diff options
Diffstat (limited to 'drivers')
31 files changed, 3 insertions, 59 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 3835321b8cf..00aba08f01a 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -25,6 +25,9 @@ menuconfig NETDEVICES # that for each of the symbols. if NETDEVICES +config MII + tristate + config NET_CORE default y bool "Network core driver support" @@ -100,13 +103,6 @@ config NET_FC adaptor below. You also should have said Y to "SCSI support" and "SCSI generic support". -config MII - tristate "Generic Media Independent Interface device support" - help - Most ethernet controllers have MII transceiver either as an external - or internal device. It is safe to say Y or M here even if your - ethernet card lacks MII. - config IFB tristate "Intermediate Functional Block support" depends on NET_CLS_ACT diff --git a/drivers/net/ethernet/3com/Kconfig b/drivers/net/ethernet/3com/Kconfig index 1c71c763f68..f00c76377b4 100644 --- a/drivers/net/ethernet/3com/Kconfig +++ b/drivers/net/ethernet/3com/Kconfig @@ -67,7 +67,6 @@ config PCMCIA_3C589 config VORTEX tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support" depends on (PCI || EISA) && HAS_IOPORT - select NET_CORE select MII ---help--- This option enables driver support for a large number of 10Mbps and diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig index 18fd6fbeb10..a989669b353 100644 --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig @@ -64,7 +64,6 @@ config JME tristate "JMicron(R) PCI-Express Gigabit Ethernet support" depends on PCI select CRC32 - select NET_CORE select MII ---help--- This driver supports the PCI-Express gigabit ethernet adapters @@ -96,7 +95,6 @@ config FEALNX tristate "Myson MTD-8xx PCI Ethernet support" depends on PCI select CRC32 - select NET_CORE select MII ---help--- Say Y here to support the Myson MTD-800 family of PCI-based Ethernet @@ -107,7 +105,6 @@ source "drivers/net/ethernet/8390/Kconfig" config NET_NETX tristate "NetX Ethernet support" - select NET_CORE select MII depends on ARCH_NETX ---help--- @@ -125,7 +122,6 @@ source "drivers/net/ethernet/oki-semi/Kconfig" config ETHOC tristate "OpenCores 10/100 Mbps Ethernet MAC support" depends on HAS_IOMEM && HAS_DMA - select NET_CORE select MII select PHYLIB select CRC32 diff --git a/drivers/net/ethernet/adaptec/Kconfig b/drivers/net/ethernet/adaptec/Kconfig index 0bff571b1bb..5c804bbe3da 100644 --- a/drivers/net/ethernet/adaptec/Kconfig +++ b/drivers/net/ethernet/adaptec/Kconfig @@ -22,7 +22,6 @@ config ADAPTEC_STARFIRE tristate "Adaptec Starfire/DuraLAN support" depends on PCI select CRC32 - select NET_CORE select MII ---help--- Say Y here if you have an Adaptec Starfire (or DuraLAN) PCI network diff --git a/drivers/net/ethernet/adi/Kconfig b/drivers/net/ethernet/adi/Kconfig index a9481606bbc..f952fff6a9a 100644 --- a/drivers/net/ethernet/adi/Kconfig +++ b/drivers/net/ethernet/adi/Kconfig @@ -23,7 +23,6 @@ config BFIN_MAC tristate "Blackfin on-chip MAC support" depends on (BF516 || BF518 || BF526 || BF527 || BF536 || BF537) select CRC32 - select NET_CORE select MII select PHYLIB select BFIN_MAC_USE_L1 if DMA_UNCACHED_NONE diff --git a/drivers/net/ethernet/allwinner/Kconfig b/drivers/net/ethernet/allwinner/Kconfig index 66d35324f31..53ad213e865 100644 --- a/drivers/net/ethernet/allwinner/Kconfig +++ b/drivers/net/ethernet/allwinner/Kconfig @@ -24,7 +24,6 @@ config SUN4I_EMAC depends on ARCH_SUNXI depends on OF select CRC32 - select NET_CORE select MII select PHYLIB ---help--- diff --git a/drivers/net/ethernet/amd/Kconfig b/drivers/net/ethernet/amd/Kconfig index 13d74aa4033..562df46e0a8 100644 --- a/drivers/net/ethernet/amd/Kconfig +++ b/drivers/net/ethernet/amd/Kconfig @@ -34,7 +34,6 @@ config AMD8111_ETH tristate "AMD 8111 (new PCI LANCE) support" depends on PCI select CRC32 - select NET_CORE select MII ---help--- If you have an AMD 8111-based PCI LANCE ethernet card, @@ -60,7 +59,6 @@ config PCNET32 tristate "AMD PCnet32 PCI support" depends on PCI select CRC32 - select NET_CORE select MII ---help--- If you have a PCnet32 or PCnetPCI based network (Ethernet) card, diff --git a/drivers/net/ethernet/atheros/Kconfig b/drivers/net/ethernet/atheros/Kconfig index ad6aa1e9834..39e8d6cc884 100644 --- a/drivers/net/ethernet/atheros/Kconfig +++ b/drivers/net/ethernet/atheros/Kconfig @@ -22,7 +22,6 @@ config ATL2 tristate "Atheros L2 Fast Ethernet support" depends on PCI select CRC32 - select NET_CORE select MII ---help--- This driver supports the Atheros L2 fast ethernet adapter. @@ -34,7 +33,6 @@ config ATL1 tristate "Atheros/Attansic L1 Gigabit Ethernet support" depends on PCI select CRC32 - select NET_CORE select MII ---help--- This driver supports the Atheros/Attansic L1 gigabit ethernet @@ -47,7 +45,6 @@ config ATL1E tristate "Atheros L1E Gigabit Ethernet support" depends on PCI select CRC32 - select NET_CORE select MII ---help--- This driver supports the Atheros L1E gigabit ethernet adapter. @@ -59,7 +56,6 @@ config ATL1C tristate "Atheros L1C Gigabit Ethernet support" depends on PCI select CRC32 - select NET_CORE select MII ---help--- This driver supports the Atheros L1C gigabit ethernet adapter. diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig index 3e69b3f8809..1d680baf43d 100644 --- a/drivers/net/ethernet/broadcom/Kconfig +++ b/drivers/net/ethernet/broadcom/Kconfig @@ -22,7 +22,6 @@ config B44 tristate "Broadcom 440x/47xx ethernet support" depends on SSB_POSSIBLE && HAS_DMA select SSB - select NET_CORE select MII ---help--- If you have a network (Ethernet) controller of this type, say Y @@ -54,7 +53,6 @@ config B44_PCI config BCM63XX_ENET tristate "Broadcom 63xx internal mac support" depends on BCM63XX - select NET_CORE select MII select PHYLIB help diff --git a/drivers/net/ethernet/cirrus/Kconfig b/drivers/net/ethernet/cirrus/Kconfig index 8388e36cf08..7403dff8f14 100644 --- a/drivers/net/ethernet/cirrus/Kconfig +++ b/drivers/net/ethernet/cirrus/Kconfig @@ -44,7 +44,6 @@ config CS89x0_PLATFORM config EP93XX_ETH tristate "EP93xx Ethernet support" depends on ARM && ARCH_EP93XX - select NET_CORE select MII help This is a driver for the ethernet hardware included in EP93xx CPUs. diff --git a/drivers/net/ethernet/davicom/Kconfig b/drivers/net/ethernet/davicom/Kconfig index 9745fe5e803..316c5e5a92a 100644 --- a/drivers/net/ethernet/davicom/Kconfig +++ b/drivers/net/ethernet/davicom/Kconfig @@ -6,7 +6,6 @@ config DM9000 tristate "DM9000 support" depends on ARM || BLACKFIN || MIPS || COLDFIRE select CRC32 - select NET_CORE select MII ---help--- Support for DM9000 chipset. diff --git a/drivers/net/ethernet/dec/tulip/Kconfig b/drivers/net/ethernet/dec/tulip/Kconfig index 1df33c799c0..eb9ba6e97d0 100644 --- a/drivers/net/ethernet/dec/tulip/Kconfig +++ b/drivers/net/ethernet/dec/tulip/Kconfig @@ -126,7 +126,6 @@ config WINBOND_840 tristate "Winbond W89c840 Ethernet support" depends on PCI select CRC32 - select NET_CORE select MII ---help--- This driver is for the Winbond W89c840 chip. It also works with diff --git a/drivers/net/ethernet/dlink/Kconfig b/drivers/net/ethernet/dlink/Kconfig index ee26ce78e27..c543ac11ce0 100644 --- a/drivers/net/ethernet/dlink/Kconfig +++ b/drivers/net/ethernet/dlink/Kconfig @@ -36,7 +36,6 @@ config SUNDANCE tristate "Sundance Alta support" depends on PCI select CRC32 - select NET_CORE select MII ---help--- This driver is for the Sundance "Alta" chip. diff --git a/drivers/net/ethernet/faraday/Kconfig b/drivers/net/ethernet/faraday/Kconfig index b8974b9e3b4..5918c689169 100644 --- a/drivers/net/ethernet/faraday/Kconfig +++ b/drivers/net/ethernet/faraday/Kconfig @@ -21,7 +21,6 @@ if NET_VENDOR_FARADAY config FTMAC100 tristate "Faraday FTMAC100 10/100 Ethernet support" depends on ARM - select NET_CORE select MII ---help--- This driver supports the FTMAC100 10/100 Ethernet controller diff --git a/drivers/net/ethernet/freescale/fs_enet/Kconfig b/drivers/net/ethernet/freescale/fs_enet/Kconfig index 268414d9f2c..be92229f2c2 100644 --- a/drivers/net/ethernet/freescale/fs_enet/Kconfig +++ b/drivers/net/ethernet/freescale/fs_enet/Kconfig @@ -1,7 +1,6 @@ config FS_ENET tristate "Freescale Ethernet Driver" depends on NET_VENDOR_FREESCALE && (CPM1 || CPM2 || PPC_MPC512x) - select NET_CORE select MII select PHYLIB diff --git a/drivers/net/ethernet/icplus/Kconfig b/drivers/net/ethernet/icplus/Kconfig index 5119ef18953..14a66e9d2e2 100644 --- a/drivers/net/ethernet/icplus/Kconfig +++ b/drivers/net/ethernet/icplus/Kconfig @@ -5,7 +5,6 @@ config IP1000 tristate "IP1000 Gigabit Ethernet support" depends on PCI - select NET_CORE select MII ---help--- This driver supports IP1000 gigabit Ethernet cards. diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig index 05f7264c51f..f0e7ed20a75 100644 --- a/drivers/net/ethernet/intel/Kconfig +++ b/drivers/net/ethernet/intel/Kconfig @@ -20,7 +20,6 @@ if NET_VENDOR_INTEL config E100 tristate "Intel(R) PRO/100+ support" depends on PCI - select NET_CORE select MII ---help--- This driver supports Intel(R) PRO/100 family of adapters. diff --git a/drivers/net/ethernet/micrel/Kconfig b/drivers/net/ethernet/micrel/Kconfig index fe42fc00d8d..d16b11ed2e5 100644 --- a/drivers/net/ethernet/micrel/Kconfig +++ b/drivers/net/ethernet/micrel/Kconfig @@ -22,7 +22,6 @@ if NET_VENDOR_MICREL config ARM_KS8695_ETHER tristate "KS8695 Ethernet support" depends on ARM && ARCH_KS8695 - select NET_CORE select MII ---help--- If you wish to compile a kernel for the KS8695 and want to @@ -39,7 +38,6 @@ config KS8842 config KS8851 tristate "Micrel KS8851 SPI" depends on SPI - select NET_CORE select MII select CRC32 select EEPROM_93CX6 @@ -49,7 +47,6 @@ config KS8851 config KS8851_MLL tristate "Micrel KS8851 MLL" depends on HAS_IOMEM - select NET_CORE select MII ---help--- This platform driver is for Micrel KS8851 Address/data bus @@ -58,7 +55,6 @@ config KS8851_MLL config KSZ884X_PCI tristate "Micrel KSZ8841/2 PCI" depends on PCI - select NET_CORE select MII select CRC32 ---help--- diff --git a/drivers/net/ethernet/nuvoton/Kconfig b/drivers/net/ethernet/nuvoton/Kconfig index 334c1718309..01182b55947 100644 --- a/drivers/net/ethernet/nuvoton/Kconfig +++ b/drivers/net/ethernet/nuvoton/Kconfig @@ -22,7 +22,6 @@ config W90P910_ETH tristate "Nuvoton w90p910 Ethernet support" depends on ARM && ARCH_W90X900 select PHYLIB - select NET_CORE select MII ---help--- Say Y here if you want to use built-in Ethernet ports diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig b/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig index 34d05bf72b2..cb22341a14a 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig +++ b/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig @@ -5,7 +5,6 @@ config PCH_GBE tristate "OKI SEMICONDUCTOR IOH(ML7223/ML7831) GbE" depends on PCI - select NET_CORE select MII select PTP_1588_CLOCK_PCH ---help--- diff --git a/drivers/net/ethernet/packetengines/Kconfig b/drivers/net/ethernet/packetengines/Kconfig index cbbeca3f8c5..8d5180043c7 100644 --- a/drivers/net/ethernet/packetengines/Kconfig +++ b/drivers/net/ethernet/packetengines/Kconfig @@ -21,7 +21,6 @@ if NET_PACKET_ENGINE config HAMACHI tristate "Packet Engines Hamachi GNIC-II support" depends on PCI - select NET_CORE select MII ---help--- If you have a Gigabit Ethernet card of this type, say Y and read diff --git a/drivers/net/ethernet/rdc/Kconfig b/drivers/net/ethernet/rdc/Kconfig index c8ba4b3494c..2055f7eb2ba 100644 --- a/drivers/net/ethernet/rdc/Kconfig +++ b/drivers/net/ethernet/rdc/Kconfig @@ -22,7 +22,6 @@ config R6040 tristate "RDC R6040 Fast Ethernet Adapter support" depends on PCI select CRC32 - select NET_CORE select MII select PHYLIB ---help--- diff --git a/drivers/net/ethernet/realtek/Kconfig b/drivers/net/ethernet/realtek/Kconfig index 783fa8b5cde..ae5d027096e 100644 --- a/drivers/net/ethernet/realtek/Kconfig +++ b/drivers/net/ethernet/realtek/Kconfig @@ -37,7 +37,6 @@ config 8139CP tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support" depends on PCI select CRC32 - select NET_CORE select MII ---help--- This is a driver for the Fast Ethernet PCI network cards based on @@ -52,7 +51,6 @@ config 8139TOO tristate "RealTek RTL-8129/8130/8139 PCI Fast Ethernet Adapter support" depends on PCI select CRC32 - select NET_CORE select MII ---help--- This is a driver for the Fast Ethernet PCI network cards based on @@ -107,7 +105,6 @@ config R8169 depends on PCI select FW_LOADER select CRC32 - select NET_CORE select MII ---help--- Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter. diff --git a/drivers/net/ethernet/renesas/Kconfig b/drivers/net/ethernet/renesas/Kconfig index 267eac054fa..544514e6618 100644 --- a/drivers/net/ethernet/renesas/Kconfig +++ b/drivers/net/ethernet/renesas/Kconfig @@ -5,7 +5,6 @@ config SH_ETH tristate "Renesas SuperH Ethernet support" select CRC32 - select NET_CORE select MII select MDIO_BITBANG select PHYLIB diff --git a/drivers/net/ethernet/sgi/Kconfig b/drivers/net/ethernet/sgi/Kconfig index c1c4bb868a3..e832f46660c 100644 --- a/drivers/net/ethernet/sgi/Kconfig +++ b/drivers/net/ethernet/sgi/Kconfig @@ -22,7 +22,6 @@ config SGI_IOC3_ETH bool "SGI IOC3 Ethernet" depends on PCI && SGI_IP27 select CRC32 - select NET_CORE select MII ---help--- If you have a network (Ethernet) card of this type, say Y and read diff --git a/drivers/net/ethernet/sis/Kconfig b/drivers/net/ethernet/sis/Kconfig index f1135cc1bd4..68d052b09af 100644 --- a/drivers/net/ethernet/sis/Kconfig +++ b/drivers/net/ethernet/sis/Kconfig @@ -22,7 +22,6 @@ config SIS900 tristate "SiS 900/7016 PCI Fast Ethernet Adapter support" depends on PCI select CRC32 - select NET_CORE select MII ---help--- This is a driver for the Fast Ethernet PCI network cards based on @@ -39,7 +38,6 @@ config SIS190 tristate "SiS190/SiS191 gigabit ethernet support" depends on PCI select CRC32 - select NET_CORE select MII ---help--- Say Y here if you have a SiS 190 PCI Fast Ethernet adapter or diff --git a/drivers/net/ethernet/smsc/Kconfig b/drivers/net/ethernet/smsc/Kconfig index ff9e9947403..068fc44d37e 100644 --- a/drivers/net/ethernet/smsc/Kconfig +++ b/drivers/net/ethernet/smsc/Kconfig @@ -37,7 +37,6 @@ config SMC9194 config SMC91X tristate "SMC 91C9x/91C1xxx support" select CRC32 - select NET_CORE select MII depends on (ARM || M32R || SUPERH || MIPS || BLACKFIN || \ MN10300 || COLDFIRE || ARM64) @@ -57,7 +56,6 @@ config PCMCIA_SMC91C92 tristate "SMC 91Cxx PCMCIA support" depends on PCMCIA select CRC32 - select NET_CORE select MII ---help--- Say Y here if you intend to attach an SMC 91Cxx compatible PCMCIA @@ -70,7 +68,6 @@ config EPIC100 tristate "SMC EtherPower II" depends on PCI select CRC32 - select NET_CORE select MII ---help--- This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC, @@ -81,7 +78,6 @@ config EPIC100 config SMC911X tristate "SMSC LAN911[5678] support" select CRC32 - select NET_CORE select MII depends on (ARM || SUPERH || MN10300) ---help--- @@ -99,7 +95,6 @@ config SMSC911X tristate "SMSC LAN911x/LAN921x families embedded ethernet support" depends on HAS_IOMEM select CRC32 - select NET_CORE select MII select PHYLIB ---help--- diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig index 43c1f322332..6e52c0f74cd 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig @@ -1,7 +1,6 @@ config STMMAC_ETH tristate "STMicroelectronics 10/100/1000 Ethernet driver" depends on HAS_IOMEM && HAS_DMA - select NET_CORE select MII select PHYLIB select CRC32 diff --git a/drivers/net/ethernet/via/Kconfig b/drivers/net/ethernet/via/Kconfig index 6a87097d88c..8a049a2b447 100644 --- a/drivers/net/ethernet/via/Kconfig +++ b/drivers/net/ethernet/via/Kconfig @@ -21,7 +21,6 @@ config VIA_RHINE tristate "VIA Rhine support" depends on PCI select CRC32 - select NET_CORE select MII ---help--- If you have a VIA "Rhine" based network card (Rhine-I (VT86C100A), @@ -47,7 +46,6 @@ config VIA_VELOCITY depends on (PCI || USE_OF) select CRC32 select CRC_CCITT - select NET_CORE select MII ---help--- If you have a VIA "Velocity" based network card say Y here. diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index 287cc624b90..d84bfd4109a 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -67,7 +67,6 @@ config USB_KAWETH config USB_PEGASUS tristate "USB Pegasus/Pegasus-II based ethernet device support" - select NET_CORE select MII ---help--- Say Y here if you know you have Pegasus or Pegasus-II based adapter. @@ -83,7 +82,6 @@ config USB_PEGASUS config USB_RTL8150 tristate "USB RTL8150 based ethernet device support" - select NET_CORE select MII help Say Y here if you have RTL8150 based usb-ethernet adapter. @@ -95,7 +93,6 @@ config USB_RTL8150 config USB_RTL8152 tristate "Realtek RTL8152 Based USB 2.0 Ethernet Adapters" - select NET_CORE select MII help This option adds support for Realtek RTL8152 based USB 2.0 @@ -106,7 +103,6 @@ config USB_RTL8152 config USB_USBNET tristate "Multi-purpose USB Networking Framework" - select NET_CORE select MII ---help--- This driver supports several kinds of network links over USB, diff --git a/drivers/staging/silicom/Kconfig b/drivers/staging/silicom/Kconfig index eda2e7d7364..fc082db628e 100644 --- a/drivers/staging/silicom/Kconfig +++ b/drivers/staging/silicom/Kconfig @@ -32,7 +32,6 @@ config BPCTL depends on PCI && NET depends on m select SBYPASS - select NET_CORE select MII ---help--- If you have a network (Ethernet) controller of this type, say Y |