summaryrefslogtreecommitdiffstats
path: root/drivers/usb/storage/scsiglue.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/storage/scsiglue.c')
-rw-r--r--drivers/usb/storage/scsiglue.c43
1 files changed, 43 insertions, 0 deletions
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 09779f6a817..2a42b862aa9 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -59,6 +59,13 @@
#include "transport.h"
#include "protocol.h"
+/* Vendor IDs for companies that seem to include the READ CAPACITY bug
+ * in all their devices
+ */
+#define VENDOR_ID_NOKIA 0x0421
+#define VENDOR_ID_NIKON 0x04b0
+#define VENDOR_ID_MOTOROLA 0x22b8
+
/***********************************************************************
* Host functions
***********************************************************************/
@@ -129,11 +136,35 @@ static int slave_configure(struct scsi_device *sdev)
max_sectors);
}
+ /* Some USB host controllers can't do DMA; they have to use PIO.
+ * They indicate this by setting their dma_mask to NULL. For
+ * such controllers we need to make sure the block layer sets
+ * up bounce buffers in addressable memory.
+ */
+ if (!us->pusb_dev->bus->controller->dma_mask)
+ blk_queue_bounce_limit(sdev->request_queue, BLK_BOUNCE_HIGH);
+
/* We can't put these settings in slave_alloc() because that gets
* called before the device type is known. Consequently these
* settings can't be overridden via the scsi devinfo mechanism. */
if (sdev->type == TYPE_DISK) {
+ /* Some vendors seem to put the READ CAPACITY bug into
+ * all their devices -- primarily makers of cell phones
+ * and digital cameras. Since these devices always use
+ * flash media and can be expected to have an even number
+ * of sectors, we will always enable the CAPACITY_HEURISTICS
+ * flag unless told otherwise. */
+ switch (le16_to_cpu(us->pusb_dev->descriptor.idVendor)) {
+ case VENDOR_ID_NOKIA:
+ case VENDOR_ID_NIKON:
+ case VENDOR_ID_MOTOROLA:
+ if (!(us->fflags & (US_FL_FIX_CAPACITY |
+ US_FL_CAPACITY_OK)))
+ us->fflags |= US_FL_CAPACITY_HEURISTICS;
+ break;
+ }
+
/* Disk-type devices use MODE SENSE(6) if the protocol
* (SubClass) is Transparent SCSI, otherwise they use
* MODE SENSE(10). */
@@ -170,6 +201,10 @@ static int slave_configure(struct scsi_device *sdev)
if (us->fflags & US_FL_CAPACITY_HEURISTICS)
sdev->guess_capacity = 1;
+ /* assume SPC3 or latter devices support sense size > 18 */
+ if (sdev->scsi_level > SCSI_SPC_2)
+ us->fflags |= US_FL_SANE_SENSE;
+
/* Some devices report a SCSI revision level above 2 but are
* unable to handle the REPORT LUNS command (for which
* support is mandatory at level 3). Since we already have
@@ -196,6 +231,14 @@ static int slave_configure(struct scsi_device *sdev)
* sector in a larger then 1 sector read, since the performance
* impact is negible we set this flag for all USB disks */
sdev->last_sector_bug = 1;
+
+ /* Enable last-sector hacks for single-target devices using
+ * the Bulk-only transport, unless we already know the
+ * capacity will be decremented or is correct. */
+ if (!(us->fflags & (US_FL_FIX_CAPACITY | US_FL_CAPACITY_OK |
+ US_FL_SCM_MULT_TARG)) &&
+ us->protocol == US_PR_BULK)
+ us->use_last_sector_hacks = 1;
} else {
/* Non-disk-type devices don't need to blacklist any pages