip->cores, struct brcmf_core_priv, list); + if (WARN_ON(!cc || cc->pub.id != BCMA_CORE_CHIPCOMMON)) + return brcmf_chip_get_core(pub, BCMA_CORE_CHIPCOMMON); + return &cc->pub; +} + +bool brcmf_chip_iscoreup(struct brcmf_core *pub) +{ + struct brcmf_core_priv *core; + + core = container_of(pub, struct brcmf_core_priv, pub); + return core->chip->iscoreup(core); +} + +void brcmf_chip_coredisable(struct brcmf_core *pub, u32 prereset, u32 reset) +{ + struct brcmf_core_priv *core; + + core = container_of(pub, struct brcmf_core_priv, pub); + core->chip->coredisable(core, prereset, reset); +} + +void brcmf_chip_resetcore(struct brcmf_core *pub, u32 prereset, u32 reset, + u32 postreset) +{ + struct brcmf_core_priv *core; + + core = container_of(pub, struct brcmf_core_priv, pub); + core->chip->resetcore(core, prereset, reset, postreset); +} + +static void +brcmf_chip_cm3_enterdl(struct brcmf_chip_priv *chip) +{ + struct brcmf_core *core; + + brcmf_chip_disable_arm(chip, BCMA_CORE_ARM_CM3); + core = brcmf_chip_get_core(&chip->pub, BCMA_CORE_80211); + brcmf_chip_resetcore(core, D11_BCMA_IOCTL_PHYRESET | + D11_BCMA_IOCTL_PHYCLOCKEN, + D11_BCMA_IOCTL_PHYCLOCKEN, + D11_BCMA_IOCTL_PHYCLOCKEN); + core = brcmf_chip_get_core(&chip->pub, BCMA_CORE_INTERNAL_MEM); + brcmf_chip_resetcore(core, 0, 0, 0); +} + +static bool brcmf_chip_cm3_exitdl(struct brcmf_chip_priv *chip) +{ + struct brcmf_core *core; + + core = brcmf_chip_get_core(&chip->pub, BCMA_CORE_INTERNAL_MEM); + if (!brcmf_chip_iscoreup(core)) { + brcmf_err("SOCRAM core is down after reset?\n"); + return false; + } + + chip->ops->exit_dl(chip->ctx, &chip->pub, 0); + + core = brcmf_chip_get_core(&chip->pub, BCMA_CORE_ARM_CM3); + brcmf_chip_resetcore(core, 0, 0, 0); + + return true; +} + +static inline void +brcmf_chip_cr4_enterdl(struct brcmf_chip_priv *chip) +{ + struct brcmf_core *core; + + brcmf_chip_disable_arm(chip, BCMA_CORE_ARM_CR4); + + core = brcmf_chip_get_core(&chip->pub, BCMA_CORE_80211); + brcmf_chip_resetcore(core, D11_BCMA_IOCTL_PHYRESET | + D11_BCMA_IOCTL_PHYCLOCKEN, + D11_BCMA_IOCTL_PHYCLOCKEN, + D11_BCMA_IOCTL_PHYCLOCKEN); +} + +static bool brcmf_chip_cr4_exitdl(struct brcmf_chip_priv *chip, u32 rstvec) +{ + struct brcmf_core *core; + + chip->ops->exit_dl(chip->ctx, &chip->pub, rstvec); + + /* restore ARM */ + core = brcmf_chip_get_core(&chip->pub, BCMA_CORE_ARM_CR4); + brcmf_chip_resetcore(core, ARMCR4_BCMA_IOCTL_CPUHALT, 0, 0); + + return true; +} + +void brcmf_chip_enter_download(struct brcmf_chip *pub) +{ + struct brcmf_chip_priv *chip; + struct brcmf_core *arm; + + brcmf_dbg(TRACE, "Enter\n"); + + chip = container_of(pub, struct brcmf_chip_priv, pub); + arm = brcmf_chip_get_core(pub, BCMA_CORE_ARM_CR4); + if (arm) { + brcmf_chip_cr4_enterdl(chip); + return; + } + + brcmf_chip_cm3_enterdl(chip); +} + +bool brcmf_chip_exit_download(struct brcmf_chip *pub, u32 rstvec) +{ + struct brcmf_chip_priv *chip; + struct brcmf_core *arm; + + brcmf_dbg(TRACE, "Enter\n"); + + chip = container_of(pub, struct brcmf_chip_priv, pub); + arm = brcmf_chip_get_core(pub, BCMA_CORE_ARM_CR4); + if (arm) + return brcmf_chip_cr4_exitdl(chip, rstvec); + + return brcmf_chip_cm3_exitdl(chip); +} + +bool brcmf_chip_sr_capable(struct brcmf_chip *pub) +{ + u32 base, addr, reg, pmu_cc3_mask = ~0; + struct brcmf_chip_priv *chip; + + brcmf_dbg(TRACE, "Enter\n"); + + /* old chips with PMU version less than 17 don't support save restore */ + if (pub->pmurev < 17) + return false; + + base = brcmf_chip_get_chipcommon(pub)->base; + chip = container_of(pub, struct brcmf_chip_priv, pub); + + switch (pub->chip) { + case BCM4354_CHIP_ID: + /* explicitly check SR engine enable bit */ + pmu_cc3_mask = BIT(2); + /* fall-through */ + case BCM43241_CHIP_ID: + case BCM4335_CHIP_ID: + case BCM4339_CHIP_ID: + /* read PMU chipcontrol register 3 */ + addr = CORE_CC_REG(base, chipcontrol_addr); + chip->ops->write32(chip->ctx, addr, 3); + addr = CORE_CC_REG(base, chipcontrol_data); + reg = chip->ops->read32(chip->ctx, addr); + return (reg & pmu_cc3_mask) != 0; + default: + addr = CORE_CC_REG(base, pmucapabilities_ext); + reg = chip->ops->read32(chip->ctx, addr); + if ((reg & PCAPEXT_SR_SUPPORTED_MASK) == 0) + return false; + + addr = CORE_CC_REG(base, retention_ctl); + reg = chip->ops->read32(chip->ctx, addr); + return (reg & (PMU_RCTL_MACPHY_DISABLE_MASK | + PMU_RCTL_LOGIC_DISABLE_MASK)) == 0; + } +} diff --git a/drivers/net/wireless/brcm80211/brcmfmac/chip.h b/drivers/net/wireless/brcm80211/brcmfmac/chip.h new file mode 100644 index 00000000000..c32908da90c --- /dev/null +++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.h @@ -0,0 +1,91 @@ +/* + * Copyright (c) 2014 Broadcom Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ +#ifndef BRCMF_CHIP_H +#define BRCMF_CHIP_H + +#include <linux/types.h> + +#define CORE_CC_REG(base, field) \ + (base + offsetof(struct chipcregs, field)) + +/** + * struct brcmf_chip - chip level information. + * + * @chip: chip identifier. + * @chiprev: chip revision. + * @cc_caps: chipcommon core capabilities. + * @pmucaps: PMU capabilities. + * @pmurev: PMU revision. + * @rambase: RAM base address (only applicable for ARM CR4 chips). + * @ramsize: amount of RAM on chip. + * @name: string representation of the chip identifier. + */ +struct brcmf_chip { + u32 chip; + u32 chiprev; + u32 cc_caps; + u32 pmucaps; + u32 pmurev; + u32 rambase; + u32 ramsize; + char name[8]; +}; + +/** + * struct brcmf_core - core related information. + * + * @id: core identifier. + * @rev: core revision. + * @base: base address of core register space. + */ +struct brcmf_core { + u16 id; + u16 rev; + u32 base; +}; + +/** + * struct brcmf_buscore_ops - buscore specific callbacks. + * + * @read32: read 32-bit value over bus. + * @write32: write 32-bit value over bus. + * @prepare: prepare bus for core configuration. + * @setup: bus-specific core setup. + * @exit_dl: exit download state. + * The callback should use the provided @rstvec when non-zero. + */ +struct brcmf_buscore_ops { + u32 (*read32)(void *ctx, u32 addr); + void (*write32)(void *ctx, u32 addr, u32 value); + int (*prepare)(void *ctx); + int (*setup)(void *ctx, struct brcmf_chip *chip); + void (*exit_dl)(void *ctx, struct brcmf_chip *chip, u32 rstvec); +}; + +struct brcmf_chip *brcmf_chip_attach(void *ctx, + const struct brcmf_buscore_ops *ops); +void brcmf_chip_detach(struct brcmf_chip *chip); +struct brcmf_core *brcmf_chip_get_core(struct brcmf_chip *chip, u16 coreid); +struct brcmf_core *brcmf_chip_get_chipcommon(struct brcmf_chip *chip); +bool brcmf_chip_iscoreup(struct brcmf_core *core); +void brcmf_chip_coredisable(struct brcmf_core *core, u32 prereset, u32 reset); +void brcmf_chip_resetcore(struct brcmf_core *core, u32 prereset, u32 reset, + u32 postreset); +void brcmf_chip_enter_download(struct brcmf_chip *ci); +bool brcmf_chip_exit_download(struct brcmf_chip *ci, u32 rstvec); +bool brcmf_chip_sr_capable(struct brcmf_chip *pub); + +#endif /* BRCMF_AXIDMP_H */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index d4d966beb84..7d28cd38509 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -1040,12 +1040,12 @@ void brcmf_detach(struct device *dev) brcmf_cfg80211_detach(drvr->config); + brcmf_fws_deinit(drvr); + brcmf_bus_detach(drvr); brcmf_proto_detach(drvr); - brcmf_fws_deinit(drvr); - brcmf_debugfs_detach(drvr); bus_if->drvr = NULL; kfree(drvr); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index ddaa9efd053..13c89a0c4ba 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -23,6 +23,7 @@ #include <linux/interrupt.h> #include <linux/sched.h> #include <linux/mmc/sdio.h> +#include <linux/mmc/sdio_ids.h> #include <linux/mmc/sdio_func.h> #include <linux/mmc/card.h> #include <linux/semaphore.h> @@ -40,7 +41,7 @@ #include <brcm_hw_ids.h> #include <soc.h> #include "sdio_host.h" -#include "sdio_chip.h" +#include "chip.h" #include "nvram.h" #define DCMD_RESP_TIMEOUT 2000 /* In milli second */ @@ -112,8 +113,6 @@ struct rte_console { #define BRCMF_TXBOUND 20 /* Default for max tx frames in one scheduling */ -#define BRCMF_DEFAULT_TXGLOM_SIZE 32 /* max tx frames in glom chain */ - #define BRCMF_TXMINMAX 1 /* Max tx frames if rx still pending */ #define MEMBLOCK 2048 /* Block size used for downloading @@ -156,6 +155,34 @@ struct rte_console { /* manfid tuple length, include tuple, link bytes */ #define SBSDIO_CIS_MANFID_TUPLE_LEN 6 +#define CORE_BUS_REG(base, field) \ + (base + offsetof(struct sdpcmd_regs, field)) + +/* SDIO function 1 register CHIPCLKCSR */ +/* Force ALP request to backplane */ +#define SBSDIO_FORCE_ALP 0x01 +/* Force HT request to backplane */ +#define SBSDIO_FORCE_HT 0x02 +/* Force ILP request to backplane */ +#define SBSDIO_FORCE_ILP 0x04 +/* Make ALP ready (power up xtal) */ +#define SBSDIO_ALP_AVAIL_REQ 0x08 +/* Make HT ready (power up PLL) */ +#define SBSDIO_HT_AVAIL_REQ 0x10 +/* Squelch clock requests from HW */ +#define SBSDIO_FORCE_HW_CLKREQ_OFF 0x20 +/* Status: ALP is ready */ +#define SBSDIO_ALP_AVAIL 0x40 +/* Status: HT is ready */ +#define SBSDIO_HT_AVAIL 0x80 +#define SBSDIO_CSR_MASK 0x1F +#define SBSDIO_AVBITS (SBSDIO_HT_AVAIL | SBSDIO_ALP_AVAIL) +#define SBSDIO_ALPAV(regval) ((regval) & SBSDIO_AVBITS) +#define SBSDIO_HTAV(regval) (((regval) & SBSDIO_AVBITS) == SBSDIO_AVBITS) +#define SBSDIO_ALPONLY(regval) (SBSDIO_ALPAV(regval) && !SBSDIO_HTAV(regval)) +#define SBSDIO_CLKAV(regval, alponly) \ + (SBSDIO_ALPAV(regval) && (alponly ? 1 : SBSDIO_HTAV(regval))) + /* intstatus */ #define I_SMB_SW0 (1 << 0) /* To SB Mail S/W interrupt 0 */ #define I_SMB_SW1 (1 << 1) /* To SB Mail S/W interrupt 1 */ @@ -276,7 +303,6 @@ struct rte_console { /* Flags for SDH calls */ #define F2SYNC (SDIO_REQ_4BYTE | SDIO_REQ_FIXED) -#define BRCMF_IDLE_IMMEDIATE (-1) /* Enter idle immediately */ #define BRCMF_IDLE_ACTIVE 0 /* Do not request any SD clock change * when idle */ @@ -433,10 +459,11 @@ struct brcmf_sdio { bool alp_only; /* Don't use HT clock (ALP only) */ u8 *ctrl_frame_buf; - u32 ctrl_frame_len; + u16 ctrl_frame_len; bool ctrl_frame_stat; - spinlock_t txqlock; + spinlock_t txq_lock; /* protect bus->txq */ + struct semaphore tx_seq_lock; /* protect bus->tx_seq */ wait_queue_head_t ctrl_wait; wait_queue_head_t dcmd_resp_wait; @@ -483,16 +510,58 @@ static const uint max_roundup = 512; #define ALIGNMENT 4 -static int brcmf_sdio_txglomsz = BRCMF_DEFAULT_TXGLOM_SIZE; -module_param_named(txglomsz, brcmf_sdio_txglomsz, int, 0); -MODULE_PARM_DESC(txglomsz, "maximum tx packet chain size [SDIO]"); - enum brcmf_sdio_frmtype { BRCMF_SDIO_FT_NORMAL, BRCMF_SDIO_FT_SUPER, BRCMF_SDIO_FT_SUB, }; +#define SDIOD_DRVSTR_KEY(chip, pmu) (((chip) << 16) | (pmu)) + +/* SDIO Pad drive strength to select value mappings */ +struct sdiod_drive_str { + u8 strength; /* Pad Drive Strength in mA */ + u8 sel; /* Chip-specific select value */ +}; + +/* SDIO Drive Strength to sel value table for PMU Rev 11 (1.8V) */ +static const struct sdiod_drive_str sdiod_drvstr_tab1_1v8[] = { + {32, 0x6}, + {26, 0x7}, + {22, 0x4}, + {16, 0x5}, + {12, 0x2}, + {8, 0x3}, + {4, 0x0}, + {0, 0x1} +}; + +/* SDIO Drive Strength to sel value table for PMU Rev 13 (1.8v) */ +static const struct sdiod_drive_str sdiod_drive_strength_tab5_1v8[] = { + {6, 0x7}, + {5, 0x6}, + {4, 0x5}, + {3, 0x4}, + {2, 0x2}, + {1, 0x1}, + {0, 0x0} +}; + +/* SDIO Drive Strength to sel value table for PMU Rev 17 (1.8v) */ +static const struct sdiod_drive_str sdiod_drvstr_tab6_1v8[] = { + {3, 0x3}, + {2, 0x2}, + {1, 0x1}, + {0, 0x0} }; + +/* SDIO Drive Strength to sel value table for 43143 PMU Rev 17 (3.3V) */ +static const struct sdiod_drive_str sdiod_drvstr_tab2_3v3[] = { + {16, 0x7}, + {12, 0x5}, + {8, 0x3}, + {4, 0x1} +}; + #define BCM43143_FIRMWARE_NAME "brcm/brcmfmac43143-sdio.bin" #define BCM43143_NVRAM_NAME "brcm/brcmfmac43143-sdio.txt" #define BCM43241B0_FIRMWARE_NAME "brcm/brcmfmac43241b0-sdio.bin" @@ -511,6 +580,8 @@ enum brcmf_sdio_frmtype { #define BCM43362_NVRAM_NAME "brcm/brcmfmac43362-sdio.txt" #define BCM4339_FIRMWARE_NAME "brcm/brcmfmac4339-sdio.bin" #define BCM4339_NVRAM_NAME "brcm/brcmfmac4339-sdio.txt" +#define BCM4354_FIRMWARE_NAME "brcm/brcmfmac4354-sdio.bin" +#define BCM4354_NVRAM_NAME "brcm/brcmfmac4354-sdio.txt" MODULE_FIRMWARE(BCM43143_FIRMWARE_NAME); MODULE_FIRMWARE(BCM43143_NVRAM_NAME); @@ -530,6 +601,8 @@ MODULE_FIRMWARE(BCM43362_FIRMWARE_NAME); MODULE_FIRMWARE(BCM43362_NVRAM_NAME); MODULE_FIRMWARE(BCM4339_FIRMWARE_NAME); MODULE_FIRMWARE(BCM4339_NVRAM_NAME); +MODULE_FIRMWARE(BCM4354_FIRMWARE_NAME); +MODULE_FIRMWARE(BCM4354_NVRAM_NAME); struct brcmf_firmware_names { u32 chipid; @@ -555,7 +628,8 @@ static const struct brcmf_firmware_names brcmf_fwname_data[] = { { BCM4334_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4334) }, { BCM4335_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4335) }, { BCM43362_CHIP_ID, 0xFFFFFFFE, BRCMF_FIRMWARE_NVRAM(BCM43362) }, - { BCM4339_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4339) } + { BCM4339_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4339) }, + { BCM4354_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4354) } }; @@ -618,27 +692,24 @@ static bool data_ok(struct brcmf_sdio *bus) * Reads a register in the SDIO hardware block. This block occupies a series of * adresses on the 32 bit backplane bus. */ -static int -r_sdreg32(struct brcmf_sdio *bus, u32 *regvar, u32 offset) +static int r_sdreg32(struct brcmf_sdio *bus, u32 *regvar, u32 offset) { - u8 idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV); + struct brcmf_core *core; int ret; - *regvar = brcmf_sdiod_regrl(bus->sdiodev, - bus->ci->c_inf[idx].base + offset, &ret); + core = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV); + *regvar = brcmf_sdiod_regrl(bus->sdiodev, core->base + offset, &ret); return ret; } -static int -w_sdreg32(struct brcmf_sdio *bus, u32 regval, u32 reg_offset) +static int w_sdreg32(struct brcmf_sdio *bus, u32 regval, u32 reg_offset) { - u8 idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV); + struct brcmf_core *core; int ret; - brcmf_sdiod_regwl(bus->sdiodev, - bus->ci->c_inf[idx].base + reg_offset, - regval, &ret); + core = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV); + brcmf_sdiod_regwl(bus->sdiodev, core->base + reg_offset, regval, &ret); return ret; } @@ -650,16 +721,12 @@ brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on) int err = 0; int try_cnt = 0; - brcmf_dbg(TRACE, "Enter\n"); + brcmf_dbg(TRACE, "Enter: on=%d\n", on); wr_val = (on << SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT); /* 1st KSO write goes to AOS wake up core if device is asleep */ brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, wr_val, &err); - if (err) { - brcmf_err("SDIO_AOS KSO write error: %d\n", err); - return err; - } if (on) { /* device WAKEUP through KSO: @@ -689,18 +756,22 @@ brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on) &err); if (((rd_val & bmask) == cmp_val) && !err) break; - brcmf_dbg(SDIO, "KSO wr/rd retry:%d (max: %d) ERR:%x\n", - try_cnt, MAX_KSO_ATTEMPTS, err); + udelay(KSO_WAIT_US); brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, wr_val, &err); } while (try_cnt++ < MAX_KSO_ATTEMPTS); + if (try_cnt > 2) + brcmf_dbg(SDIO, "try_cnt=%d rd_val=0x%x err=%d\n", try_cnt, + rd_val, err); + + if (try_cnt > MAX_KSO_ATTEMPTS) + brcmf_err("max tries: rd_val=0x%x err=%d\n", rd_val, err); + return err; } -#define PKT_AVAILABLE() (intstatus & I_HMB_FRAME_IND) - #define HOSTINTMASK (I_HMB_SW_MASK | I_CHIPACTIVE) /* Turn backplane clock on or off */ @@ -799,7 +870,6 @@ static int brcmf_sdio_htclk(struct brcmf_sdio *bus, bool on, bool pendok) } #endif /* defined (DEBUG) */ - bus->activity = true; } else { clkreq = 0; @@ -899,8 +969,9 @@ static int brcmf_sdio_bus_sleep(struct brcmf_sdio *bus, bool sleep, bool pendok) { int err = 0; - brcmf_dbg(TRACE, "Enter\n"); - brcmf_dbg(SDIO, "request %s currently %s\n", + u8 clkcsr; + + brcmf_dbg(SDIO, "Enter: request %s currently %s\n", (sleep ? "SLEEP" : "WAKE"), (bus->sleeping ? "SLEEP" : "WAKE")); @@ -917,8 +988,20 @@ brcmf_sdio_bus_sleep(struct brcmf_sdio *bus, bool sleep, bool pendok) atomic_read(&bus->ipend) > 0 || (!atomic_read(&bus->fcstate) && brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) && - data_ok(bus))) - return -EBUSY; + data_ok(bus))) { + err = -EBUSY; + goto done; + } + + clkcsr = brcmf_sdiod_regrb(bus->sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, + &err); + if ((clkcsr & SBSDIO_CSR_MASK) == 0) { + brcmf_dbg(SDIO, "no clock, set ALP\n"); + brcmf_sdiod_regwb(bus->sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, + SBSDIO_ALP_AVAIL_REQ, &err); + } err = brcmf_sdio_kso_control(bus, false); /* disable watchdog */ if (!err) @@ -935,7 +1018,7 @@ brcmf_sdio_bus_sleep(struct brcmf_sdio *bus, bool sleep, bool pendok) } else { brcmf_err("error while changing bus sleep state %d\n", err); - return err; + goto done; } } @@ -947,11 +1030,92 @@ end: } else { brcmf_sdio_clkctl(bus, CLK_AVAIL, pendok); } - +done: + brcmf_dbg(SDIO, "Exit: err=%d\n", err); return err; } +#ifdef DEBUG +static inline bool brcmf_sdio_valid_shared_address(u32 addr) +{ + return !(addr == 0 || ((~addr >> 16) & 0xffff) == (addr & 0xffff)); +} + +static int brcmf_sdio_readshared(struct brcmf_sdio *bus, + struct sdpcm_shared *sh) +{ + u32 addr; + int rv; + u32 shaddr = 0; + struct sdpcm_shared_le sh_le; + __le32 addr_le; + + shaddr = bus->ci->rambase + bus->ramsize - 4; + + /* + * Read last word in socram to determine + * address of sdpcm_shared structure + */ + sdio_claim_host(bus->sdiodev->func[1]); + brcmf_sdio_bus_sleep(bus, false, false); + rv = brcmf_sdiod_ramrw(bus->sdiodev, false, shaddr, (u8 *)&addr_le, 4); + sdio_release_host(bus->sdiodev->func[1]); + if (rv < 0) + return rv; + + addr = le32_to_cpu(addr_le); + + brcmf_dbg(SDIO, "sdpcm_shared address 0x%08X\n", addr); + + /* + * Check if addr is valid. + * NVRAM length at the end of memory should have been overwritten. + */ + if (!brcmf_sdio_valid_shared_address(addr)) { + brcmf_err("invalid sdpcm_shared address 0x%08X\n", + addr); + return -EINVAL; + } + + /* Read hndrte_shared structure */ + rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, (u8 *)&sh_le, + sizeof(struct sdpcm_shared_le)); + if (rv < 0) + return rv; + + /* Endianness */ + sh->flags = le32_to_cpu(sh_le.flags); + sh->trap_addr = le32_to_cpu(sh_le.trap_addr); + sh->assert_exp_addr = le32_to_cpu(sh_le.assert_exp_addr); + sh->assert_file_addr = le32_to_cpu(sh_le.assert_file_addr); + sh->assert_line = le32_to_cpu(sh_le.assert_line); + sh->console_addr = le32_to_cpu(sh_le.console_addr); + sh->msgtrace_addr = le32_to_cpu(sh_le.msgtrace_addr); + + if ((sh->flags & SDPCM_SHARED_VERSION_MASK) > SDPCM_SHARED_VERSION) { + brcmf_err("sdpcm shared version unsupported: dhd %d dongle %d\n", + SDPCM_SHARED_VERSION, + sh->flags & SDPCM_SHARED_VERSION_MASK); + return -EPROTO; + } + + return 0; +} + +static void brcmf_sdio_get_console_addr(struct brcmf_sdio *bus) +{ + struct sdpcm_shared sh; + + if (brcmf_sdio_readshared(bus, &sh) == 0) + bus->console_addr = sh.console_addr; +} +#else +static void brcmf_sdio_get_console_addr(struct brcmf_sdio *bus) +{ +} +#endif /* DEBUG */ + static u32 brcmf_sdio_hostmail(struct brcmf_sdio *bus) { u32 intstatus = 0; @@ -995,6 +1159,12 @@ static u32 brcmf_sdio_hostmail(struct brcmf_sdio *bus) else brcmf_dbg(SDIO, "Dongle ready, protocol version %d\n", bus->sdpcm_ver); + + /* + * Retrieve console state address now that firmware should have + * updated it. + */ + brcmf_sdio_get_console_addr(bus); } /* @@ -1083,6 +1253,28 @@ static void brcmf_sdio_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx) bus->cur_read.len = 0; } +static void brcmf_sdio_txfail(struct brcmf_sdio *bus) +{ + struct brcmf_sdio_dev *sdiodev = bus->sdiodev; + u8 i, hi, lo; + + /* On failure, abort the command and terminate the frame */ + brcmf_err("sdio error, abort command and terminate frame\n"); + bus->sdcnt.tx_sderrs++; + + brcmf_sdiod_abort(sdiodev, SDIO_FUNC_2); + brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_FRAMECTRL, SFC_WF_TERM, NULL); + bus->sdcnt.f1regdata++; + + for (i = 0; i < 3; i++) { + hi = brcmf_sdiod_regrb(sdiodev, SBSDIO_FUNC1_WFRAMEBCHI, NULL); + lo = brcmf_sdiod_regrb(sdiodev, SBSDIO_FUNC1_WFRAMEBCLO, NULL); + bus->sdcnt.f1regdata += 2; + if ((hi == 0) && (lo == 0)) + break; + } +} + /* return total length of buffer chain */ static uint brcmf_sdio_glom_len(struct brcmf_sdio *bus) { @@ -1955,7 +2147,7 @@ static int brcmf_sdio_txpkt_prep_sg(struct brcmf_sdio *bus, memcpy(pkt_pad->data, pkt->data + pkt->len - tail_chop, tail_chop); - *(u32 *)(pkt_pad->cb) = ALIGN_SKB_FLAG + tail_chop; + *(u16 *)(pkt_pad->cb) = ALIGN_SKB_FLAG + tail_chop; skb_trim(pkt, pkt->len - tail_chop); skb_trim(pkt_pad, tail_pad + tail_chop); __skb_queue_after(pktq, pkt, pkt_pad); @@ -2003,7 +2195,7 @@ brcmf_sdio_txpkt_prep(struct brcmf_sdio *bus, struct sk_buff_head *pktq, * already properly aligned and does not * need an sdpcm header. */ - if (*(u32 *)(pkt_next->cb) & ALIGN_SKB_FLAG) + if (*(u16 *)(pkt_next->cb) & ALIGN_SKB_FLAG) continue; /* align packet data pointer */ @@ -2037,10 +2229,10 @@ brcmf_sdio_txpkt_prep(struct brcmf_sdio *bus, struct sk_buff_head *pktq, if (BRCMF_BYTES_ON() && ((BRCMF_CTL_ON() && chan == SDPCM_CONTROL_CHANNEL) || (BRCMF_DATA_ON() && chan != SDPCM_CONTROL_CHANNEL))) - brcmf_dbg_hex_dump(true, pkt_next, hd_info.len, + brcmf_dbg_hex_dump(true, pkt_next->data, hd_info.len, "Tx Frame:\n"); else if (BRCMF_HDRS_ON()) - brcmf_dbg_hex_dump(true, pkt_next, + brcmf_dbg_hex_dump(true, pkt_next->data, head_pad + bus->tx_hdrlen, "Tx Header:\n"); } @@ -2067,11 +2259,11 @@ brcmf_sdio_txpkt_postp(struct brcmf_sdio *bus, struct sk_buff_head *pktq) u8 *hdr; u32 dat_offset; u16 tail_pad; - u32 dummy_flags, chop_len; + u16 dummy_flags, chop_len; struct sk_buff *pkt_next, *tmp, *pkt_prev; skb_queue_walk_safe(pktq, pkt_next, tmp) { - dummy_flags = *(u32 *)(pkt_next->cb); + dummy_flags = *(u16 *)(pkt_next->cb); if (dummy_flags & ALIGN_SKB_FLAG) { chop_len = dummy_flags & ALIGN_SKB_CHOP_LEN_MASK; if (chop_len) { @@ -2100,7 +2292,6 @@ static int brcmf_sdio_txpkt(struct brcmf_sdio *bus, struct sk_buff_head *pktq, uint chan) { int ret; - int i; struct sk_buff *pkt_next, *tmp; brcmf_dbg(TRACE, "Enter\n"); @@ -2113,28 +2304,9 @@ static int brcmf_sdio_txpkt(struct brcmf_sdio *bus, struct sk_buff_head *pktq, ret = brcmf_sdiod_send_pkt(bus->sdiodev, pktq); bus->sdcnt.f2txdata++; - if (ret < 0) { - /* On failure, abort the command and terminate the frame */ - brcmf_dbg(INFO, "sdio error %d, abort command and terminate frame\n", - ret); - bus->sdcnt.tx_sderrs++; + if (ret < 0) + brcmf_sdio_txfail(bus); - brcmf_sdiod_abort(bus->sdiodev, SDIO_FUNC_2); - brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, - SFC_WF_TERM, NULL); - bus->sdcnt.f1regdata++; - - for (i = 0; i < 3; i++) { - u8 hi, lo; - hi = brcmf_sdiod_regrb(bus->sdiodev, - SBSDIO_FUNC1_WFRAMEBCHI, NULL); - lo = brcmf_sdiod_regrb(bus->sdiodev, - SBSDIO_FUNC1_WFRAMEBCLO, NULL); - bus->sdcnt.f1regdata += 2; - if ((hi == 0) && (lo == 0)) - break; - } - } sdio_release_host(bus->sdiodev->func[1]); done: @@ -2164,13 +2336,15 @@ static uint brcmf_sdio_sendfromq(struct brcmf_sdio *bus, uint maxframes) /* Send frames until the limit or some other event */ for (cnt = 0; (cnt < maxframes) && data_ok(bus);) { pkt_num = 1; - __skb_queue_head_init(&pktq); + if (down_interruptible(&bus->tx_seq_lock)) + return cnt; if (bus->txglom) pkt_num = min_t(u8, bus->tx_max - bus->tx_seq, - brcmf_sdio_txglomsz); + bus->sdiodev->txglomsz); pkt_num = min_t(u32, pkt_num, brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol)); - spin_lock_bh(&bus->txqlock); + __skb_queue_head_init(&pktq); + spin_lock_bh(&bus->txq_lock); for (i = 0; i < pkt_num; i++) { pkt = brcmu_pktq_mdeq(&bus->txq, tx_prec_map, &prec_out); @@ -2178,15 +2352,19 @@ static uint brcmf_sdio_sendfromq(struct brcmf_sdio *bus, uint maxframes) break; __skb_queue_tail(&pktq, pkt); } - spin_unlock_bh(&bus->txqlock); - if (i == 0) + spin_unlock_bh(&bus->txq_lock); + if (i == 0) { + up(&bus->tx_seq_lock); break; + } ret = brcmf_sdio_txpkt(bus, &pktq, SDPCM_DATA_CHANNEL); + up(&bus->tx_seq_lock); + cnt += i; /* In poll mode, need to check for other events */ - if (!bus->intr && cnt) { + if (!bus->intr) { /* Check device status, signal pending interrupt */ sdio_claim_host(bus->sdiodev->func[1]); ret = r_sdreg32(bus, &intstatus, @@ -2211,6 +2389,68 @@ static uint brcmf_sdio_sendfromq(struct brcmf_sdio *bus, uint maxframes) return cnt; } +static int brcmf_sdio_tx_ctrlframe(struct brcmf_sdio *bus, u8 *frame, u16 len) +{ + u8 doff; + u16 pad; + uint retries = 0; + struct brcmf_sdio_hdrinfo hd_info = {0}; + int ret; + + brcmf_dbg(TRACE, "Enter\n"); + + /* Back the pointer to make room for bus header */ + frame -= bus->tx_hdrlen; + len += bus->tx_hdrlen; + + /* Add alignment padding (optional for ctl frames) */ + doff = ((unsigned long)frame % bus->head_align); + if (doff) { + frame -= doff; + len += doff; + memset(frame + bus->tx_hdrlen, 0, doff); + } + + /* Round send length to next SDIO block */ + pad = 0; + if (bus->roundup && bus->blocksize && (len > bus->blocksize)) { + pad = bus->blocksize - (len % bus->blocksize); + if ((pad > bus->roundup) || (pad >= bus->blocksize)) + pad = 0; + } else if (len % bus->head_align) { + pad = bus->head_align - (len % bus->head_align); + } + len += pad; + + hd_info.len = len - pad; + hd_info.channel = SDPCM_CONTROL_CHANNEL; + hd_info.dat_offset = doff + bus->tx_hdrlen; + hd_info.seq_num = bus->tx_seq; + hd_info.lastfrm = true; + hd_info.tail_pad = pad; + brcmf_sdio_hdpack(bus, frame, &hd_info); + + if (bus->txglom) + brcmf_sdio_update_hwhdr(frame, len); + + brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && BRCMF_CTL_ON(), + frame, len, "Tx Frame:\n"); + brcmf_dbg_hex_dump(!(BRCMF_BYTES_ON() && BRCMF_CTL_ON()) && + BRCMF_HDRS_ON(), + frame, min_t(u16, len, 16), "TxHdr:\n"); + + do { + ret = brcmf_sdiod_send_buf(bus->sdiodev, frame, len); + + if (ret < 0) + brcmf_sdio_txfail(bus); + else + bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQ_WRAP; + } while (ret < 0 && retries++ < TXRETRIES); + + return ret; +} + static void brcmf_sdio_bus_stop(struct device *dev) { u32 local_hostintmask; @@ -2292,21 +2532,29 @@ static inline void brcmf_sdio_clrintr(struct brcmf_sdio *bus) } } +static void atomic_orr(int val, atomic_t *v) +{ + int old_val; + + old_val = atomic_read(v); + while (atomic_cmpxchg(v, old_val, val | old_val) != old_val) + old_val = atomic_read(v); +} + static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus) { - u8 idx; + struct brcmf_core *buscore; u32 addr; unsigned long val; - int n, ret; + int ret; - idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV); - addr = bus->ci->c_inf[idx].base + - offsetof(struct sdpcmd_regs, intstatus); + buscore = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV); + addr = buscore->base + offsetof(struct sdpcmd_regs, intstatus); val = brcmf_sdiod_regrl(bus->sdiodev, addr, &ret); bus->sdcnt.f1regdata++; if (ret != 0) - val = 0; + return ret; val &= bus->hostintmask; atomic_set(&bus->fcstate, !!(val & I_HMB_FC_STATE)); @@ -2315,13 +2563,7 @@ static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus) if (val) { brcmf_sdiod_regwl(bus->sdiodev, addr, val, &ret); bus->sdcnt.f1regdata++; - } - - if (ret) { - atomic_set(&bus->intstatus, 0); - } else if (val) { - for_each_set_bit(n, &val, 32) - set_bit(n, (unsigned long *)&bus->intstatus.counter); + atomic_orr(val, &bus->intstatus); } return ret; @@ -2331,10 +2573,9 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus) { u32 newstatus = 0; unsigned long intstatus; - uint rxlimit = bus->rxbound; /* Rx frames to read before resched */ uint txlimit = bus->txbound; /* Tx frames to send before resched */ - uint framecnt = 0; /* Temporary counter of tx/rx frames */ - int err = 0, n; + uint framecnt; /* Temporary counter of tx/rx frames */ + int err = 0; brcmf_dbg(TRACE, "Enter\n"); @@ -2431,70 +2672,38 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus) intstatus &= ~I_HMB_FRAME_IND; /* On frame indication, read available frames */ - if (PKT_AVAILABLE() && bus->clkstate == CLK_AVAIL) { - framecnt = brcmf_sdio_readframes(bus, rxlimit); + if ((intstatus & I_HMB_FRAME_IND) && (bus->clkstate == CLK_AVAIL)) { + brcmf_sdio_readframes(bus, bus->rxbound); if (!bus->rxpending) intstatus &= ~I_HMB_FRAME_IND; - rxlimit -= min(framecnt, rxlimit); } /* Keep still-pending events for next scheduling */ - if (intstatus) { - for_each_set_bit(n, &intstatus, 32) - set_bit(n, (unsigned long *)&bus->intstatus.counter); - } + if (intstatus) + atomic_orr(intstatus, &bus->intstatus); brcmf_sdio_clrintr(bus); - if (data_ok(bus) && bus->ctrl_frame_stat && - (bus->clkstate == CLK_AVAIL)) { - int i; - - sdio_claim_host(bus->sdiodev->func[1]); - err = brcmf_sdiod_send_buf(bus->sdiodev, bus->ctrl_frame_buf, - (u32)bus->ctrl_frame_len); - - if (err < 0) { - /* On failure, abort the command and - terminate the frame */ - brcmf_dbg(INFO, "sdio error %d, abort command and terminate frame\n", - err); - bus->sdcnt.tx_sderrs++; - - brcmf_sdiod_abort(bus->sdiodev, SDIO_FUNC_2); - - brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, - SFC_WF_TERM, &err); - bus->sdcnt.f1regdata++; - - for (i = 0; i < 3; i++) { - u8 hi, lo; - hi = brcmf_sdiod_regrb(bus->sdiodev, - SBSDIO_FUNC1_WFRAMEBCHI, - &err); - lo = brcmf_sdiod_regrb(bus->sdiodev, - SBSDIO_FUNC1_WFRAMEBCLO, - &err); - bus->sdcnt.f1regdata += 2; - if ((hi == 0) && (lo == 0)) - break; - } + if (bus->ctrl_frame_stat && (bus->clkstate == CLK_AVAIL) && + (down_interruptible(&bus->tx_seq_lock) == 0)) { + if (data_ok(bus)) { + sdio_claim_host(bus->sdiodev->func[1]); + err = brcmf_sdio_tx_ctrlframe(bus, bus->ctrl_frame_buf, + bus->ctrl_frame_len); + sdio_release_host(bus->sdiodev->func[1]); - } else { - bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQ_WRAP; + bus->ctrl_frame_stat = false; + brcmf_sdio_wait_event_wakeup(bus); } - sdio_release_host(bus->sdiodev->func[1]); - bus->ctrl_frame_stat = false; - brcmf_sdio_wait_event_wakeup(bus); + up(&bus->tx_seq_lock); } /* Send queued frames (limit 1 if rx may still be pending) */ - else if ((bus->clkstate == CLK_AVAIL) && !atomic_read(&bus->fcstate) && - brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) && txlimit - && data_ok(bus)) { + if ((bus->clkstate == CLK_AVAIL) && !atomic_read(&bus->fcstate) && + brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) && txlimit && + data_ok(bus)) { framecnt = bus->rxpending ? min(txlimit, bus->txminmax) : txlimit; - framecnt = brcmf_sdio_sendfromq(bus, framecnt); - txlimit -= framecnt; + brcmf_sdio_sendfromq(bus, framecnt); } if (!brcmf_bus_ready(bus->sdiodev->bus_if) || (err != 0)) { @@ -2504,19 +2713,9 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus) atomic_read(&bus->ipend) > 0 || (!atomic_read(&bus->fcstate) && brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) && - data_ok(bus)) || PKT_AVAILABLE()) { + data_ok(bus))) { atomic_inc(&bus->dpc_tskcnt); } - - /* If we're done for now, turn off clock request. */ - if ((bus->clkstate != CLK_PENDING) - && bus->idletime == BRCMF_IDLE_IMMEDIATE) { - bus->activity = false; - brcmf_dbg(SDIO, "idle state\n"); - sdio_claim_host(bus->sdiodev->func[1]); - brcmf_sdio_bus_sleep(bus, true, false); - sdio_release_host(bus->sdiodev->func[1]); - } } static struct pktq *brcmf_sdio_bus_gettxq(struct device *dev) @@ -2531,15 +2730,12 @@ static struct pktq *brcmf_sdio_bus_gettxq(struct device *dev) static int brcmf_sdio_bus_txdata(struct device *dev, struct sk_buff *pkt) { int ret = -EBADE; - uint datalen, prec; + uint prec; struct brcmf_bus *bus_if = dev_get_drvdata(dev); struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; struct brcmf_sdio *bus = sdiodev->bus; - ulong flags; - brcmf_dbg(TRACE, "Enter\n"); - - datalen = pkt->len; + brcmf_dbg(TRACE, "Enter: pkt: data %p len %d\n", pkt->data, pkt->len); /* Add space for the header */ skb_push(pkt, bus->tx_hdrlen); @@ -2553,7 +2749,9 @@ static int brcmf_sdio_bus_txdata(struct device *dev, struct sk_buff *pkt) bus->sdcnt.fcqueued++; /* Priority based enq */ - spin_lock_irqsave(&bus->txqlock, flags); + spin_lock_bh(&bus->txq_lock); + /* reset bus_flags in packet cb */ + *(u16 *)(pkt->cb) = 0; if (!brcmf_c_prec_enq(bus->sdiodev->dev, &bus->txq, pkt, prec)) { skb_pull(pkt, bus->tx_hdrlen); brcmf_err("out of bus->txq !!!\n"); @@ -2566,7 +2764,7 @@ static int brcmf_sdio_bus_txdata(struct device *dev, struct sk_buff *pkt) bus->txoff = true; brcmf_txflowblock(bus->sdiodev->dev, true); } - spin_unlock_irqrestore(&bus->txqlock, flags); + spin_unlock_bh(&bus->txq_lock); #ifdef DEBUG if (pktq_plen(&bus->txq, prec) > qcount[prec]) @@ -2661,110 +2859,27 @@ break2: } #endif /* DEBUG */ -static int brcmf_sdio_tx_frame(struct brcmf_sdio *bus, u8 *frame, u16 len) -{ - int i; - int ret; - - bus->ctrl_frame_stat = false; - ret = brcmf_sdiod_send_buf(bus->sdiodev, frame, len); - - if (ret < 0) { - /* On failure, abort the command and terminate the frame */ - brcmf_dbg(INFO, "sdio error %d, abort command and terminate frame\n", - ret); - bus->sdcnt.tx_sderrs++; - - brcmf_sdiod_abort(bus->sdiodev, SDIO_FUNC_2); - - brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, - SFC_WF_TERM, NULL); - bus->sdcnt.f1regdata++; - - for (i = 0; i < 3; i++) { - u8 hi, lo; - hi = brcmf_sdiod_regrb(bus->sdiodev, - SBSDIO_FUNC1_WFRAMEBCHI, NULL); - lo = brcmf_sdiod_regrb(bus->sdiodev, - SBSDIO_FUNC1_WFRAMEBCLO, NULL); - bus->sdcnt.f1regdata += 2; - if (hi == 0 && lo == 0) - break; - } - return ret; - } - - bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQ_WRAP; - - return ret; -} - static int brcmf_sdio_bus_txctl(struct device *dev, unsigned char *msg, uint msglen) { - u8 *frame; - u16 len, pad; - uint retries = 0; - u8 doff = 0; - int ret = -1; struct brcmf_bus *bus_if = dev_get_drvdata(dev); struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; struct brcmf_sdio *bus = sdiodev->bus; - struct brcmf_sdio_hdrinfo hd_info = {0}; + int ret = -1; brcmf_dbg(TRACE, "Enter\n"); - /* Back the pointer to make a room for bus header */ - frame = msg - bus->tx_hdrlen; - len = (msglen += bus->tx_hdrlen); - - /* Add alignment padding (optional for ctl frames) */ - doff = ((unsigned long)frame % bus->head_align); - if (doff) { - frame -= doff; - len += doff; - msglen += doff; - memset(frame, 0, doff + bus->tx_hdrlen); - } - /* precondition: doff < bus->head_align */ - doff += bus->tx_hdrlen; - - /* Round send length to next SDIO block */ - pad = 0; - if (bus->roundup && bus->blocksize && (len > bus->blocksize)) { - pad = bus->blocksize - (len % bus->blocksize); - if ((pad > bus->roundup) || (pad >= bus->blocksize)) - pad = 0; - } else if (len % bus->head_align) { - pad = bus->head_align - (len % bus->head_align); - } - len += pad; - - /* precondition: IS_ALIGNED((unsigned long)frame, 2) */ - - /* Make sure backplane clock is on */ - sdio_claim_host(bus->sdiodev->func[1]); - brcmf_sdio_bus_sleep(bus, false, false); - sdio_release_host(bus->sdiodev->func[1]); - - hd_info.len = (u16)msglen; - hd_info.channel = SDPCM_CONTROL_CHANNEL; - hd_info.dat_offset = doff; - hd_info.seq_num = bus->tx_seq; - hd_info.lastfrm = true; - hd_info.tail_pad = pad; - brcmf_sdio_hdpack(bus, frame, &hd_info); - - if (bus->txglom) - brcmf_sdio_update_hwhdr(frame, len); + if (down_interruptible(&bus->tx_seq_lock)) + return -EINTR; if (!data_ok(bus)) { brcmf_dbg(INFO, "No bus credit bus->tx_max %d, bus->tx_seq %d\n", bus->tx_max, bus->tx_seq); - bus->ctrl_frame_stat = true; + up(&bus->tx_seq_lock); /* Send from dpc */ - bus->ctrl_frame_buf = frame; - bus->ctrl_frame_len = len; + bus->ctrl_frame_buf = msg; + bus->ctrl_frame_len = msglen; + bus->ctrl_frame_stat = true; wait_event_interruptible_timeout(bus->ctrl_wait, !bus->ctrl_frame_stat, @@ -2775,31 +2890,18 @@ brcmf_sdio_bus_txctl(struct device *dev, unsigned char *msg, uint msglen) ret = 0; } else { brcmf_dbg(SDIO, "ctrl_frame_stat == true\n"); + bus->ctrl_frame_stat = false; + if (down_interruptible(&bus->tx_seq_lock)) + return -EINTR; ret = -1; } } - if (ret == -1) { - brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && BRCMF_CTL_ON(), - frame, len, "Tx Frame:\n"); - brcmf_dbg_hex_dump(!(BRCMF_BYTES_ON() && BRCMF_CTL_ON()) && - BRCMF_HDRS_ON(), - frame, min_t(u16, len, 16), "TxHdr:\n"); - - do { - sdio_claim_host(bus->sdiodev->func[1]); - ret = brcmf_sdio_tx_frame(bus, frame, len); - sdio_release_host(bus->sdiodev->func[1]); - } while (ret < 0 && retries++ < TXRETRIES); - } - - if ((bus->idletime == BRCMF_IDLE_IMMEDIATE) && - atomic_read(&bus->dpc_tskcnt) == 0) { - bus->activity = false; sdio_claim_host(bus->sdiodev->func[1]); - brcmf_dbg(INFO, "idle\n"); - brcmf_sdio_clkctl(bus, CLK_NONE, true); + brcmf_sdio_bus_sleep(bus, false, false); + ret = brcmf_sdio_tx_ctrlframe(bus, msg, msglen); sdio_release_host(bus->sdiodev->func[1]); + up(&bus->tx_seq_lock); } if (ret) @@ -2811,72 +2913,6 @@ brcmf_sdio_bus_txctl(struct device *dev, unsigned char *msg, uint msglen) } #ifdef DEBUG -static inline bool brcmf_sdio_valid_shared_address(u32 addr) -{ - return !(addr == 0 || ((~addr >> 16) & 0xffff) == (addr & 0xffff)); -} - -static int brcmf_sdio_readshared(struct brcmf_sdio *bus, - struct sdpcm_shared *sh) -{ - u32 addr; - int rv; - u32 shaddr = 0; - struct sdpcm_shared_le sh_le; - __le32 addr_le; - - shaddr = bus->ci->rambase + bus->ramsize - 4; - - /* - * Read last word in socram to determine - * address of sdpcm_shared structure - */ - sdio_claim_host(bus->sdiodev->func[1]); - brcmf_sdio_bus_sleep(bus, false, false); - rv = brcmf_sdiod_ramrw(bus->sdiodev, false, shaddr, (u8 *)&addr_le, 4); - sdio_release_host(bus->sdiodev->func[1]); - if (rv < 0) - return rv; - - addr = le32_to_cpu(addr_le); - - brcmf_dbg(SDIO, "sdpcm_shared address 0x%08X\n", addr); - - /* - * Check if addr is valid. - * NVRAM length at the end of memory should have been overwritten. - */ - if (!brcmf_sdio_valid_shared_address(addr)) { - brcmf_err("invalid sdpcm_shared address 0x%08X\n", - addr); - return -EINVAL; - } - - /* Read hndrte_shared structure */ - rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, (u8 *)&sh_le, - sizeof(struct sdpcm_shared_le)); - if (rv < 0) - return rv; - - /* Endianness */ - sh->flags = le32_to_cpu(sh_le.flags); - sh->trap_addr = le32_to_cpu(sh_le.trap_addr); - sh->assert_exp_addr = le32_to_cpu(sh_le.assert_exp_addr); - sh->assert_file_addr = le32_to_cpu(sh_le.assert_file_addr); - sh->assert_line = le32_to_cpu(sh_le.assert_line); - sh->console_addr = le32_to_cpu(sh_le.console_addr); - sh->msgtrace_addr = le32_to_cpu(sh_le.msgtrace_addr); - - if ((sh->flags & SDPCM_SHARED_VERSION_MASK) > SDPCM_SHARED_VERSION) { - brcmf_err("sdpcm shared version unsupported: dhd %d dongle %d\n", - SDPCM_SHARED_VERSION, - sh->flags & SDPCM_SHARED_VERSION_MASK); - return -EPROTO; - } - - return 0; -} - static int brcmf_sdio_dump_console(struct brcmf_sdio *bus, struct sdpcm_shared *sh, char __user *data, size_t count) @@ -3106,6 +3142,8 @@ static void brcmf_sdio_debugfs_create(struct brcmf_sdio *bus) debugfs_create_file("forensics", S_IRUGO, dentry, bus, &brcmf_sdio_forensic_ops); brcmf_debugfs_create_sdio_count(drvr, &bus->sdcnt); + debugfs_create_u32("console_interval", 0644, dentry, + &bus->console_interval); } #else static int brcmf_sdio_checkdied(struct brcmf_sdio *bus) @@ -3224,32 +3262,17 @@ static int brcmf_sdio_download_code_file(struct brcmf_sdio *bus, const struct firmware *fw) { int err; - int offset; - int address; - int len; brcmf_dbg(TRACE, "Enter\n"); - err = 0; - offset = 0; - address = bus->ci->rambase; - while (offset < fw->size) { - len = ((offset + MEMBLOCK) < fw->size) ? MEMBLOCK : - fw->size - offset; - err = brcmf_sdiod_ramrw(bus->sdiodev, true, address, - (u8 *)&fw->data[offset], len); - if (err) { - brcmf_err("error %d on writing %d membytes at 0x%08x\n", - err, len, address); - return err; - } - offset += len; - address += len; - } - if (!err) - if (!brcmf_sdio_verifymemory(bus->sdiodev, bus->ci->rambase, - (u8 *)fw->data, fw->size)) - err = -EIO; + err = brcmf_sdiod_ramrw(bus->sdiodev, true, bus->ci->rambase, + (u8 *)fw->data, fw->size); + if (err) + brcmf_err("error %d on writing %d membytes at 0x%08x\n", + err, (int)fw->size, bus->ci->rambase); + else if (!brcmf_sdio_verifymemory(bus->sdiodev, bus->ci->rambase, + (u8 *)fw->data, fw->size)) + err = -EIO; return err; } @@ -3292,7 +3315,7 @@ static int brcmf_sdio_download_firmware(struct brcmf_sdio *bus) brcmf_sdio_clkctl(bus, CLK_AVAIL, false); /* Keep arm in reset */ - brcmf_sdio_chip_enter_download(bus->sdiodev, bus->ci); + brcmf_chip_enter_download(bus->ci); fw = brcmf_sdio_get_fw(bus, BRCMF_FIRMWARE_BIN); if (fw == NULL) { @@ -3324,7 +3347,7 @@ static int brcmf_sdio_download_firmware(struct brcmf_sdio *bus) } /* Take arm out of reset */ - if (!brcmf_sdio_chip_exit_download(bus->sdiodev, bus->ci, rstvec)) { + if (!brcmf_chip_exit_download(bus->ci, rstvec)) { brcmf_err("error getting out of ARM core reset\n"); goto err; } @@ -3339,40 +3362,6 @@ err: return bcmerror; } -static bool brcmf_sdio_sr_capable(struct brcmf_sdio *bus) -{ - u32 addr, reg, pmu_cc3_mask = ~0; - int err; - - brcmf_dbg(TRACE, "Enter\n"); - - /* old chips with PMU version less than 17 don't support save restore */ - if (bus->ci->pmurev < 17) - return false; - - switch (bus->ci->chip) { - case BCM43241_CHIP_ID: - case BCM4335_CHIP_ID: - case BCM4339_CHIP_ID: - /* read PMU chipcontrol register 3 */ - addr = CORE_CC_REG(bus->ci->c_inf[0].base, chipcontrol_addr); - brcmf_sdiod_regwl(bus->sdiodev, addr, 3, NULL); - addr = CORE_CC_REG(bus->ci->c_inf[0].base, chipcontrol_data); - reg = brcmf_sdiod_regrl(bus->sdiodev, addr, NULL); - return (reg & pmu_cc3_mask) != 0; - default: - addr = CORE_CC_REG(bus->ci->c_inf[0].base, pmucapabilities_ext); - reg = brcmf_sdiod_regrl(bus->sdiodev, addr, &err); - if ((reg & PCAPEXT_SR_SUPPORTED_MASK) == 0) - return false; - - addr = CORE_CC_REG(bus->ci->c_inf[0].base, retention_ctl); - reg = brcmf_sdiod_regrl(bus->sdiodev, addr, NULL); - return (reg & (PMU_RCTL_MACPHY_DISABLE_MASK | - PMU_RCTL_LOGIC_DISABLE_MASK)) == 0; - } -} - static void brcmf_sdio_sr_init(struct brcmf_sdio *bus) { int err = 0; @@ -3424,7 +3413,7 @@ static int brcmf_sdio_kso_init(struct brcmf_sdio *bus) brcmf_dbg(TRACE, "Enter\n"); /* KSO bit added in SDIO core rev 12 */ - if (bus->ci->c_inf[1].rev < 12) + if (brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV)->rev < 12) return 0; val = brcmf_sdiod_regrb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, &err); @@ -3455,15 +3444,13 @@ static int brcmf_sdio_bus_preinit(struct device *dev) struct brcmf_sdio *bus = sdiodev->bus; uint pad_size; u32 value; - u8 idx; int err; /* the commands below use the terms tx and rx from * a device perspective, ie. bus:txglom affects the * bus transfers from device to host. */ - idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV); - if (bus->ci->c_inf[idx].rev < 12) { + if (brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV)->rev < 12) { /* for sdio core rev < 12, disable txgloming */ value = 0; err = brcmf_iovar_data_set(dev, "bus:txglom", &value, @@ -3570,7 +3557,7 @@ static int brcmf_sdio_bus_init(struct device *dev) ret = -ENODEV; } - if (brcmf_sdio_sr_capable(bus)) { + if (brcmf_chip_sr_capable(bus->ci)) { brcmf_sdio_sr_init(bus); } else { /* Restore previous clock setting */ @@ -3714,11 +3701,175 @@ static void brcmf_sdio_dataworker(struct work_struct *work) datawork); while (atomic_read(&bus->dpc_tskcnt)) { + atomic_set(&bus->dpc_tskcnt, 0); brcmf_sdio_dpc(bus); - atomic_dec(&bus->dpc_tskcnt); } } +static void +brcmf_sdio_drivestrengthinit(struct brcmf_sdio_dev *sdiodev, + struct brcmf_chip *ci, u32 drivestrength) +{ + const struct sdiod_drive_str *str_tab = NULL; + u32 str_mask; + u32 str_shift; + u32 base; + u32 i; + u32 drivestrength_sel = 0; + u32 cc_data_temp; + u32 addr; + + if (!(ci->cc_caps & CC_CAP_PMU)) + return; + + switch (SDIOD_DRVSTR_KEY(ci->chip, ci->pmurev)) { + case SDIOD_DRVSTR_KEY(BCM4330_CHIP_ID, 12): + str_tab = sdiod_drvstr_tab1_1v8; + str_mask = 0x00003800; + str_shift = 11; + break; + case SDIOD_DRVSTR_KEY(BCM4334_CHIP_ID, 17): + str_tab = sdiod_drvstr_tab6_1v8; + str_mask = 0x00001800; + str_shift = 11; + break; + case SDIOD_DRVSTR_KEY(BCM43143_CHIP_ID, 17): + /* note: 43143 does not support tristate */ + i = ARRAY_SIZE(sdiod_drvstr_tab2_3v3) - 1; + if (drivestrength >= sdiod_drvstr_tab2_3v3[i].strength) { + str_tab = sdiod_drvstr_tab2_3v3; + str_mask = 0x00000007; + str_shift = 0; + } else + brcmf_err("Invalid SDIO Drive strength for chip %s, strength=%d\n", + ci->name, drivestrength); + break; + case SDIOD_DRVSTR_KEY(BCM43362_CHIP_ID, 13): + str_tab = sdiod_drive_strength_tab5_1v8; + str_mask = 0x00003800; + str_shift = 11; + break; + default: + brcmf_err("No SDIO Drive strength init done for chip %s rev %d pmurev %d\n", + ci->name, ci->chiprev, ci->pmurev); + break; + } + + if (str_tab != NULL) { + for (i = 0; str_tab[i].strength != 0; i++) { + if (drivestrength >= str_tab[i].strength) { + drivestrength_sel = str_tab[i].sel; + break; + } + } + base = brcmf_chip_get_chipcommon(ci)->base; + addr = CORE_CC_REG(base, chipcontrol_addr); + brcmf_sdiod_regwl(sdiodev, addr, 1, NULL); + cc_data_temp = brcmf_sdiod_regrl(sdiodev, addr, NULL); + cc_data_temp &= ~str_mask; + drivestrength_sel <<= str_shift; + cc_data_temp |= drivestrength_sel; + brcmf_sdiod_regwl(sdiodev, addr, cc_data_temp, NULL); + + brcmf_dbg(INFO, "SDIO: %d mA (req=%d mA) drive strength selected, set to 0x%08x\n", + str_tab[i].strength, drivestrength, cc_data_temp); + } +} + +static int brcmf_sdio_buscoreprep(void *ctx) +{ + struct brcmf_sdio_dev *sdiodev = ctx; + int err = 0; + u8 clkval, clkset; + + /* Try forcing SDIO core to do ALPAvail request only */ + clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_ALP_AVAIL_REQ; + brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err); + if (err) { + brcmf_err("error writing for HT off\n"); + return err; + } + + /* If register supported, wait for ALPAvail and then force ALP */ + /* This may take up to 15 milliseconds */ + clkval = brcmf_sdiod_regrb(sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, NULL); + + if ((clkval & ~SBSDIO_AVBITS) != clkset) { + brcmf_err("ChipClkCSR access: wrote 0x%02x read 0x%02x\n", + clkset, clkval); + return -EACCES; + } + + SPINWAIT(((clkval = brcmf_sdiod_regrb(sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, NULL)), + !SBSDIO_ALPAV(clkval)), + PMU_MAX_TRANSITION_DLY); + if (!SBSDIO_ALPAV(clkval)) { + brcmf_err("timeout on ALPAV wait, clkval 0x%02x\n", + clkval); + return -EBUSY; + } + + clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_FORCE_ALP; + brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err); + udelay(65); + + /* Also, disable the extra SDIO pull-ups */ + brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_SDIOPULLUP, 0, NULL); + + return 0; +} + +static void brcmf_sdio_buscore_exitdl(void *ctx, struct brcmf_chip *chip, + u32 rstvec) +{ + struct brcmf_sdio_dev *sdiodev = ctx; + struct brcmf_core *core; + u32 reg_addr; + + /* clear all interrupts */ + core = brcmf_chip_get_core(chip, BCMA_CORE_SDIO_DEV); + reg_addr = core->base + offsetof(struct sdpcmd_regs, intstatus); + brcmf_sdiod_regwl(sdiodev, reg_addr, 0xFFFFFFFF, NULL); + + if (rstvec) + /* Write reset vector to address 0 */ + brcmf_sdiod_ramrw(sdiodev, true, 0, (void *)&rstvec, + sizeof(rstvec)); +} + +static u32 brcmf_sdio_buscore_read32(void *ctx, u32 addr) +{ + struct brcmf_sdio_dev *sdiodev = ctx; + u32 val, rev; + + val = brcmf_sdiod_regrl(sdiodev, addr, NULL); + if (sdiodev->func[0]->device == SDIO_DEVICE_ID_BROADCOM_4335_4339 && + addr == CORE_CC_REG(SI_ENUM_BASE, chipid)) { + rev = (val & CID_REV_MASK) >> CID_REV_SHIFT; + if (rev >= 2) { + val &= ~CID_ID_MASK; + val |= BCM4339_CHIP_ID; + } + } + return val; +} + +static void brcmf_sdio_buscore_write32(void *ctx, u32 addr, u32 val) +{ + struct brcmf_sdio_dev *sdiodev = ctx; + + brcmf_sdiod_regwl(sdiodev, addr, val, NULL); +} + +static const struct brcmf_buscore_ops brcmf_sdio_buscore_ops = { + .prepare = brcmf_sdio_buscoreprep, + .exit_dl = brcmf_sdio_buscore_exitdl, + .read32 = brcmf_sdio_buscore_read32, + .write32 = brcmf_sdio_buscore_write32, +}; + static bool brcmf_sdio_probe_attach(struct brcmf_sdio *bus) { @@ -3734,7 +3885,7 @@ brcmf_sdio_probe_attach(struct brcmf_sdio *bus) brcmf_sdiod_regrl(bus->sdiodev, SI_ENUM_BASE, NULL)); /* - * Force PLL off until brcmf_sdio_chip_attach() + * Force PLL off until brcmf_chip_attach() * programs PLL control regs */ @@ -3755,8 +3906,10 @@ brcmf_sdio_probe_attach(struct brcmf_sdio *bus) */ brcmf_bus_change_state(bus->sdiodev->bus_if, BRCMF_BUS_DOWN); - if (brcmf_sdio_chip_attach(bus->sdiodev, &bus->ci)) { - brcmf_err("brcmf_sdio_chip_attach failed!\n"); + bus->ci = brcmf_chip_attach(bus->sdiodev, &brcmf_sdio_buscore_ops); + if (IS_ERR(bus->ci)) { + brcmf_err("brcmf_chip_attach failed!\n"); + bus->ci = NULL; goto fail; } @@ -3769,7 +3922,7 @@ brcmf_sdio_probe_attach(struct brcmf_sdio *bus) drivestrength = bus->sdiodev->pdata->drive_strength; else drivestrength = DEFAULT_SDIO_DRIVE_STRENGTH; - brcmf_sdio_chip_drivestrengthinit(bus->sdiodev, bus->ci, drivestrength); + brcmf_sdio_drivestrengthinit(bus->sdiodev, bus->ci, drivestrength); /* Get info on the SOCRAM cores... */ bus->ramsize = bus->ci->ramsize; @@ -3792,24 +3945,18 @@ brcmf_sdio_probe_attach(struct brcmf_sdio *bus) goto fail; /* set PMUControl so a backplane reset does PMU state reload */ - reg_addr = CORE_CC_REG(bus->ci->c_inf[0].base, + reg_addr = CORE_CC_REG(brcmf_chip_get_chipcommon(bus->ci)->base, pmucontrol); - reg_val = brcmf_sdiod_regrl(bus->sdiodev, - reg_addr, - &err); + reg_val = brcmf_sdiod_regrl(bus->sdiodev, reg_addr, &err); if (err) goto fail; reg_val |= (BCMA_CC_PMU_CTL_RES_RELOAD << BCMA_CC_PMU_CTL_RES_SHIFT); - brcmf_sdiod_regwl(bus->sdiodev, - reg_addr, - reg_val, - &err); + brcmf_sdiod_regwl(bus->sdiodev, reg_addr, reg_val, &err); if (err) goto fail; - sdio_release_host(bus->sdiodev->func[1]); brcmu_pktq_init(&bus->txq, (PRIOMASK + 1), TXQLEN); @@ -3849,6 +3996,7 @@ brcmf_sdio_watchdog_thread(void *data) brcmf_sdio_bus_watchdog(bus); /* Count the tick for reference */ bus->sdcnt.tickcnt++; + reinit_completion(&bus->watchdog_wait); } else break; } @@ -3925,7 +4073,8 @@ struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev) } spin_lock_init(&bus->rxctl_lock); - spin_lock_init(&bus->txqlock); + spin_lock_init(&bus->txq_lock); + sema_init(&bus->tx_seq_lock, 1); init_waitqueue_head(&bus->ctrl_wait); init_waitqueue_head(&bus->dcmd_resp_wait); @@ -4024,14 +4173,14 @@ void brcmf_sdio_remove(struct brcmf_sdio *bus) /* De-register interrupt handler */ brcmf_sdiod_intr_unregister(bus->sdiodev); - cancel_work_sync(&bus->datawork); - if (bus->brcmf_wq) - destroy_workqueue(bus->brcmf_wq); - if (bus->sdiodev->bus_if->drvr) { brcmf_detach(bus->sdiodev->dev); } + cancel_work_sync(&bus->datawork); + if (bus->brcmf_wq) + destroy_workqueue(bus->brcmf_wq); + if (bus->ci) { if (bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN) { sdio_claim_host(bus->sdiodev->func[1]); @@ -4042,12 +4191,11 @@ void brcmf_sdio_remove(struct brcmf_sdio *bus) * all necessary cores. */ msleep(20); - brcmf_sdio_chip_enter_download(bus->sdiodev, - bus->ci); + brcmf_chip_enter_download(bus->ci); brcmf_sdio_clkctl(bus, CLK_NONE, false); sdio_release_host(bus->sdiodev->func[1]); } - brcmf_sdio_chip_detach(&bus->ci); + brcmf_chip_detach(bus->ci); } kfree(bus->rxbuf); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwil.c b/drivers/net/wireless/brcm80211/brcmfmac/fwil.c index 22adbe311d2..59a5af5bf99 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fwil.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil.c @@ -124,7 +124,8 @@ brcmf_fil_cmd_int_get(struct brcmf_if *ifp, u32 cmd, u32 *data) } static u32 -brcmf_create_iovar(char *name, char *data, u32 datalen, char *buf, u32 buflen) +brcmf_create_iovar(char *name, const char *data, u32 datalen, + char *buf, u32 buflen) { u32 len; @@ -144,7 +145,7 @@ brcmf_create_iovar(char *name, char *data, u32 datalen, char *buf, u32 buflen) s32 -brcmf_fil_iovar_data_set(struct brcmf_if *ifp, char *name, void *data, +brcmf_fil_iovar_data_set(struct brcmf_if *ifp, char *name, const void *data, u32 len) { struct brcmf_pub *drvr = ifp->drvr; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwil.h b/drivers/net/wireless/brcm80211/brcmfmac/fwil.h index 77eae86e55c..a30be683f4a 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fwil.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil.h @@ -83,7 +83,7 @@ s32 brcmf_fil_cmd_data_get(struct brcmf_if *ifp, u32 cmd, void *data, u32 len); s32 brcmf_fil_cmd_int_set(struct brcmf_if *ifp, u32 cmd, u32 data); s32 brcmf_fil_cmd_int_get(struct brcmf_if *ifp, u32 cmd, u32 *data); -s32 brcmf_fil_iovar_data_set(struct brcmf_if *ifp, char *name, void *data, +s32 brcmf_fil_iovar_data_set(struct brcmf_if *ifp, char *name, const void *data, u32 len); s32 brcmf_fil_iovar_data_get(struct brcmf_if *ifp, char *name, void *data, u32 len); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h index af17a5bc8b8..614e4888504 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h @@ -48,6 +48,11 @@ #define BRCMF_MAXRATES_IN_SET 16 /* max # of rates in rateset */ +/* OBSS Coex Auto/On/Off */ +#define BRCMF_OBSS_COEX_AUTO (-1) +#define BRCMF_OBSS_COEX_OFF 0 +#define BRCMF_OBSS_COEX_ON 1 + enum brcmf_fil_p2p_if_types { BRCMF_FIL_P2P_IF_CLIENT, BRCMF_FIL_P2P_IF_GO, @@ -87,6 +92,11 @@ struct brcmf_fil_bss_enable_le { __le32 enable; }; +struct brcmf_fil_bwcap_le { + __le32 band; + __le32 bw_cap; +}; + /** * struct tdls_iovar - common structure for tdls iovars. * diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index fc4f98b275d..f3445ac627e 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -797,7 +797,8 @@ static s32 brcmf_p2p_run_escan(struct brcmf_cfg80211_info *cfg, /* SOCIAL CHANNELS 1, 6, 11 */ search_state = WL_P2P_DISC_ST_SEARCH; brcmf_dbg(INFO, "P2P SEARCH PHASE START\n"); - } else if (dev != NULL && vif->mode == WL_MODE_AP) { + } else if (dev != NULL && + vif->wdev.iftype == NL80211_IFTYPE_P2P_GO) { /* If you are already a GO, then do SEARCH only */ brcmf_dbg(INFO, "Already a GO. Do SEARCH Only\n"); search_state = WL_P2P_DISC_ST_SEARCH; @@ -2256,7 +2257,6 @@ struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name, struct brcmf_if *ifp = netdev_priv(cfg_to_ndev(cfg)); struct brcmf_cfg80211_vif *vif; enum brcmf_fil_p2p_if_types iftype; - enum wl_mode mode; int err; if (brcmf_cfg80211_vif_event_armed(cfg)) @@ -2267,11 +2267,9 @@ struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name, switch (type) { case NL80211_IFTYPE_P2P_CLIENT: iftype = BRCMF_FIL_P2P_IF_CLIENT; - mode = WL_MODE_BSS; break; case NL80211_IFTYPE_P2P_GO: iftype = BRCMF_FIL_P2P_IF_GO; - mode = WL_MODE_AP; break; case NL80211_IFTYPE_P2P_DEVICE: return brcmf_p2p_create_p2pdev(&cfg->p2p, wiphy, diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c deleted file mode 100644 index 82bf3c5d3cd..00000000000 --- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c +++ /dev/null @@ -1,972 +0,0 @@ -/* - * Copyright (c) 2011 Broadcom Corporation - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY - * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION - * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN - * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ -/* ***** SDIO interface chip backplane handle functions ***** */ - -#include <linux/types.h> -#include <linux/netdevice.h> -#include <linux/mmc/card.h> -#include <linux/mmc/sdio_func.h> -#include <linux/mmc/sdio_ids.h> -#include <linux/ssb/ssb_regs.h> -#include <linux/bcma/bcma.h> - -#include <chipcommon.h> -#include <brcm_hw_ids.h> -#include <brcmu_wifi.h> -#include <brcmu_utils.h> -#include <soc.h> -#include "dhd_dbg.h" -#include "sdio_host.h" -#include "sdio_chip.h" - -/* chip core base & ramsize */ -/* bcm4329 */ -/* SDIO device core, ID 0x829 */ -#define BCM4329_CORE_BUS_BASE 0x18011000 -/* internal memory core, ID 0x80e */ -#define BCM4329_CORE_SOCRAM_BASE 0x18003000 -/* ARM Cortex M3 core, ID 0x82a */ -#define BCM4329_CORE_ARM_BASE 0x18002000 -#define BCM4329_RAMSIZE 0x48000 - -/* bcm43143 */ -/* SDIO device core */ -#define BCM43143_CORE_BUS_BASE 0x18002000 -/* internal memory core */ -#define BCM43143_CORE_SOCRAM_BASE 0x18004000 -/* ARM Cortex M3 core, ID 0x82a */ -#define BCM43143_CORE_ARM_BASE 0x18003000 -#define BCM43143_RAMSIZE 0x70000 - -/* All D11 cores, ID 0x812 */ -#define BCM43xx_CORE_D11_BASE 0x18001000 - -#define SBCOREREV(sbidh) \ - ((((sbidh) & SSB_IDHIGH_RCHI) >> SSB_IDHIGH_RCHI_SHIFT) | \ - ((sbidh) & SSB_IDHIGH_RCLO)) - -/* SOC Interconnect types (aka chip types) */ -#define SOCI_SB 0 -#define SOCI_AI 1 - -/* EROM CompIdentB */ -#define CIB_REV_MASK 0xff000000 -#define CIB_REV_SHIFT 24 - -/* ARM CR4 core specific control flag bits */ -#define ARMCR4_BCMA_IOCTL_CPUHALT 0x0020 - -/* D11 core specific control flag bits */ -#define D11_BCMA_IOCTL_PHYCLOCKEN 0x0004 -#define D11_BCMA_IOCTL_PHYRESET 0x0008 - -#define SDIOD_DRVSTR_KEY(chip, pmu) (((chip) << 16) | (pmu)) -/* SDIO Pad drive strength to select value mappings */ -struct sdiod_drive_str { - u8 strength; /* Pad Drive Strength in mA */ - u8 sel; /* Chip-specific select value */ -}; -/* SDIO Drive Strength to sel value table for PMU Rev 11 (1.8V) */ -static const struct sdiod_drive_str sdiod_drvstr_tab1_1v8[] = { - {32, 0x6}, - {26, 0x7}, - {22, 0x4}, - {16, 0x5}, - {12, 0x2}, - {8, 0x3}, - {4, 0x0}, - {0, 0x1} -}; - -/* SDIO Drive Strength to sel value table for PMU Rev 13 (1.8v) */ -static const struct sdiod_drive_str sdiod_drive_strength_tab5_1v8[] = { - {6, 0x7}, - {5, 0x6}, - {4, 0x5}, - {3, 0x4}, - {2, 0x2}, - {1, 0x1}, - {0, 0x0} -}; - -/* SDIO Drive Strength to sel value table for PMU Rev 17 (1.8v) */ -static const struct sdiod_drive_str sdiod_drvstr_tab6_1v8[] = { - {3, 0x3}, - {2, 0x2}, - {1, 0x1}, - {0, 0x0} }; - -/* SDIO Drive Strength to sel value table for 43143 PMU Rev 17 (3.3V) */ -static const struct sdiod_drive_str sdiod_drvstr_tab2_3v3[] = { - {16, 0x7}, - {12, 0x5}, - {8, 0x3}, - {4, 0x1} -}; - -u8 -brcmf_sdio_chip_getinfidx(struct brcmf_chip *ci, u16 coreid) -{ - u8 idx; - - for (idx = 0; idx < BRCMF_MAX_CORENUM; idx++) - if (coreid == ci->c_inf[idx].id) - return idx; - - return BRCMF_MAX_CORENUM; -} - -static u32 -brcmf_sdio_sb_corerev(struct brcmf_sdio_dev *sdiodev, - struct brcmf_chip *ci, u16 coreid) -{ - u32 regdata; - u8 idx; - - idx = brcmf_sdio_chip_getinfidx(ci, coreid); - - regdata = brcmf_sdiod_regrl(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbidhigh), - NULL); - return SBCOREREV(regdata); -} - -static u32 -brcmf_sdio_ai_corerev(struct brcmf_sdio_dev *sdiodev, - struct brcmf_chip *ci, u16 coreid) -{ - u8 idx; - - idx = brcmf_sdio_chip_getinfidx(ci, coreid); - - return (ci->c_inf[idx].cib & CIB_REV_MASK) >> CIB_REV_SHIFT; -} - -static bool -brcmf_sdio_sb_iscoreup(struct brcmf_sdio_dev *sdiodev, - struct brcmf_chip *ci, u16 coreid) -{ - u32 regdata; - u8 idx; - - idx = brcmf_sdio_chip_getinfidx(ci, coreid); - if (idx == BRCMF_MAX_CORENUM) - return false; - - regdata = brcmf_sdiod_regrl(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatelow), - NULL); - regdata &= (SSB_TMSLOW_RESET | SSB_TMSLOW_REJECT | - SSB_IMSTATE_REJECT | SSB_TMSLOW_CLOCK); - return (SSB_TMSLOW_CLOCK == regdata); -} - -static bool -brcmf_sdio_ai_iscoreup(struct brcmf_sdio_dev *sdiodev, - struct brcmf_chip *ci, u16 coreid) -{ - u32 regdata; - u8 idx; - bool ret; - - idx = brcmf_sdio_chip_getinfidx(ci, coreid); - if (idx == BRCMF_MAX_CORENUM) - return false; - - regdata = brcmf_sdiod_regrl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, - NULL); - ret = (regdata & (BCMA_IOCTL_FGC | BCMA_IOCTL_CLK)) == BCMA_IOCTL_CLK; - - regdata = brcmf_sdiod_regrl(sdiodev, - ci->c_inf[idx].wrapbase+BCMA_RESET_CTL, - NULL); - ret = ret && ((regdata & BCMA_RESET_CTL_RESET) == 0); - - return ret; -} - -static void -brcmf_sdio_sb_coredisable(struct brcmf_sdio_dev *sdiodev, - struct brcmf_chip *ci, u16 coreid, u32 pre_resetbits, - u32 in_resetbits) -{ - u32 regdata, base; - u8 idx; - - idx = brcmf_sdio_chip_getinfidx(ci, coreid); - base = ci->c_inf[idx].base; - - regdata = brcmf_sdiod_regrl(sdiodev, CORE_SB(base, sbtmstatelow), NULL); - if (regdata & SSB_TMSLOW_RESET) - return; - - regdata = brcmf_sdiod_regrl(sdiodev, CORE_SB(base, sbtmstatelow), NULL); - if ((regdata & SSB_TMSLOW_CLOCK) != 0) { - /* - * set target reject and spin until busy is clear - * (preserve core-specific bits) - */ - regdata = brcmf_sdiod_regrl(sdiodev, - CORE_SB(base, sbtmstatelow), NULL); - brcmf_sdiod_regwl(sdiodev, CORE_SB(base, sbtmstatelow), - regdata | SSB_TMSLOW_REJECT, NULL); - - regdata = brcmf_sdiod_regrl(sdiodev, - CORE_SB(base, sbtmstatelow), NULL); - udelay(1); - SPINWAIT((brcmf_sdiod_regrl(sdiodev, - CORE_SB(base, sbtmstatehigh), - NULL) & - SSB_TMSHIGH_BUSY), 100000); - - regdata = brcmf_sdiod_regrl(sdiodev, - CORE_SB(base, sbtmstatehigh), - NULL); - if (regdata & SSB_TMSHIGH_BUSY) - brcmf_err("core state still busy\n"); - - regdata = brcmf_sdiod_regrl(sdiodev, CORE_SB(base, sbidlow), - NULL); - if (regdata & SSB_IDLOW_INITIATOR) { - regdata = brcmf_sdiod_regrl(sdiodev, - CORE_SB(base, sbimstate), - NULL); - regdata |= SSB_IMSTATE_REJECT; - brcmf_sdiod_regwl(sdiodev, CORE_SB(base, sbimstate), - regdata, NULL); - regdata = brcmf_sdiod_regrl(sdiodev, - CORE_SB(base, sbimstate), - NULL); - udelay(1); - SPINWAIT((brcmf_sdiod_regrl(sdiodev, - CORE_SB(base, sbimstate), - NULL) & - SSB_IMSTATE_BUSY), 100000); - } - - /* set reset and reject while enabling the clocks */ - regdata = SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK | - SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET; - brcmf_sdiod_regwl(sdiodev, CORE_SB(base, sbtmstatelow), - regdata, NULL); - regdata = brcmf_sdiod_regrl(sdiodev, - CORE_SB(base, sbtmstatelow), NULL); - udelay(10); - - /* clear the initiator reject bit */ - regdata = brcmf_sdiod_regrl(sdiodev, CORE_SB(base, sbidlow), - NULL); - if (regdata & SSB_IDLOW_INITIATOR) { - regdata = brcmf_sdiod_regrl(sdiodev, - CORE_SB(base, sbimstate), - NULL); - regdata &= ~SSB_IMSTATE_REJECT; - brcmf_sdiod_regwl(sdiodev, CORE_SB(base, sbimstate), - regdata, NULL); - } - } - - /* leave reset and reject asserted */ - brcmf_sdiod_regwl(sdiodev, CORE_SB(base, sbtmstatelow), - (SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET), NULL); - udelay(1); -} - -static void -brcmf_sdio_ai_coredisable(struct brcmf_sdio_dev *sdiodev, - struct brcmf_chip *ci, u16 coreid, u32 pre_resetbits, - u32 in_resetbits) -{ - u8 idx; - u32 regdata; - u32 wrapbase; - - idx = brcmf_sdio_chip_getinfidx(ci, coreid); - if (idx == BRCMF_MAX_CORENUM) - return; - - wrapbase = ci->c_inf[idx].wrapbase; - - /* if core is already in reset, just return */ - regdata = brcmf_sdiod_regrl(sdiodev, wrapbase + BCMA_RESET_CTL, NULL); - if ((regdata & BCMA_RESET_CTL_RESET) != 0) - return; - - /* configure reset */ - brcmf_sdiod_regwl(sdiodev, wrapbase + BCMA_IOCTL, pre_resetbits | - BCMA_IOCTL_FGC | BCMA_IOCTL_CLK, NULL); - regdata = brcmf_sdiod_regrl(sdiodev, wrapbase + BCMA_IOCTL, NULL); - - /* put in reset */ - brcmf_sdiod_regwl(sdiodev, wrapbase + BCMA_RESET_CTL, - BCMA_RESET_CTL_RESET, NULL); - usleep_range(10, 20); - - /* wait till reset is 1 */ - SPINWAIT(brcmf_sdiod_regrl(sdiodev, wrapbase + BCMA_RESET_CTL, NULL) != - BCMA_RESET_CTL_RESET, 300); - - /* post reset configure */ - brcmf_sdiod_regwl(sdiodev, wrapbase + BCMA_IOCTL, pre_resetbits | - BCMA_IOCTL_FGC | BCMA_IOCTL_CLK, NULL); - regdata = brcmf_sdiod_regrl(sdiodev, wrapbase + BCMA_IOCTL, NULL); -} - -static void -brcmf_sdio_sb_resetcore(struct brcmf_sdio_dev *sdiodev, - struct brcmf_chip *ci, u16 coreid, u32 pre_resetbits, - u32 in_resetbits, u32 post_resetbits) -{ - u32 regdata; - u8 idx; - - idx = brcmf_sdio_chip_getinfidx(ci, coreid); - if (idx == BRCMF_MAX_CORENUM) - return; - - /* - * Must do the disable sequence first to work for - * arbitrary current core state. - */ - brcmf_sdio_sb_coredisable(sdiodev, ci, coreid, pre_resetbits, - in_resetbits); - - /* - * Now do the initialization sequence. - * set reset while enabling the clock and - * forcing them on throughout the core - */ - brcmf_sdiod_regwl(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatelow), - SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK | SSB_TMSLOW_RESET, - NULL); - regdata = brcmf_sdiod_regrl(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatelow), - NULL); - udelay(1); - - /* clear any serror */ - regdata = brcmf_sdiod_regrl(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatehigh), - NULL); - if (regdata & SSB_TMSHIGH_SERR) - brcmf_sdiod_regwl(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatehigh), - 0, NULL); - - regdata = brcmf_sdiod_regrl(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbimstate), - NULL); - if (regdata & (SSB_IMSTATE_IBE | SSB_IMSTATE_TO)) - brcmf_sdiod_regwl(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbimstate), - regdata & ~(SSB_IMSTATE_IBE | SSB_IMSTATE_TO), - NULL); - - /* clear reset and allow it to propagate throughout the core */ - brcmf_sdiod_regwl(sdiodev, CORE_SB(ci->c_inf[idx].base, sbtmstatelow), - SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK, NULL); - regdata = brcmf_sdiod_regrl(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatelow), - NULL); - udelay(1); - - /* leave clock enabled */ - brcmf_sdiod_regwl(sdiodev, CORE_SB(ci->c_inf[idx].base, sbtmstatelow), - SSB_TMSLOW_CLOCK, NULL); - regdata = brcmf_sdiod_regrl(sdiodev, - CORE_SB(ci->c_inf[idx].base, sbtmstatelow), - NULL); - udelay(1); -} - -static void -brcmf_sdio_ai_resetcore(struct brcmf_sdio_dev *sdiodev, - struct brcmf_chip *ci, u16 coreid, u32 pre_resetbits, - u32 in_resetbits, u32 post_resetbits) -{ - u8 idx; - u32 regdata; - u32 wrapbase; - - idx = brcmf_sdio_chip_getinfidx(ci, coreid); - if (idx == BRCMF_MAX_CORENUM) - return; - - wrapbase = ci->c_inf[idx].wrapbase; - - /* must disable first to work for arbitrary current core state */ - brcmf_sdio_ai_coredisable(sdiodev, ci, coreid, pre_resetbits, - in_resetbits); - - while (brcmf_sdiod_regrl(sdiodev, wrapbase + BCMA_RESET_CTL, NULL) & - BCMA_RESET_CTL_RESET) { - brcmf_sdiod_regwl(sdiodev, wrapbase + BCMA_RESET_CTL, 0, NULL); - usleep_range(40, 60); - } - - brcmf_sdiod_regwl(sdiodev, wrapbase + BCMA_IOCTL, post_resetbits | - BCMA_IOCTL_CLK, NULL); - regdata = brcmf_sdiod_regrl(sdiodev, wrapbase + BCMA_IOCTL, NULL); -} - -#ifdef DEBUG -/* safety check for chipinfo */ -static int brcmf_sdio_chip_cichk(struct brcmf_chip *ci) -{ - u8 core_idx; - - /* check RAM core presence for ARM CM3 core */ - core_idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_ARM_CM3); - if (BRCMF_MAX_CORENUM != core_idx) { - core_idx = brcmf_sdio_chip_getinfidx(ci, - BCMA_CORE_INTERNAL_MEM); - if (BRCMF_MAX_CORENUM == core_idx) { - brcmf_err("RAM core not provided with ARM CM3 core\n"); - return -ENODEV; - } - } - - /* check RAM base for ARM CR4 core */ - core_idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_ARM_CR4); - if (BRCMF_MAX_CORENUM != core_idx) { - if (ci->rambase == 0) { - brcmf_err("RAM base not provided with ARM CR4 core\n"); - return -ENOMEM; - } - } - - return 0; -} -#else /* DEBUG */ -static inline int brcmf_sdio_chip_cichk(struct brcmf_chip *ci) -{ - return 0; -} -#endif - -static int brcmf_sdio_chip_recognition(struct brcmf_sdio_dev *sdiodev, - struct brcmf_chip *ci) -{ - u32 regdata; - u32 socitype; - - /* Get CC core rev - * Chipid is assume to be at offset 0 from SI_ENUM_BASE - * For different chiptypes or old sdio hosts w/o chipcommon, - * other ways of recognition should be added here. - */ - regdata = brcmf_sdiod_regrl(sdiodev, - CORE_CC_REG(SI_ENUM_BASE, chipid), - NULL); - ci->chip = regdata & CID_ID_MASK; - ci->chiprev = (regdata & CID_REV_MASK) >> CID_REV_SHIFT; - if (sdiodev->func[0]->device == SDIO_DEVICE_ID_BROADCOM_4335_4339 && - ci->chiprev >= 2) - ci->chip = BCM4339_CHIP_ID; - socitype = (regdata & CID_TYPE_MASK) >> CID_TYPE_SHIFT; - - brcmf_dbg(INFO, "found %s chip: id=0x%x, rev=%d\n", - socitype == SOCI_SB ? "SB" : "AXI", ci->chip, ci->chiprev); - - if (socitype == SOCI_SB) { - if (ci->chip != BCM4329_CHIP_ID) { - brcmf_err("SB chip is not supported\n"); - return -ENODEV; - } - ci->iscoreup = brcmf_sdio_sb_iscoreup; - ci->corerev = brcmf_sdio_sb_corerev; - ci->coredisable = brcmf_sdio_sb_coredisable; - ci->resetcore = brcmf_sdio_sb_resetcore; - - ci->c_inf[0].id = BCMA_CORE_CHIPCOMMON; - ci->c_inf[0].base = SI_ENUM_BASE; - ci->c_inf[1].id = BCMA_CORE_SDIO_DEV; - ci->c_inf[1].base = BCM4329_CORE_BUS_BASE; - ci->c_inf[2].id = BCMA_CORE_INTERNAL_MEM; - ci->c_inf[2].base = BCM4329_CORE_SOCRAM_BASE; - ci->c_inf[3].id = BCMA_CORE_ARM_CM3; - ci->c_inf[3].base = BCM4329_CORE_ARM_BASE; - ci->c_inf[4].id = BCMA_CORE_80211; - ci->c_inf[4].base = BCM43xx_CORE_D11_BASE; - ci->ramsize = BCM4329_RAMSIZE; - } else if (socitype == SOCI_AI) { - ci->iscoreup = brcmf_sdio_ai_iscoreup; - ci->corerev = brcmf_sdio_ai_corerev; - ci->coredisable = brcmf_sdio_ai_coredisable; - ci->resetcore = brcmf_sdio_ai_resetcore; - - ci->c_inf[0].id = BCMA_CORE_CHIPCOMMON; - ci->c_inf[0].base = SI_ENUM_BASE; - - /* Address of cores for new chips should be added here */ - switch (ci->chip) { - case BCM43143_CHIP_ID: - ci->c_inf[0].wrapbase = ci->c_inf[0].base + 0x00100000; - ci->c_inf[0].cib = 0x2b000000; - ci->c_inf[1].id = BCMA_CORE_SDIO_DEV; - ci->c_inf[1].base = BCM43143_CORE_BUS_BASE; - ci->c_inf[1].wrapbase = ci->c_inf[1].base + 0x00100000; - ci->c_inf[1].cib = 0x18000000; - ci->c_inf[2].id = BCMA_CORE_INTERNAL_MEM; - ci->c_inf[2].base = BCM43143_CORE_SOCRAM_BASE; - ci->c_inf[2].wrapbase = ci->c_inf[2].base + 0x00100000; - ci->c_inf[2].cib = 0x14000000; - ci->c_inf[3].id = BCMA_CORE_ARM_CM3; - ci->c_inf[3].base = BCM43143_CORE_ARM_BASE; - ci->c_inf[3].wrapbase = ci->c_inf[3].base + 0x00100000; - ci->c_inf[3].cib = 0x07000000; - ci->c_inf[4].id = BCMA_CORE_80211; - ci->c_inf[4].base = BCM43xx_CORE_D11_BASE; - ci->c_inf[4].wrapbase = ci->c_inf[4].base + 0x00100000; - ci->ramsize = BCM43143_RAMSIZE; - break; - case BCM43241_CHIP_ID: - ci->c_inf[0].wrapbase = 0x18100000; - ci->c_inf[0].cib = 0x2a084411; - ci->c_inf[1].id = BCMA_CORE_SDIO_DEV; - ci->c_inf[1].base = 0x18002000; - ci->c_inf[1].wrapbase = 0x18102000; - ci->c_inf[1].cib = 0x0e004211; - ci->c_inf[2].id = BCMA_CORE_INTERNAL_MEM; - ci->c_inf[2].base = 0x18004000; - ci->c_inf[2].wrapbase = 0x18104000; - ci->c_inf[2].cib = 0x14080401; - ci->c_inf[3].id = BCMA_CORE_ARM_CM3; - ci->c_inf[3].base = 0x18003000; - ci->c_inf[3].wrapbase = 0x18103000; - ci->c_inf[3].cib = 0x07004211; - ci->c_inf[4].id = BCMA_CORE_80211; - ci->c_inf[4].base = BCM43xx_CORE_D11_BASE; - ci->c_inf[4].wrapbase = ci->c_inf[4].base + 0x00100000; - ci->ramsize = 0x90000; - break; - case BCM4330_CHIP_ID: - ci->c_inf[0].wrapbase = 0x18100000; - ci->c_inf[0].cib = 0x27004211; - ci->c_inf[1].id = BCMA_CORE_SDIO_DEV; - ci->c_inf[1].base = 0x18002000; - ci->c_inf[1].wrapbase = 0x18102000; - ci->c_inf[1].cib = 0x07004211; - ci->c_inf[2].id = BCMA_CORE_INTERNAL_MEM; - ci->c_inf[2].base = 0x18004000; - ci->c_inf[2].wrapbase = 0x18104000; - ci->c_inf[2].cib = 0x0d080401; - ci->c_inf[3].id = BCMA_CORE_ARM_CM3; - ci->c_inf[3].base = 0x18003000; - ci->c_inf[3].wrapbase = 0x18103000; - ci->c_inf[3].cib = 0x03004211; - ci->c_inf[4].id = BCMA_CORE_80211; - ci->c_inf[4].base = BCM43xx_CORE_D11_BASE; - ci->c_inf[4].wrapbase = ci->c_inf[4].base + 0x00100000; - ci->ramsize = 0x48000; - break; - case BCM4334_CHIP_ID: - ci->c_inf[0].wrapbase = 0x18100000; - ci->c_inf[0].cib = 0x29004211; - ci->c_inf[1].id = BCMA_CORE_SDIO_DEV; - ci->c_inf[1].base = 0x18002000; - ci->c_inf[1].wrapbase = 0x18102000; - ci->c_inf[1].cib = 0x0d004211; - ci->c_inf[2].id = BCMA_CORE_INTERNAL_MEM; - ci->c_inf[2].base = 0x18004000; - ci->c_inf[2].wrapbase = 0x18104000; - ci->c_inf[2].cib = 0x13080401; - ci->c_inf[3].id = BCMA_CORE_ARM_CM3; - ci->c_inf[3].base = 0x18003000; - ci->c_inf[3].wrapbase = 0x18103000; - ci->c_inf[3].cib = 0x07004211; - ci->c_inf[4].id = BCMA_CORE_80211; - ci->c_inf[4].base = BCM43xx_CORE_D11_BASE; - ci->c_inf[4].wrapbase = ci->c_inf[4].base + 0x00100000; - ci->ramsize = 0x80000; - break; - case BCM4335_CHIP_ID: - ci->c_inf[0].wrapbase = 0x18100000; - ci->c_inf[0].cib = 0x2b084411; - ci->c_inf[1].id = BCMA_CORE_SDIO_DEV; - ci->c_inf[1].base = 0x18005000; - ci->c_inf[1].wrapbase = 0x18105000; - ci->c_inf[1].cib = 0x0f004211; - ci->c_inf[2].id = BCMA_CORE_ARM_CR4; - ci->c_inf[2].base = 0x18002000; - ci->c_inf[2].wrapbase = 0x18102000; - ci->c_inf[2].cib = 0x01084411; - ci->c_inf[3].id = BCMA_CORE_80211; - ci->c_inf[3].base = BCM43xx_CORE_D11_BASE; - ci->c_inf[3].wrapbase = ci->c_inf[3].base + 0x00100000; - ci->ramsize = 0xc0000; - ci->rambase = 0x180000; - break; - case BCM43362_CHIP_ID: - ci->c_inf[0].wrapbase = 0x18100000; - ci->c_inf[0].cib = 0x27004211; - ci->c_inf[1].id = BCMA_CORE_SDIO_DEV; - ci->c_inf[1].base = 0x18002000; - ci->c_inf[1].wrapbase = 0x18102000; - ci->c_inf[1].cib = 0x0a004211; - ci->c_inf[2].id = BCMA_CORE_INTERNAL_MEM; - ci->c_inf[2].base = 0x18004000; - ci->c_inf[2].wrapbase = 0x18104000; - ci->c_inf[2].cib = 0x08080401; - ci->c_inf[3].id = BCMA_CORE_ARM_CM3; - ci->c_inf[3].base = 0x18003000; - ci->c_inf[3].wrapbase = 0x18103000; - ci->c_inf[3].cib = 0x03004211; - ci->c_inf[4].id = BCMA_CORE_80211; - ci->c_inf[4].base = BCM43xx_CORE_D11_BASE; - ci->c_inf[4].wrapbase = ci->c_inf[4].base + 0x00100000; - ci->ramsize = 0x3C000; - break; - case BCM4339_CHIP_ID: - ci->c_inf[0].wrapbase = 0x18100000; - ci->c_inf[0].cib = 0x2e084411; - ci->c_inf[1].id = BCMA_CORE_SDIO_DEV; - ci->c_inf[1].base = 0x18005000; - ci->c_inf[1].wrapbase = 0x18105000; - ci->c_inf[1].cib = 0x15004211; - ci->c_inf[2].id = BCMA_CORE_ARM_CR4; - ci->c_inf[2].base = 0x18002000; - ci->c_inf[2].wrapbase = 0x18102000; - ci->c_inf[2].cib = 0x04084411; - ci->c_inf[3].id = BCMA_CORE_80211; - ci->c_inf[3].base = BCM43xx_CORE_D11_BASE; - ci->c_inf[3].wrapbase = ci->c_inf[3].base + 0x00100000; - ci->ramsize = 0xc0000; - ci->rambase = 0x180000; - break; - default: - brcmf_err("AXI chip is not supported\n"); - return -ENODEV; - } - } else { - brcmf_err("chip backplane type %u is not supported\n", - socitype); - return -ENODEV; - } - - return brcmf_sdio_chip_cichk(ci); -} - -static int -brcmf_sdio_chip_buscoreprep(struct brcmf_sdio_dev *sdiodev) -{ - int err = 0; - u8 clkval, clkset; - - /* Try forcing SDIO core to do ALPAvail request only */ - clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_ALP_AVAIL_REQ; - brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err); - if (err) { - brcmf_err("error writing for HT off\n"); - return err; - } - - /* If register supported, wait for ALPAvail and then force ALP */ - /* This may take up to 15 milliseconds */ - clkval = brcmf_sdiod_regrb(sdiodev, - SBSDIO_FUNC1_CHIPCLKCSR, NULL); - - if ((clkval & ~SBSDIO_AVBITS) != clkset) { - brcmf_err("ChipClkCSR access: wrote 0x%02x read 0x%02x\n", - clkset, clkval); - return -EACCES; - } - - SPINWAIT(((clkval = brcmf_sdiod_regrb(sdiodev, - SBSDIO_FUNC1_CHIPCLKCSR, NULL)), - !SBSDIO_ALPAV(clkval)), - PMU_MAX_TRANSITION_DLY); - if (!SBSDIO_ALPAV(clkval)) { - brcmf_err("timeout on ALPAV wait, clkval 0x%02x\n", - clkval); - return -EBUSY; - } - - clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_FORCE_ALP; - brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err); - udelay(65); - - /* Also, disable the extra SDIO pull-ups */ - brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_SDIOPULLUP, 0, NULL); - - return 0; -} - -static void -brcmf_sdio_chip_buscoresetup(struct brcmf_sdio_dev *sdiodev, - struct brcmf_chip *ci) -{ - u32 base = ci->c_inf[0].base; - - /* get chipcommon rev */ - ci->c_inf[0].rev = ci->corerev(sdiodev, ci, ci->c_inf[0].id); - - /* get chipcommon capabilites */ - ci->c_inf[0].caps = brcmf_sdiod_regrl(sdiodev, - CORE_CC_REG(base, capabilities), - NULL); - - /* get pmu caps & rev */ - if (ci->c_inf[0].caps & CC_CAP_PMU) { - ci->pmucaps = - brcmf_sdiod_regrl(sdiodev, - CORE_CC_REG(base, pmucapabilities), - NULL); - ci->pmurev = ci->pmucaps & PCAP_REV_MASK; - } - - ci->c_inf[1].rev = ci->corerev(sdiodev, ci, ci->c_inf[1].id); - - brcmf_dbg(INFO, "ccrev=%d, pmurev=%d, buscore rev/type=%d/0x%x\n", - ci->c_inf[0].rev, ci->pmurev, - ci->c_inf[1].rev, ci->c_inf[1].id); - - /* - * Make sure any on-chip ARM is off (in case strapping is wrong), - * or downloaded code was already running. - */ - ci->coredisable(sdiodev, ci, BCMA_CORE_ARM_CM3, 0, 0); -} - -int brcmf_sdio_chip_attach(struct brcmf_sdio_dev *sdiodev, - struct brcmf_chip **ci_ptr) -{ - int ret; - struct brcmf_chip *ci; - - brcmf_dbg(TRACE, "Enter\n"); - - ci = kzalloc(sizeof(*ci), GFP_ATOMIC); - if (!ci) - return -ENOMEM; - - ret = brcmf_sdio_chip_buscoreprep(sdiodev); - if (ret != 0) - goto err; - - ret = brcmf_sdio_chip_recognition(sdiodev, ci); - if (ret != 0) - goto err; - - brcmf_sdio_chip_buscoresetup(sdiodev, ci); - - brcmf_sdiod_regwl(sdiodev, CORE_CC_REG(ci->c_inf[0].base, gpiopullup), - 0, NULL); - brcmf_sdiod_regwl(sdiodev, CORE_CC_REG(ci->c_inf[0].base, gpiopulldown), - 0, NULL); - - *ci_ptr = ci; - return 0; - -err: - kfree(ci); - return ret; -} - -void -brcmf_sdio_chip_detach(struct brcmf_chip **ci_ptr) -{ - brcmf_dbg(TRACE, "Enter\n"); - - kfree(*ci_ptr); - *ci_ptr = NULL; -} - -static char *brcmf_sdio_chip_name(uint chipid, char *buf, uint len) -{ - const char *fmt; - - fmt = ((chipid > 0xa000) || (chipid < 0x4000)) ? "%d" : "%x"; - snprintf(buf, len, fmt, chipid); - return buf; -} - -void -brcmf_sdio_chip_drivestrengthinit(struct brcmf_sdio_dev *sdiodev, - struct brcmf_chip *ci, u32 drivestrength) -{ - const struct sdiod_drive_str *str_tab = NULL; - u32 str_mask; - u32 str_shift; - char chn[8]; - u32 base = ci->c_inf[0].base; - u32 i; - u32 drivestrength_sel = 0; - u32 cc_data_temp; - u32 addr; - - if (!(ci->c_inf[0].caps & CC_CAP_PMU)) - return; - - switch (SDIOD_DRVSTR_KEY(ci->chip, ci->pmurev)) { - case SDIOD_DRVSTR_KEY(BCM4330_CHIP_ID, 12): - str_tab = sdiod_drvstr_tab1_1v8; - str_mask = 0x00003800; - str_shift = 11; - break; - case SDIOD_DRVSTR_KEY(BCM4334_CHIP_ID, 17): - str_tab = sdiod_drvstr_tab6_1v8; - str_mask = 0x00001800; - str_shift = 11; - break; - case SDIOD_DRVSTR_KEY(BCM43143_CHIP_ID, 17): - /* note: 43143 does not support tristate */ - i = ARRAY_SIZE(sdiod_drvstr_tab2_3v3) - 1; - if (drivestrength >= sdiod_drvstr_tab2_3v3[i].strength) { - str_tab = sdiod_drvstr_tab2_3v3; - str_mask = 0x00000007; - str_shift = 0; - } else - brcmf_err("Invalid SDIO Drive strength for chip %s, strength=%d\n", - brcmf_sdio_chip_name(ci->chip, chn, 8), - drivestrength); - break; - case SDIOD_DRVSTR_KEY(BCM43362_CHIP_ID, 13): - str_tab = sdiod_drive_strength_tab5_1v8; - str_mask = 0x00003800; - str_shift = 11; - break; - default: - brcmf_err("No SDIO Drive strength init done for chip %s rev %d pmurev %d\n", - brcmf_sdio_chip_name(ci->chip, chn, 8), - ci->chiprev, ci->pmurev); - break; - } - - if (str_tab != NULL) { - for (i = 0; str_tab[i].strength != 0; i++) { - if (drivestrength >= str_tab[i].strength) { - drivestrength_sel = str_tab[i].sel; - break; - } - } - addr = CORE_CC_REG(base, chipcontrol_addr); - brcmf_sdiod_regwl(sdiodev, addr, 1, NULL); - cc_data_temp = brcmf_sdiod_regrl(sdiodev, addr, NULL); - cc_data_temp &= ~str_mask; - drivestrength_sel <<= str_shift; - cc_data_temp |= drivestrength_sel; - brcmf_sdiod_regwl(sdiodev, addr, cc_data_temp, NULL); - - brcmf_dbg(INFO, "SDIO: %d mA (req=%d mA) drive strength selected, set to 0x%08x\n", - str_tab[i].strength, drivestrength, cc_data_temp); - } -} - -static void -brcmf_sdio_chip_cm3_enterdl(struct brcmf_sdio_dev *sdiodev, - struct brcmf_chip *ci) -{ - ci->coredisable(sdiodev, ci, BCMA_CORE_ARM_CM3, 0, 0); - ci->resetcore(sdiodev, ci, BCMA_CORE_80211, - D11_BCMA_IOCTL_PHYRESET | D11_BCMA_IOCTL_PHYCLOCKEN, - D11_BCMA_IOCTL_PHYCLOCKEN, D11_BCMA_IOCTL_PHYCLOCKEN); - ci->resetcore(sdiodev, ci, BCMA_CORE_INTERNAL_MEM, 0, 0, 0); -} - -static bool brcmf_sdio_chip_cm3_exitdl(struct brcmf_sdio_dev *sdiodev, - struct brcmf_chip *ci) -{ - u8 core_idx; - u32 reg_addr; - - if (!ci->iscoreup(sdiodev, ci, BCMA_CORE_INTERNAL_MEM)) { - brcmf_err("SOCRAM core is down after reset?\n"); - return false; - } - - /* clear all interrupts */ - core_idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_SDIO_DEV); - reg_addr = ci->c_inf[core_idx].base; - reg_addr += offsetof(struct sdpcmd_regs, intstatus); - brcmf_sdiod_regwl(sdiodev, reg_addr, 0xFFFFFFFF, NULL); - - ci->resetcore(sdiodev, ci, BCMA_CORE_ARM_CM3, 0, 0, 0); - - return true; -} - -static inline void -brcmf_sdio_chip_cr4_enterdl(struct brcmf_sdio_dev *sdiodev, - struct brcmf_chip *ci) -{ - u8 idx; - u32 regdata; - u32 wrapbase; - idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_ARM_CR4); - - if (idx == BRCMF_MAX_CORENUM) - return; - - wrapbase = ci->c_inf[idx].wrapbase; - regdata = brcmf_sdiod_regrl(sdiodev, wrapbase + BCMA_IOCTL, NULL); - regdata &= ARMCR4_BCMA_IOCTL_CPUHALT; - ci->resetcore(sdiodev, ci, BCMA_CORE_ARM_CR4, regdata, - ARMCR4_BCMA_IOCTL_CPUHALT, ARMCR4_BCMA_IOCTL_CPUHALT); - ci->resetcore(sdiodev, ci, BCMA_CORE_80211, - D11_BCMA_IOCTL_PHYRESET | D11_BCMA_IOCTL_PHYCLOCKEN, - D11_BCMA_IOCTL_PHYCLOCKEN, D11_BCMA_IOCTL_PHYCLOCKEN); -} - -static bool brcmf_sdio_chip_cr4_exitdl(struct brcmf_sdio_dev *sdiodev, - struct brcmf_chip *ci, u32 rstvec) -{ - u8 core_idx; - u32 reg_addr; - - /* clear all interrupts */ - core_idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_SDIO_DEV); - reg_addr = ci->c_inf[core_idx].base; - reg_addr += offsetof(struct sdpcmd_regs, intstatus); - brcmf_sdiod_regwl(sdiodev, reg_addr, 0xFFFFFFFF, NULL); - - /* Write reset vector to address 0 */ - brcmf_sdiod_ramrw(sdiodev, true, 0, (void *)&rstvec, - sizeof(rstvec)); - - /* restore ARM */ - ci->resetcore(sdiodev, ci, BCMA_CORE_ARM_CR4, ARMCR4_BCMA_IOCTL_CPUHALT, - 0, 0); - - return true; -} - -void brcmf_sdio_chip_enter_download(struct brcmf_sdio_dev *sdiodev, - struct brcmf_chip *ci) -{ - u8 arm_core_idx; - - arm_core_idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_ARM_CM3); - if (BRCMF_MAX_CORENUM != arm_core_idx) { - brcmf_sdio_chip_cm3_enterdl(sdiodev, ci); - return; - } - - brcmf_sdio_chip_cr4_enterdl(sdiodev, ci); -} - -bool brcmf_sdio_chip_exit_download(struct brcmf_sdio_dev *sdiodev, - struct brcmf_chip *ci, u32 rstvec) -{ - u8 arm_core_idx; - - arm_core_idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_ARM_CM3); - if (BRCMF_MAX_CORENUM != arm_core_idx) - return brcmf_sdio_chip_cm3_exitdl(sdiodev, ci); - - return brcmf_sdio_chip_cr4_exitdl(sdiodev, ci, rstvec); -} diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h deleted file mode 100644 index fb0614329ed..00000000000 --- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h +++ /dev/null @@ -1,231 +0,0 @@ -/* - * Copyright (c) 2011 Broadcom Corporation - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY - * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION - * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN - * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef _BRCMFMAC_SDIO_CHIP_H_ -#define _BRCMFMAC_SDIO_CHIP_H_ - -/* - * Core reg address translation. - * Both macro's returns a 32 bits byte address on the backplane bus. - */ -#define CORE_CC_REG(base, field) \ - (base + offsetof(struct chipcregs, field)) -#define CORE_BUS_REG(base, field) \ - (base + offsetof(struct sdpcmd_regs, field)) -#define CORE_SB(base, field) \ - (base + SBCONFIGOFF + offsetof(struct sbconfig, field)) - -/* SDIO function 1 register CHIPCLKCSR */ -/* Force ALP request to backplane */ -#define SBSDIO_FORCE_ALP 0x01 -/* Force HT request to backplane */ -#define SBSDIO_FORCE_HT 0x02 -/* Force ILP request to backplane */ -#define SBSDIO_FORCE_ILP 0x04 -/* Make ALP ready (power up xtal) */ -#define SBSDIO_ALP_AVAIL_REQ 0x08 -/* Make HT ready (power up PLL) */ -#define SBSDIO_HT_AVAIL_REQ 0x10 -/* Squelch clock requests from HW */ -#define SBSDIO_FORCE_HW_CLKREQ_OFF 0x20 -/* Status: ALP is ready */ -#define SBSDIO_ALP_AVAIL 0x40 -/* Status: HT is ready */ -#define SBSDIO_HT_AVAIL 0x80 -#define SBSDIO_AVBITS (SBSDIO_HT_AVAIL | SBSDIO_ALP_AVAIL) -#define SBSDIO_ALPAV(regval) ((regval) & SBSDIO_AVBITS) -#define SBSDIO_HTAV(regval) (((regval) & SBSDIO_AVBITS) == SBSDIO_AVBITS) -#define SBSDIO_ALPONLY(regval) (SBSDIO_ALPAV(regval) && !SBSDIO_HTAV(regval)) -#define SBSDIO_CLKAV(regval, alponly) \ - (SBSDIO_ALPAV(regval) && (alponly ? 1 : SBSDIO_HTAV(regval))) - -#define BRCMF_MAX_CORENUM 6 - -struct brcmf_core { - u16 id; - u16 rev; - u32 base; - u32 wrapbase; - u32 caps; - u32 cib; -}; - -struct brcmf_chip { - u32 chip; - u32 chiprev; - /* core info */ - /* always put chipcommon core at 0, bus core at 1 */ - struct brcmf_core c_inf[BRCMF_MAX_CORENUM]; - u32 pmurev; - u32 pmucaps; - u32 ramsize; - u32 rambase; - u32 rst_vec; /* reset vertor for ARM CR4 core */ - - bool (*iscoreup)(struct brcmf_sdio_dev *sdiodev, struct brcmf_chip *ci, - u16 coreid); - u32 (*corerev)(struct brcmf_sdio_dev *sdiodev, struct brcmf_chip *ci, - u16 coreid); - void (*coredisable)(struct brcmf_sdio_dev *sdiodev, - struct brcmf_chip *ci, u16 coreid, u32 pre_resetbits, - u32 in_resetbits); - void (*resetcore)(struct brcmf_sdio_dev *sdiodev, - struct brcmf_chip *ci, u16 coreid, u32 pre_resetbits, - u32 in_resetbits, u32 post_resetbits); -}; - -struct sbconfig { - u32 PAD[2]; - u32 sbipsflag; /* initiator port ocp slave flag */ - u32 PAD[3]; - u32 sbtpsflag; /* target port ocp slave flag */ - u32 PAD[11]; - u32 sbtmerrloga; /* (sonics >= 2.3) */ - u32 PAD; - u32 sbtmerrlog; /* (sonics >= 2.3) */ - u32 PAD[3]; - u32 sbadmatch3; /* address match3 */ - u32 PAD; - u32 sbadmatch2; /* address match2 */ - u32 PAD; - u32 sbadmatch1; /* address match1 */ - u32 PAD[7]; - u32 sbimstate; /* initiator agent state */ - u32 sbintvec; /* interrupt mask */ - u32 sbtmstatelow; /* target state */ - u32 sbtmstatehigh; /* target state */ - u32 sbbwa0; /* bandwidth allocation table0 */ - u32 PAD; - u32 sbimconfiglow; /* initiator configuration */ - u32 sbimconfighigh; /* initiator configuration */ - u32 sbadmatch0; /* address match0 */ - u32 PAD; - u32 sbtmconfiglow; /* target configuration */ - u32 sbtmconfighigh; /* target configuration */ - u32 sbbconfig; /* broadcast configuration */ - u32 PAD; - u32 sbbstate; /* broadcast state */ - u32 PAD[3]; - u32 sbactcnfg; /* activate configuration */ - u32 PAD[3]; - u32 sbflagst; /* current sbflags */ - u32 PAD[3]; - u32 sbidlow; /* identification */ - u32 sbidhigh; /* identification */ -}; - -/* sdio core registers */ -struct sdpcmd_regs { - u32 corecontrol; /* 0x00, rev8 */ - u32 corestatus; /* rev8 */ - u32 PAD[1]; - u32 biststatus; /* rev8 */ - - /* PCMCIA access */ - u16 pcmciamesportaladdr; /* 0x010, rev8 */ - u16 PAD[1]; - u16 pcmciamesportalmask; /* rev8 */ - u16 PAD[1]; - u16 pcmciawrframebc; /* rev8 */ - u16 PAD[1]; - u16 pcmciaunderflowtimer; /* rev8 */ - u16 PAD[1]; - - /* interrupt */ - u32 intstatus; /* 0x020, rev8 */ - u32 hostintmask; /* rev8 */ - u32 intmask; /* rev8 */ - u32 sbintstatus; /* rev8 */ - u32 sbintmask; /* rev8 */ - u32 funcintmask; /* rev4 */ - u32 PAD[2]; - u32 tosbmailbox; /* 0x040, rev8 */ - u32 tohostmailbox; /* rev8 */ - u32 tosbmailboxdata; /* rev8 */ - u32 tohostmailboxdata; /* rev8 */ - - /* synchronized access to registers in SDIO clock domain */ - u32 sdioaccess; /* 0x050, rev8 */ - u32 PAD[3]; - - /* PCMCIA frame control */ - u8 pcmciaframectrl; /* 0x060, rev8 */ - u8 PAD[3]; - u8 pcmciawatermark; /* rev8 */ - u8 PAD[155]; - - /* interrupt batching control */ - u32 intrcvlazy; /* 0x100, rev8 */ - u32 PAD[3]; - - /* counters */ - u32 cmd52rd; /* 0x110, rev8 */ - u32 cmd52wr; /* rev8 */ - u32 cmd53rd; /* rev8 */ - u32 cmd53wr; /* rev8 */ - u32 abort; /* rev8 */ - u32 datacrcerror; /* rev8 */ - u32 rdoutofsync; /* rev8 */ - u32 wroutofsync; /* rev8 */ - u32 writebusy; /* rev8 */ - u32 readwait; /* rev8 */ - u32 readterm; /* rev8 */ - u32 writeterm; /* rev8 */ - u32 PAD[40]; - u32 clockctlstatus; /* rev8 */ - u32 PAD[7]; - - u32 PAD[128]; /* DMA engines */ - - /* SDIO/PCMCIA CIS region */ - char cis[512]; /* 0x400-0x5ff, rev6 */ - - /* PCMCIA function control registers */ - char pcmciafcr[256]; /* 0x600-6ff, rev6 */ - u16 PAD[55]; - - /* PCMCIA backplane access */ - u16 backplanecsr; /* 0x76E, rev6 */ - u16 backplaneaddr0; /* rev6 */ - u16 backplaneaddr1; /* rev6 */ - u16 backplaneaddr2; /* rev6 */ - u16 backplaneaddr3; /* rev6 */ - u16 backplanedata0; /* rev6 */ - u16 backplanedata1; /* rev6 */ - u16 backplanedata2; /* rev6 */ - u16 backplanedata3; /* rev6 */ - u16 PAD[31]; - - /* sprom "size" & "blank" info */ - u16 spromstatus; /* 0x7BE, rev2 */ - u32 PAD[464]; - - u16 PAD[0x80]; -}; - -int brcmf_sdio_chip_attach(struct brcmf_sdio_dev *sdiodev, - struct brcmf_chip **ci_ptr); -void brcmf_sdio_chip_detach(struct brcmf_chip **ci_ptr); -void brcmf_sdio_chip_drivestrengthinit(struct brcmf_sdio_dev *sdiodev, - struct brcmf_chip *ci, - u32 drivestrength); -u8 brcmf_sdio_chip_getinfidx(struct brcmf_chip *ci, u16 coreid); -void brcmf_sdio_chip_enter_download(struct brcmf_sdio_dev *sdiodev, - struct brcmf_chip *ci); -bool brcmf_sdio_chip_exit_download(struct brcmf_sdio_dev *sdiodev, - struct brcmf_chip *ci, u32 rstvec); - -#endif /* _BRCMFMAC_SDIO_CHIP_H_ */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h index 092e9c82499..3deab7959a0 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h @@ -180,6 +180,97 @@ struct brcmf_sdio_dev { uint max_request_size; ushort max_segment_count; uint max_segment_size; + uint txglomsz; + struct sg_table sgtable; +}; + +/* sdio core registers */ +struct sdpcmd_regs { + u32 corecontrol; /* 0x00, rev8 */ + u32 corestatus; /* rev8 */ + u32 PAD[1]; + u32 biststatus; /* rev8 */ + + /* PCMCIA access */ + u16 pcmciamesportaladdr; /* 0x010, rev8 */ + u16 PAD[1]; + u16 pcmciamesportalmask; /* rev8 */ + u16 PAD[1]; + u16 pcmciawrframebc; /* rev8 */ + u16 PAD[1]; + u16 pcmciaunderflowtimer; /* rev8 */ + u16 PAD[1]; + + /* interrupt */ + u32 intstatus; /* 0x020, rev8 */ + u32 hostintmask; /* rev8 */ + u32 intmask; /* rev8 */ + u32 sbintstatus; /* rev8 */ + u32 sbintmask; /* rev8 */ + u32 funcintmask; /* rev4 */ + u32 PAD[2]; + u32 tosbmailbox; /* 0x040, rev8 */ + u32 tohostmailbox; /* rev8 */ + u32 tosbmailboxdata; /* rev8 */ + u32 tohostmailboxdata; /* rev8 */ + + /* synchronized access to registers in SDIO clock domain */ + u32 sdioaccess; /* 0x050, rev8 */ + u32 PAD[3]; + + /* PCMCIA frame control */ + u8 pcmciaframectrl; /* 0x060, rev8 */ + u8 PAD[3]; + u8 pcmciawatermark; /* rev8 */ + u8 PAD[155]; + + /* interrupt batching control */ + u32 intrcvlazy; /* 0x100, rev8 */ + u32 PAD[3]; + + /* counters */ + u32 cmd52rd; /* 0x110, rev8 */ + u32 cmd52wr; /* rev8 */ + u32 cmd53rd; /* rev8 */ + u32 cmd53wr; /* rev8 */ + u32 abort; /* rev8 */ + u32 datacrcerror; /* rev8 */ + u32 rdoutofsync; /* rev8 */ + u32 wroutofsync; /* rev8 */ + u32 writebusy; /* rev8 */ + u32 readwait; /* rev8 */ + u32 readterm; /* rev8 */ + u32 writeterm; /* rev8 */ + u32 PAD[40]; + u32 clockctlstatus; /* rev8 */ + u32 PAD[7]; + + u32 PAD[128]; /* DMA engines */ + + /* SDIO/PCMCIA CIS region */ + char cis[512]; /* 0x400-0x5ff, rev6 */ + + /* PCMCIA function control registers */ + char pcmciafcr[256]; /* 0x600-6ff, rev6 */ + u16 PAD[55]; + + /* PCMCIA backplane access */ + u16 backplanecsr; /* 0x76E, rev6 */ + u16 backplaneaddr0; /* rev6 */ + u16 backplaneaddr1; /* rev6 */ + u16 backplaneaddr2; /* rev6 */ + u16 backplaneaddr3; /* rev6 */ + u16 backplanedata0; /* rev6 */ + u16 backplanedata1; /* rev6 */ + u16 backplanedata2; /* rev6 */ + u16 backplanedata3; /* rev6 */ + u16 PAD[31]; + + /* sprom "size" & "blank" info */ + u16 spromstatus; /* 0x7BE, rev2 */ + u32 PAD[464]; + + u16 PAD[0x80]; }; /* Register/deregister interrupt handler. */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index d7718a5fa2f..afb3d15e38f 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -18,6 +18,7 @@ #include <linux/kernel.h> #include <linux/etherdevice.h> +#include <linux/module.h> #include <net/cfg80211.h> #include <net/netlink.h> @@ -190,6 +191,7 @@ static struct ieee80211_supported_band __wl_band_2ghz = { .n_channels = ARRAY_SIZE(__wl_2ghz_channels), .bitrates = wl_g_rates, .n_bitrates = wl_g_rates_size, + .ht_cap = {IEEE80211_HT_CAP_SUP_WIDTH_20_40, true}, }; static struct ieee80211_supported_band __wl_band_5ghz_a = { @@ -251,6 +253,10 @@ struct parsed_vndr_ies { struct parsed_vndr_ie_info ie_info[VNDR_IE_PARSE_LIMIT]; }; +static int brcmf_roamoff; +module_param_named(roamoff, brcmf_roamoff, int, S_IRUSR); +MODULE_PARM_DESC(roamoff, "do not use internal roaming engine"); + /* Quarter dBm units to mW * Table starts at QDBM_OFFSET, so the first entry is mW for qdBm=153 * Table is offset so the last entry is largest mW value that fits in @@ -351,13 +357,11 @@ u16 channel_to_chanspec(struct brcmu_d11inf *d11inf, * triples, returning a pointer to the substring whose first element * matches tag */ -struct brcmf_tlv *brcmf_parse_tlvs(void *buf, int buflen, uint key) +const struct brcmf_tlv * +brcmf_parse_tlvs(const void *buf, int buflen, uint key) { - struct brcmf_tlv *elt; - int totlen; - - elt = (struct brcmf_tlv *)buf; - totlen = buflen; + const struct brcmf_tlv *elt = buf; + int totlen = buflen; /* find tagged parameter */ while (totlen >= TLV_HDR_LEN) { @@ -378,8 +382,8 @@ struct brcmf_tlv *brcmf_parse_tlvs(void *buf, int buflen, uint key) * not update the tlvs buffer pointer/length. */ static bool -brcmf_tlv_has_ie(u8 *ie, u8 **tlvs, u32 *tlvs_len, - u8 *oui, u32 oui_len, u8 type) +brcmf_tlv_has_ie(const u8 *ie, const u8 **tlvs, u32 *tlvs_len, + const u8 *oui, u32 oui_len, u8 type) { /* If the contents match the OUI and the type */ if (ie[TLV_LEN_OFF] >= oui_len + 1 && @@ -401,12 +405,12 @@ brcmf_tlv_has_ie(u8 *ie, u8 **tlvs, u32 *tlvs_len, } static struct brcmf_vs_tlv * -brcmf_find_wpaie(u8 *parse, u32 len) +brcmf_find_wpaie(const u8 *parse, u32 len) { - struct brcmf_tlv *ie; + const struct brcmf_tlv *ie; while ((ie = brcmf_parse_tlvs(parse, len, WLAN_EID_VENDOR_SPECIFIC))) { - if (brcmf_tlv_has_ie((u8 *)ie, &parse, &len, + if (brcmf_tlv_has_ie((const u8 *)ie, &parse, &len, WPA_OUI, TLV_OUI_LEN, WPA_OUI_TYPE)) return (struct brcmf_vs_tlv *)ie; } @@ -414,9 +418,9 @@ brcmf_find_wpaie(u8 *parse, u32 len) } static struct brcmf_vs_tlv * -brcmf_find_wpsie(u8 *parse, u32 len) +brcmf_find_wpsie(const u8 *parse, u32 len) { - struct brcmf_tlv *ie; + const struct brcmf_tlv *ie; while ((ie = brcmf_parse_tlvs(parse, len, WLAN_EID_VENDOR_SPECIFIC))) { if (brcmf_tlv_has_ie((u8 *)ie, &parse, &len, @@ -491,6 +495,19 @@ brcmf_configure_arp_offload(struct brcmf_if *ifp, bool enable) return err; } +static bool brcmf_is_apmode(struct brcmf_cfg80211_vif *vif) +{ + enum nl80211_iftype iftype; + + iftype = vif->wdev.iftype; + return iftype == NL80211_IFTYPE_AP || iftype == NL80211_IFTYPE_P2P_GO; +} + +static bool brcmf_is_ibssmode(struct brcmf_cfg80211_vif *vif) +{ + return vif->wdev.iftype == NL80211_IFTYPE_ADHOC; +} + static struct wireless_dev *brcmf_cfg80211_add_iface(struct wiphy *wiphy, const char *name, enum nl80211_iftype type, @@ -651,7 +668,6 @@ brcmf_cfg80211_change_iface(struct wiphy *wiphy, struct net_device *ndev, type); return -EOPNOTSUPP; case NL80211_IFTYPE_ADHOC: - vif->mode = WL_MODE_IBSS; infra = 0; break; case NL80211_IFTYPE_STATION: @@ -667,12 +683,10 @@ brcmf_cfg80211_change_iface(struct wiphy *wiphy, struct net_device *ndev, */ return 0; } - vif->mode = WL_MODE_BSS; infra = 1; break; case NL80211_IFTYPE_AP: case NL80211_IFTYPE_P2P_GO: - vif->mode = WL_MODE_AP; ap = 1; break; default: @@ -696,7 +710,7 @@ brcmf_cfg80211_change_iface(struct wiphy *wiphy, struct net_device *ndev, err = -EAGAIN; goto done; } - brcmf_dbg(INFO, "IF Type = %s\n", (vif->mode == WL_MODE_IBSS) ? + brcmf_dbg(INFO, "IF Type = %s\n", brcmf_is_ibssmode(vif) ? "Adhoc" : "Infra"); } ndev->ieee80211_ptr->iftype = type; @@ -1340,13 +1354,14 @@ static s32 brcmf_set_auth_type(struct net_device *ndev, } static s32 -brcmf_set_set_cipher(struct net_device *ndev, - struct cfg80211_connect_params *sme) +brcmf_set_wsec_mode(struct net_device *ndev, + struct cfg80211_connect_params *sme, bool mfp) { struct brcmf_cfg80211_profile *profile = ndev_to_prof(ndev); struct brcmf_cfg80211_security *sec; s32 pval = 0; s32 gval = 0; + s32 wsec; s32 err = 0; if (sme->crypto.n_ciphers_pairwise) { @@ -1398,7 +1413,12 @@ brcmf_set_set_cipher(struct net_device *ndev, if (brcmf_find_wpsie(sme->ie, sme->ie_len) && !pval && !gval && sme->privacy) pval = AES_ENABLED; - err = brcmf_fil_bsscfg_int_set(netdev_priv(ndev), "wsec", pval | gval); + + if (mfp) + wsec = pval | gval | MFP_CAPABLE; + else + wsec = pval | gval; + err = brcmf_fil_bsscfg_int_set(netdev_priv(ndev), "wsec", wsec); if (err) { brcmf_err("error (%d)\n", err); return err; @@ -1562,13 +1582,12 @@ brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev, struct ieee80211_channel *chan = sme->channel; struct brcmf_join_params join_params; size_t join_params_size; - struct brcmf_tlv *rsn_ie; - struct brcmf_vs_tlv *wpa_ie; - void *ie; + const struct brcmf_tlv *rsn_ie; + const struct brcmf_vs_tlv *wpa_ie; + const void *ie; u32 ie_len; struct brcmf_ext_join_params_le *ext_join_params; u16 chanspec; - s32 err = 0; brcmf_dbg(TRACE, "Enter\n"); @@ -1591,7 +1610,8 @@ brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev, ie_len = wpa_ie->len + TLV_HDR_LEN; } else { /* find the RSN_IE */ - rsn_ie = brcmf_parse_tlvs((u8 *)sme->ie, sme->ie_len, + rsn_ie = brcmf_parse_tlvs((const u8 *)sme->ie, + sme->ie_len, WLAN_EID_RSN); if (rsn_ie) { ie = rsn_ie; @@ -1636,7 +1656,7 @@ brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev, goto done; } - err = brcmf_set_set_cipher(ndev, sme); + err = brcmf_set_wsec_mode(ndev, sme, sme->mfp == NL80211_MFP_REQUIRED); if (err) { brcmf_err("wl_set_set_cipher failed (%d)\n", err); goto done; @@ -1678,22 +1698,9 @@ brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev, ext_join_params->ssid_le.SSID_len = cpu_to_le32(profile->ssid.SSID_len); memcpy(&ext_join_params->ssid_le.SSID, sme->ssid, profile->ssid.SSID_len); - /*increase dwell time to receive probe response or detect Beacon - * from target AP at a noisy air only during connect command - */ - ext_join_params->scan_le.active_time = - cpu_to_le32(BRCMF_SCAN_JOIN_ACTIVE_DWELL_TIME_MS); - ext_join_params->scan_le.passive_time = - cpu_to_le32(BRCMF_SCAN_JOIN_PASSIVE_DWELL_TIME_MS); + /* Set up join scan parameters */ ext_join_params->scan_le.scan_type = -1; - /* to sync with presence period of VSDB GO. - * Send probe request more frequently. Probe request will be stopped - * when it gets probe response from target AP/GO. - */ - ext_join_params->scan_le.nprobes = - cpu_to_le32(BRCMF_SCAN_JOIN_ACTIVE_DWELL_TIME_MS / - BRCMF_SCAN_JOIN_PROBE_INTERVAL_MS); ext_join_params->scan_le.home_time = cpu_to_le32(-1); if (sme->bssid) @@ -1706,6 +1713,25 @@ brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev, ext_join_params->assoc_le.chanspec_list[0] = cpu_to_le16(chanspec); + /* Increase dwell time to receive probe response or detect + * beacon from target AP at a noisy air only during connect + * command. + */ + ext_join_params->scan_le.active_time = + cpu_to_le32(BRCMF_SCAN_JOIN_ACTIVE_DWELL_TIME_MS); + ext_join_params->scan_le.passive_time = + cpu_to_le32(BRCMF_SCAN_JOIN_PASSIVE_DWELL_TIME_MS); + /* To sync with presence period of VSDB GO send probe request + * more frequently. Probe request will be stopped when it gets + * probe response from target AP/GO. + */ + ext_join_params->scan_le.nprobes = + cpu_to_le32(BRCMF_SCAN_JOIN_ACTIVE_DWELL_TIME_MS / + BRCMF_SCAN_JOIN_PROBE_INTERVAL_MS); + } else { + ext_join_params->scan_le.active_time = cpu_to_le32(-1); + ext_join_params->scan_le.passive_time = cpu_to_le32(-1); + ext_join_params->scan_le.nprobes = cpu_to_le32(-1); } err = brcmf_fil_bsscfg_data_set(ifp, "join", ext_join_params, @@ -1913,7 +1939,7 @@ brcmf_add_keyext(struct wiphy *wiphy, struct net_device *ndev, brcmf_dbg(CONN, "Setting the key index %d\n", key.index); memcpy(key.data, params->key, key.len); - if ((ifp->vif->mode != WL_MODE_AP) && + if (!brcmf_is_apmode(ifp->vif) && (params->cipher == WLAN_CIPHER_SUITE_TKIP)) { brcmf_dbg(CONN, "Swapping RX/TX MIC key\n"); memcpy(keybuf, &key.data[24], sizeof(keybuf)); @@ -1981,7 +2007,9 @@ brcmf_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev, if (!check_vif_up(ifp->vif)) return -EIO; - if (mac_addr) { + if (mac_addr && + (params->cipher != WLAN_CIPHER_SUITE_WEP40) && + (params->cipher != WLAN_CIPHER_SUITE_WEP104)) { brcmf_dbg(TRACE, "Exit"); return brcmf_add_keyext(wiphy, ndev, key_idx, mac_addr, params); } @@ -2010,7 +2038,7 @@ brcmf_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev, brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_WEP104\n"); break; case WLAN_CIPHER_SUITE_TKIP: - if (ifp->vif->mode != WL_MODE_AP) { + if (!brcmf_is_apmode(ifp->vif)) { brcmf_dbg(CONN, "Swapping RX/TX MIC key\n"); memcpy(keybuf, &key.data[24], sizeof(keybuf)); memcpy(&key.data[24], &key.data[16], sizeof(keybuf)); @@ -2164,12 +2192,14 @@ brcmf_cfg80211_get_station(struct wiphy *wiphy, struct net_device *ndev, s32 err = 0; u8 *bssid = profile->bssid; struct brcmf_sta_info_le sta_info_le; + u32 beacon_period; + u32 dtim_period; brcmf_dbg(TRACE, "Enter, MAC %pM\n", mac); if (!check_vif_up(ifp->vif)) return -EIO; - if (ifp->vif->mode == WL_MODE_AP) { + if (brcmf_is_apmode(ifp->vif)) { memcpy(&sta_info_le, mac, ETH_ALEN); err = brcmf_fil_iovar_data_get(ifp, "sta_info", &sta_info_le, @@ -2186,7 +2216,7 @@ brcmf_cfg80211_get_station(struct wiphy *wiphy, struct net_device *ndev, } brcmf_dbg(TRACE, "STA idle time : %d ms, connected time :%d sec\n", sinfo->inactive_time, sinfo->connected_time); - } else if (ifp->vif->mode == WL_MODE_BSS) { + } else if (ifp->vif->wdev.iftype == NL80211_IFTYPE_STATION) { if (memcmp(mac, bssid, ETH_ALEN)) { brcmf_err("Wrong Mac address cfg_mac-%pM wl_bssid-%pM\n", mac, bssid); @@ -2218,6 +2248,30 @@ brcmf_cfg80211_get_station(struct wiphy *wiphy, struct net_device *ndev, sinfo->signal = rssi; brcmf_dbg(CONN, "RSSI %d dBm\n", rssi); } + err = brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_BCNPRD, + &beacon_period); + if (err) { + brcmf_err("Could not get beacon period (%d)\n", + err); + goto done; + } else { + sinfo->bss_param.beacon_interval = + beacon_period; + brcmf_dbg(CONN, "Beacon peroid %d\n", + beacon_period); + } + err = brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_DTIMPRD, + &dtim_period); + if (err) { + brcmf_err("Could not get DTIM period (%d)\n", + err); + goto done; + } else { + sinfo->bss_param.dtim_period = dtim_period; + brcmf_dbg(CONN, "DTIM peroid %d\n", + dtim_period); + } + sinfo->filled |= STATION_INFO_BSS_PARAM; } } else err = -EPERM; @@ -2444,18 +2498,13 @@ CleanUp: return err; } -static bool brcmf_is_ibssmode(struct brcmf_cfg80211_vif *vif) -{ - return vif->mode == WL_MODE_IBSS; -} - static s32 brcmf_update_bss_info(struct brcmf_cfg80211_info *cfg, struct brcmf_if *ifp) { struct brcmf_cfg80211_profile *profile = ndev_to_prof(ifp->ndev); struct brcmf_bss_info_le *bi; struct brcmf_ssid *ssid; - struct brcmf_tlv *tim; + const struct brcmf_tlv *tim; u16 beacon_interval; u8 dtim_period; size_t ie_len; @@ -3220,8 +3269,9 @@ static bool brcmf_valid_wpa_oui(u8 *oui, bool is_rsn_ie) } static s32 -brcmf_configure_wpaie(struct net_device *ndev, struct brcmf_vs_tlv *wpa_ie, - bool is_rsn_ie) +brcmf_configure_wpaie(struct net_device *ndev, + const struct brcmf_vs_tlv *wpa_ie, + bool is_rsn_ie) { struct brcmf_if *ifp = netdev_priv(ndev); u32 auth = 0; /* d11 open authentication */ @@ -3707,11 +3757,11 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, s32 ie_offset; struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); struct brcmf_if *ifp = netdev_priv(ndev); - struct brcmf_tlv *ssid_ie; + const struct brcmf_tlv *ssid_ie; struct brcmf_ssid_le ssid_le; s32 err = -EPERM; - struct brcmf_tlv *rsn_ie; - struct brcmf_vs_tlv *wpa_ie; + const struct brcmf_tlv *rsn_ie; + const struct brcmf_vs_tlv *wpa_ie; struct brcmf_join_params join_params; enum nl80211_iftype dev_role; struct brcmf_fil_bss_enable_le bss_enable; @@ -4220,32 +4270,6 @@ static struct cfg80211_ops wl_cfg80211_ops = { CFG80211_TESTMODE_CMD(brcmf_cfg80211_testmode) }; -static s32 brcmf_nl80211_iftype_to_mode(enum nl80211_iftype type) -{ - switch (type) { - case NL80211_IFTYPE_AP_VLAN: - case NL80211_IFTYPE_WDS: - case NL80211_IFTYPE_MONITOR: - case NL80211_IFTYPE_MESH_POINT: - return -ENOTSUPP; - case NL80211_IFTYPE_ADHOC: - return WL_MODE_IBSS; - case NL80211_IFTYPE_STATION: - case NL80211_IFTYPE_P2P_CLIENT: - return WL_MODE_BSS; - case NL80211_IFTYPE_AP: - case NL80211_IFTYPE_P2P_GO: - return WL_MODE_AP; - case NL80211_IFTYPE_P2P_DEVICE: - return WL_MODE_P2P; - case NL80211_IFTYPE_UNSPECIFIED: - default: - break; - } - - return -EINVAL; -} - static void brcmf_wiphy_pno_params(struct wiphy *wiphy) { /* scheduled scan settings */ @@ -4370,7 +4394,6 @@ struct brcmf_cfg80211_vif *brcmf_alloc_vif(struct brcmf_cfg80211_info *cfg, vif->wdev.wiphy = cfg->wiphy; vif->wdev.iftype = type; - vif->mode = brcmf_nl80211_iftype_to_mode(type); vif->pm_block = pm_block; vif->roam_off = -1; @@ -4416,7 +4439,9 @@ static bool brcmf_is_linkdown(const struct brcmf_event_msg *e) u32 event = e->event_code; u16 flags = e->flags; - if (event == BRCMF_E_LINK && (!(flags & BRCMF_EVENT_MSG_LINK))) { + if ((event == BRCMF_E_DEAUTH) || (event == BRCMF_E_DEAUTH_IND) || + (event == BRCMF_E_DISASSOC_IND) || + ((event == BRCMF_E_LINK) && (!(flags & BRCMF_EVENT_MSG_LINK)))) { brcmf_dbg(CONN, "Processing link down\n"); return true; } @@ -4658,16 +4683,19 @@ brcmf_notify_connect_status(struct brcmf_if *ifp, struct brcmf_cfg80211_info *cfg = ifp->drvr->config; struct net_device *ndev = ifp->ndev; struct brcmf_cfg80211_profile *profile = &ifp->vif->profile; + struct ieee80211_channel *chan; s32 err = 0; + u16 reason; - if (ifp->vif->mode == WL_MODE_AP) { + if (brcmf_is_apmode(ifp->vif)) { err = brcmf_notify_connect_status_ap(cfg, ndev, e, data); } else if (brcmf_is_linkup(e)) { brcmf_dbg(CONN, "Linkup\n"); if (brcmf_is_ibssmode(ifp->vif)) { + chan = ieee80211_get_channel(cfg->wiphy, cfg->channel); memcpy(profile->bssid, e->addr, ETH_ALEN); wl_inform_ibss(cfg, ndev, e->addr); - cfg80211_ibss_joined(ndev, e->addr, GFP_KERNEL); + cfg80211_ibss_joined(ndev, e->addr, chan, GFP_KERNEL); clear_bit(BRCMF_VIF_STATUS_CONNECTING, &ifp->vif->sme_state); set_bit(BRCMF_VIF_STATUS_CONNECTED, @@ -4679,9 +4707,15 @@ brcmf_notify_connect_status(struct brcmf_if *ifp, if (!brcmf_is_ibssmode(ifp->vif)) { brcmf_bss_connect_done(cfg, ndev, e, false); if (test_and_clear_bit(BRCMF_VIF_STATUS_CONNECTED, - &ifp->vif->sme_state)) - cfg80211_disconnected(ndev, 0, NULL, 0, + &ifp->vif->sme_state)) { + reason = 0; + if (((e->event_code == BRCMF_E_DEAUTH_IND) || + (e->event_code == BRCMF_E_DISASSOC_IND)) && + (e->reason != WLAN_REASON_UNSPECIFIED)) + reason = e->reason; + cfg80211_disconnected(ndev, reason, NULL, 0, GFP_KERNEL); + } } brcmf_link_down(ifp->vif); brcmf_init_prof(ndev_to_prof(ndev)); @@ -4875,11 +4909,8 @@ static s32 wl_init_priv(struct brcmf_cfg80211_info *cfg) cfg->scan_request = NULL; cfg->pwr_save = true; - cfg->roam_on = true; /* roam on & off switch. - we enable roam per default */ - cfg->active_scan = true; /* we do active scan for - specific scan per default */ - cfg->dongle_up = false; /* dongle is not up yet */ + cfg->active_scan = true; /* we do active scan per default */ + cfg->dongle_up = false; /* dongle is not up yet */ err = brcmf_init_priv_mem(cfg); if (err) return err; @@ -4904,6 +4935,30 @@ static void init_vif_event(struct brcmf_cfg80211_vif_event *event) mutex_init(&event->vif_event_lock); } +static int brcmf_enable_bw40_2g(struct brcmf_if *ifp) +{ + struct brcmf_fil_bwcap_le band_bwcap; + u32 val; + int err; + + /* verify support for bw_cap command */ + val = WLC_BAND_5G; + err = brcmf_fil_iovar_int_get(ifp, "bw_cap", &val); + + if (!err) { + /* only set 2G bandwidth using bw_cap command */ + band_bwcap.band = cpu_to_le32(WLC_BAND_2G); + band_bwcap.bw_cap = cpu_to_le32(WLC_BW_40MHZ_BIT); + err = brcmf_fil_iovar_data_set(ifp, "bw_cap", &band_bwcap, + sizeof(band_bwcap)); + } else { + brcmf_dbg(INFO, "fallback to mimo_bw_cap\n"); + val = WLC_N_BW_40ALL; + err = brcmf_fil_iovar_int_set(ifp, "mimo_bw_cap", val); + } + return err; +} + struct brcmf_cfg80211_info *brcmf_cfg80211_attach(struct brcmf_pub *drvr, struct device *busdev) { @@ -4961,6 +5016,17 @@ struct brcmf_cfg80211_info *brcmf_cfg80211_attach(struct brcmf_pub *drvr, goto cfg80211_p2p_attach_out; } + /* If cfg80211 didn't disable 40MHz HT CAP in wiphy_register(), + * setup 40MHz in 2GHz band and enable OBSS scanning. + */ + if (wiphy->bands[IEEE80211_BAND_2GHZ]->ht_cap.cap & + IEEE80211_HT_CAP_SUP_WIDTH_20_40) { + err = brcmf_enable_bw40_2g(ifp); + if (!err) + err = brcmf_fil_iovar_int_set(ifp, "obss_coex", + BRCMF_OBSS_COEX_AUTO); + } + err = brcmf_fil_iovar_int_set(ifp, "tdls_enable", 1); if (err) { brcmf_dbg(INFO, "TDLS not enabled (%d)\n", err); @@ -4999,7 +5065,7 @@ void brcmf_cfg80211_detach(struct brcmf_cfg80211_info *cfg) } static s32 -brcmf_dongle_roam(struct brcmf_if *ifp, u32 roamvar, u32 bcn_timeout) +brcmf_dongle_roam(struct brcmf_if *ifp, u32 bcn_timeout) { s32 err = 0; __le32 roamtrigger[2]; @@ -5009,7 +5075,7 @@ brcmf_dongle_roam(struct brcmf_if *ifp, u32 roamvar, u32 bcn_timeout) * Setup timeout if Beacons are lost and roam is * off to report link down */ - if (roamvar) { + if (brcmf_roamoff) { err = brcmf_fil_iovar_int_set(ifp, "bcn_timeout", bcn_timeout); if (err) { brcmf_err("bcn_timeout error (%d)\n", err); @@ -5021,8 +5087,9 @@ brcmf_dongle_roam(struct brcmf_if *ifp, u32 roamvar, u32 bcn_timeout) * Enable/Disable built-in roaming to allow supplicant * to take care of roaming */ - brcmf_dbg(INFO, "Internal Roaming = %s\n", roamvar ? "Off" : "On"); - err = brcmf_fil_iovar_int_set(ifp, "roam_off", roamvar); + brcmf_dbg(INFO, "Internal Roaming = %s\n", + brcmf_roamoff ? "Off" : "On"); + err = brcmf_fil_iovar_int_set(ifp, "roam_off", !!(brcmf_roamoff)); if (err) { brcmf_err("roam_off error (%d)\n", err); goto dongle_rom_out; @@ -5164,9 +5231,6 @@ static s32 brcmf_construct_reginfo(struct brcmf_cfg80211_info *cfg, ieee80211_channel_to_frequency(ch.chnum, band); band_chan_arr[index].hw_value = ch.chnum; - brcmf_err("channel %d: f=%d bw=%d sb=%d\n", - ch.chnum, band_chan_arr[index].center_freq, - ch.bw, ch.sb); if (ch.bw == BRCMU_CHAN_BW_40) { /* assuming the order is HT20, HT40 Upper, * HT40 lower from chanspecs @@ -5267,6 +5331,8 @@ static s32 brcmf_update_wiphybands(struct brcmf_cfg80211_info *cfg) u32 band_list[3]; u32 nmode; u32 bw_cap[2] = { 0, 0 }; + u32 rxchain; + u32 nchain; s8 phy; s32 err; u32 nband; @@ -5303,6 +5369,16 @@ static s32 brcmf_update_wiphybands(struct brcmf_cfg80211_info *cfg) brcmf_dbg(INFO, "nmode=%d, bw_cap=(%d, %d)\n", nmode, bw_cap[IEEE80211_BAND_2GHZ], bw_cap[IEEE80211_BAND_5GHZ]); + err = brcmf_fil_iovar_int_get(ifp, "rxchain", &rxchain); + if (err) { + brcmf_err("rxchain error (%d)\n", err); + nchain = 1; + } else { + for (nchain = 0; rxchain; nchain++) + rxchain = rxchain & (rxchain - 1); + } + brcmf_dbg(INFO, "nchain=%d\n", nchain); + err = brcmf_construct_reginfo(cfg, bw_cap); if (err) { brcmf_err("brcmf_construct_reginfo failed (%d)\n", err); @@ -5331,10 +5407,7 @@ static s32 brcmf_update_wiphybands(struct brcmf_cfg80211_info *cfg) band->ht_cap.ht_supported = true; band->ht_cap.ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K; band->ht_cap.ampdu_density = IEEE80211_HT_MPDU_DENSITY_16; - /* An HT shall support all EQM rates for one spatial - * stream - */ - band->ht_cap.mcs.rx_mask[0] = 0xff; + memset(band->ht_cap.mcs.rx_mask, 0xff, nchain); band->ht_cap.mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED; bands[band->band] = band; } @@ -5381,7 +5454,7 @@ static s32 brcmf_config_dongle(struct brcmf_cfg80211_info *cfg) brcmf_dbg(INFO, "power save set to %s\n", (power_mode ? "enabled" : "disabled")); - err = brcmf_dongle_roam(ifp, (cfg->roam_on ? 0 : 1), WL_BEACON_TIMEOUT); + err = brcmf_dongle_roam(ifp, WL_BEACON_TIMEOUT); if (err) goto default_conf_out; err = brcmf_cfg80211_change_iface(wdev->wiphy, ndev, wdev->iftype, diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h index 2dc6a074e8e..283c525a44f 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h @@ -89,21 +89,6 @@ enum brcmf_scan_status { BRCMF_SCAN_STATUS_SUPPRESS, }; -/** - * enum wl_mode - driver mode of virtual interface. - * - * @WL_MODE_BSS: connects to BSS. - * @WL_MODE_IBSS: operate as ad-hoc. - * @WL_MODE_AP: operate as access-point. - * @WL_MODE_P2P: provide P2P discovery. - */ -enum wl_mode { - WL_MODE_BSS, - WL_MODE_IBSS, - WL_MODE_AP, - WL_MODE_P2P -}; - /* dongle configuration */ struct brcmf_cfg80211_conf { u32 frag_threshold; @@ -193,7 +178,6 @@ struct vif_saved_ie { * @ifp: lower layer interface pointer * @wdev: wireless device. * @profile: profile information. - * @mode: operating mode. * @roam_off: roaming state. * @sme_state: SME state using enum brcmf_vif_status bits. * @pm_block: power-management blocked. @@ -204,7 +188,6 @@ struct brcmf_cfg80211_vif { struct brcmf_if *ifp; struct wireless_dev wdev; struct brcmf_cfg80211_profile profile; - s32 mode; s32 roam_off; unsigned long sme_state; bool pm_block; @@ -402,7 +385,6 @@ struct brcmf_cfg80211_info { bool ibss_starter; bool pwr_save; bool dongle_up; - bool roam_on; bool scan_tried; u8 *dcmd_buf; u8 *extra_buf; @@ -491,7 +473,8 @@ void brcmf_free_vif(struct brcmf_cfg80211_vif *vif); s32 brcmf_vif_set_mgmt_ie(struct brcmf_cfg80211_vif *vif, s32 pktflag, const u8 *vndr_ie_buf, u32 vndr_ie_len); s32 brcmf_vif_clear_mgmt_ies(struct brcmf_cfg80211_vif *vif); -struct brcmf_tlv *brcmf_parse_tlvs(void *buf, int buflen, uint key); +const struct brcmf_tlv * +brcmf_parse_tlvs(const void *buf, int buflen, uint key); u16 channel_to_chanspec(struct brcmu_d11inf *d11inf, struct ieee80211_channel *ch); u32 wl_get_vif_state_all(struct brcmf_cfg80211_info *cfg, unsigned long state); diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c index 925034b80e9..8c5fa4e5813 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c @@ -426,6 +426,12 @@ static int brcms_ops_start(struct ieee80211_hw *hw) bool blocked; int err; + if (!wl->ucode.bcm43xx_bomminor) { + err = brcms_request_fw(wl, wl->wlc->hw->d11core); + if (err) + return -ENOENT; + } + ieee80211_wake_queues(hw); spin_lock_bh(&wl->lock); blocked = brcms_rfkill_set_hw_state(wl); @@ -433,14 +439,6 @@ static int brcms_ops_start(struct ieee80211_hw *hw) if (!blocked) wiphy_rfkill_stop_polling(wl->pub->ieee_hw->wiphy); - if (!wl->ucode.bcm43xx_bomminor) { - err = brcms_request_fw(wl, wl->wlc->hw->d11core); - if (err) { - brcms_remove(wl->wlc->hw->d11core); - return -ENOENT; - } - } - spin_lock_bh(&wl->lock); /* avoid acknowledging frames before a non-monitor device is added */ wl->mute_tx = true; @@ -1094,12 +1092,6 @@ static int ieee_hw_init(struct ieee80211_hw *hw) * Attach to the WL device identified by vendor and device parameters. * regs is a host accessible memory address pointing to WL device registers. * - * brcms_attach is not defined as static because in the case where no bus - * is defined, wl_attach will never be called, and thus, gcc will issue - * a warning that this function is defined but not used if we declare - * it as static. - * - * * is called in brcms_bcma_probe() context, therefore no locking required. */ static struct brcms_info *brcms_attach(struct bcma_device *pdev) diff --git a/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h b/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h index 6fa5d486378..d816270db3b 100644 --- a/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h +++ b/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h @@ -43,5 +43,6 @@ #define BCM4335_CHIP_ID 0x4335 #define BCM43362_CHIP_ID 43362 #define BCM4339_CHIP_ID 0x4339 +#define BCM4354_CHIP_ID 0x4354 #endif /* _BRCM_HW_IDS_H_ */ diff --git a/drivers/net/wireless/brcm80211/include/brcmu_wifi.h b/drivers/net/wireless/brcm80211/include/brcmu_wifi.h index 7ca2aa1035b..74419d4bd12 100644 --- a/drivers/net/wireless/brcm80211/include/brcmu_wifi.h +++ b/drivers/net/wireless/brcm80211/include/brcmu_wifi.h @@ -217,6 +217,9 @@ static inline bool ac_bitmap_tst(u8 bitmap, int prec) #define WSEC_SWFLAG 0x0008 /* to go into transition mode without setting wep */ #define SES_OW_ENABLED 0x0040 +/* MFP */ +#define MFP_CAPABLE 0x0200 +#define MFP_REQUIRED 0x0400 /* WPA authentication mode bitvec */ #define WPA_AUTH_DISABLED 0x0000 /* Legacy (i.e., non-WPA) */ |