diff options
Diffstat (limited to 'include/asm-arm')
-rw-r--r-- | include/asm-arm/arch-at91rm9200/gpio.h | 1 | ||||
-rw-r--r-- | include/asm-arm/arch-ixp4xx/nas100d.h | 4 | ||||
-rw-r--r-- | include/asm-arm/arch-omap/io.h | 6 | ||||
-rw-r--r-- | include/asm-arm/arch-s3c2410/debug-macro.S | 6 | ||||
-rw-r--r-- | include/asm-arm/arch-s3c2410/h1940-latch.h | 64 | ||||
-rw-r--r-- | include/asm-arm/arch-s3c2410/hardware.h | 7 | ||||
-rw-r--r-- | include/asm-arm/arch-s3c2410/map.h | 38 | ||||
-rw-r--r-- | include/asm-arm/arch-s3c2410/regs-gpio.h | 22 | ||||
-rw-r--r-- | include/asm-arm/arch-s3c2410/regs-serial.h | 6 | ||||
-rw-r--r-- | include/asm-arm/arch-s3c2410/uncompress.h | 6 | ||||
-rw-r--r-- | include/asm-arm/checksum.h | 2 | ||||
-rw-r--r-- | include/asm-arm/mach/map.h | 1 | ||||
-rw-r--r-- | include/asm-arm/mman.h | 29 | ||||
-rw-r--r-- | include/asm-arm/mutex.h | 131 | ||||
-rw-r--r-- | include/asm-arm/pgtable.h | 1 | ||||
-rw-r--r-- | include/asm-arm/smp.h | 5 | ||||
-rw-r--r-- | include/asm-arm/unistd.h | 6 |
17 files changed, 225 insertions, 110 deletions
diff --git a/include/asm-arm/arch-at91rm9200/gpio.h b/include/asm-arm/arch-at91rm9200/gpio.h index 0f0a61e2f12..6176ab2dc41 100644 --- a/include/asm-arm/arch-at91rm9200/gpio.h +++ b/include/asm-arm/arch-at91rm9200/gpio.h @@ -183,6 +183,7 @@ extern int at91_set_B_periph(unsigned pin, int use_pullup); extern int at91_set_gpio_input(unsigned pin, int use_pullup); extern int at91_set_gpio_output(unsigned pin, int value); extern int at91_set_deglitch(unsigned pin, int is_on); +extern int at91_set_multi_drive(unsigned pin, int is_on); /* callable at any time */ extern int at91_set_gpio_value(unsigned pin, int value); diff --git a/include/asm-arm/arch-ixp4xx/nas100d.h b/include/asm-arm/arch-ixp4xx/nas100d.h index 51ac0180427..84467a5190d 100644 --- a/include/asm-arm/arch-ixp4xx/nas100d.h +++ b/include/asm-arm/arch-ixp4xx/nas100d.h @@ -19,8 +19,8 @@ #error "Do not include this directly, instead #include <asm/hardware.h>" #endif -#define NAS100D_SDA_PIN 6 -#define NAS100D_SCL_PIN 5 +#define NAS100D_SDA_PIN 5 +#define NAS100D_SCL_PIN 6 /* * NAS100D PCI IRQs diff --git a/include/asm-arm/arch-omap/io.h b/include/asm-arm/arch-omap/io.h index f5bcc9a1aed..b726acfcab1 100644 --- a/include/asm-arm/arch-omap/io.h +++ b/include/asm-arm/arch-omap/io.h @@ -116,7 +116,11 @@ typedef struct { volatile u32 offset[4096]; } __regbase32; ->offset[((vaddr)&4095)>>2] #define __REG32(paddr) __REGV32(io_p2v(paddr)) -extern void omap_map_common_io(void); +extern void omap1_map_common_io(void); +extern void omap1_init_common_hw(void); + +extern void omap2_map_common_io(void); +extern void omap2_init_common_hw(void); #else diff --git a/include/asm-arm/arch-s3c2410/debug-macro.S b/include/asm-arm/arch-s3c2410/debug-macro.S index abfbe45cd17..5f8223e700d 100644 --- a/include/asm-arm/arch-s3c2410/debug-macro.S +++ b/include/asm-arm/arch-s3c2410/debug-macro.S @@ -25,7 +25,7 @@ .macro addruart, rx mrc p15, 0, \rx, c1, c0 tst \rx, #1 - ldreq \rx, = S3C2410_PA_UART + ldreq \rx, = S3C24XX_PA_UART ldrne \rx, = S3C24XX_VA_UART #if CONFIG_DEBUG_S3C2410_UART != 0 add \rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C2410_UART) @@ -44,7 +44,7 @@ 1003: mrc p15, 0, \rd, c1, c0 tst \rd, #1 - addeq \rd, \rx, #(S3C2410_PA_GPIO - S3C2410_PA_UART) + addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART) addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART) bic \rd, \rd, #0xff000 ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ] @@ -75,7 +75,7 @@ 1003: mrc p15, 0, \rd, c1, c0 tst \rd, #1 - addeq \rd, \rx, #(S3C2410_PA_GPIO - S3C2410_PA_UART) + addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART) addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART) bic \rd, \rd, #0xff000 ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ] diff --git a/include/asm-arm/arch-s3c2410/h1940-latch.h b/include/asm-arm/arch-s3c2410/h1940-latch.h new file mode 100644 index 00000000000..c5802411f43 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/h1940-latch.h @@ -0,0 +1,64 @@ +/* linux/include/asm-arm/arch-s3c2410/h1940-latch.h + * + * (c) 2005 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * iPAQ H1940 series - latch definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_H1940_LATCH_H +#define __ASM_ARCH_H1940_LATCH_H + + +#ifndef __ASSEMBLY__ +#define H1940_LATCH ((void __iomem *)0xF8000000) +#else +#define H1940_LATCH 0xF8000000 +#endif + +#define H1940_PA_LATCH (S3C2410_CS2) + +/* SD layer latch */ + +#define H1940_LATCH_SDQ1 (1<<16) +#define H1940_LATCH_LCD_P1 (1<<17) +#define H1940_LATCH_LCD_P2 (1<<18) +#define H1940_LATCH_LCD_P3 (1<<19) +#define H1940_LATCH_MAX1698_nSHUTDOWN (1<<20) /* LCD backlight */ +#define H1940_LATCH_LED_RED (1<<21) +#define H1940_LATCH_SDQ7 (1<<22) +#define H1940_LATCH_USB_DP (1<<23) + +/* CPU layer latch */ + +#define H1940_LATCH_UDA_POWER (1<<24) +#define H1940_LATCH_AUDIO_POWER (1<<25) +#define H1940_LATCH_SM803_ENABLE (1<<26) +#define H1940_LATCH_LCD_P4 (1<<27) +#define H1940_LATCH_CPUQ5 (1<<28) /* untraced */ +#define H1940_LATCH_BLUETOOTH_POWER (1<<29) /* active high */ +#define H1940_LATCH_LED_GREEN (1<<30) +#define H1940_LATCH_LED_FLASH (1<<31) + +/* default settings */ + +#define H1940_LATCH_DEFAULT \ + H1940_LATCH_LCD_P4 | \ + H1940_LATCH_SM803_ENABLE | \ + H1940_LATCH_SDQ1 | \ + H1940_LATCH_LCD_P1 | \ + H1940_LATCH_LCD_P2 | \ + H1940_LATCH_LCD_P3 | \ + H1940_LATCH_MAX1698_nSHUTDOWN | \ + H1940_LATCH_CPUQ5 + +/* control functions */ + +extern void h1940_latch_control(unsigned int clear, unsigned int set); + +#endif /* __ASM_ARCH_H1940_LATCH_H */ diff --git a/include/asm-arm/arch-s3c2410/hardware.h b/include/asm-arm/arch-s3c2410/hardware.h index 1c9de29cafe..a2330bf8369 100644 --- a/include/asm-arm/arch-s3c2410/hardware.h +++ b/include/asm-arm/arch-s3c2410/hardware.h @@ -17,6 +17,7 @@ * 14-Sep-2004 BJD Added misccr and getpin to gpio * 01-Oct-2004 BJD Added the new gpio functions * 16-Oct-2004 BJD Removed the clock variables + * 15-Jan-2006 LCVR Added s3c2400_gpio_getirq() */ #ifndef __ASM_ARCH_HARDWARE_H @@ -55,6 +56,12 @@ extern unsigned int s3c2410_gpio_getcfg(unsigned int pin); extern int s3c2410_gpio_getirq(unsigned int pin); +#ifdef CONFIG_CPU_S3C2400 + +extern int s3c2400_gpio_getirq(unsigned int pin); + +#endif /* CONFIG_CPU_S3C2400 */ + /* s3c2410_gpio_irqfilter * * set the irq filtering on the given pin diff --git a/include/asm-arm/arch-s3c2410/map.h b/include/asm-arm/arch-s3c2410/map.h index 1833ea5c422..c380d264a84 100644 --- a/include/asm-arm/arch-s3c2410/map.h +++ b/include/asm-arm/arch-s3c2410/map.h @@ -14,6 +14,7 @@ * 06-Jan-2003 BJD Linux 2.6.0 version, moved bast specifics out * 10-Feb-2005 BJD Added CAMIF definition from guillaume.gourat@nexvision.tv * 10-Mar-2005 LCVR Added support to S3C2400, changed {VA,SZ} names + * 15-Jan-2006 LCVR Added S3C24XX_PA macros for common S3C24XX resources */ #ifndef __ASM_ARCH_MAP_H @@ -188,5 +189,42 @@ #define S3C2400_SDRAM_PA (S3C2400_CS6) +/* Use a single interface for common resources between S3C24XX cpus */ + +#ifdef CONFIG_CPU_S3C2400 +#define S3C24XX_PA_IRQ S3C2400_PA_IRQ +#define S3C24XX_PA_MEMCTRL S3C2400_PA_MEMCTRL +#define S3C24XX_PA_USBHOST S3C2400_PA_USBHOST +#define S3C24XX_PA_DMA S3C2400_PA_DMA +#define S3C24XX_PA_CLKPWR S3C2400_PA_CLKPWR +#define S3C24XX_PA_LCD S3C2400_PA_LCD +#define S3C24XX_PA_UART S3C2400_PA_UART +#define S3C24XX_PA_TIMER S3C2400_PA_TIMER +#define S3C24XX_PA_USBDEV S3C2400_PA_USBDEV +#define S3C24XX_PA_WATCHDOG S3C2400_PA_WATCHDOG +#define S3C24XX_PA_IIC S3C2400_PA_IIC +#define S3C24XX_PA_IIS S3C2400_PA_IIS +#define S3C24XX_PA_GPIO S3C2400_PA_GPIO +#define S3C24XX_PA_RTC S3C2400_PA_RTC +#define S3C24XX_PA_ADC S3C2400_PA_ADC +#define S3C24XX_PA_SPI S3C2400_PA_SPI +#else +#define S3C24XX_PA_IRQ S3C2410_PA_IRQ +#define S3C24XX_PA_MEMCTRL S3C2410_PA_MEMCTRL +#define S3C24XX_PA_USBHOST S3C2410_PA_USBHOST +#define S3C24XX_PA_DMA S3C2410_PA_DMA +#define S3C24XX_PA_CLKPWR S3C2410_PA_CLKPWR +#define S3C24XX_PA_LCD S3C2410_PA_LCD +#define S3C24XX_PA_UART S3C2410_PA_UART +#define S3C24XX_PA_TIMER S3C2410_PA_TIMER +#define S3C24XX_PA_USBDEV S3C2410_PA_USBDEV +#define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG +#define S3C24XX_PA_IIC S3C2410_PA_IIC +#define S3C24XX_PA_IIS S3C2410_PA_IIS +#define S3C24XX_PA_GPIO S3C2410_PA_GPIO +#define S3C24XX_PA_RTC S3C2410_PA_RTC +#define S3C24XX_PA_ADC S3C2410_PA_ADC +#define S3C24XX_PA_SPI S3C2410_PA_SPI +#endif #endif /* __ASM_ARCH_MAP_H */ diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h index 7f1be48ad67..9697f93afe7 100644 --- a/include/asm-arm/arch-s3c2410/regs-gpio.h +++ b/include/asm-arm/arch-s3c2410/regs-gpio.h @@ -22,6 +22,7 @@ * 28-Mar-2005 LCVR Fixed definition of GPB10 * 26-Oct-2005 BJD Added generic configuration types * 27-Nov-2005 LCVR Added definitions to S3C2400 registers + * 15-Jan-2006 LCVR Written S3C24XX_GPIO_BASE() macro */ @@ -39,6 +40,27 @@ #define S3C2410_GPIO_BANKG (32*6) #define S3C2410_GPIO_BANKH (32*7) +#ifdef CONFIG_CPU_S3C2400 +#define S3C24XX_GPIO_BASE(x) S3C2400_GPIO_BASE(x) +#define S3C24XX_MISCCR S3C2400_MISCCR +#else +#define S3C24XX_GPIO_BASE(x) S3C2410_GPIO_BASE(x) +#define S3C24XX_MISCCR S3C2410_MISCCR +#endif /* CONFIG_CPU_S3C2400 */ + + +/* S3C2400 doesn't have a 1:1 mapping to S3C2410 gpio base pins */ + +#define S3C2400_BANKNUM(pin) (((pin) & ~31) / 32) +#define S3C2400_BASEA2B(pin) ((((pin) & ~31) >> 2)) +#define S3C2400_BASEC2H(pin) ((S3C2400_BANKNUM(pin) * 10) + \ + (2 * (S3C2400_BANKNUM(pin)-2))) + +#define S3C2400_GPIO_BASE(pin) (pin < S3C2410_GPIO_BANKC ? \ + S3C2400_BASEA2B(pin)+S3C24XX_VA_GPIO : \ + S3C2400_BASEC2H(pin)+S3C24XX_VA_GPIO) + + #define S3C2410_GPIO_BASE(pin) ((((pin) & ~31) >> 1) + S3C24XX_VA_GPIO) #define S3C2410_GPIO_OFFSET(pin) ((pin) & 31) diff --git a/include/asm-arm/arch-s3c2410/regs-serial.h b/include/asm-arm/arch-s3c2410/regs-serial.h index ce1bbbaad6d..83b01254c4a 100644 --- a/include/asm-arm/arch-s3c2410/regs-serial.h +++ b/include/asm-arm/arch-s3c2410/regs-serial.h @@ -39,9 +39,9 @@ #define S3C24XX_VA_UART1 (S3C24XX_VA_UART + 0x4000 ) #define S3C24XX_VA_UART2 (S3C24XX_VA_UART + 0x8000 ) -#define S3C2410_PA_UART0 (S3C2410_PA_UART) -#define S3C2410_PA_UART1 (S3C2410_PA_UART + 0x4000 ) -#define S3C2410_PA_UART2 (S3C2410_PA_UART + 0x8000 ) +#define S3C2410_PA_UART0 (S3C24XX_PA_UART) +#define S3C2410_PA_UART1 (S3C24XX_PA_UART + 0x4000 ) +#define S3C2410_PA_UART2 (S3C24XX_PA_UART + 0x8000 ) #define S3C2410_URXH (0x24) #define S3C2410_UTXH (0x20) diff --git a/include/asm-arm/arch-s3c2410/uncompress.h b/include/asm-arm/arch-s3c2410/uncompress.h index ddd1578a7ee..4367ec054b5 100644 --- a/include/asm-arm/arch-s3c2410/uncompress.h +++ b/include/asm-arm/arch-s3c2410/uncompress.h @@ -35,13 +35,13 @@ #undef S3C2410_GPIOREG #undef S3C2410_WDOGREG -#define S3C2410_GPIOREG(x) ((S3C2410_PA_GPIO + (x))) -#define S3C2410_WDOGREG(x) ((S3C2410_PA_WATCHDOG + (x))) +#define S3C2410_GPIOREG(x) ((S3C24XX_PA_GPIO + (x))) +#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x))) /* how many bytes we allow into the FIFO at a time in FIFO mode */ #define FIFO_MAX (14) -#define uart_base S3C2410_PA_UART + (0x4000*CONFIG_S3C2410_LOWLEVEL_UART_PORT) +#define uart_base S3C24XX_PA_UART + (0x4000*CONFIG_S3C2410_LOWLEVEL_UART_PORT) static __inline__ void uart_wr(unsigned int reg, unsigned int val) diff --git a/include/asm-arm/checksum.h b/include/asm-arm/checksum.h index d4256d5f3a7..747bdd31a74 100644 --- a/include/asm-arm/checksum.h +++ b/include/asm-arm/checksum.h @@ -77,7 +77,7 @@ ip_fast_csum(unsigned char * iph, unsigned int ihl) mov %0, %0, lsr #16" : "=r" (sum), "=r" (iph), "=r" (ihl), "=r" (tmp1) : "1" (iph), "2" (ihl) - : "cc"); + : "cc", "memory"); return sum; } diff --git a/include/asm-arm/mach/map.h b/include/asm-arm/mach/map.h index 3351b77fab3..e8ea67c97c7 100644 --- a/include/asm-arm/mach/map.h +++ b/include/asm-arm/mach/map.h @@ -26,6 +26,7 @@ struct meminfo; #define MT_MEMORY 5 #define MT_ROM 6 #define MT_IXP2000_DEVICE 7 +#define MT_NONSHARED_DEVICE 8 extern void create_memmap_holes(struct meminfo *); extern void memtable_init(struct meminfo *); diff --git a/include/asm-arm/mman.h b/include/asm-arm/mman.h index f0bebca2ac2..54570d2e95b 100644 --- a/include/asm-arm/mman.h +++ b/include/asm-arm/mman.h @@ -1,19 +1,7 @@ #ifndef __ARM_MMAN_H__ #define __ARM_MMAN_H__ -#define PROT_READ 0x1 /* page can be read */ -#define PROT_WRITE 0x2 /* page can be written */ -#define PROT_EXEC 0x4 /* page can be executed */ -#define PROT_SEM 0x8 /* page may be used for atomic ops */ -#define PROT_NONE 0x0 /* page can not be accessed */ -#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */ -#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */ - -#define MAP_SHARED 0x01 /* Share changes */ -#define MAP_PRIVATE 0x02 /* Changes are private */ -#define MAP_TYPE 0x0f /* Mask for type of mapping */ -#define MAP_FIXED 0x10 /* Interpret addr exactly */ -#define MAP_ANONYMOUS 0x20 /* don't use a file */ +#include <asm-generic/mman.h> #define MAP_GROWSDOWN 0x0100 /* stack-like segment */ #define MAP_DENYWRITE 0x0800 /* ETXTBSY */ @@ -23,22 +11,7 @@ #define MAP_POPULATE 0x8000 /* populate (prefault) page tables */ #define MAP_NONBLOCK 0x10000 /* do not block on IO */ -#define MS_ASYNC 1 /* sync memory asynchronously */ -#define MS_INVALIDATE 2 /* invalidate the caches */ -#define MS_SYNC 4 /* synchronous memory sync */ - #define MCL_CURRENT 1 /* lock all current mappings */ #define MCL_FUTURE 2 /* lock all future mappings */ -#define MADV_NORMAL 0x0 /* default page-in behavior */ -#define MADV_RANDOM 0x1 /* page-in minimum required */ -#define MADV_SEQUENTIAL 0x2 /* read-ahead aggressively */ -#define MADV_WILLNEED 0x3 /* pre-fault pages */ -#define MADV_DONTNEED 0x4 /* discard these pages */ -#define MADV_REMOVE 0x5 /* remove these pages & resources */ - -/* compatibility flags */ -#define MAP_ANON MAP_ANONYMOUS -#define MAP_FILE 0 - #endif /* __ARM_MMAN_H__ */ diff --git a/include/asm-arm/mutex.h b/include/asm-arm/mutex.h index 6caa59f1f59..cb29d84e690 100644 --- a/include/asm-arm/mutex.h +++ b/include/asm-arm/mutex.h @@ -23,72 +23,71 @@ * simply bail out immediately through the slow path where the lock will be * reattempted until it succeeds. */ -#define __mutex_fastpath_lock(count, fail_fn) \ -do { \ - int __ex_flag, __res; \ - \ - typecheck(atomic_t *, count); \ - typecheck_fn(fastcall void (*)(atomic_t *), fail_fn); \ - \ - __asm__ ( \ - "ldrex %0, [%2] \n" \ - "sub %0, %0, #1 \n" \ - "strex %1, %0, [%2] \n" \ - \ - : "=&r" (__res), "=&r" (__ex_flag) \ - : "r" (&(count)->counter) \ - : "cc","memory" ); \ - \ - if (unlikely(__res || __ex_flag)) \ - fail_fn(count); \ -} while (0) - -#define __mutex_fastpath_lock_retval(count, fail_fn) \ -({ \ - int __ex_flag, __res; \ - \ - typecheck(atomic_t *, count); \ - typecheck_fn(fastcall int (*)(atomic_t *), fail_fn); \ - \ - __asm__ ( \ - "ldrex %0, [%2] \n" \ - "sub %0, %0, #1 \n" \ - "strex %1, %0, [%2] \n" \ - \ - : "=&r" (__res), "=&r" (__ex_flag) \ - : "r" (&(count)->counter) \ - : "cc","memory" ); \ - \ - __res |= __ex_flag; \ - if (unlikely(__res != 0)) \ - __res = fail_fn(count); \ - __res; \ -}) +static inline void +__mutex_fastpath_lock(atomic_t *count, fastcall void (*fail_fn)(atomic_t *)) +{ + int __ex_flag, __res; + + __asm__ ( + + "ldrex %0, [%2] \n\t" + "sub %0, %0, #1 \n\t" + "strex %1, %0, [%2] " + + : "=&r" (__res), "=&r" (__ex_flag) + : "r" (&(count)->counter) + : "cc","memory" ); + + __res |= __ex_flag; + if (unlikely(__res != 0)) + fail_fn(count); +} + +static inline int +__mutex_fastpath_lock_retval(atomic_t *count, fastcall int (*fail_fn)(atomic_t *)) +{ + int __ex_flag, __res; + + __asm__ ( + + "ldrex %0, [%2] \n\t" + "sub %0, %0, #1 \n\t" + "strex %1, %0, [%2] " + + : "=&r" (__res), "=&r" (__ex_flag) + : "r" (&(count)->counter) + : "cc","memory" ); + + __res |= __ex_flag; + if (unlikely(__res != 0)) + __res = fail_fn(count); + return __res; +} /* * Same trick is used for the unlock fast path. However the original value, * rather than the result, is used to test for success in order to have * better generated assembly. */ -#define __mutex_fastpath_unlock(count, fail_fn) \ -do { \ - int __ex_flag, __res, __orig; \ - \ - typecheck(atomic_t *, count); \ - typecheck_fn(fastcall void (*)(atomic_t *), fail_fn); \ - \ - __asm__ ( \ - "ldrex %0, [%3] \n" \ - "add %1, %0, #1 \n" \ - "strex %2, %1, [%3] \n" \ - \ - : "=&r" (__orig), "=&r" (__res), "=&r" (__ex_flag) \ - : "r" (&(count)->counter) \ - : "cc","memory" ); \ - \ - if (unlikely(__orig || __ex_flag)) \ - fail_fn(count); \ -} while (0) +static inline void +__mutex_fastpath_unlock(atomic_t *count, fastcall void (*fail_fn)(atomic_t *)) +{ + int __ex_flag, __res, __orig; + + __asm__ ( + + "ldrex %0, [%3] \n\t" + "add %1, %0, #1 \n\t" + "strex %2, %1, [%3] " + + : "=&r" (__orig), "=&r" (__res), "=&r" (__ex_flag) + : "r" (&(count)->counter) + : "cc","memory" ); + + __orig |= __ex_flag; + if (unlikely(__orig != 0)) + fail_fn(count); +} /* * If the unlock was done on a contended lock, or if the unlock simply fails @@ -110,12 +109,12 @@ __mutex_fastpath_trylock(atomic_t *count, int (*fail_fn)(atomic_t *)) __asm__ ( - "1: ldrex %0, [%3] \n" - "subs %1, %0, #1 \n" - "strexeq %2, %1, [%3] \n" - "movlt %0, #0 \n" - "cmpeq %2, #0 \n" - "bgt 1b \n" + "1: ldrex %0, [%3] \n\t" + "subs %1, %0, #1 \n\t" + "strexeq %2, %1, [%3] \n\t" + "movlt %0, #0 \n\t" + "cmpeq %2, #0 \n\t" + "bgt 1b " : "=&r" (__orig), "=&r" (__res), "=&r" (__ex_flag) : "r" (&count->counter) diff --git a/include/asm-arm/pgtable.h b/include/asm-arm/pgtable.h index 5a0d19b466b..70e00d08345 100644 --- a/include/asm-arm/pgtable.h +++ b/include/asm-arm/pgtable.h @@ -168,6 +168,7 @@ extern void __pgd_error(const char *file, int line, unsigned long val); #define PMD_SECT_WB (PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE) #define PMD_SECT_MINICACHE (PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE) #define PMD_SECT_WBWA (PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE) +#define PMD_SECT_NONSHARED_DEV (PMD_SECT_TEX(2)) /* * - coarse table (not used) diff --git a/include/asm-arm/smp.h b/include/asm-arm/smp.h index 5a72e50ca9f..fe45f7f6122 100644 --- a/include/asm-arm/smp.h +++ b/include/asm-arm/smp.h @@ -42,6 +42,11 @@ extern void show_ipi_list(struct seq_file *p); asmlinkage void do_IPI(struct pt_regs *regs); /* + * Setup the SMP cpu_possible_map + */ +extern void smp_init_cpus(void); + +/* * Move global data into per-processor storage. */ extern void smp_store_cpu_info(unsigned int cpuid); diff --git a/include/asm-arm/unistd.h b/include/asm-arm/unistd.h index 77430d6178a..8f331bbd39a 100644 --- a/include/asm-arm/unistd.h +++ b/include/asm-arm/unistd.h @@ -309,7 +309,7 @@ #define __NR_mq_getsetattr (__NR_SYSCALL_BASE+279) #define __NR_waitid (__NR_SYSCALL_BASE+280) -#if 0 /* reserve these for un-muxing socketcall */ +#if defined(__ARM_EABI__) /* reserve these for un-muxing socketcall */ #define __NR_socket (__NR_SYSCALL_BASE+281) #define __NR_bind (__NR_SYSCALL_BASE+282) #define __NR_connect (__NR_SYSCALL_BASE+283) @@ -329,7 +329,7 @@ #define __NR_recvmsg (__NR_SYSCALL_BASE+297) #endif -#if 0 /* reserve these for un-muxing ipc */ +#if defined(__ARM_EABI__) /* reserve these for un-muxing ipc */ #define __NR_semop (__NR_SYSCALL_BASE+298) #define __NR_semget (__NR_SYSCALL_BASE+299) #define __NR_semctl (__NR_SYSCALL_BASE+300) @@ -347,7 +347,7 @@ #define __NR_request_key (__NR_SYSCALL_BASE+310) #define __NR_keyctl (__NR_SYSCALL_BASE+311) -#if 0 /* reserved for un-muxing ipc */ +#if defined(__ARM_EABI__) /* reserved for un-muxing ipc */ #define __NR_semtimedop (__NR_SYSCALL_BASE+312) #endif |