1 files changed, 89 insertions, 0 deletions
diff --git a/include/linux/phy/omap_control_phy.h b/include/linux/phy/omap_control_phy.h
new file mode 100644
index 00000000000..5450403c754
--- /dev/null
+++ b/include/linux/phy/omap_control_phy.h
@@ -0,0 +1,89 @@
+/*
+ * omap_control_phy.h - Header file for the PHY part of control module.
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __OMAP_CONTROL_PHY_H__
+#define __OMAP_CONTROL_PHY_H__
+
+enum omap_control_phy_type {
+	OMAP_CTRL_TYPE_OTGHS = 1,	/* Mailbox OTGHS_CONTROL */
+	OMAP_CTRL_TYPE_USB2,	/* USB2_PHY, power down in CONTROL_DEV_CONF */
+	OMAP_CTRL_TYPE_PIPE3,	/* PIPE3 PHY, DPLL & seperate Rx/Tx power */
+	OMAP_CTRL_TYPE_DRA7USB2, /* USB2 PHY, power and power_aux e.g. DRA7 */
+	OMAP_CTRL_TYPE_AM437USB2, /* USB2 PHY, power e.g. AM437x */
+};
+
+struct omap_control_phy {
+	struct device *dev;
+
+	u32 __iomem *otghs_control;
+	u32 __iomem *power;
+	u32 __iomem *power_aux;
+
+	struct clk *sys_clk;
+
+	enum omap_control_phy_type type;
+};
+
+enum omap_control_usb_mode {
+	USB_MODE_UNDEFINED = 0,
+	USB_MODE_HOST,
+	USB_MODE_DEVICE,
+	USB_MODE_DISCONNECT,
+};
+
+#define	OMAP_CTRL_DEV_PHY_PD		BIT(0)
+
+#define	OMAP_CTRL_DEV_AVALID		BIT(0)
+#define	OMAP_CTRL_DEV_BVALID		BIT(1)
+#define	OMAP_CTRL_DEV_VBUSVALID		BIT(2)
+#define	OMAP_CTRL_DEV_SESSEND		BIT(3)
+#define	OMAP_CTRL_DEV_IDDIG		BIT(4)
+
+#define	OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK		0x003FC000
+#define	OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT	0xE
+
+#define	OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK	0xFFC00000
+#define	OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT	0x16
+
+#define	OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON	0x3
+#define	OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF	0x0
+
+#define OMAP_CTRL_USB2_PHY_PD		BIT(28)
+
+#define AM437X_CTRL_USB2_PHY_PD		BIT(0)
+#define AM437X_CTRL_USB2_OTG_PD		BIT(1)
+#define AM437X_CTRL_USB2_OTGVDET_EN	BIT(19)
+#define AM437X_CTRL_USB2_OTGSESSEND_EN	BIT(20)
+
+#if IS_ENABLED(CONFIG_OMAP_CONTROL_PHY)
+void omap_control_phy_power(struct device *dev, int on);
+void omap_control_usb_set_mode(struct device *dev,
+			       enum omap_control_usb_mode mode);
+#else
+
+static inline void omap_control_phy_power(struct device *dev, int on)
+{
+}
+
+static inline void omap_control_usb_set_mode(struct device *dev,
+	enum omap_control_usb_mode mode)
+{
+}
+#endif
+
+#endif	/* __OMAP_CONTROL_PHY_H__ */