diff options
Diffstat (limited to 'drivers/scsi/aacraid/aacraid.h')
| -rw-r--r-- | drivers/scsi/aacraid/aacraid.h | 79 |
1 files changed, 61 insertions, 18 deletions
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index 3fcf62724fa..9e933a88a8b 100644 --- a/drivers/scsi/aacraid/aacraid.h +++ b/drivers/scsi/aacraid/aacraid.h @@ -12,7 +12,7 @@ *----------------------------------------------------------------------------*/ #ifndef AAC_DRIVER_BUILD -# define AAC_DRIVER_BUILD 28900 +# define AAC_DRIVER_BUILD 29800 # define AAC_DRIVER_BRANCH "-ms" #endif #define MAXIMUM_NUM_CONTAINERS 32 @@ -100,6 +100,13 @@ struct user_sgentryraw { u32 flags; /* reserved for F/W use */ }; +struct sge_ieee1212 { + u32 addrLow; + u32 addrHigh; + u32 length; + u32 flags; +}; + /* * SGMAP * @@ -270,6 +277,8 @@ enum aac_queue_types { */ #define FIB_MAGIC 0x0001 +#define FIB_MAGIC2 0x0004 +#define FIB_MAGIC2_64 0x0005 /* * Define the priority levels the FSA communication routines support. @@ -296,22 +305,20 @@ struct aac_fibhdr { __le32 XferState; /* Current transfer state for this CCB */ __le16 Command; /* Routing information for the destination */ u8 StructType; /* Type FIB */ - u8 Flags; /* Flags for FIB */ + u8 Unused; /* Unused */ __le16 Size; /* Size of this FIB in bytes */ __le16 SenderSize; /* Size of the FIB in the sender (for response sizing) */ __le32 SenderFibAddress; /* Host defined data in the FIB */ - __le32 ReceiverFibAddress;/* Logical address of this FIB for - the adapter */ - u32 SenderData; /* Place holder for the sender to store data */ union { - struct { - __le32 _ReceiverTimeStart; /* Timestamp for - receipt of fib */ - __le32 _ReceiverTimeDone; /* Timestamp for - completion of fib */ - } _s; - } _u; + __le32 ReceiverFibAddress;/* Logical address of this FIB for + the adapter (old) */ + __le32 SenderFibAddressHigh;/* upper 32bit of phys. FIB address */ + __le32 TimeStamp; /* otherwise timestamp for FW internal use */ + } u; + u32 Handle; /* FIB handle used for MSGU commnunication */ + u32 Previous; /* FW internal use */ + u32 Next; /* FW internal use */ }; struct hw_fib { @@ -361,6 +368,7 @@ struct hw_fib { #define ContainerCommand 500 #define ContainerCommand64 501 #define ContainerRawIo 502 +#define ContainerRawIo2 503 /* * Scsi Port commands (scsi passthrough) */ @@ -417,6 +425,7 @@ enum fib_xfer_state { #define ADAPTER_INIT_STRUCT_REVISION 3 #define ADAPTER_INIT_STRUCT_REVISION_4 4 // rocket science #define ADAPTER_INIT_STRUCT_REVISION_6 6 /* PMC src */ +#define ADAPTER_INIT_STRUCT_REVISION_7 7 /* Denali */ struct aac_init { @@ -441,7 +450,9 @@ struct aac_init #define INITFLAGS_NEW_COMM_SUPPORTED 0x00000001 #define INITFLAGS_DRIVER_USES_UTC_TIME 0x00000010 #define INITFLAGS_DRIVER_SUPPORTS_PM 0x00000020 -#define INITFLAGS_NEW_COMM_TYPE1_SUPPORTED 0x00000041 +#define INITFLAGS_NEW_COMM_TYPE1_SUPPORTED 0x00000040 +#define INITFLAGS_FAST_JBOD_SUPPORTED 0x00000080 +#define INITFLAGS_NEW_COMM_TYPE2_SUPPORTED 0x00000100 __le32 MaxIoCommands; /* max outstanding commands */ __le32 MaxIoSize; /* largest I/O command */ __le32 MaxFibSize; /* largest FIB to adapter */ @@ -1052,10 +1063,11 @@ struct aac_dev struct adapter_ops a_ops; unsigned long fsrev; /* Main driver's revision number */ - unsigned long dbg_base; /* address of UART + resource_size_t base_start; /* main IO base */ + resource_size_t dbg_base; /* address of UART * debug buffer */ - unsigned base_size, dbg_size; /* Size of + resource_size_t base_size, dbg_size; /* Size of * mapped in region */ struct aac_init *init; /* Holds initialization info to communicate with adapter */ @@ -1123,6 +1135,7 @@ struct aac_dev # define AAC_COMM_PRODUCER 0 # define AAC_COMM_MESSAGE 1 # define AAC_COMM_MESSAGE_TYPE1 3 +# define AAC_COMM_MESSAGE_TYPE2 4 u8 raw_io_interface; u8 raw_io_64; u8 printf_enabled; @@ -1181,6 +1194,7 @@ struct aac_dev #define FIB_CONTEXT_FLAG_TIMED_OUT (0x00000001) #define FIB_CONTEXT_FLAG (0x00000002) #define FIB_CONTEXT_FLAG_WAIT (0x00000004) +#define FIB_CONTEXT_FLAG_FASTRESP (0x00000008) /* * Define the command values @@ -1287,6 +1301,22 @@ struct aac_dev #define CMDATA_SYNCH 4 #define CMUNSTABLE 5 +#define RIO_TYPE_WRITE 0x0000 +#define RIO_TYPE_READ 0x0001 +#define RIO_SUREWRITE 0x0008 + +#define RIO2_IO_TYPE 0x0003 +#define RIO2_IO_TYPE_WRITE 0x0000 +#define RIO2_IO_TYPE_READ 0x0001 +#define RIO2_IO_TYPE_VERIFY 0x0002 +#define RIO2_IO_ERROR 0x0004 +#define RIO2_IO_SUREWRITE 0x0008 +#define RIO2_SGL_CONFORMANT 0x0010 +#define RIO2_SG_FORMAT 0xF000 +#define RIO2_SG_FORMAT_ARC 0x0000 +#define RIO2_SG_FORMAT_SRL 0x1000 +#define RIO2_SG_FORMAT_IEEE1212 0x2000 + struct aac_read { __le32 command; @@ -1331,9 +1361,6 @@ struct aac_write64 __le32 block; __le16 pad; __le16 flags; -#define IO_TYPE_WRITE 0x00000000 -#define IO_TYPE_READ 0x00000001 -#define IO_SUREWRITE 0x00000008 struct sgmap64 sg; // Must be last in struct because it is variable }; struct aac_write_reply @@ -1354,6 +1381,22 @@ struct aac_raw_io struct sgmapraw sg; }; +struct aac_raw_io2 { + __le32 blockLow; + __le32 blockHigh; + __le32 byteCount; + __le16 cid; + __le16 flags; /* RIO2 flags */ + __le32 sgeFirstSize; /* size of first sge el. */ + __le32 sgeNominalSize; /* size of 2nd sge el. (if conformant) */ + u8 sgeCnt; /* only 8 bits required */ + u8 bpTotal; /* reserved for F/W use */ + u8 bpComplete; /* reserved for F/W use */ + u8 sgeFirstIndex; /* reserved for F/W use */ + u8 unused[4]; + struct sge_ieee1212 sge[1]; +}; + #define CT_FLUSH_CACHE 129 struct aac_synchronize { __le32 command; /* VM_ContainerConfig */ |