diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-core.c')
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-core.c | 276 |
1 files changed, 143 insertions, 133 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index bafbe57c960..213c80c6a66 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -2,7 +2,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved. + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -41,6 +41,7 @@ #include "iwl-power.h" #include "iwl-sta.h" #include "iwl-helpers.h" +#include "iwl-agn.h" /* @@ -67,30 +68,6 @@ u32 iwl_debug_level; const u8 iwl_bcast_addr[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }; - -/* This function both allocates and initializes hw and priv. */ -struct ieee80211_hw *iwl_alloc_all(struct iwl_cfg *cfg) -{ - struct iwl_priv *priv; - /* mac80211 allocates memory for this device instance, including - * space for this driver's private structure */ - struct ieee80211_hw *hw; - - hw = ieee80211_alloc_hw(sizeof(struct iwl_priv), - cfg->ops->ieee80211_ops); - if (hw == NULL) { - pr_err("%s: Can not allocate network device\n", - cfg->name); - goto out; - } - - priv = hw->priv; - priv->hw = hw; - -out: - return hw; -} - #define MAX_BIT_RATE_40_MHZ 150 /* Mbps */ #define MAX_BIT_RATE_20_MHZ 72 /* Mbps */ static void iwlcore_init_ht_hw_capab(const struct iwl_priv *priv, @@ -118,7 +95,7 @@ static void iwlcore_init_ht_hw_capab(const struct iwl_priv *priv, max_bit_rate = MAX_BIT_RATE_40_MHZ; } - if (priv->cfg->mod_params->amsdu_size_8K) + if (iwlagn_mod_params.amsdu_size_8K) ht_info->cap |= IEEE80211_HT_CAP_MAX_AMSDU; ht_info->ampdu_factor = CFG_HT_RX_AMPDU_FACTOR_DEF; @@ -159,6 +136,7 @@ int iwlcore_init_geos(struct iwl_priv *priv) struct ieee80211_channel *geo_ch; struct ieee80211_rate *rates; int i = 0; + s8 max_tx_power = IWLAGN_TX_POWER_TARGET_POWER_MIN; if (priv->bands[IEEE80211_BAND_2GHZ].n_bitrates || priv->bands[IEEE80211_BAND_5GHZ].n_bitrates) { @@ -232,8 +210,8 @@ int iwlcore_init_geos(struct iwl_priv *priv) geo_ch->flags |= ch->ht40_extension_channel; - if (ch->max_power_avg > priv->tx_power_device_lmt) - priv->tx_power_device_lmt = ch->max_power_avg; + if (ch->max_power_avg > max_tx_power) + max_tx_power = ch->max_power_avg; } else { geo_ch->flags |= IEEE80211_CHAN_DISABLED; } @@ -246,6 +224,10 @@ int iwlcore_init_geos(struct iwl_priv *priv) geo_ch->flags); } + priv->tx_power_device_lmt = max_tx_power; + priv->tx_power_user_lmt = max_tx_power; + priv->tx_power_next = max_tx_power; + if ((priv->bands[IEEE80211_BAND_5GHZ].n_channels == 0) && priv->cfg->sku & IWL_SKU_A) { IWL_INFO(priv, "Incorrectly detected BG card as ABG. " @@ -434,72 +416,72 @@ void iwl_set_rxon_hwcrypto(struct iwl_priv *priv, struct iwl_rxon_context *ctx, int iwl_check_rxon_cmd(struct iwl_priv *priv, struct iwl_rxon_context *ctx) { struct iwl_rxon_cmd *rxon = &ctx->staging; - bool error = false; + u32 errors = 0; if (rxon->flags & RXON_FLG_BAND_24G_MSK) { if (rxon->flags & RXON_FLG_TGJ_NARROW_BAND_MSK) { IWL_WARN(priv, "check 2.4G: wrong narrow\n"); - error = true; + errors |= BIT(0); } if (rxon->flags & RXON_FLG_RADAR_DETECT_MSK) { IWL_WARN(priv, "check 2.4G: wrong radar\n"); - error = true; + errors |= BIT(1); } } else { if (!(rxon->flags & RXON_FLG_SHORT_SLOT_MSK)) { IWL_WARN(priv, "check 5.2G: not short slot!\n"); - error = true; + errors |= BIT(2); } if (rxon->flags & RXON_FLG_CCK_MSK) { IWL_WARN(priv, "check 5.2G: CCK!\n"); - error = true; + errors |= BIT(3); } } if ((rxon->node_addr[0] | rxon->bssid_addr[0]) & 0x1) { IWL_WARN(priv, "mac/bssid mcast!\n"); - error = true; + errors |= BIT(4); } /* make sure basic rates 6Mbps and 1Mbps are supported */ if ((rxon->ofdm_basic_rates & IWL_RATE_6M_MASK) == 0 && (rxon->cck_basic_rates & IWL_RATE_1M_MASK) == 0) { IWL_WARN(priv, "neither 1 nor 6 are basic\n"); - error = true; + errors |= BIT(5); } if (le16_to_cpu(rxon->assoc_id) > 2007) { IWL_WARN(priv, "aid > 2007\n"); - error = true; + errors |= BIT(6); } if ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK)) == (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK)) { IWL_WARN(priv, "CCK and short slot\n"); - error = true; + errors |= BIT(7); } if ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK)) == (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK)) { IWL_WARN(priv, "CCK and auto detect"); - error = true; + errors |= BIT(8); } if ((rxon->flags & (RXON_FLG_AUTO_DETECT_MSK | RXON_FLG_TGG_PROTECT_MSK)) == RXON_FLG_TGG_PROTECT_MSK) { IWL_WARN(priv, "TGg but no auto-detect\n"); - error = true; + errors |= BIT(9); } - if (error) - IWL_WARN(priv, "Tuning to channel %d\n", - le16_to_cpu(rxon->channel)); - - if (error) { - IWL_ERR(priv, "Invalid RXON\n"); - return -EINVAL; + if (rxon->channel == 0) { + IWL_WARN(priv, "zero channel is invalid\n"); + errors |= BIT(10); } - return 0; + + WARN(errors, "Invalid RXON (%#x), channel %d", + errors, le16_to_cpu(rxon->channel)); + + return errors ? -EINVAL : 0; } /** @@ -861,12 +843,8 @@ void iwl_chswitch_done(struct iwl_priv *priv, bool is_success) if (test_bit(STATUS_EXIT_PENDING, &priv->status)) return; - if (priv->switch_rxon.switch_in_progress) { + if (test_and_clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status)) ieee80211_chswitch_done(ctx->vif, is_success); - mutex_lock(&priv->mutex); - priv->switch_rxon.switch_in_progress = false; - mutex_unlock(&priv->mutex); - } } #ifdef CONFIG_IWLWIFI_DEBUG @@ -890,10 +868,21 @@ void iwl_print_rx_config_cmd(struct iwl_priv *priv, IWL_DEBUG_RADIO(priv, "u16 assoc_id: 0x%x\n", le16_to_cpu(rxon->assoc_id)); } #endif -/** - * iwl_irq_handle_error - called for HW or SW error interrupt from card - */ -void iwl_irq_handle_error(struct iwl_priv *priv) + +static void iwlagn_abort_notification_waits(struct iwl_priv *priv) +{ + unsigned long flags; + struct iwl_notification_wait *wait_entry; + + spin_lock_irqsave(&priv->_agn.notif_wait_lock, flags); + list_for_each_entry(wait_entry, &priv->_agn.notif_waits, list) + wait_entry->aborted = true; + spin_unlock_irqrestore(&priv->_agn.notif_wait_lock, flags); + + wake_up_all(&priv->_agn.notif_waitq); +} + +void iwlagn_fw_error(struct iwl_priv *priv, bool ondemand) { unsigned int reload_msec; unsigned long reload_jiffies; @@ -904,18 +893,64 @@ void iwl_irq_handle_error(struct iwl_priv *priv) /* Cancel currently queued command. */ clear_bit(STATUS_HCMD_ACTIVE, &priv->status); + iwlagn_abort_notification_waits(priv); + + /* Keep the restart process from trying to send host + * commands by clearing the ready bit */ + clear_bit(STATUS_READY, &priv->status); + + wake_up_interruptible(&priv->wait_command_queue); + + if (!ondemand) { + /* + * If firmware keep reloading, then it indicate something + * serious wrong and firmware having problem to recover + * from it. Instead of keep trying which will fill the syslog + * and hang the system, let's just stop it + */ + reload_jiffies = jiffies; + reload_msec = jiffies_to_msecs((long) reload_jiffies - + (long) priv->reload_jiffies); + priv->reload_jiffies = reload_jiffies; + if (reload_msec <= IWL_MIN_RELOAD_DURATION) { + priv->reload_count++; + if (priv->reload_count >= IWL_MAX_CONTINUE_RELOAD_CNT) { + IWL_ERR(priv, "BUG_ON, Stop restarting\n"); + return; + } + } else + priv->reload_count = 0; + } + + if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) { + if (iwlagn_mod_params.restart_fw) { + IWL_DEBUG(priv, IWL_DL_FW_ERRORS, + "Restarting adapter due to uCode error.\n"); + queue_work(priv->workqueue, &priv->restart); + } else + IWL_DEBUG(priv, IWL_DL_FW_ERRORS, + "Detected FW error, but not restarting\n"); + } +} + +/** + * iwl_irq_handle_error - called for HW or SW error interrupt from card + */ +void iwl_irq_handle_error(struct iwl_priv *priv) +{ /* W/A for WiFi/WiMAX coex and WiMAX own the RF */ if (priv->cfg->internal_wimax_coex && (!(iwl_read_prph(priv, APMG_CLK_CTRL_REG) & APMS_CLK_VAL_MRB_FUNC_MODE) || (iwl_read_prph(priv, APMG_PS_CTRL_REG) & APMG_PS_CTRL_VAL_RESET_REQ))) { - wake_up_interruptible(&priv->wait_command_queue); /* - *Keep the restart process from trying to send host - * commands by clearing the INIT status bit + * Keep the restart process from trying to send host + * commands by clearing the ready bit. */ clear_bit(STATUS_READY, &priv->status); + clear_bit(STATUS_HCMD_ACTIVE, &priv->status); + wake_up_interruptible(&priv->wait_command_queue); IWL_ERR(priv, "RF is used by WiMAX\n"); return; } @@ -923,50 +958,17 @@ void iwl_irq_handle_error(struct iwl_priv *priv) IWL_ERR(priv, "Loaded firmware version: %s\n", priv->hw->wiphy->fw_version); - priv->cfg->ops->lib->dump_nic_error_log(priv); - if (priv->cfg->ops->lib->dump_csr) - priv->cfg->ops->lib->dump_csr(priv); - if (priv->cfg->ops->lib->dump_fh) - priv->cfg->ops->lib->dump_fh(priv, NULL, false); - priv->cfg->ops->lib->dump_nic_event_log(priv, false, NULL, false); + iwl_dump_nic_error_log(priv); + iwl_dump_csr(priv); + iwl_dump_fh(priv, NULL, false); + iwl_dump_nic_event_log(priv, false, NULL, false); #ifdef CONFIG_IWLWIFI_DEBUG if (iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) iwl_print_rx_config_cmd(priv, &priv->contexts[IWL_RXON_CTX_BSS]); #endif - wake_up_interruptible(&priv->wait_command_queue); - - /* Keep the restart process from trying to send host - * commands by clearing the INIT status bit */ - clear_bit(STATUS_READY, &priv->status); - - /* - * If firmware keep reloading, then it indicate something - * serious wrong and firmware having problem to recover - * from it. Instead of keep trying which will fill the syslog - * and hang the system, let's just stop it - */ - reload_jiffies = jiffies; - reload_msec = jiffies_to_msecs((long) reload_jiffies - - (long) priv->reload_jiffies); - priv->reload_jiffies = reload_jiffies; - if (reload_msec <= IWL_MIN_RELOAD_DURATION) { - priv->reload_count++; - if (priv->reload_count >= IWL_MAX_CONTINUE_RELOAD_CNT) { - IWL_ERR(priv, "BUG_ON, Stop restarting\n"); - return; - } - } else - priv->reload_count = 0; - - if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) { - IWL_DEBUG(priv, IWL_DL_FW_ERRORS, - "Restarting adapter due to uCode error.\n"); - - if (priv->cfg->mod_params->restart_fw) - queue_work(priv->workqueue, &priv->restart); - } + iwlagn_fw_error(priv, false); } static int iwl_apm_stop_master(struct iwl_priv *priv) @@ -990,6 +992,8 @@ void iwl_apm_stop(struct iwl_priv *priv) { IWL_DEBUG_INFO(priv, "Stop card, put in low power state\n"); + clear_bit(STATUS_DEVICE_ENABLED, &priv->status); + /* Stop device's DMA activity */ iwl_apm_stop_master(priv); @@ -1040,7 +1044,6 @@ int iwl_apm_init(struct iwl_priv *priv) /* * Enable HAP INTA (interrupt from management bus) to * wake device's PCI Express link L1a -> L0s - * NOTE: This is no-op for 3945 (non-existent bit) */ iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A); @@ -1053,20 +1056,18 @@ int iwl_apm_init(struct iwl_priv *priv) * If not (unlikely), enable L0S, so there is at least some * power savings, even without L1. */ - if (priv->cfg->base_params->set_l0s) { - lctl = iwl_pcie_link_ctl(priv); - if ((lctl & PCI_CFG_LINK_CTRL_VAL_L1_EN) == - PCI_CFG_LINK_CTRL_VAL_L1_EN) { - /* L1-ASPM enabled; disable(!) L0S */ - iwl_set_bit(priv, CSR_GIO_REG, - CSR_GIO_REG_VAL_L0S_ENABLED); - IWL_DEBUG_POWER(priv, "L1 Enabled; Disabling L0S\n"); - } else { - /* L1-ASPM disabled; enable(!) L0S */ - iwl_clear_bit(priv, CSR_GIO_REG, - CSR_GIO_REG_VAL_L0S_ENABLED); - IWL_DEBUG_POWER(priv, "L1 Disabled; Enabling L0S\n"); - } + lctl = iwl_pcie_link_ctl(priv); + if ((lctl & PCI_CFG_LINK_CTRL_VAL_L1_EN) == + PCI_CFG_LINK_CTRL_VAL_L1_EN) { + /* L1-ASPM enabled; disable(!) L0S */ + iwl_set_bit(priv, CSR_GIO_REG, + CSR_GIO_REG_VAL_L0S_ENABLED); + IWL_DEBUG_POWER(priv, "L1 Enabled; Disabling L0S\n"); + } else { + /* L1-ASPM disabled; enable(!) L0S */ + iwl_clear_bit(priv, CSR_GIO_REG, + CSR_GIO_REG_VAL_L0S_ENABLED); + IWL_DEBUG_POWER(priv, "L1 Disabled; Enabling L0S\n"); } /* Configure analog phase-lock-loop before activating to D0A */ @@ -1094,27 +1095,21 @@ int iwl_apm_init(struct iwl_priv *priv) } /* - * Enable DMA and BSM (if used) clocks, wait for them to stabilize. - * BSM (Boostrap State Machine) is only in 3945 and 4965; - * later devices (i.e. 5000 and later) have non-volatile SRAM, - * and don't need BSM to restore data after power-saving sleep. + * Enable DMA clock and wait for it to stabilize. * * Write to "CLK_EN_REG"; "1" bits enable clocks, while "0" bits * do not disable clocks. This preserves any hardware bits already * set by default in "CLK_CTRL_REG" after reset. */ - if (priv->cfg->base_params->use_bsm) - iwl_write_prph(priv, APMG_CLK_EN_REG, - APMG_CLK_VAL_DMA_CLK_RQT | APMG_CLK_VAL_BSM_CLK_RQT); - else - iwl_write_prph(priv, APMG_CLK_EN_REG, - APMG_CLK_VAL_DMA_CLK_RQT); + iwl_write_prph(priv, APMG_CLK_EN_REG, APMG_CLK_VAL_DMA_CLK_RQT); udelay(20); /* Disable L1-Active */ iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG, APMG_PCIDEV_STT_VAL_L1_ACT_DIS); + set_bit(STATUS_DEVICE_ENABLED, &priv->status); + out: return ret; } @@ -1430,7 +1425,6 @@ void iwl_mac_remove_interface(struct ieee80211_hw *hw, iwl_teardown_interface(priv, vif, false); - memset(priv->bssid, 0, ETH_ALEN); mutex_unlock(&priv->mutex); IWL_DEBUG_MAC80211(priv, "leave\n"); @@ -1750,21 +1744,13 @@ int iwl_force_reset(struct iwl_priv *priv, int mode, bool external) * detect failure), then fw_restart module parameter * need to be check before performing firmware reload */ - if (!external && !priv->cfg->mod_params->restart_fw) { + if (!external && !iwlagn_mod_params.restart_fw) { IWL_DEBUG_INFO(priv, "Cancel firmware reload based on " "module parameter setting\n"); break; } IWL_ERR(priv, "On demand firmware reload\n"); - /* Set the FW error flag -- cleared on iwl_down */ - set_bit(STATUS_FW_ERROR, &priv->status); - wake_up_interruptible(&priv->wait_command_queue); - /* - * Keep the restart process from trying to send host - * commands by clearing the INIT status bit - */ - clear_bit(STATUS_READY, &priv->status); - queue_work(priv->workqueue, &priv->restart); + iwlagn_fw_error(priv, true); break; } return 0; @@ -1775,6 +1761,7 @@ int iwl_mac_change_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif, { struct iwl_priv *priv = hw->priv; struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif); + struct iwl_rxon_context *bss_ctx = &priv->contexts[IWL_RXON_CTX_BSS]; struct iwl_rxon_context *tmp; u32 interface_modes; int err; @@ -1783,6 +1770,15 @@ int iwl_mac_change_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif, mutex_lock(&priv->mutex); + if (!ctx->vif || !iwl_is_ready_rf(priv)) { + /* + * Huh? But wait ... this can maybe happen when + * we're in the middle of a firmware restart! + */ + err = -EBUSY; + goto out; + } + interface_modes = ctx->interface_modes | ctx->exclusive_interface_modes; if (!(interface_modes & BIT(newtype))) { @@ -1790,6 +1786,19 @@ int iwl_mac_change_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif, goto out; } + /* + * Refuse a change that should be done by moving from the PAN + * context to the BSS context instead, if the BSS context is + * available and can support the new interface type. + */ + if (ctx->ctxid == IWL_RXON_CTX_PAN && !bss_ctx->vif && + (bss_ctx->interface_modes & BIT(newtype) || + bss_ctx->exclusive_interface_modes & BIT(newtype))) { + BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2); + err = -EBUSY; + goto out; + } + if (ctx->exclusive_interface_modes & BIT(newtype)) { for_each_context(priv, tmp) { if (ctx == tmp) @@ -1810,6 +1819,7 @@ int iwl_mac_change_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif, /* success */ iwl_teardown_interface(priv, vif, true); vif->type = newtype; + vif->p2p = newp2p; err = iwl_setup_interface(priv, ctx); WARN_ON(err); /* |