summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/ohci-hcd.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/ohci-hcd.c')
-rw-r--r--drivers/usb/host/ohci-hcd.c54
1 files changed, 32 insertions, 22 deletions
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index a4b12404ae0..544f7589912 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -443,11 +443,16 @@ ohci_reboot (struct notifier_block *block, unsigned long code, void *null)
static int ohci_init (struct ohci_hcd *ohci)
{
int ret;
+ struct usb_hcd *hcd = ohci_to_hcd(ohci);
disable (ohci);
- ohci->regs = ohci_to_hcd(ohci)->regs;
+ ohci->regs = hcd->regs;
ohci->next_statechange = jiffies;
+ /* REVISIT this BIOS handshake is now moved into PCI "quirks", and
+ * was never needed for most non-PCI systems ... remove the code?
+ */
+
#ifndef IR_DISABLE
/* SMM owns the HC? not for long! */
if (!no_handshake && ohci_readl (ohci,
@@ -478,8 +483,10 @@ static int ohci_init (struct ohci_hcd *ohci)
/* Disable HC interrupts */
ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
- // flush the writes
- (void) ohci_readl (ohci, &ohci->regs->control);
+
+ /* flush the writes, and save key bits like RWC */
+ if (ohci_readl (ohci, &ohci->regs->control) & OHCI_CTRL_RWC)
+ ohci->hc_control |= OHCI_CTRL_RWC;
/* Read the number of ports unless overridden */
if (ohci->num_ports == 0)
@@ -488,16 +495,19 @@ static int ohci_init (struct ohci_hcd *ohci)
if (ohci->hcca)
return 0;
- ohci->hcca = dma_alloc_coherent (ohci_to_hcd(ohci)->self.controller,
+ ohci->hcca = dma_alloc_coherent (hcd->self.controller,
sizeof *ohci->hcca, &ohci->hcca_dma, 0);
if (!ohci->hcca)
return -ENOMEM;
if ((ret = ohci_mem_init (ohci)) < 0)
- ohci_stop (ohci_to_hcd(ohci));
+ ohci_stop (hcd);
+ else {
+ register_reboot_notifier (&ohci->reboot_notifier);
+ create_debug_files (ohci);
+ }
return ret;
-
}
/*-------------------------------------------------------------------------*/
@@ -510,6 +520,7 @@ static int ohci_run (struct ohci_hcd *ohci)
{
u32 mask, temp;
int first = ohci->fminterval == 0;
+ struct usb_hcd *hcd = ohci_to_hcd(ohci);
disable (ohci);
@@ -525,18 +536,17 @@ static int ohci_run (struct ohci_hcd *ohci)
/* also: power/overcurrent flags in roothub.a */
}
- /* Reset USB nearly "by the book". RemoteWakeupConnected
- * saved if boot firmware (BIOS/SMM/...) told us it's connected
- * (for OHCI integrated on mainboard, it normally is)
+ /* Reset USB nearly "by the book". RemoteWakeupConnected was
+ * saved if boot firmware (BIOS/SMM/...) told us it's connected,
+ * or if bus glue did the same (e.g. for PCI add-in cards with
+ * PCI PM support).
*/
- ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
ohci_dbg (ohci, "resetting from state '%s', control = 0x%x\n",
hcfs2string (ohci->hc_control & OHCI_CTRL_HCFS),
- ohci->hc_control);
-
- if (ohci->hc_control & OHCI_CTRL_RWC
- && !(ohci->flags & OHCI_QUIRK_AMD756))
- ohci_to_hcd(ohci)->can_wakeup = 1;
+ ohci_readl (ohci, &ohci->regs->control));
+ if ((ohci->hc_control & OHCI_CTRL_RWC) != 0
+ && !device_may_wakeup(hcd->self.controller))
+ device_init_wakeup(hcd->self.controller, 1);
switch (ohci->hc_control & OHCI_CTRL_HCFS) {
case OHCI_USB_OPER:
@@ -632,7 +642,7 @@ retry:
ohci->hc_control &= OHCI_CTRL_RWC;
ohci->hc_control |= OHCI_CONTROL_INIT | OHCI_USB_OPER;
ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
- ohci_to_hcd(ohci)->state = HC_STATE_RUNNING;
+ hcd->state = HC_STATE_RUNNING;
/* wake on ConnectStatusChange, matching external hubs */
ohci_writel (ohci, RH_HS_DRWE, &ohci->regs->roothub.status);
@@ -667,15 +677,10 @@ retry:
// POTPGT delay is bits 24-31, in 2 ms units.
mdelay ((temp >> 23) & 0x1fe);
- ohci_to_hcd(ohci)->state = HC_STATE_RUNNING;
+ hcd->state = HC_STATE_RUNNING;
ohci_dump (ohci, 1);
- if (ohci_to_hcd(ohci)->self.root_hub == NULL) {
- register_reboot_notifier (&ohci->reboot_notifier);
- create_debug_files (ohci);
- }
-
return 0;
}
@@ -905,6 +910,10 @@ MODULE_LICENSE ("GPL");
#include "ohci-ppc-soc.c"
#endif
+#ifdef CONFIG_ARCH_AT91RM9200
+#include "ohci-at91.c"
+#endif
+
#if !(defined(CONFIG_PCI) \
|| defined(CONFIG_SA1111) \
|| defined(CONFIG_ARCH_S3C2410) \
@@ -913,6 +922,7 @@ MODULE_LICENSE ("GPL");
|| defined (CONFIG_PXA27x) \
|| defined (CONFIG_SOC_AU1X00) \
|| defined (CONFIG_USB_OHCI_HCD_PPC_SOC) \
+ || defined (CONFIG_ARCH_AT91RM9200) \
)
#error "missing bus glue for ohci-hcd"
#endif