summaryrefslogtreecommitdiffstats
path: root/include/asm-ppc/ibm_ocp.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-ppc/ibm_ocp.h')
-rw-r--r--include/asm-ppc/ibm_ocp.h204
1 files changed, 0 insertions, 204 deletions
diff --git a/include/asm-ppc/ibm_ocp.h b/include/asm-ppc/ibm_ocp.h
deleted file mode 100644
index ddce616f765..00000000000
--- a/include/asm-ppc/ibm_ocp.h
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- * ibm_ocp.h
- *
- * (c) Benjamin Herrenschmidt (benh@kernel.crashing.org)
- * Mipsys - France
- *
- * Derived from work (c) Armin Kuster akuster@pacbell.net
- *
- * Additional support and port to 2.6 LDM/sysfs by
- * Matt Porter <mporter@kernel.crashing.org>
- * Copyright 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-#ifdef __KERNEL__
-#ifndef __IBM_OCP_H__
-#define __IBM_OCP_H__
-
-#include <asm/types.h>
-
-/*
- * IBM 4xx OCP system information
- */
-struct ocp_sys_info_data {
- int opb_bus_freq; /* OPB Bus Frequency (Hz) */
- int ebc_bus_freq; /* EBC Bus Frequency (Hz) */
-};
-
-extern struct ocp_sys_info_data ocp_sys_info;
-
-/*
- * EMAC additional data and sysfs support
- *
- * Note about mdio_idx: When you have a zmii, it's usually
- * not necessary, it covers the case of the 405EP which has
- * the MDIO lines on EMAC0 only
- *
- * Note about phy_map: Per EMAC map of PHY ids which should
- * be probed by emac_probe. Different EMACs can have
- * overlapping maps.
- *
- * Note, this map uses inverse logic for bits:
- * 0 - id should be probed
- * 1 - id should be ignored
- *
- * Default value of 0x00000000 - will result in usual
- * auto-detection logic.
- *
- */
-
-struct ocp_func_emac_data {
- int rgmii_idx; /* RGMII device index or -1 */
- int rgmii_mux; /* RGMII input of this EMAC */
- int zmii_idx; /* ZMII device index or -1 */
- int zmii_mux; /* ZMII input of this EMAC */
- int mal_idx; /* MAL device index */
- int mal_rx_chan; /* MAL rx channel number */
- int mal_tx_chan; /* MAL tx channel number */
- int wol_irq; /* WOL interrupt */
- int mdio_idx; /* EMAC idx of MDIO master or -1 */
- int tah_idx; /* TAH device index or -1 */
- int phy_mode; /* PHY type or configurable mode */
- u8 mac_addr[6]; /* EMAC mac address */
- u32 phy_map; /* EMAC phy map */
- u32 phy_feat_exc; /* Excluded PHY features */
-};
-
-/* Sysfs support */
-#define OCP_SYSFS_EMAC_DATA() \
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, rgmii_idx) \
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, rgmii_mux) \
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, zmii_idx) \
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, zmii_mux) \
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mal_idx) \
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mal_rx_chan) \
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mal_tx_chan) \
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, wol_irq) \
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mdio_idx) \
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, tah_idx) \
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, phy_mode) \
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "0x%08x\n", emac, phy_map) \
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "0x%08x\n", emac, phy_feat_exc)\
- \
-void ocp_show_emac_data(struct device *dev) \
-{ \
- device_create_file(dev, &dev_attr_emac_rgmii_idx); \
- device_create_file(dev, &dev_attr_emac_rgmii_mux); \
- device_create_file(dev, &dev_attr_emac_zmii_idx); \
- device_create_file(dev, &dev_attr_emac_zmii_mux); \
- device_create_file(dev, &dev_attr_emac_mal_idx); \
- device_create_file(dev, &dev_attr_emac_mal_rx_chan); \
- device_create_file(dev, &dev_attr_emac_mal_tx_chan); \
- device_create_file(dev, &dev_attr_emac_wol_irq); \
- device_create_file(dev, &dev_attr_emac_mdio_idx); \
- device_create_file(dev, &dev_attr_emac_tah_idx); \
- device_create_file(dev, &dev_attr_emac_phy_mode); \
- device_create_file(dev, &dev_attr_emac_phy_map); \
- device_create_file(dev, &dev_attr_emac_phy_feat_exc); \
-}
-
-/*
- * PHY mode settings (EMAC <-> ZMII/RGMII bridge <-> PHY)
- */
-#define PHY_MODE_NA 0
-#define PHY_MODE_MII 1
-#define PHY_MODE_RMII 2
-#define PHY_MODE_SMII 3
-#define PHY_MODE_RGMII 4
-#define PHY_MODE_TBI 5
-#define PHY_MODE_GMII 6
-#define PHY_MODE_RTBI 7
-#define PHY_MODE_SGMII 8
-
-#ifdef CONFIG_40x
-/*
- * Helper function to copy MAC addresses from the bd_t to OCP EMAC
- * additions.
- *
- * The range of EMAC indices (inclusive) to be copied are the arguments.
- */
-static inline void ibm_ocp_set_emac(int start, int end)
-{
- int i;
- struct ocp_def *def;
-
- /* Copy MAC addresses to EMAC additions */
- for (i=start; i<=end; i++) {
- def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, i);
- if (i == 0)
- memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
- __res.bi_enetaddr, 6);
-#if defined(CONFIG_405EP) || defined(CONFIG_44x)
- else if (i == 1)
- memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
- __res.bi_enet1addr, 6);
-#endif
-#if defined(CONFIG_440GX)
- else if (i == 2)
- memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
- __res.bi_enet2addr, 6);
- else if (i == 3)
- memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
- __res.bi_enet3addr, 6);
-#endif
- }
-}
-#endif
-
-/*
- * MAL additional data and sysfs support
- */
-struct ocp_func_mal_data {
- int num_tx_chans; /* Number of TX channels */
- int num_rx_chans; /* Number of RX channels */
- int txeob_irq; /* TX End Of Buffer IRQ */
- int rxeob_irq; /* RX End Of Buffer IRQ */
- int txde_irq; /* TX Descriptor Error IRQ */
- int rxde_irq; /* RX Descriptor Error IRQ */
- int serr_irq; /* MAL System Error IRQ */
- int dcr_base; /* MALx_CFG DCR number */
-};
-
-#define OCP_SYSFS_MAL_DATA() \
-OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, num_tx_chans) \
-OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, num_rx_chans) \
-OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, txeob_irq) \
-OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, rxeob_irq) \
-OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, txde_irq) \
-OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, rxde_irq) \
-OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, serr_irq) \
-OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, dcr_base) \
- \
-void ocp_show_mal_data(struct device *dev) \
-{ \
- device_create_file(dev, &dev_attr_mal_num_tx_chans); \
- device_create_file(dev, &dev_attr_mal_num_rx_chans); \
- device_create_file(dev, &dev_attr_mal_txeob_irq); \
- device_create_file(dev, &dev_attr_mal_rxeob_irq); \
- device_create_file(dev, &dev_attr_mal_txde_irq); \
- device_create_file(dev, &dev_attr_mal_rxde_irq); \
- device_create_file(dev, &dev_attr_mal_serr_irq); \
- device_create_file(dev, &dev_attr_mal_dcr_base); \
-}
-
-/*
- * IIC additional data and sysfs support
- */
-struct ocp_func_iic_data {
- int fast_mode; /* IIC fast mode enabled */
-};
-
-#define OCP_SYSFS_IIC_DATA() \
-OCP_SYSFS_ADDTL(struct ocp_func_iic_data, "%d\n", iic, fast_mode) \
- \
-void ocp_show_iic_data(struct device *dev) \
-{ \
- device_create_file(dev, &dev_attr_iic_fast_mode); \
-}
-#endif /* __IBM_OCP_H__ */
-#endif /* __KERNEL__ */