summaryrefslogtreecommitdiffstats
path: root/include/net/cfg80211.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/net/cfg80211.h')
-rw-r--r--include/net/cfg80211.h390
1 files changed, 245 insertions, 145 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index d17f47fc9e3..92cf1c2c30c 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -20,11 +20,6 @@
#include <linux/ieee80211.h>
#include <net/regulatory.h>
-/* remove once we remove the wext stuff */
-#include <net/iw_handler.h>
-#include <linux/wireless.h>
-
-
/**
* DOC: Introduction
*
@@ -339,6 +334,36 @@ struct survey_info {
};
/**
+ * struct cfg80211_crypto_settings - Crypto settings
+ * @wpa_versions: indicates which, if any, WPA versions are enabled
+ * (from enum nl80211_wpa_versions)
+ * @cipher_group: group key cipher suite (or 0 if unset)
+ * @n_ciphers_pairwise: number of AP supported unicast ciphers
+ * @ciphers_pairwise: unicast key cipher suites
+ * @n_akm_suites: number of AKM suites
+ * @akm_suites: AKM suites
+ * @control_port: Whether user space controls IEEE 802.1X port, i.e.,
+ * sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is
+ * required to assume that the port is unauthorized until authorized by
+ * user space. Otherwise, port is marked authorized by default.
+ * @control_port_ethertype: the control port protocol that should be
+ * allowed through even on unauthorized ports
+ * @control_port_no_encrypt: TRUE to prevent encryption of control port
+ * protocol frames.
+ */
+struct cfg80211_crypto_settings {
+ u32 wpa_versions;
+ u32 cipher_group;
+ int n_ciphers_pairwise;
+ u32 ciphers_pairwise[NL80211_MAX_NR_CIPHER_SUITES];
+ int n_akm_suites;
+ u32 akm_suites[NL80211_MAX_NR_AKM_SUITES];
+ bool control_port;
+ __be16 control_port_ethertype;
+ bool control_port_no_encrypt;
+};
+
+/**
* struct beacon_parameters - beacon parameters
*
* Used to configure the beacon for an interface.
@@ -351,11 +376,38 @@ struct survey_info {
* @dtim_period: DTIM period or zero if not changed
* @head_len: length of @head
* @tail_len: length of @tail
+ * @ssid: SSID to be used in the BSS (note: may be %NULL if not provided from
+ * user space)
+ * @ssid_len: length of @ssid
+ * @hidden_ssid: whether to hide the SSID in Beacon/Probe Response frames
+ * @crypto: crypto settings
+ * @privacy: the BSS uses privacy
+ * @auth_type: Authentication type (algorithm)
+ * @beacon_ies: extra information element(s) to add into Beacon frames or %NULL
+ * @beacon_ies_len: length of beacon_ies in octets
+ * @proberesp_ies: extra information element(s) to add into Probe Response
+ * frames or %NULL
+ * @proberesp_ies_len: length of proberesp_ies in octets
+ * @assocresp_ies: extra information element(s) to add into (Re)Association
+ * Response frames or %NULL
+ * @assocresp_ies_len: length of assocresp_ies in octets
*/
struct beacon_parameters {
u8 *head, *tail;
int interval, dtim_period;
int head_len, tail_len;
+ const u8 *ssid;
+ size_t ssid_len;
+ enum nl80211_hidden_ssid hidden_ssid;
+ struct cfg80211_crypto_settings crypto;
+ bool privacy;
+ enum nl80211_auth_type auth_type;
+ const u8 *beacon_ies;
+ size_t beacon_ies_len;
+ const u8 *proberesp_ies;
+ size_t proberesp_ies_len;
+ const u8 *assocresp_ies;
+ size_t assocresp_ies_len;
};
/**
@@ -372,6 +424,17 @@ enum plink_actions {
};
/**
+ * enum station_parameters_apply_mask - station parameter values to apply
+ * @STATION_PARAM_APPLY_UAPSD: apply new uAPSD parameters (uapsd_queues, max_sp)
+ *
+ * Not all station parameters have in-band "no change" signalling,
+ * for those that don't these flags will are used.
+ */
+enum station_parameters_apply_mask {
+ STATION_PARAM_APPLY_UAPSD = BIT(0),
+};
+
+/**
* struct station_parameters - station parameters
*
* Used to change and create a new station.
@@ -389,17 +452,24 @@ enum plink_actions {
* @plink_action: plink action to take
* @plink_state: set the peer link state for a station
* @ht_capa: HT capabilities of station
+ * @uapsd_queues: bitmap of queues configured for uapsd. same format
+ * as the AC bitmap in the QoS info field
+ * @max_sp: max Service Period. same format as the MAX_SP in the
+ * QoS info field (but already shifted down)
*/
struct station_parameters {
u8 *supported_rates;
struct net_device *vlan;
u32 sta_flags_mask, sta_flags_set;
+ u32 sta_modify_mask;
int listen_interval;
u16 aid;
u8 supported_rates_len;
u8 plink_action;
u8 plink_state;
struct ieee80211_ht_cap *ht_capa;
+ u8 uapsd_queues;
+ u8 max_sp;
};
/**
@@ -426,6 +496,8 @@ struct station_parameters {
* @STATION_INFO_RX_BITRATE: @rxrate fields are filled
* @STATION_INFO_BSS_PARAM: @bss_param filled
* @STATION_INFO_CONNECTED_TIME: @connected_time filled
+ * @STATION_INFO_ASSOC_REQ_IES: @assoc_req_ies filled
+ * @STATION_INFO_STA_FLAGS: @sta_flags filled
*/
enum station_info_flags {
STATION_INFO_INACTIVE_TIME = 1<<0,
@@ -444,7 +516,9 @@ enum station_info_flags {
STATION_INFO_SIGNAL_AVG = 1<<13,
STATION_INFO_RX_BITRATE = 1<<14,
STATION_INFO_BSS_PARAM = 1<<15,
- STATION_INFO_CONNECTED_TIME = 1<<16
+ STATION_INFO_CONNECTED_TIME = 1<<16,
+ STATION_INFO_ASSOC_REQ_IES = 1<<17,
+ STATION_INFO_STA_FLAGS = 1<<18
};
/**
@@ -536,6 +610,11 @@ struct sta_bss_parameters {
* This number should increase every time the list of stations
* changes, i.e. when a station is added or removed, so that
* userspace can tell whether it got a consistent snapshot.
+ * @assoc_req_ies: IEs from (Re)Association Request.
+ * This is used only when in AP mode with drivers that do not use
+ * user space MLME/SME implementation. The information is provided for
+ * the cfg80211_new_sta() calls to notify user space of the IEs.
+ * @assoc_req_ies_len: Length of assoc_req_ies buffer in octets.
*/
struct station_info {
u32 filled;
@@ -556,8 +635,17 @@ struct station_info {
u32 tx_failed;
u32 rx_dropped_misc;
struct sta_bss_parameters bss_param;
+ struct nl80211_sta_flag_update sta_flags;
int generation;
+
+ const u8 *assoc_req_ies;
+ size_t assoc_req_ies_len;
+
+ /*
+ * Note: Add a new enum station_info_flags value for each new field and
+ * use it to check which fields are initialized.
+ */
};
/**
@@ -688,6 +776,12 @@ struct mesh_config {
u16 dot11MeshHWMPpreqMinInterval;
u16 dot11MeshHWMPnetDiameterTraversalTime;
u8 dot11MeshHWMPRootMode;
+ u16 dot11MeshHWMPRannInterval;
+ /* This is missnamed in draft 12.0: dot11MeshGateAnnouncementProtocol
+ * set to true only means that the station will announce others it's a
+ * mesh gate, but not necessarily using the gate announcement protocol.
+ * Still keeping the same nomenclature to be in sync with the spec. */
+ bool dot11MeshGateAnnouncementProtocol;
};
/**
@@ -781,6 +875,7 @@ struct cfg80211_ssid {
* @wiphy: the wiphy this was for
* @dev: the interface
* @aborted: (internal) scan request was notified as aborted
+ * @no_cck: used to send probe requests at non CCK rate in 2GHz band
*/
struct cfg80211_scan_request {
struct cfg80211_ssid *ssids;
@@ -795,12 +890,22 @@ struct cfg80211_scan_request {
struct wiphy *wiphy;
struct net_device *dev;
bool aborted;
+ bool no_cck;
/* keep last */
struct ieee80211_channel *channels[0];
};
/**
+ * struct cfg80211_match_set - sets of attributes to match
+ *
+ * @ssid: SSID to be matched
+ */
+struct cfg80211_match_set {
+ struct cfg80211_ssid ssid;
+};
+
+/**
* struct cfg80211_sched_scan_request - scheduled scan request description
*
* @ssids: SSIDs to scan for (passed in the probe_reqs in active scans)
@@ -809,6 +914,11 @@ struct cfg80211_scan_request {
* @interval: interval between each scheduled scan cycle
* @ie: optional information element(s) to add into Probe Request or %NULL
* @ie_len: length of ie in octets
+ * @match_sets: sets of parameters to be matched for a scan result
+ * entry to be considered valid and to be passed to the host
+ * (others are filtered out).
+ * If ommited, all results are passed.
+ * @n_match_sets: number of match sets
* @wiphy: the wiphy this was for
* @dev: the interface
* @channels: channels to scan
@@ -820,6 +930,8 @@ struct cfg80211_sched_scan_request {
u32 interval;
const u8 *ie;
size_t ie_len;
+ struct cfg80211_match_set *match_sets;
+ int n_match_sets;
/* internal */
struct wiphy *wiphy;
@@ -896,36 +1008,6 @@ const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie);
/**
- * struct cfg80211_crypto_settings - Crypto settings
- * @wpa_versions: indicates which, if any, WPA versions are enabled
- * (from enum nl80211_wpa_versions)
- * @cipher_group: group key cipher suite (or 0 if unset)
- * @n_ciphers_pairwise: number of AP supported unicast ciphers
- * @ciphers_pairwise: unicast key cipher suites
- * @n_akm_suites: number of AKM suites
- * @akm_suites: AKM suites
- * @control_port: Whether user space controls IEEE 802.1X port, i.e.,
- * sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is
- * required to assume that the port is unauthorized until authorized by
- * user space. Otherwise, port is marked authorized by default.
- * @control_port_ethertype: the control port protocol that should be
- * allowed through even on unauthorized ports
- * @control_port_no_encrypt: TRUE to prevent encryption of control port
- * protocol frames.
- */
-struct cfg80211_crypto_settings {
- u32 wpa_versions;
- u32 cipher_group;
- int n_ciphers_pairwise;
- u32 ciphers_pairwise[NL80211_MAX_NR_CIPHER_SUITES];
- int n_akm_suites;
- u32 akm_suites[NL80211_MAX_NR_AKM_SUITES];
- bool control_port;
- __be16 control_port_ethertype;
- bool control_port_no_encrypt;
-};
-
-/**
* struct cfg80211_auth_request - Authentication request data
*
* This structure provides information needed to complete IEEE 802.11
@@ -1343,6 +1425,9 @@ struct cfg80211_gtk_rekey_data {
* @set_ringparam: Set tx and rx ring sizes.
*
* @get_ringparam: Get tx and rx ring current and maximum sizes.
+ *
+ * @tdls_mgmt: Transmit a TDLS management frame.
+ * @tdls_oper: Perform a high-level TDLS operation (e.g. TDLS link setup).
*/
struct cfg80211_ops {
int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
@@ -1419,7 +1504,7 @@ struct cfg80211_ops {
int (*change_bss)(struct wiphy *wiphy, struct net_device *dev,
struct bss_parameters *params);
- int (*set_txq_params)(struct wiphy *wiphy,
+ int (*set_txq_params)(struct wiphy *wiphy, struct net_device *dev,
struct ieee80211_txq_params *params);
int (*set_channel)(struct wiphy *wiphy, struct net_device *dev,
@@ -1495,7 +1580,8 @@ struct cfg80211_ops {
struct ieee80211_channel *chan, bool offchan,
enum nl80211_channel_type channel_type,
bool channel_type_valid, unsigned int wait,
- const u8 *buf, size_t len, u64 *cookie);
+ const u8 *buf, size_t len, bool no_cck,
+ u64 *cookie);
int (*mgmt_tx_cancel_wait)(struct wiphy *wiphy,
struct net_device *dev,
u64 cookie);
@@ -1525,6 +1611,12 @@ struct cfg80211_ops {
int (*set_rekey_data)(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_gtk_rekey_data *data);
+
+ int (*tdls_mgmt)(struct wiphy *wiphy, struct net_device *dev,
+ u8 *peer, u8 action_code, u8 dialog_token,
+ u16 status_code, const u8 *buf, size_t len);
+ int (*tdls_oper)(struct wiphy *wiphy, struct net_device *dev,
+ u8 *peer, enum nl80211_tdls_operation oper);
};
/*
@@ -1574,6 +1666,15 @@ struct cfg80211_ops {
* @WIPHY_FLAG_MESH_AUTH: The device supports mesh authentication by routing
* auth frames to userspace. See @NL80211_MESH_SETUP_USERSPACE_AUTH.
* @WIPHY_FLAG_SUPPORTS_SCHED_SCAN: The device supports scheduled scans.
+ * @WIPHY_FLAG_SUPPORTS_FW_ROAM: The device supports roaming feature in the
+ * firmware.
+ * @WIPHY_FLAG_AP_UAPSD: The device supports uapsd on AP.
+ * @WIPHY_FLAG_SUPPORTS_TDLS: The device supports TDLS (802.11z) operation.
+ * @WIPHY_FLAG_TDLS_EXTERNAL_SETUP: The device does not handle TDLS (802.11z)
+ * link setup/discovery operations internally. Setup, discovery and
+ * teardown packets should be sent through the @NL80211_CMD_TDLS_MGMT
+ * command. When this flag is not set, @NL80211_CMD_TDLS_OPER should be
+ * used for asking the driver/firmware to perform a TDLS operation.
*/
enum wiphy_flags {
WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0),
@@ -1588,6 +1689,10 @@ enum wiphy_flags {
WIPHY_FLAG_MESH_AUTH = BIT(10),
WIPHY_FLAG_SUPPORTS_SCHED_SCAN = BIT(11),
WIPHY_FLAG_ENFORCE_COMBINATIONS = BIT(12),
+ WIPHY_FLAG_SUPPORTS_FW_ROAM = BIT(13),
+ WIPHY_FLAG_AP_UAPSD = BIT(14),
+ WIPHY_FLAG_SUPPORTS_TDLS = BIT(15),
+ WIPHY_FLAG_TDLS_EXTERNAL_SETUP = BIT(16),
};
/**
@@ -1744,9 +1849,12 @@ struct wiphy_wowlan_support {
* by default for perm_addr. In this case, the mask should be set to
* all-zeroes. In this case it is assumed that the device can handle
* the same number of arbitrary MAC addresses.
+ * @registered: protects ->resume and ->suspend sysfs callbacks against
+ * unregister hardware
* @debugfsdir: debugfs directory used for this wiphy, will be renamed
* automatically on wiphy renames
* @dev: (virtual) struct device for this wiphy
+ * @registered: helps synchronize suspend/resume with wiphy unregister
* @wext: wireless extension handlers
* @priv: driver private data (sized according to wiphy_new() parameter)
* @interface_modes: bitmask of interfaces types valid for this wiphy,
@@ -1763,6 +1871,9 @@ struct wiphy_wowlan_support {
* any given scan
* @max_sched_scan_ssids: maximum number of SSIDs the device can scan
* for in any given scheduled scan
+ * @max_match_sets: maximum number of match sets the device can handle
+ * when performing a scheduled scan, 0 if filtering is not
+ * supported.
* @max_scan_ie_len: maximum length of user-controlled IEs device can
* add to probe request frames transmitted during a scan, must not
* include fixed IEs like supported rates
@@ -1820,6 +1931,7 @@ struct wiphy {
int bss_priv_size;
u8 max_scan_ssids;
u8 max_sched_scan_ssids;
+ u8 max_match_sets;
u16 max_scan_ie_len;
u16 max_sched_scan_ie_len;
@@ -1865,6 +1977,9 @@ struct wiphy {
* you need use set_wiphy_dev() (see below) */
struct device dev;
+ /* protects ->resume, ->suspend sysfs callbacks against unregister hw */
+ bool registered;
+
/* dir in debugfs: ieee80211/<wiphyname> */
struct dentry *debugfsdir;
@@ -2230,6 +2345,69 @@ extern int ieee80211_radiotap_iterator_next(
extern const unsigned char rfc1042_header[6];
extern const unsigned char bridge_tunnel_header[6];
+/* Parsed Information Elements */
+struct ieee802_11_elems {
+ u8 *ie_start;
+ size_t total_len;
+
+ /* pointers to IEs */
+ u8 *ssid;
+ u8 *supp_rates;
+ u8 *fh_params;
+ u8 *ds_params;
+ u8 *cf_params;
+ struct ieee80211_tim_ie *tim;
+ u8 *ibss_params;
+ u8 *challenge;
+ u8 *wpa;
+ u8 *rsn;
+ u8 *erp_info;
+ u8 *ext_supp_rates;
+ u8 *wmm_info;
+ u8 *wmm_param;
+ struct ieee80211_ht_cap *ht_cap_elem;
+ struct ieee80211_ht_info *ht_info_elem;
+ struct ieee80211_meshconf_ie *mesh_config;
+ u8 *mesh_id;
+ u8 *peering;
+ u8 *preq;
+ u8 *prep;
+ u8 *perr;
+ struct ieee80211_rann_ie *rann;
+ u8 *ch_switch_elem;
+ u8 *country_elem;
+ u8 *pwr_constr_elem;
+ u8 *quiet_elem; /* first quite element */
+ u8 *timeout_int;
+
+ /* length of them, respectively */
+ u8 ssid_len;
+ u8 supp_rates_len;
+ u8 fh_params_len;
+ u8 ds_params_len;
+ u8 cf_params_len;
+ u8 tim_len;
+ u8 ibss_params_len;
+ u8 challenge_len;
+ u8 wpa_len;
+ u8 rsn_len;
+ u8 erp_info_len;
+ u8 ext_supp_rates_len;
+ u8 wmm_info_len;
+ u8 wmm_param_len;
+ u8 mesh_id_len;
+ u8 peering_len;
+ u8 preq_len;
+ u8 prep_len;
+ u8 perr_len;
+ u8 ch_switch_elem_len;
+ u8 country_elem_len;
+ u8 pwr_constr_elem_len;
+ u8 quiet_elem_len;
+ u8 num_of_quiet_elem; /* can be more the one */
+ u8 timeout_int_len;
+};
+
/**
* ieee80211_get_hdrlen_from_skb - get header length from data
*
@@ -2319,6 +2497,24 @@ unsigned int cfg80211_classify8021d(struct sk_buff *skb);
const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len);
/**
+ * cfg80211_find_vendor_ie - find vendor specific information element in data
+ *
+ * @oui: vendor OUI
+ * @oui_type: vendor-specific OUI type
+ * @ies: data consisting of IEs
+ * @len: length of data
+ *
+ * This function will return %NULL if the vendor specific element ID
+ * could not be found or if the element is invalid (claims to be
+ * longer than the given data), or a pointer to the first byte
+ * of the requested element, that is the byte containing the
+ * element ID. There are no checks on the element length
+ * other than having to fit into the given data.
+ */
+const u8 *cfg80211_find_vendor_ie(unsigned int oui, u8 oui_type,
+ const u8 *ies, int len);
+
+/**
* DOC: Regulatory enforcement infrastructure
*
* TODO
@@ -2393,113 +2589,6 @@ extern int freq_reg_info(struct wiphy *wiphy,
const struct ieee80211_reg_rule **reg_rule);
/*
- * Temporary wext handlers & helper functions
- *
- * In the future cfg80211 will simply assign the entire wext handler
- * structure to netdevs it manages, but we're not there yet.
- */
-int cfg80211_wext_giwname(struct net_device *dev,
- struct iw_request_info *info,
- char *name, char *extra);
-int cfg80211_wext_siwmode(struct net_device *dev, struct iw_request_info *info,
- u32 *mode, char *extra);
-int cfg80211_wext_giwmode(struct net_device *dev, struct iw_request_info *info,
- u32 *mode, char *extra);
-int cfg80211_wext_siwscan(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra);
-int cfg80211_wext_giwscan(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *data, char *extra);
-int cfg80211_wext_siwmlme(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *data, char *extra);
-int cfg80211_wext_giwrange(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *data, char *extra);
-int cfg80211_wext_siwgenie(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *data, char *extra);
-int cfg80211_wext_siwauth(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *data, char *extra);
-int cfg80211_wext_giwauth(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *data, char *extra);
-
-int cfg80211_wext_siwfreq(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_freq *freq, char *extra);
-int cfg80211_wext_giwfreq(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_freq *freq, char *extra);
-int cfg80211_wext_siwessid(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *data, char *ssid);
-int cfg80211_wext_giwessid(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *data, char *ssid);
-int cfg80211_wext_siwrate(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *rate, char *extra);
-int cfg80211_wext_giwrate(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *rate, char *extra);
-
-int cfg80211_wext_siwrts(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *rts, char *extra);
-int cfg80211_wext_giwrts(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *rts, char *extra);
-int cfg80211_wext_siwfrag(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *frag, char *extra);
-int cfg80211_wext_giwfrag(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *frag, char *extra);
-int cfg80211_wext_siwretry(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *retry, char *extra);
-int cfg80211_wext_giwretry(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *retry, char *extra);
-int cfg80211_wext_siwencodeext(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *erq, char *extra);
-int cfg80211_wext_siwencode(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *erq, char *keybuf);
-int cfg80211_wext_giwencode(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *erq, char *keybuf);
-int cfg80211_wext_siwtxpower(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *data, char *keybuf);
-int cfg80211_wext_giwtxpower(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *data, char *keybuf);
-struct iw_statistics *cfg80211_wireless_stats(struct net_device *dev);
-
-int cfg80211_wext_siwpower(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *wrq, char *extra);
-int cfg80211_wext_giwpower(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *wrq, char *extra);
-
-int cfg80211_wext_siwap(struct net_device *dev,
- struct iw_request_info *info,
- struct sockaddr *ap_addr, char *extra);
-int cfg80211_wext_giwap(struct net_device *dev,
- struct iw_request_info *info,
- struct sockaddr *ap_addr, char *extra);
-
-int cfg80211_wext_siwpmksa(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *data, char *extra);
-
-/*
* callbacks for asynchronous cfg80211 methods, notification
* functions and BSS handling helpers
*/
@@ -3085,6 +3174,17 @@ void cfg80211_cqm_pktloss_notify(struct net_device *dev,
void cfg80211_gtk_rekey_notify(struct net_device *dev, const u8 *bssid,
const u8 *replay_ctr, gfp_t gfp);
+/**
+ * cfg80211_pmksa_candidate_notify - notify about PMKSA caching candidate
+ * @dev: network device
+ * @index: candidate index (the smaller the index, the higher the priority)
+ * @bssid: BSSID of AP
+ * @preauth: Whether AP advertises support for RSN pre-authentication
+ * @gfp: allocation flags
+ */
+void cfg80211_pmksa_candidate_notify(struct net_device *dev, int index,
+ const u8 *bssid, bool preauth, gfp_t gfp);
+
/* Logging, debugging and troubleshooting/diagnostic helpers. */
/* wiphy_printk helpers, similar to dev_printk */