summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/cpufreq/Kconfig.powerpc26
-rw-r--r--drivers/cpufreq/Makefile3
-rw-r--r--drivers/cpufreq/pasemi-cpufreq.c331
-rw-r--r--drivers/cpufreq/pmac32-cpufreq.c721
-rw-r--r--drivers/cpufreq/pmac64-cpufreq.c746
5 files changed, 1827 insertions, 0 deletions
diff --git a/drivers/cpufreq/Kconfig.powerpc b/drivers/cpufreq/Kconfig.powerpc
index 88f629e5a39..c48f83c93a9 100644
--- a/drivers/cpufreq/Kconfig.powerpc
+++ b/drivers/cpufreq/Kconfig.powerpc
@@ -33,3 +33,29 @@ config PPC_CORENET_CPUFREQ
This adds the CPUFreq driver support for Freescale e500mc,
e5500 and e6500 series SoCs which are capable of changing
the CPU's frequency dynamically.
+
+config CPU_FREQ_PMAC
+ bool "Support for Apple PowerBooks"
+ depends on ADB_PMU && PPC32
+ select CPU_FREQ_TABLE
+ help
+ This adds support for frequency switching on Apple PowerBooks,
+ this currently includes some models of iBook & Titanium
+ PowerBook.
+
+config CPU_FREQ_PMAC64
+ bool "Support for some Apple G5s"
+ depends on PPC_PMAC && PPC64
+ select CPU_FREQ_TABLE
+ help
+ This adds support for frequency switching on Apple iMac G5,
+ and some of the more recent desktop G5 machines as well.
+
+config PPC_PASEMI_CPUFREQ
+ bool "Support for PA Semi PWRficient"
+ depends on PPC_PASEMI
+ select CPU_FREQ_TABLE
+ default y
+ help
+ This adds the support for frequency switching on PA Semi
+ PWRficient processors.
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index c956094ccc3..2de2af2ca3b 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -80,6 +80,9 @@ ppc-cbe-cpufreq-y += ppc_cbe_cpufreq_pervasive.o ppc_cbe_cpufreq.o
obj-$(CONFIG_CPU_FREQ_CBE_PMI) += ppc_cbe_cpufreq_pmi.o
obj-$(CONFIG_CPU_FREQ_MAPLE) += maple-cpufreq.o
obj-$(CONFIG_PPC_CORENET_CPUFREQ) += ppc-corenet-cpufreq.o
+obj-$(CONFIG_CPU_FREQ_PMAC) += pmac32-cpufreq.o
+obj-$(CONFIG_CPU_FREQ_PMAC64) += pmac64-cpufreq.o
+obj-$(CONFIG_PPC_PASEMI_CPUFREQ) += pasemi-cpufreq.o
##################################################################################
# Other platform drivers
diff --git a/drivers/cpufreq/pasemi-cpufreq.c b/drivers/cpufreq/pasemi-cpufreq.c
new file mode 100644
index 00000000000..b704da40406
--- /dev/null
+++ b/drivers/cpufreq/pasemi-cpufreq.c
@@ -0,0 +1,331 @@
+/*
+ * Copyright (C) 2007 PA Semi, Inc
+ *
+ * Authors: Egor Martovetsky <egor@pasemi.com>
+ * Olof Johansson <olof@lixom.net>
+ *
+ * Maintained by: Olof Johansson <olof@lixom.net>
+ *
+ * Based on arch/powerpc/platforms/cell/cbe_cpufreq.c:
+ * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/cpufreq.h>
+#include <linux/timer.h>
+#include <linux/module.h>
+
+#include <asm/hw_irq.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/time.h>
+#include <asm/smp.h>
+
+#define SDCASR_REG 0x0100
+#define SDCASR_REG_STRIDE 0x1000
+#define SDCPWR_CFGA0_REG 0x0100
+#define SDCPWR_PWST0_REG 0x0000
+#define SDCPWR_GIZTIME_REG 0x0440
+
+/* SDCPWR_GIZTIME_REG fields */
+#define SDCPWR_GIZTIME_GR 0x80000000
+#define SDCPWR_GIZTIME_LONGLOCK 0x000000ff
+
+/* Offset of ASR registers from SDC base */
+#define SDCASR_OFFSET 0x120000
+
+static void __iomem *sdcpwr_mapbase;
+static void __iomem *sdcasr_mapbase;
+
+static DEFINE_MUTEX(pas_switch_mutex);
+
+/* Current astate, is used when waking up from power savings on
+ * one core, in case the other core has switched states during
+ * the idle time.
+ */
+static int current_astate;
+
+/* We support 5(A0-A4) power states excluding turbo(A5-A6) modes */
+static struct cpufreq_frequency_table pas_freqs[] = {
+ {0, 0},
+ {1, 0},
+ {2, 0},
+ {3, 0},
+ {4, 0},
+ {0, CPUFREQ_TABLE_END},
+};
+
+static struct freq_attr *pas_cpu_freqs_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
+/*
+ * hardware specific functions
+ */
+
+static int get_astate_freq(int astate)
+{
+ u32 ret;
+ ret = in_le32(sdcpwr_mapbase + SDCPWR_CFGA0_REG + (astate * 0x10));
+
+ return ret & 0x3f;
+}
+
+static int get_cur_astate(int cpu)
+{
+ u32 ret;
+
+ ret = in_le32(sdcpwr_mapbase + SDCPWR_PWST0_REG);
+ ret = (ret >> (cpu * 4)) & 0x7;
+
+ return ret;
+}
+
+static int get_gizmo_latency(void)
+{
+ u32 giztime, ret;
+
+ giztime = in_le32(sdcpwr_mapbase + SDCPWR_GIZTIME_REG);
+
+ /* just provide the upper bound */
+ if (giztime & SDCPWR_GIZTIME_GR)
+ ret = (giztime & SDCPWR_GIZTIME_LONGLOCK) * 128000;
+ else
+ ret = (giztime & SDCPWR_GIZTIME_LONGLOCK) * 1000;
+
+ return ret;
+}
+
+static void set_astate(int cpu, unsigned int astate)
+{
+ unsigned long flags;
+
+ /* Return if called before init has run */
+ if (unlikely(!sdcasr_mapbase))
+ return;
+
+ local_irq_save(flags);
+
+ out_le32(sdcasr_mapbase + SDCASR_REG + SDCASR_REG_STRIDE*cpu, astate);
+
+ local_irq_restore(flags);
+}
+
+int check_astate(void)
+{
+ return get_cur_astate(hard_smp_processor_id());
+}
+
+void restore_astate(int cpu)
+{
+ set_astate(cpu, current_astate);
+}
+
+/*
+ * cpufreq functions
+ */
+
+static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+ const u32 *max_freqp;
+ u32 max_freq;
+ int i, cur_astate;
+ struct resource res;
+ struct device_node *cpu, *dn;
+ int err = -ENODEV;
+
+ cpu = of_get_cpu_node(policy->cpu, NULL);
+
+ if (!cpu)
+ goto out;
+
+ dn = of_find_compatible_node(NULL, NULL, "1682m-sdc");
+ if (!dn)
+ dn = of_find_compatible_node(NULL, NULL,
+ "pasemi,pwrficient-sdc");
+ if (!dn)
+ goto out;
+ err = of_address_to_resource(dn, 0, &res);
+ of_node_put(dn);
+ if (err)
+ goto out;
+ sdcasr_mapbase = ioremap(res.start + SDCASR_OFFSET, 0x2000);
+ if (!sdcasr_mapbase) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ dn = of_find_compatible_node(NULL, NULL, "1682m-gizmo");
+ if (!dn)
+ dn = of_find_compatible_node(NULL, NULL,
+ "pasemi,pwrficient-gizmo");
+ if (!dn) {
+ err = -ENODEV;
+ goto out_unmap_sdcasr;
+ }
+ err = of_address_to_resource(dn, 0, &res);
+ of_node_put(dn);
+ if (err)
+ goto out_unmap_sdcasr;
+ sdcpwr_mapbase = ioremap(res.start, 0x1000);
+ if (!sdcpwr_mapbase) {
+ err = -EINVAL;
+ goto out_unmap_sdcasr;
+ }
+
+ pr_debug("init cpufreq on CPU %d\n", policy->cpu);
+
+ max_freqp = of_get_property(cpu, "clock-frequency", NULL);
+ if (!max_freqp) {
+ err = -EINVAL;
+ goto out_unmap_sdcpwr;
+ }
+
+ /* we need the freq in kHz */
+ max_freq = *max_freqp / 1000;
+
+ pr_debug("max clock-frequency is at %u kHz\n", max_freq);
+ pr_debug("initializing frequency table\n");
+
+ /* initialize frequency table */
+ for (i=0; pas_freqs[i].frequency!=CPUFREQ_TABLE_END; i++) {
+ pas_freqs[i].frequency =
+ get_astate_freq(pas_freqs[i].driver_data) * 100000;
+ pr_debug("%d: %d\n", i, pas_freqs[i].frequency);
+ }
+
+ policy->cpuinfo.transition_latency = get_gizmo_latency();
+
+ cur_astate = get_cur_astate(policy->cpu);
+ pr_debug("current astate is at %d\n",cur_astate);
+
+ policy->cur = pas_freqs[cur_astate].frequency;
+ cpumask_copy(policy->cpus, cpu_online_mask);
+
+ ppc_proc_freq = policy->cur * 1000ul;
+
+ cpufreq_frequency_table_get_attr(pas_freqs, policy->cpu);
+
+ /* this ensures that policy->cpuinfo_min and policy->cpuinfo_max
+ * are set correctly
+ */
+ return cpufreq_frequency_table_cpuinfo(policy, pas_freqs);
+
+out_unmap_sdcpwr:
+ iounmap(sdcpwr_mapbase);
+
+out_unmap_sdcasr:
+ iounmap(sdcasr_mapbase);
+out:
+ return err;
+}
+
+static int pas_cpufreq_cpu_exit(struct cpufreq_policy *policy)
+{
+ /*
+ * We don't support CPU hotplug. Don't unmap after the system
+ * has already made it to a running state.
+ */
+ if (system_state != SYSTEM_BOOTING)
+ return 0;
+
+ if (sdcasr_mapbase)
+ iounmap(sdcasr_mapbase);
+ if (sdcpwr_mapbase)
+ iounmap(sdcpwr_mapbase);
+
+ cpufreq_frequency_table_put_attr(policy->cpu);
+ return 0;
+}
+
+static int pas_cpufreq_verify(struct cpufreq_policy *policy)
+{
+ return cpufreq_frequency_table_verify(policy, pas_freqs);
+}
+
+static int pas_cpufreq_target(struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ struct cpufreq_freqs freqs;
+ int pas_astate_new;
+ int i;
+
+ cpufreq_frequency_table_target(policy,
+ pas_freqs,
+ target_freq,
+ relation,
+ &pas_astate_new);
+
+ freqs.old = policy->cur;
+ freqs.new = pas_freqs[pas_astate_new].frequency;
+
+ mutex_lock(&pas_switch_mutex);
+ cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
+
+ pr_debug("setting frequency for cpu %d to %d kHz, 1/%d of max frequency\n",
+ policy->cpu,
+ pas_freqs[pas_astate_new].frequency,
+ pas_freqs[pas_astate_new].driver_data);
+
+ current_astate = pas_astate_new;
+
+ for_each_online_cpu(i)
+ set_astate(i, pas_astate_new);
+
+ cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
+ mutex_unlock(&pas_switch_mutex);
+
+ ppc_proc_freq = freqs.new * 1000ul;
+ return 0;
+}
+
+static struct cpufreq_driver pas_cpufreq_driver = {
+ .name = "pas-cpufreq",
+ .owner = THIS_MODULE,
+ .flags = CPUFREQ_CONST_LOOPS,
+ .init = pas_cpufreq_cpu_init,
+ .exit = pas_cpufreq_cpu_exit,
+ .verify = pas_cpufreq_verify,
+ .target = pas_cpufreq_target,
+ .attr = pas_cpu_freqs_attr,
+};
+
+/*
+ * module init and destoy
+ */
+
+static int __init pas_cpufreq_init(void)
+{
+ if (!of_machine_is_compatible("PA6T-1682M") &&
+ !of_machine_is_compatible("pasemi,pwrficient"))
+ return -ENODEV;
+
+ return cpufreq_register_driver(&pas_cpufreq_driver);
+}
+
+static void __exit pas_cpufreq_exit(void)
+{
+ cpufreq_unregister_driver(&pas_cpufreq_driver);
+}
+
+module_init(pas_cpufreq_init);
+module_exit(pas_cpufreq_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Egor Martovetsky <egor@pasemi.com>, Olof Johansson <olof@lixom.net>");
diff --git a/drivers/cpufreq/pmac32-cpufreq.c b/drivers/cpufreq/pmac32-cpufreq.c
new file mode 100644
index 00000000000..3104fad8248
--- /dev/null
+++ b/drivers/cpufreq/pmac32-cpufreq.c
@@ -0,0 +1,721 @@
+/*
+ * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ * Copyright (C) 2004 John Steele Scott <toojays@toojays.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * TODO: Need a big cleanup here. Basically, we need to have different
+ * cpufreq_driver structures for the different type of HW instead of the
+ * current mess. We also need to better deal with the detection of the
+ * type of machine.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/adb.h>
+#include <linux/pmu.h>
+#include <linux/cpufreq.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/hardirq.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/irq.h>
+#include <asm/pmac_feature.h>
+#include <asm/mmu_context.h>
+#include <asm/sections.h>
+#include <asm/cputable.h>
+#include <asm/time.h>
+#include <asm/mpic.h>
+#include <asm/keylargo.h>
+#include <asm/switch_to.h>
+
+/* WARNING !!! This will cause calibrate_delay() to be called,
+ * but this is an __init function ! So you MUST go edit
+ * init/main.c to make it non-init before enabling DEBUG_FREQ
+ */
+#undef DEBUG_FREQ
+
+extern void low_choose_7447a_dfs(int dfs);
+extern void low_choose_750fx_pll(int pll);
+extern void low_sleep_handler(void);
+
+/*
+ * Currently, PowerMac cpufreq supports only high & low frequencies
+ * that are set by the firmware
+ */
+static unsigned int low_freq;
+static unsigned int hi_freq;
+static unsigned int cur_freq;
+static unsigned int sleep_freq;
+static unsigned long transition_latency;
+
+/*
+ * Different models uses different mechanisms to switch the frequency
+ */
+static int (*set_speed_proc)(int low_speed);
+static unsigned int (*get_speed_proc)(void);
+
+/*
+ * Some definitions used by the various speedprocs
+ */
+static u32 voltage_gpio;
+static u32 frequency_gpio;
+static u32 slew_done_gpio;
+static int no_schedule;
+static int has_cpu_l2lve;
+static int is_pmu_based;
+
+/* There are only two frequency states for each processor. Values
+ * are in kHz for the time being.
+ */
+#define CPUFREQ_HIGH 0
+#define CPUFREQ_LOW 1
+
+static struct cpufreq_frequency_table pmac_cpu_freqs[] = {
+ {CPUFREQ_HIGH, 0},
+ {CPUFREQ_LOW, 0},
+ {0, CPUFREQ_TABLE_END},
+};
+
+static struct freq_attr* pmac_cpu_freqs_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
+static inline void local_delay(unsigned long ms)
+{
+ if (no_schedule)
+ mdelay(ms);
+ else
+ msleep(ms);
+}
+
+#ifdef DEBUG_FREQ
+static inline void debug_calc_bogomips(void)
+{
+ /* This will cause a recalc of bogomips and display the
+ * result. We backup/restore the value to avoid affecting the
+ * core cpufreq framework's own calculation.
+ */
+ unsigned long save_lpj = loops_per_jiffy;
+ calibrate_delay();
+ loops_per_jiffy = save_lpj;
+}
+#endif /* DEBUG_FREQ */
+
+/* Switch CPU speed under 750FX CPU control
+ */
+static int cpu_750fx_cpu_speed(int low_speed)
+{
+ u32 hid2;
+
+ if (low_speed == 0) {
+ /* ramping up, set voltage first */
+ pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05);
+ /* Make sure we sleep for at least 1ms */
+ local_delay(10);
+
+ /* tweak L2 for high voltage */
+ if (has_cpu_l2lve) {
+ hid2 = mfspr(SPRN_HID2);
+ hid2 &= ~0x2000;
+ mtspr(SPRN_HID2, hid2);
+ }
+ }
+#ifdef CONFIG_6xx
+ low_choose_750fx_pll(low_speed);
+#endif
+ if (low_speed == 1) {
+ /* tweak L2 for low voltage */
+ if (has_cpu_l2lve) {
+ hid2 = mfspr(SPRN_HID2);
+ hid2 |= 0x2000;
+ mtspr(SPRN_HID2, hid2);
+ }
+
+ /* ramping down, set voltage last */
+ pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04);
+ local_delay(10);
+ }
+
+ return 0;
+}
+
+static unsigned int cpu_750fx_get_cpu_speed(void)
+{
+ if (mfspr(SPRN_HID1) & HID1_PS)
+ return low_freq;
+ else
+ return hi_freq;
+}
+
+/* Switch CPU speed using DFS */
+static int dfs_set_cpu_speed(int low_speed)
+{
+ if (low_speed == 0) {
+ /* ramping up, set voltage first */
+ pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05);
+ /* Make sure we sleep for at least 1ms */
+ local_delay(1);
+ }
+
+ /* set frequency */
+#ifdef CONFIG_6xx
+ low_choose_7447a_dfs(low_speed);
+#endif
+ udelay(100);
+
+ if (low_speed == 1) {
+ /* ramping down, set voltage last */
+ pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04);
+ local_delay(1);
+ }
+
+ return 0;
+}
+
+static unsigned int dfs_get_cpu_speed(void)
+{
+ if (mfspr(SPRN_HID1) & HID1_DFS)
+ return low_freq;
+ else
+ return hi_freq;
+}
+
+
+/* Switch CPU speed using slewing GPIOs
+ */
+static int gpios_set_cpu_speed(int low_speed)
+{
+ int gpio, timeout = 0;
+
+ /* If ramping up, set voltage first */
+ if (low_speed == 0) {
+ pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05);
+ /* Delay is way too big but it's ok, we schedule */
+ local_delay(10);
+ }
+
+ /* Set frequency */
+ gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0);
+ if (low_speed == ((gpio & 0x01) == 0))
+ goto skip;
+
+ pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, frequency_gpio,
+ low_speed ? 0x04 : 0x05);
+ udelay(200);
+ do {
+ if (++timeout > 100)
+ break;
+ local_delay(1);
+ gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, slew_done_gpio, 0);
+ } while((gpio & 0x02) == 0);
+ skip:
+ /* If ramping down, set voltage last */
+ if (low_speed == 1) {
+ pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04);
+ /* Delay is way too big but it's ok, we schedule */
+ local_delay(10);
+ }
+
+#ifdef DEBUG_FREQ
+ debug_calc_bogomips();
+#endif
+
+ return 0;
+}
+
+/* Switch CPU speed under PMU control
+ */
+static int pmu_set_cpu_speed(int low_speed)
+{
+ struct adb_request req;
+ unsigned long save_l2cr;
+ unsigned long save_l3cr;
+ unsigned int pic_prio;
+ unsigned long flags;
+
+ preempt_disable();
+
+#ifdef DEBUG_FREQ
+ printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1));
+#endif
+ pmu_suspend();
+
+ /* Disable all interrupt sources on openpic */
+ pic_prio = mpic_cpu_get_priority();
+ mpic_cpu_set_priority(0xf);
+
+ /* Make sure the decrementer won't interrupt us */
+ asm volatile("mtdec %0" : : "r" (0x7fffffff));
+ /* Make sure any pending DEC interrupt occurring while we did
+ * the above didn't re-enable the DEC */
+ mb();
+ asm volatile("mtdec %0" : : "r" (0x7fffffff));
+
+ /* We can now disable MSR_EE */
+ local_irq_save(flags);
+
+ /* Giveup the FPU & vec */
+ enable_kernel_fp();
+
+#ifdef CONFIG_ALTIVEC
+ if (cpu_has_feature(CPU_FTR_ALTIVEC))
+ enable_kernel_altivec();
+#endif /* CONFIG_ALTIVEC */
+
+ /* Save & disable L2 and L3 caches */
+ save_l3cr = _get_L3CR(); /* (returns -1 if not available) */
+ save_l2cr = _get_L2CR(); /* (returns -1 if not available) */
+
+ /* Send the new speed command. My assumption is that this command
+ * will cause PLL_CFG[0..3] to be changed next time CPU goes to sleep
+ */
+ pmu_request(&req, NULL, 6, PMU_CPU_SPEED, 'W', 'O', 'O', 'F', low_speed);
+ while (!req.complete)
+ pmu_poll();
+
+ /* Prepare the northbridge for the speed transition */
+ pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,1);
+
+ /* Call low level code to backup CPU state and recover from
+ * hardware reset
+ */
+ low_sleep_handler();
+
+ /* Restore the northbridge */
+ pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,0);
+
+ /* Restore L2 cache */
+ if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0)
+ _set_L2CR(save_l2cr);
+ /* Restore L3 cache */
+ if (save_l3cr != 0xffffffff && (save_l3cr & L3CR_L3E) != 0)
+ _set_L3CR(save_l3cr);
+
+ /* Restore userland MMU context */
+ switch_mmu_context(NULL, current->active_mm);
+
+#ifdef DEBUG_FREQ
+ printk(KERN_DEBUG "HID1, after: %x\n", mfspr(SPRN_HID1));
+#endif
+
+ /* Restore low level PMU operations */
+ pmu_unlock();
+
+ /*
+ * Restore decrementer; we'll take a decrementer interrupt
+ * as soon as interrupts are re-enabled and the generic
+ * clockevents code will reprogram it with the right value.
+ */
+ set_dec(1);
+
+ /* Restore interrupts */
+ mpic_cpu_set_priority(pic_prio);
+
+ /* Let interrupts flow again ... */
+ local_irq_restore(flags);
+
+#ifdef DEBUG_FREQ
+ debug_calc_bogomips();
+#endif
+
+ pmu_resume();
+
+ preempt_enable();
+
+ return 0;
+}
+
+static int do_set_cpu_speed(struct cpufreq_policy *policy, int speed_mode,
+ int notify)
+{
+ struct cpufreq_freqs freqs;
+ unsigned long l3cr;
+ static unsigned long prev_l3cr;
+
+ freqs.old = cur_freq;
+ freqs.new = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq;
+
+ if (freqs.old == freqs.new)
+ return 0;
+
+ if (notify)
+ cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
+ if (speed_mode == CPUFREQ_LOW &&
+ cpu_has_feature(CPU_FTR_L3CR)) {
+ l3cr = _get_L3CR();
+ if (l3cr & L3CR_L3E) {
+ prev_l3cr = l3cr;
+ _set_L3CR(0);
+ }
+ }
+ set_speed_proc(speed_mode == CPUFREQ_LOW);
+ if (speed_mode == CPUFREQ_HIGH &&
+ cpu_has_feature(CPU_FTR_L3CR)) {
+ l3cr = _get_L3CR();
+ if ((prev_l3cr & L3CR_L3E) && l3cr != prev_l3cr)
+ _set_L3CR(prev_l3cr);
+ }
+ if (notify)
+ cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
+ cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq;
+
+ return 0;
+}
+
+static unsigned int pmac_cpufreq_get_speed(unsigned int cpu)
+{
+ return cur_freq;
+}
+
+static int pmac_cpufreq_verify(struct cpufreq_policy *policy)
+{
+ return cpufreq_frequency_table_verify(policy, pmac_cpu_freqs);
+}
+
+static int pmac_cpufreq_target( struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ unsigned int newstate = 0;
+ int rc;
+
+ if (cpufreq_frequency_table_target(policy, pmac_cpu_freqs,
+ target_freq, relation, &newstate))
+ return -EINVAL;
+
+ rc = do_set_cpu_speed(policy, newstate, 1);
+
+ ppc_proc_freq = cur_freq * 1000ul;
+ return rc;
+}
+
+static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+ if (policy->cpu != 0)
+ return -ENODEV;
+
+ policy->cpuinfo.transition_latency = transition_latency;
+ policy->cur = cur_freq;
+
+ cpufreq_frequency_table_get_attr(pmac_cpu_freqs, policy->cpu);
+ return cpufreq_frequency_table_cpuinfo(policy, pmac_cpu_freqs);
+}
+
+static u32 read_gpio(struct device_node *np)
+{
+ const u32 *reg = of_get_property(np, "reg", NULL);
+ u32 offset;
+
+ if (reg == NULL)
+ return 0;
+ /* That works for all keylargos but shall be fixed properly
+ * some day... The problem is that it seems we can't rely
+ * on the "reg" property of the GPIO nodes, they are either
+ * relative to the base of KeyLargo or to the base of the
+ * GPIO space, and the device-tree doesn't help.
+ */
+ offset = *reg;
+ if (offset < KEYLARGO_GPIO_LEVELS0)
+ offset += KEYLARGO_GPIO_LEVELS0;
+ return offset;
+}
+
+static int pmac_cpufreq_suspend(struct cpufreq_policy *policy)
+{
+ /* Ok, this could be made a bit smarter, but let's be robust for now. We
+ * always force a speed change to high speed before sleep, to make sure
+ * we have appropriate voltage and/or bus speed for the wakeup process,
+ * and to make sure our loops_per_jiffies are "good enough", that is will
+ * not cause too short delays if we sleep in low speed and wake in high
+ * speed..
+ */
+ no_schedule = 1;
+ sleep_freq = cur_freq;
+ if (cur_freq == low_freq && !is_pmu_based)
+ do_set_cpu_speed(policy, CPUFREQ_HIGH, 0);
+ return 0;
+}
+
+static int pmac_cpufreq_resume(struct cpufreq_policy *policy)
+{
+ /* If we resume, first check if we have a get() function */
+ if (get_speed_proc)
+ cur_freq = get_speed_proc();
+ else
+ cur_freq = 0;
+
+ /* We don't, hrm... we don't really know our speed here, best
+ * is that we force a switch to whatever it was, which is
+ * probably high speed due to our suspend() routine
+ */
+ do_set_cpu_speed(policy, sleep_freq == low_freq ?
+ CPUFREQ_LOW : CPUFREQ_HIGH, 0);
+
+ ppc_proc_freq = cur_freq * 1000ul;
+
+ no_schedule = 0;
+ return 0;
+}
+
+static struct cpufreq_driver pmac_cpufreq_driver = {
+ .verify = pmac_cpufreq_verify,
+ .target = pmac_cpufreq_target,
+ .get = pmac_cpufreq_get_speed,
+ .init = pmac_cpufreq_cpu_init,
+ .suspend = pmac_cpufreq_suspend,
+ .resume = pmac_cpufreq_resume,
+ .flags = CPUFREQ_PM_NO_WARN,
+ .attr = pmac_cpu_freqs_attr,
+ .name = "powermac",
+ .owner = THIS_MODULE,
+};
+
+
+static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode)
+{
+ struct device_node *volt_gpio_np = of_find_node_by_name(NULL,
+ "voltage-gpio");
+ struct device_node *freq_gpio_np = of_find_node_by_name(NULL,
+ "frequency-gpio");
+ struct device_node *slew_done_gpio_np = of_find_node_by_name(NULL,
+ "slewing-done");
+ const u32 *value;
+
+ /*
+ * Check to see if it's GPIO driven or PMU only
+ *
+ * The way we extract the GPIO address is slightly hackish, but it
+ * works well enough for now. We need to abstract the whole GPIO
+ * stuff sooner or later anyway
+ */
+
+ if (volt_gpio_np)
+ voltage_gpio = read_gpio(volt_gpio_np);
+ if (freq_gpio_np)
+ frequency_gpio = read_gpio(freq_gpio_np);
+ if (slew_done_gpio_np)
+ slew_done_gpio = read_gpio(slew_done_gpio_np);
+
+ /* If we use the frequency GPIOs, calculate the min/max speeds based
+ * on the bus frequencies
+ */
+ if (frequency_gpio && slew_done_gpio) {
+ int lenp, rc;
+ const u32 *freqs, *ratio;
+
+ freqs = of_get_property(cpunode, "bus-frequencies", &lenp);
+ lenp /= sizeof(u32);
+ if (freqs == NULL || lenp != 2) {
+ printk(KERN_ERR "cpufreq: bus-frequencies incorrect or missing\n");
+ return 1;
+ }
+ ratio = of_get_property(cpunode, "processor-to-bus-ratio*2",
+ NULL);
+ if (ratio == NULL) {
+ printk(KERN_ERR "cpufreq: processor-to-bus-ratio*2 missing\n");
+ return 1;
+ }
+
+ /* Get the min/max bus frequencies */
+ low_freq = min(freqs[0], freqs[1]);
+ hi_freq = max(freqs[0], freqs[1]);
+
+ /* Grrrr.. It _seems_ that the device-tree is lying on the low bus
+ * frequency, it claims it to be around 84Mhz on some models while
+ * it appears to be approx. 101Mhz on all. Let's hack around here...
+ * fortunately, we don't need to be too precise
+ */
+ if (low_freq < 98000000)
+ low_freq = 101000000;
+
+ /* Convert those to CPU core clocks */
+ low_freq = (low_freq * (*ratio)) / 2000;
+ hi_freq = (hi_freq * (*ratio)) / 2000;
+
+ /* Now we get the frequencies, we read the GPIO to see what is out current
+ * speed
+ */
+ rc = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0);
+ cur_freq = (rc & 0x01) ? hi_freq : low_freq;
+
+ set_speed_proc = gpios_set_cpu_speed;
+ return 1;
+ }
+
+ /* If we use the PMU, look for the min & max frequencies in the
+ * device-tree
+ */
+ value = of_get_property(cpunode, "min-clock-frequency", NULL);
+ if (!value)
+ return 1;
+ low_freq = (*value) / 1000;
+ /* The PowerBook G4 12" (PowerBook6,1) has an error in the device-tree
+ * here */
+ if (low_freq < 100000)
+ low_freq *= 10;
+
+ value = of_get_property(cpunode, "max-clock-frequency", NULL);
+ if (!value)
+ return 1;
+ hi_freq = (*value) / 1000;
+ set_speed_proc = pmu_set_cpu_speed;
+ is_pmu_based = 1;
+
+ return 0;
+}
+
+static int pmac_cpufreq_init_7447A(struct device_node *cpunode)
+{
+ struct device_node *volt_gpio_np;
+
+ if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL)
+ return 1;
+
+ volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select");
+ if (volt_gpio_np)
+ voltage_gpio = read_gpio(volt_gpio_np);
+ if (!voltage_gpio){
+ printk(KERN_ERR "cpufreq: missing cpu-vcore-select gpio\n");
+ return 1;
+ }
+
+ /* OF only reports the high frequency */
+ hi_freq = cur_freq;
+ low_freq = cur_freq/2;
+
+ /* Read actual frequency from CPU */
+ cur_freq = dfs_get_cpu_speed();
+ set_speed_proc = dfs_set_cpu_speed;
+ get_speed_proc = dfs_get_cpu_speed;
+
+ return 0;
+}
+
+static int pmac_cpufreq_init_750FX(struct device_node *cpunode)
+{
+ struct device_node *volt_gpio_np;
+ u32 pvr;
+ const u32 *value;
+
+ if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL)
+ return 1;
+
+ hi_freq = cur_freq;
+ value = of_get_property(cpunode, "reduced-clock-frequency", NULL);
+ if (!value)
+ return 1;
+ low_freq = (*value) / 1000;
+
+ volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select");
+ if (volt_gpio_np)
+ voltage_gpio = read_gpio(volt_gpio_np);
+
+ pvr = mfspr(SPRN_PVR);
+ has_cpu_l2lve = !((pvr & 0xf00) == 0x100);
+
+ set_speed_proc = cpu_750fx_cpu_speed;
+ get_speed_proc = cpu_750fx_get_cpu_speed;
+ cur_freq = cpu_750fx_get_cpu_speed();
+
+ return 0;
+}
+
+/* Currently, we support the following machines:
+ *
+ * - Titanium PowerBook 1Ghz (PMU based, 667Mhz & 1Ghz)
+ * - Titanium PowerBook 800 (PMU based, 667Mhz & 800Mhz)
+ * - Titanium PowerBook 400 (PMU based, 300Mhz & 400Mhz)
+ * - Titanium PowerBook 500 (PMU based, 300Mhz & 500Mhz)
+ * - iBook2 500/600 (PMU based, 400Mhz & 500/600Mhz)
+ * - iBook2 700 (CPU based, 400Mhz & 700Mhz, support low voltage)
+ * - Recent MacRISC3 laptops
+ * - All new machines with 7447A CPUs
+ */
+static int __init pmac_cpufreq_setup(void)
+{
+ struct device_node *cpunode;
+ const u32 *value;
+
+ if (strstr(cmd_line, "nocpufreq"))
+ return 0;
+
+ /* Assume only one CPU */
+ cpunode = of_find_node_by_type(NULL, "cpu");
+ if (!cpunode)
+ goto out;
+
+ /* Get current cpu clock freq */
+ value = of_get_property(cpunode, "clock-frequency", NULL);
+ if (!value)
+ goto out;
+ cur_freq = (*value) / 1000;
+ transition_latency = CPUFREQ_ETERNAL;
+
+ /* Check for 7447A based MacRISC3 */
+ if (of_machine_is_compatible("MacRISC3") &&
+ of_get_property(cpunode, "dynamic-power-step", NULL) &&
+ PVR_VER(mfspr(SPRN_PVR)) == 0x8003) {
+ pmac_cpufreq_init_7447A(cpunode);
+ transition_latency = 8000000;
+ /* Check for other MacRISC3 machines */
+ } else if (of_machine_is_compatible("PowerBook3,4") ||
+ of_machine_is_compatible("PowerBook3,5") ||
+ of_machine_is_compatible("MacRISC3")) {
+ pmac_cpufreq_init_MacRISC3(cpunode);
+ /* Else check for iBook2 500/600 */
+ } else if (of_machine_is_compatible("PowerBook4,1")) {
+ hi_freq = cur_freq;
+ low_freq = 400000;
+ set_speed_proc = pmu_set_cpu_speed;
+ is_pmu_based = 1;
+ }
+ /* Else check for TiPb 550 */
+ else if (of_machine_is_compatible("PowerBook3,3") && cur_freq == 550000) {
+ hi_freq = cur_freq;
+ low_freq = 500000;
+ set_speed_proc = pmu_set_cpu_speed;
+ is_pmu_based = 1;
+ }
+ /* Else check for TiPb 400 & 500 */
+ else if (of_machine_is_compatible("PowerBook3,2")) {
+ /* We only know about the 400 MHz and the 500Mhz model
+ * they both have 300 MHz as low frequency
+ */
+ if (cur_freq < 350000 || cur_freq > 550000)
+ goto out;
+ hi_freq = cur_freq;
+ low_freq = 300000;
+ set_speed_proc = pmu_set_cpu_speed;
+ is_pmu_based = 1;
+ }
+ /* Else check for 750FX */
+ else if (PVR_VER(mfspr(SPRN_PVR)) == 0x7000)
+ pmac_cpufreq_init_750FX(cpunode);
+out:
+ of_node_put(cpunode);
+ if (set_speed_proc == NULL)
+ return -ENODEV;
+
+ pmac_cpu_freqs[CPUFREQ_LOW].frequency = low_freq;
+ pmac_cpu_freqs[CPUFREQ_HIGH].frequency = hi_freq;
+ ppc_proc_freq = cur_freq * 1000ul;
+
+ printk(KERN_INFO "Registering PowerMac CPU frequency driver\n");
+ printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n",
+ low_freq/1000, hi_freq/1000, cur_freq/1000);
+
+ return cpufreq_register_driver(&pmac_cpufreq_driver);
+}
+
+module_init(pmac_cpufreq_setup);
+
diff --git a/drivers/cpufreq/pmac64-cpufreq.c b/drivers/cpufreq/pmac64-cpufreq.c
new file mode 100644
index 00000000000..7ba423431cf
--- /dev/null
+++ b/drivers/cpufreq/pmac64-cpufreq.c
@@ -0,0 +1,746 @@
+/*
+ * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ * and Markus Demleitner <msdemlei@cl.uni-heidelberg.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This driver adds basic cpufreq support for SMU & 970FX based G5 Macs,
+ * that is iMac G5 and latest single CPU desktop.
+ */
+
+#undef DEBUG
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/cpufreq.h>
+#include <linux/init.h>
+#include <linux/completion.h>
+#include <linux/mutex.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/irq.h>
+#include <asm/sections.h>
+#include <asm/cputable.h>
+#include <asm/time.h>
+#include <asm/smu.h>
+#include <asm/pmac_pfunc.h>
+
+#define DBG(fmt...) pr_debug(fmt)
+
+/* see 970FX user manual */
+
+#define SCOM_PCR 0x0aa001 /* PCR scom addr */
+
+#define PCR_HILO_SELECT 0x80000000U /* 1 = PCR, 0 = PCRH */
+#define PCR_SPEED_FULL 0x00000000U /* 1:1 speed value */
+#define PCR_SPEED_HALF 0x00020000U /* 1:2 speed value */
+#define PCR_SPEED_QUARTER 0x00040000U /* 1:4 speed value */
+#define PCR_SPEED_MASK 0x000e0000U /* speed mask */
+#define PCR_SPEED_SHIFT 17
+#define PCR_FREQ_REQ_VALID 0x00010000U /* freq request valid */
+#define PCR_VOLT_REQ_VALID 0x00008000U /* volt request valid */
+#define PCR_TARGET_TIME_MASK 0x00006000U /* target time */
+#define PCR_STATLAT_MASK 0x00001f00U /* STATLAT value */
+#define PCR_SNOOPLAT_MASK 0x000000f0U /* SNOOPLAT value */
+#define PCR_SNOOPACC_MASK 0x0000000fU /* SNOOPACC value */
+
+#define SCOM_PSR 0x408001 /* PSR scom addr */
+/* warning: PSR is a 64 bits register */
+#define PSR_CMD_RECEIVED 0x2000000000000000U /* command received */
+#define PSR_CMD_COMPLETED 0x1000000000000000U /* command completed */
+#define PSR_CUR_SPEED_MASK 0x0300000000000000U /* current speed */
+#define PSR_CUR_SPEED_SHIFT (56)
+
+/*
+ * The G5 only supports two frequencies (Quarter speed is not supported)
+ */
+#define CPUFREQ_HIGH 0
+#define CPUFREQ_LOW 1
+
+static struct cpufreq_frequency_table g5_cpu_freqs[] = {
+ {CPUFREQ_HIGH, 0},
+ {CPUFREQ_LOW, 0},
+ {0, CPUFREQ_TABLE_END},
+};
+
+static struct freq_attr* g5_cpu_freqs_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
+/* Power mode data is an array of the 32 bits PCR values to use for
+ * the various frequencies, retrieved from the device-tree
+ */
+static int g5_pmode_cur;
+
+static void (*g5_switch_volt)(int speed_mode);
+static int (*g5_switch_freq)(int speed_mode);
+static int (*g5_query_freq)(void);
+
+static DEFINE_MUTEX(g5_switch_mutex);
+
+static unsigned long transition_latency;
+
+#ifdef CONFIG_PMAC_SMU
+
+static const u32 *g5_pmode_data;
+static int g5_pmode_max;
+
+static struct smu_sdbp_fvt *g5_fvt_table; /* table of op. points */
+static int g5_fvt_count; /* number of op. points */
+static int g5_fvt_cur; /* current op. point */
+
+/*
+ * SMU based voltage switching for Neo2 platforms
+ */
+
+static void g5_smu_switch_volt(int speed_mode)
+{
+ struct smu_simple_cmd cmd;
+
+ DECLARE_COMPLETION_ONSTACK(comp);
+ smu_queue_simple(&cmd, SMU_CMD_POWER_COMMAND, 8, smu_done_complete,
+ &comp, 'V', 'S', 'L', 'E', 'W',
+ 0xff, g5_fvt_cur+1, speed_mode);
+ wait_for_completion(&comp);
+}
+
+/*
+ * Platform function based voltage/vdnap switching for Neo2
+ */
+
+static struct pmf_function *pfunc_set_vdnap0;
+static struct pmf_function *pfunc_vdnap0_complete;
+
+static void g5_vdnap_switch_volt(int speed_mode)
+{
+ struct pmf_args args;
+ u32 slew, done = 0;
+ unsigned long timeout;
+
+ slew = (speed_mode == CPUFREQ_LOW) ? 1 : 0;
+ args.count = 1;
+ args.u[0].p = &slew;
+
+ pmf_call_one(pfunc_set_vdnap0, &args);
+
+ /* It's an irq GPIO so we should be able to just block here,
+ * I'll do that later after I've properly tested the IRQ code for
+ * platform functions
+ */
+ timeout = jiffies + HZ/10;
+ while(!time_after(jiffies, timeout)) {
+ args.count = 1;
+ args.u[0].p = &done;
+ pmf_call_one(pfunc_vdnap0_complete, &args);
+ if (done)
+ break;
+ msleep(1);
+ }
+ if (done == 0)
+ printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n");
+}
+
+
+/*
+ * SCOM based frequency switching for 970FX rev3
+ */
+static int g5_scom_switch_freq(int speed_mode)
+{
+ unsigned long flags;
+ int to;
+
+ /* If frequency is going up, first ramp up the voltage */
+ if (speed_mode < g5_pmode_cur)
+ g5_switch_volt(speed_mode);
+
+ local_irq_save(flags);
+
+ /* Clear PCR high */
+ scom970_write(SCOM_PCR, 0);
+ /* Clear PCR low */
+ scom970_write(SCOM_PCR, PCR_HILO_SELECT | 0);
+ /* Set PCR low */
+ scom970_write(SCOM_PCR, PCR_HILO_SELECT |
+ g5_pmode_data[speed_mode]);
+
+ /* Wait for completion */
+ for (to = 0; to < 10; to++) {
+ unsigned long psr = scom970_read(SCOM_PSR);
+
+ if ((psr & PSR_CMD_RECEIVED) == 0 &&
+ (((psr >> PSR_CUR_SPEED_SHIFT) ^
+ (g5_pmode_data[speed_mode] >> PCR_SPEED_SHIFT)) & 0x3)
+ == 0)
+ break;
+ if (psr & PSR_CMD_COMPLETED)
+ break;
+ udelay(100);
+ }
+
+ local_irq_restore(flags);
+
+ /* If frequency is going down, last ramp the voltage */
+ if (speed_mode > g5_pmode_cur)
+ g5_switch_volt(speed_mode);
+
+ g5_pmode_cur = speed_mode;
+ ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul;
+
+ return 0;
+}
+
+static int g5_scom_query_freq(void)
+{
+ unsigned long psr = scom970_read(SCOM_PSR);
+ int i;
+
+ for (i = 0; i <= g5_pmode_max; i++)
+ if ((((psr >> PSR_CUR_SPEED_SHIFT) ^
+ (g5_pmode_data[i] >> PCR_SPEED_SHIFT)) & 0x3) == 0)
+ break;
+ return i;
+}
+
+/*
+ * Fake voltage switching for platforms with missing support
+ */
+
+static void g5_dummy_switch_volt(int speed_mode)
+{
+}
+
+#endif /* CONFIG_PMAC_SMU */
+
+/*
+ * Platform function based voltage switching for PowerMac7,2 & 7,3
+ */
+
+static struct pmf_function *pfunc_cpu0_volt_high;
+static struct pmf_function *pfunc_cpu0_volt_low;
+static struct pmf_function *pfunc_cpu1_volt_high;
+static struct pmf_function *pfunc_cpu1_volt_low;
+
+static void g5_pfunc_switch_volt(int speed_mode)
+{
+ if (speed_mode == CPUFREQ_HIGH) {
+ if (pfunc_cpu0_volt_high)
+ pmf_call_one(pfunc_cpu0_volt_high, NULL);
+ if (pfunc_cpu1_volt_high)
+ pmf_call_one(pfunc_cpu1_volt_high, NULL);
+ } else {
+ if (pfunc_cpu0_volt_low)
+ pmf_call_one(pfunc_cpu0_volt_low, NULL);
+ if (pfunc_cpu1_volt_low)
+ pmf_call_one(pfunc_cpu1_volt_low, NULL);
+ }
+ msleep(10); /* should be faster , to fix */
+}
+
+/*
+ * Platform function based frequency switching for PowerMac7,2 & 7,3
+ */
+
+static struct pmf_function *pfunc_cpu_setfreq_high;
+static struct pmf_function *pfunc_cpu_setfreq_low;
+static struct pmf_function *pfunc_cpu_getfreq;
+static struct pmf_function *pfunc_slewing_done;
+
+static int g5_pfunc_switch_freq(int speed_mode)
+{
+ struct pmf_args args;
+ u32 done = 0;
+ unsigned long timeout;
+ int rc;
+
+ DBG("g5_pfunc_switch_freq(%d)\n", speed_mode);
+
+ /* If frequency is going up, first ramp up the voltage */
+ if (speed_mode < g5_pmode_cur)
+ g5_switch_volt(speed_mode);
+
+ /* Do it */
+ if (speed_mode == CPUFREQ_HIGH)
+ rc = pmf_call_one(pfunc_cpu_setfreq_high, NULL);
+ else
+ rc = pmf_call_one(pfunc_cpu_setfreq_low, NULL);
+
+ if (rc)
+ printk(KERN_WARNING "cpufreq: pfunc switch error %d\n", rc);
+
+ /* It's an irq GPIO so we should be able to just block here,
+ * I'll do that later after I've properly tested the IRQ code for
+ * platform functions
+ */
+ timeout = jiffies + HZ/10;
+ while(!time_after(jiffies, timeout)) {
+ args.count = 1;
+ args.u[0].p = &done;
+ pmf_call_one(pfunc_slewing_done, &args);
+ if (done)
+ break;
+ msleep(1);
+ }
+ if (done == 0)
+ printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n");
+
+ /* If frequency is going down, last ramp the voltage */
+ if (speed_mode > g5_pmode_cur)
+ g5_switch_volt(speed_mode);
+
+ g5_pmode_cur = speed_mode;
+ ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul;
+
+ return 0;
+}
+
+static int g5_pfunc_query_freq(void)
+{
+ struct pmf_args args;
+ u32 val = 0;
+
+ args.count = 1;
+ args.u[0].p = &val;
+ pmf_call_one(pfunc_cpu_getfreq, &args);
+ return val ? CPUFREQ_HIGH : CPUFREQ_LOW;
+}
+
+
+/*
+ * Common interface to the cpufreq core
+ */
+
+static int g5_cpufreq_verify(struct cpufreq_policy *policy)
+{
+ return cpufreq_frequency_table_verify(policy, g5_cpu_freqs);
+}
+
+static int g5_cpufreq_target(struct cpufreq_policy *policy,
+ unsigned int target_freq, unsigned int relation)
+{
+ unsigned int newstate = 0;
+ struct cpufreq_freqs freqs;
+ int rc;
+
+ if (cpufreq_frequency_table_target(policy, g5_cpu_freqs,
+ target_freq, relation, &newstate))
+ return -EINVAL;
+
+ if (g5_pmode_cur == newstate)
+ return 0;
+
+ mutex_lock(&g5_switch_mutex);
+
+ freqs.old = g5_cpu_freqs[g5_pmode_cur].frequency;
+ freqs.new = g5_cpu_freqs[newstate].frequency;
+
+ cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
+ rc = g5_switch_freq(newstate);
+ cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
+
+ mutex_unlock(&g5_switch_mutex);
+
+ return rc;
+}
+
+static unsigned int g5_cpufreq_get_speed(unsigned int cpu)
+{
+ return g5_cpu_freqs[g5_pmode_cur].frequency;
+}
+
+static int g5_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+ policy->cpuinfo.transition_latency = transition_latency;
+ policy->cur = g5_cpu_freqs[g5_query_freq()].frequency;
+ /* secondary CPUs are tied to the primary one by the
+ * cpufreq core if in the secondary policy we tell it that
+ * it actually must be one policy together with all others. */
+ cpumask_copy(policy->cpus, cpu_online_mask);
+ cpufreq_frequency_table_get_attr(g5_cpu_freqs, policy->cpu);
+
+ return cpufreq_frequency_table_cpuinfo(policy,
+ g5_cpu_freqs);
+}
+
+
+static struct cpufreq_driver g5_cpufreq_driver = {
+ .name = "powermac",
+ .owner = THIS_MODULE,
+ .flags = CPUFREQ_CONST_LOOPS,
+ .init = g5_cpufreq_cpu_init,
+ .verify = g5_cpufreq_verify,
+ .target = g5_cpufreq_target,
+ .get = g5_cpufreq_get_speed,
+ .attr = g5_cpu_freqs_attr,
+};
+
+
+#ifdef CONFIG_PMAC_SMU
+
+static int __init g5_neo2_cpufreq_init(struct device_node *cpus)
+{
+ struct device_node *cpunode;
+ unsigned int psize, ssize;
+ unsigned long max_freq;
+ char *freq_method, *volt_method;
+ const u32 *valp;
+ u32 pvr_hi;
+ int use_volts_vdnap = 0;
+ int use_volts_smu = 0;
+ int rc = -ENODEV;
+
+ /* Check supported platforms */
+ if (of_machine_is_compatible("PowerMac8,1") ||
+ of_machine_is_compatible("PowerMac8,2") ||
+ of_machine_is_compatible("PowerMac9,1"))
+ use_volts_smu = 1;
+ else if (of_machine_is_compatible("PowerMac11,2"))
+ use_volts_vdnap = 1;
+ else
+ return -ENODEV;
+
+ /* Get first CPU node */
+ for (cpunode = NULL;
+ (cpunode = of_get_next_child(cpus, cpunode)) != NULL;) {
+ const u32 *reg = of_get_property(cpunode, "reg", NULL);
+ if (reg == NULL || (*reg) != 0)
+ continue;
+ if (!strcmp(cpunode->type, "cpu"))
+ break;
+ }
+ if (cpunode == NULL) {
+ printk(KERN_ERR "cpufreq: Can't find any CPU 0 node\n");
+ return -ENODEV;
+ }
+
+ /* Check 970FX for now */
+ valp = of_get_property(cpunode, "cpu-version", NULL);
+ if (!valp) {
+ DBG("No cpu-version property !\n");
+ goto bail_noprops;
+ }
+ pvr_hi = (*valp) >> 16;
+ if (pvr_hi != 0x3c && pvr_hi != 0x44) {
+ printk(KERN_ERR "cpufreq: Unsupported CPU version\n");
+ goto bail_noprops;
+ }
+
+ /* Look for the powertune data in the device-tree */
+ g5_pmode_data = of_get_property(cpunode, "power-mode-data",&psize);
+ if (!g5_pmode_data) {
+ DBG("No power-mode-data !\n");
+ goto bail_noprops;
+ }
+ g5_pmode_max = psize / sizeof(u32) - 1;
+
+ if (use_volts_smu) {
+ const struct smu_sdbp_header *shdr;
+
+ /* Look for the FVT table */
+ shdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL);
+ if (!shdr)
+ goto bail_noprops;
+ g5_fvt_table = (struct smu_sdbp_fvt *)&shdr[1];
+ ssize = (shdr->len * sizeof(u32)) -
+ sizeof(struct smu_sdbp_header);
+ g5_fvt_count = ssize / sizeof(struct smu_sdbp_fvt);
+ g5_fvt_cur = 0;
+
+ /* Sanity checking */
+ if (g5_fvt_count < 1 || g5_pmode_max < 1)
+ goto bail_noprops;
+
+ g5_switch_volt = g5_smu_switch_volt;
+ volt_method = "SMU";
+ } else if (use_volts_vdnap) {
+ struct device_node *root;
+
+ root = of_find_node_by_path("/");
+ if (root == NULL) {
+ printk(KERN_ERR "cpufreq: Can't find root of "
+ "device tree\n");
+ goto bail_noprops;
+ }
+ pfunc_set_vdnap0 = pmf_find_function(root, "set-vdnap0");
+ pfunc_vdnap0_complete =
+ pmf_find_function(root, "slewing-done");
+ if (pfunc_set_vdnap0 == NULL ||
+ pfunc_vdnap0_complete == NULL) {
+ printk(KERN_ERR "cpufreq: Can't find required "
+ "platform function\n");
+ goto bail_noprops;
+ }
+
+ g5_switch_volt = g5_vdnap_switch_volt;
+ volt_method = "GPIO";
+ } else {
+ g5_switch_volt = g5_dummy_switch_volt;
+ volt_method = "none";
+ }
+
+ /*
+ * From what I see, clock-frequency is always the maximal frequency.
+ * The current driver can not slew sysclk yet, so we really only deal
+ * with powertune steps for now. We also only implement full freq and
+ * half freq in this version. So far, I haven't yet seen a machine
+ * supporting anything else.
+ */
+ valp = of_get_property(cpunode, "clock-frequency", NULL);
+ if (!valp)
+ return -ENODEV;
+ max_freq = (*valp)/1000;
+ g5_cpu_freqs[0].frequency = max_freq;
+ g5_cpu_freqs[1].frequency = max_freq/2;
+
+ /* Set callbacks */
+ transition_latency = 12000;
+ g5_switch_freq = g5_scom_switch_freq;
+ g5_query_freq = g5_scom_query_freq;
+ freq_method = "SCOM";
+
+ /* Force apply current frequency to make sure everything is in
+ * sync (voltage is right for example). Firmware may leave us with
+ * a strange setting ...
+ */
+ g5_switch_volt(CPUFREQ_HIGH);
+ msleep(10);
+ g5_pmode_cur = -1;
+ g5_switch_freq(g5_query_freq());
+
+ printk(KERN_INFO "Registering G5 CPU frequency driver\n");
+ printk(KERN_INFO "Frequency method: %s, Voltage method: %s\n",
+ freq_method, volt_method);
+ printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
+ g5_cpu_freqs[1].frequency/1000,
+ g5_cpu_freqs[0].frequency/1000,
+ g5_cpu_freqs[g5_pmode_cur].frequency/1000);
+
+ rc = cpufreq_register_driver(&g5_cpufreq_driver);
+
+ /* We keep the CPU node on hold... hopefully, Apple G5 don't have
+ * hotplug CPU with a dynamic device-tree ...
+ */
+ return rc;
+
+ bail_noprops:
+ of_node_put(cpunode);
+
+ return rc;
+}
+
+#endif /* CONFIG_PMAC_SMU */
+
+
+static int __init g5_pm72_cpufreq_init(struct device_node *cpus)
+{
+ struct device_node *cpuid = NULL, *hwclock = NULL, *cpunode = NULL;
+ const u8 *eeprom = NULL;
+ const u32 *valp;
+ u64 max_freq, min_freq, ih, il;
+ int has_volt = 1, rc = 0;
+
+ DBG("cpufreq: Initializing for PowerMac7,2, PowerMac7,3 and"
+ " RackMac3,1...\n");
+
+ /* Get first CPU node */
+ for (cpunode = NULL;
+ (cpunode = of_get_next_child(cpus, cpunode)) != NULL;) {
+ if (!strcmp(cpunode->type, "cpu"))
+ break;
+ }
+ if (cpunode == NULL) {
+ printk(KERN_ERR "cpufreq: Can't find any CPU node\n");
+ return -ENODEV;
+ }
+
+ /* Lookup the cpuid eeprom node */
+ cpuid = of_find_node_by_path("/u3@0,f8000000/i2c@f8001000/cpuid@a0");
+ if (cpuid != NULL)
+ eeprom = of_get_property(cpuid, "cpuid", NULL);
+ if (eeprom == NULL) {
+ printk(KERN_ERR "cpufreq: Can't find cpuid EEPROM !\n");
+ rc = -ENODEV;
+ goto bail;
+ }
+
+ /* Lookup the i2c hwclock */
+ for (hwclock = NULL;
+ (hwclock = of_find_node_by_name(hwclock, "i2c-hwclock")) != NULL;){
+ const char *loc = of_get_property(hwclock,
+ "hwctrl-location", NULL);
+ if (loc == NULL)
+ continue;
+ if (strcmp(loc, "CPU CLOCK"))
+ continue;
+ if (!of_get_property(hwclock, "platform-get-frequency", NULL))
+ continue;
+ break;
+ }
+ if (hwclock == NULL) {
+ printk(KERN_ERR "cpufreq: Can't find i2c clock chip !\n");
+ rc = -ENODEV;
+ goto bail;
+ }
+
+ DBG("cpufreq: i2c clock chip found: %s\n", hwclock->full_name);
+
+ /* Now get all the platform functions */
+ pfunc_cpu_getfreq =
+ pmf_find_function(hwclock, "get-frequency");
+ pfunc_cpu_setfreq_high =
+ pmf_find_function(hwclock, "set-frequency-high");
+ pfunc_cpu_setfreq_low =
+ pmf_find_function(hwclock, "set-frequency-low");
+ pfunc_slewing_done =
+ pmf_find_function(hwclock, "slewing-done");
+ pfunc_cpu0_volt_high =
+ pmf_find_function(hwclock, "set-voltage-high-0");
+ pfunc_cpu0_volt_low =
+ pmf_find_function(hwclock, "set-voltage-low-0");
+ pfunc_cpu1_volt_high =
+ pmf_find_function(hwclock, "set-voltage-high-1");
+ pfunc_cpu1_volt_low =
+ pmf_find_function(hwclock, "set-voltage-low-1");
+
+ /* Check we have minimum requirements */
+ if (pfunc_cpu_getfreq == NULL || pfunc_cpu_setfreq_high == NULL ||
+ pfunc_cpu_setfreq_low == NULL || pfunc_slewing_done == NULL) {
+ printk(KERN_ERR "cpufreq: Can't find platform functions !\n");
+ rc = -ENODEV;
+ goto bail;
+ }
+
+ /* Check that we have complete sets */
+ if (pfunc_cpu0_volt_high == NULL || pfunc_cpu0_volt_low == NULL) {
+ pmf_put_function(pfunc_cpu0_volt_high);
+ pmf_put_function(pfunc_cpu0_volt_low);
+ pfunc_cpu0_volt_high = pfunc_cpu0_volt_low = NULL;
+ has_volt = 0;
+ }
+ if (!has_volt ||
+ pfunc_cpu1_volt_high == NULL || pfunc_cpu1_volt_low == NULL) {
+ pmf_put_function(pfunc_cpu1_volt_high);
+ pmf_put_function(pfunc_cpu1_volt_low);
+ pfunc_cpu1_volt_high = pfunc_cpu1_volt_low = NULL;
+ }
+
+ /* Note: The device tree also contains a "platform-set-values"
+ * function for which I haven't quite figured out the usage. It
+ * might have to be called on init and/or wakeup, I'm not too sure
+ * but things seem to work fine without it so far ...
+ */
+
+ /* Get max frequency from device-tree */
+ valp = of_get_property(cpunode, "clock-frequency", NULL);
+ if (!valp) {
+ printk(KERN_ERR "cpufreq: Can't find CPU frequency !\n");
+ rc = -ENODEV;
+ goto bail;
+ }
+
+ max_freq = (*valp)/1000;
+
+ /* Now calculate reduced frequency by using the cpuid input freq
+ * ratio. This requires 64 bits math unless we are willing to lose
+ * some precision
+ */
+ ih = *((u32 *)(eeprom + 0x10));
+ il = *((u32 *)(eeprom + 0x20));
+
+ /* Check for machines with no useful settings */
+ if (il == ih) {
+ printk(KERN_WARNING "cpufreq: No low frequency mode available"
+ " on this model !\n");
+ rc = -ENODEV;
+ goto bail;
+ }
+
+ min_freq = 0;
+ if (ih != 0 && il != 0)
+ min_freq = (max_freq * il) / ih;
+
+ /* Sanity check */
+ if (min_freq >= max_freq || min_freq < 1000) {
+ printk(KERN_ERR "cpufreq: Can't calculate low frequency !\n");
+ rc = -ENXIO;
+ goto bail;
+ }
+ g5_cpu_freqs[0].frequency = max_freq;
+ g5_cpu_freqs[1].frequency = min_freq;
+
+ /* Set callbacks */
+ transition_latency = CPUFREQ_ETERNAL;
+ g5_switch_volt = g5_pfunc_switch_volt;
+ g5_switch_freq = g5_pfunc_switch_freq;
+ g5_query_freq = g5_pfunc_query_freq;
+
+ /* Force apply current frequency to make sure everything is in
+ * sync (voltage is right for example). Firmware may leave us with
+ * a strange setting ...
+ */
+ g5_switch_volt(CPUFREQ_HIGH);
+ msleep(10);
+ g5_pmode_cur = -1;
+ g5_switch_freq(g5_query_freq());
+
+ printk(KERN_INFO "Registering G5 CPU frequency driver\n");
+ printk(KERN_INFO "Frequency method: i2c/pfunc, "
+ "Voltage method: %s\n", has_volt ? "i2c/pfunc" : "none");
+ printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
+ g5_cpu_freqs[1].frequency/1000,
+ g5_cpu_freqs[0].frequency/1000,
+ g5_cpu_freqs[g5_pmode_cur].frequency/1000);
+
+ rc = cpufreq_register_driver(&g5_cpufreq_driver);
+ bail:
+ if (rc != 0) {
+ pmf_put_function(pfunc_cpu_getfreq);
+ pmf_put_function(pfunc_cpu_setfreq_high);
+ pmf_put_function(pfunc_cpu_setfreq_low);
+ pmf_put_function(pfunc_slewing_done);
+ pmf_put_function(pfunc_cpu0_volt_high);
+ pmf_put_function(pfunc_cpu0_volt_low);
+ pmf_put_function(pfunc_cpu1_volt_high);
+ pmf_put_function(pfunc_cpu1_volt_low);
+ }
+ of_node_put(hwclock);
+ of_node_put(cpuid);
+ of_node_put(cpunode);
+
+ return rc;
+}
+
+static int __init g5_cpufreq_init(void)
+{
+ struct device_node *cpus;
+ int rc = 0;
+
+ cpus = of_find_node_by_path("/cpus");
+ if (cpus == NULL) {
+ DBG("No /cpus node !\n");
+ return -ENODEV;
+ }
+
+ if (of_machine_is_compatible("PowerMac7,2") ||
+ of_machine_is_compatible("PowerMac7,3") ||
+ of_machine_is_compatible("RackMac3,1"))
+ rc = g5_pm72_cpufreq_init(cpus);
+#ifdef CONFIG_PMAC_SMU
+ else
+ rc = g5_neo2_cpufreq_init(cpus);
+#endif /* CONFIG_PMAC_SMU */
+
+ of_node_put(cpus);
+ return rc;
+}
+
+module_init(g5_cpufreq_init);
+
+
+MODULE_LICENSE("GPL");
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-18 01:16:56 +0000