summaryrefslogtreecommitdiffstats
path: root/drivers/usb/core
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/core')
-rw-r--r--drivers/usb/core/devices.c7
-rw-r--r--drivers/usb/core/devio.c24
-rw-r--r--drivers/usb/core/driver.c6
-rw-r--r--drivers/usb/core/hcd-pci.c11
-rw-r--r--drivers/usb/core/hcd.c153
-rw-r--r--drivers/usb/core/hcd.h4
-rw-r--r--drivers/usb/core/hub.c45
-rw-r--r--drivers/usb/core/message.c17
-rw-r--r--drivers/usb/core/notify.c15
-rw-r--r--drivers/usb/core/usb.c5
10 files changed, 159 insertions, 128 deletions
diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c
index 2684e15b813..c0f37343a27 100644
--- a/drivers/usb/core/devices.c
+++ b/drivers/usb/core/devices.c
@@ -57,6 +57,7 @@
#include <linux/usb.h>
#include <linux/smp_lock.h>
#include <linux/usbdevice_fs.h>
+#include <linux/mutex.h>
#include <asm/uaccess.h>
#include "usb.h"
@@ -570,7 +571,7 @@ static ssize_t usb_device_read(struct file *file, char __user *buf, size_t nbyte
if (!access_ok(VERIFY_WRITE, buf, nbytes))
return -EFAULT;
- down (&usb_bus_list_lock);
+ mutex_lock(&usb_bus_list_lock);
/* print devices for all busses */
list_for_each_entry(bus, &usb_bus_list, bus_list) {
/* recurse through all children of the root hub */
@@ -580,12 +581,12 @@ static ssize_t usb_device_read(struct file *file, char __user *buf, size_t nbyte
ret = usb_device_dump(&buf, &nbytes, &skip_bytes, ppos, bus->root_hub, bus, 0, 0, 0);
usb_unlock_device(bus->root_hub);
if (ret < 0) {
- up(&usb_bus_list_lock);
+ mutex_unlock(&usb_bus_list_lock);
return ret;
}
total_written += ret;
}
- up (&usb_bus_list_lock);
+ mutex_unlock(&usb_bus_list_lock);
return total_written;
}
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 2b68998fe4b..545da37afca 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -134,26 +134,21 @@ static ssize_t usbdev_read(struct file *file, char __user *buf, size_t nbytes, l
}
if (pos < sizeof(struct usb_device_descriptor)) {
- struct usb_device_descriptor *desc = kmalloc(sizeof(*desc), GFP_KERNEL);
- if (!desc) {
- ret = -ENOMEM;
- goto err;
- }
- memcpy(desc, &dev->descriptor, sizeof(dev->descriptor));
- le16_to_cpus(&desc->bcdUSB);
- le16_to_cpus(&desc->idVendor);
- le16_to_cpus(&desc->idProduct);
- le16_to_cpus(&desc->bcdDevice);
+ struct usb_device_descriptor temp_desc ; /* 18 bytes - fits on the stack */
+
+ memcpy(&temp_desc, &dev->descriptor, sizeof(dev->descriptor));
+ le16_to_cpus(&temp_desc.bcdUSB);
+ le16_to_cpus(&temp_desc.idVendor);
+ le16_to_cpus(&temp_desc.idProduct);
+ le16_to_cpus(&temp_desc.bcdDevice);
len = sizeof(struct usb_device_descriptor) - pos;
if (len > nbytes)
len = nbytes;
- if (copy_to_user(buf, ((char *)desc) + pos, len)) {
- kfree(desc);
+ if (copy_to_user(buf, ((char *)&temp_desc) + pos, len)) {
ret = -EFAULT;
goto err;
}
- kfree(desc);
*ppos += len;
buf += len;
@@ -498,7 +493,8 @@ static int check_ctrlrecip(struct dev_state *ps, unsigned int requesttype, unsig
{
int ret = 0;
- if (ps->dev->state != USB_STATE_CONFIGURED)
+ if (ps->dev->state != USB_STATE_ADDRESS
+ && ps->dev->state != USB_STATE_CONFIGURED)
return -EHOSTUNREACH;
if (USB_TYPE_VENDOR == (USB_TYPE_MASK & requesttype))
return 0;
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index dce9d987f0f..c196f384530 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -378,7 +378,7 @@ const struct usb_device_id *usb_match_id(struct usb_interface *interface,
return NULL;
}
-EXPORT_SYMBOL(usb_match_id);
+EXPORT_SYMBOL_GPL_FUTURE(usb_match_id);
int usb_device_match(struct device *dev, struct device_driver *drv)
{
@@ -446,7 +446,7 @@ int usb_register_driver(struct usb_driver *new_driver, struct module *owner)
return retval;
}
-EXPORT_SYMBOL(usb_register_driver);
+EXPORT_SYMBOL_GPL_FUTURE(usb_register_driver);
/**
* usb_deregister - unregister a USB driver
@@ -469,4 +469,4 @@ void usb_deregister(struct usb_driver *driver)
usbfs_update_special();
}
-EXPORT_SYMBOL(usb_deregister);
+EXPORT_SYMBOL_GPL_FUTURE(usb_deregister);
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 29b5b2a6e18..e0afb5ad29e 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -264,14 +264,19 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t message)
*/
retval = pci_set_power_state (dev, PCI_D3hot);
if (retval == 0) {
- dev_dbg (hcd->self.controller, "--> PCI D3\n");
+ int wake = device_can_wakeup(&hcd->self.root_hub->dev);
+
+ wake = wake && device_may_wakeup(hcd->self.controller);
+
+ dev_dbg (hcd->self.controller, "--> PCI D3%s\n",
+ wake ? "/wakeup" : "");
/* Ignore these return values. We rely on pci code to
* reject requests the hardware can't implement, rather
* than coding the same thing.
*/
- (void) pci_enable_wake (dev, PCI_D3hot, hcd->remote_wakeup);
- (void) pci_enable_wake (dev, PCI_D3cold, hcd->remote_wakeup);
+ (void) pci_enable_wake (dev, PCI_D3hot, wake);
+ (void) pci_enable_wake (dev, PCI_D3cold, wake);
} else {
dev_dbg (&dev->dev, "PCI D3 suspend fail, %d\n",
retval);
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 0018bbc4de3..fbd938d4ea5 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -34,6 +34,7 @@
#include <asm/scatterlist.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
+#include <linux/mutex.h>
#include <asm/irq.h>
#include <asm/byteorder.h>
@@ -93,7 +94,7 @@ struct usb_busmap {
static struct usb_busmap busmap;
/* used when updating list of hcds */
-DECLARE_MUTEX (usb_bus_list_lock); /* exported only for usbfs */
+DEFINE_MUTEX(usb_bus_list_lock); /* exported only for usbfs */
EXPORT_SYMBOL_GPL (usb_bus_list_lock);
/* used for controlling access to virtual root hubs */
@@ -366,21 +367,39 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
/* DEVICE REQUESTS */
+ /* The root hub's remote wakeup enable bit is implemented using
+ * driver model wakeup flags. If this system supports wakeup
+ * through USB, userspace may change the default "allow wakeup"
+ * policy through sysfs or these calls.
+ *
+ * Most root hubs support wakeup from downstream devices, for
+ * runtime power management (disabling USB clocks and reducing
+ * VBUS power usage). However, not all of them do so; silicon,
+ * board, and BIOS bugs here are not uncommon, so these can't
+ * be treated quite like external hubs.
+ *
+ * Likewise, not all root hubs will pass wakeup events upstream,
+ * to wake up the whole system. So don't assume root hub and
+ * controller capabilities are identical.
+ */
+
case DeviceRequest | USB_REQ_GET_STATUS:
- tbuf [0] = (hcd->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP)
+ tbuf [0] = (device_may_wakeup(&hcd->self.root_hub->dev)
+ << USB_DEVICE_REMOTE_WAKEUP)
| (1 << USB_DEVICE_SELF_POWERED);
tbuf [1] = 0;
len = 2;
break;
case DeviceOutRequest | USB_REQ_CLEAR_FEATURE:
if (wValue == USB_DEVICE_REMOTE_WAKEUP)
- hcd->remote_wakeup = 0;
+ device_set_wakeup_enable(&hcd->self.root_hub->dev, 0);
else
goto error;
break;
case DeviceOutRequest | USB_REQ_SET_FEATURE:
- if (hcd->can_wakeup && wValue == USB_DEVICE_REMOTE_WAKEUP)
- hcd->remote_wakeup = 1;
+ if (device_can_wakeup(&hcd->self.root_hub->dev)
+ && wValue == USB_DEVICE_REMOTE_WAKEUP)
+ device_set_wakeup_enable(&hcd->self.root_hub->dev, 1);
else
goto error;
break;
@@ -409,7 +428,7 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
bufp = fs_rh_config_descriptor;
len = sizeof fs_rh_config_descriptor;
}
- if (hcd->can_wakeup)
+ if (device_can_wakeup(&hcd->self.root_hub->dev))
patch_wakeup = 1;
break;
case USB_DT_STRING << 8:
@@ -761,14 +780,14 @@ static int usb_register_bus(struct usb_bus *bus)
{
int busnum;
- down (&usb_bus_list_lock);
+ mutex_lock(&usb_bus_list_lock);
busnum = find_next_zero_bit (busmap.busmap, USB_MAXBUS, 1);
if (busnum < USB_MAXBUS) {
set_bit (busnum, busmap.busmap);
bus->busnum = busnum;
} else {
printk (KERN_ERR "%s: too many buses\n", usbcore_name);
- up(&usb_bus_list_lock);
+ mutex_unlock(&usb_bus_list_lock);
return -E2BIG;
}
@@ -776,7 +795,7 @@ static int usb_register_bus(struct usb_bus *bus)
bus->controller, "usb_host%d", busnum);
if (IS_ERR(bus->class_dev)) {
clear_bit(busnum, busmap.busmap);
- up(&usb_bus_list_lock);
+ mutex_unlock(&usb_bus_list_lock);
return PTR_ERR(bus->class_dev);
}
@@ -784,7 +803,7 @@ static int usb_register_bus(struct usb_bus *bus)
/* Add it to the local list of buses */
list_add (&bus->bus_list, &usb_bus_list);
- up (&usb_bus_list_lock);
+ mutex_unlock(&usb_bus_list_lock);
usb_notify_add_bus(bus);
@@ -809,9 +828,9 @@ static void usb_deregister_bus (struct usb_bus *bus)
* controller code, as well as having it call this when cleaning
* itself up
*/
- down (&usb_bus_list_lock);
+ mutex_lock(&usb_bus_list_lock);
list_del (&bus->bus_list);
- up (&usb_bus_list_lock);
+ mutex_unlock(&usb_bus_list_lock);
usb_notify_remove_bus(bus);
@@ -822,18 +841,17 @@ static void usb_deregister_bus (struct usb_bus *bus)
/**
* register_root_hub - called by usb_add_hcd() to register a root hub
- * @usb_dev: the usb root hub device to be registered.
* @hcd: host controller for this root hub
*
* This function registers the root hub with the USB subsystem. It sets up
- * the device properly in the device tree and stores the root_hub pointer
- * in the bus structure, then calls usb_new_device() to register the usb
- * device. It also assigns the root hub's USB address (always 1).
+ * the device properly in the device tree and then calls usb_new_device()
+ * to register the usb device. It also assigns the root hub's USB address
+ * (always 1).
*/
-static int register_root_hub (struct usb_device *usb_dev,
- struct usb_hcd *hcd)
+static int register_root_hub(struct usb_hcd *hcd)
{
struct device *parent_dev = hcd->self.controller;
+ struct usb_device *usb_dev = hcd->self.root_hub;
const int devnum = 1;
int retval;
@@ -844,14 +862,12 @@ static int register_root_hub (struct usb_device *usb_dev,
set_bit (devnum, usb_dev->bus->devmap.devicemap);
usb_set_device_state(usb_dev, USB_STATE_ADDRESS);
- down (&usb_bus_list_lock);
- usb_dev->bus->root_hub = usb_dev;
+ mutex_lock(&usb_bus_list_lock);
usb_dev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(64);
retval = usb_get_device_descriptor(usb_dev, USB_DT_DEVICE_SIZE);
if (retval != sizeof usb_dev->descriptor) {
- usb_dev->bus->root_hub = NULL;
- up (&usb_bus_list_lock);
+ mutex_unlock(&usb_bus_list_lock);
dev_dbg (parent_dev, "can't read %s device descriptor %d\n",
usb_dev->dev.bus_id, retval);
return (retval < 0) ? retval : -EMSGSIZE;
@@ -859,11 +875,10 @@ static int register_root_hub (struct usb_device *usb_dev,
retval = usb_new_device (usb_dev);
if (retval) {
- usb_dev->bus->root_hub = NULL;
dev_err (parent_dev, "can't register root hub for %s, %d\n",
usb_dev->dev.bus_id, retval);
}
- up (&usb_bus_list_lock);
+ mutex_unlock(&usb_bus_list_lock);
if (retval == 0) {
spin_lock_irq (&hcd_root_hub_lock);
@@ -1090,7 +1105,6 @@ static void urb_unlink (struct urb *urb)
spin_lock_irqsave (&hcd_data_lock, flags);
list_del_init (&urb->urb_list);
spin_unlock_irqrestore (&hcd_data_lock, flags);
- usb_put_dev (urb->dev);
}
@@ -1130,7 +1144,6 @@ static int hcd_submit_urb (struct urb *urb, gfp_t mem_flags)
case HC_STATE_RUNNING:
case HC_STATE_RESUMING:
doit:
- usb_get_dev (urb->dev);
list_add_tail (&urb->urb_list, &ep->urb_list);
status = 0;
break;
@@ -1771,12 +1784,10 @@ int usb_add_hcd(struct usb_hcd *hcd,
set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
- /* till now HC has been in an indeterminate state ... */
- if (hcd->driver->reset && (retval = hcd->driver->reset(hcd)) < 0) {
- dev_err(hcd->self.controller, "can't reset\n");
- return retval;
- }
-
+ /* HC is in reset state, but accessible. Now do the one-time init,
+ * bottom up so that hcds can customize the root hubs before khubd
+ * starts talking to them. (Note, bus id is assigned early too.)
+ */
if ((retval = hcd_buffer_create(hcd)) != 0) {
dev_dbg(hcd->self.controller, "pool alloc failed\n");
return retval;
@@ -1785,6 +1796,36 @@ int usb_add_hcd(struct usb_hcd *hcd,
if ((retval = usb_register_bus(&hcd->self)) < 0)
goto err_register_bus;
+ if ((rhdev = usb_alloc_dev(NULL, &hcd->self, 0)) == NULL) {
+ dev_err(hcd->self.controller, "unable to allocate root hub\n");
+ retval = -ENOMEM;
+ goto err_allocate_root_hub;
+ }
+ rhdev->speed = (hcd->driver->flags & HCD_USB2) ? USB_SPEED_HIGH :
+ USB_SPEED_FULL;
+ hcd->self.root_hub = rhdev;
+
+ /* "reset" is misnamed; its role is now one-time init. the controller
+ * should already have been reset (and boot firmware kicked off etc).
+ */
+ if (hcd->driver->reset && (retval = hcd->driver->reset(hcd)) < 0) {
+ dev_err(hcd->self.controller, "can't setup\n");
+ goto err_hcd_driver_setup;
+ }
+
+ /* wakeup flag init is in transition; for now we can't rely on PCI to
+ * initialize these bits properly, so we let reset() override it.
+ * This init should _precede_ the reset() once PCI behaves.
+ */
+ device_init_wakeup(&rhdev->dev,
+ device_can_wakeup(hcd->self.controller));
+
+ /* NOTE: root hub and controller capabilities may not be the same */
+ if (device_can_wakeup(hcd->self.controller)
+ && device_can_wakeup(&hcd->self.root_hub->dev))
+ dev_dbg(hcd->self.controller, "supports USB remote wakeup\n");
+
+ /* enable irqs just before we start the controller */
if (hcd->driver->irq) {
char buf[8], *bufp = buf;
@@ -1816,56 +1857,32 @@ int usb_add_hcd(struct usb_hcd *hcd,
(unsigned long long)hcd->rsrc_start);
}
- /* Allocate the root hub before calling hcd->driver->start(),
- * but don't register it until afterward so that the hardware
- * is running.
- */
- if ((rhdev = usb_alloc_dev(NULL, &hcd->self, 0)) == NULL) {
- dev_err(hcd->self.controller, "unable to allocate root hub\n");
- retval = -ENOMEM;
- goto err_allocate_root_hub;
- }
-
- /* Although in principle hcd->driver->start() might need to use rhdev,
- * none of the current drivers do.
- */
if ((retval = hcd->driver->start(hcd)) < 0) {
dev_err(hcd->self.controller, "startup error %d\n", retval);
goto err_hcd_driver_start;
}
- /* hcd->driver->start() reported can_wakeup, probably with
- * assistance from board's boot firmware.
- * NOTE: normal devices won't enable wakeup by default.
- */
- if (hcd->can_wakeup)
- dev_dbg(hcd->self.controller, "supports USB remote wakeup\n");
- hcd->remote_wakeup = hcd->can_wakeup;
-
- rhdev->speed = (hcd->driver->flags & HCD_USB2) ? USB_SPEED_HIGH :
- USB_SPEED_FULL;
+ /* starting here, usbcore will pay attention to this root hub */
rhdev->bus_mA = min(500u, hcd->power_budget);
- if ((retval = register_root_hub(rhdev, hcd)) != 0)
+ if ((retval = register_root_hub(hcd)) != 0)
goto err_register_root_hub;
if (hcd->uses_new_polling && hcd->poll_rh)
usb_hcd_poll_rh_status(hcd);
return retval;
- err_register_root_hub:
+err_register_root_hub:
hcd->driver->stop(hcd);
-
- err_hcd_driver_start:
- usb_put_dev(rhdev);
-
- err_allocate_root_hub:
+err_hcd_driver_start:
if (hcd->irq >= 0)
free_irq(irqnum, hcd);
-
- err_request_irq:
+err_request_irq:
+err_hcd_driver_setup:
+ hcd->self.root_hub = NULL;
+ usb_put_dev(rhdev);
+err_allocate_root_hub:
usb_deregister_bus(&hcd->self);
-
- err_register_bus:
+err_register_bus:
hcd_buffer_destroy(hcd);
return retval;
}
@@ -1891,9 +1908,9 @@ void usb_remove_hcd(struct usb_hcd *hcd)
hcd->rh_registered = 0;
spin_unlock_irq (&hcd_root_hub_lock);
- down(&usb_bus_list_lock);
+ mutex_lock(&usb_bus_list_lock);
usb_disconnect(&hcd->self.root_hub);
- up(&usb_bus_list_lock);
+ mutex_unlock(&usb_bus_list_lock);
hcd->poll_rh = 0;
del_timer_sync(&hcd->rh_timer);
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index 591b5aad1a1..7022aafb2ae 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -78,8 +78,6 @@ struct usb_hcd { /* usb_bus.hcpriv points to this */
#define HCD_FLAG_HW_ACCESSIBLE 0x00000001
#define HCD_FLAG_SAW_IRQ 0x00000002
- unsigned can_wakeup:1; /* hw supports wakeup? */
- unsigned remote_wakeup:1;/* sw should use wakeup? */
unsigned rh_registered:1;/* is root hub registered? */
/* The next flag is a stopgap, to be removed when all the HCDs
@@ -364,7 +362,7 @@ extern void usb_set_device_state(struct usb_device *udev,
/* exported only within usbcore */
extern struct list_head usb_bus_list;
-extern struct semaphore usb_bus_list_lock;
+extern struct mutex usb_bus_list_lock;
extern wait_queue_head_t usb_kill_urb_queue;
extern struct usb_bus *usb_bus_get (struct usb_bus *bus);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 650d5ee5871..8e65f7a237e 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -22,6 +22,7 @@
#include <linux/usb.h>
#include <linux/usbdevice_fs.h>
#include <linux/kthread.h>
+#include <linux/mutex.h>
#include <asm/semaphore.h>
#include <asm/uaccess.h>
@@ -1005,12 +1006,18 @@ void usb_set_device_state(struct usb_device *udev,
; /* do nothing */
else if (new_state != USB_STATE_NOTATTACHED) {
udev->state = new_state;
- if (new_state == USB_STATE_CONFIGURED)
- device_init_wakeup(&udev->dev,
- (udev->actconfig->desc.bmAttributes
- & USB_CONFIG_ATT_WAKEUP));
- else if (new_state != USB_STATE_SUSPENDED)
- device_init_wakeup(&udev->dev, 0);
+
+ /* root hub wakeup capabilities are managed out-of-band
+ * and may involve silicon errata ... ignore them here.
+ */
+ if (udev->parent) {
+ if (new_state == USB_STATE_CONFIGURED)
+ device_init_wakeup(&udev->dev,
+ (udev->actconfig->desc.bmAttributes
+ & USB_CONFIG_ATT_WAKEUP));
+ else if (new_state != USB_STATE_SUSPENDED)
+ device_init_wakeup(&udev->dev, 0);
+ }
} else
recursively_mark_NOTATTACHED(udev);
spin_unlock_irqrestore(&device_state_lock, flags);
@@ -1172,8 +1179,11 @@ static int choose_configuration(struct usb_device *udev)
c = udev->config;
num_configs = udev->descriptor.bNumConfigurations;
for (i = 0; i < num_configs; (i++, c++)) {
- struct usb_interface_descriptor *desc =
- &c->intf_cache[0]->altsetting->desc;
+ struct usb_interface_descriptor *desc = NULL;
+
+ /* It's possible that a config has no interfaces! */
+ if (c->desc.bNumInterfaces > 0)
+ desc = &c->intf_cache[0]->altsetting->desc;
/*
* HP's USB bus-powered keyboard has only one configuration
@@ -1208,7 +1218,8 @@ static int choose_configuration(struct usb_device *udev)
/* If the first config's first interface is COMM/2/0xff
* (MSFT RNDIS), rule it out unless Linux has host-side
* RNDIS support. */
- if (i == 0 && desc->bInterfaceClass == USB_CLASS_COMM
+ if (i == 0 && desc
+ && desc->bInterfaceClass == USB_CLASS_COMM
&& desc->bInterfaceSubClass == 2
&& desc->bInterfaceProtocol == 0xff) {
#ifndef CONFIG_USB_NET_RNDIS
@@ -1224,8 +1235,8 @@ static int choose_configuration(struct usb_device *udev)
* than a vendor-specific driver. */
else if (udev->descriptor.bDeviceClass !=
USB_CLASS_VENDOR_SPEC &&
- desc->bInterfaceClass !=
- USB_CLASS_VENDOR_SPEC) {
+ (!desc || desc->bInterfaceClass !=
+ USB_CLASS_VENDOR_SPEC)) {
best = c;
break;
}
@@ -1876,18 +1887,18 @@ int usb_resume_device(struct usb_device *udev)
if (udev->state == USB_STATE_NOTATTACHED)
return -ENODEV;
-#ifdef CONFIG_USB_SUSPEND
/* selective resume of one downstream hub-to-device port */
if (udev->parent) {
+#ifdef CONFIG_USB_SUSPEND
if (udev->state == USB_STATE_SUSPENDED) {
// NOTE swsusp may bork us, device state being wrong...
// NOTE this fails if parent is also suspended...
status = hub_port_resume(hdev_to_hub(udev->parent),
udev->portnum, udev);
} else
+#endif
status = 0;
} else
-#endif
status = finish_device_resume(udev);
if (status < 0)
dev_dbg(&udev->dev, "can't resume, status %d\n",
@@ -2162,7 +2173,7 @@ static int
hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
int retry_counter)
{
- static DECLARE_MUTEX(usb_address0_sem);
+ static DEFINE_MUTEX(usb_address0_mutex);
struct usb_device *hdev = hub->hdev;
int i, j, retval;
@@ -2183,7 +2194,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
if (oldspeed == USB_SPEED_LOW)
delay = HUB_LONG_RESET_TIME;
- down(&usb_address0_sem);
+ mutex_lock(&usb_address0_mutex);
/* Reset the device; full speed may morph to high speed */
retval = hub_port_reset(hub, port1, udev, delay);
@@ -2381,7 +2392,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
fail:
if (retval)
hub_port_disable(hub, port1, 0);
- up(&usb_address0_sem);
+ mutex_unlock(&usb_address0_mutex);
return retval;
}
@@ -3017,7 +3028,7 @@ int usb_reset_device(struct usb_device *udev)
parent_hub = hdev_to_hub(parent_hdev);
/* If we're resetting an active hub, take some special actions */
- if (udev->actconfig &&
+ if (udev->actconfig && udev->actconfig->desc.bNumInterfaces > 0 &&
udev->actconfig->interface[0]->dev.driver ==
&hub_driver.driver &&
(hub = hdev_to_hub(udev)) != NULL) {
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 7135e542679..08fb20f06f3 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -631,8 +631,8 @@ int usb_get_descriptor(struct usb_device *dev, unsigned char type, unsigned char
* Returns the number of bytes received on success, or else the status code
* returned by the underlying usb_control_msg() call.
*/
-int usb_get_string(struct usb_device *dev, unsigned short langid,
- unsigned char index, void *buf, int size)
+static int usb_get_string(struct usb_device *dev, unsigned short langid,
+ unsigned char index, void *buf, int size)
{
int i;
int result;
@@ -1388,11 +1388,13 @@ free_interfaces:
if (dev->state != USB_STATE_ADDRESS)
usb_disable_device (dev, 1); // Skip ep0
- i = dev->bus_mA - cp->desc.bMaxPower * 2;
- if (i < 0)
- dev_warn(&dev->dev, "new config #%d exceeds power "
- "limit by %dmA\n",
- configuration, -i);
+ if (cp) {
+ i = dev->bus_mA - cp->desc.bMaxPower * 2;
+ if (i < 0)
+ dev_warn(&dev->dev, "new config #%d exceeds power "
+ "limit by %dmA\n",
+ configuration, -i);
+ }
if ((ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
USB_REQ_SET_CONFIGURATION, 0, configuration, 0,
@@ -1488,7 +1490,6 @@ EXPORT_SYMBOL(usb_sg_wait);
// synchronous control message convenience routines
EXPORT_SYMBOL(usb_get_descriptor);
EXPORT_SYMBOL(usb_get_status);
-EXPORT_SYMBOL(usb_get_string);
EXPORT_SYMBOL(usb_string);
// synchronous calls that also maintain usbcore state
diff --git a/drivers/usb/core/notify.c b/drivers/usb/core/notify.c
index fbbebab52fb..4b55285de9a 100644
--- a/drivers/usb/core/notify.c
+++ b/drivers/usb/core/notify.c
@@ -13,16 +13,17 @@
#include <linux/kernel.h>
#include <linux/notifier.h>
#include <linux/usb.h>
+#include <linux/mutex.h>
#include "usb.h"
static struct notifier_block *usb_notifier_list;
-static DECLARE_MUTEX(usb_notifier_lock);
+static DEFINE_MUTEX(usb_notifier_lock);
static void usb_notifier_chain_register(struct notifier_block **list,
struct notifier_block *n)
{
- down(&usb_notifier_lock);
+ mutex_lock(&usb_notifier_lock);
while (*list) {
if (n->priority > (*list)->priority)
break;
@@ -30,13 +31,13 @@ static void usb_notifier_chain_register(struct notifier_block **list,
}
n->next = *list;
*list = n;
- up(&usb_notifier_lock);
+ mutex_unlock(&usb_notifier_lock);
}
static void usb_notifier_chain_unregister(struct notifier_block **nl,
struct notifier_block *n)
{
- down(&usb_notifier_lock);
+ mutex_lock(&usb_notifier_lock);
while ((*nl)!=NULL) {
if ((*nl)==n) {
*nl = n->next;
@@ -45,7 +46,7 @@ static void usb_notifier_chain_unregister(struct notifier_block **nl,
nl=&((*nl)->next);
}
exit:
- up(&usb_notifier_lock);
+ mutex_unlock(&usb_notifier_lock);
}
static int usb_notifier_call_chain(struct notifier_block **n,
@@ -54,7 +55,7 @@ static int usb_notifier_call_chain(struct notifier_block **n,
int ret=NOTIFY_DONE;
struct notifier_block *nb = *n;
- down(&usb_notifier_lock);
+ mutex_lock(&usb_notifier_lock);
while (nb) {
ret = nb->notifier_call(nb,val,v);
if (ret&NOTIFY_STOP_MASK) {
@@ -63,7 +64,7 @@ static int usb_notifier_call_chain(struct notifier_block **n,
nb = nb->next;
}
exit:
- up(&usb_notifier_lock);
+ mutex_unlock(&usb_notifier_lock);
return ret;
}
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 13d1d367f7f..d7352aa73b5 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -33,6 +33,7 @@
#include <linux/errno.h>
#include <linux/smp_lock.h>
#include <linux/usb.h>
+#include <linux/mutex.h>
#include <asm/io.h>
#include <asm/scatterlist.h>
@@ -639,7 +640,7 @@ struct usb_device *usb_find_device(u16 vendor_id, u16 product_id)
struct usb_bus *bus;
struct usb_device *dev = NULL;
- down(&usb_bus_list_lock);
+ mutex_lock(&usb_bus_list_lock);
for (buslist = usb_bus_list.next;
buslist != &usb_bus_list;
buslist = buslist->next) {
@@ -653,7 +654,7 @@ struct usb_device *usb_find_device(u16 vendor_id, u16 product_id)
goto exit;
}
exit:
- up(&usb_bus_list_lock);
+ mutex_unlock(&usb_bus_list_lock);
return dev;
}
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-05 13:51:04 +0000