diff options
Diffstat (limited to 'drivers/pci/pci.c')
| -rw-r--r-- | drivers/pci/pci.c | 71 |
1 files changed, 59 insertions, 12 deletions
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index c12f6c79069..48807556b47 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -22,7 +22,7 @@ #include <asm/dma.h> /* isa_dma_bridge_buggy */ #include "pci.h" -unsigned int pci_pm_d3_delay = 10; +unsigned int pci_pm_d3_delay = PCI_PM_D3_WAIT; #ifdef CONFIG_PCI_DOMAINS int pci_domains_supported = 1; @@ -426,6 +426,7 @@ static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable) * given PCI device * @dev: PCI device to handle. * @state: PCI power state (D0, D1, D2, D3hot) to put the device into. + * @wait: If 'true', wait for the device to change its power state * * RETURN VALUE: * -EINVAL if the requested state is invalid. @@ -435,7 +436,7 @@ static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable) * 0 if device's power state has been successfully changed. */ static int -pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) +pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state, bool wait) { u16 pmcsr; bool need_restore = false; @@ -480,8 +481,10 @@ pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) break; case PCI_UNKNOWN: /* Boot-up */ if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot - && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET)) + && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET)) { need_restore = true; + wait = true; + } /* Fall-through: force to D0 */ default: pmcsr = 0; @@ -491,12 +494,15 @@ pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) /* enter specified state */ pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr); + if (!wait) + return 0; + /* Mandatory power management transition delays */ /* see PCI PM 1.1 5.6.1 table 18 */ if (state == PCI_D3hot || dev->current_state == PCI_D3hot) msleep(pci_pm_d3_delay); else if (state == PCI_D2 || dev->current_state == PCI_D2) - udelay(200); + udelay(PCI_PM_D2_DELAY); dev->current_state = state; @@ -515,7 +521,7 @@ pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) if (need_restore) pci_restore_bars(dev); - if (dev->bus->self) + if (wait && dev->bus->self) pcie_aspm_pm_state_change(dev->bus->self); return 0; @@ -585,7 +591,7 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state) if (state == PCI_D3hot && (dev->dev_flags & PCI_DEV_FLAGS_NO_D3)) return 0; - error = pci_raw_set_power_state(dev, state); + error = pci_raw_set_power_state(dev, state, true); if (state > PCI_D0 && platform_pci_power_manageable(dev)) { /* Allow the platform to finalize the transition */ @@ -730,6 +736,7 @@ pci_save_state(struct pci_dev *dev) /* XXX: 100% dword access ok here? */ for (i = 0; i < 16; i++) pci_read_config_dword(dev, i * 4,&dev->saved_config_space[i]); + dev->state_saved = true; if ((i = pci_save_pcie_state(dev)) != 0) return i; if ((i = pci_save_pcix_state(dev)) != 0) @@ -1260,15 +1267,14 @@ void pci_pm_init(struct pci_dev *dev) /* find PCI PM capability in list */ pm = pci_find_capability(dev, PCI_CAP_ID_PM); if (!pm) - goto Exit; - + return; /* Check device's ability to generate PME# */ pci_read_config_word(dev, pm + PCI_PM_PMC, &pmc); if ((pmc & PCI_PM_CAP_VER_MASK) > 3) { dev_err(&dev->dev, "unsupported PM cap regs version (%u)\n", pmc & PCI_PM_CAP_VER_MASK); - goto Exit; + return; } dev->pm_cap = pm; @@ -1307,9 +1313,6 @@ void pci_pm_init(struct pci_dev *dev) } else { dev->pme_support = 0; } - - Exit: - pci_update_current_state(dev, PCI_D0); } /** @@ -1378,6 +1381,50 @@ void pci_allocate_cap_save_buffers(struct pci_dev *dev) } /** + * pci_restore_standard_config - restore standard config registers of PCI device + * @dev: PCI device to handle + * + * This function assumes that the device's configuration space is accessible. + * If the device needs to be powered up, the function will wait for it to + * change the state. + */ +int pci_restore_standard_config(struct pci_dev *dev) +{ + pci_power_t prev_state; + int error; + + pci_update_current_state(dev, PCI_D0); + + prev_state = dev->current_state; + if (prev_state == PCI_D0) + goto Restore; + + error = pci_raw_set_power_state(dev, PCI_D0, false); + if (error) + return error; + + /* + * This assumes that we won't get a bus in B2 or B3 from the BIOS, but + * we've made this assumption forever and it appears to be universally + * satisfied. + */ + switch(prev_state) { + case PCI_D3cold: + case PCI_D3hot: + mdelay(pci_pm_d3_delay); + break; + case PCI_D2: + udelay(PCI_PM_D2_DELAY); + break; + } + + dev->current_state = PCI_D0; + + Restore: + return pci_restore_state(dev); +} + +/** * pci_enable_ari - enable ARI forwarding if hardware support it * @dev: the PCI device */ |