diff options
Diffstat (limited to 'include/linux/spi/spi.h')
| -rw-r--r-- | include/linux/spi/spi.h | 34 |
1 files changed, 10 insertions, 24 deletions
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index a0faa18f7b1..c47c4b4da97 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -80,6 +80,8 @@ struct spi_device { #define SPI_LSB_FIRST 0x08 /* per-word bits-on-wire */ #define SPI_3WIRE 0x10 /* SI/SO signals shared */ #define SPI_LOOP 0x20 /* loopback mode */ +#define SPI_NO_CS 0x40 /* 1 dev/bus, no chipselect */ +#define SPI_READY 0x80 /* slave pulls low to pause */ u8 bits_per_word; int irq; void *controller_state; @@ -245,6 +247,13 @@ struct spi_master { */ u16 dma_alignment; + /* spi_device.mode flags understood by this controller driver */ + u16 mode_bits; + + /* other constraints relevant to this driver */ + u16 flags; +#define SPI_MASTER_HALF_DUPLEX BIT(0) /* can't do full duplex */ + /* Setup mode and clock, etc (spi driver may call many times). * * IMPORTANT: this may be called when transfers to another @@ -523,30 +532,7 @@ static inline void spi_message_free(struct spi_message *m) kfree(m); } -/** - * spi_setup - setup SPI mode and clock rate - * @spi: the device whose settings are being modified - * Context: can sleep, and no requests are queued to the device - * - * SPI protocol drivers may need to update the transfer mode if the - * device doesn't work with its default. They may likewise need - * to update clock rates or word sizes from initial values. This function - * changes those settings, and must be called from a context that can sleep. - * Except for SPI_CS_HIGH, which takes effect immediately, the changes take - * effect the next time the device is selected and data is transferred to - * or from it. When this function returns, the spi device is deselected. - * - * Note that this call will fail if the protocol driver specifies an option - * that the underlying controller or its driver does not support. For - * example, not all hardware supports wire transfers using nine bit words, - * LSB-first wire encoding, or active-high chipselects. - */ -static inline int -spi_setup(struct spi_device *spi) -{ - return spi->master->setup(spi); -} - +extern int spi_setup(struct spi_device *spi); /** * spi_async - asynchronous SPI transfer |