diff options
Diffstat (limited to 'drivers/video')
34 files changed, 2345 insertions, 577 deletions
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 6372f8b17b4..fb19803060c 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -41,7 +41,7 @@ menuconfig FB You need an utility program called fbset to make full use of frame buffer devices. Please read <file:Documentation/fb/framebuffer.txt> and the Framebuffer-HOWTO at - <http://www.tahallah.demon.co.uk/programming/prog.html> for more + <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.2.html> for more information. Say Y here and to the driver for your graphics board below if you @@ -1054,9 +1054,7 @@ config FB_RIVA_BACKLIGHT config FB_I810 tristate "Intel 810/815 support (EXPERIMENTAL)" - depends on FB && EXPERIMENTAL && PCI && X86_32 - select AGP - select AGP_INTEL + depends on EXPERIMENTAL && FB && PCI && X86_32 && AGP_INTEL select FB_MODE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA @@ -1119,9 +1117,7 @@ config FB_CARILLO_RANCH config FB_INTEL tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support (EXPERIMENTAL)" - depends on FB && EXPERIMENTAL && PCI && X86 - select AGP - select AGP_INTEL + depends on EXPERIMENTAL && FB && PCI && X86 && AGP_INTEL select FB_MODE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA @@ -2123,6 +2119,18 @@ config FB_PRE_INIT_FB Select this option if display contents should be inherited as set by the bootloader. +config FB_MX3 + tristate "MX3 Framebuffer support" + depends on FB && MX3_IPU + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + default y + help + This is a framebuffer device for the i.MX31 LCD Controller. So + far only synchronous displays are supported. If you plan to use + an LCD display with your i.MX31 system, say Y here. + source "drivers/video/omap/Kconfig" source "drivers/video/backlight/Kconfig" diff --git a/drivers/video/Makefile b/drivers/video/Makefile index e39e33e797d..2a998ca6181 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -28,7 +28,7 @@ obj-$(CONFIG_FB_DDC) += fb_ddc.o obj-$(CONFIG_FB_DEFERRED_IO) += fb_defio.o # Hardware specific drivers go first -obj-$(CONFIG_FB_AMIGA) += amifb.o c2p.o +obj-$(CONFIG_FB_AMIGA) += amifb.o c2p_planar.o obj-$(CONFIG_FB_ARC) += arcfb.o obj-$(CONFIG_FB_CLPS711X) += clps711xfb.o obj-$(CONFIG_FB_CYBER2000) += cyber2000fb.o @@ -72,7 +72,7 @@ obj-$(CONFIG_FB_TCX) += tcx.o sbuslib.o obj-$(CONFIG_FB_LEO) += leo.o sbuslib.o obj-$(CONFIG_FB_SGIVW) += sgivwfb.o obj-$(CONFIG_FB_ACORN) += acornfb.o -obj-$(CONFIG_FB_ATARI) += atafb.o c2p.o atafb_mfb.o \ +obj-$(CONFIG_FB_ATARI) += atafb.o c2p_iplan2.o atafb_mfb.o \ atafb_iplan2p2.o atafb_iplan2p4.o atafb_iplan2p8.o obj-$(CONFIG_FB_MAC) += macfb.o obj-$(CONFIG_FB_HECUBA) += hecubafb.o @@ -132,6 +132,7 @@ obj-$(CONFIG_FB_VGA16) += vga16fb.o obj-$(CONFIG_FB_OF) += offb.o obj-$(CONFIG_FB_BF54X_LQ043) += bf54x-lq043fb.o obj-$(CONFIG_FB_BFIN_T350MCQB) += bfin-t350mcqb-fb.o +obj-$(CONFIG_FB_MX3) += mx3fb.o # the test framebuffer is last obj-$(CONFIG_FB_VIRTUAL) += vfb.o diff --git a/drivers/video/amifb.c b/drivers/video/amifb.c index b8e9a8682f2..100f2366146 100644 --- a/drivers/video/amifb.c +++ b/drivers/video/amifb.c @@ -2159,9 +2159,9 @@ static void amifb_imageblit(struct fb_info *info, const struct fb_image *image) src += pitch; } } else { - c2p(info->screen_base, image->data, dx, dy, width, height, - par->next_line, par->next_plane, image->width, - info->var.bits_per_pixel); + c2p_planar(info->screen_base, image->data, dx, dy, width, + height, par->next_line, par->next_plane, + image->width, info->var.bits_per_pixel); } } diff --git a/drivers/video/atafb.c b/drivers/video/atafb.c index 77eb8b34fbf..018850c116c 100644 --- a/drivers/video/atafb.c +++ b/drivers/video/atafb.c @@ -122,7 +122,6 @@ static struct atafb_par { void *screen_base; int yres_virtual; u_long next_line; - u_long next_plane; #if defined ATAFB_TT || defined ATAFB_STE union { struct { @@ -149,6 +148,7 @@ static struct atafb_par { short mono; short ste_mode; short bpp; + u32 pseudo_palette[16]; } falcon; #endif /* Nothing needed for external mode */ @@ -614,7 +614,7 @@ static int tt_encode_fix(struct fb_fix_screeninfo *fix, struct atafb_par *par) fix->xpanstep = 0; fix->ypanstep = 1; fix->ywrapstep = 0; - fix->line_length = 0; + fix->line_length = par->next_line; fix->accel = FB_ACCEL_ATARIBLITT; return 0; } @@ -691,6 +691,7 @@ static int tt_decode_var(struct fb_var_screeninfo *var, struct atafb_par *par) return -EINVAL; par->yres_virtual = yres_virtual; par->screen_base = screen_base + var->yoffset * linelen; + par->next_line = linelen; return 0; } @@ -840,7 +841,7 @@ static int tt_detect(void) tt_dmasnd.ctrl = DMASND_CTRL_OFF; udelay(20); /* wait a while for things to settle down */ } - mono_moni = (mfp.par_dt_reg & 0x80) == 0; + mono_moni = (st_mfp.par_dt_reg & 0x80) == 0; tt_get_par(&par); tt_encode_var(&atafb_predefined[0], &par); @@ -884,10 +885,6 @@ static int vdl_prescale[4][3] = { /* Default hsync timing [mon_type] in picoseconds */ static long h_syncs[4] = { 3000000, 4875000, 4000000, 4875000 }; -#ifdef FBCON_HAS_CFB16 -static u16 fbcon_cfb16_cmap[16]; -#endif - static inline int hxx_prescale(struct falcon_hw *hw) { return hw->ste_mode ? 16 @@ -918,7 +915,7 @@ static int falcon_encode_fix(struct fb_fix_screeninfo *fix, fix->visual = FB_VISUAL_TRUECOLOR; fix->xpanstep = 2; } - fix->line_length = 0; + fix->line_length = par->next_line; fix->accel = FB_ACCEL_ATARIBLITT; return 0; } @@ -1394,14 +1391,7 @@ set_screen_base: par->screen_base = screen_base + var->yoffset * linelen; par->hw.falcon.xoffset = 0; - // FIXME!!! sort of works, no crash - //par->next_line = linelen; - //par->next_plane = yres_virtual * linelen; par->next_line = linelen; - par->next_plane = 2; - // crashes - //par->next_plane = linelen; - //par->next_line = yres_virtual * linelen; return 0; } @@ -1735,10 +1725,10 @@ static int falcon_setcolreg(unsigned int regno, unsigned int red, (((red & 0xe000) >> 13) | ((red & 0x1000) >> 12) << 8) | (((green & 0xe000) >> 13) | ((green & 0x1000) >> 12) << 4) | ((blue & 0xe000) >> 13) | ((blue & 0x1000) >> 12); -#ifdef FBCON_HAS_CFB16 - fbcon_cfb16_cmap[regno] = ((red & 0xf800) | - ((green & 0xfc00) >> 5) | - ((blue & 0xf800) >> 11)); +#ifdef ATAFB_FALCON + ((u32 *)info->pseudo_palette)[regno] = ((red & 0xf800) | + ((green & 0xfc00) >> 5) | + ((blue & 0xf800) >> 11)); #endif } return 0; @@ -1852,7 +1842,7 @@ static int stste_encode_fix(struct fb_fix_screeninfo *fix, fix->ypanstep = 0; } fix->ywrapstep = 0; - fix->line_length = 0; + fix->line_length = par->next_line; fix->accel = FB_ACCEL_ATARIBLITT; return 0; } @@ -1910,6 +1900,7 @@ static int stste_decode_var(struct fb_var_screeninfo *var, return -EINVAL; par->yres_virtual = yres_virtual; par->screen_base = screen_base + var->yoffset * linelen; + par->next_line = linelen; return 0; } @@ -2044,7 +2035,7 @@ static int stste_detect(void) tt_dmasnd.ctrl = DMASND_CTRL_OFF; udelay(20); /* wait a while for things to settle down */ } - mono_moni = (mfp.par_dt_reg & 0x80) == 0; + mono_moni = (st_mfp.par_dt_reg & 0x80) == 0; stste_get_par(&par); stste_encode_var(&atafb_predefined[0], &par); @@ -2095,20 +2086,20 @@ static void st_ovsc_switch(void) return; local_irq_save(flags); - mfp.tim_ct_b = 0x10; - mfp.active_edge |= 8; - mfp.tim_ct_b = 0; - mfp.tim_dt_b = 0xf0; - mfp.tim_ct_b = 8; - while (mfp.tim_dt_b > 1) /* TOS does it this way, don't ask why */ + st_mfp.tim_ct_b = 0x10; + st_mfp.active_edge |= 8; + st_mfp.tim_ct_b = 0; + st_mfp.tim_dt_b = 0xf0; + st_mfp.tim_ct_b = 8; + while (st_mfp.tim_dt_b > 1) /* TOS does it this way, don't ask why */ ; - new = mfp.tim_dt_b; + new = st_mfp.tim_dt_b; do { udelay(LINE_DELAY); old = new; - new = mfp.tim_dt_b; + new = st_mfp.tim_dt_b; } while (old != new); - mfp.tim_ct_b = 0x10; + st_mfp.tim_ct_b = 0x10; udelay(SYNC_DELAY); if (atari_switches & ATARI_SWITCH_OVSC_IKBD) @@ -2169,7 +2160,7 @@ static int ext_encode_fix(struct fb_fix_screeninfo *fix, struct atafb_par *par) fix->xpanstep = 0; fix->ypanstep = 0; fix->ywrapstep = 0; - fix->line_length = 0; + fix->line_length = par->next_line; return 0; } @@ -2184,6 +2175,8 @@ static int ext_decode_var(struct fb_var_screeninfo *var, struct atafb_par *par) var->xoffset > 0 || var->yoffset > 0) return -EINVAL; + + par->next_line = external_xres_virtual * external_depth / 8; return 0; } @@ -2443,42 +2436,6 @@ static void atafb_set_disp(struct fb_info *info) atafb_get_fix(&info->fix, info); info->screen_base = (void *)info->fix.smem_start; - - switch (info->fix.type) { - case FB_TYPE_INTERLEAVED_PLANES: - switch (info->var.bits_per_pixel) { - case 2: - // display->dispsw = &fbcon_iplan2p2; - break; - case 4: - // display->dispsw = &fbcon_iplan2p4; - break; - case 8: - // display->dispsw = &fbcon_iplan2p8; - break; - } - break; - case FB_TYPE_PACKED_PIXELS: - switch (info->var.bits_per_pixel) { -#ifdef FBCON_HAS_MFB - case 1: - // display->dispsw = &fbcon_mfb; - break; -#endif -#ifdef FBCON_HAS_CFB8 - case 8: - // display->dispsw = &fbcon_cfb8; - break; -#endif -#ifdef FBCON_HAS_CFB16 - case 16: - // display->dispsw = &fbcon_cfb16; - // display->dispsw_data = fbcon_cfb16_cmap; - break; -#endif - } - break; - } } static int atafb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, @@ -2549,6 +2506,13 @@ static void atafb_fillrect(struct fb_info *info, const struct fb_fillrect *rect) if (!rect->width || !rect->height) return; +#ifdef ATAFB_FALCON + if (info->var.bits_per_pixel == 16) { + cfb_fillrect(info, rect); + return; + } +#endif + /* * We could use hardware clipping but on many cards you get around * hardware clipping by writing to framebuffer directly. @@ -2583,6 +2547,13 @@ static void atafb_copyarea(struct fb_info *info, const struct fb_copyarea *area) u32 dx, dy, sx, sy, width, height; int rev_copy = 0; +#ifdef ATAFB_FALCON + if (info->var.bits_per_pixel == 16) { + cfb_copyarea(info, area); + return; + } +#endif + /* clip the destination */ x2 = area->dx + area->width; y2 = area->dy + area->height; @@ -2632,6 +2603,13 @@ static void atafb_imageblit(struct fb_info *info, const struct fb_image *image) const char *src; u32 dx, dy, width, height, pitch; +#ifdef ATAFB_FALCON + if (info->var.bits_per_pixel == 16) { + cfb_imageblit(info, image); + return; + } +#endif + /* * We could use hardware clipping but on many cards you get around * hardware clipping by writing to framebuffer directly like we are @@ -2676,10 +2654,9 @@ static void atafb_imageblit(struct fb_info *info, const struct fb_image *image) src += pitch; } } else { - // only used for logo; broken - c2p(info->screen_base, image->data, dx, dy, width, height, - par->next_line, par->next_plane, image->width, - info->var.bits_per_pixel); + c2p_iplan2(info->screen_base, image->data, dx, dy, width, + height, par->next_line, image->width, + info->var.bits_per_pixel); } } @@ -3098,8 +3075,7 @@ int __init atafb_setup(char *options) int __init atafb_init(void) { - int pad; - int detected_mode; + int pad, detected_mode, error; unsigned int defmode = 0; unsigned long mem_req; @@ -3139,8 +3115,12 @@ int __init atafb_init(void) printk("atafb_init: initializing Falcon hw\n"); fbhw = &falcon_switch; atafb_ops.fb_setcolreg = &falcon_setcolreg; - request_irq(IRQ_AUTO_4, falcon_vbl_switcher, IRQ_TYPE_PRIO, - "framebuffer/modeswitch", falcon_vbl_switcher); + error = request_irq(IRQ_AUTO_4, falcon_vbl_switcher, + IRQ_TYPE_PRIO, + "framebuffer/modeswitch", + falcon_vbl_switcher); + if (error) + return error; defmode = DEFMODE_F30; break; } @@ -3225,6 +3205,10 @@ int __init atafb_init(void) // tries to read from HW which may not be initialized yet // so set sane var first, then call atafb_set_par atafb_get_var(&fb_info.var, &fb_info); + +#ifdef ATAFB_FALCON + fb_info.pseudo_palette = current_par.hw.falcon.pseudo_palette; +#endif fb_info.flags = FBINFO_FLAG_DEFAULT; if (!fb_find_mode(&fb_info.var, &fb_info, mode_option, atafb_modedb, diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c index db16112cf19..2181ce4d7eb 100644 --- a/drivers/video/aty/aty128fb.c +++ b/drivers/video/aty/aty128fb.c @@ -1475,7 +1475,7 @@ static int aty128fb_set_par(struct fb_info *info) aty128_set_pll(&par->pll, par); aty128_set_fifo(&par->fifo_reg, par); - config = aty_ld_le32(CONFIG_CNTL) & ~3; + config = aty_ld_le32(CNFG_CNTL) & ~3; #if defined(__BIG_ENDIAN) if (par->crtc.bpp == 32) @@ -1484,7 +1484,7 @@ static int aty128fb_set_par(struct fb_info *info) config |= 1; /* make aperture do 16 bit swapping */ #endif - aty_st_le32(CONFIG_CNTL, config); + aty_st_le32(CNFG_CNTL, config); aty_st_8(CRTC_EXT_CNTL + 1, 0); /* turn the video back on */ info->fix.line_length = (par->crtc.vxres * par->crtc.bpp) >> 3; @@ -1875,7 +1875,7 @@ static int __devinit aty128_init(struct pci_dev *pdev, const struct pci_device_i u32 dac; /* Get the chip revision */ - chip_rev = (aty_ld_le32(CONFIG_CNTL) >> 16) & 0x1F; + chip_rev = (aty_ld_le32(CNFG_CNTL) >> 16) & 0x1F; strcpy(video_card, "Rage128 XX "); video_card[8] = ent->device >> 8; @@ -2057,7 +2057,7 @@ static int __devinit aty128_probe(struct pci_dev *pdev, const struct pci_device_ /* Grab memory size from the card */ // How does this relate to the resource length from the PCI hardware? - par->vram_size = aty_ld_le32(CONFIG_MEMSIZE) & 0x03FFFFFF; + par->vram_size = aty_ld_le32(CNFG_MEMSIZE) & 0x03FFFFFF; /* Virtualize the framebuffer */ info->screen_base = ioremap(fb_addr, par->vram_size); @@ -2365,7 +2365,6 @@ static void fbcon_aty128_bmove(struct display *p, int sy, int sx, int dy, int dx static void aty128_set_suspend(struct aty128fb_par *par, int suspend) { u32 pmgt; - u16 pwr_command; struct pci_dev *pdev = par->pdev; if (!par->pm_reg) @@ -2374,6 +2373,8 @@ static void aty128_set_suspend(struct aty128fb_par *par, int suspend) /* Set the chip into the appropriate suspend mode (we use D2, * D3 would require a complete re-initialisation of the chip, * including PCI config registers, clocks, AGP configuration, ...) + * + * For resume, the core will have already brought us back to D0 */ if (suspend) { /* Make sure CRTC2 is reset. Remove that the day we decide to @@ -2391,17 +2392,9 @@ static void aty128_set_suspend(struct aty128fb_par *par, int suspend) aty_st_le32(BUS_CNTL1, 0x00000010); aty_st_le32(MEM_POWER_MISC, 0x0c830000); mdelay(100); - pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command); + /* Switch PCI power management to D2 */ - pci_write_config_word(pdev, par->pm_reg+PCI_PM_CTRL, - (pwr_command & ~PCI_PM_CTRL_STATE_MASK) | 2); - pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command); - } else { - /* Switch back PCI power management to D0 */ - mdelay(100); - pci_write_config_word(pdev, par->pm_reg+PCI_PM_CTRL, 0); - pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command); - mdelay(100); + pci_set_power_state(pdev, PCI_D2); } } @@ -2410,6 +2403,12 @@ static int aty128_pci_suspend(struct pci_dev *pdev, pm_message_t state) struct fb_info *info = pci_get_drvdata(pdev); struct aty128fb_par *par = info->par; + /* Because we may change PCI D state ourselves, we need to + * first save the config space content so the core can + * restore it properly on resume. + */ + pci_save_state(pdev); + /* We don't do anything but D2, for now we return 0, but * we may want to change that. How do we know if the BIOS * can properly take care of D3 ? Also, with swsusp, we @@ -2476,6 +2475,11 @@ static int aty128_do_resume(struct pci_dev *pdev) if (pdev->dev.power.power_state.event == PM_EVENT_ON) return 0; + /* PCI state will have been restored by the core, so + * we should be in D0 now with our config space fully + * restored + */ + /* Wakeup chip */ aty128_set_suspend(par, 0); par->asleep = 0; diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c index cc6b470073d..1207c208a30 100644 --- a/drivers/video/aty/atyfb_base.c +++ b/drivers/video/aty/atyfb_base.c @@ -135,7 +135,7 @@ #if defined(CONFIG_PM) || defined(CONFIG_PMAC_BACKLIGHT) || \ defined (CONFIG_FB_ATY_GENERIC_LCD) || defined(CONFIG_FB_ATY_BACKLIGHT) static const u32 lt_lcd_regs[] = { - CONFIG_PANEL_LG, + CNFG_PANEL_LG, LCD_GEN_CNTL_LG, DSTN_CONTROL_LG, HFB_PITCH_ADDR_LG, @@ -446,7 +446,7 @@ static int __devinit correct_chipset(struct atyfb_par *par) par->pll_limits.ecp_max = aty_chips[i].ecp_max; par->features = aty_chips[i].features; - chip_id = aty_ld_le32(CONFIG_CHIP_ID, par); + chip_id = aty_ld_le32(CNFG_CHIP_ID, par); type = chip_id & CFG_CHIP_TYPE; rev = (chip_id & CFG_CHIP_REV) >> 24; @@ -629,7 +629,7 @@ static void aty_get_crtc(const struct atyfb_par *par, struct crtc *crtc) crtc->lcd_index = aty_ld_le32(LCD_INDEX, par); aty_st_le32(LCD_INDEX, crtc->lcd_index, par); } - crtc->lcd_config_panel = aty_ld_lcd(CONFIG_PANEL, par); + crtc->lcd_config_panel = aty_ld_lcd(CNFG_PANEL, par); crtc->lcd_gen_cntl = aty_ld_lcd(LCD_GEN_CNTL, par); @@ -676,7 +676,7 @@ static void aty_set_crtc(const struct atyfb_par *par, const struct crtc *crtc) aty_st_le32(CRTC_GEN_CNTL, crtc->gen_cntl & ~(CRTC_EXT_DISP_EN | CRTC_EN), par); /* update non-shadow registers first */ - aty_st_lcd(CONFIG_PANEL, crtc->lcd_config_panel, par); + aty_st_lcd(CNFG_PANEL, crtc->lcd_config_panel, par); aty_st_lcd(LCD_GEN_CNTL, crtc->lcd_gen_cntl & ~(CRTC_RW_SELECT | SHADOW_EN | SHADOW_RW_EN), par); @@ -858,7 +858,7 @@ static int aty_var_to_crtc(const struct fb_info *info, if (!M64_HAS(MOBIL_BUS)) crtc->lcd_index |= CRTC2_DISPLAY_DIS; - crtc->lcd_config_panel = aty_ld_lcd(CONFIG_PANEL, par) | 0x4000; + crtc->lcd_config_panel = aty_ld_lcd(CNFG_PANEL, par) | 0x4000; crtc->lcd_gen_cntl = aty_ld_lcd(LCD_GEN_CNTL, par) & ~CRTC_RW_SELECT; crtc->lcd_gen_cntl &= @@ -1978,7 +1978,7 @@ static int aty_power_mgmt(int sleep, struct atyfb_par *par) return timeout ? 0 : -EIO; } -#endif +#endif /* CONFIG_PPC_PMAC */ static int atyfb_pci_suspend(struct pci_dev *pdev, pm_message_t state) { @@ -2002,9 +2002,15 @@ static int atyfb_pci_suspend(struct pci_dev *pdev, pm_message_t state) par->asleep = 1; par->lock_blank = 1; + /* Because we may change PCI D state ourselves, we need to + * first save the config space content so the core can + * restore it properly on resume. + */ + pci_save_state(pdev); + #ifdef CONFIG_PPC_PMAC /* Set chip to "suspend" mode */ - if (aty_power_mgmt(1, par)) { + if (machine_is(powermac) && aty_power_mgmt(1, par)) { par->asleep = 0; par->lock_blank = 0; atyfb_blank(FB_BLANK_UNBLANK, info); @@ -2047,11 +2053,15 @@ static int atyfb_pci_resume(struct pci_dev *pdev) acquire_console_sem(); + /* PCI state will have been restored by the core, so + * we should be in D0 now with our config space fully + * restored + */ + #ifdef CONFIG_PPC_PMAC - if (pdev->dev.power.power_state.event == 2) + if (machine_is(powermac) && + pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) aty_power_mgmt(0, par); -#else - pci_set_power_state(pdev, PCI_D0); #endif aty_resume_chip(info); @@ -2254,7 +2264,7 @@ static int __devinit aty_init(struct fb_info *info) if (!M64_HAS(INTEGRATED)) { u32 stat0; u8 dac_type, dac_subtype, clk_type; - stat0 = aty_ld_le32(CONFIG_STAT0, par); + stat0 = aty_ld_le32(CNFG_STAT0, par); par->bus_type = (stat0 >> 0) & 0x07; par->ram_type = (stat0 >> 3) & 0x07; ramname = aty_gx_ram[par->ram_type]; @@ -2324,7 +2334,7 @@ static int __devinit aty_init(struct fb_info *info) par->dac_ops = &aty_dac_ct; par->pll_ops = &aty_pll_ct; par->bus_type = PCI; - par->ram_type = (aty_ld_le32(CONFIG_STAT0, par) & 0x07); + par->ram_type = (aty_ld_le32(CNFG_STAT0, par) & 0x07); ramname = aty_ct_ram[par->ram_type]; /* for many chips, the mclk is 67 MHz for SDRAM, 63 MHz otherwise */ if (par->pll_limits.mclk == 67 && par->ram_type < SDRAM) @@ -2433,7 +2443,7 @@ static int __devinit aty_init(struct fb_info *info) } if (M64_HAS(MAGIC_VRAM_SIZE)) { - if (aty_ld_le32(CONFIG_STAT1, par) & 0x40000000) + if (aty_ld_le32(CNFG_STAT1, par) & 0x40000000) info->fix.smem_len += 0x400000; } @@ -2946,7 +2956,7 @@ static int __devinit atyfb_setup_sparc(struct pci_dev *pdev, * Fix PROMs idea of MEM_CNTL settings... */ mem = aty_ld_le32(MEM_CNTL, par); - chip_id = aty_ld_le32(CONFIG_CHIP_ID, par); + chip_id = aty_ld_le32(CNFG_CHIP_ID, par); if (((chip_id & CFG_CHIP_TYPE) == VT_CHIP_ID) && !((chip_id >> 24) & 1)) { switch (mem & 0x0f) { case 3: @@ -2964,7 +2974,7 @@ static int __devinit atyfb_setup_sparc(struct pci_dev *pdev, default: break; } - if ((aty_ld_le32(CONFIG_STAT0, par) & 7) >= SDRAM) + if ((aty_ld_le32(CNFG_STAT0, par) & 7) >= SDRAM) mem &= ~(0x00700000); } mem &= ~(0xcf80e000); /* Turn off all undocumented bits. */ @@ -3572,7 +3582,7 @@ static int __init atyfb_atari_probe(void) } /* Fake pci_id for correct_chipset() */ - switch (aty_ld_le32(CONFIG_CHIP_ID, par) & CFG_CHIP_TYPE) { + switch (aty_ld_le32(CNFG_CHIP_ID, par) & CFG_CHIP_TYPE) { case 0x00d7: par->pci_id = PCI_CHIP_MACH64GX; break; diff --git a/drivers/video/aty/mach64_ct.c b/drivers/video/aty/mach64_ct.c index c50c7cf26fe..2745b853948 100644 --- a/drivers/video/aty/mach64_ct.c +++ b/drivers/video/aty/mach64_ct.c @@ -8,6 +8,9 @@ #include <asm/io.h> #include <video/mach64.h> #include "atyfb.h" +#ifdef CONFIG_PPC +#include <asm/machdep.h> +#endif #undef DEBUG @@ -536,6 +539,14 @@ static int __devinit aty_init_pll_ct(const struct fb_info *info, pll->ct.xclk_post_div_real = postdividers[xpost_div]; pll->ct.mclk_fb_div = q * pll->ct.xclk_post_div_real / 8; +#ifdef CONFIG_PPC + if (machine_is(powermac)) { + /* Override PLL_EXT_CNTL & 0x07. */ + pll->ct.xclk_post_div = xpost_div; + pll->ct.xclk_ref_div = 1; + } +#endif + #ifdef DEBUG pllmclk = (1000000 * pll->ct.mclk_fb_mult * pll->ct.mclk_fb_div) / (par->ref_clk_per * pll->ct.pll_ref_div); diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c index d0f1a7fc2c9..16bb7e3c031 100644 --- a/drivers/video/aty/radeon_base.c +++ b/drivers/video/aty/radeon_base.c @@ -1936,8 +1936,8 @@ static void fixup_memory_mappings(struct radeonfb_info *rinfo) OUTREG(CRTC_GEN_CNTL, save_crtc_gen_cntl | CRTC_DISP_REQ_EN_B); mdelay(100); - aper_base = INREG(CONFIG_APER_0_BASE); - aper_size = INREG(CONFIG_APER_SIZE); + aper_base = INREG(CNFG_APER_0_BASE); + aper_size = INREG(CNFG_APER_SIZE); #ifdef SET_MC_FB_FROM_APERTURE /* Set framebuffer to be at the same address as set in PCI BAR */ @@ -2024,11 +2024,11 @@ static void radeon_identify_vram(struct radeonfb_info *rinfo) ~CRTC_H_CUTOFF_ACTIVE_EN); } } else { - tmp = INREG(CONFIG_MEMSIZE); + tmp = INREG(CNFG_MEMSIZE); } /* mem size is bits [28:0], mask off the rest */ - rinfo->video_ram = tmp & CONFIG_MEMSIZE_MASK; + rinfo->video_ram = tmp & CNFG_MEMSIZE_MASK; /* * Hack to get around some busted production M6's @@ -2228,7 +2228,7 @@ static int __devinit radeonfb_pci_register (struct pci_dev *pdev, */ rinfo->errata = 0; if (rinfo->family == CHIP_FAMILY_R300 && - (INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) + (INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK) == CFG_ATI_REV_A11) rinfo->errata |= CHIP_ERRATA_R300_CG; diff --git a/drivers/video/aty/radeon_i2c.c b/drivers/video/aty/radeon_i2c.c index 2c5567175dc..359fc64e761 100644 --- a/drivers/video/aty/radeon_i2c.c +++ b/drivers/video/aty/radeon_i2c.c @@ -72,7 +72,6 @@ static int radeon_setup_i2c_bus(struct radeon_i2c_chan *chan, const char *name) snprintf(chan->adapter.name, sizeof(chan->adapter.name), "radeonfb %s", name); chan->adapter.owner = THIS_MODULE; - chan->adapter.id = I2C_HW_B_RADEON; chan->adapter.algo_data = &chan->algo; chan->adapter.dev.parent = &chan->rinfo->pdev->dev; chan->algo.setsda = radeon_gpio_setsda; diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c index 675abdafc2d..ca5f0dc2854 100644 --- a/drivers/video/aty/radeon_pm.c +++ b/drivers/video/aty/radeon_pm.c @@ -333,7 +333,7 @@ static void radeon_pm_enable_dynamic_mode(struct radeonfb_info *rinfo) if (!rinfo->has_CRTC2) { tmp = INPLL(pllSCLK_CNTL); - if ((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) > CFG_ATI_REV_A13) + if ((INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK) > CFG_ATI_REV_A13) tmp &= ~(SCLK_CNTL__FORCE_CP | SCLK_CNTL__FORCE_RB); tmp &= ~(SCLK_CNTL__FORCE_HDP | SCLK_CNTL__FORCE_DISP1 | SCLK_CNTL__FORCE_TOP | SCLK_CNTL__FORCE_SE | @@ -468,9 +468,9 @@ static void radeon_pm_enable_dynamic_mode(struct radeonfb_info *rinfo) /*RAGE_6::A11 A12 A12N1 A13, RV250::A11 A12, R300*/ if ((rinfo->family == CHIP_FAMILY_RV250 && - ((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13)) || + ((INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13)) || ((rinfo->family == CHIP_FAMILY_RV100) && - ((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) <= CFG_ATI_REV_A13))) { + ((INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK) <= CFG_ATI_REV_A13))) { tmp |= SCLK_CNTL__FORCE_CP; tmp |= SCLK_CNTL__FORCE_VIP; } @@ -486,7 +486,7 @@ static void radeon_pm_enable_dynamic_mode(struct radeonfb_info *rinfo) /* RV200::A11 A12 RV250::A11 A12 */ if (((rinfo->family == CHIP_FAMILY_RV200) || (rinfo->family == CHIP_FAMILY_RV250)) && - ((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13)) + ((INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13)) tmp |= SCLK_MORE_CNTL__FORCEON; OUTPLL(pllSCLK_MORE_CNTL, tmp); @@ -497,7 +497,7 @@ static void radeon_pm_enable_dynamic_mode(struct radeonfb_info *rinfo) /* RV200::A11 A12, RV250::A11 A12 */ if (((rinfo->family == CHIP_FAMILY_RV200) || (rinfo->family == CHIP_FAMILY_RV250)) && - ((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13)) { + ((INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13)) { tmp = INPLL(pllPLL_PWRMGT_CNTL); tmp |= PLL_PWRMGT_CNTL__TCL_BYPASS_DISABLE; OUTPLL(pllPLL_PWRMGT_CNTL, tmp); @@ -702,7 +702,7 @@ static void radeon_pm_restore_regs(struct radeonfb_info *rinfo) OUTREG(DISPLAY_BASE_ADDR, rinfo->save_regs[31]); OUTREG(MC_AGP_LOCATION, rinfo->save_regs[32]); OUTREG(CRTC2_DISPLAY_BASE_ADDR, rinfo->save_regs[33]); - OUTREG(CONFIG_MEMSIZE, rinfo->video_ram); + OUTREG(CNFG_MEMSIZE, rinfo->video_ram); OUTREG(DISP_MISC_CNTL, rinfo->save_regs[9]); OUTREG(DISP_PWR_MAN, rinfo->save_regs[10]); @@ -1723,7 +1723,7 @@ static void radeon_reinitialize_M10(struct radeonfb_info *rinfo) OUTREG(CRTC2_DISPLAY_BASE_ADDR, rinfo->save_regs[33]); OUTREG(MC_FB_LOCATION, rinfo->save_regs[30]); OUTREG(OV0_BASE_ADDR, rinfo->save_regs[80]); - OUTREG(CONFIG_MEMSIZE, rinfo->video_ram); + OUTREG(CNFG_MEMSIZE, rinfo->video_ram); OUTREG(BUS_CNTL, rinfo->save_regs[36]); OUTREG(BUS_CNTL1, rinfo->save_regs[14]); OUTREG(MPP_TB_CONFIG, rinfo->save_regs[37]); @@ -1961,7 +1961,7 @@ static void radeon_pm_m9p_reconfigure_mc(struct radeonfb_info *rinfo) OUTMC(rinfo, ixMC_CHP_IO_CNTL_B1, rinfo->save_regs[68] /*0x141555ff*/); OUTMC(rinfo, ixMC_IMP_CNTL_0, rinfo->save_regs[71] /*0x00009249*/); OUTREG(MC_IND_INDEX, 0); - OUTREG(CONFIG_MEMSIZE, rinfo->video_ram); + OUTREG(CNFG_MEMSIZE, rinfo->video_ram); mdelay(20); } @@ -2361,7 +2361,7 @@ static void radeon_reinitialize_QW(struct radeonfb_info *rinfo) OUTMC(rinfo, ixMC_IMP_CNTL_0, 0x00009249); OUTREG(MC_IND_INDEX, 0); - OUTREG(CONFIG_MEMSIZE, rinfo->video_ram); + OUTREG(CNFG_MEMSIZE, rinfo->video_ram); radeon_pm_full_reset_sdram(rinfo); @@ -2509,9 +2509,7 @@ static void radeon_reinitialize_QW(struct radeonfb_info *rinfo) static void radeon_set_suspend(struct radeonfb_info *rinfo, int suspend) { - u16 pwr_cmd; u32 tmp; - int i; if (!rinfo->pm_reg) return; @@ -2557,32 +2555,14 @@ static void radeon_set_suspend(struct radeonfb_info *rinfo, int suspend) } } - for (i = 0; i < 64; ++i) - pci_read_config_dword(rinfo->pdev, i * 4, - &rinfo->cfg_save[i]); - /* Switch PCI power management to D2. */ pci_disable_device(rinfo->pdev); - for (;;) { - pci_read_config_word( - rinfo->pdev, rinfo->pm_reg+PCI_PM_CTRL, - &pwr_cmd); - if (pwr_cmd & 2) - break; - pci_write_config_word( - rinfo->pdev, rinfo->pm_reg+PCI_PM_CTRL, - (pwr_cmd & ~PCI_PM_CTRL_STATE_MASK) | 2); - mdelay(500); - } + pci_save_state(rinfo->pdev); + pci_set_power_state(rinfo->pdev, PCI_D2); } else { printk(KERN_DEBUG "radeonfb (%s): switching to D0 state...\n", pci_name(rinfo->pdev)); - /* Switch back PCI powermanagment to D0 */ - mdelay(200); - pci_write_config_word(rinfo->pdev, rinfo->pm_reg+PCI_PM_CTRL, 0); - mdelay(500); - if (rinfo->family <= CHIP_FAMILY_RV250) { /* Reset the SDRAM controller */ radeon_pm_full_reset_sdram(rinfo); @@ -2598,37 +2578,10 @@ static void radeon_set_suspend(struct radeonfb_info *rinfo, int suspend) } } -static int radeon_restore_pci_cfg(struct radeonfb_info *rinfo) -{ - int i; - static u32 radeon_cfg_after_resume[64]; - - for (i = 0; i < 64; ++i) - pci_read_config_dword(rinfo->pdev, i * 4, - &radeon_cfg_after_resume[i]); - - if (radeon_cfg_after_resume[PCI_BASE_ADDRESS_0/4] - == rinfo->cfg_save[PCI_BASE_ADDRESS_0/4]) - return 0; /* assume everything is ok */ - - for (i = PCI_BASE_ADDRESS_0/4; i < 64; ++i) { - if (radeon_cfg_after_resume[i] != rinfo->cfg_save[i]) - pci_write_config_dword(rinfo->pdev, i * 4, - rinfo->cfg_save[i]); - } - pci_write_config_word(rinfo->pdev, PCI_CACHE_LINE_SIZE, - rinfo->cfg_save[PCI_CACHE_LINE_SIZE/4]); - pci_write_config_word(rinfo->pdev, PCI_COMMAND, - rinfo->cfg_save[PCI_COMMAND/4]); - return 1; -} - - int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg) { struct fb_info *info = pci_get_drvdata(pdev); struct radeonfb_info *rinfo = info->par; - int i; if (mesg.event == pdev->dev.power.power_state.event) return 0; @@ -2674,6 +2627,11 @@ int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg) pmac_suspend_agp_for_card(pdev); #endif /* CONFIG_PPC_PMAC */ + /* It's unclear whether or when the generic code will do that, so let's + * do it ourselves. We save state before we do any power management + */ + pci_save_state(pdev); + /* If we support wakeup from poweroff, we save all regs we can including cfg * space */ @@ -2698,9 +2656,6 @@ int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg) mdelay(20); OUTREG(LVDS_GEN_CNTL, INREG(LVDS_GEN_CNTL) & ~(LVDS_DIGON)); } - // FIXME: Use PCI layer - for (i = 0; i < 64; ++i) - pci_read_config_dword(pdev, i * 4, &rinfo->cfg_save[i]); pci_disable_device(pdev); } /* If we support D2, we go to it (should be fixed later with a flag forcing @@ -2717,6 +2672,13 @@ int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg) return 0; } +static int radeon_check_power_loss(struct radeonfb_info *rinfo) +{ + return rinfo->save_regs[4] != INPLL(CLK_PIN_CNTL) || + rinfo->save_regs[2] != INPLL(MCLK_CNTL) || + rinfo->save_regs[3] != INPLL(SCLK_CNTL); +} + int radeonfb_pci_resume(struct pci_dev *pdev) { struct fb_info *info = pci_get_drvdata(pdev); @@ -2735,20 +2697,13 @@ int radeonfb_pci_resume(struct pci_dev *pdev) printk(KERN_DEBUG "radeonfb (%s): resuming from state: %d...\n", pci_name(pdev), pdev->dev.power.power_state.event); - - if (pci_enable_device(pdev)) { - rc = -ENODEV; - printk(KERN_ERR "radeonfb (%s): can't enable PCI device !\n", - pci_name(pdev)); - goto bail; - } - pci_set_master(pdev); - + /* PCI state will have been restored by the core, so + * we should be in D0 now with our config space fully + * restored + */ if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) { - /* Wakeup chip. Check from config space if we were powered off - * (todo: additionally, check CLK_PIN_CNTL too) - */ - if ((rinfo->pm_mode & radeon_pm_off) && radeon_restore_pci_cfg(rinfo)) { + /* Wakeup chip */ + if ((rinfo->pm_mode & radeon_pm_off) && radeon_check_power_loss(rinfo)) { if (rinfo->reinit_func != NULL) rinfo->reinit_func(rinfo); else { diff --git a/drivers/video/aty/radeonfb.h b/drivers/video/aty/radeonfb.h index 3ea1b00fdd2..7351e66c7f5 100644 --- a/drivers/video/aty/radeonfb.h +++ b/drivers/video/aty/radeonfb.h @@ -361,8 +361,6 @@ struct radeonfb_info { #ifdef CONFIG_FB_RADEON_I2C struct radeon_i2c_chan i2c[4]; #endif - - u32 cfg_save[64]; }; diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile index 363b3cb2f01..63d75949816 100644 --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile @@ -18,7 +18,7 @@ obj-$(CONFIG_BACKLIGHT_OMAP1) += omap1_bl.o obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o obj-$(CONFIG_BACKLIGHT_PWM) += pwm_bl.o -obj-$(CONFIG_BACKLIGHT_DA903X) += da903x.o +obj-$(CONFIG_BACKLIGHT_DA903X) += da903x_bl.o obj-$(CONFIG_BACKLIGHT_MBP_NVIDIA) += mbp_nvidia_bl.o obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o diff --git a/drivers/video/backlight/da903x.c b/drivers/video/backlight/da903x_bl.c index 93bb4340cc6..93bb4340cc6 100644 --- a/drivers/video/backlight/da903x.c +++ b/drivers/video/backlight/da903x_bl.c diff --git a/drivers/video/bf54x-lq043fb.c b/drivers/video/bf54x-lq043fb.c index 7644ed24956..37e60b1d2ed 100644 --- a/drivers/video/bf54x-lq043fb.c +++ b/drivers/video/bf54x-lq043fb.c @@ -335,7 +335,20 @@ static int bfin_bf54x_fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) { - if (var->bits_per_pixel != LCD_BPP) { + switch (var->bits_per_pixel) { + case 24:/* TRUECOLOUR, 16m */ + var->red.offset = 16; + var->green.offset = 8; + var->blue.offset = 0; + var->red.length = var->green.length = var->blue.length = 8; + var->transp.offset = 0; + var->transp.length = 0; + var->transp.msb_right = 0; + var->red.msb_right = 0; + var->green.msb_right = 0; + var->blue.msb_right = 0; + break; + default: pr_debug("%s: depth not supported: %u BPP\n", __func__, var->bits_per_pixel); return -EINVAL; diff --git a/drivers/video/bfin-t350mcqb-fb.c b/drivers/video/bfin-t350mcqb-fb.c index a9b3ada05d9..90cfddabf1f 100644 --- a/drivers/video/bfin-t350mcqb-fb.c +++ b/drivers/video/bfin-t350mcqb-fb.c @@ -254,7 +254,20 @@ static int bfin_t350mcqb_fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) { - if (var->bits_per_pixel != LCD_BPP) { + switch (var->bits_per_pixel) { + case 24:/* TRUECOLOUR, 16m */ + var->red.offset = 0; + var->green.offset = 8; + var->blue.offset = 16; + var->red.length = var->green.length = var->blue.length = 8; + var->transp.offset = 0; + var->transp.length = 0; + var->transp.msb_right = 0; + var->red.msb_right = 0; + var->green.msb_right = 0; + var->blue.msb_right = 0; + break; + default: pr_debug("%s: depth not supported: %u BPP\n", __func__, var->bits_per_pixel); return -EINVAL; @@ -434,7 +447,7 @@ static irqreturn_t bfin_t350mcqb_irq_error(int irq, void *dev_id) return IRQ_HANDLED; } -static int __init bfin_t350mcqb_probe(struct platform_device *pdev) +static int __devinit bfin_t350mcqb_probe(struct platform_device *pdev) { struct bfin_t350mcqbfb_info *info; struct fb_info *fbinfo; diff --git a/drivers/video/c2p.c b/drivers/video/c2p.c deleted file mode 100644 index 376bc07ff95..00000000000 --- a/drivers/video/c2p.c +++ /dev/null @@ -1,232 +0,0 @@ -/* - * Fast C2P (Chunky-to-Planar) Conversion - * - * Copyright (C) 2003 Geert Uytterhoeven - * - * NOTES: - * - This code was inspired by Scout's C2P tutorial - * - It assumes to run on a big endian system - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - */ - -#include <linux/module.h> -#include <linux/string.h> -#include "c2p.h" - - - /* - * Basic transpose step - */ - -#define _transp(d, i1, i2, shift, mask) \ - do { \ - u32 t = (d[i1] ^ (d[i2] >> shift)) & mask; \ - d[i1] ^= t; \ - d[i2] ^= t << shift; \ - } while (0) - -static inline u32 get_mask(int n) -{ - switch (n) { - case 1: - return 0x55555555; - break; - - case 2: - return 0x33333333; - break; - - case 4: - return 0x0f0f0f0f; - break; - - case 8: - return 0x00ff00ff; - break; - - case 16: - return 0x0000ffff; - break; - } - return 0; -} - -#define transp_nx1(d, n) \ - do { \ - u32 mask = get_mask(n); \ - /* First block */ \ - _transp(d, 0, 1, n, mask); \ - /* Second block */ \ - _transp(d, 2, 3, n, mask); \ - /* Third block */ \ - _transp(d, 4, 5, n, mask); \ - /* Fourth block */ \ - _transp(d, 6, 7, n, mask); \ - } while (0) - -#define transp_nx2(d, n) \ - do { \ - u32 mask = get_mask(n); \ - /* First block */ \ - _transp(d, 0, 2, n, mask); \ - _transp(d, 1, 3, n, mask); \ - /* Second block */ \ - _transp(d, 4, 6, n, mask); \ - _transp(d, 5, 7, n, mask); \ - } while (0) - -#define transp_nx4(d, n) \ - do { \ - u32 mask = get_mask(n); \ - _transp(d, 0, 4, n, mask); \ - _transp(d, 1, 5, n, mask); \ - _transp(d, 2, 6, n, mask); \ - _transp(d, 3, 7, n, mask); \ - } while (0) - -#define transp(d, n, m) transp_nx ## m(d, n) - - - /* - * Perform a full C2P step on 32 8-bit pixels, stored in 8 32-bit words - * containing - * - 32 8-bit chunky pixels on input - * - permuted planar data on output - */ - -static void c2p_8bpp(u32 d[8]) -{ - transp(d, 16, 4); - transp(d, 8, 2); - transp(d, 4, 1); - transp(d, 2, 4); - transp(d, 1, 2); -} - - - /* - * Array containing the permution indices of the planar data after c2p - */ - -static const int perm_c2p_8bpp[8] = { 7, 5, 3, 1, 6, 4, 2, 0 }; - - - /* - * Compose two values, using a bitmask as decision value - * This is equivalent to (a & mask) | (b & ~mask) - */ - -static inline unsigned long comp(unsigned long a, unsigned long b, - unsigned long mask) -{ - return ((a ^ b) & mask) ^ b; -} - - - /* - * Store a full block of planar data after c2p conversion - */ - -static inline void store_planar(char *dst, u32 dst_inc, u32 bpp, u32 d[8]) -{ - int i; - - for (i = 0; i < bpp; i++, dst += dst_inc) - *(u32 *)dst = d[perm_c2p_8bpp[i]]; -} - - - /* - * Store a partial block of planar data after c2p conversion - */ - -static inline void store_planar_masked(char *dst, u32 dst_inc, u32 bpp, - u32 d[8], u32 mask) -{ - int i; - - for (i = 0; i < bpp; i++, dst += dst_inc) - *(u32 *)dst = comp(d[perm_c2p_8bpp[i]], *(u32 *)dst, mask); -} - - - /* - * c2p - Copy 8-bit chunky image data to a planar frame buffer - * @dst: Starting address of the planar frame buffer - * @dx: Horizontal destination offset (in pixels) - * @dy: Vertical destination offset (in pixels) - * @width: Image width (in pixels) - * @height: Image height (in pixels) - * @dst_nextline: Frame buffer offset to the next line (in bytes) - * @dst_nextplane: Frame buffer offset to the next plane (in bytes) - * @src_nextline: Image offset to the next line (in bytes) - * @bpp: Bits per pixel of the planar frame buffer (1-8) - */ - -void c2p(u8 *dst, const u8 *src, u32 dx, u32 dy, u32 width, u32 height, - u32 dst_nextline, u32 dst_nextplane, u32 src_nextline, u32 bpp) -{ - int dst_idx; - u32 d[8], first, last, w; - const u8 *c; - u8 *p; - - dst += dy*dst_nextline+(dx & ~31); - dst_idx = dx % 32; - first = ~0UL >> dst_idx; - last = ~(~0UL >> ((dst_idx+width) % 32)); - while (height--) { - c = src; - p = dst; - w = width; - if (dst_idx+width <= 32) { - /* Single destination word */ - first &= last; - memset(d, 0, sizeof(d)); - memcpy((u8 *)d+dst_idx, c, width); - c += width; - c2p_8bpp(d); - store_planar_masked(p, dst_nextplane, bpp, d, first); - p += 4; - } else { - /* Multiple destination words */ - w = width; - /* Leading bits */ - if (dst_idx) { - w = 32 - dst_idx; - memset(d, 0, dst_idx); - memcpy((u8 *)d+dst_idx, c, w); - c += w; - c2p_8bpp(d); - store_planar_masked(p, dst_nextplane, bpp, d, first); - p += 4; - w = width-w; - } - /* Main chunk */ - while (w >= 32) { - memcpy(d, c, 32); - c += 32; - c2p_8bpp(d); - store_planar(p, dst_nextplane, bpp, d); - p += 4; - w -= 32; - } - /* Trailing bits */ - w %= 32; - if (w > 0) { - memcpy(d, c, w); - memset((u8 *)d+w, 0, 32-w); - c2p_8bpp(d); - store_planar_masked(p, dst_nextplane, bpp, d, last); - } - } - src += src_nextline; - dst += dst_nextline; - } -} -EXPORT_SYMBOL_GPL(c2p); - -MODULE_LICENSE("GPL"); diff --git a/drivers/video/c2p.h b/drivers/video/c2p.h index c77cbf17e04..6c38d40427d 100644 --- a/drivers/video/c2p.h +++ b/drivers/video/c2p.h @@ -1,7 +1,7 @@ /* * Fast C2P (Chunky-to-Planar) Conversion * - * Copyright (C) 2003 Geert Uytterhoeven + * Copyright (C) 2003-2008 Geert Uytterhoeven * * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive @@ -10,7 +10,10 @@ #include <linux/types.h> -extern void c2p(u8 *dst, const u8 *src, u32 dx, u32 dy, u32 width, u32 height, - u32 dst_nextline, u32 dst_nextplane, u32 src_nextline, - u32 bpp); +extern void c2p_planar(void *dst, const void *src, u32 dx, u32 dy, u32 width, + u32 height, u32 dst_nextline, u32 dst_nextplane, + u32 src_nextline, u32 bpp); +extern void c2p_iplan2(void *dst, const void *src, u32 dx, u32 dy, u32 width, + u32 height, u32 dst_nextline, u32 src_nextline, + u32 bpp); diff --git a/drivers/video/c2p_core.h b/drivers/video/c2p_core.h new file mode 100644 index 00000000000..e1035a865fb --- /dev/null +++ b/drivers/video/c2p_core.h @@ -0,0 +1,153 @@ +/* + * Fast C2P (Chunky-to-Planar) Conversion + * + * Copyright (C) 2003-2008 Geert Uytterhoeven + * + * NOTES: + * - This code was inspired by Scout's C2P tutorial + * - It assumes to run on a big endian system + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + + + /* + * Basic transpose step + */ + +static inline void _transp(u32 d[], unsigned int i1, unsigned int i2, + unsigned int shift, u32 mask) +{ + u32 t = (d[i1] ^ (d[i2] >> shift)) & mask; + + d[i1] ^= t; + d[i2] ^= t << shift; +} + + +extern void c2p_unsupported(void); + +static inline u32 get_mask(unsigned int n) +{ + switch (n) { + case 1: + return 0x55555555; + + case 2: + return 0x33333333; + + case 4: + return 0x0f0f0f0f; + + case 8: + return 0x00ff00ff; + + case 16: + return 0x0000ffff; + } + + c2p_unsupported(); + return 0; +} + + + /* + * Transpose operations on 8 32-bit words + */ + +static inline void transp8(u32 d[], unsigned int n, unsigned int m) +{ + u32 mask = get_mask(n); + + switch (m) { + case 1: + /* First n x 1 block */ + _transp(d, 0, 1, n, mask); + /* Second n x 1 block */ + _transp(d, 2, 3, n, mask); + /* Third n x 1 block */ + _transp(d, 4, 5, n, mask); + /* Fourth n x 1 block */ + _transp(d, 6, 7, n, mask); + return; + + case 2: + /* First n x 2 block */ + _transp(d, 0, 2, n, mask); + _transp(d, 1, 3, n, mask); + /* Second n x 2 block */ + _transp(d, 4, 6, n, mask); + _transp(d, 5, 7, n, mask); + return; + + case 4: + /* Single n x 4 block */ + _transp(d, 0, 4, n, mask); + _transp(d, 1, 5, n, mask); + _transp(d, 2, 6, n, mask); + _transp(d, 3, 7, n, mask); + return; + } + + c2p_unsupported(); +} + + + /* + * Transpose operations on 4 32-bit words + */ + +static inline void transp4(u32 d[], unsigned int n, unsigned int m) +{ + u32 mask = get_mask(n); + + switch (m) { + case 1: + /* First n x 1 block */ + _transp(d, 0, 1, n, mask); + /* Second n x 1 block */ + _transp(d, 2, 3, n, mask); + return; + + case 2: + /* Single n x 2 block */ + _transp(d, 0, 2, n, mask); + _transp(d, 1, 3, n, mask); + return; + } + + c2p_unsupported(); +} + + + /* + * Transpose operations on 4 32-bit words (reverse order) + */ + +static inline void transp4x(u32 d[], unsigned int n, unsigned int m) +{ + u32 mask = get_mask(n); + + switch (m) { + case 2: + /* Single n x 2 block */ + _transp(d, 2, 0, n, mask); + _transp(d, 3, 1, n, mask); + return; + } + + c2p_unsupported(); +} + + + /* + * Compose two values, using a bitmask as decision value + * This is equivalent to (a & mask) | (b & ~mask) + */ + +static inline u32 comp(u32 a, u32 b, u32 mask) +{ + return ((a ^ b) & mask) ^ b; +} diff --git a/drivers/video/c2p_iplan2.c b/drivers/video/c2p_iplan2.c new file mode 100644 index 00000000000..19156dc6158 --- /dev/null +++ b/drivers/video/c2p_iplan2.c @@ -0,0 +1,153 @@ +/* + * Fast C2P (Chunky-to-Planar) Conversion + * + * Copyright (C) 2003-2008 Geert Uytterhoeven + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +#include <linux/module.h> +#include <linux/string.h> + +#include <asm/unaligned.h> + +#include "c2p.h" +#include "c2p_core.h" + + + /* + * Perform a full C2P step on 16 8-bit pixels, stored in 4 32-bit words + * containing + * - 16 8-bit chunky pixels on input + * - permutated planar data (2 planes per 32-bit word) on output + */ + +static void c2p_16x8(u32 d[4]) +{ + transp4(d, 8, 2); + transp4(d, 1, 2); + transp4x(d, 16, 2); + transp4x(d, 2, 2); + transp4(d, 4, 1); +} + + + /* + * Array containing the permutation indices of the planar data after c2p + */ + +static const int perm_c2p_16x8[4] = { 1, 3, 0, 2 }; + + + /* + * Store a full block of iplan2 data after c2p conversion + */ + +static inline void store_iplan2(void *dst, u32 bpp, u32 d[4]) +{ + int i; + + for (i = 0; i < bpp/2; i++, dst += 4) + put_unaligned_be32(d[perm_c2p_16x8[i]], dst); +} + + + /* + * Store a partial block of iplan2 data after c2p conversion + */ + +static inline void store_iplan2_masked(void *dst, u32 bpp, u32 d[4], u32 mask) +{ + int i; + + for (i = 0; i < bpp/2; i++, dst += 4) + put_unaligned_be32(comp(d[perm_c2p_16x8[i]], + get_unaligned_be32(dst), mask), + dst); +} + + + /* + * c2p_iplan2 - Copy 8-bit chunky image data to an interleaved planar + * frame buffer with 2 bytes of interleave + * @dst: Starting address of the planar frame buffer + * @dx: Horizontal destination offset (in pixels) + * @dy: Vertical destination offset (in pixels) + * @width: Image width (in pixels) + * @height: Image height (in pixels) + * @dst_nextline: Frame buffer offset to the next line (in bytes) + * @src_nextline: Image offset to the next line (in bytes) + * @bpp: Bits per pixel of the planar frame buffer (2, 4, or 8) + */ + +void c2p_iplan2(void *dst, const void *src, u32 dx, u32 dy, u32 width, + u32 height, u32 dst_nextline, u32 src_nextline, u32 bpp) +{ + union { + u8 pixels[16]; + u32 words[4]; + } d; + u32 dst_idx, first, last, w; + const u8 *c; + void *p; + + dst += dy*dst_nextline+(dx & ~15)*bpp; + dst_idx = dx % 16; + first = 0xffffU >> dst_idx; + first |= first << 16; + last = 0xffffU ^ (0xffffU >> ((dst_idx+width) % 16)); + last |= last << 16; + while (height--) { + c = src; + p = dst; + w = width; + if (dst_idx+width <= 16) { + /* Single destination word */ + first &= last; + memset(d.pixels, 0, sizeof(d)); + memcpy(d.pixels+dst_idx, c, width); + c += width; + c2p_16x8(d.words); + store_iplan2_masked(p, bpp, d.words, first); + p += bpp*2; + } else { + /* Multiple destination words */ + w = width; + /* Leading bits */ + if (dst_idx) { + w = 16 - dst_idx; + memset(d.pixels, 0, dst_idx); + memcpy(d.pixels+dst_idx, c, w); + c += w; + c2p_16x8(d.words); + store_iplan2_masked(p, bpp, d.words, first); + p += bpp*2; + w = width-w; + } + /* Main chunk */ + while (w >= 16) { + memcpy(d.pixels, c, 16); + c += 16; + c2p_16x8(d.words); + store_iplan2(p, bpp, d.words); + p += bpp*2; + w -= 16; + } + /* Trailing bits */ + w %= 16; + if (w > 0) { + memcpy(d.pixels, c, w); + memset(d.pixels+w, 0, 16-w); + c2p_16x8(d.words); + store_iplan2_masked(p, bpp, d.words, last); + } + } + src += src_nextline; + dst += dst_nextline; + } +} +EXPORT_SYMBOL_GPL(c2p_iplan2); + +MODULE_LICENSE("GPL"); diff --git a/drivers/video/c2p_planar.c b/drivers/video/c2p_planar.c new file mode 100644 index 00000000000..ec7ac8526f0 --- /dev/null +++ b/drivers/video/c2p_planar.c @@ -0,0 +1,156 @@ +/* + * Fast C2P (Chunky-to-Planar) Conversion + * + * Copyright (C) 2003-2008 Geert Uytterhoeven + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +#include <linux/module.h> +#include <linux/string.h> + +#include <asm/unaligned.h> + +#include "c2p.h" +#include "c2p_core.h" + + + /* + * Perform a full C2P step on 32 8-bit pixels, stored in 8 32-bit words + * containing + * - 32 8-bit chunky pixels on input + * - permutated planar data (1 plane per 32-bit word) on output + */ + +static void c2p_32x8(u32 d[8]) +{ + transp8(d, 16, 4); + transp8(d, 8, 2); + transp8(d, 4, 1); + transp8(d, 2, 4); + transp8(d, 1, 2); +} + + + /* + * Array containing the permutation indices of the planar data after c2p + */ + +static const int perm_c2p_32x8[8] = { 7, 5, 3, 1, 6, 4, 2, 0 }; + + + /* + * Store a full block of planar data after c2p conversion + */ + +static inline void store_planar(void *dst, u32 dst_inc, u32 bpp, u32 d[8]) +{ + int i; + + for (i = 0; i < bpp; i++, dst += dst_inc) + put_unaligned_be32(d[perm_c2p_32x8[i]], dst); +} + + + /* + * Store a partial block of planar data after c2p conversion + */ + +static inline void store_planar_masked(void *dst, u32 dst_inc, u32 bpp, + u32 d[8], u32 mask) +{ + int i; + + for (i = 0; i < bpp; i++, dst += dst_inc) + put_unaligned_be32(comp(d[perm_c2p_32x8[i]], + get_unaligned_be32(dst), mask), + dst); +} + + + /* + * c2p_planar - Copy 8-bit chunky image data to a planar frame buffer + * @dst: Starting address of the planar frame buffer + * @dx: Horizontal destination offset (in pixels) + * @dy: Vertical destination offset (in pixels) + * @width: Image width (in pixels) + * @height: Image height (in pixels) + * @dst_nextline: Frame buffer offset to the next line (in bytes) + * @dst_nextplane: Frame buffer offset to the next plane (in bytes) + * @src_nextline: Image offset to the next line (in bytes) + * @bpp: Bits per pixel of the planar frame buffer (1-8) + */ + +void c2p_planar(void *dst, const void *src, u32 dx, u32 dy, u32 width, + u32 height, u32 dst_nextline, u32 dst_nextplane, + u32 src_nextline, u32 bpp) +{ + union { + u8 pixels[32]; + u32 words[8]; + } d; + u32 dst_idx, first, last, w; + const u8 *c; + void *p; + + dst += dy*dst_nextline+(dx & ~31); + dst_idx = dx % 32; + first = 0xffffffffU >> dst_idx; + last = ~(0xffffffffU >> ((dst_idx+width) % 32)); + while (height--) { + c = src; + p = dst; + w = width; + if (dst_idx+width <= 32) { + /* Single destination word */ + first &= last; + memset(d.pixels, 0, sizeof(d)); + memcpy(d.pixels+dst_idx, c, width); + c += width; + c2p_32x8(d.words); + store_planar_masked(p, dst_nextplane, bpp, d.words, + first); + p += 4; + } else { + /* Multiple destination words */ + w = width; + /* Leading bits */ + if (dst_idx) { + w = 32 - dst_idx; + memset(d.pixels, 0, dst_idx); + memcpy(d.pixels+dst_idx, c, w); + c += w; + c2p_32x8(d.words); + store_planar_masked(p, dst_nextplane, bpp, + d.words, first); + p += 4; + w = width-w; + } + /* Main chunk */ + while (w >= 32) { + memcpy(d.pixels, c, 32); + c += 32; + c2p_32x8(d.words); + store_planar(p, dst_nextplane, bpp, d.words); + p += 4; + w -= 32; + } + /* Trailing bits */ + w %= 32; + if (w > 0) { + memcpy(d.pixels, c, w); + memset(d.pixels+w, 0, 32-w); + c2p_32x8(d.words); + store_planar_masked(p, dst_nextplane, bpp, + d.words, last); + } + } + src += src_nextline; + dst += dst_nextline; + } +} +EXPORT_SYMBOL_GPL(c2p_planar); + +MODULE_LICENSE("GPL"); diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c index 4bcff81b50e..1657b9608b0 100644 --- a/drivers/video/console/fbcon.c +++ b/drivers/video/console/fbcon.c @@ -78,13 +78,6 @@ #include <asm/fb.h> #include <asm/irq.h> #include <asm/system.h> -#ifdef CONFIG_ATARI -#include <asm/atariints.h> -#endif -#if defined(__mc68000__) -#include <asm/machdep.h> -#include <asm/setup.h> -#endif #include "fbcon.h" @@ -155,9 +148,6 @@ static int fbcon_set_origin(struct vc_data *); #define CURSOR_DRAW_DELAY (1) -/* # VBL ints between cursor state changes */ -#define ATARI_CURSOR_BLINK_RATE (42) - static int vbl_cursor_cnt; static int fbcon_cursor_noblink; @@ -403,20 +393,6 @@ static void fb_flashcursor(struct work_struct *work) release_console_sem(); } -#ifdef CONFIG_ATARI -static int cursor_blink_rate; -static irqreturn_t fb_vbl_handler(int irq, void *dev_id) -{ - struct fb_info *info = dev_id; - - if (vbl_cursor_cnt && --vbl_cursor_cnt == 0) { - schedule_work(&info->queue); - vbl_cursor_cnt = cursor_blink_rate; - } - return IRQ_HANDLED; -} -#endif - static void cursor_timer_handler(unsigned long dev_addr) { struct fb_info *info = (struct fb_info *) dev_addr; @@ -1017,15 +993,6 @@ static const char *fbcon_startup(void) info->var.yres, info->var.bits_per_pixel); -#ifdef CONFIG_ATARI - if (MACH_IS_ATARI) { - cursor_blink_rate = ATARI_CURSOR_BLINK_RATE; - (void)request_irq(IRQ_AUTO_4, fb_vbl_handler, - IRQ_TYPE_PRIO, "framebuffer vbl", - info); - } -#endif /* CONFIG_ATARI */ - fbcon_add_cursor_timer(info); fbcon_has_exited = 0; return display_desc; @@ -3454,11 +3421,6 @@ static void fbcon_exit(void) if (fbcon_has_exited) return; -#ifdef CONFIG_ATARI - if (MACH_IS_ATARI) - free_irq(IRQ_AUTO_4, fb_vbl_handler); -#endif - kfree((void *)softback_buf); softback_buf = 0UL; diff --git a/drivers/video/fbcmap.c b/drivers/video/fbcmap.c index 91b78e69150..f53b9f1d6ab 100644 --- a/drivers/video/fbcmap.c +++ b/drivers/video/fbcmap.c @@ -250,10 +250,6 @@ int fb_set_user_cmap(struct fb_cmap_user *cmap, struct fb_info *info) int rc, size = cmap->len * sizeof(u16); struct fb_cmap umap; - if (cmap->start < 0 || (!info->fbops->fb_setcolreg && - !info->fbops->fb_setcmap)) - return -EINVAL; - memset(&umap, 0, sizeof(struct fb_cmap)); rc = fb_alloc_cmap(&umap, cmap->len, cmap->transp != NULL); if (rc) @@ -262,11 +258,23 @@ int fb_set_user_cmap(struct fb_cmap_user *cmap, struct fb_info *info) copy_from_user(umap.green, cmap->green, size) || copy_from_user(umap.blue, cmap->blue, size) || (cmap->transp && copy_from_user(umap.transp, cmap->transp, size))) { - fb_dealloc_cmap(&umap); - return -EFAULT; + rc = -EFAULT; + goto out; } umap.start = cmap->start; + if (!lock_fb_info(info)) { + rc = -ENODEV; + goto out; + } + if (cmap->start < 0 || (!info->fbops->fb_setcolreg && + !info->fbops->fb_setcmap)) { + rc = -EINVAL; + goto out1; + } rc = fb_set_cmap(&umap, info); +out1: + unlock_fb_info(info); +out: fb_dealloc_cmap(&umap); return rc; } diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c index 756efeb91ab..cfd9dce1ce0 100644 --- a/drivers/video/fbmem.c +++ b/drivers/video/fbmem.c @@ -1013,132 +1013,139 @@ static long do_fb_ioctl(struct fb_info *info, unsigned int cmd, struct fb_var_screeninfo var; struct fb_fix_screeninfo fix; struct fb_con2fbmap con2fb; + struct fb_cmap cmap_from; struct fb_cmap_user cmap; struct fb_event event; void __user *argp = (void __user *)arg; long ret = 0; - fb = info->fbops; - if (!fb) - return -ENODEV; - switch (cmd) { case FBIOGET_VSCREENINFO: - ret = copy_to_user(argp, &info->var, - sizeof(var)) ? -EFAULT : 0; + if (!lock_fb_info(info)) + return -ENODEV; + var = info->var; + unlock_fb_info(info); + + ret = copy_to_user(argp, &var, sizeof(var)) ? -EFAULT : 0; break; case FBIOPUT_VSCREENINFO: - if (copy_from_user(&var, argp, sizeof(var))) { - ret = -EFAULT; - break; - } + if (copy_from_user(&var, argp, sizeof(var))) + return -EFAULT; + if (!lock_fb_info(info)) + return -ENODEV; acquire_console_sem(); info->flags |= FBINFO_MISC_USEREVENT; ret = fb_set_var(info, &var); info->flags &= ~FBINFO_MISC_USEREVENT; release_console_sem(); - if (ret == 0 && copy_to_user(argp, &var, sizeof(var))) + unlock_fb_info(info); + if (!ret && copy_to_user(argp, &var, sizeof(var))) ret = -EFAULT; break; case FBIOGET_FSCREENINFO: - ret = copy_to_user(argp, &info->fix, - sizeof(fix)) ? -EFAULT : 0; + if (!lock_fb_info(info)) + return -ENODEV; + fix = info->fix; + unlock_fb_info(info); + + ret = copy_to_user(argp, &fix, sizeof(fix)) ? -EFAULT : 0; break; case FBIOPUTCMAP: if (copy_from_user(&cmap, argp, sizeof(cmap))) - ret = -EFAULT; - else - ret = fb_set_user_cmap(&cmap, info); + return -EFAULT; + ret = fb_set_user_cmap(&cmap, info); break; case FBIOGETCMAP: if (copy_from_user(&cmap, argp, sizeof(cmap))) - ret = -EFAULT; - else - ret = fb_cmap_to_user(&info->cmap, &cmap); + return -EFAULT; + if (!lock_fb_info(info)) + return -ENODEV; + cmap_from = info->cmap; + unlock_fb_info(info); + ret = fb_cmap_to_user(&cmap_from, &cmap); break; case FBIOPAN_DISPLAY: - if (copy_from_user(&var, argp, sizeof(var))) { - ret = -EFAULT; - break; - } + if (copy_from_user(&var, argp, sizeof(var))) + return -EFAULT; + if (!lock_fb_info(info)) + return -ENODEV; acquire_console_sem(); ret = fb_pan_display(info, &var); release_console_sem(); + unlock_fb_info(info); if (ret == 0 && copy_to_user(argp, &var, sizeof(var))) - ret = -EFAULT; + return -EFAULT; break; case FBIO_CURSOR: ret = -EINVAL; break; case FBIOGET_CON2FBMAP: if (copy_from_user(&con2fb, argp, sizeof(con2fb))) - ret = -EFAULT; - else if (con2fb.console < 1 || con2fb.console > MAX_NR_CONSOLES) - ret = -EINVAL; - else { - con2fb.framebuffer = -1; - event.info = info; - event.data = &con2fb; - fb_notifier_call_chain(FB_EVENT_GET_CONSOLE_MAP, - &event); - ret = copy_to_user(argp, &con2fb, - sizeof(con2fb)) ? -EFAULT : 0; - } + return -EFAULT; + if (con2fb.console < 1 || con2fb.console > MAX_NR_CONSOLES) + return -EINVAL; + con2fb.framebuffer = -1; + event.data = &con2fb; + + if (!lock_fb_info(info)) + return -ENODEV; + event.info = info; + fb_notifier_call_chain(FB_EVENT_GET_CONSOLE_MAP, &event); + unlock_fb_info(info); + + ret = copy_to_user(argp, &con2fb, sizeof(con2fb)) ? -EFAULT : 0; break; case FBIOPUT_CON2FBMAP: - if (copy_from_user(&con2fb, argp, sizeof(con2fb))) { - ret = -EFAULT; - break; - } - if (con2fb.console < 1 || con2fb.console > MAX_NR_CONSOLES) { - ret = -EINVAL; - break; - } - if (con2fb.framebuffer < 0 || con2fb.framebuffer >= FB_MAX) { - ret = -EINVAL; - break; - } + if (copy_from_user(&con2fb, argp, sizeof(con2fb))) + return -EFAULT; + if (con2fb.console < 1 || con2fb.console > MAX_NR_CONSOLES) + return -EINVAL; + if (con2fb.framebuffer < 0 || con2fb.framebuffer >= FB_MAX) + return -EINVAL; if (!registered_fb[con2fb.framebuffer]) request_module("fb%d", con2fb.framebuffer); if (!registered_fb[con2fb.framebuffer]) { ret = -EINVAL; break; } - event.info = info; event.data = &con2fb; + if (!lock_fb_info(info)) + return -ENODEV; + event.info = info; ret = fb_notifier_call_chain(FB_EVENT_SET_CONSOLE_MAP, &event); + unlock_fb_info(info); break; case FBIOBLANK: + if (!lock_fb_info(info)) + return -ENODEV; acquire_console_sem(); info->flags |= FBINFO_MISC_USEREVENT; ret = fb_blank(info, arg); info->flags &= ~FBINFO_MISC_USEREVENT; release_console_sem(); - break;; + unlock_fb_info(info); + break; default: - if (fb->fb_ioctl == NULL) - ret = -ENOTTY; - else + if (!lock_fb_info(info)) + return -ENODEV; + fb = info->fbops; + if (fb->fb_ioctl) ret = fb->fb_ioctl(info, cmd, arg); + else + ret = -ENOTTY; + unlock_fb_info(info); } return ret; } static long fb_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -__acquires(&info->lock) -__releases(&info->lock) { struct inode *inode = file->f_path.dentry->d_inode; int fbidx = iminor(inode); - struct fb_info *info; - long ret; + struct fb_info *info = registered_fb[fbidx]; - info = registered_fb[fbidx]; - mutex_lock(&info->lock); - ret = do_fb_ioctl(info, cmd, arg); - mutex_unlock(&info->lock); - return ret; + return do_fb_ioctl(info, cmd, arg); } #ifdef CONFIG_COMPAT @@ -1257,8 +1264,6 @@ static int fb_get_fscreeninfo(struct fb_info *info, unsigned int cmd, static long fb_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -__acquires(&info->lock) -__releases(&info->lock) { struct inode *inode = file->f_path.dentry->d_inode; int fbidx = iminor(inode); @@ -1266,7 +1271,6 @@ __releases(&info->lock) struct fb_ops *fb = info->fbops; long ret = -ENOIOCTLCMD; - mutex_lock(&info->lock); switch(cmd) { case FBIOGET_VSCREENINFO: case FBIOPUT_VSCREENINFO: @@ -1292,7 +1296,6 @@ __releases(&info->lock) ret = fb->fb_compat_ioctl(info, cmd, arg); break; } - mutex_unlock(&info->lock); return ret; } #endif diff --git a/drivers/video/geode/gx1fb_core.c b/drivers/video/geode/gx1fb_core.c index 751e491ca8c..f20eff8c4a8 100644 --- a/drivers/video/geode/gx1fb_core.c +++ b/drivers/video/geode/gx1fb_core.c @@ -136,13 +136,10 @@ static int gx1fb_set_par(struct fb_info *info) { struct geodefb_par *par = info->par; - if (info->var.bits_per_pixel == 16) { + if (info->var.bits_per_pixel == 16) info->fix.visual = FB_VISUAL_TRUECOLOR; - fb_dealloc_cmap(&info->cmap); - } else { + else info->fix.visual = FB_VISUAL_PSEUDOCOLOR; - fb_alloc_cmap(&info->cmap, 1<<info->var.bits_per_pixel, 0); - } info->fix.line_length = gx1_line_delta(info->var.xres, info->var.bits_per_pixel); @@ -315,6 +312,10 @@ static struct fb_info * __init gx1fb_init_fbinfo(struct device *dev) if (!par->panel_x) par->enable_crt = 1; /* fall back to CRT if no panel is specified */ + if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) { + framebuffer_release(info); + return NULL; + } return info; } @@ -374,8 +375,11 @@ static int __init gx1fb_probe(struct pci_dev *pdev, const struct pci_device_id * release_mem_region(gx1_gx_base() + 0x8300, 0x100); } - if (info) + if (info) { + fb_dealloc_cmap(&info->cmap); framebuffer_release(info); + } + return ret; } @@ -395,6 +399,7 @@ static void gx1fb_remove(struct pci_dev *pdev) iounmap(par->dc_regs); release_mem_region(gx1_gx_base() + 0x8300, 0x100); + fb_dealloc_cmap(&info->cmap); pci_set_drvdata(pdev, NULL); framebuffer_release(info); diff --git a/drivers/video/geode/gxfb_core.c b/drivers/video/geode/gxfb_core.c index 48411892631..2552cac39e1 100644 --- a/drivers/video/geode/gxfb_core.c +++ b/drivers/video/geode/gxfb_core.c @@ -171,13 +171,10 @@ static int gxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) static int gxfb_set_par(struct fb_info *info) { - if (info->var.bits_per_pixel > 8) { + if (info->var.bits_per_pixel > 8) info->fix.visual = FB_VISUAL_TRUECOLOR; - fb_dealloc_cmap(&info->cmap); - } else { + else info->fix.visual = FB_VISUAL_PSEUDOCOLOR; - fb_alloc_cmap(&info->cmap, 1<<info->var.bits_per_pixel, 0); - } info->fix.line_length = gx_line_delta(info->var.xres, info->var.bits_per_pixel); @@ -331,6 +328,11 @@ static struct fb_info * __init gxfb_init_fbinfo(struct device *dev) info->var.grayscale = 0; + if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) { + framebuffer_release(info); + return NULL; + } + return info; } @@ -443,8 +445,10 @@ static int __init gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *i pci_release_region(pdev, 1); } - if (info) + if (info) { + fb_dealloc_cmap(&info->cmap); framebuffer_release(info); + } return ret; } @@ -467,6 +471,7 @@ static void gxfb_remove(struct pci_dev *pdev) iounmap(par->gp_regs); pci_release_region(pdev, 1); + fb_dealloc_cmap(&info->cmap); pci_set_drvdata(pdev, NULL); framebuffer_release(info); diff --git a/drivers/video/geode/lxfb_core.c b/drivers/video/geode/lxfb_core.c index b965ecdbc60..889cbe39e58 100644 --- a/drivers/video/geode/lxfb_core.c +++ b/drivers/video/geode/lxfb_core.c @@ -278,13 +278,10 @@ static int lxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) static int lxfb_set_par(struct fb_info *info) { - if (info->var.bits_per_pixel > 8) { + if (info->var.bits_per_pixel > 8) info->fix.visual = FB_VISUAL_TRUECOLOR; - fb_dealloc_cmap(&info->cmap); - } else { + else info->fix.visual = FB_VISUAL_PSEUDOCOLOR; - fb_alloc_cmap(&info->cmap, 1<<info->var.bits_per_pixel, 0); - } info->fix.line_length = lx_get_pitch(info->var.xres, info->var.bits_per_pixel); @@ -451,6 +448,11 @@ static struct fb_info * __init lxfb_init_fbinfo(struct device *dev) info->pseudo_palette = (void *)par + sizeof(struct lxfb_par); + if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) { + framebuffer_release(info); + return NULL; + } + info->var.grayscale = 0; return info; @@ -579,8 +581,10 @@ err: pci_release_region(pdev, 3); } - if (info) + if (info) { + fb_dealloc_cmap(&info->cmap); framebuffer_release(info); + } return ret; } @@ -604,6 +608,7 @@ static void lxfb_remove(struct pci_dev *pdev) iounmap(par->vp_regs); pci_release_region(pdev, 3); + fb_dealloc_cmap(&info->cmap); pci_set_drvdata(pdev, NULL); framebuffer_release(info); } diff --git a/drivers/video/i810/i810-i2c.c b/drivers/video/i810/i810-i2c.c index 7787c3322ff..9dd55e5324a 100644 --- a/drivers/video/i810/i810-i2c.c +++ b/drivers/video/i810/i810-i2c.c @@ -90,7 +90,6 @@ static int i810_setup_i2c_bus(struct i810fb_i2c_chan *chan, const char *name) chan->adapter.owner = THIS_MODULE; chan->adapter.algo_data = &chan->algo; chan->adapter.dev.parent = &chan->par->dev->dev; - chan->adapter.id = I2C_HW_B_I810; chan->algo.setsda = i810i2c_setsda; chan->algo.setscl = i810i2c_setscl; chan->algo.getsda = i810i2c_getsda; diff --git a/drivers/video/intelfb/intelfb_i2c.c b/drivers/video/intelfb/intelfb_i2c.c index 5d896b81f4e..b3065492bb2 100644 --- a/drivers/video/intelfb/intelfb_i2c.c +++ b/drivers/video/intelfb/intelfb_i2c.c @@ -111,7 +111,6 @@ static int intelfb_setup_i2c_bus(struct intelfb_info *dinfo, "intelfb %s", name); chan->adapter.class = class; chan->adapter.owner = THIS_MODULE; - chan->adapter.id = I2C_HW_B_INTELFB; chan->adapter.algo_data = &chan->algo; chan->adapter.dev.parent = &chan->dinfo->pdev->dev; chan->algo.setsda = intelfb_gpio_setsda; diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c new file mode 100644 index 00000000000..8a75d05f433 --- /dev/null +++ b/drivers/video/mx3fb.c @@ -0,0 +1,1555 @@ +/* + * Copyright (C) 2008 + * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> + * + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/sched.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/interrupt.h> +#include <linux/slab.h> +#include <linux/fb.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/dma-mapping.h> +#include <linux/dmaengine.h> +#include <linux/console.h> +#include <linux/clk.h> +#include <linux/mutex.h> + +#include <mach/hardware.h> +#include <mach/ipu.h> +#include <mach/mx3fb.h> + +#include <asm/io.h> +#include <asm/uaccess.h> + +#define MX3FB_NAME "mx3_sdc_fb" + +#define MX3FB_REG_OFFSET 0xB4 + +/* SDC Registers */ +#define SDC_COM_CONF (0xB4 - MX3FB_REG_OFFSET) +#define SDC_GW_CTRL (0xB8 - MX3FB_REG_OFFSET) +#define SDC_FG_POS (0xBC - MX3FB_REG_OFFSET) +#define SDC_BG_POS (0xC0 - MX3FB_REG_OFFSET) +#define SDC_CUR_POS (0xC4 - MX3FB_REG_OFFSET) +#define SDC_PWM_CTRL (0xC8 - MX3FB_REG_OFFSET) +#define SDC_CUR_MAP (0xCC - MX3FB_REG_OFFSET) +#define SDC_HOR_CONF (0xD0 - MX3FB_REG_OFFSET) +#define SDC_VER_CONF (0xD4 - MX3FB_REG_OFFSET) +#define SDC_SHARP_CONF_1 (0xD8 - MX3FB_REG_OFFSET) +#define SDC_SHARP_CONF_2 (0xDC - MX3FB_REG_OFFSET) + +/* Register bits */ +#define SDC_COM_TFT_COLOR 0x00000001UL +#define SDC_COM_FG_EN 0x00000010UL +#define SDC_COM_GWSEL 0x00000020UL +#define SDC_COM_GLB_A 0x00000040UL +#define SDC_COM_KEY_COLOR_G 0x00000080UL +#define SDC_COM_BG_EN 0x00000200UL +#define SDC_COM_SHARP 0x00001000UL + +#define SDC_V_SYNC_WIDTH_L 0x00000001UL + +/* Display Interface registers */ +#define DI_DISP_IF_CONF (0x0124 - MX3FB_REG_OFFSET) +#define DI_DISP_SIG_POL (0x0128 - MX3FB_REG_OFFSET) +#define DI_SER_DISP1_CONF (0x012C - MX3FB_REG_OFFSET) +#define DI_SER_DISP2_CONF (0x0130 - MX3FB_REG_OFFSET) +#define DI_HSP_CLK_PER (0x0134 - MX3FB_REG_OFFSET) +#define DI_DISP0_TIME_CONF_1 (0x0138 - MX3FB_REG_OFFSET) +#define DI_DISP0_TIME_CONF_2 (0x013C - MX3FB_REG_OFFSET) +#define DI_DISP0_TIME_CONF_3 (0x0140 - MX3FB_REG_OFFSET) +#define DI_DISP1_TIME_CONF_1 (0x0144 - MX3FB_REG_OFFSET) +#define DI_DISP1_TIME_CONF_2 (0x0148 - MX3FB_REG_OFFSET) +#define DI_DISP1_TIME_CONF_3 (0x014C - MX3FB_REG_OFFSET) +#define DI_DISP2_TIME_CONF_1 (0x0150 - MX3FB_REG_OFFSET) +#define DI_DISP2_TIME_CONF_2 (0x0154 - MX3FB_REG_OFFSET) +#define DI_DISP2_TIME_CONF_3 (0x0158 - MX3FB_REG_OFFSET) +#define DI_DISP3_TIME_CONF (0x015C - MX3FB_REG_OFFSET) +#define DI_DISP0_DB0_MAP (0x0160 - MX3FB_REG_OFFSET) +#define DI_DISP0_DB1_MAP (0x0164 - MX3FB_REG_OFFSET) +#define DI_DISP0_DB2_MAP (0x0168 - MX3FB_REG_OFFSET) +#define DI_DISP0_CB0_MAP (0x016C - MX3FB_REG_OFFSET) +#define DI_DISP0_CB1_MAP (0x0170 - MX3FB_REG_OFFSET) +#define DI_DISP0_CB2_MAP (0x0174 - MX3FB_REG_OFFSET) +#define DI_DISP1_DB0_MAP (0x0178 - MX3FB_REG_OFFSET) +#define DI_DISP1_DB1_MAP (0x017C - MX3FB_REG_OFFSET) +#define DI_DISP1_DB2_MAP (0x0180 - MX3FB_REG_OFFSET) +#define DI_DISP1_CB0_MAP (0x0184 - MX3FB_REG_OFFSET) +#define DI_DISP1_CB1_MAP (0x0188 - MX3FB_REG_OFFSET) +#define DI_DISP1_CB2_MAP (0x018C - MX3FB_REG_OFFSET) +#define DI_DISP2_DB0_MAP (0x0190 - MX3FB_REG_OFFSET) +#define DI_DISP2_DB1_MAP (0x0194 - MX3FB_REG_OFFSET) +#define DI_DISP2_DB2_MAP (0x0198 - MX3FB_REG_OFFSET) +#define DI_DISP2_CB0_MAP (0x019C - MX3FB_REG_OFFSET) +#define DI_DISP2_CB1_MAP (0x01A0 - MX3FB_REG_OFFSET) +#define DI_DISP2_CB2_MAP (0x01A4 - MX3FB_REG_OFFSET) +#define DI_DISP3_B0_MAP (0x01A8 - MX3FB_REG_OFFSET) +#define DI_DISP3_B1_MAP (0x01AC - MX3FB_REG_OFFSET) +#define DI_DISP3_B2_MAP (0x01B0 - MX3FB_REG_OFFSET) +#define DI_DISP_ACC_CC (0x01B4 - MX3FB_REG_OFFSET) +#define DI_DISP_LLA_CONF (0x01B8 - MX3FB_REG_OFFSET) +#define DI_DISP_LLA_DATA (0x01BC - MX3FB_REG_OFFSET) + +/* DI_DISP_SIG_POL bits */ +#define DI_D3_VSYNC_POL_SHIFT 28 +#define DI_D3_HSYNC_POL_SHIFT 27 +#define DI_D3_DRDY_SHARP_POL_SHIFT 26 +#define DI_D3_CLK_POL_SHIFT 25 +#define DI_D3_DATA_POL_SHIFT 24 + +/* DI_DISP_IF_CONF bits */ +#define DI_D3_CLK_IDLE_SHIFT 26 +#define DI_D3_CLK_SEL_SHIFT 25 +#define DI_D3_DATAMSK_SHIFT 24 + +enum ipu_panel { + IPU_PANEL_SHARP_TFT, + IPU_PANEL_TFT, +}; + +struct ipu_di_signal_cfg { + unsigned datamask_en:1; + unsigned clksel_en:1; + unsigned clkidle_en:1; + unsigned data_pol:1; /* true = inverted */ + unsigned clk_pol:1; /* true = rising edge */ + unsigned enable_pol:1; + unsigned Hsync_pol:1; /* true = active high */ + unsigned Vsync_pol:1; +}; + +static const struct fb_videomode mx3fb_modedb[] = { + { + /* 240x320 @ 60 Hz */ + .name = "Sharp-QVGA", + .refresh = 60, + .xres = 240, + .yres = 320, + .pixclock = 185925, + .left_margin = 9, + .right_margin = 16, + .upper_margin = 7, + .lower_margin = 9, + .hsync_len = 1, + .vsync_len = 1, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | + FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT | + FB_SYNC_CLK_IDLE_EN, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, { + /* 240x33 @ 60 Hz */ + .name = "Sharp-CLI", + .refresh = 60, + .xres = 240, + .yres = 33, + .pixclock = 185925, + .left_margin = 9, + .right_margin = 16, + .upper_margin = 7, + .lower_margin = 9 + 287, + .hsync_len = 1, + .vsync_len = 1, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | + FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT | + FB_SYNC_CLK_IDLE_EN, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, { + /* 640x480 @ 60 Hz */ + .name = "NEC-VGA", + .refresh = 60, + .xres = 640, + .yres = 480, + .pixclock = 38255, + .left_margin = 144, + .right_margin = 0, + .upper_margin = 34, + .lower_margin = 40, + .hsync_len = 1, + .vsync_len = 1, + .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, { + /* NTSC TV output */ + .name = "TV-NTSC", + .refresh = 60, + .xres = 640, + .yres = 480, + .pixclock = 37538, + .left_margin = 38, + .right_margin = 858 - 640 - 38 - 3, + .upper_margin = 36, + .lower_margin = 518 - 480 - 36 - 1, + .hsync_len = 3, + .vsync_len = 1, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, { + /* PAL TV output */ + .name = "TV-PAL", + .refresh = 50, + .xres = 640, + .yres = 480, + .pixclock = 37538, + .left_margin = 38, + .right_margin = 960 - 640 - 38 - 32, + .upper_margin = 32, + .lower_margin = 555 - 480 - 32 - 3, + .hsync_len = 32, + .vsync_len = 3, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, { + /* TV output VGA mode, 640x480 @ 65 Hz */ + .name = "TV-VGA", + .refresh = 60, + .xres = 640, + .yres = 480, + .pixclock = 40574, + .left_margin = 35, + .right_margin = 45, + .upper_margin = 9, + .lower_margin = 1, + .hsync_len = 46, + .vsync_len = 5, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, +}; + +struct mx3fb_data { + struct fb_info *fbi; + int backlight_level; + void __iomem *reg_base; + spinlock_t lock; + struct device *dev; + + uint32_t h_start_width; + uint32_t v_start_width; +}; + +struct dma_chan_request { + struct mx3fb_data *mx3fb; + enum ipu_channel id; +}; + +/* MX3 specific framebuffer information. */ +struct mx3fb_info { + int blank; + enum ipu_channel ipu_ch; + uint32_t cur_ipu_buf; + + u32 pseudo_palette[16]; + + struct completion flip_cmpl; + struct mutex mutex; /* Protects fb-ops */ + struct mx3fb_data *mx3fb; + struct idmac_channel *idmac_channel; + struct dma_async_tx_descriptor *txd; + dma_cookie_t cookie; + struct scatterlist sg[2]; + + u32 sync; /* preserve var->sync flags */ +}; + +static void mx3fb_dma_done(void *); + +/* Used fb-mode and bpp. Can be set on kernel command line, therefore file-static. */ +static const char *fb_mode; +static unsigned long default_bpp = 16; + +static u32 mx3fb_read_reg(struct mx3fb_data *mx3fb, unsigned long reg) +{ + return __raw_readl(mx3fb->reg_base + reg); +} + +static void mx3fb_write_reg(struct mx3fb_data *mx3fb, u32 value, unsigned long reg) +{ + __raw_writel(value, mx3fb->reg_base + reg); +} + +static const uint32_t di_mappings[] = { + 0x1600AAAA, 0x00E05555, 0x00070000, 3, /* RGB888 */ + 0x0005000F, 0x000B000F, 0x0011000F, 1, /* RGB666 */ + 0x0011000F, 0x000B000F, 0x0005000F, 1, /* BGR666 */ + 0x0004003F, 0x000A000F, 0x000F003F, 1 /* RGB565 */ +}; + +static void sdc_fb_init(struct mx3fb_info *fbi) +{ + struct mx3fb_data *mx3fb = fbi->mx3fb; + uint32_t reg; + + reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF); + + mx3fb_write_reg(mx3fb, reg | SDC_COM_BG_EN, SDC_COM_CONF); +} + +/* Returns enabled flag before uninit */ +static uint32_t sdc_fb_uninit(struct mx3fb_info *fbi) +{ + struct mx3fb_data *mx3fb = fbi->mx3fb; + uint32_t reg; + + reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF); + + mx3fb_write_reg(mx3fb, reg & ~SDC_COM_BG_EN, SDC_COM_CONF); + + return reg & SDC_COM_BG_EN; +} + +static void sdc_enable_channel(struct mx3fb_info *mx3_fbi) +{ + struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; + struct idmac_channel *ichan = mx3_fbi->idmac_channel; + struct dma_chan *dma_chan = &ichan->dma_chan; + unsigned long flags; + dma_cookie_t cookie; + + dev_dbg(mx3fb->dev, "mx3fbi %p, desc %p, sg %p\n", mx3_fbi, + to_tx_desc(mx3_fbi->txd), to_tx_desc(mx3_fbi->txd)->sg); + + /* This enables the channel */ + if (mx3_fbi->cookie < 0) { + mx3_fbi->txd = dma_chan->device->device_prep_slave_sg(dma_chan, + &mx3_fbi->sg[0], 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT); + if (!mx3_fbi->txd) { + dev_err(mx3fb->dev, "Cannot allocate descriptor on %d\n", + dma_chan->chan_id); + return; + } + + mx3_fbi->txd->callback_param = mx3_fbi->txd; + mx3_fbi->txd->callback = mx3fb_dma_done; + + cookie = mx3_fbi->txd->tx_submit(mx3_fbi->txd); + dev_dbg(mx3fb->dev, "%d: Submit %p #%d [%c]\n", __LINE__, + mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+'); + } else { + if (!mx3_fbi->txd || !mx3_fbi->txd->tx_submit) { + dev_err(mx3fb->dev, "Cannot enable channel %d\n", + dma_chan->chan_id); + return; + } + + /* Just re-activate the same buffer */ + dma_async_issue_pending(dma_chan); + cookie = mx3_fbi->cookie; + dev_dbg(mx3fb->dev, "%d: Re-submit %p #%d [%c]\n", __LINE__, + mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+'); + } + + if (cookie >= 0) { + spin_lock_irqsave(&mx3fb->lock, flags); + sdc_fb_init(mx3_fbi); + mx3_fbi->cookie = cookie; + spin_unlock_irqrestore(&mx3fb->lock, flags); + } + + /* + * Attention! Without this msleep the channel keeps generating + * interrupts. Next sdc_set_brightness() is going to be called + * from mx3fb_blank(). + */ + msleep(2); +} + +static void sdc_disable_channel(struct mx3fb_info *mx3_fbi) +{ + struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; + uint32_t enabled; + unsigned long flags; + + spin_lock_irqsave(&mx3fb->lock, flags); + + enabled = sdc_fb_uninit(mx3_fbi); + + spin_unlock_irqrestore(&mx3fb->lock, flags); + + mx3_fbi->txd->chan->device->device_terminate_all(mx3_fbi->txd->chan); + mx3_fbi->txd = NULL; + mx3_fbi->cookie = -EINVAL; +} + +/** + * sdc_set_window_pos() - set window position of the respective plane. + * @mx3fb: mx3fb context. + * @channel: IPU DMAC channel ID. + * @x_pos: X coordinate relative to the top left corner to place window at. + * @y_pos: Y coordinate relative to the top left corner to place window at. + * @return: 0 on success or negative error code on failure. + */ +static int sdc_set_window_pos(struct mx3fb_data *mx3fb, enum ipu_channel channel, + int16_t x_pos, int16_t y_pos) +{ + x_pos += mx3fb->h_start_width; + y_pos += mx3fb->v_start_width; + + if (channel != IDMAC_SDC_0) + return -EINVAL; + + mx3fb_write_reg(mx3fb, (x_pos << 16) | y_pos, SDC_BG_POS); + return 0; +} + +/** + * sdc_init_panel() - initialize a synchronous LCD panel. + * @mx3fb: mx3fb context. + * @panel: panel type. + * @pixel_clk: desired pixel clock frequency in Hz. + * @width: width of panel in pixels. + * @height: height of panel in pixels. + * @pixel_fmt: pixel format of buffer as FOURCC ASCII code. + * @h_start_width: number of pixel clocks between the HSYNC signal pulse + * and the start of valid data. + * @h_sync_width: width of the HSYNC signal in units of pixel clocks. + * @h_end_width: number of pixel clocks between the end of valid data + * and the HSYNC signal for next line. + * @v_start_width: number of lines between the VSYNC signal pulse and the + * start of valid data. + * @v_sync_width: width of the VSYNC signal in units of lines + * @v_end_width: number of lines between the end of valid data and the + * VSYNC signal for next frame. + * @sig: bitfield of signal polarities for LCD interface. + * @return: 0 on success or negative error code on failure. + */ +static int sdc_init_panel(struct mx3fb_data *mx3fb, enum ipu_panel panel, + uint32_t pixel_clk, + uint16_t width, uint16_t height, + enum pixel_fmt pixel_fmt, + uint16_t h_start_width, uint16_t h_sync_width, + uint16_t h_end_width, uint16_t v_start_width, + uint16_t v_sync_width, uint16_t v_end_width, + struct ipu_di_signal_cfg sig) +{ + unsigned long lock_flags; + uint32_t reg; + uint32_t old_conf; + uint32_t div; + struct clk *ipu_clk; + + dev_dbg(mx3fb->dev, "panel size = %d x %d", width, height); + + if (v_sync_width == 0 || h_sync_width == 0) + return -EINVAL; + + /* Init panel size and blanking periods */ + reg = ((uint32_t) (h_sync_width - 1) << 26) | + ((uint32_t) (width + h_start_width + h_end_width - 1) << 16); + mx3fb_write_reg(mx3fb, reg, SDC_HOR_CONF); + +#ifdef DEBUG + printk(KERN_CONT " hor_conf %x,", reg); +#endif + + reg = ((uint32_t) (v_sync_width - 1) << 26) | SDC_V_SYNC_WIDTH_L | + ((uint32_t) (height + v_start_width + v_end_width - 1) << 16); + mx3fb_write_reg(mx3fb, reg, SDC_VER_CONF); + +#ifdef DEBUG + printk(KERN_CONT " ver_conf %x\n", reg); +#endif + + mx3fb->h_start_width = h_start_width; + mx3fb->v_start_width = v_start_width; + + switch (panel) { + case IPU_PANEL_SHARP_TFT: + mx3fb_write_reg(mx3fb, 0x00FD0102L, SDC_SHARP_CONF_1); + mx3fb_write_reg(mx3fb, 0x00F500F4L, SDC_SHARP_CONF_2); + mx3fb_write_reg(mx3fb, SDC_COM_SHARP | SDC_COM_TFT_COLOR, SDC_COM_CONF); + break; + case IPU_PANEL_TFT: + mx3fb_write_reg(mx3fb, SDC_COM_TFT_COLOR, SDC_COM_CONF); + break; + default: + return -EINVAL; + } + + /* Init clocking */ + + /* + * Calculate divider: fractional part is 4 bits so simply multiple by + * 24 to get fractional part, as long as we stay under ~250MHz and on + * i.MX31 it (HSP_CLK) is <= 178MHz. Currently 128.267MHz + */ + dev_dbg(mx3fb->dev, "pixel clk = %d\n", pixel_clk); + + ipu_clk = clk_get(mx3fb->dev, "ipu_clk"); + div = clk_get_rate(ipu_clk) * 16 / pixel_clk; + clk_put(ipu_clk); + + if (div < 0x40) { /* Divider less than 4 */ + dev_dbg(mx3fb->dev, + "InitPanel() - Pixel clock divider less than 4\n"); + div = 0x40; + } + + spin_lock_irqsave(&mx3fb->lock, lock_flags); + + /* + * DISP3_IF_CLK_DOWN_WR is half the divider value and 2 fraction bits + * fewer. Subtract 1 extra from DISP3_IF_CLK_DOWN_WR based on timing + * debug. DISP3_IF_CLK_UP_WR is 0 + */ + mx3fb_write_reg(mx3fb, (((div / 8) - 1) << 22) | div, DI_DISP3_TIME_CONF); + + /* DI settings */ + old_conf = mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF) & 0x78FFFFFF; + old_conf |= sig.datamask_en << DI_D3_DATAMSK_SHIFT | + sig.clksel_en << DI_D3_CLK_SEL_SHIFT | + sig.clkidle_en << DI_D3_CLK_IDLE_SHIFT; + mx3fb_write_reg(mx3fb, old_conf, DI_DISP_IF_CONF); + + old_conf = mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL) & 0xE0FFFFFF; + old_conf |= sig.data_pol << DI_D3_DATA_POL_SHIFT | + sig.clk_pol << DI_D3_CLK_POL_SHIFT | + sig.enable_pol << DI_D3_DRDY_SHARP_POL_SHIFT | + sig.Hsync_pol << DI_D3_HSYNC_POL_SHIFT | + sig.Vsync_pol << DI_D3_VSYNC_POL_SHIFT; + mx3fb_write_reg(mx3fb, old_conf, DI_DISP_SIG_POL); + + switch (pixel_fmt) { + case IPU_PIX_FMT_RGB24: + mx3fb_write_reg(mx3fb, di_mappings[0], DI_DISP3_B0_MAP); + mx3fb_write_reg(mx3fb, di_mappings[1], DI_DISP3_B1_MAP); + mx3fb_write_reg(mx3fb, di_mappings[2], DI_DISP3_B2_MAP); + mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) | + ((di_mappings[3] - 1) << 12), DI_DISP_ACC_CC); + break; + case IPU_PIX_FMT_RGB666: + mx3fb_write_reg(mx3fb, di_mappings[4], DI_DISP3_B0_MAP); + mx3fb_write_reg(mx3fb, di_mappings[5], DI_DISP3_B1_MAP); + mx3fb_write_reg(mx3fb, di_mappings[6], DI_DISP3_B2_MAP); + mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) | + ((di_mappings[7] - 1) << 12), DI_DISP_ACC_CC); + break; + case IPU_PIX_FMT_BGR666: + mx3fb_write_reg(mx3fb, di_mappings[8], DI_DISP3_B0_MAP); + mx3fb_write_reg(mx3fb, di_mappings[9], DI_DISP3_B1_MAP); + mx3fb_write_reg(mx3fb, di_mappings[10], DI_DISP3_B2_MAP); + mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) | + ((di_mappings[11] - 1) << 12), DI_DISP_ACC_CC); + break; + default: + mx3fb_write_reg(mx3fb, di_mappings[12], DI_DISP3_B0_MAP); + mx3fb_write_reg(mx3fb, di_mappings[13], DI_DISP3_B1_MAP); + mx3fb_write_reg(mx3fb, di_mappings[14], DI_DISP3_B2_MAP); + mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) | + ((di_mappings[15] - 1) << 12), DI_DISP_ACC_CC); + break; + } + + spin_unlock_irqrestore(&mx3fb->lock, lock_flags); + + dev_dbg(mx3fb->dev, "DI_DISP_IF_CONF = 0x%08X\n", + mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF)); + dev_dbg(mx3fb->dev, "DI_DISP_SIG_POL = 0x%08X\n", + mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL)); + dev_dbg(mx3fb->dev, "DI_DISP3_TIME_CONF = 0x%08X\n", + mx3fb_read_reg(mx3fb, DI_DISP3_TIME_CONF)); + + return 0; +} + +/** + * sdc_set_color_key() - set the transparent color key for SDC graphic plane. + * @mx3fb: mx3fb context. + * @channel: IPU DMAC channel ID. + * @enable: boolean to enable or disable color keyl. + * @color_key: 24-bit RGB color to use as transparent color key. + * @return: 0 on success or negative error code on failure. + */ +static int sdc_set_color_key(struct mx3fb_data *mx3fb, enum ipu_channel channel, + bool enable, uint32_t color_key) +{ + uint32_t reg, sdc_conf; + unsigned long lock_flags; + + spin_lock_irqsave(&mx3fb->lock, lock_flags); + + sdc_conf = mx3fb_read_reg(mx3fb, SDC_COM_CONF); + if (channel == IDMAC_SDC_0) + sdc_conf &= ~SDC_COM_GWSEL; + else + sdc_conf |= SDC_COM_GWSEL; + + if (enable) { + reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0xFF000000L; + mx3fb_write_reg(mx3fb, reg | (color_key & 0x00FFFFFFL), + SDC_GW_CTRL); + + sdc_conf |= SDC_COM_KEY_COLOR_G; + } else { + sdc_conf &= ~SDC_COM_KEY_COLOR_G; + } + mx3fb_write_reg(mx3fb, sdc_conf, SDC_COM_CONF); + + spin_unlock_irqrestore(&mx3fb->lock, lock_flags); + + return 0; +} + +/** + * sdc_set_global_alpha() - set global alpha blending modes. + * @mx3fb: mx3fb context. + * @enable: boolean to enable or disable global alpha blending. If disabled, + * per pixel blending is used. + * @alpha: global alpha value. + * @return: 0 on success or negative error code on failure. + */ +static int sdc_set_global_alpha(struct mx3fb_data *mx3fb, bool enable, uint8_t alpha) +{ + uint32_t reg; + unsigned long lock_flags; + + spin_lock_irqsave(&mx3fb->lock, lock_flags); + + if (enable) { + reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0x00FFFFFFL; + mx3fb_write_reg(mx3fb, reg | ((uint32_t) alpha << 24), SDC_GW_CTRL); + + reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF); + mx3fb_write_reg(mx3fb, reg | SDC_COM_GLB_A, SDC_COM_CONF); + } else { + reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF); + mx3fb_write_reg(mx3fb, reg & ~SDC_COM_GLB_A, SDC_COM_CONF); + } + + spin_unlock_irqrestore(&mx3fb->lock, lock_flags); + + return 0; +} + +static void sdc_set_brightness(struct mx3fb_data *mx3fb, uint8_t value) +{ + /* This might be board-specific */ + mx3fb_write_reg(mx3fb, 0x03000000UL | value << 16, SDC_PWM_CTRL); + return; +} + +static uint32_t bpp_to_pixfmt(int bpp) +{ + uint32_t pixfmt = 0; + switch (bpp) { + case 24: + pixfmt = IPU_PIX_FMT_BGR24; + break; + case 32: + pixfmt = IPU_PIX_FMT_BGR32; + break; + case 16: + pixfmt = IPU_PIX_FMT_RGB565; + break; + } + return pixfmt; +} + +static int mx3fb_blank(int blank, struct fb_info *fbi); +static int mx3fb_map_video_memory(struct fb_info *fbi); +static int mx3fb_unmap_video_memory(struct fb_info *fbi); + +/** + * mx3fb_set_fix() - set fixed framebuffer parameters from variable settings. + * @info: framebuffer information pointer + * @return: 0 on success or negative error code on failure. + */ +static int mx3fb_set_fix(struct fb_info *fbi) +{ + struct fb_fix_screeninfo *fix = &fbi->fix; + struct fb_var_screeninfo *var = &fbi->var; + + strncpy(fix->id, "DISP3 BG", 8); + + fix->line_length = var->xres_virtual * var->bits_per_pixel / 8; + + fix->type = FB_TYPE_PACKED_PIXELS; + fix->accel = FB_ACCEL_NONE; + fix->visual = FB_VISUAL_TRUECOLOR; + fix->xpanstep = 1; + fix->ypanstep = 1; + + return 0; +} + +static void mx3fb_dma_done(void *arg) +{ + struct idmac_tx_desc *tx_desc = to_tx_desc(arg); + struct dma_chan *chan = tx_desc->txd.chan; + struct idmac_channel *ichannel = to_idmac_chan(chan); + struct mx3fb_data *mx3fb = ichannel->client; + struct mx3fb_info *mx3_fbi = mx3fb->fbi->par; + + dev_dbg(mx3fb->dev, "irq %d callback\n", ichannel->eof_irq); + + /* We only need one interrupt, it will be re-enabled as needed */ + disable_irq(ichannel->eof_irq); + + complete(&mx3_fbi->flip_cmpl); +} + +/** + * mx3fb_set_par() - set framebuffer parameters and change the operating mode. + * @fbi: framebuffer information pointer. + * @return: 0 on success or negative error code on failure. + */ +static int mx3fb_set_par(struct fb_info *fbi) +{ + u32 mem_len; + struct ipu_di_signal_cfg sig_cfg; + enum ipu_panel mode = IPU_PANEL_TFT; + struct mx3fb_info *mx3_fbi = fbi->par; + struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; + struct idmac_channel *ichan = mx3_fbi->idmac_channel; + struct idmac_video_param *video = &ichan->params.video; + struct scatterlist *sg = mx3_fbi->sg; + size_t screen_size; + + dev_dbg(mx3fb->dev, "%s [%c]\n", __func__, list_empty(&ichan->queue) ? '-' : '+'); + + mutex_lock(&mx3_fbi->mutex); + + /* Total cleanup */ + if (mx3_fbi->txd) + sdc_disable_channel(mx3_fbi); + + mx3fb_set_fix(fbi); + + mem_len = fbi->var.yres_virtual * fbi->fix.line_length; + if (mem_len > fbi->fix.smem_len) { + if (fbi->fix.smem_start) + mx3fb_unmap_video_memory(fbi); + + fbi->fix.smem_len = mem_len; + if (mx3fb_map_video_memory(fbi) < 0) { + mutex_unlock(&mx3_fbi->mutex); + return -ENOMEM; + } + } + + screen_size = fbi->fix.line_length * fbi->var.yres; + + sg_init_table(&sg[0], 1); + sg_init_table(&sg[1], 1); + + sg_dma_address(&sg[0]) = fbi->fix.smem_start; + sg_set_page(&sg[0], virt_to_page(fbi->screen_base), + fbi->fix.smem_len, + offset_in_page(fbi->screen_base)); + + if (mx3_fbi->ipu_ch == IDMAC_SDC_0) { + memset(&sig_cfg, 0, sizeof(sig_cfg)); + if (fbi->var.sync & FB_SYNC_HOR_HIGH_ACT) + sig_cfg.Hsync_pol = true; + if (fbi->var.sync & FB_SYNC_VERT_HIGH_ACT) + sig_cfg.Vsync_pol = true; + if (fbi->var.sync & FB_SYNC_CLK_INVERT) + sig_cfg.clk_pol = true; + if (fbi->var.sync & FB_SYNC_DATA_INVERT) + sig_cfg.data_pol = true; + if (fbi->var.sync & FB_SYNC_OE_ACT_HIGH) + sig_cfg.enable_pol = true; + if (fbi->var.sync & FB_SYNC_CLK_IDLE_EN) + sig_cfg.clkidle_en = true; + if (fbi->var.sync & FB_SYNC_CLK_SEL_EN) + sig_cfg.clksel_en = true; + if (fbi->var.sync & FB_SYNC_SHARP_MODE) + mode = IPU_PANEL_SHARP_TFT; + + dev_dbg(fbi->device, "pixclock = %ul Hz\n", + (u32) (PICOS2KHZ(fbi->var.pixclock) * 1000UL)); + + if (sdc_init_panel(mx3fb, mode, + (PICOS2KHZ(fbi->var.pixclock)) * 1000UL, + fbi->var.xres, fbi->var.yres, + (fbi->var.sync & FB_SYNC_SWAP_RGB) ? + IPU_PIX_FMT_BGR666 : IPU_PIX_FMT_RGB666, + fbi->var.left_margin, + fbi->var.hsync_len, + fbi->var.right_margin + + fbi->var.hsync_len, + fbi->var.upper_margin, + fbi->var.vsync_len, + fbi->var.lower_margin + + fbi->var.vsync_len, sig_cfg) != 0) { + mutex_unlock(&mx3_fbi->mutex); + dev_err(fbi->device, + "mx3fb: Error initializing panel.\n"); + return -EINVAL; + } + } + + sdc_set_window_pos(mx3fb, mx3_fbi->ipu_ch, 0, 0); + + mx3_fbi->cur_ipu_buf = 0; + + video->out_pixel_fmt = bpp_to_pixfmt(fbi->var.bits_per_pixel); + video->out_width = fbi->var.xres; + video->out_height = fbi->var.yres; + video->out_stride = fbi->var.xres_virtual; + + if (mx3_fbi->blank == FB_BLANK_UNBLANK) + sdc_enable_channel(mx3_fbi); + + mutex_unlock(&mx3_fbi->mutex); + + return 0; +} + +/** + * mx3fb_check_var() - check and adjust framebuffer variable parameters. + * @var: framebuffer variable parameters + * @fbi: framebuffer information pointer + */ +static int mx3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *fbi) +{ + struct mx3fb_info *mx3_fbi = fbi->par; + u32 vtotal; + u32 htotal; + + dev_dbg(fbi->device, "%s\n", __func__); + + if (var->xres_virtual < var->xres) + var->xres_virtual = var->xres; + if (var->yres_virtual < var->yres) + var->yres_virtual = var->yres; + + if ((var->bits_per_pixel != 32) && (var->bits_per_pixel != 24) && + (var->bits_per_pixel != 16)) + var->bits_per_pixel = default_bpp; + + switch (var->bits_per_pixel) { + case 16: + var->red.length = 5; + var->red.offset = 11; + var->red.msb_right = 0; + + var->green.length = 6; + var->green.offset = 5; + var->green.msb_right = 0; + + var->blue.length = 5; + var->blue.offset = 0; + var->blue.msb_right = 0; + + var->transp.length = 0; + var->transp.offset = 0; + var->transp.msb_right = 0; + break; + case 24: + var->red.length = 8; + var->red.offset = 16; + var->red.msb_right = 0; + + var->green.length = 8; + var->green.offset = 8; + var->green.msb_right = 0; + + var->blue.length = 8; + var->blue.offset = 0; + var->blue.msb_right = 0; + + var->transp.length = 0; + var->transp.offset = 0; + var->transp.msb_right = 0; + break; + case 32: + var->red.length = 8; + var->red.offset = 16; + var->red.msb_right = 0; + + var->green.length = 8; + var->green.offset = 8; + var->green.msb_right = 0; + + var->blue.length = 8; + var->blue.offset = 0; + var->blue.msb_right = 0; + + var->transp.length = 8; + var->transp.offset = 24; + var->transp.msb_right = 0; + break; + } + + if (var->pixclock < 1000) { + htotal = var->xres + var->right_margin + var->hsync_len + + var->left_margin; + vtotal = var->yres + var->lower_margin + var->vsync_len + + var->upper_margin; + var->pixclock = (vtotal * htotal * 6UL) / 100UL; + var->pixclock = KHZ2PICOS(var->pixclock); + dev_dbg(fbi->device, "pixclock set for 60Hz refresh = %u ps\n", + var->pixclock); + } + + var->height = -1; + var->width = -1; + var->grayscale = 0; + + /* Preserve sync flags */ + var->sync |= mx3_fbi->sync; + mx3_fbi->sync |= var->sync; + + return 0; +} + +static u32 chan_to_field(unsigned int chan, struct fb_bitfield *bf) +{ + chan &= 0xffff; + chan >>= 16 - bf->length; + return chan << bf->offset; +} + +static int mx3fb_setcolreg(unsigned int regno, unsigned int red, + unsigned int green, unsigned int blue, + unsigned int trans, struct fb_info *fbi) +{ + struct mx3fb_info *mx3_fbi = fbi->par; + u32 val; + int ret = 1; + + dev_dbg(fbi->device, "%s\n", __func__); + + mutex_lock(&mx3_fbi->mutex); + /* + * If greyscale is true, then we convert the RGB value + * to greyscale no matter what visual we are using. + */ + if (fbi->var.grayscale) + red = green = blue = (19595 * red + 38470 * green + + 7471 * blue) >> 16; + switch (fbi->fix.visual) { + case FB_VISUAL_TRUECOLOR: + /* + * 16-bit True Colour. We encode the RGB value + * according to the RGB bitfield information. + */ + if (regno < 16) { + u32 *pal = fbi->pseudo_palette; + + val = chan_to_field(red, &fbi->var.red); + val |= chan_to_field(green, &fbi->var.green); + val |= chan_to_field(blue, &fbi->var.blue); + + pal[regno] = val; + + ret = 0; + } + break; + + case FB_VISUAL_STATIC_PSEUDOCOLOR: + case FB_VISUAL_PSEUDOCOLOR: + break; + } + mutex_unlock(&mx3_fbi->mutex); + + return ret; +} + +/** + * mx3fb_blank() - blank the display. + */ +static int mx3fb_blank(int blank, struct fb_info *fbi) +{ + struct mx3fb_info *mx3_fbi = fbi->par; + struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; + + dev_dbg(fbi->device, "%s\n", __func__); + + dev_dbg(fbi->device, "blank = %d\n", blank); + + if (mx3_fbi->blank == blank) + return 0; + + mutex_lock(&mx3_fbi->mutex); + mx3_fbi->blank = blank; + + switch (blank) { + case FB_BLANK_POWERDOWN: + case FB_BLANK_VSYNC_SUSPEND: + case FB_BLANK_HSYNC_SUSPEND: + case FB_BLANK_NORMAL: + sdc_disable_channel(mx3_fbi); + sdc_set_brightness(mx3fb, 0); + break; + case FB_BLANK_UNBLANK: + sdc_enable_channel(mx3_fbi); + sdc_set_brightness(mx3fb, mx3fb->backlight_level); + break; + } + mutex_unlock(&mx3_fbi->mutex); + + return 0; +} + +/** + * mx3fb_pan_display() - pan or wrap the display + * @var: variable screen buffer information. + * @info: framebuffer information pointer. + * + * We look only at xoffset, yoffset and the FB_VMODE_YWRAP flag + */ +static int mx3fb_pan_display(struct fb_var_screeninfo *var, + struct fb_info *fbi) +{ + struct mx3fb_info *mx3_fbi = fbi->par; + u32 y_bottom; + unsigned long base; + off_t offset; + dma_cookie_t cookie; + struct scatterlist *sg = mx3_fbi->sg; + struct dma_chan *dma_chan = &mx3_fbi->idmac_channel->dma_chan; + struct dma_async_tx_descriptor *txd; + int ret; + + dev_dbg(fbi->device, "%s [%c]\n", __func__, + list_empty(&mx3_fbi->idmac_channel->queue) ? '-' : '+'); + + if (var->xoffset > 0) { + dev_dbg(fbi->device, "x panning not supported\n"); + return -EINVAL; + } + + if (fbi->var.xoffset == var->xoffset && + fbi->var.yoffset == var->yoffset) + return 0; /* No change, do nothing */ + + y_bottom = var->yoffset; + + if (!(var->vmode & FB_VMODE_YWRAP)) + y_bottom += var->yres; + + if (y_bottom > fbi->var.yres_virtual) + return -EINVAL; + + mutex_lock(&mx3_fbi->mutex); + + offset = (var->yoffset * var->xres_virtual + var->xoffset) * + (var->bits_per_pixel / 8); + base = fbi->fix.smem_start + offset; + + dev_dbg(fbi->device, "Updating SDC BG buf %d address=0x%08lX\n", + mx3_fbi->cur_ipu_buf, base); + + /* + * We enable the End of Frame interrupt, which will free a tx-descriptor, + * which we will need for the next device_prep_slave_sg(). The + * IRQ-handler will disable the IRQ again. + */ + init_completion(&mx3_fbi->flip_cmpl); + enable_irq(mx3_fbi->idmac_channel->eof_irq); + + ret = wait_for_completion_timeout(&mx3_fbi->flip_cmpl, HZ / 10); + if (ret <= 0) { + mutex_unlock(&mx3_fbi->mutex); + dev_info(fbi->device, "Panning failed due to %s\n", ret < 0 ? + "user interrupt" : "timeout"); + return ret ? : -ETIMEDOUT; + } + + mx3_fbi->cur_ipu_buf = !mx3_fbi->cur_ipu_buf; + + sg_dma_address(&sg[mx3_fbi->cur_ipu_buf]) = base; + sg_set_page(&sg[mx3_fbi->cur_ipu_buf], + virt_to_page(fbi->screen_base + offset), fbi->fix.smem_len, + offset_in_page(fbi->screen_base + offset)); + + txd = dma_chan->device->device_prep_slave_sg(dma_chan, sg + + mx3_fbi->cur_ipu_buf, 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT); + if (!txd) { + dev_err(fbi->device, + "Error preparing a DMA transaction descriptor.\n"); + mutex_unlock(&mx3_fbi->mutex); + return -EIO; + } + + txd->callback_param = txd; + txd->callback = mx3fb_dma_done; + + /* + * Emulate original mx3fb behaviour: each new call to idmac_tx_submit() + * should switch to another buffer + */ + cookie = txd->tx_submit(txd); + dev_dbg(fbi->device, "%d: Submit %p #%d\n", __LINE__, txd, cookie); + if (cookie < 0) { + dev_err(fbi->device, + "Error updating SDC buf %d to address=0x%08lX\n", + mx3_fbi->cur_ipu_buf, base); + mutex_unlock(&mx3_fbi->mutex); + return -EIO; + } + + if (mx3_fbi->txd) + async_tx_ack(mx3_fbi->txd); + mx3_fbi->txd = txd; + + fbi->var.xoffset = var->xoffset; + fbi->var.yoffset = var->yoffset; + + if (var->vmode & FB_VMODE_YWRAP) + fbi->var.vmode |= FB_VMODE_YWRAP; + else + fbi->var.vmode &= ~FB_VMODE_YWRAP; + + mutex_unlock(&mx3_fbi->mutex); + + dev_dbg(fbi->device, "Update complete\n"); + + return 0; +} + +/* + * This structure contains the pointers to the control functions that are + * invoked by the core framebuffer driver to perform operations like + * blitting, rectangle filling, copy regions and cursor definition. + */ +static struct fb_ops mx3fb_ops = { + .owner = THIS_MODULE, + .fb_set_par = mx3fb_set_par, + .fb_check_var = mx3fb_check_var, + .fb_setcolreg = mx3fb_setcolreg, + .fb_pan_display = mx3fb_pan_display, + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, + .fb_blank = mx3fb_blank, +}; + +#ifdef CONFIG_PM +/* + * Power management hooks. Note that we won't be called from IRQ context, + * unlike the blank functions above, so we may sleep. + */ + +/* + * Suspends the framebuffer and blanks the screen. Power management support + */ +static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct mx3fb_data *drv_data = platform_get_drvdata(pdev); + struct mx3fb_info *mx3_fbi = drv_data->fbi->par; + + acquire_console_sem(); + fb_set_suspend(drv_data->fbi, 1); + release_console_sem(); + + if (mx3_fbi->blank == FB_BLANK_UNBLANK) { + sdc_disable_channel(mx3_fbi); + sdc_set_brightness(mx3fb, 0); + + } + return 0; +} + +/* + * Resumes the framebuffer and unblanks the screen. Power management support + */ +static int mx3fb_resume(struct platform_device *pdev) +{ + struct mx3fb_data *drv_data = platform_get_drvdata(pdev); + struct mx3fb_info *mx3_fbi = drv_data->fbi->par; + + if (mx3_fbi->blank == FB_BLANK_UNBLANK) { + sdc_enable_channel(mx3_fbi); + sdc_set_brightness(mx3fb, drv_data->backlight_level); + } + + acquire_console_sem(); + fb_set_suspend(drv_data->fbi, 0); + release_console_sem(); + + return 0; +} +#else +#define mx3fb_suspend NULL +#define mx3fb_resume NULL +#endif + +/* + * Main framebuffer functions + */ + +/** + * mx3fb_map_video_memory() - allocates the DRAM memory for the frame buffer. + * @fbi: framebuffer information pointer + * @return: Error code indicating success or failure + * + * This buffer is remapped into a non-cached, non-buffered, memory region to + * allow palette and pixel writes to occur without flushing the cache. Once this + * area is remapped, all virtual memory access to the video memory should occur + * at the new region. + */ +static int mx3fb_map_video_memory(struct fb_info *fbi) +{ + int retval = 0; + dma_addr_t addr; + + fbi->screen_base = dma_alloc_writecombine(fbi->device, + fbi->fix.smem_len, + &addr, GFP_DMA); + + if (!fbi->screen_base) { + dev_err(fbi->device, "Cannot allocate %u bytes framebuffer memory\n", + fbi->fix.smem_len); + retval = -EBUSY; + goto err0; + } + + fbi->fix.smem_start = addr; + + dev_dbg(fbi->device, "allocated fb @ p=0x%08x, v=0x%p, size=%d.\n", + (uint32_t) fbi->fix.smem_start, fbi->screen_base, fbi->fix.smem_len); + + fbi->screen_size = fbi->fix.smem_len; + + /* Clear the screen */ + memset((char *)fbi->screen_base, 0, fbi->fix.smem_len); + + return 0; + +err0: + fbi->fix.smem_len = 0; + fbi->fix.smem_start = 0; + fbi->screen_base = NULL; + return retval; +} + +/** + * mx3fb_unmap_video_memory() - de-allocate frame buffer memory. + * @fbi: framebuffer information pointer + * @return: error code indicating success or failure + */ +static int mx3fb_unmap_video_memory(struct fb_info *fbi) +{ + dma_free_writecombine(fbi->device, fbi->fix.smem_len, + fbi->screen_base, fbi->fix.smem_start); + + fbi->screen_base = 0; + fbi->fix.smem_start = 0; + fbi->fix.smem_len = 0; + return 0; +} + +/** + * mx3fb_init_fbinfo() - initialize framebuffer information object. + * @return: initialized framebuffer structure. + */ +static struct fb_info *mx3fb_init_fbinfo(struct device *dev, struct fb_ops *ops) +{ + struct fb_info *fbi; + struct mx3fb_info *mx3fbi; + int ret; + + /* Allocate sufficient memory for the fb structure */ + fbi = framebuffer_alloc(sizeof(struct mx3fb_info), dev); + if (!fbi) + return NULL; + + mx3fbi = fbi->par; + mx3fbi->cookie = -EINVAL; + mx3fbi->cur_ipu_buf = 0; + + fbi->var.activate = FB_ACTIVATE_NOW; + + fbi->fbops = ops; + fbi->flags = FBINFO_FLAG_DEFAULT; + fbi->pseudo_palette = mx3fbi->pseudo_palette; + + mutex_init(&mx3fbi->mutex); + + /* Allocate colormap */ + ret = fb_alloc_cmap(&fbi->cmap, 16, 0); + if (ret < 0) { + framebuffer_release(fbi); + return NULL; + } + + return fbi; +} + +static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan) +{ + struct device *dev = mx3fb->dev; + struct mx3fb_platform_data *mx3fb_pdata = dev->platform_data; + const char *name = mx3fb_pdata->name; + unsigned int irq; + struct fb_info *fbi; + struct mx3fb_info *mx3fbi; + const struct fb_videomode *mode; + int ret, num_modes; + + ichan->client = mx3fb; + irq = ichan->eof_irq; + + if (ichan->dma_chan.chan_id != IDMAC_SDC_0) + return -EINVAL; + + fbi = mx3fb_init_fbinfo(dev, &mx3fb_ops); + if (!fbi) + return -ENOMEM; + + if (!fb_mode) + fb_mode = name; + + if (!fb_mode) { + ret = -EINVAL; + goto emode; + } + + if (mx3fb_pdata->mode && mx3fb_pdata->num_modes) { + mode = mx3fb_pdata->mode; + num_modes = mx3fb_pdata->num_modes; + } else { + mode = mx3fb_modedb; + num_modes = ARRAY_SIZE(mx3fb_modedb); + } + + if (!fb_find_mode(&fbi->var, fbi, fb_mode, mode, + num_modes, NULL, default_bpp)) { + ret = -EBUSY; + goto emode; + } + + fb_videomode_to_modelist(mode, num_modes, &fbi->modelist); + + /* Default Y virtual size is 2x panel size */ + fbi->var.yres_virtual = fbi->var.yres * 2; + + mx3fb->fbi = fbi; + + /* set Display Interface clock period */ + mx3fb_write_reg(mx3fb, 0x00100010L, DI_HSP_CLK_PER); + /* Might need to trigger HSP clock change - see 44.3.3.8.5 */ + + sdc_set_brightness(mx3fb, 255); + sdc_set_global_alpha(mx3fb, true, 0xFF); + sdc_set_color_key(mx3fb, IDMAC_SDC_0, false, 0); + + mx3fbi = fbi->par; + mx3fbi->idmac_channel = ichan; + mx3fbi->ipu_ch = ichan->dma_chan.chan_id; + mx3fbi->mx3fb = mx3fb; + mx3fbi->blank = FB_BLANK_NORMAL; + + init_completion(&mx3fbi->flip_cmpl); + disable_irq(ichan->eof_irq); + dev_dbg(mx3fb->dev, "disabling irq %d\n", ichan->eof_irq); + ret = mx3fb_set_par(fbi); + if (ret < 0) + goto esetpar; + + mx3fb_blank(FB_BLANK_UNBLANK, fbi); + + dev_info(dev, "mx3fb: fb registered, using mode %s\n", fb_mode); + + ret = register_framebuffer(fbi); + if (ret < 0) + goto erfb; + + return 0; + +erfb: +esetpar: +emode: + fb_dealloc_cmap(&fbi->cmap); + framebuffer_release(fbi); + + return ret; +} + +static bool chan_filter(struct dma_chan *chan, void *arg) +{ + struct dma_chan_request *rq = arg; + struct device *dev; + struct mx3fb_platform_data *mx3fb_pdata; + + if (!rq) + return false; + + dev = rq->mx3fb->dev; + mx3fb_pdata = dev->platform_data; + + return rq->id == chan->chan_id && + mx3fb_pdata->dma_dev == chan->device->dev; +} + +static void release_fbi(struct fb_info *fbi) +{ + mx3fb_unmap_video_memory(fbi); + + fb_dealloc_cmap(&fbi->cmap); + + unregister_framebuffer(fbi); + framebuffer_release(fbi); +} + +static int mx3fb_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + int ret; + struct resource *sdc_reg; + struct mx3fb_data *mx3fb; + dma_cap_mask_t mask; + struct dma_chan *chan; + struct dma_chan_request rq; + + /* + * Display Interface (DI) and Synchronous Display Controller (SDC) + * registers + */ + sdc_reg = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!sdc_reg) + return -EINVAL; + + mx3fb = kzalloc(sizeof(*mx3fb), GFP_KERNEL); + if (!mx3fb) + return -ENOMEM; + + spin_lock_init(&mx3fb->lock); + + mx3fb->reg_base = ioremap(sdc_reg->start, resource_size(sdc_reg)); + if (!mx3fb->reg_base) { + ret = -ENOMEM; + goto eremap; + } + + pr_debug("Remapped %x to %x at %p\n", sdc_reg->start, sdc_reg->end, + mx3fb->reg_base); + + /* IDMAC interface */ + dmaengine_get(); + + mx3fb->dev = dev; + platform_set_drvdata(pdev, mx3fb); + + rq.mx3fb = mx3fb; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + dma_cap_set(DMA_PRIVATE, mask); + rq.id = IDMAC_SDC_0; + chan = dma_request_channel(mask, chan_filter, &rq); + if (!chan) { + ret = -EBUSY; + goto ersdc0; + } + + ret = init_fb_chan(mx3fb, to_idmac_chan(chan)); + if (ret < 0) + goto eisdc0; + + mx3fb->backlight_level = 255; + + return 0; + +eisdc0: + dma_release_channel(chan); +ersdc0: + dmaengine_put(); + iounmap(mx3fb->reg_base); +eremap: + kfree(mx3fb); + dev_err(dev, "mx3fb: failed to register fb\n"); + return ret; +} + +static int mx3fb_remove(struct platform_device *dev) +{ + struct mx3fb_data *mx3fb = platform_get_drvdata(dev); + struct fb_info *fbi = mx3fb->fbi; + struct mx3fb_info *mx3_fbi = fbi->par; + struct dma_chan *chan; + + chan = &mx3_fbi->idmac_channel->dma_chan; + release_fbi(fbi); + + dma_release_channel(chan); + dmaengine_put(); + + iounmap(mx3fb->reg_base); + kfree(mx3fb); + return 0; +} + +static struct platform_driver mx3fb_driver = { + .driver = { + .name = MX3FB_NAME, + }, + .probe = mx3fb_probe, + .remove = mx3fb_remove, + .suspend = mx3fb_suspend, + .resume = mx3fb_resume, +}; + +/* + * Parse user specified options (`video=mx3fb:') + * example: + * video=mx3fb:bpp=16 + */ +static int mx3fb_setup(void) +{ +#ifndef MODULE + char *opt, *options = NULL; + + if (fb_get_options("mx3fb", &options)) + return -ENODEV; + + if (!options || !*options) + return 0; + + while ((opt = strsep(&options, ",")) != NULL) { + if (!*opt) + continue; + if (!strncmp(opt, "bpp=", 4)) + default_bpp = simple_strtoul(opt + 4, NULL, 0); + else + fb_mode = opt; + } +#endif + + return 0; +} + +static int __init mx3fb_init(void) +{ + int ret = mx3fb_setup(); + + if (ret < 0) + return ret; + + ret = platform_driver_register(&mx3fb_driver); + return ret; +} + +static void __exit mx3fb_exit(void) +{ + platform_driver_unregister(&mx3fb_driver); +} + +module_init(mx3fb_init); +module_exit(mx3fb_exit); + +MODULE_AUTHOR("Freescale Semiconductor, Inc."); +MODULE_DESCRIPTION("MX3 framebuffer driver"); +MODULE_ALIAS("platform:" MX3FB_NAME); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/video/nvidia/nv_i2c.c b/drivers/video/nvidia/nv_i2c.c index 6fd7cb8f9b8..6aaddb4f678 100644 --- a/drivers/video/nvidia/nv_i2c.c +++ b/drivers/video/nvidia/nv_i2c.c @@ -87,7 +87,6 @@ static int nvidia_setup_i2c_bus(struct nvidia_i2c_chan *chan, const char *name, strcpy(chan->adapter.name, name); chan->adapter.owner = THIS_MODULE; - chan->adapter.id = I2C_HW_B_NVIDIA; chan->adapter.class = i2c_class; chan->adapter.algo_data = &chan->algo; chan->adapter.dev.parent = &chan->par->pci_dev->dev; diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c index 6e2ea751876..ab394925667 100644 --- a/drivers/video/omap/lcdc.c +++ b/drivers/video/omap/lcdc.c @@ -800,14 +800,14 @@ static int omap_lcdc_init(struct omapfb_device *fbdev, int ext_mode, /* FIXME: * According to errata some platforms have a clock rate limitiation */ - lcdc.lcd_ck = clk_get(NULL, "lcd_ck"); + lcdc.lcd_ck = clk_get(fbdev->dev, "lcd_ck"); if (IS_ERR(lcdc.lcd_ck)) { dev_err(fbdev->dev, "unable to access LCD clock\n"); r = PTR_ERR(lcdc.lcd_ck); goto fail0; } - tc_ck = clk_get(NULL, "tc_ck"); + tc_ck = clk_get(fbdev->dev, "tc_ck"); if (IS_ERR(tc_ck)) { dev_err(fbdev->dev, "unable to access TC clock\n"); r = PTR_ERR(tc_ck); diff --git a/drivers/video/ps3fb.c b/drivers/video/ps3fb.c index 38ac805db97..87f826e4c95 100644 --- a/drivers/video/ps3fb.c +++ b/drivers/video/ps3fb.c @@ -1006,7 +1006,7 @@ static int ps3fb_xdr_settings(u64 xdr_lpar, struct device *dev) __func__, status); return -ENXIO; } - dev_dbg(dev, "video:%p ioif:%lx lpar:%lx size:%lx\n", + dev_dbg(dev, "video:%p ioif:%lx lpar:%llx size:%lx\n", ps3fb_videomemory.address, GPU_IOIF, xdr_lpar, ps3fb_videomemory.size); @@ -1133,7 +1133,7 @@ static int __devinit ps3fb_probe(struct ps3_system_bus_device *dev) __func__, status); goto err; } - dev_dbg(&dev->core, "ddr:lpar:0x%lx\n", ddr_lpar); + dev_dbg(&dev->core, "ddr:lpar:0x%llx\n", ddr_lpar); status = lv1_gpu_context_allocate(ps3fb.memory_handle, 0, &ps3fb.context_handle, diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index 48ff701d3a7..2552b9f325e 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -2230,7 +2230,7 @@ static int __devexit pxafb_remove(struct platform_device *dev) static struct platform_driver pxafb_driver = { .probe = pxafb_probe, - .remove = pxafb_remove, + .remove = __devexit_p(pxafb_remove), .suspend = pxafb_suspend, .resume = pxafb_resume, .driver = { diff --git a/drivers/video/savage/savagefb-i2c.c b/drivers/video/savage/savagefb-i2c.c index 783d4adffb9..574b29e9f8f 100644 --- a/drivers/video/savage/savagefb-i2c.c +++ b/drivers/video/savage/savagefb-i2c.c @@ -137,7 +137,6 @@ static int savage_setup_i2c_bus(struct savagefb_i2c_chan *chan, if (chan->par) { strcpy(chan->adapter.name, name); chan->adapter.owner = THIS_MODULE; - chan->adapter.id = I2C_HW_B_SAVAGE; chan->adapter.algo_data = &chan->algo; chan->adapter.dev.parent = &chan->par->pcidev->dev; chan->algo.udelay = 10; |