diff options
Diffstat (limited to 'drivers/scsi/mpt2sas/mpt2sas_base.c')
| -rw-r--r-- | drivers/scsi/mpt2sas/mpt2sas_base.c | 59 |
1 files changed, 30 insertions, 29 deletions
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index bcb23d28b3e..ccd6d5a97ec 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -80,10 +80,6 @@ static int msix_disable = -1; module_param(msix_disable, int, 0); MODULE_PARM_DESC(msix_disable, " disable msix routed interrupts (default=0)"); -static int missing_delay[2] = {-1, -1}; -module_param_array(missing_delay, int, NULL, 0); -MODULE_PARM_DESC(missing_delay, " device missing delay , io missing delay"); - static int mpt2sas_fwfault_debug; MODULE_PARM_DESC(mpt2sas_fwfault_debug, " enable detection of firmware fault " "and halt firmware - (default=0)"); @@ -2199,7 +2195,7 @@ _base_display_ioc_capabilities(struct MPT2SAS_ADAPTER *ioc) } /** - * _base_update_missing_delay - change the missing delay timers + * mpt2sas_base_update_missing_delay - change the missing delay timers * @ioc: per adapter object * @device_missing_delay: amount of time till device is reported missing * @io_missing_delay: interval IO is returned when there is a missing device @@ -2210,8 +2206,8 @@ _base_display_ioc_capabilities(struct MPT2SAS_ADAPTER *ioc) * delay, as well as the io missing delay. This should be called at driver * load time. */ -static void -_base_update_missing_delay(struct MPT2SAS_ADAPTER *ioc, +void +mpt2sas_base_update_missing_delay(struct MPT2SAS_ADAPTER *ioc, u16 device_missing_delay, u8 io_missing_delay) { u16 dmd, dmd_new, dmd_orignal; @@ -2507,23 +2503,25 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) /* reply free queue sizing - taking into account for 64 FW events */ ioc->reply_free_queue_depth = ioc->hba_queue_depth + 64; + /* calculate reply descriptor post queue depth */ + ioc->reply_post_queue_depth = ioc->hba_queue_depth + + ioc->reply_free_queue_depth + 1; /* align the reply post queue on the next 16 count boundary */ - if (!ioc->reply_free_queue_depth % 16) - ioc->reply_post_queue_depth = ioc->reply_free_queue_depth + 16; - else - ioc->reply_post_queue_depth = ioc->reply_free_queue_depth + - 32 - (ioc->reply_free_queue_depth % 16); + if (ioc->reply_post_queue_depth % 16) + ioc->reply_post_queue_depth += 16 - + (ioc->reply_post_queue_depth % 16); + + if (ioc->reply_post_queue_depth > facts->MaxReplyDescriptorPostQueueDepth) { - ioc->reply_post_queue_depth = min_t(u16, - (facts->MaxReplyDescriptorPostQueueDepth - - (facts->MaxReplyDescriptorPostQueueDepth % 16)), - (ioc->hba_queue_depth - (ioc->hba_queue_depth % 16))); - ioc->reply_free_queue_depth = ioc->reply_post_queue_depth - 16; - ioc->hba_queue_depth = ioc->reply_free_queue_depth - 64; + ioc->reply_post_queue_depth = + facts->MaxReplyDescriptorPostQueueDepth - + (facts->MaxReplyDescriptorPostQueueDepth % 16); + ioc->hba_queue_depth = + ((ioc->reply_post_queue_depth - 64) / 2) - 1; + ioc->reply_free_queue_depth = ioc->hba_queue_depth + 64; } - dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scatter gather: " "sge_in_main_msg(%d), sge_per_chain(%d), sge_per_io(%d), " "chains_per_io(%d)\n", ioc->name, ioc->max_sges_in_main_message, @@ -3940,11 +3938,15 @@ _base_diag_reset(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) writel(host_diagnostic | MPI2_DIAG_RESET_ADAPTER, &ioc->chip->HostDiagnostic); - /* don't access any registers for 50 milliseconds */ - msleep(50); + /* This delay allows the chip PCIe hardware time to finish reset tasks*/ + if (sleep_flag == CAN_SLEEP) + msleep(MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC/1000); + else + mdelay(MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC/1000); - /* 300 second max wait */ - for (count = 0; count < 3000000 ; count++) { + /* Approximately 300 second max wait */ + for (count = 0; count < (300000000 / + MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC); count++) { host_diagnostic = readl(&ioc->chip->HostDiagnostic); @@ -3953,11 +3955,13 @@ _base_diag_reset(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) if (!(host_diagnostic & MPI2_DIAG_RESET_ADAPTER)) break; - /* wait 100 msec */ + /* Wait to pass the second read delay window */ if (sleep_flag == CAN_SLEEP) - msleep(1); + msleep(MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC + /1000); else - mdelay(1); + mdelay(MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC + /1000); } if (host_diagnostic & MPI2_DIAG_HCB_MODE) { @@ -4407,9 +4411,6 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc) if (r) goto out_free_resources; - if (missing_delay[0] != -1 && missing_delay[1] != -1) - _base_update_missing_delay(ioc, missing_delay[0], - missing_delay[1]); ioc->non_operational_loop = 0; return 0; |