summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/qla2xxx
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/qla2xxx')
-rw-r--r--drivers/scsi/qla2xxx/qla_bsg.c196
-rw-r--r--drivers/scsi/qla2xxx/qla_bsg.h7
-rw-r--r--drivers/scsi/qla2xxx/qla_def.h4
-rw-r--r--drivers/scsi/qla2xxx/qla_gbl.h5
-rw-r--r--drivers/scsi/qla2xxx/qla_isr.c7
-rw-r--r--drivers/scsi/qla2xxx/qla_mbx.c66
-rw-r--r--drivers/scsi/qla2xxx/qla_os.c1
7 files changed, 269 insertions, 17 deletions
diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c
index b905dfe5ea6..3a024838850 100644
--- a/drivers/scsi/qla2xxx/qla_bsg.c
+++ b/drivers/scsi/qla2xxx/qla_bsg.c
@@ -483,6 +483,98 @@ done:
return rval;
}
+/* Set the port configuration to enable the
+ * internal loopback on ISP81XX
+ */
+static inline int
+qla81xx_set_internal_loopback(scsi_qla_host_t *vha, uint16_t *config,
+ uint16_t *new_config)
+{
+ int ret = 0;
+ int rval = 0;
+ struct qla_hw_data *ha = vha->hw;
+
+ if (!IS_QLA81XX(ha))
+ goto done_set_internal;
+
+ new_config[0] = config[0] | (ENABLE_INTERNAL_LOOPBACK << 1);
+ memcpy(&new_config[1], &config[1], sizeof(uint16_t) * 3) ;
+
+ ha->notify_dcbx_comp = 1;
+ ret = qla81xx_set_port_config(vha, new_config);
+ if (ret != QLA_SUCCESS) {
+ DEBUG2(printk(KERN_ERR
+ "%s(%lu): Set port config failed\n",
+ __func__, vha->host_no));
+ ha->notify_dcbx_comp = 0;
+ rval = -EINVAL;
+ goto done_set_internal;
+ }
+
+ /* Wait for DCBX complete event */
+ if (!wait_for_completion_timeout(&ha->dcbx_comp, (20 * HZ))) {
+ DEBUG2(qla_printk(KERN_WARNING, ha,
+ "State change notificaition not received.\n"));
+ } else
+ DEBUG2(qla_printk(KERN_INFO, ha,
+ "State change RECEIVED\n"));
+
+ ha->notify_dcbx_comp = 0;
+
+done_set_internal:
+ return rval;
+}
+
+/* Set the port configuration to disable the
+ * internal loopback on ISP81XX
+ */
+static inline int
+qla81xx_reset_internal_loopback(scsi_qla_host_t *vha, uint16_t *config,
+ int wait)
+{
+ int ret = 0;
+ int rval = 0;
+ uint16_t new_config[4];
+ struct qla_hw_data *ha = vha->hw;
+
+ if (!IS_QLA81XX(ha))
+ goto done_reset_internal;
+
+ memset(new_config, 0 , sizeof(new_config));
+ if ((config[0] & INTERNAL_LOOPBACK_MASK) >> 1 ==
+ ENABLE_INTERNAL_LOOPBACK) {
+ new_config[0] = config[0] & ~INTERNAL_LOOPBACK_MASK;
+ memcpy(&new_config[1], &config[1], sizeof(uint16_t) * 3) ;
+
+ ha->notify_dcbx_comp = wait;
+ ret = qla81xx_set_port_config(vha, new_config);
+ if (ret != QLA_SUCCESS) {
+ DEBUG2(printk(KERN_ERR
+ "%s(%lu): Set port config failed\n",
+ __func__, vha->host_no));
+ ha->notify_dcbx_comp = 0;
+ rval = -EINVAL;
+ goto done_reset_internal;
+ }
+
+ /* Wait for DCBX complete event */
+ if (wait && !wait_for_completion_timeout(&ha->dcbx_comp,
+ (20 * HZ))) {
+ DEBUG2(qla_printk(KERN_WARNING, ha,
+ "State change notificaition not received.\n"));
+ ha->notify_dcbx_comp = 0;
+ rval = -EINVAL;
+ goto done_reset_internal;
+ } else
+ DEBUG2(qla_printk(KERN_INFO, ha,
+ "State change RECEIVED\n"));
+
+ ha->notify_dcbx_comp = 0;
+ }
+done_reset_internal:
+ return rval;
+}
+
static int
qla2x00_process_loopback(struct fc_bsg_job *bsg_job)
{
@@ -494,6 +586,7 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job)
char *type;
struct msg_echo_lb elreq;
uint16_t response[MAILBOX_REGISTER_COUNT];
+ uint16_t config[4], new_config[4];
uint8_t *fw_sts_ptr;
uint8_t *req_data = NULL;
dma_addr_t req_data_dma;
@@ -568,29 +661,102 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job)
elreq.options = bsg_job->request->rqst_data.h_vendor.vendor_cmd[1];
- if (ha->current_topology != ISP_CFG_F) {
- type = "FC_BSG_HST_VENDOR_LOOPBACK";
+ if ((ha->current_topology == ISP_CFG_F ||
+ (IS_QLA81XX(ha) &&
+ le32_to_cpu(*(uint32_t *)req_data) == ELS_OPCODE_BYTE
+ && req_data_len == MAX_ELS_FRAME_PAYLOAD)) &&
+ elreq.options == EXTERNAL_LOOPBACK) {
+ type = "FC_BSG_HST_VENDOR_ECHO_DIAG";
DEBUG2(qla_printk(KERN_INFO, ha,
- "scsi(%ld) bsg rqst type: %s\n",
- vha->host_no, type));
-
- command_sent = INT_DEF_LB_LOOPBACK_CMD;
- rval = qla2x00_loopback_test(vha, &elreq, response);
+ "scsi(%ld) bsg rqst type: %s\n", vha->host_no, type));
+ command_sent = INT_DEF_LB_ECHO_CMD;
+ rval = qla2x00_echo_test(vha, &elreq, response);
+ } else {
if (IS_QLA81XX(ha)) {
+ memset(config, 0, sizeof(config));
+ memset(new_config, 0, sizeof(new_config));
+ if (qla81xx_get_port_config(vha, config)) {
+ DEBUG2(printk(KERN_ERR
+ "%s(%lu): Get port config failed\n",
+ __func__, vha->host_no));
+ bsg_job->reply->reply_payload_rcv_len = 0;
+ bsg_job->reply->result = (DID_ERROR << 16);
+ rval = -EPERM;
+ goto done_free_dma_req;
+ }
+
+ if (elreq.options != EXTERNAL_LOOPBACK) {
+ DEBUG2(qla_printk(KERN_INFO, ha,
+ "Internal: current port config = %x\n",
+ config[0]));
+ if (qla81xx_set_internal_loopback(vha, config,
+ new_config)) {
+ bsg_job->reply->reply_payload_rcv_len =
+ 0;
+ bsg_job->reply->result =
+ (DID_ERROR << 16);
+ rval = -EPERM;
+ goto done_free_dma_req;
+ }
+ } else {
+ /* For external loopback to work
+ * ensure internal loopback is disabled
+ */
+ if (qla81xx_reset_internal_loopback(vha,
+ config, 1)) {
+ bsg_job->reply->reply_payload_rcv_len =
+ 0;
+ bsg_job->reply->result =
+ (DID_ERROR << 16);
+ rval = -EPERM;
+ goto done_free_dma_req;
+ }
+ }
+
+ type = "FC_BSG_HST_VENDOR_LOOPBACK";
+ DEBUG2(qla_printk(KERN_INFO, ha,
+ "scsi(%ld) bsg rqst type: %s\n",
+ vha->host_no, type));
+
+ command_sent = INT_DEF_LB_LOOPBACK_CMD;
+ rval = qla2x00_loopback_test(vha, &elreq, response);
+
+ if (new_config[1]) {
+ /* Revert back to original port config
+ * Also clear internal loopback
+ */
+ qla81xx_reset_internal_loopback(vha,
+ new_config, 0);
+ }
+
if (response[0] == MBS_COMMAND_ERROR &&
- response[1] == MBS_LB_RESET) {
+ response[1] == MBS_LB_RESET) {
DEBUG2(printk(KERN_ERR "%s(%ld): ABORTing "
- "ISP\n", __func__, vha->host_no));
+ "ISP\n", __func__, vha->host_no));
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
qla2xxx_wake_dpc(vha);
+ qla2x00_wait_for_chip_reset(vha);
+ /* Also reset the MPI */
+ if (qla81xx_restart_mpi_firmware(vha) !=
+ QLA_SUCCESS) {
+ qla_printk(KERN_INFO, ha,
+ "MPI reset failed for host%ld.\n",
+ vha->host_no);
+ }
+
+ bsg_job->reply->reply_payload_rcv_len = 0;
+ bsg_job->reply->result = (DID_ERROR << 16);
+ rval = -EIO;
+ goto done_free_dma_req;
}
+ } else {
+ type = "FC_BSG_HST_VENDOR_LOOPBACK";
+ DEBUG2(qla_printk(KERN_INFO, ha,
+ "scsi(%ld) bsg rqst type: %s\n",
+ vha->host_no, type));
+ command_sent = INT_DEF_LB_LOOPBACK_CMD;
+ rval = qla2x00_loopback_test(vha, &elreq, response);
}
- } else {
- type = "FC_BSG_HST_VENDOR_ECHO_DIAG";
- DEBUG2(qla_printk(KERN_INFO, ha,
- "scsi(%ld) bsg rqst type: %s\n", vha->host_no, type));
- command_sent = INT_DEF_LB_ECHO_CMD;
- rval = qla2x00_echo_test(vha, &elreq, response);
}
if (rval) {
diff --git a/drivers/scsi/qla2xxx/qla_bsg.h b/drivers/scsi/qla2xxx/qla_bsg.h
index 76ed92dd2ef..1f096dabc01 100644
--- a/drivers/scsi/qla2xxx/qla_bsg.h
+++ b/drivers/scsi/qla2xxx/qla_bsg.h
@@ -19,6 +19,13 @@
#define INT_DEF_LB_LOOPBACK_CMD 0
#define INT_DEF_LB_ECHO_CMD 1
+/* Loopback related definations */
+#define EXTERNAL_LOOPBACK 0xF2
+#define ENABLE_INTERNAL_LOOPBACK 0x02
+#define INTERNAL_LOOPBACK_MASK 0x000E
+#define MAX_ELS_FRAME_PAYLOAD 252
+#define ELS_OPCODE_BYTE 0x10
+
/* BSG Vendor specific definations */
#define A84_ISSUE_WRITE_TYPE_CMD 0
#define A84_ISSUE_READ_TYPE_CMD 1
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index f8239bff092..2895855adc9 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -714,6 +714,8 @@ typedef struct {
#define MBC_SEND_RNFT_ELS 0x5e /* Send RNFT ELS request */
#define MBC_GET_LINK_PRIV_STATS 0x6d /* Get link & private data. */
#define MBC_SET_VENDOR_ID 0x76 /* Set Vendor ID. */
+#define MBC_SET_PORT_CONFIG 0x122 /* Set port configuration */
+#define MBC_GET_PORT_CONFIG 0x123 /* Get port configuration */
/* Firmware return data sizes */
#define FCAL_MAP_SIZE 128
@@ -2631,6 +2633,8 @@ struct qla_hw_data {
struct mutex vport_lock; /* Virtual port synchronization */
struct completion mbx_cmd_comp; /* Serialize mbx access */
struct completion mbx_intr_comp; /* Used for completion notification */
+ struct completion dcbx_comp; /* For set port config notification */
+ int notify_dcbx_comp;
/* Basic firmware related information. */
uint16_t fw_major_version;
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 2247ef8702e..7ae2ee42564 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -357,6 +357,11 @@ qla2x00_write_ram_word(scsi_qla_host_t *, uint32_t, uint32_t);
extern int qla2x00_get_data_rate(scsi_qla_host_t *);
extern int qla24xx_set_fcp_prio(scsi_qla_host_t *, uint16_t, uint16_t,
uint16_t *);
+extern int
+qla81xx_get_port_config(scsi_qla_host_t *, uint16_t *);
+
+extern int
+qla81xx_set_port_config(scsi_qla_host_t *, uint16_t *);
/*
* Global Function Prototypes in qla_isr.c source file.
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 912befdceb1..e51fc5f9fcd 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -545,10 +545,13 @@ skip_rio:
if (IS_QLA2100(ha))
break;
- if (IS_QLA8XXX_TYPE(ha))
+ if (IS_QLA8XXX_TYPE(ha)) {
DEBUG2(printk("scsi(%ld): DCBX Completed -- %04x %04x "
"%04x\n", vha->host_no, mb[1], mb[2], mb[3]));
- else
+ if (ha->notify_dcbx_comp)
+ complete(&ha->dcbx_comp);
+
+ } else
DEBUG2(printk("scsi(%ld): Asynchronous P2P MODE "
"received.\n", vha->host_no));
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 043f808ba3f..10f4815aec7 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -3950,6 +3950,72 @@ qla2x00_get_data_rate(scsi_qla_host_t *vha)
}
int
+qla81xx_get_port_config(scsi_qla_host_t *vha, uint16_t *mb)
+{
+ int rval;
+ mbx_cmd_t mc;
+ mbx_cmd_t *mcp = &mc;
+ struct qla_hw_data *ha = vha->hw;
+
+ DEBUG11(printk(KERN_INFO
+ "%s(%ld): entered.\n", __func__, vha->host_no));
+
+ if (!IS_QLA81XX(ha))
+ return QLA_FUNCTION_FAILED;
+ mcp->mb[0] = MBC_GET_PORT_CONFIG;
+ mcp->out_mb = MBX_0;
+ mcp->in_mb = MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
+ mcp->tov = MBX_TOV_SECONDS;
+ mcp->flags = 0;
+
+ rval = qla2x00_mailbox_command(vha, mcp);
+
+ if (rval != QLA_SUCCESS) {
+ DEBUG2_3_11(printk(KERN_WARNING
+ "%s(%ld): failed=%x (%x).\n", __func__,
+ vha->host_no, rval, mcp->mb[0]));
+ } else {
+ /* Copy all bits to preserve original value */
+ memcpy(mb, &mcp->mb[1], sizeof(uint16_t) * 4);
+
+ DEBUG11(printk(KERN_INFO
+ "%s(%ld): done.\n", __func__, vha->host_no));
+ }
+ return rval;
+}
+
+int
+qla81xx_set_port_config(scsi_qla_host_t *vha, uint16_t *mb)
+{
+ int rval;
+ mbx_cmd_t mc;
+ mbx_cmd_t *mcp = &mc;
+
+ DEBUG11(printk(KERN_INFO
+ "%s(%ld): entered.\n", __func__, vha->host_no));
+
+ mcp->mb[0] = MBC_SET_PORT_CONFIG;
+ /* Copy all bits to preserve original setting */
+ memcpy(&mcp->mb[1], mb, sizeof(uint16_t) * 4);
+ mcp->out_mb = MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
+ mcp->in_mb = MBX_0;
+ mcp->tov = MBX_TOV_SECONDS;
+ mcp->flags = 0;
+ rval = qla2x00_mailbox_command(vha, mcp);
+
+ if (rval != QLA_SUCCESS) {
+ DEBUG2_3_11(printk(KERN_WARNING
+ "%s(%ld): failed=%x (%x).\n", __func__,
+ vha->host_no, rval, mcp->mb[0]));
+ } else
+ DEBUG11(printk(KERN_INFO
+ "%s(%ld): done.\n", __func__, vha->host_no));
+
+ return rval;
+}
+
+
+int
qla24xx_set_fcp_prio(scsi_qla_host_t *vha, uint16_t loop_id, uint16_t priority,
uint16_t *mb)
{
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 9e656296b75..fa59181bcb0 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -2128,6 +2128,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
init_completion(&ha->mbx_cmd_comp);
complete(&ha->mbx_cmd_comp);
init_completion(&ha->mbx_intr_comp);
+ init_completion(&ha->dcbx_comp);
set_bit(0, (unsigned long *) ha->vp_idx_map);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-26 23:07:44 +0000