diff options
Diffstat (limited to 'drivers/usb/core/hub.c')
| -rw-r--r-- | drivers/usb/core/hub.c | 45 |
1 files changed, 38 insertions, 7 deletions
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 92dde941fdb..06cec635e70 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1112,16 +1112,13 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) /* * USB3 protocol ports will automatically transition * to Enabled state when detect an USB3.0 device attach. - * Do not disable USB3 protocol ports. + * Do not disable USB3 protocol ports, just pretend + * power was lost */ - if (!hub_is_superspeed(hdev)) { + portstatus &= ~USB_PORT_STAT_ENABLE; + if (!hub_is_superspeed(hdev)) usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_ENABLE); - portstatus &= ~USB_PORT_STAT_ENABLE; - } else { - /* Pretend that power was lost for USB3 devs */ - portstatus &= ~USB_PORT_STAT_ENABLE; - } } /* Clear status-change flags; we'll debounce later */ @@ -3958,6 +3955,32 @@ static int hub_set_address(struct usb_device *udev, int devnum) return retval; } +/* + * There are reports of USB 3.0 devices that say they support USB 2.0 Link PM + * when they're plugged into a USB 2.0 port, but they don't work when LPM is + * enabled. + * + * Only enable USB 2.0 Link PM if the port is internal (hardwired), or the + * device says it supports the new USB 2.0 Link PM errata by setting the BESL + * support bit in the BOS descriptor. + */ +static void hub_set_initial_usb2_lpm_policy(struct usb_device *udev) +{ + int connect_type; + + if (!udev->usb2_hw_lpm_capable) + return; + + connect_type = usb_get_hub_port_connect_type(udev->parent, + udev->portnum); + + if ((udev->bos->ext_cap->bmAttributes & USB_BESL_SUPPORT) || + connect_type == USB_PORT_CONNECT_TYPE_HARD_WIRED) { + udev->usb2_hw_lpm_allowed = 1; + usb_set_usb2_hardware_lpm(udev, 1); + } +} + /* Reset device, (re)assign address, get device descriptor. * Device connection must be stable, no more debouncing needed. * Returns device in USB_STATE_ADDRESS, except on error. @@ -4251,6 +4274,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, /* notify HCD that we have a device connected and addressed */ if (hcd->driver->update_device) hcd->driver->update_device(hcd, udev); + hub_set_initial_usb2_lpm_policy(udev); fail: if (retval) { hub_port_disable(hub, port1, 0); @@ -5095,6 +5119,12 @@ static int usb_reset_and_verify_device(struct usb_device *udev) } parent_hub = usb_hub_to_struct_hub(parent_hdev); + /* Disable USB2 hardware LPM. + * It will be re-enabled by the enumeration process. + */ + if (udev->usb2_hw_lpm_enabled == 1) + usb_set_usb2_hardware_lpm(udev, 0); + bos = udev->bos; udev->bos = NULL; @@ -5202,6 +5232,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev) done: /* Now that the alt settings are re-installed, enable LTM and LPM. */ + usb_set_usb2_hardware_lpm(udev, 1); usb_unlocked_enable_lpm(udev); usb_enable_ltm(udev); usb_release_bos_descriptor(udev); |