diff options
Diffstat (limited to 'drivers/net/wireless/orinoco')
-rw-r--r-- | drivers/net/wireless/orinoco/Kconfig | 6 | ||||
-rw-r--r-- | drivers/net/wireless/orinoco/fw.c | 6 | ||||
-rw-r--r-- | drivers/net/wireless/orinoco/hw.c | 33 | ||||
-rw-r--r-- | drivers/net/wireless/orinoco/hw.h | 3 | ||||
-rw-r--r-- | drivers/net/wireless/orinoco/main.c | 34 | ||||
-rw-r--r-- | drivers/net/wireless/orinoco/orinoco.h | 1 | ||||
-rw-r--r-- | drivers/net/wireless/orinoco/orinoco_cs.c | 33 | ||||
-rw-r--r-- | drivers/net/wireless/orinoco/spectrum_cs.c | 60 |
8 files changed, 84 insertions, 92 deletions
diff --git a/drivers/net/wireless/orinoco/Kconfig b/drivers/net/wireless/orinoco/Kconfig index 83b635fd778..e2a2c18920a 100644 --- a/drivers/net/wireless/orinoco/Kconfig +++ b/drivers/net/wireless/orinoco/Kconfig @@ -1,8 +1,10 @@ config HERMES tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)" - depends on (PPC_PMAC || PCI || PCMCIA) && WLAN_80211 - depends on CFG80211 + depends on (PPC_PMAC || PCI || PCMCIA) + depends on CFG80211 && CFG80211_WEXT select WIRELESS_EXT + select WEXT_SPY + select WEXT_PRIV select FW_LOADER select CRYPTO select CRYPTO_MICHAEL_MIC diff --git a/drivers/net/wireless/orinoco/fw.c b/drivers/net/wireless/orinoco/fw.c index 1257250a1e2..cfa72962052 100644 --- a/drivers/net/wireless/orinoco/fw.c +++ b/drivers/net/wireless/orinoco/fw.c @@ -28,6 +28,12 @@ static const struct fw_info orinoco_fw[] = { { NULL, "prism_sta_fw.bin", "prism_ap_fw.bin", 0, 1024 }, { "symbol_sp24t_prim_fw", "symbol_sp24t_sec_fw", NULL, 0x00003100, 512 } }; +MODULE_FIRMWARE("agere_sta_fw.bin"); +MODULE_FIRMWARE("agere_ap_fw.bin"); +MODULE_FIRMWARE("prism_sta_fw.bin"); +MODULE_FIRMWARE("prism_ap_fw.bin"); +MODULE_FIRMWARE("symbol_sp24t_prim_fw"); +MODULE_FIRMWARE("symbol_sp24t_sec_fw"); /* Structure used to access fields in FW * Make sure LE decoding macros are used diff --git a/drivers/net/wireless/orinoco/hw.c b/drivers/net/wireless/orinoco/hw.c index 359652d35e6..404830f47ab 100644 --- a/drivers/net/wireless/orinoco/hw.c +++ b/drivers/net/wireless/orinoco/hw.c @@ -60,8 +60,15 @@ static inline fwtype_t determine_firmware_type(struct comp_id *nic_id) /* Set priv->firmware type, determine firmware properties * This function can be called before we have registerred with netdev, * so all errors go out with dev_* rather than printk + * + * If non-NULL stores a firmware description in fw_name. + * If non-NULL stores a HW version in hw_ver + * + * These are output via generic cfg80211 ethtool support. */ -int determine_fw_capabilities(struct orinoco_private *priv) +int determine_fw_capabilities(struct orinoco_private *priv, + char *fw_name, size_t fw_name_len, + u32 *hw_ver) { struct device *dev = priv->dev; hermes_t *hw = &priv->hw; @@ -85,6 +92,12 @@ int determine_fw_capabilities(struct orinoco_private *priv) dev_info(dev, "Hardware identity %04x:%04x:%04x:%04x\n", nic_id.id, nic_id.variant, nic_id.major, nic_id.minor); + if (hw_ver) + *hw_ver = (((nic_id.id & 0xff) << 24) | + ((nic_id.variant & 0xff) << 16) | + ((nic_id.major & 0xff) << 8) | + (nic_id.minor & 0xff)); + priv->firmware_type = determine_firmware_type(&nic_id); /* Get the firmware version */ @@ -135,8 +148,9 @@ int determine_fw_capabilities(struct orinoco_private *priv) case FIRMWARE_TYPE_AGERE: /* Lucent Wavelan IEEE, Lucent Orinoco, Cabletron RoamAbout, ELSA, Melco, HP, IBM, Dell 1150, Compaq 110/210 */ - snprintf(priv->fw_name, sizeof(priv->fw_name) - 1, - "Lucent/Agere %d.%02d", sta_id.major, sta_id.minor); + if (fw_name) + snprintf(fw_name, fw_name_len, "Lucent/Agere %d.%02d", + sta_id.major, sta_id.minor); firmver = ((unsigned long)sta_id.major << 16) | sta_id.minor; @@ -185,8 +199,8 @@ int determine_fw_capabilities(struct orinoco_private *priv) tmp[SYMBOL_MAX_VER_LEN] = '\0'; } - snprintf(priv->fw_name, sizeof(priv->fw_name) - 1, - "Symbol %s", tmp); + if (fw_name) + snprintf(fw_name, fw_name_len, "Symbol %s", tmp); priv->has_ibss = (firmver >= 0x20000); priv->has_wep = (firmver >= 0x15012); @@ -224,9 +238,9 @@ int determine_fw_capabilities(struct orinoco_private *priv) * different and less well tested */ /* D-Link MAC : 00:40:05:* */ /* Addtron MAC : 00:90:D1:* */ - snprintf(priv->fw_name, sizeof(priv->fw_name) - 1, - "Intersil %d.%d.%d", sta_id.major, sta_id.minor, - sta_id.variant); + if (fw_name) + snprintf(fw_name, fw_name_len, "Intersil %d.%d.%d", + sta_id.major, sta_id.minor, sta_id.variant); firmver = ((unsigned long)sta_id.major << 16) | ((unsigned long)sta_id.minor << 8) | sta_id.variant; @@ -245,7 +259,8 @@ int determine_fw_capabilities(struct orinoco_private *priv) } break; } - dev_info(dev, "Firmware determined as %s\n", priv->fw_name); + if (fw_name) + dev_info(dev, "Firmware determined as %s\n", fw_name); return 0; } diff --git a/drivers/net/wireless/orinoco/hw.h b/drivers/net/wireless/orinoco/hw.h index 8df6e8752be..e2f7fdc4d45 100644 --- a/drivers/net/wireless/orinoco/hw.h +++ b/drivers/net/wireless/orinoco/hw.h @@ -24,7 +24,8 @@ struct orinoco_private; struct dev_addr_list; -int determine_fw_capabilities(struct orinoco_private *priv); +int determine_fw_capabilities(struct orinoco_private *priv, char *fw_name, + size_t fw_name_len, u32 *hw_ver); int orinoco_hw_read_card_settings(struct orinoco_private *priv, u8 *dev_addr); int orinoco_hw_allocate_fid(struct orinoco_private *priv); int orinoco_get_bitratemode(int bitrate, int automatic); diff --git a/drivers/net/wireless/orinoco/main.c b/drivers/net/wireless/orinoco/main.c index 7a32bcb0c03..753a1804eee 100644 --- a/drivers/net/wireless/orinoco/main.c +++ b/drivers/net/wireless/orinoco/main.c @@ -83,7 +83,6 @@ #include <linux/device.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> -#include <linux/ethtool.h> #include <linux/suspend.h> #include <linux/if_arp.h> #include <linux/wireless.h> @@ -162,8 +161,6 @@ static const u8 encaps_hdr[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00}; | HERMES_EV_WTERR | HERMES_EV_INFO \ | HERMES_EV_INFDROP) -static const struct ethtool_ops orinoco_ethtool_ops; - /********************************************************************/ /* Data types */ /********************************************************************/ @@ -1994,7 +1991,9 @@ int orinoco_init(struct orinoco_private *priv) goto out; } - err = determine_fw_capabilities(priv); + err = determine_fw_capabilities(priv, wiphy->fw_version, + sizeof(wiphy->fw_version), + &wiphy->hw_version); if (err != 0) { dev_err(dev, "Incompatible firmware, aborting\n"); goto out; @@ -2010,7 +2009,9 @@ int orinoco_init(struct orinoco_private *priv) priv->do_fw_download = 0; /* Check firmware version again */ - err = determine_fw_capabilities(priv); + err = determine_fw_capabilities(priv, wiphy->fw_version, + sizeof(wiphy->fw_version), + &wiphy->hw_version); if (err != 0) { dev_err(dev, "Incompatible firmware, aborting\n"); goto out; @@ -2212,7 +2213,6 @@ int orinoco_if_add(struct orinoco_private *priv, dev->ieee80211_ptr = wdev; dev->netdev_ops = &orinoco_netdev_ops; dev->watchdog_timeo = HZ; /* 1 second timeout */ - dev->ethtool_ops = &orinoco_ethtool_ops; dev->wireless_handlers = &orinoco_handler_def; #ifdef WIRELESS_SPY dev->wireless_data = &priv->wireless_data; @@ -2225,6 +2225,7 @@ int orinoco_if_add(struct orinoco_private *priv, netif_carrier_off(dev); memcpy(dev->dev_addr, wiphy->perm_addr, ETH_ALEN); + memcpy(dev->perm_addr, wiphy->perm_addr, ETH_ALEN); dev->base_addr = base_addr; dev->irq = irq; @@ -2348,27 +2349,6 @@ void orinoco_down(struct orinoco_private *priv) } EXPORT_SYMBOL(orinoco_down); -static void orinoco_get_drvinfo(struct net_device *dev, - struct ethtool_drvinfo *info) -{ - struct orinoco_private *priv = ndev_priv(dev); - - strncpy(info->driver, DRIVER_NAME, sizeof(info->driver) - 1); - strncpy(info->version, DRIVER_VERSION, sizeof(info->version) - 1); - strncpy(info->fw_version, priv->fw_name, sizeof(info->fw_version) - 1); - if (dev->dev.parent) - strncpy(info->bus_info, dev_name(dev->dev.parent), - sizeof(info->bus_info) - 1); - else - snprintf(info->bus_info, sizeof(info->bus_info) - 1, - "PCMCIA %p", priv->hw.iobase); -} - -static const struct ethtool_ops orinoco_ethtool_ops = { - .get_drvinfo = orinoco_get_drvinfo, - .get_link = ethtool_op_get_link, -}; - /********************************************************************/ /* Module initialization */ /********************************************************************/ diff --git a/drivers/net/wireless/orinoco/orinoco.h b/drivers/net/wireless/orinoco/orinoco.h index 9ac6f1dda4b..665ef56f838 100644 --- a/drivers/net/wireless/orinoco/orinoco.h +++ b/drivers/net/wireless/orinoco/orinoco.h @@ -93,7 +93,6 @@ struct orinoco_private { /* Capabilities of the hardware/firmware */ fwtype_t firmware_type; - char fw_name[32]; int ibss_port; int nicbuf_size; u16 channel_mask; diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c index 38c1c9d2abb..f27bb8367c9 100644 --- a/drivers/net/wireless/orinoco/orinoco_cs.c +++ b/drivers/net/wireless/orinoco/orinoco_cs.c @@ -109,7 +109,7 @@ orinoco_cs_probe(struct pcmcia_device *link) struct orinoco_private *priv; struct orinoco_pccard *card; - priv = alloc_orinocodev(sizeof(*card), &handle_to_dev(link), + priv = alloc_orinocodev(sizeof(*card), &link->dev, orinoco_cs_hard_reset, NULL); if (!priv) return -ENOMEM; @@ -120,10 +120,8 @@ orinoco_cs_probe(struct pcmcia_device *link) link->priv = priv; /* Interrupt setup */ - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT; - link->irq.IRQInfo1 = IRQ_LEVEL_ID; + link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; link->irq.Handler = orinoco_interrupt; - link->irq.Instance = priv; /* General socket configuration defaults can go here. In this * client, we assume very little, and rely on the CIS for @@ -160,12 +158,6 @@ static void orinoco_cs_detach(struct pcmcia_device *link) * device available to the system. */ -#define CS_CHECK(fn, ret) do { \ - last_fn = (fn); \ - if ((last_ret = (ret)) != 0) \ - goto cs_failed; \ -} while (0) - static int orinoco_cs_config_check(struct pcmcia_device *p_dev, cistpl_cftable_entry_t *cfg, cistpl_cftable_entry_t *dflt, @@ -240,7 +232,7 @@ orinoco_cs_config(struct pcmcia_device *link) struct orinoco_private *priv = link->priv; struct orinoco_pccard *card = priv->card; hermes_t *hw = &priv->hw; - int last_fn, last_ret; + int ret; void __iomem *mem; /* @@ -257,13 +249,12 @@ orinoco_cs_config(struct pcmcia_device *link) * and most client drivers will only use the CIS to fill in * implementation-defined details. */ - last_ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL); - if (last_ret) { + ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL); + if (ret) { if (!ignore_cis_vcc) printk(KERN_ERR PFX "GetNextTuple(): No matching " "CIS configuration. Maybe you need the " "ignore_cis_vcc=1 parameter.\n"); - cs_error(link, RequestIO, last_ret); goto failed; } @@ -272,14 +263,16 @@ orinoco_cs_config(struct pcmcia_device *link) * a handler to the interrupt, unless the 'Handler' member of * the irq structure is initialized. */ - CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); + ret = pcmcia_request_irq(link, &link->irq); + if (ret) + goto failed; /* We initialize the hermes structure before completing PCMCIA * configuration just in case the interrupt handler gets * called. */ mem = ioport_map(link->io.BasePort1, link->io.NumPorts1); if (!mem) - goto cs_failed; + goto failed; hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING); @@ -288,8 +281,9 @@ orinoco_cs_config(struct pcmcia_device *link) * the I/O windows and the interrupt mapping, and putting the * card and host interface into "Memory and IO" mode. */ - CS_CHECK(RequestConfiguration, - pcmcia_request_configuration(link, &link->conf)); + ret = pcmcia_request_configuration(link, &link->conf); + if (ret) + goto failed; /* Ok, we have the configuration, prepare to register the netdev */ card->node.major = card->node.minor = 0; @@ -315,9 +309,6 @@ orinoco_cs_config(struct pcmcia_device *link) * net_device has been registered */ return 0; - cs_failed: - cs_error(link, last_fn, last_ret); - failed: orinoco_cs_release(link); return -ENODEV; diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c index c361310b885..59bda240fdc 100644 --- a/drivers/net/wireless/orinoco/spectrum_cs.c +++ b/drivers/net/wireless/orinoco/spectrum_cs.c @@ -73,9 +73,6 @@ static void spectrum_cs_release(struct pcmcia_device *link); #define HCR_MEM16 0x10 /* memory width bit, should be preserved */ -#define CS_CHECK(fn, ret) \ - do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) - /* * Reset the card using configuration registers COR and CCSR. * If IDLE is 1, stop the firmware, so that it can be safely rewritten. @@ -83,7 +80,7 @@ static void spectrum_cs_release(struct pcmcia_device *link); static int spectrum_reset(struct pcmcia_device *link, int idle) { - int last_ret, last_fn; + int ret; conf_reg_t reg; u_int save_cor; @@ -95,23 +92,26 @@ spectrum_reset(struct pcmcia_device *link, int idle) reg.Function = 0; reg.Action = CS_READ; reg.Offset = CISREG_COR; - CS_CHECK(AccessConfigurationRegister, - pcmcia_access_configuration_register(link, ®)); + ret = pcmcia_access_configuration_register(link, ®); + if (ret) + goto failed; save_cor = reg.Value; /* Soft-Reset card */ reg.Action = CS_WRITE; reg.Offset = CISREG_COR; reg.Value = (save_cor | COR_SOFT_RESET); - CS_CHECK(AccessConfigurationRegister, - pcmcia_access_configuration_register(link, ®)); + ret = pcmcia_access_configuration_register(link, ®); + if (ret) + goto failed; udelay(1000); /* Read CCSR */ reg.Action = CS_READ; reg.Offset = CISREG_CCSR; - CS_CHECK(AccessConfigurationRegister, - pcmcia_access_configuration_register(link, ®)); + ret = pcmcia_access_configuration_register(link, ®); + if (ret) + goto failed; /* * Start or stop the firmware. Memory width bit should be @@ -120,21 +120,22 @@ spectrum_reset(struct pcmcia_device *link, int idle) reg.Action = CS_WRITE; reg.Offset = CISREG_CCSR; reg.Value = (idle ? HCR_IDLE : HCR_RUN) | (reg.Value & HCR_MEM16); - CS_CHECK(AccessConfigurationRegister, - pcmcia_access_configuration_register(link, ®)); + ret = pcmcia_access_configuration_register(link, ®); + if (ret) + goto failed; udelay(1000); /* Restore original COR configuration index */ reg.Action = CS_WRITE; reg.Offset = CISREG_COR; reg.Value = (save_cor & ~COR_SOFT_RESET); - CS_CHECK(AccessConfigurationRegister, - pcmcia_access_configuration_register(link, ®)); + ret = pcmcia_access_configuration_register(link, ®); + if (ret) + goto failed; udelay(1000); return 0; -cs_failed: - cs_error(link, last_fn, last_ret); +failed: return -ENODEV; } @@ -181,7 +182,7 @@ spectrum_cs_probe(struct pcmcia_device *link) struct orinoco_private *priv; struct orinoco_pccard *card; - priv = alloc_orinocodev(sizeof(*card), &handle_to_dev(link), + priv = alloc_orinocodev(sizeof(*card), &link->dev, spectrum_cs_hard_reset, spectrum_cs_stop_firmware); if (!priv) @@ -193,10 +194,8 @@ spectrum_cs_probe(struct pcmcia_device *link) link->priv = priv; /* Interrupt setup */ - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT; - link->irq.IRQInfo1 = IRQ_LEVEL_ID; + link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; link->irq.Handler = orinoco_interrupt; - link->irq.Instance = priv; /* General socket configuration defaults can go here. In this * client, we assume very little, and rely on the CIS for @@ -307,7 +306,7 @@ spectrum_cs_config(struct pcmcia_device *link) struct orinoco_private *priv = link->priv; struct orinoco_pccard *card = priv->card; hermes_t *hw = &priv->hw; - int last_fn, last_ret; + int ret; void __iomem *mem; /* @@ -324,13 +323,12 @@ spectrum_cs_config(struct pcmcia_device *link) * and most client drivers will only use the CIS to fill in * implementation-defined details. */ - last_ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL); - if (last_ret) { + ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL); + if (ret) { if (!ignore_cis_vcc) printk(KERN_ERR PFX "GetNextTuple(): No matching " "CIS configuration. Maybe you need the " "ignore_cis_vcc=1 parameter.\n"); - cs_error(link, RequestIO, last_ret); goto failed; } @@ -339,14 +337,16 @@ spectrum_cs_config(struct pcmcia_device *link) * a handler to the interrupt, unless the 'Handler' member of * the irq structure is initialized. */ - CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); + ret = pcmcia_request_irq(link, &link->irq); + if (ret) + goto failed; /* We initialize the hermes structure before completing PCMCIA * configuration just in case the interrupt handler gets * called. */ mem = ioport_map(link->io.BasePort1, link->io.NumPorts1); if (!mem) - goto cs_failed; + goto failed; hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING); @@ -355,8 +355,9 @@ spectrum_cs_config(struct pcmcia_device *link) * the I/O windows and the interrupt mapping, and putting the * card and host interface into "Memory and IO" mode. */ - CS_CHECK(RequestConfiguration, - pcmcia_request_configuration(link, &link->conf)); + ret = pcmcia_request_configuration(link, &link->conf); + if (ret) + goto failed; /* Ok, we have the configuration, prepare to register the netdev */ card->node.major = card->node.minor = 0; @@ -386,9 +387,6 @@ spectrum_cs_config(struct pcmcia_device *link) * net_device has been registered */ return 0; - cs_failed: - cs_error(link, last_fn, last_ret); - failed: spectrum_cs_release(link); return -ENODEV; |