summaryrefslogtreecommitdiffstats
path: root/drivers/usb/musb/davinci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/musb/davinci.c')
-rw-r--r--drivers/usb/musb/davinci.c174
1 files changed, 154 insertions, 20 deletions
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 6e67629f50c..e6de097fb7e 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -30,6 +30,8 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
#include <mach/hardware.h>
#include <mach/memory.h>
@@ -51,6 +53,12 @@
#define USB_PHY_CTRL IO_ADDRESS(USBPHY_CTL_PADDR)
#define DM355_DEEPSLEEP IO_ADDRESS(DM355_DEEPSLEEP_PADDR)
+struct davinci_glue {
+ struct device *dev;
+ struct platform_device *musb;
+ struct clk *clk;
+};
+
/* REVISIT (PM) we should be able to keep the PHY in low power mode most
* of the time (24 MHZ oscillator and PLL off, etc) by setting POWER.D0
* and, when in host mode, autosuspending idle root ports... PHYPLLON
@@ -83,7 +91,7 @@ static inline void phy_off(void)
static int dma_off = 1;
-void musb_platform_enable(struct musb *musb)
+static void davinci_musb_enable(struct musb *musb)
{
u32 tmp, old, val;
@@ -116,7 +124,7 @@ void musb_platform_enable(struct musb *musb)
/*
* Disable the HDRC and flush interrupts
*/
-void musb_platform_disable(struct musb *musb)
+static void davinci_musb_disable(struct musb *musb)
{
/* because we don't set CTRLR.UINT, "important" to:
* - not read/write INTRUSB/INTRUSBE
@@ -167,7 +175,7 @@ static void evm_deferred_drvvbus(struct work_struct *ignored)
#endif /* EVM */
-static void davinci_source_power(struct musb *musb, int is_on, int immediate)
+static void davinci_musb_source_power(struct musb *musb, int is_on, int immediate)
{
#ifdef CONFIG_MACH_DAVINCI_EVM
if (is_on)
@@ -190,10 +198,10 @@ static void davinci_source_power(struct musb *musb, int is_on, int immediate)
#endif
}
-static void davinci_set_vbus(struct musb *musb, int is_on)
+static void davinci_musb_set_vbus(struct musb *musb, int is_on)
{
WARN_ON(is_on && is_peripheral_active(musb));
- davinci_source_power(musb, is_on, 0);
+ davinci_musb_source_power(musb, is_on, 0);
}
@@ -259,7 +267,7 @@ static void otg_timer(unsigned long _musb)
spin_unlock_irqrestore(&musb->lock, flags);
}
-static irqreturn_t davinci_interrupt(int irq, void *__hci)
+static irqreturn_t davinci_musb_interrupt(int irq, void *__hci)
{
unsigned long flags;
irqreturn_t retval = IRQ_NONE;
@@ -345,7 +353,7 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci)
/* NOTE: this must complete poweron within 100 msec
* (OTG_TIME_A_WAIT_VRISE) but we don't check for that.
*/
- davinci_source_power(musb, drvvbus, 0);
+ davinci_musb_source_power(musb, drvvbus, 0);
DBG(2, "VBUS %s (%s)%s, devctl %02x\n",
drvvbus ? "on" : "off",
otg_state_string(musb),
@@ -370,13 +378,13 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci)
return retval;
}
-int musb_platform_set_mode(struct musb *musb, u8 mode)
+static int davinci_musb_set_mode(struct musb *musb, u8 mode)
{
/* EVM can't do this (right?) */
return -EIO;
}
-int __init musb_platform_init(struct musb *musb, void *board_data)
+static int davinci_musb_init(struct musb *musb)
{
void __iomem *tibase = musb->ctrl_base;
u32 revision;
@@ -388,8 +396,6 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
musb->mregs += DAVINCI_BASE_OFFSET;
- clk_enable(musb->clock);
-
/* returns zero if e.g. not clocked */
revision = musb_readl(tibase, DAVINCI_USB_VERSION_REG);
if (revision == 0)
@@ -398,8 +404,7 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
if (is_host_enabled(musb))
setup_timer(&otg_workaround, otg_timer, (unsigned long) musb);
- musb->board_set_vbus = davinci_set_vbus;
- davinci_source_power(musb, 0, 1);
+ davinci_musb_source_power(musb, 0, 1);
/* dm355 EVM swaps D+/D- for signal integrity, and
* is clocked from the main 24 MHz crystal.
@@ -440,18 +445,16 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
revision, __raw_readl(USB_PHY_CTRL),
musb_readb(tibase, DAVINCI_USB_CTRL_REG));
- musb->isr = davinci_interrupt;
+ musb->isr = davinci_musb_interrupt;
return 0;
fail:
- clk_disable(musb->clock);
-
otg_put_transceiver(musb->xceiv);
usb_nop_xceiv_unregister();
return -ENODEV;
}
-int musb_platform_exit(struct musb *musb)
+static int davinci_musb_exit(struct musb *musb)
{
if (is_host_enabled(musb))
del_timer_sync(&otg_workaround);
@@ -465,7 +468,7 @@ int musb_platform_exit(struct musb *musb)
__raw_writel(deepsleep, DM355_DEEPSLEEP);
}
- davinci_source_power(musb, 0 /*off*/, 1);
+ davinci_musb_source_power(musb, 0 /*off*/, 1);
/* delay, to avoid problems with module reload */
if (is_host_enabled(musb) && musb->xceiv->default_a) {
@@ -495,10 +498,141 @@ int musb_platform_exit(struct musb *musb)
phy_off();
- clk_disable(musb->clock);
-
otg_put_transceiver(musb->xceiv);
usb_nop_xceiv_unregister();
return 0;
}
+
+static const struct musb_platform_ops davinci_ops = {
+ .init = davinci_musb_init,
+ .exit = davinci_musb_exit,
+
+ .enable = davinci_musb_enable,
+ .disable = davinci_musb_disable,
+
+ .set_mode = davinci_musb_set_mode,
+
+ .set_vbus = davinci_musb_set_vbus,
+};
+
+static u64 davinci_dmamask = DMA_BIT_MASK(32);
+
+static int __init davinci_probe(struct platform_device *pdev)
+{
+ struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data;
+ struct platform_device *musb;
+ struct davinci_glue *glue;
+ struct clk *clk;
+
+ int ret = -ENOMEM;
+
+ glue = kzalloc(sizeof(*glue), GFP_KERNEL);
+ if (!glue) {
+ dev_err(&pdev->dev, "failed to allocate glue context\n");
+ goto err0;
+ }
+
+ musb = platform_device_alloc("musb-hdrc", -1);
+ if (!musb) {
+ dev_err(&pdev->dev, "failed to allocate musb device\n");
+ goto err1;
+ }
+
+ clk = clk_get(&pdev->dev, "usb");
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "failed to get clock\n");
+ ret = PTR_ERR(clk);
+ goto err2;
+ }
+
+ ret = clk_enable(clk);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable clock\n");
+ goto err3;
+ }
+
+ musb->dev.parent = &pdev->dev;
+ musb->dev.dma_mask = &davinci_dmamask;
+ musb->dev.coherent_dma_mask = davinci_dmamask;
+
+ glue->dev = &pdev->dev;
+ glue->musb = musb;
+ glue->clk = clk;
+
+ pdata->platform_ops = &davinci_ops;
+
+ platform_set_drvdata(pdev, glue);
+
+ ret = platform_device_add_resources(musb, pdev->resource,
+ pdev->num_resources);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add resources\n");
+ goto err4;
+ }
+
+ ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add platform_data\n");
+ goto err4;
+ }
+
+ ret = platform_device_add(musb);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register musb device\n");
+ goto err4;
+ }
+
+ return 0;
+
+err4:
+ clk_disable(clk);
+
+err3:
+ clk_put(clk);
+
+err2:
+ platform_device_put(musb);
+
+err1:
+ kfree(glue);
+
+err0:
+ return ret;
+}
+
+static int __exit davinci_remove(struct platform_device *pdev)
+{
+ struct davinci_glue *glue = platform_get_drvdata(pdev);
+
+ platform_device_del(glue->musb);
+ platform_device_put(glue->musb);
+ clk_disable(glue->clk);
+ clk_put(glue->clk);
+ kfree(glue);
+
+ return 0;
+}
+
+static struct platform_driver davinci_driver = {
+ .remove = __exit_p(davinci_remove),
+ .driver = {
+ .name = "musb-davinci",
+ },
+};
+
+MODULE_DESCRIPTION("DaVinci MUSB Glue Layer");
+MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
+MODULE_LICENSE("GPL v2");
+
+static int __init davinci_init(void)
+{
+ return platform_driver_probe(&davinci_driver, davinci_probe);
+}
+subsys_initcall(davinci_init);
+
+static void __exit davinci_exit(void)
+{
+ platform_driver_unregister(&davinci_driver);
+}
+module_exit(davinci_exit);