diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2800lib.c')
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2800lib.c | 80 |
1 files changed, 74 insertions, 6 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 58fc1d9bacd..a04e2229b33 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -4392,7 +4392,7 @@ void rt2800_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev) } EXPORT_SYMBOL_GPL(rt2800_read_eeprom_efuse); -int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev) +static int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev) { struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; u16 word; @@ -4400,6 +4400,11 @@ int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev) u8 default_lna_gain; /* + * Read the EEPROM. + */ + rt2800_read_eeprom(rt2x00dev); + + /* * Start validation of the data that has been read. */ mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); @@ -4521,9 +4526,8 @@ int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev) return 0; } -EXPORT_SYMBOL_GPL(rt2800_validate_eeprom); -int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev) +static int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev) { u32 reg; u16 value; @@ -4681,7 +4685,6 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev) return 0; } -EXPORT_SYMBOL_GPL(rt2800_init_eeprom); /* * RF value list for rt28xx @@ -4824,7 +4827,7 @@ static const struct rf_channel rf_vals_3x[] = { {173, 0x61, 0, 9}, }; -int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) +static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) { struct hw_mode_spec *spec = &rt2x00dev->spec; struct channel_info *info; @@ -5000,7 +5003,72 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) return 0; } -EXPORT_SYMBOL_GPL(rt2800_probe_hw_mode); + +int rt2800_probe_hw(struct rt2x00_dev *rt2x00dev) +{ + int retval; + u32 reg; + + /* + * Allocate eeprom data. + */ + retval = rt2800_validate_eeprom(rt2x00dev); + if (retval) + return retval; + + retval = rt2800_init_eeprom(rt2x00dev); + if (retval) + return retval; + + /* + * Enable rfkill polling by setting GPIO direction of the + * rfkill switch GPIO pin correctly. + */ + rt2800_register_read(rt2x00dev, GPIO_CTRL, ®); + rt2x00_set_field32(®, GPIO_CTRL_DIR2, 1); + rt2800_register_write(rt2x00dev, GPIO_CTRL, reg); + + /* + * Initialize hw specifications. + */ + retval = rt2800_probe_hw_mode(rt2x00dev); + if (retval) + return retval; + + /* + * Set device capabilities. + */ + __set_bit(CAPABILITY_CONTROL_FILTERS, &rt2x00dev->cap_flags); + __set_bit(CAPABILITY_CONTROL_FILTER_PSPOLL, &rt2x00dev->cap_flags); + if (!rt2x00_is_usb(rt2x00dev)) + __set_bit(CAPABILITY_PRE_TBTT_INTERRUPT, &rt2x00dev->cap_flags); + + /* + * Set device requirements. + */ + if (!rt2x00_is_soc(rt2x00dev)) + __set_bit(REQUIRE_FIRMWARE, &rt2x00dev->cap_flags); + __set_bit(REQUIRE_L2PAD, &rt2x00dev->cap_flags); + __set_bit(REQUIRE_TXSTATUS_FIFO, &rt2x00dev->cap_flags); + if (!rt2800_hwcrypt_disabled(rt2x00dev)) + __set_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags); + __set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags); + __set_bit(REQUIRE_HT_TX_DESC, &rt2x00dev->cap_flags); + if (rt2x00_is_usb(rt2x00dev)) + __set_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags); + else { + __set_bit(REQUIRE_DMA, &rt2x00dev->cap_flags); + __set_bit(REQUIRE_TASKLET_CONTEXT, &rt2x00dev->cap_flags); + } + + /* + * Set the rssi offset. + */ + rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET; + + return 0; +} +EXPORT_SYMBOL_GPL(rt2800_probe_hw); /* * IEEE80211 stack callback functions. |