summaryrefslogtreecommitdiffstats
path: root/drivers/rtc/rtc-rs5c372.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/rtc/rtc-rs5c372.c')
-rw-r--r--drivers/rtc/rtc-rs5c372.c48
1 files changed, 8 insertions, 40 deletions
diff --git a/drivers/rtc/rtc-rs5c372.c b/drivers/rtc/rtc-rs5c372.c
index dd14e202c2c..85c1b848dd7 100644
--- a/drivers/rtc/rtc-rs5c372.c
+++ b/drivers/rtc/rtc-rs5c372.c
@@ -281,10 +281,8 @@ static int rs5c372_rtc_set_time(struct device *dev, struct rtc_time *tm)
return rs5c372_set_datetime(to_i2c_client(dev), tm);
}
-#if defined(CONFIG_RTC_INTF_DEV) || defined(CONFIG_RTC_INTF_DEV_MODULE)
-static int
-rs5c_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
+static int rs5c_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
{
struct i2c_client *client = to_i2c_client(dev);
struct rs5c372 *rs5c = i2c_get_clientdata(client);
@@ -292,45 +290,19 @@ rs5c_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
int status, addr;
buf = rs5c->regs[RS5C_REG_CTRL1];
- switch (cmd) {
- case RTC_UIE_OFF:
- case RTC_UIE_ON:
- /* some 327a modes use a different IRQ pin for 1Hz irqs */
- if (rs5c->type == rtc_rs5c372a
- && (buf & RS5C372A_CTRL1_SL1))
- return -ENOIOCTLCMD;
- case RTC_AIE_OFF:
- case RTC_AIE_ON:
- /* these irq management calls only make sense for chips
- * which are wired up to an IRQ.
- */
- if (!rs5c->has_irq)
- return -ENOIOCTLCMD;
- break;
- default:
- return -ENOIOCTLCMD;
- }
+
+ if (!rs5c->has_irq)
+ return -EINVAL;
status = rs5c_get_regs(rs5c);
if (status < 0)
return status;
addr = RS5C_ADDR(RS5C_REG_CTRL1);
- switch (cmd) {
- case RTC_AIE_OFF: /* alarm off */
- buf &= ~RS5C_CTRL1_AALE;
- break;
- case RTC_AIE_ON: /* alarm on */
+ if (enabled)
buf |= RS5C_CTRL1_AALE;
- break;
- case RTC_UIE_OFF: /* update off */
- buf &= ~RS5C_CTRL1_CT_MASK;
- break;
- case RTC_UIE_ON: /* update on */
- buf &= ~RS5C_CTRL1_CT_MASK;
- buf |= RS5C_CTRL1_CT4;
- break;
- }
+ else
+ buf &= ~RS5C_CTRL1_AALE;
if (i2c_smbus_write_byte_data(client, addr, buf) < 0) {
printk(KERN_WARNING "%s: can't update alarm\n",
@@ -342,10 +314,6 @@ rs5c_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
return status;
}
-#else
-#define rs5c_rtc_ioctl NULL
-#endif
-
/* NOTE: Since RTC_WKALM_{RD,SET} were originally defined for EFI,
* which only exposes a polled programming interface; and since
@@ -461,11 +429,11 @@ static int rs5c372_rtc_proc(struct device *dev, struct seq_file *seq)
static const struct rtc_class_ops rs5c372_rtc_ops = {
.proc = rs5c372_rtc_proc,
- .ioctl = rs5c_rtc_ioctl,
.read_time = rs5c372_rtc_read_time,
.set_time = rs5c372_rtc_set_time,
.read_alarm = rs5c_read_alarm,
.set_alarm = rs5c_set_alarm,
+ .alarm_irq_enable = rs5c_rtc_alarm_irq_enable,
};
#if defined(CONFIG_RTC_INTF_SYSFS) || defined(CONFIG_RTC_INTF_SYSFS_MODULE)