diff options
Diffstat (limited to 'include/linux')
-rw-r--r-- | include/linux/gpio_keys.h | 48 | ||||
-rw-r--r-- | include/linux/i2c/atmel_mxt_ts.h | 27 | ||||
-rw-r--r-- | include/linux/input-polldev.h | 3 | ||||
-rw-r--r-- | include/linux/input/pixcir_ts.h | 44 | ||||
-rw-r--r-- | include/linux/input/touchscreen.h | 22 | ||||
-rw-r--r-- | include/linux/platform_data/omap4-keypad.h | 13 |
6 files changed, 107 insertions, 50 deletions
diff --git a/include/linux/gpio_keys.h b/include/linux/gpio_keys.h index a7e977ff4ab..8b622468952 100644 --- a/include/linux/gpio_keys.h +++ b/include/linux/gpio_keys.h @@ -3,29 +3,53 @@ struct device; +/** + * struct gpio_keys_button - configuration parameters + * @code: input event code (KEY_*, SW_*) + * @gpio: %-1 if this key does not support gpio + * @active_low: %true indicates that button is considered + * depressed when gpio is low + * @desc: label that will be attached to button's gpio + * @type: input event type (%EV_KEY, %EV_SW, %EV_ABS) + * @wakeup: configure the button as a wake-up source + * @debounce_interval: debounce ticks interval in msecs + * @can_disable: %true indicates that userspace is allowed to + * disable button via sysfs + * @value: axis value for %EV_ABS + * @irq: Irq number in case of interrupt keys + */ struct gpio_keys_button { - /* Configuration parameters */ - unsigned int code; /* input event code (KEY_*, SW_*) */ - int gpio; /* -1 if this key does not support gpio */ + unsigned int code; + int gpio; int active_low; const char *desc; - unsigned int type; /* input event type (EV_KEY, EV_SW, EV_ABS) */ - int wakeup; /* configure the button as a wake-up source */ - int debounce_interval; /* debounce ticks interval in msecs */ + unsigned int type; + int wakeup; + int debounce_interval; bool can_disable; - int value; /* axis value for EV_ABS */ - unsigned int irq; /* Irq number in case of interrupt keys */ + int value; + unsigned int irq; }; +/** + * struct gpio_keys_platform_data - platform data for gpio_keys driver + * @buttons: pointer to array of &gpio_keys_button structures + * describing buttons attached to the device + * @nbuttons: number of elements in @buttons array + * @poll_interval: polling interval in msecs - for polling driver only + * @rep: enable input subsystem auto repeat + * @enable: platform hook for enabling the device + * @disable: platform hook for disabling the device + * @name: input device name + */ struct gpio_keys_platform_data { struct gpio_keys_button *buttons; int nbuttons; - unsigned int poll_interval; /* polling interval in msecs - - for polling driver only */ - unsigned int rep:1; /* enable input subsystem auto repeat */ + unsigned int poll_interval; + unsigned int rep:1; int (*enable)(struct device *dev); void (*disable)(struct device *dev); - const char *name; /* input device name */ + const char *name; }; #endif diff --git a/include/linux/i2c/atmel_mxt_ts.h b/include/linux/i2c/atmel_mxt_ts.h index 99e379b7439..3891dc1de21 100644 --- a/include/linux/i2c/atmel_mxt_ts.h +++ b/include/linux/i2c/atmel_mxt_ts.h @@ -15,35 +15,14 @@ #include <linux/types.h> -/* For key_map array */ -#define MXT_NUM_GPIO 4 - -/* Orient */ -#define MXT_NORMAL 0x0 -#define MXT_DIAGONAL 0x1 -#define MXT_HORIZONTAL_FLIP 0x2 -#define MXT_ROTATED_90_COUNTER 0x3 -#define MXT_VERTICAL_FLIP 0x4 -#define MXT_ROTATED_90 0x5 -#define MXT_ROTATED_180 0x6 -#define MXT_DIAGONAL_COUNTER 0x7 - /* The platform data for the Atmel maXTouch touchscreen driver */ struct mxt_platform_data { const u8 *config; size_t config_length; - - unsigned int x_line; - unsigned int y_line; - unsigned int x_size; - unsigned int y_size; - unsigned int blen; - unsigned int threshold; - unsigned int voltage; - unsigned char orient; + u32 config_crc; unsigned long irqflags; - bool is_tp; - const unsigned int key_map[MXT_NUM_GPIO]; + u8 t19_num_keys; + const unsigned int *t19_keymap; }; #endif /* __LINUX_ATMEL_MXT_TS_H */ diff --git a/include/linux/input-polldev.h b/include/linux/input-polldev.h index ce0b72464eb..2465182670d 100644 --- a/include/linux/input-polldev.h +++ b/include/linux/input-polldev.h @@ -48,9 +48,12 @@ struct input_polled_dev { /* private: */ struct delayed_work work; + + bool devres_managed; }; struct input_polled_dev *input_allocate_polled_device(void); +struct input_polled_dev *devm_input_allocate_polled_device(struct device *dev); void input_free_polled_device(struct input_polled_dev *dev); int input_register_polled_device(struct input_polled_dev *dev); void input_unregister_polled_device(struct input_polled_dev *dev); diff --git a/include/linux/input/pixcir_ts.h b/include/linux/input/pixcir_ts.h index 7163d91c037..160cf353aa3 100644 --- a/include/linux/input/pixcir_ts.h +++ b/include/linux/input/pixcir_ts.h @@ -1,10 +1,52 @@ #ifndef _PIXCIR_I2C_TS_H #define _PIXCIR_I2C_TS_H +/* + * Register map + */ +#define PIXCIR_REG_POWER_MODE 51 +#define PIXCIR_REG_INT_MODE 52 + +/* + * Power modes: + * active: max scan speed + * idle: lower scan speed with automatic transition to active on touch + * halt: datasheet says sleep but this is more like halt as the chip + * clocks are cut and it can only be brought out of this mode + * using the RESET pin. + */ +enum pixcir_power_mode { + PIXCIR_POWER_ACTIVE, + PIXCIR_POWER_IDLE, + PIXCIR_POWER_HALT, +}; + +#define PIXCIR_POWER_MODE_MASK 0x03 +#define PIXCIR_POWER_ALLOW_IDLE (1UL << 2) + +/* + * Interrupt modes: + * periodical: interrupt is asserted periodicaly + * diff coordinates: interrupt is asserted when coordinates change + * level on touch: interrupt level asserted during touch + * pulse on touch: interrupt pulse asserted druing touch + * + */ +enum pixcir_int_mode { + PIXCIR_INT_PERIODICAL, + PIXCIR_INT_DIFF_COORD, + PIXCIR_INT_LEVEL_TOUCH, + PIXCIR_INT_PULSE_TOUCH, +}; + +#define PIXCIR_INT_MODE_MASK 0x03 +#define PIXCIR_INT_ENABLE (1UL << 3) +#define PIXCIR_INT_POL_HIGH (1UL << 2) + struct pixcir_ts_platform_data { - int (*attb_read_val)(void); int x_max; int y_max; + int gpio_attb; /* GPIO connected to ATTB line */ }; #endif diff --git a/include/linux/input/touchscreen.h b/include/linux/input/touchscreen.h new file mode 100644 index 00000000000..08a5ef6e8f2 --- /dev/null +++ b/include/linux/input/touchscreen.h @@ -0,0 +1,22 @@ +/* + * Copyright (c) 2014 Sebastian Reichel <sre@kernel.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#ifndef _TOUCHSCREEN_H +#define _TOUCHSCREEN_H + +#include <linux/input.h> + +#ifdef CONFIG_OF +void touchscreen_parse_of_params(struct input_dev *dev); +#else +static inline void touchscreen_parse_of_params(struct input_dev *dev) +{ +} +#endif + +#endif diff --git a/include/linux/platform_data/omap4-keypad.h b/include/linux/platform_data/omap4-keypad.h deleted file mode 100644 index 4eef5fb05a1..00000000000 --- a/include/linux/platform_data/omap4-keypad.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __LINUX_INPUT_OMAP4_KEYPAD_H -#define __LINUX_INPUT_OMAP4_KEYPAD_H - -#include <linux/input/matrix_keypad.h> - -struct omap4_keypad_platform_data { - const struct matrix_keymap_data *keymap_data; - - u8 rows; - u8 cols; -}; - -#endif /* __LINUX_INPUT_OMAP4_KEYPAD_H */ |