summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/xhci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/xhci.c')
-rw-r--r--drivers/usb/host/xhci.c1917
1 files changed, 1917 insertions, 0 deletions
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
new file mode 100644
index 00000000000..492a61c2c79
--- /dev/null
+++ b/drivers/usb/host/xhci.c
@@ -0,0 +1,1917 @@
+/*
+ * xHCI host controller driver
+ *
+ * Copyright (C) 2008 Intel Corp.
+ *
+ * Author: Sarah Sharp
+ * Some code borrowed from the Linux EHCI driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+
+#include "xhci.h"
+
+#define DRIVER_AUTHOR "Sarah Sharp"
+#define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver"
+
+/* Some 0.95 hardware can't handle the chain bit on a Link TRB being cleared */
+static int link_quirk;
+module_param(link_quirk, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(link_quirk, "Don't clear the chain bit on a link TRB");
+
+/* TODO: copied from ehci-hcd.c - can this be refactored? */
+/*
+ * handshake - spin reading hc until handshake completes or fails
+ * @ptr: address of hc register to be read
+ * @mask: bits to look at in result of read
+ * @done: value of those bits when handshake succeeds
+ * @usec: timeout in microseconds
+ *
+ * Returns negative errno, or zero on success
+ *
+ * Success happens when the "mask" bits have the specified value (hardware
+ * handshake done). There are two failure modes: "usec" have passed (major
+ * hardware flakeout), or the register reads as all-ones (hardware removed).
+ */
+static int handshake(struct xhci_hcd *xhci, void __iomem *ptr,
+ u32 mask, u32 done, int usec)
+{
+ u32 result;
+
+ do {
+ result = xhci_readl(xhci, ptr);
+ if (result == ~(u32)0) /* card removed */
+ return -ENODEV;
+ result &= mask;
+ if (result == done)
+ return 0;
+ udelay(1);
+ usec--;
+ } while (usec > 0);
+ return -ETIMEDOUT;
+}
+
+/*
+ * Disable interrupts and begin the xHCI halting process.
+ */
+void xhci_quiesce(struct xhci_hcd *xhci)
+{
+ u32 halted;
+ u32 cmd;
+ u32 mask;
+
+ mask = ~(XHCI_IRQS);
+ halted = xhci_readl(xhci, &xhci->op_regs->status) & STS_HALT;
+ if (!halted)
+ mask &= ~CMD_RUN;
+
+ cmd = xhci_readl(xhci, &xhci->op_regs->command);
+ cmd &= mask;
+ xhci_writel(xhci, cmd, &xhci->op_regs->command);
+}
+
+/*
+ * Force HC into halt state.
+ *
+ * Disable any IRQs and clear the run/stop bit.
+ * HC will complete any current and actively pipelined transactions, and
+ * should halt within 16 microframes of the run/stop bit being cleared.
+ * Read HC Halted bit in the status register to see when the HC is finished.
+ * XXX: shouldn't we set HC_STATE_HALT here somewhere?
+ */
+int xhci_halt(struct xhci_hcd *xhci)
+{
+ xhci_dbg(xhci, "// Halt the HC\n");
+ xhci_quiesce(xhci);
+
+ return handshake(xhci, &xhci->op_regs->status,
+ STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC);
+}
+
+/*
+ * Reset a halted HC, and set the internal HC state to HC_STATE_HALT.
+ *
+ * This resets pipelines, timers, counters, state machines, etc.
+ * Transactions will be terminated immediately, and operational registers
+ * will be set to their defaults.
+ */
+int xhci_reset(struct xhci_hcd *xhci)
+{
+ u32 command;
+ u32 state;
+
+ state = xhci_readl(xhci, &xhci->op_regs->status);
+ if ((state & STS_HALT) == 0) {
+ xhci_warn(xhci, "Host controller not halted, aborting reset.\n");
+ return 0;
+ }
+
+ xhci_dbg(xhci, "// Reset the HC\n");
+ command = xhci_readl(xhci, &xhci->op_regs->command);
+ command |= CMD_RESET;
+ xhci_writel(xhci, command, &xhci->op_regs->command);
+ /* XXX: Why does EHCI set this here? Shouldn't other code do this? */
+ xhci_to_hcd(xhci)->state = HC_STATE_HALT;
+
+ return handshake(xhci, &xhci->op_regs->command, CMD_RESET, 0, 250 * 1000);
+}
+
+
+#if 0
+/* Set up MSI-X table for entry 0 (may claim other entries later) */
+static int xhci_setup_msix(struct xhci_hcd *xhci)
+{
+ int ret;
+ struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+
+ xhci->msix_count = 0;
+ /* XXX: did I do this right? ixgbe does kcalloc for more than one */
+ xhci->msix_entries = kmalloc(sizeof(struct msix_entry), GFP_KERNEL);
+ if (!xhci->msix_entries) {
+ xhci_err(xhci, "Failed to allocate MSI-X entries\n");
+ return -ENOMEM;
+ }
+ xhci->msix_entries[0].entry = 0;
+
+ ret = pci_enable_msix(pdev, xhci->msix_entries, xhci->msix_count);
+ if (ret) {
+ xhci_err(xhci, "Failed to enable MSI-X\n");
+ goto free_entries;
+ }
+
+ /*
+ * Pass the xhci pointer value as the request_irq "cookie".
+ * If more irqs are added, this will need to be unique for each one.
+ */
+ ret = request_irq(xhci->msix_entries[0].vector, &xhci_irq, 0,
+ "xHCI", xhci_to_hcd(xhci));
+ if (ret) {
+ xhci_err(xhci, "Failed to allocate MSI-X interrupt\n");
+ goto disable_msix;
+ }
+ xhci_dbg(xhci, "Finished setting up MSI-X\n");
+ return 0;
+
+disable_msix:
+ pci_disable_msix(pdev);
+free_entries:
+ kfree(xhci->msix_entries);
+ xhci->msix_entries = NULL;
+ return ret;
+}
+
+/* XXX: code duplication; can xhci_setup_msix call this? */
+/* Free any IRQs and disable MSI-X */
+static void xhci_cleanup_msix(struct xhci_hcd *xhci)
+{
+ struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+ if (!xhci->msix_entries)
+ return;
+
+ free_irq(xhci->msix_entries[0].vector, xhci);
+ pci_disable_msix(pdev);
+ kfree(xhci->msix_entries);
+ xhci->msix_entries = NULL;
+ xhci_dbg(xhci, "Finished cleaning up MSI-X\n");
+}
+#endif
+
+/*
+ * Initialize memory for HCD and xHC (one-time init).
+ *
+ * Program the PAGESIZE register, initialize the device context array, create
+ * device contexts (?), set up a command ring segment (or two?), create event
+ * ring (one for now).
+ */
+int xhci_init(struct usb_hcd *hcd)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ int retval = 0;
+
+ xhci_dbg(xhci, "xhci_init\n");
+ spin_lock_init(&xhci->lock);
+ if (link_quirk) {
+ xhci_dbg(xhci, "QUIRK: Not clearing Link TRB chain bits.\n");
+ xhci->quirks |= XHCI_LINK_TRB_QUIRK;
+ } else {
+ xhci_dbg(xhci, "xHCI doesn't need link TRB QUIRK\n");
+ }
+ retval = xhci_mem_init(xhci, GFP_KERNEL);
+ xhci_dbg(xhci, "Finished xhci_init\n");
+
+ return retval;
+}
+
+/*
+ * Called in interrupt context when there might be work
+ * queued on the event ring
+ *
+ * xhci->lock must be held by caller.
+ */
+static void xhci_work(struct xhci_hcd *xhci)
+{
+ u32 temp;
+ u64 temp_64;
+
+ /*
+ * Clear the op reg interrupt status first,
+ * so we can receive interrupts from other MSI-X interrupters.
+ * Write 1 to clear the interrupt status.
+ */
+ temp = xhci_readl(xhci, &xhci->op_regs->status);
+ temp |= STS_EINT;
+ xhci_writel(xhci, temp, &xhci->op_regs->status);
+ /* FIXME when MSI-X is supported and there are multiple vectors */
+ /* Clear the MSI-X event interrupt status */
+
+ /* Acknowledge the interrupt */
+ temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+ temp |= 0x3;
+ xhci_writel(xhci, temp, &xhci->ir_set->irq_pending);
+ /* Flush posted writes */
+ xhci_readl(xhci, &xhci->ir_set->irq_pending);
+
+ if (xhci->xhc_state & XHCI_STATE_DYING)
+ xhci_dbg(xhci, "xHCI dying, ignoring interrupt. "
+ "Shouldn't IRQs be disabled?\n");
+ else
+ /* FIXME this should be a delayed service routine
+ * that clears the EHB.
+ */
+ xhci_handle_event(xhci);
+
+ /* Clear the event handler busy flag (RW1C); the event ring should be empty. */
+ temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+ xhci_write_64(xhci, temp_64 | ERST_EHB, &xhci->ir_set->erst_dequeue);
+ /* Flush posted writes -- FIXME is this necessary? */
+ xhci_readl(xhci, &xhci->ir_set->irq_pending);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * xHCI spec says we can get an interrupt, and if the HC has an error condition,
+ * we might get bad data out of the event ring. Section 4.10.2.7 has a list of
+ * indicators of an event TRB error, but we check the status *first* to be safe.
+ */
+irqreturn_t xhci_irq(struct usb_hcd *hcd)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ u32 temp, temp2;
+ union xhci_trb *trb;
+
+ spin_lock(&xhci->lock);
+ trb = xhci->event_ring->dequeue;
+ /* Check if the xHC generated the interrupt, or the irq is shared */
+ temp = xhci_readl(xhci, &xhci->op_regs->status);
+ temp2 = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+ if (temp == 0xffffffff && temp2 == 0xffffffff)
+ goto hw_died;
+
+ if (!(temp & STS_EINT) && !ER_IRQ_PENDING(temp2)) {
+ spin_unlock(&xhci->lock);
+ return IRQ_NONE;
+ }
+ xhci_dbg(xhci, "op reg status = %08x\n", temp);
+ xhci_dbg(xhci, "ir set irq_pending = %08x\n", temp2);
+ xhci_dbg(xhci, "Event ring dequeue ptr:\n");
+ xhci_dbg(xhci, "@%llx %08x %08x %08x %08x\n",
+ (unsigned long long)xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, trb),
+ lower_32_bits(trb->link.segment_ptr),
+ upper_32_bits(trb->link.segment_ptr),
+ (unsigned int) trb->link.intr_target,
+ (unsigned int) trb->link.control);
+
+ if (temp & STS_FATAL) {
+ xhci_warn(xhci, "WARNING: Host System Error\n");
+ xhci_halt(xhci);
+hw_died:
+ xhci_to_hcd(xhci)->state = HC_STATE_HALT;
+ spin_unlock(&xhci->lock);
+ return -ESHUTDOWN;
+ }
+
+ xhci_work(xhci);
+ spin_unlock(&xhci->lock);
+
+ return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
+void xhci_event_ring_work(unsigned long arg)
+{
+ unsigned long flags;
+ int temp;
+ u64 temp_64;
+ struct xhci_hcd *xhci = (struct xhci_hcd *) arg;
+ int i, j;
+
+ xhci_dbg(xhci, "Poll event ring: %lu\n", jiffies);
+
+ spin_lock_irqsave(&xhci->lock, flags);
+ temp = xhci_readl(xhci, &xhci->op_regs->status);
+ xhci_dbg(xhci, "op reg status = 0x%x\n", temp);
+ if (temp == 0xffffffff || (xhci->xhc_state & XHCI_STATE_DYING)) {
+ xhci_dbg(xhci, "HW died, polling stopped.\n");
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return;
+ }
+
+ temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+ xhci_dbg(xhci, "ir_set 0 pending = 0x%x\n", temp);
+ xhci_dbg(xhci, "No-op commands handled = %d\n", xhci->noops_handled);
+ xhci_dbg(xhci, "HC error bitmask = 0x%x\n", xhci->error_bitmask);
+ xhci->error_bitmask = 0;
+ xhci_dbg(xhci, "Event ring:\n");
+ xhci_debug_segment(xhci, xhci->event_ring->deq_seg);
+ xhci_dbg_ring_ptrs(xhci, xhci->event_ring);
+ temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+ temp_64 &= ~ERST_PTR_MASK;
+ xhci_dbg(xhci, "ERST deq = 64'h%0lx\n", (long unsigned int) temp_64);
+ xhci_dbg(xhci, "Command ring:\n");
+ xhci_debug_segment(xhci, xhci->cmd_ring->deq_seg);
+ xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring);
+ xhci_dbg_cmd_ptrs(xhci);
+ for (i = 0; i < MAX_HC_SLOTS; ++i) {
+ if (!xhci->devs[i])
+ continue;
+ for (j = 0; j < 31; ++j) {
+ struct xhci_ring *ring = xhci->devs[i]->eps[j].ring;
+ if (!ring)
+ continue;
+ xhci_dbg(xhci, "Dev %d endpoint ring %d:\n", i, j);
+ xhci_debug_segment(xhci, ring->deq_seg);
+ }
+ }
+
+ if (xhci->noops_submitted != NUM_TEST_NOOPS)
+ if (xhci_setup_one_noop(xhci))
+ xhci_ring_cmd_db(xhci);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ if (!xhci->zombie)
+ mod_timer(&xhci->event_ring_timer, jiffies + POLL_TIMEOUT * HZ);
+ else
+ xhci_dbg(xhci, "Quit polling the event ring.\n");
+}
+#endif
+
+/*
+ * Start the HC after it was halted.
+ *
+ * This function is called by the USB core when the HC driver is added.
+ * Its opposite is xhci_stop().
+ *
+ * xhci_init() must be called once before this function can be called.
+ * Reset the HC, enable device slot contexts, program DCBAAP, and
+ * set command ring pointer and event ring pointer.
+ *
+ * Setup MSI-X vectors and enable interrupts.
+ */
+int xhci_run(struct usb_hcd *hcd)
+{
+ u32 temp;
+ u64 temp_64;
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ void (*doorbell)(struct xhci_hcd *) = NULL;
+
+ hcd->uses_new_polling = 1;
+ hcd->poll_rh = 0;
+
+ xhci_dbg(xhci, "xhci_run\n");
+#if 0 /* FIXME: MSI not setup yet */
+ /* Do this at the very last minute */
+ ret = xhci_setup_msix(xhci);
+ if (!ret)
+ return ret;
+
+ return -ENOSYS;
+#endif
+#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
+ init_timer(&xhci->event_ring_timer);
+ xhci->event_ring_timer.data = (unsigned long) xhci;
+ xhci->event_ring_timer.function = xhci_event_ring_work;
+ /* Poll the event ring */
+ xhci->event_ring_timer.expires = jiffies + POLL_TIMEOUT * HZ;
+ xhci->zombie = 0;
+ xhci_dbg(xhci, "Setting event ring polling timer\n");
+ add_timer(&xhci->event_ring_timer);
+#endif
+
+ xhci_dbg(xhci, "Command ring memory map follows:\n");
+ xhci_debug_ring(xhci, xhci->cmd_ring);
+ xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring);
+ xhci_dbg_cmd_ptrs(xhci);
+
+ xhci_dbg(xhci, "ERST memory map follows:\n");
+ xhci_dbg_erst(xhci, &xhci->erst);
+ xhci_dbg(xhci, "Event ring:\n");
+ xhci_debug_ring(xhci, xhci->event_ring);
+ xhci_dbg_ring_ptrs(xhci, xhci->event_ring);
+ temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+ temp_64 &= ~ERST_PTR_MASK;
+ xhci_dbg(xhci, "ERST deq = 64'h%0lx\n", (long unsigned int) temp_64);
+
+ xhci_dbg(xhci, "// Set the interrupt modulation register\n");
+ temp = xhci_readl(xhci, &xhci->ir_set->irq_control);
+ temp &= ~ER_IRQ_INTERVAL_MASK;
+ temp |= (u32) 160;
+ xhci_writel(xhci, temp, &xhci->ir_set->irq_control);
+
+ /* Set the HCD state before we enable the irqs */
+ hcd->state = HC_STATE_RUNNING;
+ temp = xhci_readl(xhci, &xhci->op_regs->command);
+ temp |= (CMD_EIE);
+ xhci_dbg(xhci, "// Enable interrupts, cmd = 0x%x.\n",
+ temp);
+ xhci_writel(xhci, temp, &xhci->op_regs->command);
+
+ temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+ xhci_dbg(xhci, "// Enabling event ring interrupter %p by writing 0x%x to irq_pending\n",
+ xhci->ir_set, (unsigned int) ER_IRQ_ENABLE(temp));
+ xhci_writel(xhci, ER_IRQ_ENABLE(temp),
+ &xhci->ir_set->irq_pending);
+ xhci_print_ir_set(xhci, xhci->ir_set, 0);
+
+ if (NUM_TEST_NOOPS > 0)
+ doorbell = xhci_setup_one_noop(xhci);
+
+ temp = xhci_readl(xhci, &xhci->op_regs->command);
+ temp |= (CMD_RUN);
+ xhci_dbg(xhci, "// Turn on HC, cmd = 0x%x.\n",
+ temp);
+ xhci_writel(xhci, temp, &xhci->op_regs->command);
+ /* Flush PCI posted writes */
+ temp = xhci_readl(xhci, &xhci->op_regs->command);
+ xhci_dbg(xhci, "// @%p = 0x%x\n", &xhci->op_regs->command, temp);
+ if (doorbell)
+ (*doorbell)(xhci);
+
+ xhci_dbg(xhci, "Finished xhci_run\n");
+ return 0;
+}
+
+/*
+ * Stop xHCI driver.
+ *
+ * This function is called by the USB core when the HC driver is removed.
+ * Its opposite is xhci_run().
+ *
+ * Disable device contexts, disable IRQs, and quiesce the HC.
+ * Reset the HC, finish any completed transactions, and cleanup memory.
+ */
+void xhci_stop(struct usb_hcd *hcd)
+{
+ u32 temp;
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+
+ spin_lock_irq(&xhci->lock);
+ xhci_halt(xhci);
+ xhci_reset(xhci);
+ spin_unlock_irq(&xhci->lock);
+
+#if 0 /* No MSI yet */
+ xhci_cleanup_msix(xhci);
+#endif
+#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
+ /* Tell the event ring poll function not to reschedule */
+ xhci->zombie = 1;
+ del_timer_sync(&xhci->event_ring_timer);
+#endif
+
+ xhci_dbg(xhci, "// Disabling event ring interrupts\n");
+ temp = xhci_readl(xhci, &xhci->op_regs->status);
+ xhci_writel(xhci, temp & ~STS_EINT, &xhci->op_regs->status);
+ temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+ xhci_writel(xhci, ER_IRQ_DISABLE(temp),
+ &xhci->ir_set->irq_pending);
+ xhci_print_ir_set(xhci, xhci->ir_set, 0);
+
+ xhci_dbg(xhci, "cleaning up memory\n");
+ xhci_mem_cleanup(xhci);
+ xhci_dbg(xhci, "xhci_stop completed - status = %x\n",
+ xhci_readl(xhci, &xhci->op_regs->status));
+}
+
+/*
+ * Shutdown HC (not bus-specific)
+ *
+ * This is called when the machine is rebooting or halting. We assume that the
+ * machine will be powered off, and the HC's internal state will be reset.
+ * Don't bother to free memory.
+ */
+void xhci_shutdown(struct usb_hcd *hcd)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+
+ spin_lock_irq(&xhci->lock);
+ xhci_halt(xhci);
+ spin_unlock_irq(&xhci->lock);
+
+#if 0
+ xhci_cleanup_msix(xhci);
+#endif
+
+ xhci_dbg(xhci, "xhci_shutdown completed - status = %x\n",
+ xhci_readl(xhci, &xhci->op_regs->status));
+}
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * xhci_get_endpoint_index - Used for passing endpoint bitmasks between the core and
+ * HCDs. Find the index for an endpoint given its descriptor. Use the return
+ * value to right shift 1 for the bitmask.
+ *
+ * Index = (epnum * 2) + direction - 1,
+ * where direction = 0 for OUT, 1 for IN.
+ * For control endpoints, the IN index is used (OUT index is unused), so
+ * index = (epnum * 2) + direction - 1 = (epnum * 2) + 1 - 1 = (epnum * 2)
+ */
+unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc)
+{
+ unsigned int index;
+ if (usb_endpoint_xfer_control(desc))
+ index = (unsigned int) (usb_endpoint_num(desc)*2);
+ else
+ index = (unsigned int) (usb_endpoint_num(desc)*2) +
+ (usb_endpoint_dir_in(desc) ? 1 : 0) - 1;
+ return index;
+}
+
+/* Find the flag for this endpoint (for use in the control context). Use the
+ * endpoint index to create a bitmask. The slot context is bit 0, endpoint 0 is
+ * bit 1, etc.
+ */
+unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc)
+{
+ return 1 << (xhci_get_endpoint_index(desc) + 1);
+}
+
+/* Find the flag for this endpoint (for use in the control context). Use the
+ * endpoint index to create a bitmask. The slot context is bit 0, endpoint 0 is
+ * bit 1, etc.
+ */
+unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index)
+{
+ return 1 << (ep_index + 1);
+}
+
+/* Compute the last valid endpoint context index. Basically, this is the
+ * endpoint index plus one. For slot contexts with more than valid endpoint,
+ * we find the most significant bit set in the added contexts flags.
+ * e.g. ep 1 IN (with epnum 0x81) => added_ctxs = 0b1000
+ * fls(0b1000) = 4, but the endpoint context index is 3, so subtract one.
+ */
+unsigned int xhci_last_valid_endpoint(u32 added_ctxs)
+{
+ return fls(added_ctxs) - 1;
+}
+
+/* Returns 1 if the arguments are OK;
+ * returns 0 this is a root hub; returns -EINVAL for NULL pointers.
+ */
+int xhci_check_args(struct usb_hcd *hcd, struct usb_device *udev,
+ struct usb_host_endpoint *ep, int check_ep, const char *func) {
+ if (!hcd || (check_ep && !ep) || !udev) {
+ printk(KERN_DEBUG "xHCI %s called with invalid args\n",
+ func);
+ return -EINVAL;
+ }
+ if (!udev->parent) {
+ printk(KERN_DEBUG "xHCI %s called for root hub\n",
+ func);
+ return 0;
+ }
+ if (!udev->slot_id) {
+ printk(KERN_DEBUG "xHCI %s called with unaddressed device\n",
+ func);
+ return -EINVAL;
+ }
+ return 1;
+}
+
+static int xhci_configure_endpoint(struct xhci_hcd *xhci,
+ struct usb_device *udev, struct xhci_command *command,
+ bool ctx_change, bool must_succeed);
+
+/*
+ * Full speed devices may have a max packet size greater than 8 bytes, but the
+ * USB core doesn't know that until it reads the first 8 bytes of the
+ * descriptor. If the usb_device's max packet size changes after that point,
+ * we need to issue an evaluate context command and wait on it.
+ */
+static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id,
+ unsigned int ep_index, struct urb *urb)
+{
+ struct xhci_container_ctx *in_ctx;
+ struct xhci_container_ctx *out_ctx;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ struct xhci_ep_ctx *ep_ctx;
+ int max_packet_size;
+ int hw_max_packet_size;
+ int ret = 0;
+
+ out_ctx = xhci->devs[slot_id]->out_ctx;
+ ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
+ hw_max_packet_size = MAX_PACKET_DECODED(ep_ctx->ep_info2);
+ max_packet_size = urb->dev->ep0.desc.wMaxPacketSize;
+ if (hw_max_packet_size != max_packet_size) {
+ xhci_dbg(xhci, "Max Packet Size for ep 0 changed.\n");
+ xhci_dbg(xhci, "Max packet size in usb_device = %d\n",
+ max_packet_size);
+ xhci_dbg(xhci, "Max packet size in xHCI HW = %d\n",
+ hw_max_packet_size);
+ xhci_dbg(xhci, "Issuing evaluate context command.\n");
+
+ /* Set up the modified control endpoint 0 */
+ xhci_endpoint_copy(xhci, xhci->devs[slot_id]->in_ctx,
+ xhci->devs[slot_id]->out_ctx, ep_index);
+ in_ctx = xhci->devs[slot_id]->in_ctx;
+ ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index);
+ ep_ctx->ep_info2 &= ~MAX_PACKET_MASK;
+ ep_ctx->ep_info2 |= MAX_PACKET(max_packet_size);
+
+ /* Set up the input context flags for the command */
+ /* FIXME: This won't work if a non-default control endpoint
+ * changes max packet sizes.
+ */
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
+ ctrl_ctx->add_flags = EP0_FLAG;
+ ctrl_ctx->drop_flags = 0;
+
+ xhci_dbg(xhci, "Slot %d input context\n", slot_id);
+ xhci_dbg_ctx(xhci, in_ctx, ep_index);
+ xhci_dbg(xhci, "Slot %d output context\n", slot_id);
+ xhci_dbg_ctx(xhci, out_ctx, ep_index);
+
+ ret = xhci_configure_endpoint(xhci, urb->dev, NULL,
+ true, false);
+
+ /* Clean up the input context for later use by bandwidth
+ * functions.
+ */
+ ctrl_ctx->add_flags = SLOT_FLAG;
+ }
+ return ret;
+}
+
+/*
+ * non-error returns are a promise to giveback() the urb later
+ * we drop ownership so next owner (or urb unlink) can get it
+ */
+int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ unsigned long flags;
+ int ret = 0;
+ unsigned int slot_id, ep_index;
+
+
+ if (!urb || xhci_check_args(hcd, urb->dev, urb->ep, true, __func__) <= 0)
+ return -EINVAL;
+
+ slot_id = urb->dev->slot_id;
+ ep_index = xhci_get_endpoint_index(&urb->ep->desc);
+
+ if (!xhci->devs || !xhci->devs[slot_id]) {
+ if (!in_interrupt())
+ dev_warn(&urb->dev->dev, "WARN: urb submitted for dev with no Slot ID\n");
+ ret = -EINVAL;
+ goto exit;
+ }
+ if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+ if (!in_interrupt())
+ xhci_dbg(xhci, "urb submitted during PCI suspend\n");
+ ret = -ESHUTDOWN;
+ goto exit;
+ }
+ if (usb_endpoint_xfer_control(&urb->ep->desc)) {
+ /* Check to see if the max packet size for the default control
+ * endpoint changed during FS device enumeration
+ */
+ if (urb->dev->speed == USB_SPEED_FULL) {
+ ret = xhci_check_maxpacket(xhci, slot_id,
+ ep_index, urb);
+ if (ret < 0)
+ return ret;
+ }
+
+ /* We have a spinlock and interrupts disabled, so we must pass
+ * atomic context to this function, which may allocate memory.
+ */
+ spin_lock_irqsave(&xhci->lock, flags);
+ if (xhci->xhc_state & XHCI_STATE_DYING)
+ goto dying;
+ ret = xhci_queue_ctrl_tx(xhci, GFP_ATOMIC, urb,
+ slot_id, ep_index);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ } else if (usb_endpoint_xfer_bulk(&urb->ep->desc)) {
+ spin_lock_irqsave(&xhci->lock, flags);
+ if (xhci->xhc_state & XHCI_STATE_DYING)
+ goto dying;
+ ret = xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb,
+ slot_id, ep_index);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ } else if (usb_endpoint_xfer_int(&urb->ep->desc)) {
+ spin_lock_irqsave(&xhci->lock, flags);
+ if (xhci->xhc_state & XHCI_STATE_DYING)
+ goto dying;
+ ret = xhci_queue_intr_tx(xhci, GFP_ATOMIC, urb,
+ slot_id, ep_index);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ } else {
+ ret = -EINVAL;
+ }
+exit:
+ return ret;
+dying:
+ xhci_dbg(xhci, "Ep 0x%x: URB %p submitted for "
+ "non-responsive xHCI host.\n",
+ urb->ep->desc.bEndpointAddress, urb);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return -ESHUTDOWN;
+}
+
+/*
+ * Remove the URB's TD from the endpoint ring. This may cause the HC to stop
+ * USB transfers, potentially stopping in the middle of a TRB buffer. The HC
+ * should pick up where it left off in the TD, unless a Set Transfer Ring
+ * Dequeue Pointer is issued.
+ *
+ * The TRBs that make up the buffers for the canceled URB will be "removed" from
+ * the ring. Since the ring is a contiguous structure, they can't be physically
+ * removed. Instead, there are two options:
+ *
+ * 1) If the HC is in the middle of processing the URB to be canceled, we
+ * simply move the ring's dequeue pointer past those TRBs using the Set
+ * Transfer Ring Dequeue Pointer command. This will be the common case,
+ * when drivers timeout on the last submitted URB and attempt to cancel.
+ *
+ * 2) If the HC is in the middle of a different TD, we turn the TRBs into a
+ * series of 1-TRB transfer no-op TDs. (No-ops shouldn't be chained.) The
+ * HC will need to invalidate the any TRBs it has cached after the stop
+ * endpoint command, as noted in the xHCI 0.95 errata.
+ *
+ * 3) The TD may have completed by the time the Stop Endpoint Command
+ * completes, so software needs to handle that case too.
+ *
+ * This function should protect against the TD enqueueing code ringing the
+ * doorbell while this code is waiting for a Stop Endpoint command to complete.
+ * It also needs to account for multiple cancellations on happening at the same
+ * time for the same endpoint.
+ *
+ * Note that this function can be called in any context, or so says
+ * usb_hcd_unlink_urb()
+ */
+int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+ unsigned long flags;
+ int ret;
+ u32 temp;
+ struct xhci_hcd *xhci;
+ struct xhci_td *td;
+ unsigned int ep_index;
+ struct xhci_ring *ep_ring;
+ struct xhci_virt_ep *ep;
+
+ xhci = hcd_to_xhci(hcd);
+ spin_lock_irqsave(&xhci->lock, flags);
+ /* Make sure the URB hasn't completed or been unlinked already */
+ ret = usb_hcd_check_unlink_urb(hcd, urb, status);
+ if (ret || !urb->hcpriv)
+ goto done;
+ temp = xhci_readl(xhci, &xhci->op_regs->status);
+ if (temp == 0xffffffff) {
+ xhci_dbg(xhci, "HW died, freeing TD.\n");
+ td = (struct xhci_td *) urb->hcpriv;
+
+ usb_hcd_unlink_urb_from_ep(hcd, urb);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, -ESHUTDOWN);
+ kfree(td);
+ return ret;
+ }
+ if (xhci->xhc_state & XHCI_STATE_DYING) {
+ xhci_dbg(xhci, "Ep 0x%x: URB %p to be canceled on "
+ "non-responsive xHCI host.\n",
+ urb->ep->desc.bEndpointAddress, urb);
+ /* Let the stop endpoint command watchdog timer (which set this
+ * state) finish cleaning up the endpoint TD lists. We must
+ * have caught it in the middle of dropping a lock and giving
+ * back an URB.
+ */
+ goto done;
+ }
+
+ xhci_dbg(xhci, "Cancel URB %p\n", urb);
+ xhci_dbg(xhci, "Event ring:\n");
+ xhci_debug_ring(xhci, xhci->event_ring);
+ ep_index = xhci_get_endpoint_index(&urb->ep->desc);
+ ep = &xhci->devs[urb->dev->slot_id]->eps[ep_index];
+ ep_ring = ep->ring;
+ xhci_dbg(xhci, "Endpoint ring:\n");
+ xhci_debug_ring(xhci, ep_ring);
+ td = (struct xhci_td *) urb->hcpriv;
+
+ list_add_tail(&td->cancelled_td_list, &ep->cancelled_td_list);
+ /* Queue a stop endpoint command, but only if this is
+ * the first cancellation to be handled.
+ */
+ if (!(ep->ep_state & EP_HALT_PENDING)) {
+ ep->ep_state |= EP_HALT_PENDING;
+ ep->stop_cmds_pending++;
+ ep->stop_cmd_timer.expires = jiffies +
+ XHCI_STOP_EP_CMD_TIMEOUT * HZ;
+ add_timer(&ep->stop_cmd_timer);
+ xhci_queue_stop_endpoint(xhci, urb->dev->slot_id, ep_index);
+ xhci_ring_cmd_db(xhci);
+ }
+done:
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return ret;
+}
+
+/* Drop an endpoint from a new bandwidth configuration for this device.
+ * Only one call to this function is allowed per endpoint before
+ * check_bandwidth() or reset_bandwidth() must be called.
+ * A call to xhci_drop_endpoint() followed by a call to xhci_add_endpoint() will
+ * add the endpoint to the schedule with possibly new parameters denoted by a
+ * different endpoint descriptor in usb_host_endpoint.
+ * A call to xhci_add_endpoint() followed by a call to xhci_drop_endpoint() is
+ * not allowed.
+ *
+ * The USB core will not allow URBs to be queued to an endpoint that is being
+ * disabled, so there's no need for mutual exclusion to protect
+ * the xhci->devs[slot_id] structure.
+ */
+int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ struct xhci_hcd *xhci;
+ struct xhci_container_ctx *in_ctx, *out_ctx;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ struct xhci_slot_ctx *slot_ctx;
+ unsigned int last_ctx;
+ unsigned int ep_index;
+ struct xhci_ep_ctx *ep_ctx;
+ u32 drop_flag;
+ u32 new_add_flags, new_drop_flags, new_slot_info;
+ int ret;
+
+ ret = xhci_check_args(hcd, udev, ep, 1, __func__);
+ if (ret <= 0)
+ return ret;
+ xhci = hcd_to_xhci(hcd);
+ xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
+
+ drop_flag = xhci_get_endpoint_flag(&ep->desc);
+ if (drop_flag == SLOT_FLAG || drop_flag == EP0_FLAG) {
+ xhci_dbg(xhci, "xHCI %s - can't drop slot or ep 0 %#x\n",
+ __func__, drop_flag);
+ return 0;
+ }
+
+ if (!xhci->devs || !xhci->devs[udev->slot_id]) {
+ xhci_warn(xhci, "xHCI %s called with unaddressed device\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ in_ctx = xhci->devs[udev->slot_id]->in_ctx;
+ out_ctx = xhci->devs[udev->slot_id]->out_ctx;
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
+ ep_index = xhci_get_endpoint_index(&ep->desc);
+ ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
+ /* If the HC already knows the endpoint is disabled,
+ * or the HCD has noted it is disabled, ignore this request
+ */
+ if ((ep_ctx->ep_info & EP_STATE_MASK) == EP_STATE_DISABLED ||
+ ctrl_ctx->drop_flags & xhci_get_endpoint_flag(&ep->desc)) {
+ xhci_warn(xhci, "xHCI %s called with disabled ep %p\n",
+ __func__, ep);
+ return 0;
+ }
+
+ ctrl_ctx->drop_flags |= drop_flag;
+ new_drop_flags = ctrl_ctx->drop_flags;
+
+ ctrl_ctx->add_flags &= ~drop_flag;
+ new_add_flags = ctrl_ctx->add_flags;
+
+ last_ctx = xhci_last_valid_endpoint(ctrl_ctx->add_flags);
+ slot_ctx = xhci_get_slot_ctx(xhci, in_ctx);
+ /* Update the last valid endpoint context, if we deleted the last one */
+ if ((slot_ctx->dev_info & LAST_CTX_MASK) > LAST_CTX(last_ctx)) {
+ slot_ctx->dev_info &= ~LAST_CTX_MASK;
+ slot_ctx->dev_info |= LAST_CTX(last_ctx);
+ }
+ new_slot_info = slot_ctx->dev_info;
+
+ xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep);
+
+ xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x, new slot info = %#x\n",
+ (unsigned int) ep->desc.bEndpointAddress,
+ udev->slot_id,
+ (unsigned int) new_drop_flags,
+ (unsigned int) new_add_flags,
+ (unsigned int) new_slot_info);
+ return 0;
+}
+
+/* Add an endpoint to a new possible bandwidth configuration for this device.
+ * Only one call to this function is allowed per endpoint before
+ * check_bandwidth() or reset_bandwidth() must be called.
+ * A call to xhci_drop_endpoint() followed by a call to xhci_add_endpoint() will
+ * add the endpoint to the schedule with possibly new parameters denoted by a
+ * different endpoint descriptor in usb_host_endpoint.
+ * A call to xhci_add_endpoint() followed by a call to xhci_drop_endpoint() is
+ * not allowed.
+ *
+ * The USB core will not allow URBs to be queued to an endpoint until the
+ * configuration or alt setting is installed in the device, so there's no need
+ * for mutual exclusion to protect the xhci->devs[slot_id] structure.
+ */
+int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ struct xhci_hcd *xhci;
+ struct xhci_container_ctx *in_ctx, *out_ctx;
+ unsigned int ep_index;
+ struct xhci_ep_ctx *ep_ctx;
+ struct xhci_slot_ctx *slot_ctx;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ u32 added_ctxs;
+ unsigned int last_ctx;
+ u32 new_add_flags, new_drop_flags, new_slot_info;
+ int ret = 0;
+
+ ret = xhci_check_args(hcd, udev, ep, 1, __func__);
+ if (ret <= 0) {
+ /* So we won't queue a reset ep command for a root hub */
+ ep->hcpriv = NULL;
+ return ret;
+ }
+ xhci = hcd_to_xhci(hcd);
+
+ added_ctxs = xhci_get_endpoint_flag(&ep->desc);
+ last_ctx = xhci_last_valid_endpoint(added_ctxs);
+ if (added_ctxs == SLOT_FLAG || added_ctxs == EP0_FLAG) {
+ /* FIXME when we have to issue an evaluate endpoint command to
+ * deal with ep0 max packet size changing once we get the
+ * descriptors
+ */
+ xhci_dbg(xhci, "xHCI %s - can't add slot or ep 0 %#x\n",
+ __func__, added_ctxs);
+ return 0;
+ }
+
+ if (!xhci->devs || !xhci->devs[udev->slot_id]) {
+ xhci_warn(xhci, "xHCI %s called with unaddressed device\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ in_ctx = xhci->devs[udev->slot_id]->in_ctx;
+ out_ctx = xhci->devs[udev->slot_id]->out_ctx;
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
+ ep_index = xhci_get_endpoint_index(&ep->desc);
+ ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
+ /* If the HCD has already noted the endpoint is enabled,
+ * ignore this request.
+ */
+ if (ctrl_ctx->add_flags & xhci_get_endpoint_flag(&ep->desc)) {
+ xhci_warn(xhci, "xHCI %s called with enabled ep %p\n",
+ __func__, ep);
+ return 0;
+ }
+
+ /*
+ * Configuration and alternate setting changes must be done in
+ * process context, not interrupt context (or so documenation
+ * for usb_set_interface() and usb_set_configuration() claim).
+ */
+ if (xhci_endpoint_init(xhci, xhci->devs[udev->slot_id],
+ udev, ep, GFP_NOIO) < 0) {
+ dev_dbg(&udev->dev, "%s - could not initialize ep %#x\n",
+ __func__, ep->desc.bEndpointAddress);
+ return -ENOMEM;
+ }
+
+ ctrl_ctx->add_flags |= added_ctxs;
+ new_add_flags = ctrl_ctx->add_flags;
+
+ /* If xhci_endpoint_disable() was called for this endpoint, but the
+ * xHC hasn't been notified yet through the check_bandwidth() call,
+ * this re-adds a new state for the endpoint from the new endpoint
+ * descriptors. We must drop and re-add this endpoint, so we leave the
+ * drop flags alone.
+ */
+ new_drop_flags = ctrl_ctx->drop_flags;
+
+ slot_ctx = xhci_get_slot_ctx(xhci, in_ctx);
+ /* Update the last valid endpoint context, if we just added one past */
+ if ((slot_ctx->dev_info & LAST_CTX_MASK) < LAST_CTX(last_ctx)) {
+ slot_ctx->dev_info &= ~LAST_CTX_MASK;
+ slot_ctx->dev_info |= LAST_CTX(last_ctx);
+ }
+ new_slot_info = slot_ctx->dev_info;
+
+ /* Store the usb_device pointer for later use */
+ ep->hcpriv = udev;
+
+ xhci_dbg(xhci, "add ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x, new slot info = %#x\n",
+ (unsigned int) ep->desc.bEndpointAddress,
+ udev->slot_id,
+ (unsigned int) new_drop_flags,
+ (unsigned int) new_add_flags,
+ (unsigned int) new_slot_info);
+ return 0;
+}
+
+static void xhci_zero_in_ctx(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev)
+{
+ struct xhci_input_control_ctx *ctrl_ctx;
+ struct xhci_ep_ctx *ep_ctx;
+ struct xhci_slot_ctx *slot_ctx;
+ int i;
+
+ /* When a device's add flag and drop flag are zero, any subsequent
+ * configure endpoint command will leave that endpoint's state
+ * untouched. Make sure we don't leave any old state in the input
+ * endpoint contexts.
+ */
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
+ ctrl_ctx->drop_flags = 0;
+ ctrl_ctx->add_flags = 0;
+ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
+ slot_ctx->dev_info &= ~LAST_CTX_MASK;
+ /* Endpoint 0 is always valid */
+ slot_ctx->dev_info |= LAST_CTX(1);
+ for (i = 1; i < 31; ++i) {
+ ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, i);
+ ep_ctx->ep_info = 0;
+ ep_ctx->ep_info2 = 0;
+ ep_ctx->deq = 0;
+ ep_ctx->tx_info = 0;
+ }
+}
+
+static int xhci_configure_endpoint_result(struct xhci_hcd *xhci,
+ struct usb_device *udev, int *cmd_status)
+{
+ int ret;
+
+ switch (*cmd_status) {
+ case COMP_ENOMEM:
+ dev_warn(&udev->dev, "Not enough host controller resources "
+ "for new device state.\n");
+ ret = -ENOMEM;
+ /* FIXME: can we allocate more resources for the HC? */
+ break;
+ case COMP_BW_ERR:
+ dev_warn(&udev->dev, "Not enough bandwidth "
+ "for new device state.\n");
+ ret = -ENOSPC;
+ /* FIXME: can we go back to the old state? */
+ break;
+ case COMP_TRB_ERR:
+ /* the HCD set up something wrong */
+ dev_warn(&udev->dev, "ERROR: Endpoint drop flag = 0, "
+ "add flag = 1, "
+ "and endpoint is not disabled.\n");
+ ret = -EINVAL;
+ break;
+ case COMP_SUCCESS:
+ dev_dbg(&udev->dev, "Successful Endpoint Configure command\n");
+ ret = 0;
+ break;
+ default:
+ xhci_err(xhci, "ERROR: unexpected command completion "
+ "code 0x%x.\n", *cmd_status);
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static int xhci_evaluate_context_result(struct xhci_hcd *xhci,
+ struct usb_device *udev, int *cmd_status)
+{
+ int ret;
+ struct xhci_virt_device *virt_dev = xhci->devs[udev->slot_id];
+
+ switch (*cmd_status) {
+ case COMP_EINVAL:
+ dev_warn(&udev->dev, "WARN: xHCI driver setup invalid evaluate "
+ "context command.\n");
+ ret = -EINVAL;
+ break;
+ case COMP_EBADSLT:
+ dev_warn(&udev->dev, "WARN: slot not enabled for"
+ "evaluate context command.\n");
+ case COMP_CTX_STATE:
+ dev_warn(&udev->dev, "WARN: invalid context state for "
+ "evaluate context command.\n");
+ xhci_dbg_ctx(xhci, virt_dev->out_ctx, 1);
+ ret = -EINVAL;
+ break;
+ case COMP_SUCCESS:
+ dev_dbg(&udev->dev, "Successful evaluate context command\n");
+ ret = 0;
+ break;
+ default:
+ xhci_err(xhci, "ERROR: unexpected command completion "
+ "code 0x%x.\n", *cmd_status);
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+/* Issue a configure endpoint command or evaluate context command
+ * and wait for it to finish.
+ */
+static int xhci_configure_endpoint(struct xhci_hcd *xhci,
+ struct usb_device *udev,
+ struct xhci_command *command,
+ bool ctx_change, bool must_succeed)
+{
+ int ret;
+ int timeleft;
+ unsigned long flags;
+ struct xhci_container_ctx *in_ctx;
+ struct completion *cmd_completion;
+ int *cmd_status;
+ struct xhci_virt_device *virt_dev;
+
+ spin_lock_irqsave(&xhci->lock, flags);
+ virt_dev = xhci->devs[udev->slot_id];
+ if (command) {
+ in_ctx = command->in_ctx;
+ cmd_completion = command->completion;
+ cmd_status = &command->status;
+ command->command_trb = xhci->cmd_ring->enqueue;
+ list_add_tail(&command->cmd_list, &virt_dev->cmd_list);
+ } else {
+ in_ctx = virt_dev->in_ctx;
+ cmd_completion = &virt_dev->cmd_completion;
+ cmd_status = &virt_dev->cmd_status;
+ }
+ init_completion(cmd_completion);
+
+ if (!ctx_change)
+ ret = xhci_queue_configure_endpoint(xhci, in_ctx->dma,
+ udev->slot_id, must_succeed);
+ else
+ ret = xhci_queue_evaluate_context(xhci, in_ctx->dma,
+ udev->slot_id);
+ if (ret < 0) {
+ if (command)
+ list_del(&command->cmd_list);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_dbg(xhci, "FIXME allocate a new ring segment\n");
+ return -ENOMEM;
+ }
+ xhci_ring_cmd_db(xhci);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ /* Wait for the configure endpoint command to complete */
+ timeleft = wait_for_completion_interruptible_timeout(
+ cmd_completion,
+ USB_CTRL_SET_TIMEOUT);
+ if (timeleft <= 0) {
+ xhci_warn(xhci, "%s while waiting for %s command\n",
+ timeleft == 0 ? "Timeout" : "Signal",
+ ctx_change == 0 ?
+ "configure endpoint" :
+ "evaluate context");
+ /* FIXME cancel the configure endpoint command */
+ return -ETIME;
+ }
+
+ if (!ctx_change)
+ return xhci_configure_endpoint_result(xhci, udev, cmd_status);
+ return xhci_evaluate_context_result(xhci, udev, cmd_status);
+}
+
+/* Called after one or more calls to xhci_add_endpoint() or
+ * xhci_drop_endpoint(). If this call fails, the USB core is expected
+ * to call xhci_reset_bandwidth().
+ *
+ * Since we are in the middle of changing either configuration or
+ * installing a new alt setting, the USB core won't allow URBs to be
+ * enqueued for any endpoint on the old config or interface. Nothing
+ * else should be touching the xhci->devs[slot_id] structure, so we
+ * don't need to take the xhci->lock for manipulating that.
+ */
+int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
+{
+ int i;
+ int ret = 0;
+ struct xhci_hcd *xhci;
+ struct xhci_virt_device *virt_dev;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ struct xhci_slot_ctx *slot_ctx;
+
+ ret = xhci_check_args(hcd, udev, NULL, 0, __func__);
+ if (ret <= 0)
+ return ret;
+ xhci = hcd_to_xhci(hcd);
+
+ if (!udev->slot_id || !xhci->devs || !xhci->devs[udev->slot_id]) {
+ xhci_warn(xhci, "xHCI %s called with unaddressed device\n",
+ __func__);
+ return -EINVAL;
+ }
+ xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
+ virt_dev = xhci->devs[udev->slot_id];
+
+ /* See section 4.6.6 - A0 = 1; A1 = D0 = D1 = 0 */
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
+ ctrl_ctx->add_flags |= SLOT_FLAG;
+ ctrl_ctx->add_flags &= ~EP0_FLAG;
+ ctrl_ctx->drop_flags &= ~SLOT_FLAG;
+ ctrl_ctx->drop_flags &= ~EP0_FLAG;
+ xhci_dbg(xhci, "New Input Control Context:\n");
+ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
+ xhci_dbg_ctx(xhci, virt_dev->in_ctx,
+ LAST_CTX_TO_EP_NUM(slot_ctx->dev_info));
+
+ ret = xhci_configure_endpoint(xhci, udev, NULL,
+ false, false);
+ if (ret) {
+ /* Callee should call reset_bandwidth() */
+ return ret;
+ }
+
+ xhci_dbg(xhci, "Output context after successful config ep cmd:\n");
+ xhci_dbg_ctx(xhci, virt_dev->out_ctx,
+ LAST_CTX_TO_EP_NUM(slot_ctx->dev_info));
+
+ xhci_zero_in_ctx(xhci, virt_dev);
+ /* Install new rings and free or cache any old rings */
+ for (i = 1; i < 31; ++i) {
+ if (!virt_dev->eps[i].new_ring)
+ continue;
+ /* Only cache or free the old ring if it exists.
+ * It may not if this is the first add of an endpoint.
+ */
+ if (virt_dev->eps[i].ring) {
+ xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i);
+ }
+ virt_dev->eps[i].ring = virt_dev->eps[i].new_ring;
+ virt_dev->eps[i].new_ring = NULL;
+ }
+
+ return ret;
+}
+
+void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
+{
+ struct xhci_hcd *xhci;
+ struct xhci_virt_device *virt_dev;
+ int i, ret;
+
+ ret = xhci_check_args(hcd, udev, NULL, 0, __func__);
+ if (ret <= 0)
+ return;
+ xhci = hcd_to_xhci(hcd);
+
+ if (!xhci->devs || !xhci->devs[udev->slot_id]) {
+ xhci_warn(xhci, "xHCI %s called with unaddressed device\n",
+ __func__);
+ return;
+ }
+ xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
+ virt_dev = xhci->devs[udev->slot_id];
+ /* Free any rings allocated for added endpoints */
+ for (i = 0; i < 31; ++i) {
+ if (virt_dev->eps[i].new_ring) {
+ xhci_ring_free(xhci, virt_dev->eps[i].new_ring);
+ virt_dev->eps[i].new_ring = NULL;
+ }
+ }
+ xhci_zero_in_ctx(xhci, virt_dev);
+}
+
+static void xhci_setup_input_ctx_for_config_ep(struct xhci_hcd *xhci,
+ struct xhci_container_ctx *in_ctx,
+ struct xhci_container_ctx *out_ctx,
+ u32 add_flags, u32 drop_flags)
+{
+ struct xhci_input_control_ctx *ctrl_ctx;
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
+ ctrl_ctx->add_flags = add_flags;
+ ctrl_ctx->drop_flags = drop_flags;
+ xhci_slot_copy(xhci, in_ctx, out_ctx);
+ ctrl_ctx->add_flags |= SLOT_FLAG;
+
+ xhci_dbg(xhci, "Input Context:\n");
+ xhci_dbg_ctx(xhci, in_ctx, xhci_last_valid_endpoint(add_flags));
+}
+
+void xhci_setup_input_ctx_for_quirk(struct xhci_hcd *xhci,
+ unsigned int slot_id, unsigned int ep_index,
+ struct xhci_dequeue_state *deq_state)
+{
+ struct xhci_container_ctx *in_ctx;
+ struct xhci_ep_ctx *ep_ctx;
+ u32 added_ctxs;
+ dma_addr_t addr;
+
+ xhci_endpoint_copy(xhci, xhci->devs[slot_id]->in_ctx,
+ xhci->devs[slot_id]->out_ctx, ep_index);
+ in_ctx = xhci->devs[slot_id]->in_ctx;
+ ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index);
+ addr = xhci_trb_virt_to_dma(deq_state->new_deq_seg,
+ deq_state->new_deq_ptr);
+ if (addr == 0) {
+ xhci_warn(xhci, "WARN Cannot submit config ep after "
+ "reset ep command\n");
+ xhci_warn(xhci, "WARN deq seg = %p, deq ptr = %p\n",
+ deq_state->new_deq_seg,
+ deq_state->new_deq_ptr);
+ return;
+ }
+ ep_ctx->deq = addr | deq_state->new_cycle_state;
+
+ added_ctxs = xhci_get_endpoint_flag_from_index(ep_index);
+ xhci_setup_input_ctx_for_config_ep(xhci, xhci->devs[slot_id]->in_ctx,
+ xhci->devs[slot_id]->out_ctx, added_ctxs, added_ctxs);
+}
+
+void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci,
+ struct usb_device *udev, unsigned int ep_index)
+{
+ struct xhci_dequeue_state deq_state;
+ struct xhci_virt_ep *ep;
+
+ xhci_dbg(xhci, "Cleaning up stalled endpoint ring\n");
+ ep = &xhci->devs[udev->slot_id]->eps[ep_index];
+ /* We need to move the HW's dequeue pointer past this TD,
+ * or it will attempt to resend it on the next doorbell ring.
+ */
+ xhci_find_new_dequeue_state(xhci, udev->slot_id,
+ ep_index, ep->stopped_td,
+ &deq_state);
+
+ /* HW with the reset endpoint quirk will use the saved dequeue state to
+ * issue a configure endpoint command later.
+ */
+ if (!(xhci->quirks & XHCI_RESET_EP_QUIRK)) {
+ xhci_dbg(xhci, "Queueing new dequeue state\n");
+ xhci_queue_new_dequeue_state(xhci, udev->slot_id,
+ ep_index, &deq_state);
+ } else {
+ /* Better hope no one uses the input context between now and the
+ * reset endpoint completion!
+ */
+ xhci_dbg(xhci, "Setting up input context for "
+ "configure endpoint command\n");
+ xhci_setup_input_ctx_for_quirk(xhci, udev->slot_id,
+ ep_index, &deq_state);
+ }
+}
+
+/* Deal with stalled endpoints. The core should have sent the control message
+ * to clear the halt condition. However, we need to make the xHCI hardware
+ * reset its sequence number, since a device will expect a sequence number of
+ * zero after the halt condition is cleared.
+ * Context: in_interrupt
+ */
+void xhci_endpoint_reset(struct usb_hcd *hcd,
+ struct usb_host_endpoint *ep)
+{
+ struct xhci_hcd *xhci;
+ struct usb_device *udev;
+ unsigned int ep_index;
+ unsigned long flags;
+ int ret;
+ struct xhci_virt_ep *virt_ep;
+
+ xhci = hcd_to_xhci(hcd);
+ udev = (struct usb_device *) ep->hcpriv;
+ /* Called with a root hub endpoint (or an endpoint that wasn't added
+ * with xhci_add_endpoint()
+ */
+ if (!ep->hcpriv)
+ return;
+ ep_index = xhci_get_endpoint_index(&ep->desc);
+ virt_ep = &xhci->devs[udev->slot_id]->eps[ep_index];
+ if (!virt_ep->stopped_td) {
+ xhci_dbg(xhci, "Endpoint 0x%x not halted, refusing to reset.\n",
+ ep->desc.bEndpointAddress);
+ return;
+ }
+ if (usb_endpoint_xfer_control(&ep->desc)) {
+ xhci_dbg(xhci, "Control endpoint stall already handled.\n");
+ return;
+ }
+
+ xhci_dbg(xhci, "Queueing reset endpoint command\n");
+ spin_lock_irqsave(&xhci->lock, flags);
+ ret = xhci_queue_reset_ep(xhci, udev->slot_id, ep_index);
+ /*
+ * Can't change the ring dequeue pointer until it's transitioned to the
+ * stopped state, which is only upon a successful reset endpoint
+ * command. Better hope that last command worked!
+ */
+ if (!ret) {
+ xhci_cleanup_stalled_ring(xhci, udev, ep_index);
+ kfree(virt_ep->stopped_td);
+ xhci_ring_cmd_db(xhci);
+ }
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ if (ret)
+ xhci_warn(xhci, "FIXME allocate a new ring segment\n");
+}
+
+/*
+ * This submits a Reset Device Command, which will set the device state to 0,
+ * set the device address to 0, and disable all the endpoints except the default
+ * control endpoint. The USB core should come back and call
+ * xhci_address_device(), and then re-set up the configuration. If this is
+ * called because of a usb_reset_and_verify_device(), then the old alternate
+ * settings will be re-installed through the normal bandwidth allocation
+ * functions.
+ *
+ * Wait for the Reset Device command to finish. Remove all structures
+ * associated with the endpoints that were disabled. Clear the input device
+ * structure? Cache the rings? Reset the control endpoint 0 max packet size?
+ */
+int xhci_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+ int ret, i;
+ unsigned long flags;
+ struct xhci_hcd *xhci;
+ unsigned int slot_id;
+ struct xhci_virt_device *virt_dev;
+ struct xhci_command *reset_device_cmd;
+ int timeleft;
+ int last_freed_endpoint;
+
+ ret = xhci_check_args(hcd, udev, NULL, 0, __func__);
+ if (ret <= 0)
+ return ret;
+ xhci = hcd_to_xhci(hcd);
+ slot_id = udev->slot_id;
+ virt_dev = xhci->devs[slot_id];
+ if (!virt_dev) {
+ xhci_dbg(xhci, "%s called with invalid slot ID %u\n",
+ __func__, slot_id);
+ return -EINVAL;
+ }
+
+ xhci_dbg(xhci, "Resetting device with slot ID %u\n", slot_id);
+ /* Allocate the command structure that holds the struct completion.
+ * Assume we're in process context, since the normal device reset
+ * process has to wait for the device anyway. Storage devices are
+ * reset as part of error handling, so use GFP_NOIO instead of
+ * GFP_KERNEL.
+ */
+ reset_device_cmd = xhci_alloc_command(xhci, false, true, GFP_NOIO);
+ if (!reset_device_cmd) {
+ xhci_dbg(xhci, "Couldn't allocate command structure.\n");
+ return -ENOMEM;
+ }
+
+ /* Attempt to submit the Reset Device command to the command ring */
+ spin_lock_irqsave(&xhci->lock, flags);
+ reset_device_cmd->command_trb = xhci->cmd_ring->enqueue;
+ list_add_tail(&reset_device_cmd->cmd_list, &virt_dev->cmd_list);
+ ret = xhci_queue_reset_device(xhci, slot_id);
+ if (ret) {
+ xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
+ list_del(&reset_device_cmd->cmd_list);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ goto command_cleanup;
+ }
+ xhci_ring_cmd_db(xhci);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ /* Wait for the Reset Device command to finish */
+ timeleft = wait_for_completion_interruptible_timeout(
+ reset_device_cmd->completion,
+ USB_CTRL_SET_TIMEOUT);
+ if (timeleft <= 0) {
+ xhci_warn(xhci, "%s while waiting for reset device command\n",
+ timeleft == 0 ? "Timeout" : "Signal");
+ spin_lock_irqsave(&xhci->lock, flags);
+ /* The timeout might have raced with the event ring handler, so
+ * only delete from the list if the item isn't poisoned.
+ */
+ if (reset_device_cmd->cmd_list.next != LIST_POISON1)
+ list_del(&reset_device_cmd->cmd_list);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ ret = -ETIME;
+ goto command_cleanup;
+ }
+
+ /* The Reset Device command can't fail, according to the 0.95/0.96 spec,
+ * unless we tried to reset a slot ID that wasn't enabled,
+ * or the device wasn't in the addressed or configured state.
+ */
+ ret = reset_device_cmd->status;
+ switch (ret) {
+ case COMP_EBADSLT: /* 0.95 completion code for bad slot ID */
+ case COMP_CTX_STATE: /* 0.96 completion code for same thing */
+ xhci_info(xhci, "Can't reset device (slot ID %u) in %s state\n",
+ slot_id,
+ xhci_get_slot_state(xhci, virt_dev->out_ctx));
+ xhci_info(xhci, "Not freeing device rings.\n");
+ /* Don't treat this as an error. May change my mind later. */
+ ret = 0;
+ goto command_cleanup;
+ case COMP_SUCCESS:
+ xhci_dbg(xhci, "Successful reset device command.\n");
+ break;
+ default:
+ if (xhci_is_vendor_info_code(xhci, ret))
+ break;
+ xhci_warn(xhci, "Unknown completion code %u for "
+ "reset device command.\n", ret);
+ ret = -EINVAL;
+ goto command_cleanup;
+ }
+
+ /* Everything but endpoint 0 is disabled, so free or cache the rings. */
+ last_freed_endpoint = 1;
+ for (i = 1; i < 31; ++i) {
+ if (!virt_dev->eps[i].ring)
+ continue;
+ xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i);
+ last_freed_endpoint = i;
+ }
+ xhci_dbg(xhci, "Output context after successful reset device cmd:\n");
+ xhci_dbg_ctx(xhci, virt_dev->out_ctx, last_freed_endpoint);
+ ret = 0;
+
+command_cleanup:
+ xhci_free_command(xhci, reset_device_cmd);
+ return ret;
+}
+
+/*
+ * At this point, the struct usb_device is about to go away, the device has
+ * disconnected, and all traffic has been stopped and the endpoints have been
+ * disabled. Free any HC data structures associated with that device.
+ */
+void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ struct xhci_virt_device *virt_dev;
+ unsigned long flags;
+ u32 state;
+ int i;
+
+ if (udev->slot_id == 0)
+ return;
+ virt_dev = xhci->devs[udev->slot_id];
+ if (!virt_dev)
+ return;
+
+ /* Stop any wayward timer functions (which may grab the lock) */
+ for (i = 0; i < 31; ++i) {
+ virt_dev->eps[i].ep_state &= ~EP_HALT_PENDING;
+ del_timer_sync(&virt_dev->eps[i].stop_cmd_timer);
+ }
+
+ spin_lock_irqsave(&xhci->lock, flags);
+ /* Don't disable the slot if the host controller is dead. */
+ state = xhci_readl(xhci, &xhci->op_regs->status);
+ if (state == 0xffffffff || (xhci->xhc_state & XHCI_STATE_DYING)) {
+ xhci_free_virt_device(xhci, udev->slot_id);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return;
+ }
+
+ if (xhci_queue_slot_control(xhci, TRB_DISABLE_SLOT, udev->slot_id)) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
+ return;
+ }
+ xhci_ring_cmd_db(xhci);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ /*
+ * Event command completion handler will free any data structures
+ * associated with the slot. XXX Can free sleep?
+ */
+}
+
+/*
+ * Returns 0 if the xHC ran out of device slots, the Enable Slot command
+ * timed out, or allocating memory failed. Returns 1 on success.
+ */
+int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ unsigned long flags;
+ int timeleft;
+ int ret;
+
+ spin_lock_irqsave(&xhci->lock, flags);
+ ret = xhci_queue_slot_control(xhci, TRB_ENABLE_SLOT, 0);
+ if (ret) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
+ return 0;
+ }
+ xhci_ring_cmd_db(xhci);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ /* XXX: how much time for xHC slot assignment? */
+ timeleft = wait_for_completion_interruptible_timeout(&xhci->addr_dev,
+ USB_CTRL_SET_TIMEOUT);
+ if (timeleft <= 0) {
+ xhci_warn(xhci, "%s while waiting for a slot\n",
+ timeleft == 0 ? "Timeout" : "Signal");
+ /* FIXME cancel the enable slot request */
+ return 0;
+ }
+
+ if (!xhci->slot_id) {
+ xhci_err(xhci, "Error while assigning device slot ID\n");
+ return 0;
+ }
+ /* xhci_alloc_virt_device() does not touch rings; no need to lock */
+ if (!xhci_alloc_virt_device(xhci, xhci->slot_id, udev, GFP_KERNEL)) {
+ /* Disable slot, if we can do it without mem alloc */
+ xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n");
+ spin_lock_irqsave(&xhci->lock, flags);
+ if (!xhci_queue_slot_control(xhci, TRB_DISABLE_SLOT, udev->slot_id))
+ xhci_ring_cmd_db(xhci);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return 0;
+ }
+ udev->slot_id = xhci->slot_id;
+ /* Is this a LS or FS device under a HS hub? */
+ /* Hub or peripherial? */
+ return 1;
+}
+
+/*
+ * Issue an Address Device command (which will issue a SetAddress request to
+ * the device).
+ * We should be protected by the usb_address0_mutex in khubd's hub_port_init, so
+ * we should only issue and wait on one address command at the same time.
+ *
+ * We add one to the device address issued by the hardware because the USB core
+ * uses address 1 for the root hubs (even though they're not really devices).
+ */
+int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+ unsigned long flags;
+ int timeleft;
+ struct xhci_virt_device *virt_dev;
+ int ret = 0;
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ struct xhci_slot_ctx *slot_ctx;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ u64 temp_64;
+
+ if (!udev->slot_id) {
+ xhci_dbg(xhci, "Bad Slot ID %d\n", udev->slot_id);
+ return -EINVAL;
+ }
+
+ virt_dev = xhci->devs[udev->slot_id];
+
+ /* If this is a Set Address to an unconfigured device, setup ep 0 */
+ if (!udev->config)
+ xhci_setup_addressable_virt_dev(xhci, udev);
+ /* Otherwise, assume the core has the device configured how it wants */
+ xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id);
+ xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2);
+
+ spin_lock_irqsave(&xhci->lock, flags);
+ ret = xhci_queue_address_device(xhci, virt_dev->in_ctx->dma,
+ udev->slot_id);
+ if (ret) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
+ return ret;
+ }
+ xhci_ring_cmd_db(xhci);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ /* ctrl tx can take up to 5 sec; XXX: need more time for xHC? */
+ timeleft = wait_for_completion_interruptible_timeout(&xhci->addr_dev,
+ USB_CTRL_SET_TIMEOUT);
+ /* FIXME: From section 4.3.4: "Software shall be responsible for timing
+ * the SetAddress() "recovery interval" required by USB and aborting the
+ * command on a timeout.
+ */
+ if (timeleft <= 0) {
+ xhci_warn(xhci, "%s while waiting for a slot\n",
+ timeleft == 0 ? "Timeout" : "Signal");
+ /* FIXME cancel the address device command */
+ return -ETIME;
+ }
+
+ switch (virt_dev->cmd_status) {
+ case COMP_CTX_STATE:
+ case COMP_EBADSLT:
+ xhci_err(xhci, "Setup ERROR: address device command for slot %d.\n",
+ udev->slot_id);
+ ret = -EINVAL;
+ break;
+ case COMP_TX_ERR:
+ dev_warn(&udev->dev, "Device not responding to set address.\n");
+ ret = -EPROTO;
+ break;
+ case COMP_SUCCESS:
+ xhci_dbg(xhci, "Successful Address Device command\n");
+ break;
+ default:
+ xhci_err(xhci, "ERROR: unexpected command completion "
+ "code 0x%x.\n", virt_dev->cmd_status);
+ xhci_dbg(xhci, "Slot ID %d Output Context:\n", udev->slot_id);
+ xhci_dbg_ctx(xhci, virt_dev->out_ctx, 2);
+ ret = -EINVAL;
+ break;
+ }
+ if (ret) {
+ return ret;
+ }
+ temp_64 = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
+ xhci_dbg(xhci, "Op regs DCBAA ptr = %#016llx\n", temp_64);
+ xhci_dbg(xhci, "Slot ID %d dcbaa entry @%p = %#016llx\n",
+ udev->slot_id,
+ &xhci->dcbaa->dev_context_ptrs[udev->slot_id],
+ (unsigned long long)
+ xhci->dcbaa->dev_context_ptrs[udev->slot_id]);
+ xhci_dbg(xhci, "Output Context DMA address = %#08llx\n",
+ (unsigned long long)virt_dev->out_ctx->dma);
+ xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id);
+ xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2);
+ xhci_dbg(xhci, "Slot ID %d Output Context:\n", udev->slot_id);
+ xhci_dbg_ctx(xhci, virt_dev->out_ctx, 2);
+ /*
+ * USB core uses address 1 for the roothubs, so we add one to the
+ * address given back to us by the HC.
+ */
+ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
+ udev->devnum = (slot_ctx->dev_state & DEV_ADDR_MASK) + 1;
+ /* Zero the input context control for later use */
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
+ ctrl_ctx->add_flags = 0;
+ ctrl_ctx->drop_flags = 0;
+
+ xhci_dbg(xhci, "Device address = %d\n", udev->devnum);
+ /* XXX Meh, not sure if anyone else but choose_address uses this. */
+ set_bit(udev->devnum, udev->bus->devmap.devicemap);
+
+ return 0;
+}
+
+/* Once a hub descriptor is fetched for a device, we need to update the xHC's
+ * internal data structures for the device.
+ */
+int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
+ struct usb_tt *tt, gfp_t mem_flags)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ struct xhci_virt_device *vdev;
+ struct xhci_command *config_cmd;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ struct xhci_slot_ctx *slot_ctx;
+ unsigned long flags;
+ unsigned think_time;
+ int ret;
+
+ /* Ignore root hubs */
+ if (!hdev->parent)
+ return 0;
+
+ vdev = xhci->devs[hdev->slot_id];
+ if (!vdev) {
+ xhci_warn(xhci, "Cannot update hub desc for unknown device.\n");
+ return -EINVAL;
+ }
+ config_cmd = xhci_alloc_command(xhci, true, true, mem_flags);
+ if (!config_cmd) {
+ xhci_dbg(xhci, "Could not allocate xHCI command structure.\n");
+ return -ENOMEM;
+ }
+
+ spin_lock_irqsave(&xhci->lock, flags);
+ xhci_slot_copy(xhci, config_cmd->in_ctx, vdev->out_ctx);
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, config_cmd->in_ctx);
+ ctrl_ctx->add_flags |= SLOT_FLAG;
+ slot_ctx = xhci_get_slot_ctx(xhci, config_cmd->in_ctx);
+ slot_ctx->dev_info |= DEV_HUB;
+ if (tt->multi)
+ slot_ctx->dev_info |= DEV_MTT;
+ if (xhci->hci_version > 0x95) {
+ xhci_dbg(xhci, "xHCI version %x needs hub "
+ "TT think time and number of ports\n",
+ (unsigned int) xhci->hci_version);
+ slot_ctx->dev_info2 |= XHCI_MAX_PORTS(hdev->maxchild);
+ /* Set TT think time - convert from ns to FS bit times.
+ * 0 = 8 FS bit times, 1 = 16 FS bit times,
+ * 2 = 24 FS bit times, 3 = 32 FS bit times.
+ */
+ think_time = tt->think_time;
+ if (think_time != 0)
+ think_time = (think_time / 666) - 1;
+ slot_ctx->tt_info |= TT_THINK_TIME(think_time);
+ } else {
+ xhci_dbg(xhci, "xHCI version %x doesn't need hub "
+ "TT think time or number of ports\n",
+ (unsigned int) xhci->hci_version);
+ }
+ slot_ctx->dev_state = 0;
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ xhci_dbg(xhci, "Set up %s for hub device.\n",
+ (xhci->hci_version > 0x95) ?
+ "configure endpoint" : "evaluate context");
+ xhci_dbg(xhci, "Slot %u Input Context:\n", hdev->slot_id);
+ xhci_dbg_ctx(xhci, config_cmd->in_ctx, 0);
+
+ /* Issue and wait for the configure endpoint or
+ * evaluate context command.
+ */
+ if (xhci->hci_version > 0x95)
+ ret = xhci_configure_endpoint(xhci, hdev, config_cmd,
+ false, false);
+ else
+ ret = xhci_configure_endpoint(xhci, hdev, config_cmd,
+ true, false);
+
+ xhci_dbg(xhci, "Slot %u Output Context:\n", hdev->slot_id);
+ xhci_dbg_ctx(xhci, vdev->out_ctx, 0);
+
+ xhci_free_command(xhci, config_cmd);
+ return ret;
+}
+
+int xhci_get_frame(struct usb_hcd *hcd)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ /* EHCI mods by the periodic size. Why? */
+ return xhci_readl(xhci, &xhci->run_regs->microframe_index) >> 3;
+}
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_LICENSE("GPL");
+
+static int __init xhci_hcd_init(void)
+{
+#ifdef CONFIG_PCI
+ int retval = 0;
+
+ retval = xhci_register_pci();
+
+ if (retval < 0) {
+ printk(KERN_DEBUG "Problem registering PCI driver.");
+ return retval;
+ }
+#endif
+ /*
+ * Check the compiler generated sizes of structures that must be laid
+ * out in specific ways for hardware access.
+ */
+ BUILD_BUG_ON(sizeof(struct xhci_doorbell_array) != 256*32/8);
+ BUILD_BUG_ON(sizeof(struct xhci_slot_ctx) != 8*32/8);
+ BUILD_BUG_ON(sizeof(struct xhci_ep_ctx) != 8*32/8);
+ /* xhci_device_control has eight fields, and also
+ * embeds one xhci_slot_ctx and 31 xhci_ep_ctx
+ */
+ BUILD_BUG_ON(sizeof(struct xhci_stream_ctx) != 4*32/8);
+ BUILD_BUG_ON(sizeof(union xhci_trb) != 4*32/8);
+ BUILD_BUG_ON(sizeof(struct xhci_erst_entry) != 4*32/8);
+ BUILD_BUG_ON(sizeof(struct xhci_cap_regs) != 7*32/8);
+ BUILD_BUG_ON(sizeof(struct xhci_intr_reg) != 8*32/8);
+ /* xhci_run_regs has eight fields and embeds 128 xhci_intr_regs */
+ BUILD_BUG_ON(sizeof(struct xhci_run_regs) != (8+8*128)*32/8);
+ BUILD_BUG_ON(sizeof(struct xhci_doorbell_array) != 256*32/8);
+ return 0;
+}
+module_init(xhci_hcd_init);
+
+static void __exit xhci_hcd_cleanup(void)
+{
+#ifdef CONFIG_PCI
+ xhci_unregister_pci();
+#endif
+}
+module_exit(xhci_hcd_cleanup);