summaryrefslogtreecommitdiffstats
path: root/drivers/usb/gadget
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/gadget')
-rw-r--r--drivers/usb/gadget/Kconfig17
-rw-r--r--drivers/usb/gadget/Makefile1
-rw-r--r--drivers/usb/gadget/at91_udc.c1773
-rw-r--r--drivers/usb/gadget/at91_udc.h181
-rw-r--r--drivers/usb/gadget/dummy_hcd.c3
-rw-r--r--drivers/usb/gadget/ether.c53
-rw-r--r--drivers/usb/gadget/file_storage.c4
-rw-r--r--drivers/usb/gadget/gadget_chips.h30
-rw-r--r--drivers/usb/gadget/goku_udc.c3
-rw-r--r--drivers/usb/gadget/inode.c6
-rw-r--r--drivers/usb/gadget/lh7a40x_udc.c3
-rw-r--r--drivers/usb/gadget/net2280.c3
-rw-r--r--drivers/usb/gadget/omap_udc.c6
-rw-r--r--drivers/usb/gadget/pxa2xx_udc.c3
-rw-r--r--drivers/usb/gadget/serial.c9
-rw-r--r--drivers/usb/gadget/zero.c15
16 files changed, 2058 insertions, 52 deletions
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index ff075a53c8d..d80f71877d6 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -187,6 +187,23 @@ config USB_OTG
Select this only if your OMAP board has a Mini-AB connector.
+config USB_GADGET_AT91
+ boolean "AT91 USB Device Port"
+ depends on ARCH_AT91RM9200
+ select USB_GADGET_SELECTED
+ help
+ Many Atmel AT91 processors (such as the AT91RM2000) have a
+ full speed USB Device Port with support for five configurable
+ endpoints (plus endpoint zero).
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "at91_udc" and force all
+ gadget drivers to also be dynamically linked.
+
+config USB_AT91
+ tristate
+ depends on USB_GADGET_AT91
+ default USB_GADGET
config USB_GADGET_DUMMY_HCD
boolean "Dummy HCD (DEVELOPMENT)"
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index d5fd04d886e..5a28e61392e 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_USB_PXA2XX) += pxa2xx_udc.o
obj-$(CONFIG_USB_GOKU) += goku_udc.o
obj-$(CONFIG_USB_OMAP) += omap_udc.o
obj-$(CONFIG_USB_LH7A40X) += lh7a40x_udc.o
+obj-$(CONFIG_USB_AT91) += at91_udc.o
#
# USB gadget drivers
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
new file mode 100644
index 00000000000..865858cfd1c
--- /dev/null
+++ b/drivers/usb/gadget/at91_udc.c
@@ -0,0 +1,1773 @@
+/*
+ * at91_udc -- driver for at91-series USB peripheral controller
+ *
+ * Copyright (C) 2004 by Thomas Rathbone
+ * Copyright (C) 2005 by HP Labs
+ * Copyright (C) 2005 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ */
+
+#undef DEBUG
+#undef VERBOSE
+#undef PACKET_TRACE
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/smp_lock.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/proc_fs.h>
+#include <linux/clk.h>
+#include <linux/usb_ch9.h>
+#include <linux/usb_gadget.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/mach-types.h>
+
+#include <asm/arch/hardware.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/board.h>
+
+#include "at91_udc.h"
+
+
+/*
+ * This controller is simple and PIO-only. It's used in many AT91-series
+ * ARMv4T controllers, including the at91rm9200 (arm920T, with MMU),
+ * at91sam9261 (arm926ejs, with MMU), and several no-mmu versions.
+ *
+ * This driver expects the board has been wired with two GPIOs suppporting
+ * a VBUS sensing IRQ, and a D+ pullup. (They may be omitted, but the
+ * testing hasn't covered such cases.) The pullup is most important; it
+ * provides software control over whether the host enumerates the device.
+ * The VBUS sensing helps during enumeration, and allows both USB clocks
+ * (and the transceiver) to stay gated off until they're necessary, saving
+ * power. During USB suspend, the 48 MHz clock is gated off.
+ */
+
+#define DRIVER_VERSION "8 March 2005"
+
+static const char driver_name [] = "at91_udc";
+static const char ep0name[] = "ep0";
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Read from a UDP register.
+ */
+static inline unsigned long at91_udp_read(unsigned int reg)
+{
+ void __iomem *udp_base = (void __iomem *)AT91_VA_BASE_UDP;
+
+ return __raw_readl(udp_base + reg);
+}
+
+/*
+ * Write to a UDP register.
+ */
+static inline void at91_udp_write(unsigned int reg, unsigned long value)
+{
+ void __iomem *udp_base = (void __iomem *)AT91_VA_BASE_UDP;
+
+ __raw_writel(value, udp_base + reg);
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+
+#include <linux/seq_file.h>
+
+static const char debug_filename[] = "driver/udc";
+
+#define FOURBITS "%s%s%s%s"
+#define EIGHTBITS FOURBITS FOURBITS
+
+static void proc_ep_show(struct seq_file *s, struct at91_ep *ep)
+{
+ static char *types[] = {
+ "control", "out-iso", "out-bulk", "out-int",
+ "BOGUS", "in-iso", "in-bulk", "in-int"};
+
+ u32 csr;
+ struct at91_request *req;
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ csr = __raw_readl(ep->creg);
+
+ /* NOTE: not collecting per-endpoint irq statistics... */
+
+ seq_printf(s, "\n");
+ seq_printf(s, "%s, maxpacket %d %s%s %s%s\n",
+ ep->ep.name, ep->ep.maxpacket,
+ ep->is_in ? "in" : "out",
+ ep->is_iso ? " iso" : "",
+ ep->is_pingpong
+ ? (ep->fifo_bank ? "pong" : "ping")
+ : "",
+ ep->stopped ? " stopped" : "");
+ seq_printf(s, "csr %08x rxbytes=%d %s %s %s" EIGHTBITS "\n",
+ csr,
+ (csr & 0x07ff0000) >> 16,
+ (csr & (1 << 15)) ? "enabled" : "disabled",
+ (csr & (1 << 11)) ? "DATA1" : "DATA0",
+ types[(csr & 0x700) >> 8],
+
+ /* iff type is control then print current direction */
+ (!(csr & 0x700))
+ ? ((csr & (1 << 7)) ? " IN" : " OUT")
+ : "",
+ (csr & (1 << 6)) ? " rxdatabk1" : "",
+ (csr & (1 << 5)) ? " forcestall" : "",
+ (csr & (1 << 4)) ? " txpktrdy" : "",
+
+ (csr & (1 << 3)) ? " stallsent" : "",
+ (csr & (1 << 2)) ? " rxsetup" : "",
+ (csr & (1 << 1)) ? " rxdatabk0" : "",
+ (csr & (1 << 0)) ? " txcomp" : "");
+ if (list_empty (&ep->queue))
+ seq_printf(s, "\t(queue empty)\n");
+
+ else list_for_each_entry (req, &ep->queue, queue) {
+ unsigned length = req->req.actual;
+
+ seq_printf(s, "\treq %p len %d/%d buf %p\n",
+ &req->req, length,
+ req->req.length, req->req.buf);
+ }
+ local_irq_restore(flags);
+}
+
+static void proc_irq_show(struct seq_file *s, const char *label, u32 mask)
+{
+ int i;
+
+ seq_printf(s, "%s %04x:%s%s" FOURBITS, label, mask,
+ (mask & (1 << 13)) ? " wakeup" : "",
+ (mask & (1 << 12)) ? " endbusres" : "",
+
+ (mask & (1 << 11)) ? " sofint" : "",
+ (mask & (1 << 10)) ? " extrsm" : "",
+ (mask & (1 << 9)) ? " rxrsm" : "",
+ (mask & (1 << 8)) ? " rxsusp" : "");
+ for (i = 0; i < 8; i++) {
+ if (mask & (1 << i))
+ seq_printf(s, " ep%d", i);
+ }
+ seq_printf(s, "\n");
+}
+
+static int proc_udc_show(struct seq_file *s, void *unused)
+{
+ struct at91_udc *udc = s->private;
+ struct at91_ep *ep;
+ u32 tmp;
+
+ seq_printf(s, "%s: version %s\n", driver_name, DRIVER_VERSION);
+
+ seq_printf(s, "vbus %s, pullup %s, %s powered%s, gadget %s\n\n",
+ udc->vbus ? "present" : "off",
+ udc->enabled
+ ? (udc->vbus ? "active" : "enabled")
+ : "disabled",
+ udc->selfpowered ? "self" : "VBUS",
+ udc->suspended ? ", suspended" : "",
+ udc->driver ? udc->driver->driver.name : "(none)");
+
+ /* don't access registers when interface isn't clocked */
+ if (!udc->clocked) {
+ seq_printf(s, "(not clocked)\n");
+ return 0;
+ }
+
+ tmp = at91_udp_read(AT91_UDP_FRM_NUM);
+ seq_printf(s, "frame %05x:%s%s frame=%d\n", tmp,
+ (tmp & AT91_UDP_FRM_OK) ? " ok" : "",
+ (tmp & AT91_UDP_FRM_ERR) ? " err" : "",
+ (tmp & AT91_UDP_NUM));
+
+ tmp = at91_udp_read(AT91_UDP_GLB_STAT);
+ seq_printf(s, "glbstate %02x:%s" FOURBITS "\n", tmp,
+ (tmp & AT91_UDP_RMWUPE) ? " rmwupe" : "",
+ (tmp & AT91_UDP_RSMINPR) ? " rsminpr" : "",
+ (tmp & AT91_UDP_ESR) ? " esr" : "",
+ (tmp & AT91_UDP_CONFG) ? " confg" : "",
+ (tmp & AT91_UDP_FADDEN) ? " fadden" : "");
+
+ tmp = at91_udp_read(AT91_UDP_FADDR);
+ seq_printf(s, "faddr %03x:%s fadd=%d\n", tmp,
+ (tmp & AT91_UDP_FEN) ? " fen" : "",
+ (tmp & AT91_UDP_FADD));
+
+ proc_irq_show(s, "imr ", at91_udp_read(AT91_UDP_IMR));
+ proc_irq_show(s, "isr ", at91_udp_read(AT91_UDP_ISR));
+
+ if (udc->enabled && udc->vbus) {
+ proc_ep_show(s, &udc->ep[0]);
+ list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) {
+ if (ep->desc)
+ proc_ep_show(s, ep);
+ }
+ }
+ return 0;
+}
+
+static int proc_udc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, proc_udc_show, PDE(inode)->data);
+}
+
+static struct file_operations proc_ops = {
+ .open = proc_udc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static void create_debug_file(struct at91_udc *udc)
+{
+ struct proc_dir_entry *pde;
+
+ pde = create_proc_entry (debug_filename, 0, NULL);
+ udc->pde = pde;
+ if (pde == NULL)
+ return;
+
+ pde->proc_fops = &proc_ops;
+ pde->data = udc;
+}
+
+static void remove_debug_file(struct at91_udc *udc)
+{
+ if (udc->pde)
+ remove_proc_entry(debug_filename, NULL);
+}
+
+#else
+
+static inline void create_debug_file(struct at91_udc *udc) {}
+static inline void remove_debug_file(struct at91_udc *udc) {}
+
+#endif
+
+
+/*-------------------------------------------------------------------------*/
+
+static void done(struct at91_ep *ep, struct at91_request *req, int status)
+{
+ unsigned stopped = ep->stopped;
+
+ list_del_init(&req->queue);
+ if (req->req.status == -EINPROGRESS)
+ req->req.status = status;
+ else
+ status = req->req.status;
+ if (status && status != -ESHUTDOWN)
+ VDBG("%s done %p, status %d\n", ep->ep.name, req, status);
+
+ ep->stopped = 1;
+ req->req.complete(&ep->ep, &req->req);
+ ep->stopped = stopped;
+
+ /* ep0 is always ready; other endpoints need a non-empty queue */
+ if (list_empty(&ep->queue) && ep->int_mask != (1 << 0))
+ at91_udp_write(AT91_UDP_IDR, ep->int_mask);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* bits indicating OUT fifo has data ready */
+#define RX_DATA_READY (AT91_UDP_RX_DATA_BK0 | AT91_UDP_RX_DATA_BK1)
+
+/*
+ * Endpoint FIFO CSR bits have a mix of bits, making it unsafe to just write
+ * back most of the value you just read (because of side effects, including
+ * bits that may change after reading and before writing).
+ *
+ * Except when changing a specific bit, always write values which:
+ * - clear SET_FX bits (setting them could change something)
+ * - set CLR_FX bits (clearing them could change something)
+ *
+ * There are also state bits like FORCESTALL, EPEDS, DIR, and EPTYPE
+ * that shouldn't normally be changed.
+ */
+#define SET_FX (AT91_UDP_TXPKTRDY)
+#define CLR_FX (RX_DATA_READY | AT91_UDP_RXSETUP | AT91_UDP_STALLSENT | AT91_UDP_TXCOMP)
+
+/* pull OUT packet data from the endpoint's fifo */
+static int read_fifo (struct at91_ep *ep, struct at91_request *req)
+{
+ u32 __iomem *creg = ep->creg;
+ u8 __iomem *dreg = ep->creg + (AT91_UDP_FDR(0) - AT91_UDP_CSR(0));
+ u32 csr;
+ u8 *buf;
+ unsigned int count, bufferspace, is_done;
+
+ buf = req->req.buf + req->req.actual;
+ bufferspace = req->req.length - req->req.actual;
+
+ /*
+ * there might be nothing to read if ep_queue() calls us,
+ * or if we already emptied both pingpong buffers
+ */
+rescan:
+ csr = __raw_readl(creg);
+ if ((csr & RX_DATA_READY) == 0)
+ return 0;
+
+ count = (csr & AT91_UDP_RXBYTECNT) >> 16;
+ if (count > ep->ep.maxpacket)
+ count = ep->ep.maxpacket;
+ if (count > bufferspace) {
+ DBG("%s buffer overflow\n", ep->ep.name);
+ req->req.status = -EOVERFLOW;
+ count = bufferspace;
+ }
+ __raw_readsb(dreg, buf, count);
+
+ /* release and swap pingpong mem bank */
+ csr |= CLR_FX;
+ if (ep->is_pingpong) {
+ if (ep->fifo_bank == 0) {
+ csr &= ~(SET_FX | AT91_UDP_RX_DATA_BK0);
+ ep->fifo_bank = 1;
+ } else {
+ csr &= ~(SET_FX | AT91_UDP_RX_DATA_BK1);
+ ep->fifo_bank = 0;
+ }
+ } else
+ csr &= ~(SET_FX | AT91_UDP_RX_DATA_BK0);
+ __raw_writel(csr, creg);
+
+ req->req.actual += count;
+ is_done = (count < ep->ep.maxpacket);
+ if (count == bufferspace)
+ is_done = 1;
+
+ PACKET("%s %p out/%d%s\n", ep->ep.name, &req->req, count,
+ is_done ? " (done)" : "");
+
+ /*
+ * avoid extra trips through IRQ logic for packets already in
+ * the fifo ... maybe preventing an extra (expensive) OUT-NAK
+ */
+ if (is_done)
+ done(ep, req, 0);
+ else if (ep->is_pingpong) {
+ bufferspace -= count;
+ buf += count;
+ goto rescan;
+ }
+
+ return is_done;
+}
+
+/* load fifo for an IN packet */
+static int write_fifo(struct at91_ep *ep, struct at91_request *req)
+{
+ u32 __iomem *creg = ep->creg;
+ u32 csr = __raw_readl(creg);
+ u8 __iomem *dreg = ep->creg + (AT91_UDP_FDR(0) - AT91_UDP_CSR(0));
+ unsigned total, count, is_last;
+
+ /*
+ * TODO: allow for writing two packets to the fifo ... that'll
+ * reduce the amount of IN-NAKing, but probably won't affect
+ * throughput much. (Unlike preventing OUT-NAKing!)
+ */
+
+ /*
+ * If ep_queue() calls us, the queue is empty and possibly in
+ * odd states like TXCOMP not yet cleared (we do it, saving at
+ * least one IRQ) or the fifo not yet being free. Those aren't
+ * issues normally (IRQ handler fast path).
+ */
+ if (unlikely(csr & (AT91_UDP_TXCOMP | AT91_UDP_TXPKTRDY))) {
+ if (csr & AT91_UDP_TXCOMP) {
+ csr |= CLR_FX;
+ csr &= ~(SET_FX | AT91_UDP_TXCOMP);
+ __raw_writel(csr, creg);
+ csr = __raw_readl(creg);
+ }
+ if (csr & AT91_UDP_TXPKTRDY)
+ return 0;
+ }
+
+ total = req->req.length - req->req.actual;
+ if (ep->ep.maxpacket < total) {
+ count = ep->ep.maxpacket;
+ is_last = 0;
+ } else {
+ count = total;
+ is_last = (count < ep->ep.maxpacket) || !req->req.zero;
+ }
+
+ /*
+ * Write the packet, maybe it's a ZLP.
+ *
+ * NOTE: incrementing req->actual before we receive the ACK means
+ * gadget driver IN bytecounts can be wrong in fault cases. That's
+ * fixable with PIO drivers like this one (save "count" here, and
+ * do the increment later on TX irq), but not for most DMA hardware.
+ *
+ * So all gadget drivers must accept that potential error. Some
+ * hardware supports precise fifo status reporting, letting them
+ * recover when the actual bytecount matters (e.g. for USB Test
+ * and Measurement Class devices).
+ */
+ __raw_writesb(dreg, req->req.buf + req->req.actual, count);
+ csr &= ~SET_FX;
+ csr |= CLR_FX | AT91_UDP_TXPKTRDY;
+ __raw_writel(csr, creg);
+ req->req.actual += count;
+
+ PACKET("%s %p in/%d%s\n", ep->ep.name, &req->req, count,
+ is_last ? " (done)" : "");
+ if (is_last)
+ done(ep, req, 0);
+ return is_last;
+}
+
+static void nuke(struct at91_ep *ep, int status)
+{
+ struct at91_request *req;
+
+ // terminer chaque requete dans la queue
+ ep->stopped = 1;
+ if (list_empty(&ep->queue))
+ return;
+
+ VDBG("%s %s\n", __FUNCTION__, ep->ep.name);
+ while (!list_empty(&ep->queue)) {
+ req = list_entry(ep->queue.next, struct at91_request, queue);
+ done(ep, req, status);
+ }
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int at91_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
+{
+ struct at91_ep *ep = container_of(_ep, struct at91_ep, ep);
+ struct at91_udc *dev = ep->udc;
+ u16 maxpacket;
+ u32 tmp;
+ unsigned long flags;
+
+ if (!_ep || !ep
+ || !desc || ep->desc
+ || _ep->name == ep0name
+ || desc->bDescriptorType != USB_DT_ENDPOINT
+ || (maxpacket = le16_to_cpu(desc->wMaxPacketSize)) == 0
+ || maxpacket > ep->maxpacket) {
+ DBG("bad ep or descriptor\n");
+ return -EINVAL;
+ }
+
+ if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
+ DBG("bogus device state\n");
+ return -ESHUTDOWN;
+ }
+
+ tmp = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+ switch (tmp) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ DBG("only one control endpoint\n");
+ return -EINVAL;
+ case USB_ENDPOINT_XFER_INT:
+ if (maxpacket > 64)
+ goto bogus_max;
+ break;
+ case USB_ENDPOINT_XFER_BULK:
+ switch (maxpacket) {
+ case 8:
+ case 16:
+ case 32:
+ case 64:
+ goto ok;
+ }
+bogus_max:
+ DBG("bogus maxpacket %d\n", maxpacket);
+ return -EINVAL;
+ case USB_ENDPOINT_XFER_ISOC:
+ if (!ep->is_pingpong) {
+ DBG("iso requires double buffering\n");
+ return -EINVAL;
+ }
+ break;
+ }
+
+ok:
+ local_irq_save(flags);
+
+ /* initialize endpoint to match this descriptor */
+ ep->is_in = (desc->bEndpointAddress & USB_DIR_IN) != 0;
+ ep->is_iso = (tmp == USB_ENDPOINT_XFER_ISOC);
+ ep->stopped = 0;
+ if (ep->is_in)
+ tmp |= 0x04;
+ tmp <<= 8;
+ tmp |= AT91_UDP_EPEDS;
+ __raw_writel(tmp, ep->creg);
+
+ ep->desc = desc;
+ ep->ep.maxpacket = maxpacket;
+
+ /*
+ * reset/init endpoint fifo. NOTE: leaves fifo_bank alone,
+ * since endpoint resets don't reset hw pingpong state.
+ */
+ at91_udp_write(AT91_UDP_RST_EP, ep->int_mask);
+ at91_udp_write(AT91_UDP_RST_EP, 0);
+
+ local_irq_restore(flags);
+ return 0;
+}
+
+static int at91_ep_disable (struct usb_ep * _ep)
+{
+ struct at91_ep *ep = container_of(_ep, struct at91_ep, ep);
+ unsigned long flags;
+
+ if (ep == &ep->udc->ep[0])
+ return -EINVAL;
+
+ local_irq_save(flags);
+
+ nuke(ep, -ESHUTDOWN);
+
+ /* restore the endpoint's pristine config */
+ ep->desc = NULL;
+ ep->ep.maxpacket = ep->maxpacket;
+
+ /* reset fifos and endpoint */
+ if (ep->udc->clocked) {
+ at91_udp_write(AT91_UDP_RST_EP, ep->int_mask);
+ at91_udp_write(AT91_UDP_RST_EP, 0);
+ __raw_writel(0, ep->creg);
+ }
+
+ local_irq_restore(flags);
+ return 0;
+}
+
+/*
+ * this is a PIO-only driver, so there's nothing
+ * interesting for request or buffer allocation.
+ */
+
+static struct usb_request *at91_ep_alloc_request (struct usb_ep *_ep, unsigned int gfp_flags)
+{
+ struct at91_request *req;
+
+ req = kcalloc(1, sizeof (struct at91_request), SLAB_KERNEL);
+ if (!req)
+ return NULL;
+
+ INIT_LIST_HEAD(&req->queue);
+ return &req->req;
+}
+
+static void at91_ep_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+ struct at91_request *req;
+
+ req = container_of(_req, struct at91_request, req);
+ BUG_ON(!list_empty(&req->queue));
+ kfree(req);
+}
+
+static void *at91_ep_alloc_buffer(
+ struct usb_ep *_ep,
+ unsigned bytes,
+ dma_addr_t *dma,
+ gfp_t gfp_flags)
+{
+ *dma = ~0;
+ return kmalloc(bytes, gfp_flags);
+}
+
+static void at91_ep_free_buffer(
+ struct usb_ep *ep,
+ void *buf,
+ dma_addr_t dma,
+ unsigned bytes)
+{
+ kfree(buf);
+}
+
+static int at91_ep_queue(struct usb_ep *_ep,
+ struct usb_request *_req, gfp_t gfp_flags)
+{
+ struct at91_request *req;
+ struct at91_ep *ep;
+ struct at91_udc *dev;
+ int status;
+ unsigned long flags;
+
+ req = container_of(_req, struct at91_request, req);
+ ep = container_of(_ep, struct at91_ep, ep);
+
+ if (!_req || !_req->complete
+ || !_req->buf || !list_empty(&req->queue)) {
+ DBG("invalid request\n");
+ return -EINVAL;
+ }
+
+ if (!_ep || (!ep->desc && ep->ep.name != ep0name)) {
+ DBG("invalid ep\n");
+ return -EINVAL;
+ }
+
+ dev = ep->udc;
+
+ if (!dev || !dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
+ DBG("invalid device\n");
+ return -EINVAL;
+ }
+
+ _req->status = -EINPROGRESS;
+ _req->actual = 0;
+
+ local_irq_save(flags);
+
+ /* try to kickstart any empty and idle queue */
+ if (list_empty(&ep->queue) && !ep->stopped) {
+ int is_ep0;
+
+ /*
+ * If this control request has a non-empty DATA stage, this
+ * will start that stage. It works just like a non-control
+ * request (until the status stage starts, maybe early).
+ *
+ * If the data stage is empty, then this starts a successful
+ * IN/STATUS stage. (Unsuccessful ones use set_halt.)
+ */
+ is_ep0 = (ep->ep.name == ep0name);
+ if (is_ep0) {
+ u32 tmp;
+
+ if (!dev->req_pending) {
+ status = -EINVAL;
+ goto done;
+ }
+
+ /*
+ * defer changing CONFG until after the gadget driver
+ * reconfigures the endpoints.
+ */
+ if (dev->wait_for_config_ack) {
+ tmp = at91_udp_read(AT91_UDP_GLB_STAT);
+ tmp ^= AT91_UDP_CONFG;
+ VDBG("toggle config\n");
+ at91_udp_write(AT91_UDP_GLB_STAT, tmp);
+ }
+ if (req->req.length == 0) {
+ep0_in_status:
+ PACKET("ep0 in/status\n");
+ status = 0;
+ tmp = __raw_readl(ep->creg);
+ tmp &= ~SET_FX;
+ tmp |= CLR_FX | AT91_UDP_TXPKTRDY;
+ __raw_writel(tmp, ep->creg);
+ dev->req_pending = 0;
+ goto done;
+ }
+ }
+
+ if (ep->is_in)
+ status = write_fifo(ep, req);
+ else {
+ status = read_fifo(ep, req);
+
+ /* IN/STATUS stage is otherwise triggered by irq */
+ if (status && is_ep0)
+ goto ep0_in_status;
+ }
+ } else
+ status = 0;
+
+ if (req && !status) {
+ list_add_tail (&req->queue, &ep->queue);
+ at91_udp_write(AT91_UDP_IER, ep->int_mask);
+ }
+done:
+ local_irq_restore(flags);
+ return (status < 0) ? status : 0;
+}
+
+static int at91_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+ struct at91_ep *ep;
+ struct at91_request *req;
+
+ ep = container_of(_ep, struct at91_ep, ep);
+ if (!_ep || ep->ep.name == ep0name)
+ return -EINVAL;
+
+ /* make sure it's actually queued on this endpoint */
+ list_for_each_entry (req, &ep->queue, queue) {
+ if (&req->req == _req)
+ break;
+ }
+ if (&req->req != _req)
+ return -EINVAL;
+
+ done(ep, req, -ECONNRESET);
+ return 0;
+}
+
+static int at91_ep_set_halt(struct usb_ep *_ep, int value)
+{
+ struct at91_ep *ep = container_of(_ep, struct at91_ep, ep);
+ u32 __iomem *creg;
+ u32 csr;
+ unsigned long flags;
+ int status = 0;
+
+ if (!_ep || ep->is_iso || !ep->udc->clocked)
+ return -EINVAL;
+
+ creg = ep->creg;
+ local_irq_save(flags);
+
+ csr = __raw_readl(creg);
+
+ /*
+ * fail with still-busy IN endpoints, ensuring correct sequencing
+ * of data tx then stall. note that the fifo rx bytecount isn't
+ * completely accurate as a tx bytecount.
+ */
+ if (ep->is_in && (!list_empty(&ep->queue) || (csr >> 16) != 0))
+ status = -EAGAIN;
+ else {
+ csr |= CLR_FX;
+ csr &= ~SET_FX;
+ if (value) {
+ csr |= AT91_UDP_FORCESTALL;
+ VDBG("halt %s\n", ep->ep.name);
+ } else {
+ at91_udp_write(AT91_UDP_RST_EP, ep->int_mask);
+ at91_udp_write(AT91_UDP_RST_EP, 0);
+ csr &= ~AT91_UDP_FORCESTALL;
+ }
+ __raw_writel(csr, creg);
+ }
+
+ local_irq_restore(flags);
+ return status;
+}
+
+static struct usb_ep_ops at91_ep_ops = {
+ .enable = at91_ep_enable,
+ .disable = at91_ep_disable,
+ .alloc_request = at91_ep_alloc_request,
+ .free_request = at91_ep_free_request,
+ .alloc_buffer = at91_ep_alloc_buffer,
+ .free_buffer = at91_ep_free_buffer,
+ .queue = at91_ep_queue,
+ .dequeue = at91_ep_dequeue,
+ .set_halt = at91_ep_set_halt,
+ // there's only imprecise fifo status reporting
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int at91_get_frame(struct usb_gadget *gadget)
+{
+ if (!to_udc(gadget)->clocked)
+ return -EINVAL;
+ return at91_udp_read(AT91_UDP_FRM_NUM) & AT91_UDP_NUM;
+}
+
+static int at91_wakeup(struct usb_gadget *gadget)
+{
+ struct at91_udc *udc = to_udc(gadget);
+ u32 glbstate;
+ int status = -EINVAL;
+ unsigned long flags;
+
+ DBG("%s\n", __FUNCTION__ );
+ local_irq_save(flags);
+
+ if (!udc->clocked || !udc->suspended)
+ goto done;
+
+ /* NOTE: some "early versions" handle ESR differently ... */
+
+ glbstate = at91_udp_read(AT91_UDP_GLB_STAT);
+ if (!(glbstate & AT91_UDP_ESR))
+ goto done;
+ glbstate |= AT91_UDP_ESR;
+ at91_udp_write(AT91_UDP_GLB_STAT, glbstate);
+
+done:
+ local_irq_restore(flags);
+ return status;
+}
+
+/* reinit == restore inital software state */
+static void udc_reinit(struct at91_udc *udc)
+{
+ u32 i;
+
+ INIT_LIST_HEAD(&udc->gadget.ep_list);
+ INIT_LIST_HEAD(&udc->gadget.ep0->ep_list);
+
+ for (i = 0; i < NUM_ENDPOINTS; i++) {
+ struct at91_ep *ep = &udc->ep[i];
+
+ if (i != 0)
+ list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
+ ep->desc = NULL;
+ ep->stopped = 0;
+ ep->fifo_bank = 0;
+ ep->ep.maxpacket = ep->maxpacket;
+ // initialiser une queue par endpoint
+ INIT_LIST_HEAD(&ep->queue);
+ }
+}
+
+static void stop_activity(struct at91_udc *udc)
+{
+ struct usb_gadget_driver *driver = udc->driver;
+ int i;
+
+ if (udc->gadget.speed == USB_SPEED_UNKNOWN)
+ driver = NULL;
+ udc->gadget.speed = USB_SPEED_UNKNOWN;
+
+ for (i = 0; i < NUM_ENDPOINTS; i++) {
+ struct at91_ep *ep = &udc->ep[i];
+ ep->stopped = 1;
+ nuke(ep, -ESHUTDOWN);
+ }
+ if (driver)
+ driver->disconnect(&udc->gadget);
+
+ udc_reinit(udc);
+}
+
+static void clk_on(struct at91_udc *udc)
+{
+ if (udc->clocked)
+ return;
+ udc->clocked = 1;
+ clk_enable(udc->iclk);
+ clk_enable(udc->fclk);
+}
+
+static void clk_off(struct at91_udc *udc)
+{
+ if (!udc->clocked)
+ return;
+ udc->clocked = 0;
+ udc->gadget.speed = USB_SPEED_UNKNOWN;
+ clk_disable(udc->iclk);
+ clk_disable(udc->fclk);
+}
+
+/*
+ * activate/deactivate link with host; minimize power usage for
+ * inactive links by cutting clocks and transceiver power.
+ */
+static void pullup(struct at91_udc *udc, int is_on)
+{
+ if (!udc->enabled || !udc->vbus)
+ is_on = 0;
+ DBG("%sactive\n", is_on ? "" : "in");
+ if (is_on) {
+ clk_on(udc);
+ at91_udp_write(AT91_UDP_TXVC, 0);
+ at91_set_gpio_value(udc->board.pullup_pin, 1);
+ } else {
+ stop_activity(udc);
+ at91_udp_write(AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
+ at91_set_gpio_value(udc->board.pullup_pin, 0);
+ clk_off(udc);
+
+ // REVISIT: with transceiver disabled, will D- float
+ // so that a host would falsely detect a device?
+ }
+}
+
+/* vbus is here! turn everything on that's ready */
+static int at91_vbus_session(struct usb_gadget *gadget, int is_active)
+{
+ struct at91_udc *udc = to_udc(gadget);
+ unsigned long flags;
+
+ // VDBG("vbus %s\n", is_active ? "on" : "off");
+ local_irq_save(flags);
+ udc->vbus = (is_active != 0);
+ pullup(udc, is_active);
+ local_irq_restore(flags);
+ return 0;
+}
+
+static int at91_pullup(struct usb_gadget *gadget, int is_on)
+{
+ struct at91_udc *udc = to_udc(gadget);
+ unsigned long flags;
+
+ local_irq_save(flags);
+ udc->enabled = is_on = !!is_on;
+ pullup(udc, is_on);
+ local_irq_restore(flags);
+ return 0;
+}
+
+static int at91_set_selfpowered(struct usb_gadget *gadget, int is_on)
+{
+ struct at91_udc *udc = to_udc(gadget);
+ unsigned long flags;
+
+ local_irq_save(flags);
+ udc->selfpowered = (is_on != 0);
+ local_irq_restore(flags);
+ return 0;
+}
+
+static const struct usb_gadget_ops at91_udc_ops = {
+ .get_frame = at91_get_frame,
+ .wakeup = at91_wakeup,
+ .set_selfpowered = at91_set_selfpowered,
+ .vbus_session = at91_vbus_session,
+ .pullup = at91_pullup,
+
+ /*
+ * VBUS-powered devices may also also want to support bigger
+ * power budgets after an appropriate SET_CONFIGURATION.
+ */
+ // .vbus_power = at91_vbus_power,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int handle_ep(struct at91_ep *ep)
+{
+ struct at91_request *req;
+ u32 __iomem *creg = ep->creg;
+ u32 csr = __raw_readl(creg);
+
+ if (!list_empty(&ep->queue))
+ req = list_entry(ep->queue.next,
+ struct at91_request, queue);
+ else
+ req = NULL;
+
+ if (ep->is_in) {
+ if (csr & (AT91_UDP_STALLSENT | AT91_UDP_TXCOMP)) {
+ csr |= CLR_FX;
+ csr &= ~(SET_FX | AT91_UDP_STALLSENT | AT91_UDP_TXCOMP);
+ __raw_writel(csr, creg);
+ }
+ if (req)
+ return write_fifo(ep, req);
+
+ } else {
+ if (csr & AT91_UDP_STALLSENT) {
+ /* STALLSENT bit == ISOERR */
+ if (ep->is_iso && req)
+ req->req.status = -EILSEQ;
+ csr |= CLR_FX;
+ csr &= ~(SET_FX | AT91_UDP_STALLSENT);
+ __raw_writel(csr, creg);
+ csr = __raw_readl(creg);
+ }
+ if (req && (csr & RX_DATA_READY))
+ return read_fifo(ep, req);
+ }
+ return 0;
+}
+
+union setup {
+ u8 raw[8];
+ struct usb_ctrlrequest r;
+};
+
+static void handle_setup(struct at91_udc *udc, struct at91_ep *ep, u32 csr)
+{
+ u32 __iomem *creg = ep->creg;
+ u8 __iomem *dreg = ep->creg + (AT91_UDP_FDR(0) - AT91_UDP_CSR(0));
+ unsigned rxcount, i = 0;
+ u32 tmp;
+ union setup pkt;
+ int status = 0;
+
+ /* read and ack SETUP; hard-fail for bogus packets */
+ rxcount = (csr & AT91_UDP_RXBYTECNT) >> 16;
+ if (likely(rxcount == 8)) {
+ while (rxcount--)
+ pkt.raw[i++] = __raw_readb(dreg);
+ if (pkt.r.bRequestType & USB_DIR_IN) {
+ csr |= AT91_UDP_DIR;
+ ep->is_in = 1;
+ } else {
+ csr &= ~AT91_UDP_DIR;
+ ep->is_in = 0;
+ }
+ } else {
+ // REVISIT this happens sometimes under load; why??
+ ERR("SETUP len %d, csr %08x\n", rxcount, csr);
+ status = -EINVAL;
+ }
+ csr |= CLR_FX;
+ csr &= ~(SET_FX | AT91_UDP_RXSETUP);
+ __raw_writel(csr, creg);
+ udc->wait_for_addr_ack = 0;
+ udc->wait_for_config_ack = 0;
+ ep->stopped = 0;
+ if (unlikely(status != 0))
+ goto stall;
+
+#define w_index le16_to_cpu(pkt.r.wIndex)
+#define w_value le16_to_cpu(pkt.r.wValue)
+#define w_length le16_to_cpu(pkt.r.wLength)
+
+ VDBG("SETUP %02x.%02x v%04x i%04x l%04x\n",
+ pkt.r.bRequestType, pkt.r.bRequest,
+ w_value, w_index, w_length);
+
+ /*
+ * A few standard requests get handled here, ones that touch
+ * hardware ... notably for device and endpoint features.
+ */
+ udc->req_pending = 1;
+ csr = __raw_readl(creg);
+ csr |= CLR_FX;
+ csr &= ~SET_FX;
+ switch ((pkt.r.bRequestType << 8) | pkt.r.bRequest) {
+
+ case ((USB_TYPE_STANDARD|USB_RECIP_DEVICE) << 8)
+ | USB_REQ_SET_ADDRESS:
+ __raw_writel(csr | AT91_UDP_TXPKTRDY, creg);
+ udc->addr = w_value;
+ udc->wait_for_addr_ack = 1;
+ udc->req_pending = 0;
+ /* FADDR is set later, when we ack host STATUS */
+ return;
+
+ case ((USB_TYPE_STANDARD|USB_RECIP_DEVICE) << 8)
+ | USB_REQ_SET_CONFIGURATION:
+ tmp = at91_udp_read(AT91_UDP_GLB_STAT) & AT91_UDP_CONFG;
+ if (pkt.r.wValue)
+ udc->wait_for_config_ack = (tmp == 0);
+ else
+ udc->wait_for_config_ack = (tmp != 0);
+ if (udc->wait_for_config_ack)
+ VDBG("wait for config\n");
+ /* CONFG is toggled later, if gadget driver succeeds */
+ break;
+
+ /*
+ * Hosts may set or clear remote wakeup status, and
+ * devices may report they're VBUS powered.
+ */
+ case ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE) << 8)
+ | USB_REQ_GET_STATUS:
+ tmp = (udc->selfpowered << USB_DEVICE_SELF_POWERED);
+ if (at91_udp_read(AT91_UDP_GLB_STAT) & AT91_UDP_ESR)
+ tmp |= (1 << USB_DEVICE_REMOTE_WAKEUP);
+ PACKET("get device status\n");
+ __raw_writeb(tmp, dreg);
+ __raw_writeb(0, dreg);
+ goto write_in;
+ /* then STATUS starts later, automatically */
+ case ((USB_TYPE_STANDARD|USB_RECIP_DEVICE) << 8)
+ | USB_REQ_SET_FEATURE:
+ if (w_value != USB_DEVICE_REMOTE_WAKEUP)
+ goto stall;
+ tmp = at91_udp_read(AT91_UDP_GLB_STAT);
+ tmp |= AT91_UDP_ESR;
+ at91_udp_write(AT91_UDP_GLB_STAT, tmp);
+ goto succeed;
+ case ((USB_TYPE_STANDARD|USB_RECIP_DEVICE) << 8)
+ | USB_REQ_CLEAR_FEATURE:
+ if (w_value != USB_DEVICE_REMOTE_WAKEUP)
+ goto stall;
+ tmp = at91_udp_read(AT91_UDP_GLB_STAT);
+ tmp &= ~AT91_UDP_ESR;
+ at91_udp_write(AT91_UDP_GLB_STAT, tmp);
+ goto succeed;
+
+ /*
+ * Interfaces have no feature settings; this is pretty useless.
+ * we won't even insist the interface exists...
+ */
+ case ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE) << 8)
+ | USB_REQ_GET_STATUS:
+ PACKET("get interface status\n");
+ __raw_writeb(0, dreg);
+ __raw_writeb(0, dreg);
+ goto write_in;
+ /* then STATUS starts later, automatically */
+ case ((USB_TYPE_STANDARD|USB_RECIP_INTERFACE) << 8)
+ | USB_REQ_SET_FEATURE:
+ case ((USB_TYPE_STANDARD|USB_RECIP_INTERFACE) << 8)
+ | USB_REQ_CLEAR_FEATURE:
+ goto stall;
+
+ /*
+ * Hosts may clear bulk/intr endpoint halt after the gadget
+ * driver sets it (not widely used); or set it (for testing)
+ */
+ case ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_ENDPOINT) << 8)
+ | USB_REQ_GET_STATUS:
+ tmp = w_index & USB_ENDPOINT_NUMBER_MASK;
+ ep = &udc->ep[tmp];
+ if (tmp > NUM_ENDPOINTS || (tmp && !ep->desc))
+ goto stall;
+
+ if (tmp) {
+ if ((w_index & USB_DIR_IN)) {
+ if (!ep->is_in)
+ goto stall;
+ } else if (ep->is_in)
+ goto stall;
+ }
+ PACKET("get %s status\n", ep->ep.name);
+ if (__raw_readl(ep->creg) & AT91_UDP_FORCESTALL)
+ tmp = (1 << USB_ENDPOINT_HALT);
+ else
+ tmp = 0;
+ __raw_writeb(tmp, dreg);
+ __raw_writeb(0, dreg);
+ goto write_in;
+ /* then STATUS starts later, automatically */
+ case ((USB_TYPE_STANDARD|USB_RECIP_ENDPOINT) << 8)
+ | USB_REQ_SET_FEATURE:
+ tmp = w_index & USB_ENDPOINT_NUMBER_MASK;
+ ep = &udc->ep[tmp];
+ if (w_value != USB_ENDPOINT_HALT || tmp > NUM_ENDPOINTS)
+ goto stall;
+ if (!ep->desc || ep->is_iso)
+ goto stall;
+ if ((w_index & USB_DIR_IN)) {
+ if (!ep->is_in)
+ goto stall;
+ } else if (ep->is_in)
+ goto stall;
+
+ tmp = __raw_readl(ep->creg);
+ tmp &= ~SET_FX;
+ tmp |= CLR_FX | AT91_UDP_FORCESTALL;
+ __raw_writel(tmp, ep->creg);
+ goto succeed;
+ case ((USB_TYPE_STANDARD|USB_RECIP_ENDPOINT) << 8)
+ | USB_REQ_CLEAR_FEATURE:
+ tmp = w_index & USB_ENDPOINT_NUMBER_MASK;
+ ep = &udc->ep[tmp];
+ if (w_value != USB_ENDPOINT_HALT || tmp > NUM_ENDPOINTS)
+ goto stall;
+ if (tmp == 0)
+ goto succeed;
+ if (!ep->desc || ep->is_iso)
+ goto stall;
+ if ((w_index & USB_DIR_IN)) {
+ if (!ep->is_in)
+ goto stall;
+ } else if (ep->is_in)
+ goto stall;
+
+ at91_udp_write(AT91_UDP_RST_EP, ep->int_mask);
+ at91_udp_write(AT91_UDP_RST_EP, 0);
+ tmp = __raw_readl(ep->creg);
+ tmp |= CLR_FX;
+ tmp &= ~(SET_FX | AT91_UDP_FORCESTALL);
+ __raw_writel(tmp, ep->creg);
+ if (!list_empty(&ep->queue))
+ handle_ep(ep);
+ goto succeed;
+ }
+
+#undef w_value
+#undef w_index
+#undef w_length
+
+ /* pass request up to the gadget driver */
+ status = udc->driver->setup(&udc->gadget, &pkt.r);
+ if (status < 0) {
+stall:
+ VDBG("req %02x.%02x protocol STALL; stat %d\n",
+ pkt.r.bRequestType, pkt.r.bRequest, status);
+ csr |= AT91_UDP_FORCESTALL;
+ __raw_writel(csr, creg);
+ udc->req_pending = 0;
+ }
+ return;
+
+succeed:
+ /* immediate successful (IN) STATUS after zero length DATA */
+ PACKET("ep0 in/status\n");
+write_in:
+ csr |= AT91_UDP_TXPKTRDY;
+ __raw_writel(csr, creg);
+ udc->req_pending = 0;
+ return;
+}
+
+static void handle_ep0(struct at91_udc *udc)
+{
+ struct at91_ep *ep0 = &udc->ep[0];
+ u32 __iomem *creg = ep0->creg;
+ u32 csr = __raw_readl(creg);
+ struct at91_request *req;
+
+ if (unlikely(csr & AT91_UDP_STALLSENT)) {
+ nuke(ep0, -EPROTO);
+ udc->req_pending = 0;
+ csr |= CLR_FX;
+ csr &= ~(SET_FX | AT91_UDP_STALLSENT | AT91_UDP_FORCESTALL);
+ __raw_writel(csr, creg);
+ VDBG("ep0 stalled\n");
+ csr = __raw_readl(creg);
+ }
+ if (csr & AT91_UDP_RXSETUP) {
+ nuke(ep0, 0);
+ udc->req_pending = 0;
+ handle_setup(udc, ep0, csr);
+ return;
+ }
+
+ if (list_empty(&ep0->queue))
+ req = NULL;
+ else
+ req = list_entry(ep0->queue.next, struct at91_request, queue);
+
+ /* host ACKed an IN packet that we sent */
+ if (csr & AT91_UDP_TXCOMP) {
+ csr |= CLR_FX;
+ csr &= ~(SET_FX | AT91_UDP_TXCOMP);
+
+ /* write more IN DATA? */
+ if (req && ep0->is_in) {
+ if (handle_ep(ep0))
+ udc->req_pending = 0;
+
+ /*
+ * Ack after:
+ * - last IN DATA packet (including GET_STATUS)
+ * - IN/STATUS for OUT DATA
+ * - IN/STATUS for any zero-length DATA stage
+ * except for the IN DATA case, the host should send
+ * an OUT status later, which we'll ack.
+ */
+ } else {
+ udc->req_pending = 0;
+ __raw_writel(csr, creg);
+
+ /*
+ * SET_ADDRESS takes effect only after the STATUS
+ * (to the original address) gets acked.
+ */
+ if (udc->wait_for_addr_ack) {
+ u32 tmp;
+
+ at91_udp_write(AT91_UDP_FADDR, AT91_UDP_FEN | udc->addr);
+ tmp = at91_udp_read(AT91_UDP_GLB_STAT);
+ tmp &= ~AT91_UDP_FADDEN;
+ if (udc->addr)
+ tmp |= AT91_UDP_FADDEN;
+ at91_udp_write(AT91_UDP_GLB_STAT, tmp);
+
+ udc->wait_for_addr_ack = 0;
+ VDBG("address %d\n", udc->addr);
+ }
+ }
+ }
+
+ /* OUT packet arrived ... */
+ else if (csr & AT91_UDP_RX_DATA_BK0) {
+ csr |= CLR_FX;
+ csr &= ~(SET_FX | AT91_UDP_RX_DATA_BK0);
+
+ /* OUT DATA stage */
+ if (!ep0->is_in) {
+ if (req) {
+ if (handle_ep(ep0)) {
+ /* send IN/STATUS */
+ PACKET("ep0 in/status\n");
+ csr = __raw_readl(creg);
+ csr &= ~SET_FX;
+ csr |= CLR_FX | AT91_UDP_TXPKTRDY;
+ __raw_writel(csr, creg);
+ udc->req_pending = 0;
+ }
+ } else if (udc->req_pending) {
+ /*
+ * AT91 hardware has a hard time with this
+ * "deferred response" mode for control-OUT
+ * transfers. (For control-IN it's fine.)
+ *
+ * The normal solution leaves OUT data in the
+ * fifo until the gadget driver is ready.
+ * We couldn't do that here without disabling
+ * the IRQ that tells about SETUP packets,
+ * e.g. when the host gets impatient...
+ *
+ * Working around it by copying into a buffer
+ * would almost be a non-deferred response,
+ * except that it wouldn't permit reliable
+ * stalling of the request. Instead, demand
+ * that gadget drivers not use this mode.
+ */
+ DBG("no control-OUT deferred responses!\n");
+ __raw_writel(csr | AT91_UDP_FORCESTALL, creg);
+ udc->req_pending = 0;
+ }
+
+ /* STATUS stage for control-IN; ack. */
+ } else {
+ PACKET("ep0 out/status ACK\n");
+ __raw_writel(csr, creg);
+
+ /* "early" status stage */
+ if (req)
+ done(ep0, req, 0);
+ }
+ }
+}
+
+static irqreturn_t at91_udc_irq (int irq, void *_udc, struct pt_regs *r)
+{
+ struct at91_udc *udc = _udc;
+ u32 rescans = 5;
+
+ while (rescans--) {
+ u32 status = at91_udp_read(AT91_UDP_ISR);
+
+ status &= at91_udp_read(AT91_UDP_IMR);
+ if (!status)
+ break;
+
+ /* USB reset irq: not maskable */
+ if (status & AT91_UDP_ENDBUSRES) {
+ at91_udp_write(AT91_UDP_IDR, ~MINIMUS_INTERRUPTUS);
+ at91_udp_write(AT91_UDP_IER, MINIMUS_INTERRUPTUS);
+ /* Atmel code clears this irq twice */
+ at91_udp_write(AT91_UDP_ICR, AT91_UDP_ENDBUSRES);
+ at91_udp_write(AT91_UDP_ICR, AT91_UDP_ENDBUSRES);
+ VDBG("end bus reset\n");
+ udc->addr = 0;
+ stop_activity(udc);
+
+ /* enable ep0 */
+ at91_udp_write(AT91_UDP_CSR(0), AT91_UDP_EPEDS | AT91_UDP_EPTYPE_CTRL);
+ udc->gadget.speed = USB_SPEED_FULL;
+ udc->suspended = 0;
+ at91_udp_write(AT91_UDP_IER, AT91_UDP_EP(0));
+
+ /*
+ * NOTE: this driver keeps clocks off unless the
+ * USB host is present. That saves power, and also
+ * eliminates IRQs (reset, resume, suspend) that can
+ * otherwise flood from the controller. If your
+ * board doesn't support VBUS detection, suspend and
+ * resume irq logic may need more attention...
+ */
+
+ /* host initiated suspend (3+ms bus idle) */
+ } else if (status & AT91_UDP_RXSUSP) {
+ at91_udp_write(AT91_UDP_IDR, AT91_UDP_RXSUSP);
+ at91_udp_write(AT91_UDP_IER, AT91_UDP_RXRSM);
+ at91_udp_write(AT91_UDP_ICR, AT91_UDP_RXSUSP);
+ // VDBG("bus suspend\n");
+ if (udc->suspended)
+ continue;
+ udc->suspended = 1;
+
+ /*
+ * NOTE: when suspending a VBUS-powered device, the
+ * gadget driver should switch into slow clock mode
+ * and then into standby to avoid drawing more than
+ * 500uA power (2500uA for some high-power configs).
+ */
+ if (udc->driver && udc->driver->suspend)
+ udc->driver->suspend(&udc->gadget);
+
+ /* host initiated resume */
+ } else if (status & AT91_UDP_RXRSM) {
+ at91_udp_write(AT91_UDP_IDR, AT91_UDP_RXRSM);
+ at91_udp_write(AT91_UDP_IER, AT91_UDP_RXSUSP);
+ at91_udp_write(AT91_UDP_ICR, AT91_UDP_RXRSM);
+ // VDBG("bus resume\n");
+ if (!udc->suspended)
+ continue;
+ udc->suspended = 0;
+
+ /*
+ * NOTE: for a VBUS-powered device, the gadget driver
+ * would normally want to switch out of slow clock
+ * mode into normal mode.
+ */
+ if (udc->driver && udc->driver->resume)
+ udc->driver->resume(&udc->gadget);
+
+ /* endpoint IRQs are cleared by handling them */
+ } else {
+ int i;
+ unsigned mask = 1;
+ struct at91_ep *ep = &udc->ep[1];
+
+ if (status & mask)
+ handle_ep0(udc);
+ for (i = 1; i < NUM_ENDPOINTS; i++) {
+ mask <<= 1;
+ if (status & mask)
+ handle_ep(ep);
+ ep++;
+ }
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static struct at91_udc controller = {
+ .gadget = {
+ .ops = &at91_udc_ops,
+ .ep0 = &controller.ep[0].ep,
+ .name = driver_name,
+ .dev = {
+ .bus_id = "gadget"
+ }
+ },
+ .ep[0] = {
+ .ep = {
+ .name = ep0name,
+ .ops = &at91_ep_ops,
+ },
+ .udc = &controller,
+ .maxpacket = 8,
+ .creg = (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(0)),
+ .int_mask = 1 << 0,
+ },
+ .ep[1] = {
+ .ep = {
+ .name = "ep1",
+ .ops = &at91_ep_ops,
+ },
+ .udc = &controller,
+ .is_pingpong = 1,
+ .maxpacket = 64,
+ .creg = (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(1)),
+ .int_mask = 1 << 1,
+ },
+ .ep[2] = {
+ .ep = {
+ .name = "ep2",
+ .ops = &at91_ep_ops,
+ },
+ .udc = &controller,
+ .is_pingpong = 1,
+ .maxpacket = 64,
+ .creg = (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(2)),
+ .int_mask = 1 << 2,
+ },
+ .ep[3] = {
+ .ep = {
+ /* could actually do bulk too */
+ .name = "ep3-int",
+ .ops = &at91_ep_ops,
+ },
+ .udc = &controller,
+ .maxpacket = 8,
+ .creg = (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(3)),
+ .int_mask = 1 << 3,
+ },
+ .ep[4] = {
+ .ep = {
+ .name = "ep4",
+ .ops = &at91_ep_ops,
+ },
+ .udc = &controller,
+ .is_pingpong = 1,
+ .maxpacket = 256,
+ .creg = (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(4)),
+ .int_mask = 1 << 4,
+ },
+ .ep[5] = {
+ .ep = {
+ .name = "ep5",
+ .ops = &at91_ep_ops,
+ },
+ .udc = &controller,
+ .is_pingpong = 1,
+ .maxpacket = 256,
+ .creg = (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(5)),
+ .int_mask = 1 << 5,
+ },
+ /* ep6 and ep7 are also reserved */
+};
+
+static irqreturn_t at91_vbus_irq(int irq, void *_udc, struct pt_regs *r)
+{
+ struct at91_udc *udc = _udc;
+ unsigned value;
+
+ /* vbus needs at least brief debouncing */
+ udelay(10);
+ value = at91_get_gpio_value(udc->board.vbus_pin);
+ if (value != udc->vbus)
+ at91_vbus_session(&udc->gadget, value);
+
+ return IRQ_HANDLED;
+}
+
+int usb_gadget_register_driver (struct usb_gadget_driver *driver)
+{
+ struct at91_udc *udc = &controller;
+ int retval;
+
+ if (!driver
+ || driver->speed != USB_SPEED_FULL
+ || !driver->bind
+ || !driver->unbind
+ || !driver->setup) {
+ DBG("bad parameter.\n");
+ return -EINVAL;
+ }
+
+ if (udc->driver) {
+ DBG("UDC already has a gadget driver\n");
+ return -EBUSY;
+ }
+
+ udc->driver = driver;
+ udc->gadget.dev.driver = &driver->driver;
+ udc->gadget.dev.driver_data = &driver->driver;
+ udc->enabled = 1;
+ udc->selfpowered = 1;
+
+ retval = driver->bind(&udc->gadget);
+ if (retval) {
+ DBG("driver->bind() returned %d\n", retval);
+ udc->driver = NULL;
+ return retval;
+ }
+
+ local_irq_disable();
+ pullup(udc, 1);
+ local_irq_enable();
+
+ DBG("bound to %s\n", driver->driver.name);
+ return 0;
+}
+EXPORT_SYMBOL (usb_gadget_register_driver);
+
+int usb_gadget_unregister_driver (struct usb_gadget_driver *driver)
+{
+ struct at91_udc *udc = &controller;
+
+ if (!driver || driver != udc->driver)
+ return -EINVAL;
+
+ local_irq_disable();
+ udc->enabled = 0;
+ pullup(udc, 0);
+ local_irq_enable();
+
+ driver->unbind(&udc->gadget);
+ udc->driver = NULL;
+
+ DBG("unbound from %s\n", driver->driver.name);
+ return 0;
+}
+EXPORT_SYMBOL (usb_gadget_unregister_driver);
+
+/*-------------------------------------------------------------------------*/
+
+static void at91udc_shutdown(struct platform_device *dev)
+{
+ /* force disconnect on reboot */
+ pullup(platform_get_drvdata(dev), 0);
+}
+
+static int __devinit at91udc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct at91_udc *udc;
+ int retval;
+
+ if (!dev->platform_data) {
+ /* small (so we copy it) but critical! */
+ DBG("missing platform_data\n");
+ return -ENODEV;
+ }
+
+ if (!request_mem_region(AT91_BASE_UDP, SZ_16K, driver_name)) {
+ DBG("someone's using UDC memory\n");
+ return -EBUSY;
+ }
+
+ /* init software state */
+ udc = &controller;
+ udc->gadget.dev.parent = dev;
+ udc->board = *(struct at91_udc_data *) dev->platform_data;
+ udc->pdev = pdev;
+ udc_reinit(udc);
+ udc->enabled = 0;
+
+ /* get interface and function clocks */
+ udc->iclk = clk_get(dev, "udc_clk");
+ udc->fclk = clk_get(dev, "udpck");
+ if (IS_ERR(udc->iclk) || IS_ERR(udc->fclk)) {
+ DBG("clocks missing\n");
+ return -ENODEV;
+ }
+
+ retval = device_register(&udc->gadget.dev);
+ if (retval < 0)
+ goto fail0;
+
+ /* disable everything until there's a gadget driver and vbus */
+ pullup(udc, 0);
+
+ /* request UDC and maybe VBUS irqs */
+ if (request_irq(AT91_ID_UDP, at91_udc_irq, SA_INTERRUPT, driver_name, udc)) {
+ DBG("request irq %d failed\n", AT91_ID_UDP);
+ retval = -EBUSY;
+ goto fail1;
+ }
+ if (udc->board.vbus_pin > 0) {
+ if (request_irq(udc->board.vbus_pin, at91_vbus_irq, SA_INTERRUPT, driver_name, udc)) {
+ DBG("request vbus irq %d failed\n", udc->board.vbus_pin);
+ free_irq(AT91_ID_UDP, udc);
+ retval = -EBUSY;
+ goto fail1;
+ }
+ } else {
+ DBG("no VBUS detection, assuming always-on\n");
+ udc->vbus = 1;
+ }
+ dev_set_drvdata(dev, udc);
+ create_debug_file(udc);
+
+ INFO("%s version %s\n", driver_name, DRIVER_VERSION);
+ return 0;
+
+fail1:
+ device_unregister(&udc->gadget.dev);
+fail0:
+ release_mem_region(AT91_VA_BASE_UDP, SZ_16K);
+ DBG("%s probe failed, %d\n", driver_name, retval);
+ return retval;
+}
+
+static int __devexit at91udc_remove(struct platform_device *dev)
+{
+ struct at91_udc *udc = platform_get_drvdata(dev);
+
+ DBG("remove\n");
+
+ pullup(udc, 0);
+
+ if (udc->driver != 0)
+ usb_gadget_unregister_driver(udc->driver);
+
+ remove_debug_file(udc);
+ if (udc->board.vbus_pin > 0)
+ free_irq(udc->board.vbus_pin, udc);
+ free_irq(AT91_ID_UDP, udc);
+ device_unregister(&udc->gadget.dev);
+ release_mem_region(AT91_BASE_UDP, SZ_16K);
+
+ clk_put(udc->iclk);
+ clk_put(udc->fclk);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int at91udc_suspend(struct platform_device *dev, u32 state, u32 level)
+{
+ struct at91_udc *udc = platform_get_drvdata(dev);
+
+ /*
+ * The "safe" suspend transitions are opportunistic ... e.g. when
+ * the USB link is suspended (48MHz clock autogated off), or when
+ * it's disconnected (programmatically gated off, elsewhere).
+ * Then we can suspend, and the chip can enter slow clock mode.
+ *
+ * The problem case is some component (user mode?) suspending this
+ * device while it's active, with the 48 MHz clock in use. There
+ * are two basic approaches: (a) veto suspend levels involving slow
+ * clock mode, (b) disconnect, so 48 MHz will no longer be in use
+ * and we can enter slow clock mode. This uses (b) for now, since
+ * it's simplest until AT91 PM exists and supports the other option.
+ */
+ if (udc->vbus && !udc->suspended)
+ pullup(udc, 0);
+ return 0;
+}
+
+static int at91udc_resume(struct platform_device *dev, u32 level)
+{
+ struct at91_udc *udc = platform_get_drvdata(dev);
+
+ /* maybe reconnect to host; if so, clocks on */
+ pullup(udc, 1);
+ return 0;
+}
+#else
+#define at91udc_suspend NULL
+#define at91udc_resume NULL
+#endif
+
+static struct platform_driver at91_udc = {
+ .probe = at91udc_probe,
+ .remove = __devexit_p(at91udc_remove),
+ .shutdown = at91udc_shutdown,
+ .suspend = at91udc_suspend,
+ .resume = at91udc_resume,
+ .driver = {
+ .name = (char *) driver_name,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __devinit udc_init_module(void)
+{
+ return platform_driver_register(&at91_udc);
+}
+module_init(udc_init_module);
+
+static void __devexit udc_exit_module(void)
+{
+ platform_driver_unregister(&at91_udc);
+}
+module_exit(udc_exit_module);
+
+MODULE_DESCRIPTION("AT91RM9200 udc driver");
+MODULE_AUTHOR("Thomas Rathbone, David Brownell");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/at91_udc.h b/drivers/usb/gadget/at91_udc.h
new file mode 100644
index 00000000000..5a4799cedd1
--- /dev/null
+++ b/drivers/usb/gadget/at91_udc.h
@@ -0,0 +1,181 @@
+/*
+ * Copyright (C) 2004 by Thomas Rathbone, HP Labs
+ * Copyright (C) 2005 by Ivan Kokshaysky
+ * Copyright (C) 2006 by SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef AT91_UDC_H
+#define AT91_UDC_H
+
+/*
+ * USB Device Port (UDP) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ */
+
+#define AT91_UDP_FRM_NUM 0x00 /* Frame Number Register */
+#define AT91_UDP_NUM (0x7ff << 0) /* Frame Number */
+#define AT91_UDP_FRM_ERR (1 << 16) /* Frame Error */
+#define AT91_UDP_FRM_OK (1 << 17) /* Frame OK */
+
+#define AT91_UDP_GLB_STAT 0x04 /* Global State Register */
+#define AT91_UDP_FADDEN (1 << 0) /* Function Address Enable */
+#define AT91_UDP_CONFG (1 << 1) /* Configured */
+#define AT91_UDP_ESR (1 << 2) /* Enable Send Resume */
+#define AT91_UDP_RSMINPR (1 << 3) /* Resume has been sent */
+#define AT91_UDP_RMWUPE (1 << 4) /* Remote Wake Up Enable */
+
+#define AT91_UDP_FADDR 0x08 /* Function Address Register */
+#define AT91_UDP_FADD (0x7f << 0) /* Function Address Value */
+#define AT91_UDP_FEN (1 << 8) /* Function Enable */
+
+#define AT91_UDP_IER 0x10 /* Interrupt Enable Register */
+#define AT91_UDP_IDR 0x14 /* Interrupt Disable Register */
+#define AT91_UDP_IMR 0x18 /* Interrupt Mask Register */
+
+#define AT91_UDP_ISR 0x1c /* Interrupt Status Register */
+#define AT91_UDP_EP(n) (1 << (n)) /* Endpoint Interrupt Status */
+#define AT91_UDP_RXSUSP (1 << 8) /* USB Suspend Interrupt Status */
+#define AT91_UDP_RXRSM (1 << 9) /* USB Resume Interrupt Status */
+#define AT91_UDP_EXTRSM (1 << 10) /* External Resume Interrupt Status */
+#define AT91_UDP_SOFINT (1 << 11) /* Start of Frame Interrupt Status */
+#define AT91_UDP_ENDBUSRES (1 << 12) /* End of Bus Reset Interrpt Status */
+#define AT91_UDP_WAKEUP (1 << 13) /* USB Wakeup Interrupt Status */
+
+#define AT91_UDP_ICR 0x20 /* Interrupt Clear Register */
+#define AT91_UDP_RST_EP 0x28 /* Reset Endpoint Register */
+
+#define AT91_UDP_CSR(n) (0x30+((n)*4)) /* Endpoint Control/Status Registers 0-7 */
+#define AT91_UDP_TXCOMP (1 << 0) /* Generates IN packet with data previously written in DPR */
+#define AT91_UDP_RX_DATA_BK0 (1 << 1) /* Receive Data Bank 0 */
+#define AT91_UDP_RXSETUP (1 << 2) /* Send STALL to the host */
+#define AT91_UDP_STALLSENT (1 << 3) /* Stall Sent / Isochronous error (Isochronous endpoints) */
+#define AT91_UDP_TXPKTRDY (1 << 4) /* Transmit Packet Ready */
+#define AT91_UDP_FORCESTALL (1 << 5) /* Force Stall */
+#define AT91_UDP_RX_DATA_BK1 (1 << 6) /* Receive Data Bank 1 */
+#define AT91_UDP_DIR (1 << 7) /* Transfer Direction */
+#define AT91_UDP_EPTYPE (7 << 8) /* Endpoint Type */
+#define AT91_UDP_EPTYPE_CTRL (0 << 8)
+#define AT91_UDP_EPTYPE_ISO_OUT (1 << 8)
+#define AT91_UDP_EPTYPE_BULK_OUT (2 << 8)
+#define AT91_UDP_EPTYPE_INT_OUT (3 << 8)
+#define AT91_UDP_EPTYPE_ISO_IN (5 << 8)
+#define AT91_UDP_EPTYPE_BULK_IN (6 << 8)
+#define AT91_UDP_EPTYPE_INT_IN (7 << 8)
+#define AT91_UDP_DTGLE (1 << 11) /* Data Toggle */
+#define AT91_UDP_EPEDS (1 << 15) /* Endpoint Enable/Disable */
+#define AT91_UDP_RXBYTECNT (0x7ff << 16) /* Number of bytes in FIFO */
+
+#define AT91_UDP_FDR(n) (0x50+((n)*4)) /* Endpoint FIFO Data Registers 0-7 */
+
+#define AT91_UDP_TXVC 0x74 /* Transceiver Control Register */
+#define AT91_UDP_TXVC_TXVDIS (1 << 8) /* Transceiver Disable */
+
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * controller driver data structures
+ */
+
+#define NUM_ENDPOINTS 6
+
+/*
+ * hardware won't disable bus reset, or resume while the controller
+ * is suspended ... watching suspend helps keep the logic symmetric.
+ */
+#define MINIMUS_INTERRUPTUS \
+ (AT91_UDP_ENDBUSRES | AT91_UDP_RXRSM | AT91_UDP_RXSUSP)
+
+struct at91_ep {
+ struct usb_ep ep;
+ struct list_head queue;
+ struct at91_udc *udc;
+ void __iomem *creg;
+
+ unsigned maxpacket:16;
+ u8 int_mask;
+ unsigned is_pingpong:1;
+
+ unsigned stopped:1;
+ unsigned is_in:1;
+ unsigned is_iso:1;
+ unsigned fifo_bank:1;
+
+ const struct usb_endpoint_descriptor
+ *desc;
+};
+
+/*
+ * driver is non-SMP, and just blocks IRQs whenever it needs
+ * access protection for chip registers or driver state
+ */
+struct at91_udc {
+ struct usb_gadget gadget;
+ struct at91_ep ep[NUM_ENDPOINTS];
+ struct usb_gadget_driver *driver;
+ unsigned vbus:1;
+ unsigned enabled:1;
+ unsigned clocked:1;
+ unsigned suspended:1;
+ unsigned req_pending:1;
+ unsigned wait_for_addr_ack:1;
+ unsigned wait_for_config_ack:1;
+ unsigned selfpowered:1;
+ u8 addr;
+ struct at91_udc_data board;
+ struct clk *iclk, *fclk;
+ struct platform_device *pdev;
+ struct proc_dir_entry *pde;
+};
+
+static inline struct at91_udc *to_udc(struct usb_gadget *g)
+{
+ return container_of(g, struct at91_udc, gadget);
+}
+
+struct at91_request {
+ struct usb_request req;
+ struct list_head queue;
+};
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef DEBUG
+#define DBG(stuff...) printk(KERN_DEBUG "udc: " stuff)
+#else
+#define DBG(stuff...) do{}while(0)
+#endif
+
+#ifdef VERBOSE
+# define VDBG DBG
+#else
+# define VDBG(stuff...) do{}while(0)
+#endif
+
+#ifdef PACKET_TRACE
+# define PACKET VDBG
+#else
+# define PACKET(stuff...) do{}while(0)
+#endif
+
+#define ERR(stuff...) printk(KERN_ERR "udc: " stuff)
+#define WARN(stuff...) printk(KERN_WARNING "udc: " stuff)
+#define INFO(stuff...) printk(KERN_INFO "udc: " stuff)
+
+#endif
+
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index 9734cb76dd6..42ce41d71b7 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -478,10 +478,9 @@ dummy_alloc_request (struct usb_ep *_ep, gfp_t mem_flags)
return NULL;
ep = usb_ep_to_dummy_ep (_ep);
- req = kmalloc (sizeof *req, mem_flags);
+ req = kzalloc(sizeof(*req), mem_flags);
if (!req)
return NULL;
- memset (req, 0, sizeof *req);
INIT_LIST_HEAD (&req->queue);
return &req->req;
}
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index afc84cfb61f..c3d8e5c5bf2 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -182,33 +182,37 @@ struct eth_dev {
* parameters are in UTF-8 (superset of ASCII's 7 bit characters).
*/
-static ushort __initdata idVendor;
+static ushort idVendor;
module_param(idVendor, ushort, S_IRUGO);
MODULE_PARM_DESC(idVendor, "USB Vendor ID");
-static ushort __initdata idProduct;
+static ushort idProduct;
module_param(idProduct, ushort, S_IRUGO);
MODULE_PARM_DESC(idProduct, "USB Product ID");
-static ushort __initdata bcdDevice;
+static ushort bcdDevice;
module_param(bcdDevice, ushort, S_IRUGO);
MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)");
-static char *__initdata iManufacturer;
+static char *iManufacturer;
module_param(iManufacturer, charp, S_IRUGO);
MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string");
-static char *__initdata iProduct;
+static char *iProduct;
module_param(iProduct, charp, S_IRUGO);
MODULE_PARM_DESC(iProduct, "USB Product string");
+static char *iSerialNumber;
+module_param(iSerialNumber, charp, S_IRUGO);
+MODULE_PARM_DESC(iSerialNumber, "SerialNumber");
+
/* initial value, changed by "ifconfig usb0 hw ether xx:xx:xx:xx:xx:xx" */
-static char *__initdata dev_addr;
+static char *dev_addr;
module_param(dev_addr, charp, S_IRUGO);
MODULE_PARM_DESC(dev_addr, "Device Ethernet Address");
/* this address is invisible to ifconfig */
-static char *__initdata host_addr;
+static char *host_addr;
module_param(host_addr, charp, S_IRUGO);
MODULE_PARM_DESC(host_addr, "Host Ethernet Address");
@@ -253,6 +257,14 @@ MODULE_PARM_DESC(host_addr, "Host Ethernet Address");
#define DEV_CONFIG_CDC
#endif
+#ifdef CONFIG_USB_GADGET_MUSBHSFC
+#define DEV_CONFIG_CDC
+#endif
+
+#ifdef CONFIG_USB_GADGET_MUSBHDRC
+#define DEV_CONFIG_CDC
+#endif
+
/* For CDC-incapable hardware, choose the simple cdc subset.
* Anything that talks bulk (without notable bugs) can do this.
@@ -395,6 +407,7 @@ static inline int BITRATE(struct usb_gadget *g)
#define STRING_CDC 7
#define STRING_SUBSET 8
#define STRING_RNDIS 9
+#define STRING_SERIALNUMBER 10
/* holds our biggest descriptor (or RNDIS response) */
#define USB_BUFSIZ 256
@@ -862,6 +875,7 @@ static inline void __init hs_subset_descriptors(void)
static char manufacturer [50];
static char product_desc [40] = DRIVER_DESC;
+static char serial_number [20];
#ifdef DEV_CONFIG_CDC
/* address that the host will use ... usually assigned at random */
@@ -872,6 +886,7 @@ static char ethaddr [2 * ETH_ALEN + 1];
static struct usb_string strings [] = {
{ STRING_MANUFACTURER, manufacturer, },
{ STRING_PRODUCT, product_desc, },
+ { STRING_SERIALNUMBER, serial_number, },
{ STRING_DATA, "Ethernet Data", },
#ifdef DEV_CONFIG_CDC
{ STRING_CDC, "CDC Ethernet", },
@@ -1549,7 +1564,8 @@ static int eth_change_mtu (struct net_device *net, int new_mtu)
{
struct eth_dev *dev = netdev_priv(net);
- // FIXME if rndis, don't change while link's live
+ if (dev->rndis)
+ return -EBUSY;
if (new_mtu <= ETH_HLEN || new_mtu > ETH_FRAME_LEN)
return -ERANGE;
@@ -2116,7 +2132,7 @@ eth_req_free (struct usb_ep *ep, struct usb_request *req)
}
-static void
+static void __exit
eth_unbind (struct usb_gadget *gadget)
{
struct eth_dev *dev = get_gadget_data (gadget);
@@ -2153,7 +2169,7 @@ static u8 __init nibble (unsigned char c)
return 0;
}
-static void __init get_ether_addr (const char *str, u8 *dev_addr)
+static int __init get_ether_addr(const char *str, u8 *dev_addr)
{
if (str) {
unsigned i;
@@ -2168,9 +2184,10 @@ static void __init get_ether_addr (const char *str, u8 *dev_addr)
dev_addr [i] = num;
}
if (is_valid_ether_addr (dev_addr))
- return;
+ return 0;
}
random_ether_addr(dev_addr);
+ return 1;
}
static int __init
@@ -2268,6 +2285,10 @@ eth_bind (struct usb_gadget *gadget)
strlcpy (manufacturer, iManufacturer, sizeof manufacturer);
if (iProduct)
strlcpy (product_desc, iProduct, sizeof product_desc);
+ if (iSerialNumber) {
+ device_desc.iSerialNumber = STRING_SERIALNUMBER,
+ strlcpy(serial_number, iSerialNumber, sizeof serial_number);
+ }
/* all we really need is bulk IN/OUT */
usb_ep_autoconfig_reset (gadget);
@@ -2377,9 +2398,13 @@ autoconf_fail:
* The host side address is used with CDC and RNDIS, and commonly
* ends up in a persistent config database.
*/
- get_ether_addr(dev_addr, net->dev_addr);
+ if (get_ether_addr(dev_addr, net->dev_addr))
+ dev_warn(&gadget->dev,
+ "using random %s ethernet address\n", "self");
if (cdc || rndis) {
- get_ether_addr(host_addr, dev->host_mac);
+ if (get_ether_addr(host_addr, dev->host_mac))
+ dev_warn(&gadget->dev,
+ "using random %s ethernet address\n", "host");
#ifdef DEV_CONFIG_CDC
snprintf (ethaddr, sizeof ethaddr, "%02X%02X%02X%02X%02X%02X",
dev->host_mac [0], dev->host_mac [1],
@@ -2523,7 +2548,7 @@ static struct usb_gadget_driver eth_driver = {
.function = (char *) driver_desc,
.bind = eth_bind,
- .unbind = eth_unbind,
+ .unbind = __exit_p(eth_unbind),
.setup = eth_setup,
.disconnect = eth_disconnect,
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index de59c58896d..cf3be299e35 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -3678,7 +3678,7 @@ static void lun_release(struct device *dev)
kref_put(&fsg->ref, fsg_release);
}
-static void fsg_unbind(struct usb_gadget *gadget)
+static void __exit fsg_unbind(struct usb_gadget *gadget)
{
struct fsg_dev *fsg = get_gadget_data(gadget);
int i;
@@ -4064,7 +4064,7 @@ static struct usb_gadget_driver fsg_driver = {
#endif
.function = (char *) longname,
.bind = fsg_bind,
- .unbind = fsg_unbind,
+ .unbind = __exit_p(fsg_unbind),
.disconnect = fsg_disconnect,
.setup = fsg_setup,
.suspend = fsg_suspend,
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index 8cbae21d84b..c4081407171 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -3,9 +3,9 @@
* gadget drivers or other code that needs to deal with them, and which
* autoconfigures instead of using early binding to the hardware.
*
- * This could eventually work like the ARM mach_is_*() stuff, driven by
+ * This SHOULD eventually work like the ARM mach_is_*() stuff, driven by
* some config file that gets updated as new hardware is supported.
- * (And avoiding the runtime comparisons in typical one-choice cases.)
+ * (And avoiding all runtime comparisons in typical one-choice configs!)
*
* NOTE: some of these controller drivers may not be available yet.
*/
@@ -93,6 +93,26 @@
#define gadget_is_imx(g) 0
#endif
+/* Mentor high speed function controller */
+#ifdef CONFIG_USB_GADGET_MUSBHSFC
+#define gadget_is_musbhsfc(g) !strcmp("musbhsfc_udc", (g)->name)
+#else
+#define gadget_is_musbhsfc(g) 0
+#endif
+
+/* Mentor high speed "dual role" controller, peripheral mode */
+#ifdef CONFIG_USB_GADGET_MUSBHDRC
+#define gadget_is_musbhdrc(g) !strcmp("musbhdrc_udc", (g)->name)
+#else
+#define gadget_is_musbhdrc(g) 0
+#endif
+
+#ifdef CONFIG_USB_GADGET_MPC8272
+#define gadget_is_mpc8272(g) !strcmp("mpc8272_udc", (g)->name)
+#else
+#define gadget_is_mpc8272(g) 0
+#endif
+
// CONFIG_USB_GADGET_SX2
// CONFIG_USB_GADGET_AU1X00
// ...
@@ -143,5 +163,11 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
return 0x13;
else if (gadget_is_imx(gadget))
return 0x14;
+ else if (gadget_is_musbhsfc(gadget))
+ return 0x15;
+ else if (gadget_is_musbhdrc(gadget))
+ return 0x16;
+ else if (gadget_is_mpc8272(gadget))
+ return 0x17;
return -ENOENT;
}
diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c
index b0f3cd63e3b..66b81bbf6be 100644
--- a/drivers/usb/gadget/goku_udc.c
+++ b/drivers/usb/gadget/goku_udc.c
@@ -275,11 +275,10 @@ goku_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
if (!_ep)
return NULL;
- req = kmalloc(sizeof *req, gfp_flags);
+ req = kzalloc(sizeof *req, gfp_flags);
if (!req)
return NULL;
- memset(req, 0, sizeof *req);
req->req.dma = DMA_ADDR_INVALID;
INIT_LIST_HEAD(&req->queue);
return &req->req;
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index 0aab7d24c76..b44cfda76b6 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -170,10 +170,9 @@ static struct dev_data *dev_new (void)
{
struct dev_data *dev;
- dev = kmalloc (sizeof *dev, GFP_KERNEL);
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev)
return NULL;
- memset (dev, 0, sizeof *dev);
dev->state = STATE_DEV_DISABLED;
atomic_set (&dev->count, 1);
spin_lock_init (&dev->lock);
@@ -1592,10 +1591,9 @@ static int activate_ep_files (struct dev_data *dev)
gadget_for_each_ep (ep, dev->gadget) {
struct ep_data *data;
- data = kmalloc (sizeof *data, GFP_KERNEL);
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
if (!data)
goto enomem;
- memset (data, 0, sizeof data);
data->state = STATE_EP_DISABLED;
init_MUTEX (&data->lock);
init_waitqueue_head (&data->wait);
diff --git a/drivers/usb/gadget/lh7a40x_udc.c b/drivers/usb/gadget/lh7a40x_udc.c
index 1a362c5e7f3..0d3424eda03 100644
--- a/drivers/usb/gadget/lh7a40x_udc.c
+++ b/drivers/usb/gadget/lh7a40x_udc.c
@@ -1114,11 +1114,10 @@ static struct usb_request *lh7a40x_alloc_request(struct usb_ep *ep,
DEBUG("%s, %p\n", __FUNCTION__, ep);
- req = kmalloc(sizeof *req, gfp_flags);
+ req = kzalloc(sizeof(*req), gfp_flags);
if (!req)
return 0;
- memset(req, 0, sizeof *req);
INIT_LIST_HEAD(&req->queue);
return &req->req;
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index 67b13ab2f3f..fb73dc10053 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -386,11 +386,10 @@ net2280_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags)
return NULL;
ep = container_of (_ep, struct net2280_ep, ep);
- req = kmalloc (sizeof *req, gfp_flags);
+ req = kzalloc(sizeof(*req), gfp_flags);
if (!req)
return NULL;
- memset (req, 0, sizeof *req);
req->req.dma = DMA_ADDR_INVALID;
INIT_LIST_HEAD (&req->queue);
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index a8972d7c97b..fbea5144890 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -273,9 +273,8 @@ omap_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
{
struct omap_req *req;
- req = kmalloc(sizeof *req, gfp_flags);
+ req = kzalloc(sizeof(*req), gfp_flags);
if (req) {
- memset (req, 0, sizeof *req);
req->req.dma = DMA_ADDR_INVALID;
INIT_LIST_HEAD (&req->queue);
}
@@ -2586,11 +2585,10 @@ omap_udc_setup(struct platform_device *odev, struct otg_transceiver *xceiv)
/* UDC_PULLUP_EN gates the chip clock */
// OTG_SYSCON_1_REG |= DEV_IDLE_EN;
- udc = kmalloc (sizeof *udc, SLAB_KERNEL);
+ udc = kzalloc(sizeof(*udc), SLAB_KERNEL);
if (!udc)
return -ENOMEM;
- memset(udc, 0, sizeof *udc);
spin_lock_init (&udc->lock);
udc->gadget.ops = &omap_gadget_ops;
diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c
index bb028c5b895..680f7fc5b17 100644
--- a/drivers/usb/gadget/pxa2xx_udc.c
+++ b/drivers/usb/gadget/pxa2xx_udc.c
@@ -335,11 +335,10 @@ pxa2xx_ep_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags)
{
struct pxa2xx_request *req;
- req = kmalloc (sizeof *req, gfp_flags);
+ req = kzalloc(sizeof(*req), gfp_flags);
if (!req)
return NULL;
- memset (req, 0, sizeof *req);
INIT_LIST_HEAD (&req->queue);
return &req->req;
}
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index ba9acd53102..b992546c394 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -369,7 +369,7 @@ static struct usb_gadget_driver gs_gadget_driver = {
#endif /* CONFIG_USB_GADGET_DUALSPEED */
.function = GS_LONG_NAME,
.bind = gs_bind,
- .unbind = gs_unbind,
+ .unbind = __exit_p(gs_unbind),
.setup = gs_setup,
.disconnect = gs_disconnect,
.driver = {
@@ -1413,7 +1413,7 @@ requeue:
* Called on module load. Allocates and initializes the device
* structure and a control request.
*/
-static int gs_bind(struct usb_gadget *gadget)
+static int __init gs_bind(struct usb_gadget *gadget)
{
int ret;
struct usb_ep *ep;
@@ -1538,7 +1538,7 @@ autoconf_fail:
* Called on module unload. Frees the control request and device
* structure.
*/
-static void gs_unbind(struct usb_gadget *gadget)
+static void __exit gs_unbind(struct usb_gadget *gadget)
{
struct gs_dev *dev = get_gadget_data(gadget);
@@ -2178,10 +2178,9 @@ static int gs_alloc_ports(struct gs_dev *dev, gfp_t kmalloc_flags)
return -EIO;
for (i=0; i<GS_NUM_PORTS; i++) {
- if ((port=(struct gs_port *)kmalloc(sizeof(struct gs_port), kmalloc_flags)) == NULL)
+ if ((port=kzalloc(sizeof(struct gs_port), kmalloc_flags)) == NULL)
return -ENOMEM;
- memset(port, 0, sizeof(struct gs_port));
port->port_dev = dev;
port->port_num = i;
port->port_line_coding.dwDTERate = cpu_to_le32(GS_DEFAULT_DTE_RATE);
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index ae7a1c0f574..51424f66a76 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -1119,7 +1119,7 @@ zero_autoresume (unsigned long _dev)
/*-------------------------------------------------------------------------*/
-static void
+static void __exit
zero_unbind (struct usb_gadget *gadget)
{
struct zero_dev *dev = get_gadget_data (gadget);
@@ -1136,7 +1136,7 @@ zero_unbind (struct usb_gadget *gadget)
set_gadget_data (gadget, NULL);
}
-static int
+static int __init
zero_bind (struct usb_gadget *gadget)
{
struct zero_dev *dev;
@@ -1188,10 +1188,9 @@ autoconf_fail:
/* ok, we made sense of the hardware ... */
- dev = kmalloc (sizeof *dev, SLAB_KERNEL);
+ dev = kzalloc(sizeof(*dev), SLAB_KERNEL);
if (!dev)
return -ENOMEM;
- memset (dev, 0, sizeof *dev);
spin_lock_init (&dev->lock);
dev->gadget = gadget;
set_gadget_data (gadget, dev);
@@ -1224,12 +1223,6 @@ autoconf_fail:
loopback_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
}
- if (gadget->is_otg) {
- otg_descriptor.bmAttributes |= USB_OTG_HNP,
- source_sink_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
- loopback_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
- }
-
usb_gadget_set_selfpowered (gadget);
init_timer (&dev->resume);
@@ -1294,7 +1287,7 @@ static struct usb_gadget_driver zero_driver = {
#endif
.function = (char *) longname,
.bind = zero_bind,
- .unbind = zero_unbind,
+ .unbind = __exit_p(zero_unbind),
.setup = zero_setup,
.disconnect = zero_disconnect,
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-05 12:41:48 +0000