diff options
Diffstat (limited to 'drivers/net/wireless/ti/wlcore/sdio.c')
-rw-r--r-- | drivers/net/wireless/ti/wlcore/sdio.c | 378 |
1 files changed, 378 insertions, 0 deletions
diff --git a/drivers/net/wireless/ti/wlcore/sdio.c b/drivers/net/wireless/ti/wlcore/sdio.c new file mode 100644 index 00000000000..0a72347cfc4 --- /dev/null +++ b/drivers/net/wireless/ti/wlcore/sdio.c @@ -0,0 +1,378 @@ +/* + * This file is part of wl1271 + * + * Copyright (C) 2009-2010 Nokia Corporation + * + * Contact: Luciano Coelho <luciano.coelho@nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <linux/irq.h> +#include <linux/module.h> +#include <linux/vmalloc.h> +#include <linux/platform_device.h> +#include <linux/mmc/sdio_func.h> +#include <linux/mmc/sdio_ids.h> +#include <linux/mmc/card.h> +#include <linux/mmc/host.h> +#include <linux/gpio.h> +#include <linux/wl12xx.h> +#include <linux/pm_runtime.h> + +#include "wlcore.h" +#include "wl12xx_80211.h" +#include "io.h" + +#ifndef SDIO_VENDOR_ID_TI +#define SDIO_VENDOR_ID_TI 0x0097 +#endif + +#ifndef SDIO_DEVICE_ID_TI_WL1271 +#define SDIO_DEVICE_ID_TI_WL1271 0x4076 +#endif + +struct wl12xx_sdio_glue { + struct device *dev; + struct platform_device *core; +}; + +static const struct sdio_device_id wl1271_devices[] __devinitconst = { + { SDIO_DEVICE(SDIO_VENDOR_ID_TI, SDIO_DEVICE_ID_TI_WL1271) }, + {} +}; +MODULE_DEVICE_TABLE(sdio, wl1271_devices); + +static void wl1271_sdio_set_block_size(struct device *child, + unsigned int blksz) +{ + struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent); + struct sdio_func *func = dev_to_sdio_func(glue->dev); + + sdio_claim_host(func); + sdio_set_block_size(func, blksz); + sdio_release_host(func); +} + +static void wl12xx_sdio_raw_read(struct device *child, int addr, void *buf, + size_t len, bool fixed) +{ + int ret; + struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent); + struct sdio_func *func = dev_to_sdio_func(glue->dev); + + sdio_claim_host(func); + + if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG)) { + ((u8 *)buf)[0] = sdio_f0_readb(func, addr, &ret); + dev_dbg(child->parent, "sdio read 52 addr 0x%x, byte 0x%02x\n", + addr, ((u8 *)buf)[0]); + } else { + if (fixed) + ret = sdio_readsb(func, buf, addr, len); + else + ret = sdio_memcpy_fromio(func, buf, addr, len); + + dev_dbg(child->parent, "sdio read 53 addr 0x%x, %zu bytes\n", + addr, len); + } + + sdio_release_host(func); + + if (ret) + dev_err(child->parent, "sdio read failed (%d)\n", ret); +} + +static void wl12xx_sdio_raw_write(struct device *child, int addr, void *buf, + size_t len, bool fixed) +{ + int ret; + struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent); + struct sdio_func *func = dev_to_sdio_func(glue->dev); + + sdio_claim_host(func); + + if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG)) { + sdio_f0_writeb(func, ((u8 *)buf)[0], addr, &ret); + dev_dbg(child->parent, "sdio write 52 addr 0x%x, byte 0x%02x\n", + addr, ((u8 *)buf)[0]); + } else { + dev_dbg(child->parent, "sdio write 53 addr 0x%x, %zu bytes\n", + addr, len); + + if (fixed) + ret = sdio_writesb(func, addr, buf, len); + else + ret = sdio_memcpy_toio(func, addr, buf, len); + } + + sdio_release_host(func); + + if (ret) + dev_err(child->parent, "sdio write failed (%d)\n", ret); +} + +static int wl12xx_sdio_power_on(struct wl12xx_sdio_glue *glue) +{ + int ret; + struct sdio_func *func = dev_to_sdio_func(glue->dev); + + /* If enabled, tell runtime PM not to power off the card */ + if (pm_runtime_enabled(&func->dev)) { + ret = pm_runtime_get_sync(&func->dev); + if (ret < 0) + goto out; + } else { + /* Runtime PM is disabled: power up the card manually */ + ret = mmc_power_restore_host(func->card->host); + if (ret < 0) + goto out; + } + + sdio_claim_host(func); + sdio_enable_func(func); + sdio_release_host(func); + +out: + return ret; +} + +static int wl12xx_sdio_power_off(struct wl12xx_sdio_glue *glue) +{ + int ret; + struct sdio_func *func = dev_to_sdio_func(glue->dev); + + sdio_claim_host(func); + sdio_disable_func(func); + sdio_release_host(func); + + /* Power off the card manually, even if runtime PM is enabled. */ + ret = mmc_power_save_host(func->card->host); + if (ret < 0) + return ret; + + /* If enabled, let runtime PM know the card is powered off */ + if (pm_runtime_enabled(&func->dev)) + ret = pm_runtime_put_sync(&func->dev); + + return ret; +} + +static int wl12xx_sdio_set_power(struct device *child, bool enable) +{ + struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent); + + if (enable) + return wl12xx_sdio_power_on(glue); + else + return wl12xx_sdio_power_off(glue); +} + +static struct wl1271_if_operations sdio_ops = { + .read = wl12xx_sdio_raw_read, + .write = wl12xx_sdio_raw_write, + .power = wl12xx_sdio_set_power, + .set_block_size = wl1271_sdio_set_block_size, +}; + +static int __devinit wl1271_probe(struct sdio_func *func, + const struct sdio_device_id *id) +{ + struct wl12xx_platform_data *wlan_data; + struct wl12xx_sdio_glue *glue; + struct resource res[1]; + mmc_pm_flag_t mmcflags; + int ret = -ENOMEM; + + /* We are only able to handle the wlan function */ + if (func->num != 0x02) + return -ENODEV; + + glue = kzalloc(sizeof(*glue), GFP_KERNEL); + if (!glue) { + dev_err(&func->dev, "can't allocate glue\n"); + goto out; + } + + glue->dev = &func->dev; + + /* Grab access to FN0 for ELP reg. */ + func->card->quirks |= MMC_QUIRK_LENIENT_FN0; + + /* Use block mode for transferring over one block size of data */ + func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE; + + wlan_data = wl12xx_get_platform_data(); + if (IS_ERR(wlan_data)) { + ret = PTR_ERR(wlan_data); + dev_err(glue->dev, "missing wlan platform data: %d\n", ret); + goto out_free_glue; + } + + /* if sdio can keep power while host is suspended, enable wow */ + mmcflags = sdio_get_host_pm_caps(func); + dev_dbg(glue->dev, "sdio PM caps = 0x%x\n", mmcflags); + + if (mmcflags & MMC_PM_KEEP_POWER) + wlan_data->pwr_in_suspend = true; + + wlan_data->ops = &sdio_ops; + + sdio_set_drvdata(func, glue); + + /* Tell PM core that we don't need the card to be powered now */ + pm_runtime_put_noidle(&func->dev); + + glue->core = platform_device_alloc("wl12xx", -1); + if (!glue->core) { + dev_err(glue->dev, "can't allocate platform_device"); + ret = -ENOMEM; + goto out_free_glue; + } + + glue->core->dev.parent = &func->dev; + + memset(res, 0x00, sizeof(res)); + + res[0].start = wlan_data->irq; + res[0].flags = IORESOURCE_IRQ; + res[0].name = "irq"; + + ret = platform_device_add_resources(glue->core, res, ARRAY_SIZE(res)); + if (ret) { + dev_err(glue->dev, "can't add resources\n"); + goto out_dev_put; + } + + ret = platform_device_add_data(glue->core, wlan_data, + sizeof(*wlan_data)); + if (ret) { + dev_err(glue->dev, "can't add platform data\n"); + goto out_dev_put; + } + + ret = platform_device_add(glue->core); + if (ret) { + dev_err(glue->dev, "can't add platform device\n"); + goto out_dev_put; + } + return 0; + +out_dev_put: + platform_device_put(glue->core); + +out_free_glue: + kfree(glue); + +out: + return ret; +} + +static void __devexit wl1271_remove(struct sdio_func *func) +{ + struct wl12xx_sdio_glue *glue = sdio_get_drvdata(func); + + /* Undo decrement done above in wl1271_probe */ + pm_runtime_get_noresume(&func->dev); + + platform_device_del(glue->core); + platform_device_put(glue->core); + kfree(glue); +} + +#ifdef CONFIG_PM +static int wl1271_suspend(struct device *dev) +{ + /* Tell MMC/SDIO core it's OK to power down the card + * (if it isn't already), but not to remove it completely */ + struct sdio_func *func = dev_to_sdio_func(dev); + struct wl12xx_sdio_glue *glue = sdio_get_drvdata(func); + struct wl1271 *wl = platform_get_drvdata(glue->core); + mmc_pm_flag_t sdio_flags; + int ret = 0; + + dev_dbg(dev, "wl1271 suspend. wow_enabled: %d\n", + wl->wow_enabled); + + /* check whether sdio should keep power */ + if (wl->wow_enabled) { + sdio_flags = sdio_get_host_pm_caps(func); + + if (!(sdio_flags & MMC_PM_KEEP_POWER)) { + dev_err(dev, "can't keep power while host " + "is suspended\n"); + ret = -EINVAL; + goto out; + } + + /* keep power while host suspended */ + ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER); + if (ret) { + dev_err(dev, "error while trying to keep power\n"); + goto out; + } + } +out: + return ret; +} + +static int wl1271_resume(struct device *dev) +{ + dev_dbg(dev, "wl1271 resume\n"); + + return 0; +} + +static const struct dev_pm_ops wl1271_sdio_pm_ops = { + .suspend = wl1271_suspend, + .resume = wl1271_resume, +}; +#endif + +static struct sdio_driver wl1271_sdio_driver = { + .name = "wl1271_sdio", + .id_table = wl1271_devices, + .probe = wl1271_probe, + .remove = __devexit_p(wl1271_remove), +#ifdef CONFIG_PM + .drv = { + .pm = &wl1271_sdio_pm_ops, + }, +#endif +}; + +static int __init wl1271_init(void) +{ + return sdio_register_driver(&wl1271_sdio_driver); +} + +static void __exit wl1271_exit(void) +{ + sdio_unregister_driver(&wl1271_sdio_driver); +} + +module_init(wl1271_init); +module_exit(wl1271_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>"); +MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>"); +MODULE_FIRMWARE(WL127X_FW_NAME_SINGLE); +MODULE_FIRMWARE(WL127X_FW_NAME_MULTI); +MODULE_FIRMWARE(WL127X_PLT_FW_NAME); +MODULE_FIRMWARE(WL128X_FW_NAME_SINGLE); +MODULE_FIRMWARE(WL128X_FW_NAME_MULTI); +MODULE_FIRMWARE(WL128X_PLT_FW_NAME); |