diff options
Diffstat (limited to 'include/net')
| -rw-r--r-- | include/net/bluetooth/bluetooth.h | 8 | ||||
| -rw-r--r-- | include/net/bluetooth/hci.h | 7 | ||||
| -rw-r--r-- | include/net/bluetooth/hci_core.h | 10 | ||||
| -rw-r--r-- | include/net/bluetooth/sco.h | 1 | ||||
| -rw-r--r-- | include/net/cfg80211.h | 8 | ||||
| -rw-r--r-- | include/net/mac80211.h | 110 | ||||
| -rw-r--r-- | include/net/nfc/nfc.h | 3 |
7 files changed, 137 insertions, 10 deletions
diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h index 10eb9b38901..10d43d8c703 100644 --- a/include/net/bluetooth/bluetooth.h +++ b/include/net/bluetooth/bluetooth.h @@ -107,6 +107,14 @@ struct bt_power { */ #define BT_CHANNEL_POLICY_AMP_PREFERRED 2 +#define BT_VOICE 11 +struct bt_voice { + __u16 setting; +}; + +#define BT_VOICE_TRANSPARENT 0x0003 +#define BT_VOICE_CVSD_16BIT 0x0060 + __printf(1, 2) int bt_info(const char *fmt, ...); __printf(1, 2) diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index 3c592cf473d..aaeaf0938ec 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -238,6 +238,7 @@ enum { #define LMP_CVSD 0x01 #define LMP_PSCHEME 0x02 #define LMP_PCONTROL 0x04 +#define LMP_TRANSPARENT 0x08 #define LMP_RSSI_INQ 0x40 #define LMP_ESCO 0x80 @@ -296,6 +297,12 @@ enum { #define HCI_AT_GENERAL_BONDING 0x04 #define HCI_AT_GENERAL_BONDING_MITM 0x05 +/* I/O capabilities */ +#define HCI_IO_DISPLAY_ONLY 0x00 +#define HCI_IO_DISPLAY_YESNO 0x01 +#define HCI_IO_KEYBOARD_ONLY 0x02 +#define HCI_IO_NO_INPUT_OUTPUT 0x03 + /* Link Key types */ #define HCI_LK_COMBINATION 0x00 #define HCI_LK_LOCAL_UNIT 0x01 diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index f77885ea78c..3ede820d328 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -320,6 +320,7 @@ struct hci_conn { __u32 passkey_notify; __u8 passkey_entered; __u16 disc_timeout; + __u16 setting; unsigned long flags; __u8 remote_cap; @@ -569,7 +570,7 @@ static inline struct hci_conn *hci_conn_hash_lookup_state(struct hci_dev *hdev, } void hci_disconnect(struct hci_conn *conn, __u8 reason); -void hci_setup_sync(struct hci_conn *conn, __u16 handle); +bool hci_setup_sync(struct hci_conn *conn, __u16 handle); void hci_sco_setup(struct hci_conn *conn, __u8 status); struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst); @@ -584,6 +585,8 @@ struct hci_chan *hci_chan_lookup_handle(struct hci_dev *hdev, __u16 handle); struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8 dst_type, __u8 sec_level, __u8 auth_type); +struct hci_conn *hci_connect_sco(struct hci_dev *hdev, int type, bdaddr_t *dst, + __u16 setting); int hci_conn_check_link_mode(struct hci_conn *conn); int hci_conn_check_secure(struct hci_conn *conn, __u8 sec_level); int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type); @@ -797,6 +800,7 @@ void hci_conn_del_sysfs(struct hci_conn *conn); #define lmp_lsto_capable(dev) ((dev)->features[0][7] & LMP_LSTO) #define lmp_inq_tx_pwr_capable(dev) ((dev)->features[0][7] & LMP_INQ_TX_PWR) #define lmp_ext_feat_capable(dev) ((dev)->features[0][7] & LMP_EXTFEATURES) +#define lmp_transp_capable(dev) ((dev)->features[0][2] & LMP_TRANSPARENT) /* ----- Extended LMP capabilities ----- */ #define lmp_host_ssp_capable(dev) ((dev)->features[1][0] & LMP_HOST_SSP) @@ -1213,4 +1217,8 @@ void hci_le_start_enc(struct hci_conn *conn, __le16 ediv, __u8 rand[8], u8 bdaddr_to_le(u8 bdaddr_type); +#define SCO_AIRMODE_MASK 0x0003 +#define SCO_AIRMODE_CVSD 0x0000 +#define SCO_AIRMODE_TRANSP 0x0003 + #endif /* __HCI_CORE_H */ diff --git a/include/net/bluetooth/sco.h b/include/net/bluetooth/sco.h index 1e35c43657c..e252a31ee6b 100644 --- a/include/net/bluetooth/sco.h +++ b/include/net/bluetooth/sco.h @@ -73,6 +73,7 @@ struct sco_conn { struct sco_pinfo { struct bt_sock bt; __u32 flags; + __u16 setting; struct sco_conn *conn; }; diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 635e396b25b..cb710913d5c 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -2081,7 +2081,7 @@ struct cfg80211_update_ft_ies_params { * @mgmt_tx_cancel_wait: Cancel the wait time from transmitting a management * frame on another channel * - * @testmode_cmd: run a test mode command + * @testmode_cmd: run a test mode command; @wdev may be %NULL * @testmode_dump: Implement a test mode dump. The cb->args[2] and up may be * used by the function, but 0 and 1 must not be touched. Additionally, * return error codes other than -ENOBUFS and -ENOENT will terminate the @@ -2290,7 +2290,8 @@ struct cfg80211_ops { void (*rfkill_poll)(struct wiphy *wiphy); #ifdef CONFIG_NL80211_TESTMODE - int (*testmode_cmd)(struct wiphy *wiphy, void *data, int len); + int (*testmode_cmd)(struct wiphy *wiphy, struct wireless_dev *wdev, + void *data, int len); int (*testmode_dump)(struct wiphy *wiphy, struct sk_buff *skb, struct netlink_callback *cb, void *data, int len); @@ -4055,6 +4056,7 @@ void cfg80211_conn_failed(struct net_device *dev, const u8 *mac_addr, * @sig_dbm: signal strength in mBm, or 0 if unknown * @buf: Management frame (header + body) * @len: length of the frame data + * @flags: flags, as defined in enum nl80211_rxmgmt_flags * @gfp: context flags * * This function is called whenever an Action frame is received for a station @@ -4066,7 +4068,7 @@ void cfg80211_conn_failed(struct net_device *dev, const u8 *mac_addr, * driver is responsible for rejecting the frame. */ bool cfg80211_rx_mgmt(struct wireless_dev *wdev, int freq, int sig_dbm, - const u8 *buf, size_t len, gfp_t gfp); + const u8 *buf, size_t len, u32 flags, gfp_t gfp); /** * cfg80211_mgmt_tx_status - notification of TX status for management frame diff --git a/include/net/mac80211.h b/include/net/mac80211.h index ab94dbc331a..cc6035f1a2f 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -375,7 +375,7 @@ struct ieee80211_bss_conf { }; /** - * enum mac80211_tx_control_flags - flags to describe transmission information/status + * enum mac80211_tx_info_flags - flags to describe transmission information/status * * These flags are used with the @flags member of &ieee80211_tx_info. * @@ -471,7 +471,7 @@ struct ieee80211_bss_conf { * Note: If you have to add new flags to the enumeration, then don't * forget to update %IEEE80211_TX_TEMPORARY_FLAGS when necessary. */ -enum mac80211_tx_control_flags { +enum mac80211_tx_info_flags { IEEE80211_TX_CTL_REQ_TX_STATUS = BIT(0), IEEE80211_TX_CTL_ASSIGN_SEQ = BIT(1), IEEE80211_TX_CTL_NO_ACK = BIT(2), @@ -507,6 +507,18 @@ enum mac80211_tx_control_flags { #define IEEE80211_TX_CTL_STBC_SHIFT 23 +/** + * enum mac80211_tx_control_flags - flags to describe transmit control + * + * @IEEE80211_TX_CTRL_PORT_CTRL_PROTO: this frame is a port control + * protocol frame (e.g. EAP) + * + * These flags are used in tx_info->control.flags. + */ +enum mac80211_tx_control_flags { + IEEE80211_TX_CTRL_PORT_CTRL_PROTO = BIT(0), +}; + /* * This definition is used as a mask to clear all temporary flags, which are * set by the tx handlers for each transmission attempt by the mac80211 stack. @@ -680,7 +692,8 @@ struct ieee80211_tx_info { /* NB: vif can be NULL for injected frames */ struct ieee80211_vif *vif; struct ieee80211_key_conf *hw_key; - /* 8 bytes free */ + u32 flags; + /* 4 bytes free */ } control; struct { struct ieee80211_tx_rate rates[IEEE80211_TX_MAX_RATES]; @@ -1508,6 +1521,7 @@ enum ieee80211_hw_flags { IEEE80211_HW_SUPPORTS_RC_TABLE = 1<<24, IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF = 1<<25, IEEE80211_HW_TIMING_BEACON_ONLY = 1<<26, + IEEE80211_HW_SUPPORTS_HT_CCK_RATES = 1<<27, }; /** @@ -2503,8 +2517,8 @@ enum ieee80211_roc_type { * in IEEE 802.11-2007 section 17.3.8.6 and modify ACK timeout * accordingly. This callback is not required and may sleep. * - * @testmode_cmd: Implement a cfg80211 test mode command. - * The callback can sleep. + * @testmode_cmd: Implement a cfg80211 test mode command. The passed @vif may + * be %NULL. The callback can sleep. * @testmode_dump: Implement a cfg80211 test mode dump. The callback can sleep. * * @flush: Flush all pending frames from the hardware queue, making sure @@ -2765,7 +2779,8 @@ struct ieee80211_ops { void (*rfkill_poll)(struct ieee80211_hw *hw); void (*set_coverage_class)(struct ieee80211_hw *hw, u8 coverage_class); #ifdef CONFIG_NL80211_TESTMODE - int (*testmode_cmd)(struct ieee80211_hw *hw, void *data, int len); + int (*testmode_cmd)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + void *data, int len); int (*testmode_dump)(struct ieee80211_hw *hw, struct sk_buff *skb, struct netlink_callback *cb, void *data, int len); @@ -3674,6 +3689,89 @@ void ieee80211_get_key_rx_seq(struct ieee80211_key_conf *keyconf, int tid, struct ieee80211_key_seq *seq); /** + * ieee80211_set_key_tx_seq - set key TX sequence counter + * + * @keyconf: the parameter passed with the set key + * @seq: new sequence data + * + * This function allows a driver to set the current TX IV/PNs for the + * given key. This is useful when resuming from WoWLAN sleep and the + * device may have transmitted frames using the PTK, e.g. replies to + * ARP requests. + * + * Note that this function may only be called when no TX processing + * can be done concurrently. + */ +void ieee80211_set_key_tx_seq(struct ieee80211_key_conf *keyconf, + struct ieee80211_key_seq *seq); + +/** + * ieee80211_set_key_rx_seq - set key RX sequence counter + * + * @keyconf: the parameter passed with the set key + * @tid: The TID, or -1 for the management frame value (CCMP only); + * the value on TID 0 is also used for non-QoS frames. For + * CMAC, only TID 0 is valid. + * @seq: new sequence data + * + * This function allows a driver to set the current RX IV/PNs for the + * given key. This is useful when resuming from WoWLAN sleep and GTK + * rekey may have been done while suspended. It should not be called + * if IV checking is done by the device and not by mac80211. + * + * Note that this function may only be called when no RX processing + * can be done concurrently. + */ +void ieee80211_set_key_rx_seq(struct ieee80211_key_conf *keyconf, + int tid, struct ieee80211_key_seq *seq); + +/** + * ieee80211_remove_key - remove the given key + * @keyconf: the parameter passed with the set key + * + * Remove the given key. If the key was uploaded to the hardware at the + * time this function is called, it is not deleted in the hardware but + * instead assumed to have been removed already. + * + * Note that due to locking considerations this function can (currently) + * only be called during key iteration (ieee80211_iter_keys().) + */ +void ieee80211_remove_key(struct ieee80211_key_conf *keyconf); + +/** + * ieee80211_gtk_rekey_add - add a GTK key from rekeying during WoWLAN + * @vif: the virtual interface to add the key on + * @keyconf: new key data + * + * When GTK rekeying was done while the system was suspended, (a) new + * key(s) will be available. These will be needed by mac80211 for proper + * RX processing, so this function allows setting them. + * + * The function returns the newly allocated key structure, which will + * have similar contents to the passed key configuration but point to + * mac80211-owned memory. In case of errors, the function returns an + * ERR_PTR(), use IS_ERR() etc. + * + * Note that this function assumes the key isn't added to hardware + * acceleration, so no TX will be done with the key. Since it's a GTK + * on managed (station) networks, this is true anyway. If the driver + * calls this function from the resume callback and subsequently uses + * the return code 1 to reconfigure the device, this key will be part + * of the reconfiguration. + * + * Note that the driver should also call ieee80211_set_key_rx_seq() + * for the new key for each TID to set up sequence counters properly. + * + * IMPORTANT: If this replaces a key that is present in the hardware, + * then it will attempt to remove it during this call. In many cases + * this isn't what you want, so call ieee80211_remove_key() first for + * the key that's being replaced. + */ +struct ieee80211_key_conf * +ieee80211_gtk_rekey_add(struct ieee80211_vif *vif, + struct ieee80211_key_conf *keyconf); + +/** * ieee80211_gtk_rekey_notify - notify userspace supplicant of rekeying * @vif: virtual interface the rekeying was done on * @bssid: The BSSID of the AP, for checking association diff --git a/include/net/nfc/nfc.h b/include/net/nfc/nfc.h index 5f286b726bb..f68ee68e4e3 100644 --- a/include/net/nfc/nfc.h +++ b/include/net/nfc/nfc.h @@ -224,6 +224,9 @@ int nfc_set_remote_general_bytes(struct nfc_dev *dev, u8 *gt, u8 gt_len); u8 *nfc_get_local_general_bytes(struct nfc_dev *dev, size_t *gb_len); +int nfc_fw_download_done(struct nfc_dev *dev, const char *firmware_name, + u32 result); + int nfc_targets_found(struct nfc_dev *dev, struct nfc_target *targets, int ntargets); int nfc_target_lost(struct nfc_dev *dev, u32 target_idx); |