1 files changed, 224 insertions, 509 deletions

diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index b84c83456dc..6cc4358f68c 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -45,7 +45,7 @@
 
 #if defined(MODULE) && defined(SERIAL_DEBUG_MCOUNT)
 #define DBG_CNT(s) printk("(%s): [%x] refc=%d, serc=%d, ttyc=%d -> %s\n", \
- tty->name, (info->flags), serial_driver->refcount,info->count,tty->count,s)
+ tty->name, (info->tport.flags), serial_driver->refcount,info->count,tty->count,s)
 #else
 #define DBG_CNT(s)
 #endif
@@ -58,7 +58,6 @@
 
 #include <linux/types.h>
 #include <linux/serial.h>
-#include <linux/serialP.h>
 #include <linux/serial_reg.h>
 static char *serial_version = "4.30";
 
@@ -70,6 +69,7 @@ static char *serial_version = "4.30";
 #include <linux/interrupt.h>
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
+#include <linux/circ_buf.h>
 #include <linux/console.h>
 #include <linux/major.h>
 #include <linux/string.h>
@@ -85,13 +85,30 @@ static char *serial_version = "4.30";
 
 #include <asm/setup.h>
 
-#include <asm/system.h>
 
 #include <asm/irq.h>
 
 #include <asm/amigahw.h>
 #include <asm/amigaints.h>
 
+struct serial_state {
+	struct tty_port		tport;
+	struct circ_buf		xmit;
+	struct async_icount	icount;
+
+	unsigned long		port;
+	int			baud_base;
+	int			xmit_fifo_size;
+	int			custom_divisor;
+	int			read_status_mask;
+	int			ignore_status_mask;
+	int			timeout;
+	int			quot;
+	int			IER; 	/* Interrupt Enable Register */
+	int			MCR; 	/* Modem control register */
+	int			x_char;	/* xon/xoff character */
+};
+
 #define custom amiga_custom
 static char *serial_name = "Amiga-builtin serial driver";
 
@@ -100,11 +117,10 @@ static struct tty_driver *serial_driver;
 /* number of characters left in xmit buffer before we ask for more */
 #define WAKEUP_CHARS 256
 
-static struct async_struct *IRQ_ports;
-
 static unsigned char current_ctl_bits;
 
-static void change_speed(struct async_struct *info, struct ktermios *old);
+static void change_speed(struct tty_struct *tty, struct serial_state *info,
+		struct ktermios *old);
 static void rs_wait_until_sent(struct tty_struct *tty, int timeout);
 
 
@@ -117,7 +133,7 @@ static struct serial_state rs_table[1];
 #define serial_isroot()	(capable(CAP_SYS_ADMIN))
 
 
-static inline int serial_paranoia_check(struct async_struct *info,
+static inline int serial_paranoia_check(struct serial_state *info,
 					char *name, const char *routine)
 {
 #ifdef SERIAL_PARANOIA_CHECK
@@ -170,7 +186,7 @@ static __inline__ void rtsdtr_ctrl(int bits)
  */
 static void rs_stop(struct tty_struct *tty)
 {
-	struct async_struct *info = tty->driver_data;
+	struct serial_state *info = tty->driver_data;
 	unsigned long flags;
 
 	if (serial_paranoia_check(info, tty->name, "rs_stop"))
@@ -190,7 +206,7 @@ static void rs_stop(struct tty_struct *tty)
 
 static void rs_start(struct tty_struct *tty)
 {
-	struct async_struct *info = tty->driver_data;
+	struct serial_state *info = tty->driver_data;
 	unsigned long flags;
 
 	if (serial_paranoia_check(info, tty->name, "rs_start"))
@@ -231,27 +247,16 @@ static void rs_start(struct tty_struct *tty)
  * -----------------------------------------------------------------------
  */
 
-/*
- * This routine is used by the interrupt handler to schedule
- * processing in the software interrupt portion of the driver.
- */
-static void rs_sched_event(struct async_struct *info,
-			   int event)
-{
-	info->event |= 1 << event;
-	tasklet_schedule(&info->tlet);
-}
-
-static void receive_chars(struct async_struct *info)
+static void receive_chars(struct serial_state *info)
 {
         int status;
 	int serdatr;
-	struct tty_struct *tty = info->tty;
+	struct tty_struct *tty = info->tport.tty;
 	unsigned char ch, flag;
 	struct	async_icount *icount;
 	int oe = 0;
 
-	icount = &info->state->icount;
+	icount = &info->icount;
 
 	status = UART_LSR_DR; /* We obviously have a character! */
 	serdatr = custom.serdatr;
@@ -308,7 +313,7 @@ static void receive_chars(struct async_struct *info)
 	    printk("handling break....");
 #endif
 	    flag = TTY_BREAK;
-	    if (info->flags & ASYNC_SAK)
+	    if (info->tport.flags & ASYNC_SAK)
 	      do_SAK(tty);
 	  } else if (status & UART_LSR_PE)
 	    flag = TTY_PARITY;
@@ -331,20 +336,20 @@ out:
 	return;
 }
 
-static void transmit_chars(struct async_struct *info)
+static void transmit_chars(struct serial_state *info)
 {
 	custom.intreq = IF_TBE;
 	mb();
 	if (info->x_char) {
 	        custom.serdat = info->x_char | 0x100;
 		mb();
-		info->state->icount.tx++;
+		info->icount.tx++;
 		info->x_char = 0;
 		return;
 	}
 	if (info->xmit.head == info->xmit.tail
-	    || info->tty->stopped
-	    || info->tty->hw_stopped) {
+	    || info->tport.tty->stopped
+	    || info->tport.tty->hw_stopped) {
 		info->IER &= ~UART_IER_THRI;
 	        custom.intena = IF_TBE;
 		mb();
@@ -354,12 +359,12 @@ static void transmit_chars(struct async_struct *info)
 	custom.serdat = info->xmit.buf[info->xmit.tail++] | 0x100;
 	mb();
 	info->xmit.tail = info->xmit.tail & (SERIAL_XMIT_SIZE-1);
-	info->state->icount.tx++;
+	info->icount.tx++;
 
 	if (CIRC_CNT(info->xmit.head,
 		     info->xmit.tail,
 		     SERIAL_XMIT_SIZE) < WAKEUP_CHARS)
-		rs_sched_event(info, RS_EVENT_WRITE_WAKEUP);
+		tty_wakeup(info->tport.tty);
 
 #ifdef SERIAL_DEBUG_INTR
 	printk("THRE...");
@@ -371,8 +376,9 @@ static void transmit_chars(struct async_struct *info)
 	}
 }
 
-static void check_modem_status(struct async_struct *info)
+static void check_modem_status(struct serial_state *info)
 {
+	struct tty_port *port = &info->tport;
 	unsigned char status = ciab.pra & (SER_DCD | SER_CTS | SER_DSR);
 	unsigned char dstatus;
 	struct	async_icount *icount;
@@ -382,52 +388,52 @@ static void check_modem_status(struct async_struct *info)
 	current_ctl_bits = status;
 
 	if (dstatus) {
-		icount = &info->state->icount;
+		icount = &info->icount;
 		/* update input line counters */
 		if (dstatus & SER_DSR)
 			icount->dsr++;
 		if (dstatus & SER_DCD) {
 			icount->dcd++;
 #ifdef CONFIG_HARD_PPS
-			if ((info->flags & ASYNC_HARDPPS_CD) &&
+			if ((port->flags & ASYNC_HARDPPS_CD) &&
 			    !(status & SER_DCD))
 				hardpps();
 #endif
 		}
 		if (dstatus & SER_CTS)
 			icount->cts++;
-		wake_up_interruptible(&info->delta_msr_wait);
+		wake_up_interruptible(&port->delta_msr_wait);
 	}
 
-	if ((info->flags & ASYNC_CHECK_CD) && (dstatus & SER_DCD)) {
+	if ((port->flags & ASYNC_CHECK_CD) && (dstatus & SER_DCD)) {
 #if (defined(SERIAL_DEBUG_OPEN) || defined(SERIAL_DEBUG_INTR))
 		printk("ttyS%d CD now %s...", info->line,
 		       (!(status & SER_DCD)) ? "on" : "off");
 #endif
 		if (!(status & SER_DCD))
-			wake_up_interruptible(&info->open_wait);
+			wake_up_interruptible(&port->open_wait);
 		else {
 #ifdef SERIAL_DEBUG_OPEN
 			printk("doing serial hangup...");
 #endif
-			if (info->tty)
-				tty_hangup(info->tty);
+			if (port->tty)
+				tty_hangup(port->tty);
 		}
 	}
-	if (info->flags & ASYNC_CTS_FLOW) {
-		if (info->tty->hw_stopped) {
+	if (port->flags & ASYNC_CTS_FLOW) {
+		if (port->tty->hw_stopped) {
 			if (!(status & SER_CTS)) {
 #if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
 				printk("CTS tx start...");
 #endif
-				info->tty->hw_stopped = 0;
+				port->tty->hw_stopped = 0;
 				info->IER |= UART_IER_THRI;
 				custom.intena = IF_SETCLR | IF_TBE;
 				mb();
 				/* set a pending Tx Interrupt, transmitter should restart now */
 				custom.intreq = IF_SETCLR | IF_TBE;
 				mb();
-				rs_sched_event(info, RS_EVENT_WRITE_WAKEUP);
+				tty_wakeup(port->tty);
 				return;
 			}
 		} else {
@@ -435,7 +441,7 @@ static void check_modem_status(struct async_struct *info)
 #if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
 				printk("CTS tx stop...");
 #endif
-				info->tty->hw_stopped = 1;
+				port->tty->hw_stopped = 1;
 				info->IER &= ~UART_IER_THRI;
 				/* disable Tx interrupt and remove any pending interrupts */
 				custom.intena = IF_TBE;
@@ -450,7 +456,7 @@ static void check_modem_status(struct async_struct *info)
 static irqreturn_t ser_vbl_int( int irq, void *data)
 {
         /* vbl is just a periodic interrupt we tie into to update modem status */
-	struct async_struct * info = IRQ_ports;
+	struct serial_state *info = data;
 	/*
 	 * TBD - is it better to unregister from this interrupt or to
 	 * ignore it if MSI is clear ?
@@ -462,18 +468,16 @@ static irqreturn_t ser_vbl_int( int irq, void *data)
 
 static irqreturn_t ser_rx_int(int irq, void *dev_id)
 {
-	struct async_struct * info;
+	struct serial_state *info = dev_id;
 
 #ifdef SERIAL_DEBUG_INTR
 	printk("ser_rx_int...");
 #endif
 
-	info = IRQ_ports;
-	if (!info || !info->tty)
+	if (!info->tport.tty)
 		return IRQ_NONE;
 
 	receive_chars(info);
-	info->last_active = jiffies;
 #ifdef SERIAL_DEBUG_INTR
 	printk("end.\n");
 #endif
@@ -482,19 +486,17 @@ static irqreturn_t ser_rx_int(int irq, void *dev_id)
 
 static irqreturn_t ser_tx_int(int irq, void *dev_id)
 {
-	struct async_struct * info;
+	struct serial_state *info = dev_id;
 
 	if (custom.serdatr & SDR_TBE) {
 #ifdef SERIAL_DEBUG_INTR
 	  printk("ser_tx_int...");
 #endif
 
-	  info = IRQ_ports;
-	  if (!info || !info->tty)
+	  if (!info->tport.tty)
 		return IRQ_NONE;
 
 	  transmit_chars(info);
-	  info->last_active = jiffies;
 #ifdef SERIAL_DEBUG_INTR
 	  printk("end.\n");
 #endif
@@ -509,29 +511,6 @@ static irqreturn_t ser_tx_int(int irq, void *dev_id)
  */
 
 /*
- * This routine is used to handle the "bottom half" processing for the
- * serial driver, known also the "software interrupt" processing.
- * This processing is done at the kernel interrupt level, after the
- * rs_interrupt() has returned, BUT WITH INTERRUPTS TURNED ON.  This
- * is where time-consuming activities which can not be done in the
- * interrupt driver proper are done; the interrupt driver schedules
- * them using rs_sched_event(), and they get done here.
- */
-
-static void do_softint(unsigned long private_)
-{
-	struct async_struct	*info = (struct async_struct *) private_;
-	struct tty_struct	*tty;
-
-	tty = info->tty;
-	if (!tty)
-		return;
-
-	if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event))
-		tty_wakeup(tty);
-}
-
-/*
  * ---------------------------------------------------------------
  * Low level utility subroutines for the serial driver:  routines to
  * figure out the appropriate timeout for an interrupt chain, routines
@@ -540,8 +519,9 @@ static void do_softint(unsigned long private_)
  * ---------------------------------------------------------------
  */
 
-static int startup(struct async_struct * info)
+static int startup(struct tty_struct *tty, struct serial_state *info)
 {
+	struct tty_port *port = &info->tport;
 	unsigned long flags;
 	int	retval=0;
 	unsigned long page;
@@ -552,7 +532,7 @@ static int startup(struct async_struct * info)
 
 	local_irq_save(flags);
 
-	if (info->flags & ASYNC_INITIALIZED) {
+	if (port->flags & ASYNC_INITIALIZED) {
 		free_page(page);
 		goto errout;
 	}
@@ -574,9 +554,7 @@ static int startup(struct async_struct * info)
 	retval = request_irq(IRQ_AMIGA_VERTB, ser_vbl_int, 0, "serial status", info);
 	if (retval) {
 	  if (serial_isroot()) {
-	    if (info->tty)
-	      set_bit(TTY_IO_ERROR,
-		      &info->tty->flags);
+	      set_bit(TTY_IO_ERROR, &tty->flags);
 	    retval = 0;
 	  }
 	  goto errout;
@@ -590,37 +568,32 @@ static int startup(struct async_struct * info)
 	/* remember current state of the DCD and CTS bits */
 	current_ctl_bits = ciab.pra & (SER_DCD | SER_CTS | SER_DSR);
 
-	IRQ_ports = info;
-
 	info->MCR = 0;
-	if (info->tty->termios->c_cflag & CBAUD)
+	if (C_BAUD(tty))
 	  info->MCR = SER_DTR | SER_RTS;
 	rtsdtr_ctrl(info->MCR);
 
-	if (info->tty)
-		clear_bit(TTY_IO_ERROR, &info->tty->flags);
+	clear_bit(TTY_IO_ERROR, &tty->flags);
 	info->xmit.head = info->xmit.tail = 0;
 
 	/*
 	 * Set up the tty->alt_speed kludge
 	 */
-	if (info->tty) {
-		if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
-			info->tty->alt_speed = 57600;
-		if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
-			info->tty->alt_speed = 115200;
-		if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
-			info->tty->alt_speed = 230400;
-		if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
-			info->tty->alt_speed = 460800;
-	}
+	if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+		tty->alt_speed = 57600;
+	if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+		tty->alt_speed = 115200;
+	if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+		tty->alt_speed = 230400;
+	if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+		tty->alt_speed = 460800;
 
 	/*
 	 * and set the speed of the serial port
 	 */
-	change_speed(info, NULL);
+	change_speed(tty, info, NULL);
 
-	info->flags |= ASYNC_INITIALIZED;
+	port->flags |= ASYNC_INITIALIZED;
 	local_irq_restore(flags);
 	return 0;
 
@@ -633,15 +606,15 @@ errout:
  * This routine will shutdown a serial port; interrupts are disabled, and
  * DTR is dropped if the hangup on close termio flag is on.
  */
-static void shutdown(struct async_struct * info)
+static void shutdown(struct tty_struct *tty, struct serial_state *info)
 {
 	unsigned long	flags;
 	struct serial_state *state;
 
-	if (!(info->flags & ASYNC_INITIALIZED))
+	if (!(info->tport.flags & ASYNC_INITIALIZED))
 		return;
 
-	state = info->state;
+	state = info;
 
 #ifdef SERIAL_DEBUG_OPEN
 	printk("Shutting down serial port %d ....\n", info->line);
@@ -653,9 +626,7 @@ static void shutdown(struct async_struct * info)
 	 * clear delta_msr_wait queue to avoid mem leaks: we may free the irq
 	 * here so the queue might never be waken up
 	 */
-	wake_up_interruptible(&info->delta_msr_wait);
-
-	IRQ_ports = NULL;
+	wake_up_interruptible(&info->tport.delta_msr_wait);
 
 	/*
 	 * Free the IRQ, if necessary
@@ -675,14 +646,13 @@ static void shutdown(struct async_struct * info)
 	custom.adkcon = AC_UARTBRK;
 	mb();
 
-	if (!info->tty || (info->tty->termios->c_cflag & HUPCL))
+	if (tty->termios->c_cflag & HUPCL)
 		info->MCR &= ~(SER_DTR|SER_RTS);
 	rtsdtr_ctrl(info->MCR);
 
-	if (info->tty)
-		set_bit(TTY_IO_ERROR, &info->tty->flags);
+	set_bit(TTY_IO_ERROR, &tty->flags);
 
-	info->flags &= ~ASYNC_INITIALIZED;
+	info->tport.flags &= ~ASYNC_INITIALIZED;
 	local_irq_restore(flags);
 }
 
@@ -691,17 +661,16 @@ static void shutdown(struct async_struct * info)
  * This routine is called to set the UART divisor registers to match
  * the specified baud rate for a serial port.
  */
-static void change_speed(struct async_struct *info,
+static void change_speed(struct tty_struct *tty, struct serial_state *info,
 			 struct ktermios *old_termios)
 {
+	struct tty_port *port = &info->tport;
 	int	quot = 0, baud_base, baud;
 	unsigned cflag, cval = 0;
 	int	bits;
 	unsigned long	flags;
 
-	if (!info->tty || !info->tty->termios)
-		return;
-	cflag = info->tty->termios->c_cflag;
+	cflag = tty->termios->c_cflag;
 
 	/* Byte size is always 8 bits plus parity bit if requested */
 
@@ -722,13 +691,12 @@ static void change_speed(struct async_struct *info,
 #endif
 
 	/* Determine divisor based on baud rate */
-	baud = tty_get_baud_rate(info->tty);
+	baud = tty_get_baud_rate(tty);
 	if (!baud)
 		baud = 9600;	/* B0 transition handled in rs_set_termios */
-	baud_base = info->state->baud_base;
-	if (baud == 38400 &&
-	    ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST))
-		quot = info->state->custom_divisor;
+	baud_base = info->baud_base;
+	if (baud == 38400 && (port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)
+		quot = info->custom_divisor;
 	else {
 		if (baud == 134)
 			/* Special case since 134 is really 134.5 */
@@ -739,14 +707,14 @@ static void change_speed(struct async_struct *info,
 	/* If the quotient is zero refuse the change */
 	if (!quot && old_termios) {
 		/* FIXME: Will need updating for new tty in the end */
-		info->tty->termios->c_cflag &= ~CBAUD;
-		info->tty->termios->c_cflag |= (old_termios->c_cflag & CBAUD);
-		baud = tty_get_baud_rate(info->tty);
+		tty->termios->c_cflag &= ~CBAUD;
+		tty->termios->c_cflag |= (old_termios->c_cflag & CBAUD);
+		baud = tty_get_baud_rate(tty);
 		if (!baud)
 			baud = 9600;
 		if (baud == 38400 &&
-		    ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST))
-			quot = info->state->custom_divisor;
+		    (port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)
+			quot = info->custom_divisor;
 		else {
 			if (baud == 134)
 				/* Special case since 134 is really 134.5 */
@@ -764,17 +732,17 @@ static void change_speed(struct async_struct *info,
 
 	/* CTS flow control flag and modem status interrupts */
 	info->IER &= ~UART_IER_MSI;
-	if (info->flags & ASYNC_HARDPPS_CD)
+	if (port->flags & ASYNC_HARDPPS_CD)
 		info->IER |= UART_IER_MSI;
 	if (cflag & CRTSCTS) {
-		info->flags |= ASYNC_CTS_FLOW;
+		port->flags |= ASYNC_CTS_FLOW;
 		info->IER |= UART_IER_MSI;
 	} else
-		info->flags &= ~ASYNC_CTS_FLOW;
+		port->flags &= ~ASYNC_CTS_FLOW;
 	if (cflag & CLOCAL)
-		info->flags &= ~ASYNC_CHECK_CD;
+		port->flags &= ~ASYNC_CHECK_CD;
 	else {
-		info->flags |= ASYNC_CHECK_CD;
+		port->flags |= ASYNC_CHECK_CD;
 		info->IER |= UART_IER_MSI;
 	}
 	/* TBD:
@@ -786,24 +754,24 @@ static void change_speed(struct async_struct *info,
 	 */
 
 	info->read_status_mask = UART_LSR_OE | UART_LSR_DR;
-	if (I_INPCK(info->tty))
+	if (I_INPCK(tty))
 		info->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
-	if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
+	if (I_BRKINT(tty) || I_PARMRK(tty))
 		info->read_status_mask |= UART_LSR_BI;
 
 	/*
 	 * Characters to ignore
 	 */
 	info->ignore_status_mask = 0;
-	if (I_IGNPAR(info->tty))
+	if (I_IGNPAR(tty))
 		info->ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
-	if (I_IGNBRK(info->tty)) {
+	if (I_IGNBRK(tty)) {
 		info->ignore_status_mask |= UART_LSR_BI;
 		/*
 		 * If we're ignore parity and break indicators, ignore 
 		 * overruns too.  (For real raw support).
 		 */
-		if (I_IGNPAR(info->tty))
+		if (I_IGNPAR(tty))
 			info->ignore_status_mask |= UART_LSR_OE;
 	}
 	/*
@@ -828,13 +796,12 @@ static void change_speed(struct async_struct *info,
 	mb();
 	}
 
-	info->LCR = cval;				/* Save LCR */
 	local_irq_restore(flags);
 }
 
 static int rs_put_char(struct tty_struct *tty, unsigned char ch)
 {
-	struct async_struct *info;
+	struct serial_state *info;
 	unsigned long flags;
 
 	info = tty->driver_data;
@@ -861,7 +828,7 @@ static int rs_put_char(struct tty_struct *tty, unsigned char ch)
 
 static void rs_flush_chars(struct tty_struct *tty)
 {
-	struct async_struct *info = tty->driver_data;
+	struct serial_state *info = tty->driver_data;
 	unsigned long flags;
 
 	if (serial_paranoia_check(info, tty->name, "rs_flush_chars"))
@@ -886,11 +853,9 @@ static void rs_flush_chars(struct tty_struct *tty)
 static int rs_write(struct tty_struct * tty, const unsigned char *buf, int count)
 {
 	int	c, ret = 0;
-	struct async_struct *info;
+	struct serial_state *info = tty->driver_data;
 	unsigned long flags;
 
-	info = tty->driver_data;
-
 	if (serial_paranoia_check(info, tty->name, "rs_write"))
 		return 0;
 
@@ -934,7 +899,7 @@ static int rs_write(struct tty_struct * tty, const unsigned char *buf, int count
 
 static int rs_write_room(struct tty_struct *tty)
 {
-	struct async_struct *info = tty->driver_data;
+	struct serial_state *info = tty->driver_data;
 
 	if (serial_paranoia_check(info, tty->name, "rs_write_room"))
 		return 0;
@@ -943,7 +908,7 @@ static int rs_write_room(struct tty_struct *tty)
 
 static int rs_chars_in_buffer(struct tty_struct *tty)
 {
-	struct async_struct *info = tty->driver_data;
+	struct serial_state *info = tty->driver_data;
 
 	if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer"))
 		return 0;
@@ -952,7 +917,7 @@ static int rs_chars_in_buffer(struct tty_struct *tty)
 
 static void rs_flush_buffer(struct tty_struct *tty)
 {
-	struct async_struct *info = tty->driver_data;
+	struct serial_state *info = tty->driver_data;
 	unsigned long flags;
 
 	if (serial_paranoia_check(info, tty->name, "rs_flush_buffer"))
@@ -969,7 +934,7 @@ static void rs_flush_buffer(struct tty_struct *tty)
  */
 static void rs_send_xchar(struct tty_struct *tty, char ch)
 {
-	struct async_struct *info = tty->driver_data;
+	struct serial_state *info = tty->driver_data;
         unsigned long flags;
 
 	if (serial_paranoia_check(info, tty->name, "rs_send_char"))
@@ -1004,7 +969,7 @@ static void rs_send_xchar(struct tty_struct *tty, char ch)
  */
 static void rs_throttle(struct tty_struct * tty)
 {
-	struct async_struct *info = tty->driver_data;
+	struct serial_state *info = tty->driver_data;
 	unsigned long flags;
 #ifdef SERIAL_DEBUG_THROTTLE
 	char	buf[64];
@@ -1029,7 +994,7 @@ static void rs_throttle(struct tty_struct * tty)
 
 static void rs_unthrottle(struct tty_struct * tty)
 {
-	struct async_struct *info = tty->driver_data;
+	struct serial_state *info = tty->driver_data;
 	unsigned long flags;
 #ifdef SERIAL_DEBUG_THROTTLE
 	char	buf[64];
@@ -1060,25 +1025,22 @@ static void rs_unthrottle(struct tty_struct * tty)
  * ------------------------------------------------------------
  */
 
-static int get_serial_info(struct async_struct * info,
+static int get_serial_info(struct tty_struct *tty, struct serial_state *state,
 			   struct serial_struct __user * retinfo)
 {
 	struct serial_struct tmp;
-	struct serial_state *state = info->state;
    
 	if (!retinfo)
 		return -EFAULT;
 	memset(&tmp, 0, sizeof(tmp));
 	tty_lock();
-	tmp.type = state->type;
-	tmp.line = state->line;
+	tmp.line = tty->index;
 	tmp.port = state->port;
-	tmp.irq = state->irq;
-	tmp.flags = state->flags;
+	tmp.flags = state->tport.flags;
 	tmp.xmit_fifo_size = state->xmit_fifo_size;
 	tmp.baud_base = state->baud_base;
-	tmp.close_delay = state->close_delay;
-	tmp.closing_wait = state->closing_wait;
+	tmp.close_delay = state->tport.close_delay;
+	tmp.closing_wait = state->tport.closing_wait;
 	tmp.custom_divisor = state->custom_divisor;
 	tty_unlock();
 	if (copy_to_user(retinfo,&tmp,sizeof(*retinfo)))
@@ -1086,38 +1048,36 @@ static int get_serial_info(struct async_struct * info,
 	return 0;
 }
 
-static int set_serial_info(struct async_struct * info,
+static int set_serial_info(struct tty_struct *tty, struct serial_state *state,
 			   struct serial_struct __user * new_info)
 {
+	struct tty_port *port = &state->tport;
 	struct serial_struct new_serial;
- 	struct serial_state old_state, *state;
-	unsigned int		change_irq,change_port;
+	bool change_spd;
 	int 			retval = 0;
 
 	if (copy_from_user(&new_serial,new_info,sizeof(new_serial)))
 		return -EFAULT;
 
 	tty_lock();
-	state = info->state;
-	old_state = *state;
-  
-	change_irq = new_serial.irq != state->irq;
-	change_port = (new_serial.port != state->port);
-	if(change_irq || change_port || (new_serial.xmit_fifo_size != state->xmit_fifo_size)) {
-	  tty_unlock();
-	  return -EINVAL;
+	change_spd = ((new_serial.flags ^ port->flags) & ASYNC_SPD_MASK) ||
+		new_serial.custom_divisor != state->custom_divisor;
+	if (new_serial.irq || new_serial.port != state->port ||
+			new_serial.xmit_fifo_size != state->xmit_fifo_size) {
+		tty_unlock();
+		return -EINVAL;
 	}
   
 	if (!serial_isroot()) {
 		if ((new_serial.baud_base != state->baud_base) ||
-		    (new_serial.close_delay != state->close_delay) ||
+		    (new_serial.close_delay != port->close_delay) ||
 		    (new_serial.xmit_fifo_size != state->xmit_fifo_size) ||
 		    ((new_serial.flags & ~ASYNC_USR_MASK) !=
-		     (state->flags & ~ASYNC_USR_MASK)))
+		     (port->flags & ~ASYNC_USR_MASK))) {
+			tty_unlock();
 			return -EPERM;
-		state->flags = ((state->flags & ~ASYNC_USR_MASK) |
-			       (new_serial.flags & ASYNC_USR_MASK));
-		info->flags = ((info->flags & ~ASYNC_USR_MASK) |
+		}
+		port->flags = ((port->flags & ~ASYNC_USR_MASK) |
 			       (new_serial.flags & ASYNC_USR_MASK));
 		state->custom_divisor = new_serial.custom_divisor;
 		goto check_and_exit;
@@ -1134,32 +1094,28 @@ static int set_serial_info(struct async_struct * info,
 	 */
 
 	state->baud_base = new_serial.baud_base;
-	state->flags = ((state->flags & ~ASYNC_FLAGS) |
+	port->flags = ((port->flags & ~ASYNC_FLAGS) |
 			(new_serial.flags & ASYNC_FLAGS));
-	info->flags = ((state->flags & ~ASYNC_INTERNAL_FLAGS) |
-		       (info->flags & ASYNC_INTERNAL_FLAGS));
 	state->custom_divisor = new_serial.custom_divisor;
-	state->close_delay = new_serial.close_delay * HZ/100;
-	state->closing_wait = new_serial.closing_wait * HZ/100;
-	info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+	port->close_delay = new_serial.close_delay * HZ/100;
+	port->closing_wait = new_serial.closing_wait * HZ/100;
+	tty->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 
 check_and_exit:
-	if (info->flags & ASYNC_INITIALIZED) {
-		if (((old_state.flags & ASYNC_SPD_MASK) !=
-		     (state->flags & ASYNC_SPD_MASK)) ||
-		    (old_state.custom_divisor != state->custom_divisor)) {
-			if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
-				info->tty->alt_speed = 57600;
-			if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
-				info->tty->alt_speed = 115200;
-			if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
-				info->tty->alt_speed = 230400;
-			if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
-				info->tty->alt_speed = 460800;
-			change_speed(info, NULL);
+	if (port->flags & ASYNC_INITIALIZED) {
+		if (change_spd) {
+			if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+				tty->alt_speed = 57600;
+			if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+				tty->alt_speed = 115200;
+			if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+				tty->alt_speed = 230400;
+			if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+				tty->alt_speed = 460800;
+			change_speed(tty, state, NULL);
 		}
 	} else
-		retval = startup(info);
+		retval = startup(tty, state);
 	tty_unlock();
 	return retval;
 }
@@ -1175,7 +1131,7 @@ check_and_exit:
  * 	    transmit holding register is empty.  This functionality
  * 	    allows an RS485 driver to be written in user space. 
  */
-static int get_lsr_info(struct async_struct * info, unsigned int __user *value)
+static int get_lsr_info(struct serial_state *info, unsigned int __user *value)
 {
 	unsigned char status;
 	unsigned int result;
@@ -1194,7 +1150,7 @@ static int get_lsr_info(struct async_struct * info, unsigned int __user *value)
 
 static int rs_tiocmget(struct tty_struct *tty)
 {
-	struct async_struct * info = tty->driver_data;
+	struct serial_state *info = tty->driver_data;
 	unsigned char control, status;
 	unsigned long flags;
 
@@ -1217,7 +1173,7 @@ static int rs_tiocmget(struct tty_struct *tty)
 static int rs_tiocmset(struct tty_struct *tty, unsigned int set,
 						unsigned int clear)
 {
-	struct async_struct * info = tty->driver_data;
+	struct serial_state *info = tty->driver_data;
 	unsigned long flags;
 
 	if (serial_paranoia_check(info, tty->name, "rs_ioctl"))
@@ -1244,7 +1200,7 @@ static int rs_tiocmset(struct tty_struct *tty, unsigned int set,
  */
 static int rs_break(struct tty_struct *tty, int break_state)
 {
-	struct async_struct * info = tty->driver_data;
+	struct serial_state *info = tty->driver_data;
 	unsigned long flags;
 
 	if (serial_paranoia_check(info, tty->name, "rs_break"))
@@ -1269,12 +1225,12 @@ static int rs_break(struct tty_struct *tty, int break_state)
 static int rs_get_icount(struct tty_struct *tty,
 				struct serial_icounter_struct *icount)
 {
-	struct async_struct *info = tty->driver_data;
+	struct serial_state *info = tty->driver_data;
 	struct async_icount cnow;
 	unsigned long flags;
 
 	local_irq_save(flags);
-	cnow = info->state->icount;
+	cnow = info->icount;
 	local_irq_restore(flags);
 	icount->cts = cnow.cts;
 	icount->dsr = cnow.dsr;
@@ -1294,7 +1250,7 @@ static int rs_get_icount(struct tty_struct *tty,
 static int rs_ioctl(struct tty_struct *tty,
 		    unsigned int cmd, unsigned long arg)
 {
-	struct async_struct * info = tty->driver_data;
+	struct serial_state *info = tty->driver_data;
 	struct async_icount cprev, cnow;	/* kernel counter temps */
 	void __user *argp = (void __user *)arg;
 	unsigned long flags;
@@ -1311,9 +1267,9 @@ static int rs_ioctl(struct tty_struct *tty,
 
 	switch (cmd) {
 		case TIOCGSERIAL:
-			return get_serial_info(info, argp);
+			return get_serial_info(tty, info, argp);
 		case TIOCSSERIAL:
-			return set_serial_info(info, argp);
+			return set_serial_info(tty, info, argp);
 		case TIOCSERCONFIG:
 			return 0;
 
@@ -1322,7 +1278,7 @@ static int rs_ioctl(struct tty_struct *tty,
 
 		case TIOCSERGSTRUCT:
 			if (copy_to_user(argp,
-					 info, sizeof(struct async_struct)))
+					 info, sizeof(struct serial_state)))
 				return -EFAULT;
 			return 0;
 
@@ -1335,15 +1291,15 @@ static int rs_ioctl(struct tty_struct *tty,
 		case TIOCMIWAIT:
 			local_irq_save(flags);
 			/* note the counters on entry */
-			cprev = info->state->icount;
+			cprev = info->icount;
 			local_irq_restore(flags);
 			while (1) {
-				interruptible_sleep_on(&info->delta_msr_wait);
+				interruptible_sleep_on(&info->tport.delta_msr_wait);
 				/* see if a signal did it */
 				if (signal_pending(current))
 					return -ERESTARTSYS;
 				local_irq_save(flags);
-				cnow = info->state->icount; /* atomic copy */
+				cnow = info->icount; /* atomic copy */
 				local_irq_restore(flags);
 				if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && 
 				    cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
@@ -1372,11 +1328,11 @@ static int rs_ioctl(struct tty_struct *tty,
 
 static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 {
-	struct async_struct *info = tty->driver_data;
+	struct serial_state *info = tty->driver_data;
 	unsigned long flags;
 	unsigned int cflag = tty->termios->c_cflag;
 
-	change_speed(info, old_termios);
+	change_speed(tty, info, old_termios);
 
 	/* Handle transition to B0 status */
 	if ((old_termios->c_cflag & CBAUD) &&
@@ -1432,64 +1388,23 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
  */
 static void rs_close(struct tty_struct *tty, struct file * filp)
 {
-	struct async_struct * info = tty->driver_data;
-	struct serial_state *state;
-	unsigned long flags;
+	struct serial_state *state = tty->driver_data;
+	struct tty_port *port = &state->tport;
 
-	if (!info || serial_paranoia_check(info, tty->name, "rs_close"))
+	if (serial_paranoia_check(state, tty->name, "rs_close"))
 		return;
 
-	state = info->state;
-
-	local_irq_save(flags);
-
-	if (tty_hung_up_p(filp)) {
-		DBG_CNT("before DEC-hung");
-		local_irq_restore(flags);
+	if (tty_port_close_start(port, tty, filp) == 0)
 		return;
-	}
 
-#ifdef SERIAL_DEBUG_OPEN
-	printk("rs_close ttys%d, count = %d\n", info->line, state->count);
-#endif
-	if ((tty->count == 1) && (state->count != 1)) {
-		/*
-		 * Uh, oh.  tty->count is 1, which means that the tty
-		 * structure will be freed.  state->count should always
-		 * be one in these conditions.  If it's greater than
-		 * one, we've got real problems, since it means the
-		 * serial port won't be shutdown.
-		 */
-		printk("rs_close: bad serial port count; tty->count is 1, "
-		       "state->count is %d\n", state->count);
-		state->count = 1;
-	}
-	if (--state->count < 0) {
-		printk("rs_close: bad serial port count for ttys%d: %d\n",
-		       info->line, state->count);
-		state->count = 0;
-	}
-	if (state->count) {
-		DBG_CNT("before DEC-2");
-		local_irq_restore(flags);
-		return;
-	}
-	info->flags |= ASYNC_CLOSING;
-	/*
-	 * Now we wait for the transmit buffer to clear; and we notify 
-	 * the line discipline to only process XON/XOFF characters.
-	 */
-	tty->closing = 1;
-	if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE)
-		tty_wait_until_sent(tty, info->closing_wait);
 	/*
 	 * At this point we stop accepting input.  To do this, we
 	 * disable the receive line status interrupts, and tell the
 	 * interrupt driver to stop checking the data ready bit in the
 	 * line status register.
 	 */
-	info->read_status_mask &= ~UART_LSR_DR;
-	if (info->flags & ASYNC_INITIALIZED) {
+	state->read_status_mask &= ~UART_LSR_DR;
+	if (port->flags & ASYNC_INITIALIZED) {
 	        /* disable receive interrupts */
 	        custom.intena = IF_RBF;
 		mb();
@@ -1502,24 +1417,15 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
 		 * has completely drained; this is especially
 		 * important if there is a transmit FIFO!
 		 */
-		rs_wait_until_sent(tty, info->timeout);
+		rs_wait_until_sent(tty, state->timeout);
 	}
-	shutdown(info);
+	shutdown(tty, state);
 	rs_flush_buffer(tty);
 		
 	tty_ldisc_flush(tty);
-	tty->closing = 0;
-	info->event = 0;
-	info->tty = NULL;
-	if (info->blocked_open) {
-		if (info->close_delay) {
-			msleep_interruptible(jiffies_to_msecs(info->close_delay));
-		}
-		wake_up_interruptible(&info->open_wait);
-	}
-	info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
-	wake_up_interruptible(&info->close_wait);
-	local_irq_restore(flags);
+	port->tty = NULL;
+
+	tty_port_close_end(port, tty);
 }
 
 /*
@@ -1527,7 +1433,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
  */
 static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
 {
-	struct async_struct * info = tty->driver_data;
+	struct serial_state *info = tty->driver_data;
 	unsigned long orig_jiffies, char_time;
 	int lsr;
 
@@ -1590,173 +1496,17 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
  */
 static void rs_hangup(struct tty_struct *tty)
 {
-	struct async_struct * info = tty->driver_data;
-	struct serial_state *state = info->state;
+	struct serial_state *info = tty->driver_data;
 
 	if (serial_paranoia_check(info, tty->name, "rs_hangup"))
 		return;
 
-	state = info->state;
-
 	rs_flush_buffer(tty);
-	shutdown(info);
-	info->event = 0;
-	state->count = 0;
-	info->flags &= ~ASYNC_NORMAL_ACTIVE;
-	info->tty = NULL;
-	wake_up_interruptible(&info->open_wait);
-}
-
-/*
- * ------------------------------------------------------------
- * rs_open() and friends
- * ------------------------------------------------------------
- */
-static int block_til_ready(struct tty_struct *tty, struct file * filp,
-			   struct async_struct *info)
-{
-#ifdef DECLARE_WAITQUEUE
-	DECLARE_WAITQUEUE(wait, current);
-#else
-	struct wait_queue wait = { current, NULL };
-#endif
-	struct serial_state *state = info->state;
-	int		retval;
-	int		do_clocal = 0, extra_count = 0;
-	unsigned long	flags;
-
-	/*
-	 * If the device is in the middle of being closed, then block
-	 * until it's done, and then try again.
-	 */
-	if (tty_hung_up_p(filp) ||
-	    (info->flags & ASYNC_CLOSING)) {
-		if (info->flags & ASYNC_CLOSING)
-			interruptible_sleep_on(&info->close_wait);
-#ifdef SERIAL_DO_RESTART
-		return ((info->flags & ASYNC_HUP_NOTIFY) ?
-			-EAGAIN : -ERESTARTSYS);
-#else
-		return -EAGAIN;
-#endif
-	}
-
-	/*
-	 * If non-blocking mode is set, or the port is not enabled,
-	 * then make the check up front and then exit.
-	 */
-	if ((filp->f_flags & O_NONBLOCK) ||
-	    (tty->flags & (1 << TTY_IO_ERROR))) {
-		info->flags |= ASYNC_NORMAL_ACTIVE;
-		return 0;
-	}
-
-	if (tty->termios->c_cflag & CLOCAL)
-		do_clocal = 1;
-
-	/*
-	 * Block waiting for the carrier detect and the line to become
-	 * free (i.e., not in use by the callout).  While we are in
-	 * this loop, state->count is dropped by one, so that
-	 * rs_close() knows when to free things.  We restore it upon
-	 * exit, either normal or abnormal.
-	 */
-	retval = 0;
-	add_wait_queue(&info->open_wait, &wait);
-#ifdef SERIAL_DEBUG_OPEN
-	printk("block_til_ready before block: ttys%d, count = %d\n",
-	       state->line, state->count);
-#endif
-	local_irq_save(flags);
-	if (!tty_hung_up_p(filp)) {
-		extra_count = 1;
-		state->count--;
-	}
-	local_irq_restore(flags);
-	info->blocked_open++;
-	while (1) {
-		local_irq_save(flags);
-		if (tty->termios->c_cflag & CBAUD)
-		        rtsdtr_ctrl(SER_DTR|SER_RTS);
-		local_irq_restore(flags);
-		set_current_state(TASK_INTERRUPTIBLE);
-		if (tty_hung_up_p(filp) ||
-		    !(info->flags & ASYNC_INITIALIZED)) {
-#ifdef SERIAL_DO_RESTART
-			if (info->flags & ASYNC_HUP_NOTIFY)
-				retval = -EAGAIN;
-			else
-				retval = -ERESTARTSYS;
-#else
-			retval = -EAGAIN;
-#endif
-			break;
-		}
-		if (!(info->flags & ASYNC_CLOSING) &&
-		    (do_clocal || (!(ciab.pra & SER_DCD)) ))
-			break;
-		if (signal_pending(current)) {
-			retval = -ERESTARTSYS;
-			break;
-		}
-#ifdef SERIAL_DEBUG_OPEN
-		printk("block_til_ready blocking: ttys%d, count = %d\n",
-		       info->line, state->count);
-#endif
-		tty_unlock();
-		schedule();
-		tty_lock();
-	}
-	__set_current_state(TASK_RUNNING);
-	remove_wait_queue(&info->open_wait, &wait);
-	if (extra_count)
-		state->count++;
-	info->blocked_open--;
-#ifdef SERIAL_DEBUG_OPEN
-	printk("block_til_ready after blocking: ttys%d, count = %d\n",
-	       info->line, state->count);
-#endif
-	if (retval)
-		return retval;
-	info->flags |= ASYNC_NORMAL_ACTIVE;
-	return 0;
-}
-
-static int get_async_struct(int line, struct async_struct **ret_info)
-{
-	struct async_struct *info;
-	struct serial_state *sstate;
-
-	sstate = rs_table + line;
-	sstate->count++;
-	if (sstate->info) {
-		*ret_info = sstate->info;
-		return 0;
-	}
-	info = kzalloc(sizeof(struct async_struct), GFP_KERNEL);
-	if (!info) {
-		sstate->count--;
-		return -ENOMEM;
-	}
-#ifdef DECLARE_WAITQUEUE
-	init_waitqueue_head(&info->open_wait);
-	init_waitqueue_head(&info->close_wait);
-	init_waitqueue_head(&info->delta_msr_wait);
-#endif
-	info->magic = SERIAL_MAGIC;
-	info->port = sstate->port;
-	info->flags = sstate->flags;
-	info->xmit_fifo_size = sstate->xmit_fifo_size;
-	info->line = line;
-	tasklet_init(&info->tlet, do_softint, (unsigned long)info);
-	info->state = sstate;
-	if (sstate->info) {
-		kfree(info);
-		*ret_info = sstate->info;
-		return 0;
-	}
-	*ret_info = sstate->info = info;
-	return 0;
+	shutdown(tty, info);
+	info->tport.count = 0;
+	info->tport.flags &= ~ASYNC_NORMAL_ACTIVE;
+	info->tport.tty = NULL;
+	wake_up_interruptible(&info->tport.open_wait);
 }
 
 /*
@@ -1767,91 +1517,42 @@ static int get_async_struct(int line, struct async_struct **ret_info)
  */
 static int rs_open(struct tty_struct *tty, struct file * filp)
 {
-	struct async_struct	*info;
-	int 			retval, line;
+	struct serial_state *info = rs_table + tty->index;
+	struct tty_port *port = &info->tport;
+	int retval;
 
-	line = tty->index;
-	if ((line < 0) || (line >= NR_PORTS)) {
-		return -ENODEV;
-	}
-	retval = get_async_struct(line, &info);
-	if (retval) {
-		return retval;
-	}
+	port->count++;
+	port->tty = tty;
 	tty->driver_data = info;
-	info->tty = tty;
+	tty->port = port;
 	if (serial_paranoia_check(info, tty->name, "rs_open"))
 		return -ENODEV;
 
-#ifdef SERIAL_DEBUG_OPEN
-	printk("rs_open %s, count = %d\n", tty->name, info->state->count);
-#endif
-	info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+	tty->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 
-	/*
-	 * If the port is the middle of closing, bail out now
-	 */
-	if (tty_hung_up_p(filp) ||
-	    (info->flags & ASYNC_CLOSING)) {
-		if (info->flags & ASYNC_CLOSING)
-			interruptible_sleep_on(&info->close_wait);
-#ifdef SERIAL_DO_RESTART
-		return ((info->flags & ASYNC_HUP_NOTIFY) ?
-			-EAGAIN : -ERESTARTSYS);
-#else
-		return -EAGAIN;
-#endif
-	}
-
-	/*
-	 * Start up serial port
-	 */
-	retval = startup(info);
-	if (retval) {
-		return retval;
-	}
-
-	retval = block_til_ready(tty, filp, info);
+	retval = startup(tty, info);
 	if (retval) {
-#ifdef SERIAL_DEBUG_OPEN
-		printk("rs_open returning after block_til_ready with %d\n",
-		       retval);
-#endif
 		return retval;
 	}
 
-#ifdef SERIAL_DEBUG_OPEN
-	printk("rs_open %s successful...", tty->name);
-#endif
-	return 0;
+	return tty_port_block_til_ready(port, tty, filp);
 }
 
 /*
  * /proc fs routines....
  */
 
-static inline void line_info(struct seq_file *m, struct serial_state *state)
+static inline void line_info(struct seq_file *m, int line,
+		struct serial_state *state)
 {
-	struct async_struct *info = state->info, scr_info;
 	char	stat_buf[30], control, status;
 	unsigned long flags;
 
-	seq_printf(m, "%d: uart:amiga_builtin",state->line);
+	seq_printf(m, "%d: uart:amiga_builtin", line);
 
-	/*
-	 * Figure out the current RS-232 lines
-	 */
-	if (!info) {
-		info = &scr_info;	/* This is just for serial_{in,out} */
-
-		info->magic = SERIAL_MAGIC;
-		info->flags = state->flags;
-		info->quot = 0;
-		info->tty = NULL;
-	}
 	local_irq_save(flags);
 	status = ciab.pra;
-	control = info ? info->MCR : status;
+	control = (state->tport.flags & ASYNC_INITIALIZED) ? state->MCR : status;
 	local_irq_restore(flags);
 
 	stat_buf[0] = 0;
@@ -1867,9 +1568,8 @@ static inline void line_info(struct seq_file *m, struct serial_state *state)
 	if(!(status & SER_DCD))
 		strcat(stat_buf, "|CD");
 
-	if (info->quot) {
-		seq_printf(m, " baud:%d", state->baud_base / info->quot);
-	}
+	if (state->quot)
+		seq_printf(m, " baud:%d", state->baud_base / state->quot);
 
 	seq_printf(m, " tx:%d rx:%d", state->icount.tx, state->icount.rx);
 
@@ -1894,7 +1594,7 @@ static inline void line_info(struct seq_file *m, struct serial_state *state)
 static int rs_proc_show(struct seq_file *m, void *v)
 {
 	seq_printf(m, "serinfo:1.0 driver:%s\n", serial_version);
-	line_info(m, &rs_table[0]);
+	line_info(m, 0, &rs_table[0]);
 	return 0;
 }
 
@@ -1955,6 +1655,32 @@ static const struct tty_operations serial_ops = {
 	.proc_fops = &rs_proc_fops,
 };
 
+static int amiga_carrier_raised(struct tty_port *port)
+{
+	return !(ciab.pra & SER_DCD);
+}
+
+static void amiga_dtr_rts(struct tty_port *port, int raise)
+{
+	struct serial_state *info = container_of(port, struct serial_state,
+			tport);
+	unsigned long flags;
+
+	if (raise)
+		info->MCR |= SER_DTR|SER_RTS;
+	else
+		info->MCR &= ~(SER_DTR|SER_RTS);
+
+	local_irq_save(flags);
+	rtsdtr_ctrl(info->MCR);
+	local_irq_restore(flags);
+}
+
+static const struct tty_port_operations amiga_port_ops = {
+	.carrier_raised = amiga_carrier_raised,
+	.dtr_rts = amiga_dtr_rts,
+};
+
 /*
  * The serial driver boot-time initialization code!
  */
@@ -1964,17 +1690,14 @@ static int __init amiga_serial_probe(struct platform_device *pdev)
 	struct serial_state * state;
 	int error;
 
-	serial_driver = alloc_tty_driver(1);
+	serial_driver = alloc_tty_driver(NR_PORTS);
 	if (!serial_driver)
 		return -ENOMEM;
 
-	IRQ_ports = NULL;
-
 	show_serial_version();
 
 	/* Initialize the tty_driver structure */
 
-	serial_driver->owner = THIS_MODULE;
 	serial_driver->driver_name = "amiserial";
 	serial_driver->name = "ttyS";
 	serial_driver->major = TTY_MAJOR;
@@ -1992,20 +1715,17 @@ static int __init amiga_serial_probe(struct platform_device *pdev)
 		goto fail_put_tty_driver;
 
 	state = rs_table;
-	state->magic = SSTATE_MAGIC;
 	state->port = (int)&custom.serdatr; /* Just to give it a value */
-	state->line = 0;
 	state->custom_divisor = 0;
-	state->close_delay = 5*HZ/10;
-	state->closing_wait = 30*HZ;
 	state->icount.cts = state->icount.dsr = 
 	  state->icount.rng = state->icount.dcd = 0;
 	state->icount.rx = state->icount.tx = 0;
 	state->icount.frame = state->icount.parity = 0;
 	state->icount.overrun = state->icount.brk = 0;
+	tty_port_init(&state->tport);
+	state->tport.ops = &amiga_port_ops;
 
-	printk(KERN_INFO "ttyS%d is the amiga builtin serial port\n",
-		       state->line);
+	printk(KERN_INFO "ttyS0 is the amiga builtin serial port\n");
 
 	/* Hardware set up */
 
@@ -2058,20 +1778,15 @@ static int __exit amiga_serial_remove(struct platform_device *pdev)
 {
 	int error;
 	struct serial_state *state = platform_get_drvdata(pdev);
-	struct async_struct *info = state->info;
 
 	/* printk("Unloading %s: version %s\n", serial_name, serial_version); */
-	tasklet_kill(&info->tlet);
 	if ((error = tty_unregister_driver(serial_driver)))
 		printk("SERIAL: failed to unregister serial driver (%d)\n",
 		       error);
 	put_tty_driver(serial_driver);
 
-	rs_table[0].info = NULL;
-	kfree(info);
-
-	free_irq(IRQ_AMIGA_TBE, rs_table);
-	free_irq(IRQ_AMIGA_RBF, rs_table);
+	free_irq(IRQ_AMIGA_TBE, state);
+	free_irq(IRQ_AMIGA_RBF, state);
 
 	platform_set_drvdata(pdev, NULL);