diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/mvm/fw-api.h')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/mvm/fw-api.h | 179 |
1 files changed, 173 insertions, 6 deletions
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h index c62575d86bc..88af6dd2cea 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h @@ -106,6 +106,12 @@ enum { DBG_CFG = 0x9, ANTENNA_COUPLING_NOTIFICATION = 0xa, + /* UMAC scan commands */ + SCAN_CFG_CMD = 0xc, + SCAN_REQ_UMAC = 0xd, + SCAN_ABORT_UMAC = 0xe, + SCAN_COMPLETE_UMAC = 0xf, + /* station table */ ADD_STA_KEY = 0x17, ADD_STA = 0x18, @@ -122,6 +128,11 @@ enum { /* global key */ WEP_KEY = 0x20, + /* TDLS */ + TDLS_CHANNEL_SWITCH_CMD = 0x27, + TDLS_CHANNEL_SWITCH_NOTIFICATION = 0xaa, + TDLS_CONFIG_CMD = 0xa7, + /* MAC and Binding commands */ MAC_CONTEXT_CMD = 0x28, TIME_EVENT_CMD = 0x29, /* both CMD and response */ @@ -190,6 +201,8 @@ enum { /* Power - new power table command */ MAC_PM_POWER_TABLE = 0xa9, + MFUART_LOAD_NOTIFICATION = 0xb1, + REPLY_RX_PHY_CMD = 0xc0, REPLY_RX_MPDU_CMD = 0xc1, BA_NOTIF = 0xc5, @@ -236,11 +249,9 @@ enum { WOWLAN_TX_POWER_PER_DB = 0xe6, /* and for NetDetect */ - NET_DETECT_CONFIG_CMD = 0x54, - NET_DETECT_PROFILES_QUERY_CMD = 0x56, - NET_DETECT_PROFILES_CMD = 0x57, - NET_DETECT_HOTSPOTS_CMD = 0x58, - NET_DETECT_HOTSPOTS_QUERY_CMD = 0x59, + SCAN_OFFLOAD_PROFILES_QUERY_CMD = 0x56, + SCAN_OFFLOAD_HOTSPOTS_CONFIG_CMD = 0x58, + SCAN_OFFLOAD_HOTSPOTS_QUERY_CMD = 0x59, REPLY_MAX = 0xff, }; @@ -1201,6 +1212,21 @@ struct iwl_missed_beacons_notif { } __packed; /* MISSED_BEACON_NTFY_API_S_VER_3 */ /** + * struct iwl_mfuart_load_notif - mfuart image version & status + * ( MFUART_LOAD_NOTIFICATION = 0xb1 ) + * @installed_ver: installed image version + * @external_ver: external image version + * @status: MFUART loading status + * @duration: MFUART loading time +*/ +struct iwl_mfuart_load_notif { + __le32 installed_ver; + __le32 external_ver; + __le32 status; + __le32 duration; +} __packed; /*MFU_LOADER_NTFY_API_S_VER_1*/ + +/** * struct iwl_set_calib_default_cmd - set default value for calibration. * ( SET_CALIB_DEFAULT_CMD = 0x8e ) * @calib_index: the calibration to set value for @@ -1589,7 +1615,7 @@ enum iwl_sf_scenario { #define SF_NUM_TIMEOUT_TYPES 2 /* Aging timer and Idle timer */ /* smart FIFO default values */ -#define SF_W_MARK_SISO 4096 +#define SF_W_MARK_SISO 6144 #define SF_W_MARK_MIMO2 8192 #define SF_W_MARK_MIMO3 6144 #define SF_W_MARK_LEGACY 4096 @@ -1711,4 +1737,145 @@ struct iwl_scd_txq_cfg_cmd { u8 flags; } __packed; +/*********************************** + * TDLS API + ***********************************/ + +/* Type of TDLS request */ +enum iwl_tdls_channel_switch_type { + TDLS_SEND_CHAN_SW_REQ = 0, + TDLS_SEND_CHAN_SW_RESP_AND_MOVE_CH, + TDLS_MOVE_CH, +}; /* TDLS_STA_CHANNEL_SWITCH_CMD_TYPE_API_E_VER_1 */ + +/** + * Switch timing sub-element in a TDLS channel-switch command + * @frame_timestamp: GP2 timestamp of channel-switch request/response packet + * received from peer + * @max_offchan_duration: What amount of microseconds out of a DTIM is given + * to the TDLS off-channel communication. For instance if the DTIM is + * 200TU and the TDLS peer is to be given 25% of the time, the value + * given will be 50TU, or 50 * 1024 if translated into microseconds. + * @switch_time: switch time the peer sent in its channel switch timing IE + * @switch_timout: switch timeout the peer sent in its channel switch timing IE + */ +struct iwl_tdls_channel_switch_timing { + __le32 frame_timestamp; /* GP2 time of peer packet Rx */ + __le32 max_offchan_duration; /* given in micro-seconds */ + __le32 switch_time; /* given in micro-seconds */ + __le32 switch_timeout; /* given in micro-seconds */ +} __packed; /* TDLS_STA_CHANNEL_SWITCH_TIMING_DATA_API_S_VER_1 */ + +#define IWL_TDLS_CH_SW_FRAME_MAX_SIZE 200 + +/** + * TDLS channel switch frame template + * + * A template representing a TDLS channel-switch request or response frame + * + * @switch_time_offset: offset to the channel switch timing IE in the template + * @tx_cmd: Tx parameters for the frame + * @data: frame data + */ +struct iwl_tdls_channel_switch_frame { + __le32 switch_time_offset; + struct iwl_tx_cmd tx_cmd; + u8 data[IWL_TDLS_CH_SW_FRAME_MAX_SIZE]; +} __packed; /* TDLS_STA_CHANNEL_SWITCH_FRAME_API_S_VER_1 */ + +/** + * TDLS channel switch command + * + * The command is sent to initiate a channel switch and also in response to + * incoming TDLS channel-switch request/response packets from remote peers. + * + * @switch_type: see &enum iwl_tdls_channel_switch_type + * @peer_sta_id: station id of TDLS peer + * @ci: channel we switch to + * @timing: timing related data for command + * @frame: channel-switch request/response template, depending to switch_type + */ +struct iwl_tdls_channel_switch_cmd { + u8 switch_type; + __le32 peer_sta_id; + struct iwl_fw_channel_info ci; + struct iwl_tdls_channel_switch_timing timing; + struct iwl_tdls_channel_switch_frame frame; +} __packed; /* TDLS_STA_CHANNEL_SWITCH_CMD_API_S_VER_1 */ + +/** + * TDLS channel switch start notification + * + * @status: non-zero on success + * @offchannel_duration: duration given in microseconds + * @sta_id: peer currently performing the channel-switch with + */ +struct iwl_tdls_channel_switch_notif { + __le32 status; + __le32 offchannel_duration; + __le32 sta_id; +} __packed; /* TDLS_STA_CHANNEL_SWITCH_NTFY_API_S_VER_1 */ + +/** + * TDLS station info + * + * @sta_id: station id of the TDLS peer + * @tx_to_peer_tid: TID reserved vs. the peer for FW based Tx + * @tx_to_peer_ssn: initial SSN the FW should use for Tx on its TID vs the peer + * @is_initiator: 1 if the peer is the TDLS link initiator, 0 otherwise + */ +struct iwl_tdls_sta_info { + u8 sta_id; + u8 tx_to_peer_tid; + __le16 tx_to_peer_ssn; + __le32 is_initiator; +} __packed; /* TDLS_STA_INFO_VER_1 */ + +/** + * TDLS basic config command + * + * @id_and_color: MAC id and color being configured + * @tdls_peer_count: amount of currently connected TDLS peers + * @tx_to_ap_tid: TID reverved vs. the AP for FW based Tx + * @tx_to_ap_ssn: initial SSN the FW should use for Tx on its TID vs. the AP + * @sta_info: per-station info. Only the first tdls_peer_count entries are set + * @pti_req_data_offset: offset of network-level data for the PTI template + * @pti_req_tx_cmd: Tx parameters for PTI request template + * @pti_req_template: PTI request template data + */ +struct iwl_tdls_config_cmd { + __le32 id_and_color; /* mac id and color */ + u8 tdls_peer_count; + u8 tx_to_ap_tid; + __le16 tx_to_ap_ssn; + struct iwl_tdls_sta_info sta_info[IWL_MVM_TDLS_STA_COUNT]; + + __le32 pti_req_data_offset; + struct iwl_tx_cmd pti_req_tx_cmd; + u8 pti_req_template[0]; +} __packed; /* TDLS_CONFIG_CMD_API_S_VER_1 */ + +/** + * TDLS per-station config information from FW + * + * @sta_id: station id of the TDLS peer + * @tx_to_peer_last_seq: last sequence number used by FW during FW-based Tx to + * the peer + */ +struct iwl_tdls_config_sta_info_res { + __le16 sta_id; + __le16 tx_to_peer_last_seq; +} __packed; /* TDLS_STA_INFO_RSP_VER_1 */ + +/** + * TDLS config information from FW + * + * @tx_to_ap_last_seq: last sequence number used by FW during FW-based Tx to AP + * @sta_info: per-station TDLS config information + */ +struct iwl_tdls_config_res { + __le32 tx_to_ap_last_seq; + struct iwl_tdls_config_sta_info_res sta_info[IWL_MVM_TDLS_STA_COUNT]; +} __packed; /* TDLS_CONFIG_RSP_API_S_VER_1 */ + #endif /* __fw_api_h__ */ |