diff options
Diffstat (limited to 'include/linux/pinctrl')
| -rw-r--r-- | include/linux/pinctrl/pinctrl-state.h | 15 |
1 files changed, 10 insertions, 5 deletions
diff --git a/include/linux/pinctrl/pinctrl-state.h b/include/linux/pinctrl/pinctrl-state.h index 634608dc6c8..b5919f8e6d1 100644 --- a/include/linux/pinctrl/pinctrl-state.h +++ b/include/linux/pinctrl/pinctrl-state.h @@ -6,13 +6,18 @@ * @PINCTRL_STATE_DEFAULT: the state the pinctrl handle shall be put * into as default, usually this means the pins are up and ready to * be used by the device driver. This state is commonly used by - * hogs to configure muxing and pins at boot. + * hogs to configure muxing and pins at boot, and also as a state + * to go into when returning from sleep and idle in + * .pm_runtime_resume() or ordinary .resume() for example. * @PINCTRL_STATE_IDLE: the state the pinctrl handle shall be put into - * when the pins are idle. Could typically be set from a - * pm_runtime_suspend() operation. + * when the pins are idle. This is a state where the system is relaxed + * but not fully sleeping - some power may be on but clocks gated for + * example. Could typically be set from a pm_runtime_suspend() or + * pm_runtime_idle() operation. * @PINCTRL_STATE_SLEEP: the state the pinctrl handle shall be put into - * when the pins are sleeping. Could typically be set from a - * common suspend() function. + * when the pins are sleeping. This is a state where the system is in + * its lowest sleep state. Could typically be set from an + * ordinary .suspend() function. */ #define PINCTRL_STATE_DEFAULT "default" #define PINCTRL_STATE_IDLE "idle" |